THIS IS A COMPLETED SALE
View current listings by this company

Landmark Wood Products - Sawmill Equipment - English, IN
Previous Page Listing ID#: 1597828

Auction Location
English, IN 47118

Auction Dates and TimesSALE IS COMPLETED
Wednesday Apr 24, 2024 Completed

Auction Type
Live Auction

Company Information
Bright Star Realty and Auctions, INC Contact: Loren Beachy Phone: 574-825-0704 Email: beachyauctions@gmail.com Website: brightstarauctions.com GoToAuction.com ID#: 5286 View company information and listings

Free Email Notifications

Sign up for the GoToAuction.com email notifications and we will let you know about sales in your area! You may set up alerts by area (zip and radius), keywords, and by company. It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions
Bidder Terms and Conditions There is a 13% online buyer’s premium in effect for all purchases made online. Buyer’s premium is 10% for onsite bidders. All items sell where is as is with no warranties or guarantees. Buyer is responsible to inspect all merchandise prior to placing bids. Payment terms: Cash, check, wire transfer. Cash Payments totaling $10,000 or more will not be accepted. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice. Onsite buyers, payment is due the day of the auction. If onsite bidders wish to send a wire and still be assessed only the onsite buyer’s premium, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. All items are pick-up only. Smalls must be removed within 2 days. All items must be removed within 30 days unless otherwise noted. Loadout available day of auction, after that by appointment. Please call agent for more info. Buyer shall assume responsibility of all property when auctioneer says sold. Auction company is not responsible for any missing or stolen items. These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer. Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms. Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded where required. Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer: “Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction. “Absentee Bidder” means a person or entity that submits an Absentee Bid. “Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION. “Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids. “Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected. “Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder. “Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms. “Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer. "Buyer" means the Winning Bidder with respect to each Lot of Personal Property. "Buyer's Premium" is an amount with respect to each Lot of Personal Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account. “Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation. “Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer. “High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot. “High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on the Lot put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price. “High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot. "Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event. “Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer. “No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale. “Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions. “Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online. "Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered. “Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers. “Personal Property” means all tangible and moveable property, including fixtures, designated as Property. “Pick-up” means the act of picking up or removing sold Lots by respective Winning Bidders at the date(s), time(s), and location indicated for such during the Auction or as later agreed to by Seller and Buyer. “Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer). “Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms-length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction. “Property” means the Real Property and the Personal Property. “Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium. "Registered Bidder" means a person or entity that has registered to bid at the Auction. “Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction. “Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE. “Reserve Price” means the minimum price that Seller is willing to accept for specific Property. “Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer. “Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid. “Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by Seller). "Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid. “Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction. Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration. Governing Law. For Auctions in the State of Indiana and Online. Unless otherwise indicated, all Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are deemed to be entered into in the State of Indiana, all bids and payments are deemed to be received in the State of Indiana, and the contract, if any, will be deemed to be formed and entered into in the State of Indiana. Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium. Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion. Nature of the Auction. This Property is being sold at the Auction in the manner indicated on the first page of this Agreement. Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms. No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer. Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online: Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties, (i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer. No Reduction or Retraction of Online Bids. Online bids may not be reduced or retracted. Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification. Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). All prebids and maxbids placed online are considered absentee bids. Auctioneer pledges complete integrity in the treatment of absentee bids and absentee bids may be initiated and advanced in accordance with Auctioneer’s policies and procedures. Auctioneer has the right to initiate any absentee bids at 25% to 50% of their maximum amount. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder. Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion. Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder. Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction. Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot of Personal Property will be the Buyer of such Property. All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING. Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings. Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property. Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or representation by Auctioneer. Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller. Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction. Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ringman, or multiple bid assistants or ringmen, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid. Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer. All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS. Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked-Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made. Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases are due upon receipt of your invoice. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. Cash payments totaling Ten Thousand Dollars ($10,000) or more will not be accepted. If onsite bidders wish to send a wire, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion. Wire Transfer Payments. Buyer shall obtain verbal verification of all bank account information from Bright Star Auctions prior to initiating transfer. Except as otherwise provided by law, we shall not be liable for any loss or damage due to misplaced, unauthorized or fraudulent fund transfers. ACH/eCheck Payments. By providing account information to Bright Star Auctions, buyer gives permission for Bright Star Auctions to retain payment information on file and represents they are the authorized account holder. Upon authorization to collect payment from Buyer’s account and prior to transfer, Buyer is responsible to notify their financial institution of the impending transaction. Buyer agrees to notify Bright Star Auctions of any changes in account information. Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid. No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number. Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Tools, packing material, and/or assistance will not be supplied at Pickup, so Buyer must plan accordingly. Disassembly and removal shall be done in a quiet and workmanlike manner, and each Buyer, in making its bid, shall thereby indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer’s employees, agents, representatives, or independent contractors in connection with the Pickup. Any and all damages to the Pickup site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller. Each Buyer must show a copy of the invoice (digital or hard copy) and government-issued photo identification before Lots will be released. No Buyer shall bring pets or young children to the Pickup, as the movement of Lots presents an extremely high-risk environment that could result in injury or death. Insurance. Any work performed by Purchaser(s) or Purchaser Representative (including sub-contractors) shall be insured and provide proof of coverage against all claims for injuries against persons or damages to property which may arise from or in connection with the removal of items or equipment. Insurance coverage requirements are as follows: General Liability $1,000,000/$2,000,000 and Worker’s Compensation $1,000,000 or as required by State Law. Seller shall be listed as additionally insured, if required. Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them. In addition, Buyer’s bidding privileges may be suspended at future auctions. Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer. Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession. Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled to specific performance or other equitable relief. Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages. Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property. Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium. Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller. Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site. Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim or suit relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial. Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their rights.

Listing Terms and Conditions

Bidder Terms and Conditions
There is a 13% online buyer’s premium in effect for all purchases made online. Buyer’s premium is 10% for onsite bidders. All items sell where is as is with no warranties or guarantees. Buyer is responsible to inspect all merchandise prior to placing bids. Payment terms: Cash, check, wire transfer. Cash Payments totaling $10,000 or more will not be accepted. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice. Onsite buyers, payment is due the day of the auction. If onsite bidders wish to send a wire and still be assessed only the onsite buyer’s premium, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. All items are pick-up only. Smalls must be removed within 2 days. All items must be removed within 30 days unless otherwise noted. Loadout available day of auction, after that by appointment. Please call agent for more info. Buyer shall assume responsibility of all property when auctioneer says sold. Auction company is not responsible for any missing or stolen items.
These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer.

Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded where required.
Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer:

“Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction.
“Absentee Bidder” means a person or entity that submits an Absentee Bid.
“Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION.
“Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids.
“Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected.
“Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder.
“Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms.
“Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer.
"Buyer" means the Winning Bidder with respect to each Lot of Personal Property.
"Buyer's Premium" is an amount with respect to each Lot of Personal Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account.
“Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation.
“Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer.
“High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot.
“High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on the Lot put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price.
“High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot.
"Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event.
“Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer.
“No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale.
“Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions.
“Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online.
"Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered.
“Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers.
“Personal Property” means all tangible and moveable property, including fixtures, designated as Property.
“Pick-up” means the act of picking up or removing sold Lots by respective Winning Bidders at the date(s), time(s), and location indicated for such during the Auction or as later agreed to by Seller and Buyer.
“Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer).
“Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms-length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction.
“Property” means the Real Property and the Personal Property.
“Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium.
"Registered Bidder" means a person or entity that has registered to bid at the Auction.
“Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction.
“Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE.
“Reserve Price” means the minimum price that Seller is willing to accept for specific Property.
“Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer.
“Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid.
“Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by Seller).
"Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid.
“Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction.

Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.

Governing Law.
1. For Auctions in the State of Indiana and Online. Unless otherwise indicated, all Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are deemed to be entered into in the State of Indiana, all bids and payments are deemed to be received in the State of Indiana, and the contract, if any, will be deemed to be formed and entered into in the State of Indiana.
Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.
Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
Nature of the Auction. This Property is being sold at the Auction in the manner indicated on the first page of this Agreement.
Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
2. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
3. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
4. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
5. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
6. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
7. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
8. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.

1. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties, (i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
2. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
3. No Reduction or Retraction of Online Bids. Online bids may not be reduced or retracted.
4. Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.
5. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.
Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). All prebids and maxbids placed online are considered absentee bids. Auctioneer pledges complete integrity in the treatment of absentee bids and absentee bids may be initiated and advanced in accordance with Auctioneer’s policies and procedures. Auctioneer has the right to initiate any absentee bids at 25% to 50% of their maximum amount. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot of Personal Property will be the Buyer of such Property.
All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.
Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or representation by Auctioneer.
Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ringman, or multiple bid assistants or ringmen, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked-Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases are due upon receipt of your invoice. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. Cash payments totaling Ten Thousand Dollars ($10,000) or more will not be accepted. If onsite bidders wish to send a wire, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.

Wire Transfer Payments. Buyer shall obtain verbal verification of all bank account information from Bright Star Auctions prior to initiating transfer. Except as otherwise provided by law, we shall not be liable for any loss or damage due to misplaced, unauthorized or fraudulent fund transfers.
ACH/eCheck Payments. By providing account information to Bright Star Auctions, buyer gives permission for Bright Star Auctions to retain payment information on file and represents they are the authorized account holder. Upon authorization to collect payment from Buyer’s account and prior to transfer, Buyer is responsible to notify their financial institution of the impending transaction. Buyer agrees to notify Bright Star Auctions of any changes in account information.
Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.
No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Tools, packing material, and/or assistance will not be supplied at Pickup, so Buyer must plan accordingly. Disassembly and removal shall be done in a quiet and workmanlike manner, and each Buyer, in making its bid, shall thereby indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer’s employees, agents, representatives, or independent contractors in connection with the Pickup. Any and all damages to the Pickup site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller. Each Buyer must show a copy of the invoice (digital or hard copy) and government-issued photo identification before Lots will be released. No Buyer shall bring pets or young children to the Pickup, as the movement of Lots presents an extremely high-risk environment that could result in injury or death.
Insurance. Any work performed by Purchaser(s) or Purchaser Representative (including sub-contractors) shall be insured and provide proof of coverage against all claims for injuries against persons or damages to property which may arise from or in connection with the removal of items or equipment. Insurance coverage requirements are as follows: General Liability $1,000,000/$2,000,000 and Worker’s Compensation $1,000,000 or as required by State Law. Seller shall be listed as additionally insured, if required.
Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them. In addition, Buyer’s bidding privileges may be suspended at future auctions.

Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.
Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled to specific performance or other equitable relief.
Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim or suit relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their rights.

Listing Information
After many successful years in the lumber industry, Mr. Smith has made the decision to retire and will be liquidating his complete sawmill operation at auction. 00 Information Lot Type of Auction: Sawmill Liquidation Highlight Pieces: Komatsu & John Deere Wheel Loaders and Quality sawmill equipment. Auction Agent: Eugene Hochstetler 574-242-1100 Aution Manager: Mose Troyer 330-763-3780 Location: 908 Old Hwy 64, English, IN 47118 Titled Vehicles: Once your payment is received and clears our bank, you will be contacted to confirm your information. You can expect Your title within 7 business days after the information is confirmed. If you do not contact us to confirm your information, you will receive the title approx. 30 days after the auction and it will be filled in with the information that you registered with. 01 Preview & Inspection Buyers are responsible to do their own inspection to determine the condition of the items they purchase. Inspections times are available as follows: Week of the auction from 8 to 4 or by appointment. Contact Eugene 574-242-1100 02 Loadout Information 30 days for removal of installed equipment and 3 days for uninstalled items. Free loadout of small, uninstalled items will be provided by Bright Star staff (Mose Troyer 330-763-3780) day of auction and 2 days after the auction from 8AM to 4PM. After this date there will be a loading fee for all lots remaining on site. Buyers will need to contact Paul Avery @ 270-543-1919 for an appointment and loading price. 03 Rigging Information RIGGING IS COMPLETELY THE BUYER’S RESPONSIBILITY. WE HIGHLY RECOMMEND YOU HIRE THE RECOMMENDED RIGGERS. IF YOU DO CHOOSE TO DO YOUR OWN RIGGING OR HIRE ANOTHER RIGGER, YOU MUST PROVIDE US WITH SATISFACTORY PROOF OF LIABILITY INSURANCE COVERAGE OF UP TO 1 MILLION DOLLARS IN COVERAGE. ALL BUYERS ARE COMPLETELY RESPONSIBLE FOR ANY DAMAGE THEY DO TO THEIR OWN EQUIPMENT OR ANYONE ELSE’S PROPERTY OR EQUIPMENT WHILE RIGGING. Recommended Rigger: Paul Avery 270-543-1919 04 Payment Information Payment terms: 10% Onsite and 13% Online Buyer's Premium in effect for all purchases. Cash, check, wire transfer. Cash Payments totaling $10,000 or more will not be accepted. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice. Onsite buyers, payment is due the day of the auction. If onsite bidders wish to send a wire and still be assessed only the onsite buyer’s premium, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. 97 CAT 972M Wheel Loader 1:50 Scale Replica- Die Cast Metal Have fun buying a high-quality, die-cast toy! All proceeds including buyer's premium will go to Feed My Starving Children (FMSC) which is a Christian nonprofit dedicated to seeing every child and person around the world healthy, nourished and whole in body and spirit. Bright Star will pay for standard shipping and handling to the 48 contiguous states for buyers of this lot. https://www.youtube.com/watch?v=jYATxeDmuzM&t=8s 98 Heavy Equipment Key Set 36 Keys Shipping available for $20 99 SDRTOP Manual Sealless Steel Strapping Tool Model A333, works for 1/2" 5/8" or 3/4" banding, new in box. Shipping available for $30 100 Husqvarna 385XP Chain Saw 24" bar 101 Husqvarna 455 Chainsaw 20" bar 102 Husqvarna 455 Rancher Chainsaw 20" bar 103 Husqvarna 455 Chainsaw 20" bar 104 Husqvarna 414EL Chainsaw 16" bar, electric 105 New Jones Grinder Model: 6, SN: 623127J, powered by Wenger drill 106 Archer 2 Computer Tallies 1 unit does log tally, 1 unit does log and lumber tallies, chargers included, these unit were being used 107 Lumber Grading and Marking Sticks 24" grading stick-New, (2) 36" crayon holder 108 Husky Tool Chest 26" x 16" x 12", Micro switches and more, heat gun, Torque 1/2" wrench 109 US General Tool Chest 30" x 36" x 20", 5 drawer, loaded with tools, Milwaukee 4 1/2" grinder, sockets, open end wrenches, lots of supplies 110 1969 Fulghum Rosserhead Debarker Model: E-620, SN: F1-00-482, 14' outside bullwheels, 2" x 22" wheels, 22' head travel, aluminum head, hydraulic log kickers, 15 hp hydraulic pack, operators cab with controls, AC unit 111 Bark Conveyor Heavy Duty shop built, 42" x 20' flat section, 34' elevated section, 2" x 2" x 16" paddles, hydraulic drive 112 3 Strand Log Deck 8'6" x 18', no stop'n'load, electric drive 112A New Aluminum Debarker Head 2 3/16" x 32" shaft, 12" head, new head was bought for Fulghum debarker 115 Helle 3 HB Modular Carriage (1st of an entirety) 36" capacity, 7'4" x 14' overall, 5 axles, fully hydraulic dogs and setworks, no controls, 10 hp electric hydraulic unit on board 116 Helle Track and Frame with Carriage Drive and 60" Husk (Part of an entirety) 36" center to center of track x 45', carriage drive with hydraulic motor, model B 563 chain turner, 60" husk with 60" saw, no power, 2' x 6' live belt, no drive, 10'6" wide at husk 117 Helle Hydraulic Pack and Valves (Part of an entirety) 50 hp electric, Siemans control box, 26" x 20" x 20" tank, oil cooling unit, includes all pipe and hoses going to equipment, 110V control valve bank 118 Jasper Electric Motor (Part of an entirety) 150 hp, 1780 rpm, 445T frame, 12"-10 groove pulley, includes Allen Bradley control box with Siemans soft start 119 Helle Operators Cab with Controls (Part of an entirety) Helle computer for setworks, 4' x 6' x 6' tall, heat and AC units, all controls in cab, steps going to cab 120 Helle Mill Entirety of lots 115 to 119 With 10% raise 121 Slab Dump Belt 34" x 11'8", 24" belt, heavy duty built, Helle 5hp hydraulic pack, electric drive, hydraulic lift cylinder, one side support to ground 122 3 Strand Log Deck with Stop'n'Load 10' x 26', hydraulic drive 123 Spiral Roll Case 35" x 41', 9" x 30" rolls, (4) 3' board slides, board stop, spiral rolls, no drive 124 Spiral 41" x 20', 6 1/2" x 36" rolls, electric drive 125 Meadows 2 saw Edger Model: 36D, SN: 36D-1869-13, 40" x 8' infeed, 6" x 16' tailing belt, 2 moving saws, (2) 16" split saws, no power, 2 laser lights 126 World Wide Electric Motor with Starter 50 hp, 1770 rpm, 326T frame, includes Siemans starter 126A Edger Saw Blades 16" split blades, 7 blades 127 Dust Blower 24", 10" inlet, 8" outlet, pipe attached to blower approximately 30'-8" pipe, 3 hp electric motor with cut out 128 4 Strand Transfer Deck 12'6" x 22', electric drive 129 4 Strand Transfer Deck 10' x 28', roof top chain, solid steel decking, electric drive 130 CMC 4 Strand Green Chain 11'4" x 104", 21" x 9' dead rolls on end, electric drive, no electric wires 131 Pendu Dust Blower 24" blower, 10" inlet, 8" outlet, steel elbow, no pipe, 15 hp electric 132 Steel Dust Pipe 8" x 110' spiraled pipe, (1) 10" x 10', some new, includes box of fittings 133 Dead Rolls 23 1/2" x 46', 2 1/2" x 20" rolls, 8" rolls on ends, to be used with belt, electric drive 134 Ingersoll Rand Air Compressor Model: 2475, SN: NAR10290394, 110V Solenoid moisture release valve, 5 hp electric drive, 80 gallon vertical tank 135 Ingersoll Rand Air Compressor Model: 242-5N, SN: 532973, 80 gallon vertical tank, 5 hp electric 136 Morbark 48" Chip-Pak Model: 48, SN: 933, 3 knife chipper, 5' x 6' shaker screen, 4' cyclone, 75 hp electric motor, electric motor starters 137 Morbark Chip Blower 28" blower, 10 hp electric motor, on swivel stand 138 Carrier Vibrating Conveyor Model: LL24120F, SN: C1554, 40" x 50', electric drive, chipper adapter, 12" sides, 24" pan, recent new fiberglass paddles installed 139 Carrier Vibrating Conveyor Model: LL24120F, SN: C1555, 40" x 50', electric drive, 12" sides, 24" pan, recent new paddles installed 140 Helle 3 HB Carriage (1st of an entirety) 36" capacity, 6' x 13' overall, on board chain turner, fully hydraulic dogs and setworks, no controls, on board hydraulic pack, not much use since rebuilt by Helle 141 Track and Frame with Husk, Carriage Drive, and Feed (Part of an entirety) 36" center to center x 55' track, 60 hp hydraulic pack on feed, support to ground, 36" chain turner, 60" husk, 2' x 6' live belt with hydraulic pack on husk 142 Helle Operators Cab (Part of an entirety) 4' x 5' x 6'4" tall, steps and frame, no controls 143 Siemans 125hp Electric Motor (Part of an entirety) 10" - 10 groove pulley, 444T frame, 1785 rpm, 144 Helle Mill Entirety of Lots 140-143 With 10% raise 145 Helle Vertical Edger 2 saw, 22" split saws, opens 28", 40 hp electric motor, support frame 145A Helle Carriage Parts Control box, new cylinders, new encoder, new bucket of paint, new sticker for thickness scale, valves, control handle, new controls cord 146 Helle Carriage Parts Head blocks and more, owner bought carriage for parts, 2 skids of parts 147 60" Circular Saw F style, good saw 148 60" Circular Saw F style, good saw 149 60" Circular Saw F style, shoulder damage 150 Tub Knife Grinder 3 knife holders, 20" capacity, electric drive 151 New Simonds Chipper Knives (18) 14 3/4" x 9" x 375 152 Chipper Knife Holders and Knives (48) unused knives 14 3/4" long, (3) new knife holders 152A Bevel Buddy Knife Dressing Tool Pipers set gauge 152B Chipper Knife Clamps Used knife clamps and box of new stud bolts 159 Square D Control Center and Electrical Lot 3 section 600 amp control center, lots of motor starters, all wire and conduit going to equipment not otherwise lotted and not pertaining to lighting in building 160 Wood-Mizer HR120 Horizontal Resaw Model: HR12017-1, SN: 05140797, meter reads: 56 hours, Kohler diesel engine, power raise and lower, 12" x 6' feed belt with 12V drive, 19" wheels, 1 1/4" bands 160A Brute Optimizing Chop Saw SN: 0100B8LP60, BMI advanced technology computerized controls! Complete system with infeed and out feed tables. Currently in production. Flash drive with all wiring schematics and operators manual. 161 Helle Belt Conveyor 29" x 76", 24" belt, hydraulic drive 162 Helle Roll Case with Pop-Up Transfer 28 1/2" x 10'6", 5 strand pop-up transfer chain 8' x 34", hydraulic drive, hydraulic pop-up cylinder, 8 1/2" x 24" rolls, no power on rolls 163 Helle Spiral Roll Case 25" x 12', 5 1/2" x 21" rolls, no drive 164 Dead Rolls 21" x 9', 3" x 18" rolls 165 3 Strand Log Deck 10' x 18', Tulsa winch gearbox with hydraulic motor, no stop'n'load 166 Shafts with Sprockets and Bearings 3 shafts with stop'n'loads-(1) 9'6" with bearings, (1) 9'2" no bearings; 3 shafts with sprockets and bearings-(1) 11'4", (2) 9' 167 Helle Barn Sweep 37 1/2" x 25', 7" sides, 26" pan, 3" x 9" paddles, hydraulic drive 168 Helle Barn Sweep 37 1/2" x 25', 7" sides, 26" pan, 3" x 9" paddles, hydraulic drive 169 Helle Mud Saw 8" wheel with insert teeth, electric drive 170 Swing Arm Chop Saw 24" blade, no power 171 4 Strand Unscrambler 2 section cross slats, 10'6" wide 63" tall, no drive 172 Bark Conveyor 4' x 30', 16" paddles, no drive 173 Bark Conveyor 2 sections 23" x 20', 15" paddles, electric drive 174 Fuel Tank 8' x 5' 175 Concave Belt Conveyor 26" x 26', hydraulic drive 176 Deck Chain and Skate Rolls (4) Deck chain, 18" x 10' skate rolls, 12" x 6' cement tile 177 Steel I Beams (1) 9'4" x 6" x 12", (1) 1" x 6" x 8" x 7' angle, (1) 8" x 12" x 8', (1) 3" x 4" x 10' angle, (1) 3" x 10" x 10' C-channel 178 Steel Scrap Pile Steel scrap pile behind mill building 200 2018 Komatsu WA200-8 Wheel Loader SN: 85539. Meter reads: 3,461 hours. Engine: Komatsu SAA4D107E-3. Fuel type: Diesel. ROPS: Yes, enclosed. 3rd Valve: Yes. Center to center of pins: 31" W, 17" T. Tire Size: 20.5R25. Attachments: No. Heater: Yes. A/C: Yes. Quick Attach: Yes. Features and Notes: Runs and operates, side window has crack 203 Rockland Grapple Forks Log forks with clamp, quick attach for Komat'su loader 204 GEM Bucket 4 yard bucket, quick attach for Komat'su loader 205 2013 John Deere 344J Wheel Loader SN: 1LV344JXCZB030560. Meter reads: 7,397 hours. Engine: JD 4045HT281. Fuel type: Diesel. ROPS: Yes, enclosed. 3rd Valve: Yes. Center to center of pins: 38" W 24" T. Tire Size: 17.5R25. Attachments: No. Heater: Yes. A/C: Yes. Quick Attach: Yes. Features and Notes: Runs and operates. This item will be reserved for loadout until May 3rd. 206 Rockland Forks Model: LFW 344J, for John Deere 344J loader quick attach 235 207 Lieb Herr Bucket Dirt bucket, fits John Deere 344, quick attach 236 208 1989 John Deere 344E Wheel Loader SN: CK344EB000152. Meter reads: Unknown. Engine: John Deere 4276DT009. Fuel type: Diesel. ROPS: Enclosed. 3rd Valve: No. Tire Size: 15.5-25. Attachments: Lumber forks. Quick Attach: No. Features and Notes: Low hours on rebuilt engine, hydraulic pump needs repair 215 Loader Tire 17.5R25, useable tire 240 Rims with Solid Rubber (4) 22 1/2" x 11" rims, 8 hole lug pattern 241 Rims with Solid Rubber (4) 20 1/2" x 10 1/2" rims, 8 hole lug pattern 242 Axle and Wheels 7'10" axle with 6 lug pattern, 2 wheels tire size 9.00R20, 6 lug pattern 250 1977 Chevrolet C65 Log Truck VIN: CCE677B113497. Meter reads: 20,321 miles. Engine: Gas. Transmission: 5 speed manual. Log loader: No. Suspension: Spring. Features and Notes: Runs and operates, 8' x 16' flatbed with log bunks. Has title. 250A Side Boards for Flatbed Truck Used on lot 250 256 1974 Fruehauf Chip Trailer VIN: MA5470883, model: FBZ9-F2-40, 8' x 40'. Has title. 257 Dorsey Chip Trailer Steel contents, 8' x 48'. No title, bill of sale only 260 Cabinet and Contents New roller chain, belt lacing tool and supplies, filters, 6" belting 261 Spools with Cable 5/8" cable, 1 spool with new length unknown, 2 spools used-length unknown 262 Wheelbarrow and Shovels 263 Chains (1) 14' with 2 hooks, (1) 5' with 2 hooks 264 30" Pedestal Fan Electric 265 Tool Lot 2 shovels, 2 brooms, 1 bar 266 Tools and Belts Grease gun, v-belts, raincoats, 2 shovels, 1 broom, air hose, comalong 267 Cable, V-Belts, and Wire Used cable, heavy electric wire 268 Jones Saw Grinder Model: 6P, powered by Makita drill, extra wheels, saw wrench, swages 269 O-Ring and Clamps Assorted O-rings and parts, c-clamps 270 Hand Tools Pipe wrenches, crescent wrenches, pliers 271 Tool Lot Pipe threader, 1" breaker bar with extension and socket, 3/4" rachet 272 Tool Lot and Pellet Gun Assorted tools, 5" vise 273 Tool Lot 2 brooms, 1 shovel, 1 cant hook 274 Tool Lot 2 axe, sledge, tin snips, plus more 275 Fire Extinguishers 6 pieces, have been serviced in March 24 276 Oil and Misc. Lot 10' chain, 1 hook, bar and chain oil, air hose 277 Banding Cart With steel banding and tools 278 Banding Cart With tools 279 Steel Banding 5/8", 6 rolls new steel banding 280 Maxx-Jack Pallet Jack Model: MJ-55-W 281 Ridgid 10 Gallon Shop Vac 6.5 hp electric, box fan, step stool 282 Poly Wheelbarrow 2 wheeled 283 Pipe Lot 6" x 45", 3" x 45", used to roll out lumber packs 284 Desk and Box with Tools and Parts Hand tools, welding helmet, chainsaw parts, knee hole desk and wooden parts box, all item on top 285 Ingersoll Rand Air Compressor Model: 2475, SN: 9017343, cutout box, air hose, 80 gallon vertical tank, electric drive, working condition 286 Air Compressor Does not work, 15 hp electric motor that works, 80 gallon horizontal tank 287 Milwaukee Chop Saw and Bench Grinder Milwaukee 14" abrasive chop saw, tool shed 6" bench grinder 288 Cutting Torch Set on Cart Tanks do not sell, Saftcart, torch and gauges 289 Bessy Bench Vice and Rigid Grinder 6" bench vice, Rigid 6" electric grinder 290 Conveyor Belting 24" x length unknown-new belt; 16" x length unknown-used belt 291 New GE Electric Motor 5 hp, 1765 rpm, 34T Frame, new motor 292 Milwaukee Cordless 18V Impact 1/2" square ting impact wrench, 3 batteries, working condition 293 DeWalt 1/2" Cordless Drill 20V max brushless drill, 3 batteries, 1 charger, working condition 294 Pump and Parts Skid of parts, hand crank oil pump, assorted pulleys, misc. parts 295 Electric Motors and Parts Parts and scrap metal in shop that has not been previously lotted, lots of electric motors and wires, deck chains, pulleys, sprockets, engine block, plus more. Wood stove does not sell 296 Belts and Hoses New and used belts, hard hat, cutting wheels 297 Parts and Tools New rulers, cutting wheels, tree paint, lot of parts 298 Sprockets and Pulleys Lots of new sprockets, seal kits, debarker cylinders, new bearings, Morbark shaker rod 299 Central Pneumatic Air Compressor 2 hp, 4 gallon tank, electric 300 Shelf of Parts Lots of bolts, buckets of bolts 301 Buckets of Bolts All bolts and parts on shelf 312 302 Electrical Boxes and Old School Desk 303 Simond Chipper Knives 18 new knives, 14 3/4" x 4" x .375 304 Simonds Teeth and Shanks New and used F shanks, 2 box new teeth 305 Menpminee Hard Chrome Teeth 5 box new teeth 306 Ingersoll Rand Air Dryer and Dust Blower Refrigerant air dryer (came with compressor but owner didn't use), 12" blower, 6" inlet, 4" outlet, 2 hp electric motor 307 Brother Coyer, Heater, Fan, and School Desk Frame 24" box fan, electric heater, Brother printer-copier, 2 school desk frames 308 Craftsman Motorcycle/ATV Stand Motorcycle lift stand on casters, 1500 lbs capacity 309 Motor Starters 2 starters, condition or brand unknown 310 Chicago Electric Chainsaw Grinder Bench mount saw chain grinder, 2 amber strobe light, 12V, ear plugs 311 Oil and Fuel Filters New filters for Komatsu loaders 313 Hydraulic Quick Coupler Fittings and Box of Supplies Quick couplers for Komatsu loader, box of shop supplies 314 Hitachi Seal Kits Seal supplies for Hitachi loaders 315 Laser Lights 2 laser lights, have been factory rebuilt 316 Filters and Seal Kit Filters for Komatsu loader, seal kit for debarker

Listing Information

After many successful years in the lumber industry, Mr. Smith has made the decision to retire and will be liquidating his complete sawmill operation at auction.

Information Lot
Type of Auction: Sawmill Liquidation
Highlight Pieces: Komatsu & John Deere Wheel Loaders and Quality sawmill equipment.
Auction Agent: Eugene Hochstetler 574-242-1100
Aution Manager: Mose Troyer 330-763-3780
Location: 908 Old Hwy 64, English, IN 47118

Titled Vehicles: Once your payment is received and clears our bank, you will be contacted to confirm your information. You can expect Your title within 7 business days after the information is confirmed. If you do not contact us to confirm your information, you will receive the title approx. 30 days after the auction and it will be filled in with the information that you registered with.

Preview & Inspection
Buyers are responsible to do their own inspection to determine the condition of the items they purchase. Inspections times are available as follows: Week of the auction from 8 to 4 or by appointment. Contact Eugene 574-242-1100

Loadout Information
30 days for removal of installed equipment and 3 days for uninstalled items. Free loadout of small, uninstalled items will be provided by Bright Star staff (Mose Troyer 330-763-3780) day of auction and 2 days after the auction from 8AM to 4PM. After this date there will be a loading fee for all lots remaining on site. Buyers will need to contact Paul Avery @ 270-543-1919 for an appointment and loading price.

Rigging Information
RIGGING IS COMPLETELY THE BUYER’S RESPONSIBILITY. WE HIGHLY RECOMMEND YOU HIRE THE RECOMMENDED RIGGERS. IF YOU DO CHOOSE TO DO YOUR OWN RIGGING OR HIRE ANOTHER RIGGER, YOU MUST PROVIDE US WITH SATISFACTORY PROOF OF LIABILITY INSURANCE COVERAGE OF UP TO 1 MILLION DOLLARS IN COVERAGE. ALL BUYERS ARE COMPLETELY RESPONSIBLE FOR ANY DAMAGE THEY DO TO THEIR OWN EQUIPMENT OR ANYONE ELSE’S PROPERTY OR EQUIPMENT WHILE RIGGING.

Recommended Rigger: Paul Avery 270-543-1919

Payment Information
Payment terms: 10% Onsite and 13% Online Buyer's Premium in effect for all purchases. Cash, check, wire transfer. Cash Payments totaling $10,000 or more will not be accepted. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice. Onsite buyers, payment is due the day of the auction. If onsite bidders wish to send a wire and still be assessed only the onsite buyer’s premium, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction.

CAT 972M Wheel Loader 1:50 Scale Replica- Die Cast Metal
Have fun buying a high-quality, die-cast toy! All proceeds including buyer's premium will go to Feed My Starving Children (FMSC) which is a Christian nonprofit dedicated to seeing every child and person around the world healthy, nourished and whole in body and spirit. Bright Star will pay for standard shipping and handling to the 48 contiguous states for buyers of this lot.
https://www.youtube.com/watch?v=jYATxeDmuzM&t=8s

Heavy Equipment Key Set 36 Keys
Shipping available for $20

SDRTOP Manual Sealless Steel Strapping Tool
Model A333, works for 1/2" 5/8" or 3/4" banding, new in box. Shipping available for $30

100

Husqvarna 385XP Chain Saw
24" bar

101

Husqvarna 455 Chainsaw
20" bar

102

Husqvarna 455 Rancher Chainsaw
20" bar

103

Husqvarna 455 Chainsaw
20" bar

104

Husqvarna 414EL Chainsaw
16" bar, electric

105

New Jones Grinder
Model: 6, SN: 623127J, powered by Wenger drill

106

Archer 2 Computer Tallies
1 unit does log tally, 1 unit does log and lumber tallies, chargers included, these unit were being used

107

Lumber Grading and Marking Sticks
24" grading stick-New, (2) 36" crayon holder

108

Husky Tool Chest
26" x 16" x 12", Micro switches and more, heat gun, Torque 1/2" wrench

109

US General Tool Chest
30" x 36" x 20", 5 drawer, loaded with tools, Milwaukee 4 1/2" grinder, sockets, open end wrenches, lots of supplies

110

1969 Fulghum Rosserhead Debarker
Model: E-620, SN: F1-00-482, 14' outside bullwheels, 2" x 22" wheels, 22' head travel, aluminum head, hydraulic log kickers, 15 hp hydraulic pack, operators cab with controls, AC unit

111

Bark Conveyor
Heavy Duty shop built, 42" x 20' flat section, 34' elevated section, 2" x 2" x 16" paddles, hydraulic drive

112

3 Strand Log Deck
8'6" x 18', no stop'n'load, electric drive

112A

New Aluminum Debarker Head
2 3/16" x 32" shaft, 12" head, new head was bought for Fulghum debarker

115

Helle 3 HB Modular Carriage
(1st of an entirety) 36" capacity, 7'4" x 14' overall, 5 axles, fully hydraulic dogs and setworks, no controls, 10 hp electric hydraulic unit on board

116

Helle Track and Frame with Carriage Drive and 60" Husk
(Part of an entirety) 36" center to center of track x 45', carriage drive with hydraulic motor, model B 563 chain turner, 60" husk with 60" saw, no power, 2' x 6' live belt, no drive, 10'6" wide at husk

117

Helle Hydraulic Pack and Valves
(Part of an entirety) 50 hp electric, Siemans control box, 26" x 20" x 20" tank, oil cooling unit, includes all pipe and hoses going to equipment, 110V control valve bank

118

Jasper Electric Motor
(Part of an entirety) 150 hp, 1780 rpm, 445T frame, 12"-10 groove pulley, includes Allen Bradley control box with Siemans soft start

119

Helle Operators Cab with Controls
(Part of an entirety) Helle computer for setworks, 4' x 6' x 6' tall, heat and AC units, all controls in cab, steps going to cab

120

Helle Mill Entirety of lots 115 to 119
With 10% raise

121

Slab Dump Belt
34" x 11'8", 24" belt, heavy duty built, Helle 5hp hydraulic pack, electric drive, hydraulic lift cylinder, one side support to ground

122

3 Strand Log Deck with Stop'n'Load
10' x 26', hydraulic drive

123

Spiral Roll Case
35" x 41', 9" x 30" rolls, (4) 3' board slides, board stop, spiral rolls, no drive

124

Spiral
41" x 20', 6 1/2" x 36" rolls, electric drive

125

Meadows 2 saw Edger
Model: 36D, SN: 36D-1869-13, 40" x 8' infeed, 6" x 16' tailing belt, 2 moving saws, (2) 16" split saws, no power, 2 laser lights

126

World Wide Electric Motor with Starter
50 hp, 1770 rpm, 326T frame, includes Siemans starter

126A

Edger Saw Blades
16" split blades, 7 blades

127

Dust Blower
24", 10" inlet, 8" outlet, pipe attached to blower approximately 30'-8" pipe, 3 hp electric motor with cut out

128

4 Strand Transfer Deck
12'6" x 22', electric drive

129

4 Strand Transfer Deck
10' x 28', roof top chain, solid steel decking, electric drive

130

CMC 4 Strand Green Chain
11'4" x 104", 21" x 9' dead rolls on end, electric drive, no electric wires

131

Pendu Dust Blower
24" blower, 10" inlet, 8" outlet, steel elbow, no pipe, 15 hp electric

132

Steel Dust Pipe
8" x 110' spiraled pipe, (1) 10" x 10', some new, includes box of fittings

133

Dead Rolls
23 1/2" x 46', 2 1/2" x 20" rolls, 8" rolls on ends, to be used with belt, electric drive

134

Ingersoll Rand Air Compressor
Model: 2475, SN: NAR10290394, 110V Solenoid moisture release valve, 5 hp electric drive, 80 gallon vertical tank

135

Ingersoll Rand Air Compressor
Model: 242-5N, SN: 532973, 80 gallon vertical tank, 5 hp electric

136

Morbark 48" Chip-Pak
Model: 48, SN: 933, 3 knife chipper, 5' x 6' shaker screen, 4' cyclone, 75 hp electric motor, electric motor starters

137

Morbark Chip Blower
28" blower, 10 hp electric motor, on swivel stand

138

Carrier Vibrating Conveyor
Model: LL24120F, SN: C1554, 40" x 50', electric drive, chipper adapter, 12" sides, 24" pan, recent new fiberglass paddles installed

139

Carrier Vibrating Conveyor
Model: LL24120F, SN: C1555, 40" x 50', electric drive, 12" sides, 24" pan, recent new paddles installed

140

Helle 3 HB Carriage
(1st of an entirety) 36" capacity, 6' x 13' overall, on board chain turner, fully hydraulic dogs and setworks, no controls, on board hydraulic pack, not much use since rebuilt by Helle

141

Track and Frame with Husk, Carriage Drive, and Feed
(Part of an entirety) 36" center to center x 55' track, 60 hp hydraulic pack on feed, support to ground, 36" chain turner, 60" husk, 2' x 6' live belt with hydraulic pack on husk

142

Helle Operators Cab
(Part of an entirety) 4' x 5' x 6'4" tall, steps and frame, no controls

143

Siemans 125hp Electric Motor
(Part of an entirety) 10" - 10 groove pulley, 444T frame, 1785 rpm,

144

Helle Mill Entirety of Lots 140-143
With 10% raise

145

Helle Vertical Edger
2 saw, 22" split saws, opens 28", 40 hp electric motor, support frame

145A

Helle Carriage Parts
Control box, new cylinders, new encoder, new bucket of paint, new sticker for thickness scale, valves, control handle, new controls cord

146

Helle Carriage Parts
Head blocks and more, owner bought carriage for parts, 2 skids of parts

147

60" Circular Saw
F style, good saw

148

60" Circular Saw
F style, good saw

149

60" Circular Saw
F style, shoulder damage

150

Tub Knife Grinder
3 knife holders, 20" capacity, electric drive

151

New Simonds Chipper Knives
(18) 14 3/4" x 9" x 375

152

Chipper Knife Holders and Knives
(48) unused knives 14 3/4" long, (3) new knife holders

152A

Bevel Buddy Knife Dressing Tool
Pipers set gauge

152B

Chipper Knife Clamps
Used knife clamps and box of new stud bolts

159

Square D Control Center and Electrical Lot
3 section 600 amp control center, lots of motor starters, all wire and conduit going to equipment not otherwise lotted and not pertaining to lighting in building

160

Wood-Mizer HR120 Horizontal Resaw
Model: HR12017-1, SN: 05140797, meter reads: 56 hours, Kohler diesel engine, power raise and lower, 12" x 6' feed belt with 12V drive, 19" wheels, 1 1/4" bands

160A

Brute Optimizing Chop Saw
SN: 0100B8LP60, BMI advanced technology computerized controls! Complete system with infeed and out feed tables. Currently in production. Flash drive with all wiring schematics and operators manual.

161

Helle Belt Conveyor
29" x 76", 24" belt, hydraulic drive

162

Helle Roll Case with Pop-Up Transfer
28 1/2" x 10'6", 5 strand pop-up transfer chain 8' x 34", hydraulic drive, hydraulic pop-up cylinder, 8 1/2" x 24" rolls, no power on rolls

163

Helle Spiral Roll Case
25" x 12', 5 1/2" x 21" rolls, no drive

164

Dead Rolls
21" x 9', 3" x 18" rolls

165

3 Strand Log Deck
10' x 18', Tulsa winch gearbox with hydraulic motor, no stop'n'load

166

Shafts with Sprockets and Bearings
3 shafts with stop'n'loads-(1) 9'6" with bearings, (1) 9'2" no bearings; 3 shafts with sprockets and bearings-(1) 11'4", (2) 9'

167

Helle Barn Sweep
37 1/2" x 25', 7" sides, 26" pan, 3" x 9" paddles, hydraulic drive

168

Helle Barn Sweep
37 1/2" x 25', 7" sides, 26" pan, 3" x 9" paddles, hydraulic drive

169

Helle Mud Saw
8" wheel with insert teeth, electric drive

170

Swing Arm Chop Saw
24" blade, no power

171

4 Strand Unscrambler
2 section cross slats, 10'6" wide 63" tall, no drive

172

Bark Conveyor
4' x 30', 16" paddles, no drive

173

Bark Conveyor
2 sections 23" x 20', 15" paddles, electric drive

174

Fuel Tank
8' x 5'

175

Concave Belt Conveyor
26" x 26', hydraulic drive

176

Deck Chain and Skate Rolls
(4) Deck chain, 18" x 10' skate rolls, 12" x 6' cement tile

177

Steel I Beams
(1) 9'4" x 6" x 12", (1) 1" x 6" x 8" x 7' angle, (1) 8" x 12" x 8', (1) 3" x 4" x 10' angle, (1) 3" x 10" x 10' C-channel

178

Steel Scrap Pile
Steel scrap pile behind mill building

200

2018 Komatsu WA200-8 Wheel Loader
SN: 85539.
Meter reads: 3,461 hours.
Engine: Komatsu SAA4D107E-3.
Fuel type: Diesel.
ROPS: Yes, enclosed.
3rd Valve: Yes.
Center to center of pins: 31" W, 17" T.
Tire Size: 20.5R25.
Attachments: No.
Heater: Yes.
A/C: Yes.
Quick Attach: Yes.

Features and Notes: Runs and operates, side window has crack

203

Rockland Grapple Forks
Log forks with clamp, quick attach for Komat'su loader

204

GEM Bucket
4 yard bucket, quick attach for Komat'su loader

205

2013 John Deere 344J Wheel Loader
SN: 1LV344JXCZB030560.
Meter reads: 7,397 hours.
Engine: JD 4045HT281.
Fuel type: Diesel.
ROPS: Yes, enclosed.
3rd Valve: Yes.
Center to center of pins: 38" W 24" T.
Tire Size: 17.5R25.
Attachments: No.
Heater: Yes.
A/C: Yes.
Quick Attach: Yes.

Features and Notes: Runs and operates. This item will be reserved for loadout until May 3rd.

206

Rockland Forks
Model: LFW 344J, for John Deere 344J loader quick attach

235

207

Lieb Herr Bucket
Dirt bucket, fits John Deere 344, quick attach

236

208

1989 John Deere 344E Wheel Loader
SN: CK344EB000152.
Meter reads: Unknown.
Engine: John Deere 4276DT009.
Fuel type: Diesel.
ROPS: Enclosed.
3rd Valve: No.
Tire Size: 15.5-25.
Attachments: Lumber forks.
Quick Attach: No.

Features and Notes: Low hours on rebuilt engine, hydraulic pump needs repair

215

Loader Tire
17.5R25, useable tire

240

Rims with Solid Rubber
(4) 22 1/2" x 11" rims, 8 hole lug pattern

241

Rims with Solid Rubber
(4) 20 1/2" x 10 1/2" rims, 8 hole lug pattern

242

Axle and Wheels
7'10" axle with 6 lug pattern, 2 wheels tire size 9.00R20, 6 lug pattern

250

1977 Chevrolet C65 Log Truck
VIN: CCE677B113497.
Meter reads: 20,321 miles.
Engine: Gas.
Transmission: 5 speed manual.
Log loader: No.
Suspension: Spring.

Features and Notes: Runs and operates, 8' x 16' flatbed with log bunks. Has title.

250A

Side Boards for Flatbed Truck
Used on lot 250

256

1974 Fruehauf Chip Trailer
VIN: MA5470883, model: FBZ9-F2-40, 8' x 40'. Has title.

257

Dorsey Chip Trailer
Steel contents, 8' x 48'. No title, bill of sale only

260

Cabinet and Contents
New roller chain, belt lacing tool and supplies, filters, 6" belting

261

Spools with Cable
5/8" cable, 1 spool with new length unknown, 2 spools used-length unknown

262

Wheelbarrow and Shovels

263

Chains
(1) 14' with 2 hooks, (1) 5' with 2 hooks

264

30" Pedestal Fan
Electric

265

Tool Lot
2 shovels, 2 brooms, 1 bar

266

Tools and Belts
Grease gun, v-belts, raincoats, 2 shovels, 1 broom, air hose, comalong

267

Cable, V-Belts, and Wire
Used cable, heavy electric wire

268

Jones Saw Grinder
Model: 6P, powered by Makita drill, extra wheels, saw wrench, swages

269

O-Ring and Clamps
Assorted O-rings and parts, c-clamps

270

Hand Tools
Pipe wrenches, crescent wrenches, pliers

271

Tool Lot
Pipe threader, 1" breaker bar with extension and socket, 3/4" rachet

272

Tool Lot and Pellet Gun
Assorted tools, 5" vise

273

Tool Lot
2 brooms, 1 shovel, 1 cant hook

274

Tool Lot
2 axe, sledge, tin snips, plus more

275

Fire Extinguishers
6 pieces, have been serviced in March 24

276

Oil and Misc. Lot
10' chain, 1 hook, bar and chain oil, air hose

277

Banding Cart
With steel banding and tools

278

Banding Cart
With tools

279

Steel Banding
5/8", 6 rolls new steel banding

280

Maxx-Jack Pallet Jack
Model: MJ-55-W

281

Ridgid 10 Gallon Shop Vac
6.5 hp electric, box fan, step stool

282

Poly Wheelbarrow
2 wheeled

283

Pipe Lot
6" x 45", 3" x 45", used to roll out lumber packs

284

Desk and Box with Tools and Parts
Hand tools, welding helmet, chainsaw parts, knee hole desk and wooden parts box, all item on top

285

Ingersoll Rand Air Compressor
Model: 2475, SN: 9017343, cutout box, air hose, 80 gallon vertical tank, electric drive, working condition

286

Air Compressor
Does not work, 15 hp electric motor that works, 80 gallon horizontal tank

287

Milwaukee Chop Saw and Bench Grinder
Milwaukee 14" abrasive chop saw, tool shed 6" bench grinder

288

Cutting Torch Set on Cart
Tanks do not sell, Saftcart, torch and gauges

289

Bessy Bench Vice and Rigid Grinder
6" bench vice, Rigid 6" electric grinder

290

Conveyor Belting
24" x length unknown-new belt; 16" x length unknown-used belt

291

New GE Electric Motor
5 hp, 1765 rpm, 34T Frame, new motor

292

Milwaukee Cordless 18V Impact
1/2" square ting impact wrench, 3 batteries, working condition

293

DeWalt 1/2" Cordless Drill
20V max brushless drill, 3 batteries, 1 charger, working condition

294

Pump and Parts
Skid of parts, hand crank oil pump, assorted pulleys, misc. parts

295

Electric Motors and Parts
Parts and scrap metal in shop that has not been previously lotted, lots of electric motors and wires, deck chains, pulleys, sprockets, engine block, plus more. Wood stove does not sell

296

Belts and Hoses
New and used belts, hard hat, cutting wheels

297

Parts and Tools
New rulers, cutting wheels, tree paint, lot of parts

298

Sprockets and Pulleys
Lots of new sprockets, seal kits, debarker cylinders, new bearings, Morbark shaker rod

299

Central Pneumatic Air Compressor
2 hp, 4 gallon tank, electric

300

Shelf of Parts
Lots of bolts, buckets of bolts

301

Buckets of Bolts
All bolts and parts on shelf

312

302

Electrical Boxes and Old School Desk

303

Simond Chipper Knives
18 new knives, 14 3/4" x 4" x .375

304

Simonds Teeth and Shanks
New and used F shanks, 2 box new teeth

305

Menpminee Hard Chrome Teeth
5 box new teeth

306

Ingersoll Rand Air Dryer and Dust Blower
Refrigerant air dryer (came with compressor but owner didn't use), 12" blower, 6" inlet, 4" outlet, 2 hp electric motor

307

Brother Coyer, Heater, Fan, and School Desk Frame
24" box fan, electric heater, Brother printer-copier, 2 school desk frames

308

Craftsman Motorcycle/ATV Stand
Motorcycle lift stand on casters, 1500 lbs capacity

309

Motor Starters
2 starters, condition or brand unknown

310

Chicago Electric Chainsaw Grinder
Bench mount saw chain grinder, 2 amber strobe light, 12V, ear plugs

311

Oil and Fuel Filters
New filters for Komatsu loaders

313

Hydraulic Quick Coupler Fittings and Box of Supplies
Quick couplers for Komatsu loader, box of shop supplies

314

Hitachi Seal Kits
Seal supplies for Hitachi loaders

315

Laser Lights
2 laser lights, have been factory rebuilt

316

Filters and Seal Kit
Filters for Komatsu loader, seal kit for debarker

Photo Gallery

Share This Listing

Other Sales by
This Company

May 7
Houghton, NY

May 7
Scott, PA

May 7
Crab Orchard, KY

May 7
Various, IN

May 7
Woodhull, NY

View all listings

Landmark Wood Products - Sawmill Equipment - English, IN

Bright Star Realty and Auctions, INC

Contact: Loren Beachy
Phone: 574-825-0704

908 Old Hwy 64
English, IN 47118

Wednesday Apr 24, 2024 Completed

Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded where required.
Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer:

Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.

Governing Law.
1. For Auctions in the State of Indiana and Online. Unless otherwise indicated, all Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are deemed to be entered into in the State of Indiana, all bids and payments are deemed to be received in the State of Indiana, and the contract, if any, will be deemed to be formed and entered into in the State of Indiana.
Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.
Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
Nature of the Auction. This Property is being sold at the Auction in the manner indicated on the first page of this Agreement.
Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
2. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
3. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
4. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
5. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
6. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
7. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
8. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.

1. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties, (i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
2. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
3. No Reduction or Retraction of Online Bids. Online bids may not be reduced or retracted.
4. Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.
5. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.
Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). All prebids and maxbids placed online are considered absentee bids. Auctioneer pledges complete integrity in the treatment of absentee bids and absentee bids may be initiated and advanced in accordance with Auctioneer’s policies and procedures. Auctioneer has the right to initiate any absentee bids at 25% to 50% of their maximum amount. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot of Personal Property will be the Buyer of such Property.
All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.
Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or representation by Auctioneer.
Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ringman, or multiple bid assistants or ringmen, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked-Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases are due upon receipt of your invoice. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. Cash payments totaling Ten Thousand Dollars ($10,000) or more will not be accepted. If onsite bidders wish to send a wire, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.

Wire Transfer Payments. Buyer shall obtain verbal verification of all bank account information from Bright Star Auctions prior to initiating transfer. Except as otherwise provided by law, we shall not be liable for any loss or damage due to misplaced, unauthorized or fraudulent fund transfers.
ACH/eCheck Payments. By providing account information to Bright Star Auctions, buyer gives permission for Bright Star Auctions to retain payment information on file and represents they are the authorized account holder. Upon authorization to collect payment from Buyer’s account and prior to transfer, Buyer is responsible to notify their financial institution of the impending transaction. Buyer agrees to notify Bright Star Auctions of any changes in account information.
Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.
No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Tools, packing material, and/or assistance will not be supplied at Pickup, so Buyer must plan accordingly. Disassembly and removal shall be done in a quiet and workmanlike manner, and each Buyer, in making its bid, shall thereby indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer’s employees, agents, representatives, or independent contractors in connection with the Pickup. Any and all damages to the Pickup site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller. Each Buyer must show a copy of the invoice (digital or hard copy) and government-issued photo identification before Lots will be released. No Buyer shall bring pets or young children to the Pickup, as the movement of Lots presents an extremely high-risk environment that could result in injury or death.
Insurance. Any work performed by Purchaser(s) or Purchaser Representative (including sub-contractors) shall be insured and provide proof of coverage against all claims for injuries against persons or damages to property which may arise from or in connection with the removal of items or equipment. Insurance coverage requirements are as follows: General Liability $1,000,000/$2,000,000 and Worker’s Compensation $1,000,000 or as required by State Law. Seller shall be listed as additionally insured, if required.
Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them. In addition, Buyer’s bidding privileges may be suspended at future auctions.

Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.
Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled to specific performance or other equitable relief.
Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim or suit relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their rights.

Listing Details
After many successful years in the lumber industry, Mr. Smith has made the decision to retire and will be liquidating his complete sawmill operation at auction. 00 Information Lot Type of Auction: Sawmill Liquidation Highlight Pieces: Komatsu & John Deere Wheel Loaders and Quality sawmill equipment. Auction Agent: Eugene Hochstetler 574-242-1100 Aution Manager: Mose Troyer 330-763-3780 Location: 908 Old Hwy 64, English, IN 47118 Titled Vehicles: Once your payment is received and clears our bank, you will be contacted to confirm your information. You can expect Your title within 7 business days after the information is confirmed. If you do not contact us to confirm your information, you will receive the title approx. 30 days after the auction and it will be filled in with the information that you registered with. 01 Preview & Inspection Buyers are responsible to do their own inspection to determine the condition of the items they purchase. Inspections times are available as follows: Week of the auction from 8 to 4 or by appointment. Contact Eugene 574-242-1100 02 Loadout Information 30 days for removal of installed equipment and 3 days for uninstalled items. Free loadout of small, uninstalled items will be provided by Bright Star staff (Mose Troyer 330-763-3780) day of auction and 2 days after the auction from 8AM to 4PM. After this date there will be a loading fee for all lots remaining on site. Buyers will need to contact Paul Avery @ 270-543-1919 for an appointment and loading price. 03 Rigging Information RIGGING IS COMPLETELY THE BUYER’S RESPONSIBILITY. WE HIGHLY RECOMMEND YOU HIRE THE RECOMMENDED RIGGERS. IF YOU DO CHOOSE TO DO YOUR OWN RIGGING OR HIRE ANOTHER RIGGER, YOU MUST PROVIDE US WITH SATISFACTORY PROOF OF LIABILITY INSURANCE COVERAGE OF UP TO 1 MILLION DOLLARS IN COVERAGE. ALL BUYERS ARE COMPLETELY RESPONSIBLE FOR ANY DAMAGE THEY DO TO THEIR OWN EQUIPMENT OR ANYONE ELSE’S PROPERTY OR EQUIPMENT WHILE RIGGING. Recommended Rigger: Paul Avery 270-543-1919 04 Payment Information Payment terms: 10% Onsite and 13% Online Buyer's Premium in effect for all purchases. Cash, check, wire transfer. Cash Payments totaling $10,000 or more will not be accepted. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice. Onsite buyers, payment is due the day of the auction. If onsite bidders wish to send a wire and still be assessed only the onsite buyer’s premium, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. 97 CAT 972M Wheel Loader 1:50 Scale Replica- Die Cast Metal Have fun buying a high-quality, die-cast toy! All proceeds including buyer's premium will go to Feed My Starving Children (FMSC) which is a Christian nonprofit dedicated to seeing every child and person around the world healthy, nourished and whole in body and spirit. Bright Star will pay for standard shipping and handling to the 48 contiguous states for buyers of this lot. https://www.youtube.com/watch?v=jYATxeDmuzM&t=8s 98 Heavy Equipment Key Set 36 Keys Shipping available for $20 99 SDRTOP Manual Sealless Steel Strapping Tool Model A333, works for 1/2" 5/8" or 3/4" banding, new in box. Shipping available for $30 100 Husqvarna 385XP Chain Saw 24" bar 101 Husqvarna 455 Chainsaw 20" bar 102 Husqvarna 455 Rancher Chainsaw 20" bar 103 Husqvarna 455 Chainsaw 20" bar 104 Husqvarna 414EL Chainsaw 16" bar, electric 105 New Jones Grinder Model: 6, SN: 623127J, powered by Wenger drill 106 Archer 2 Computer Tallies 1 unit does log tally, 1 unit does log and lumber tallies, chargers included, these unit were being used 107 Lumber Grading and Marking Sticks 24" grading stick-New, (2) 36" crayon holder 108 Husky Tool Chest 26" x 16" x 12", Micro switches and more, heat gun, Torque 1/2" wrench 109 US General Tool Chest 30" x 36" x 20", 5 drawer, loaded with tools, Milwaukee 4 1/2" grinder, sockets, open end wrenches, lots of supplies 110 1969 Fulghum Rosserhead Debarker Model: E-620, SN: F1-00-482, 14' outside bullwheels, 2" x 22" wheels, 22' head travel, aluminum head, hydraulic log kickers, 15 hp hydraulic pack, operators cab with controls, AC unit 111 Bark Conveyor Heavy Duty shop built, 42" x 20' flat section, 34' elevated section, 2" x 2" x 16" paddles, hydraulic drive 112 3 Strand Log Deck 8'6" x 18', no stop'n'load, electric drive 112A New Aluminum Debarker Head 2 3/16" x 32" shaft, 12" head, new head was bought for Fulghum debarker 115 Helle 3 HB Modular Carriage (1st of an entirety) 36" capacity, 7'4" x 14' overall, 5 axles, fully hydraulic dogs and setworks, no controls, 10 hp electric hydraulic unit on board 116 Helle Track and Frame with Carriage Drive and 60" Husk (Part of an entirety) 36" center to center of track x 45', carriage drive with hydraulic motor, model B 563 chain turner, 60" husk with 60" saw, no power, 2' x 6' live belt, no drive, 10'6" wide at husk 117 Helle Hydraulic Pack and Valves (Part of an entirety) 50 hp electric, Siemans control box, 26" x 20" x 20" tank, oil cooling unit, includes all pipe and hoses going to equipment, 110V control valve bank 118 Jasper Electric Motor (Part of an entirety) 150 hp, 1780 rpm, 445T frame, 12"-10 groove pulley, includes Allen Bradley control box with Siemans soft start 119 Helle Operators Cab with Controls (Part of an entirety) Helle computer for setworks, 4' x 6' x 6' tall, heat and AC units, all controls in cab, steps going to cab 120 Helle Mill Entirety of lots 115 to 119 With 10% raise 121 Slab Dump Belt 34" x 11'8", 24" belt, heavy duty built, Helle 5hp hydraulic pack, electric drive, hydraulic lift cylinder, one side support to ground 122 3 Strand Log Deck with Stop'n'Load 10' x 26', hydraulic drive 123 Spiral Roll Case 35" x 41', 9" x 30" rolls, (4) 3' board slides, board stop, spiral rolls, no drive 124 Spiral 41" x 20', 6 1/2" x 36" rolls, electric drive 125 Meadows 2 saw Edger Model: 36D, SN: 36D-1869-13, 40" x 8' infeed, 6" x 16' tailing belt, 2 moving saws, (2) 16" split saws, no power, 2 laser lights 126 World Wide Electric Motor with Starter 50 hp, 1770 rpm, 326T frame, includes Siemans starter 126A Edger Saw Blades 16" split blades, 7 blades 127 Dust Blower 24", 10" inlet, 8" outlet, pipe attached to blower approximately 30'-8" pipe, 3 hp electric motor with cut out 128 4 Strand Transfer Deck 12'6" x 22', electric drive 129 4 Strand Transfer Deck 10' x 28', roof top chain, solid steel decking, electric drive 130 CMC 4 Strand Green Chain 11'4" x 104", 21" x 9' dead rolls on end, electric drive, no electric wires 131 Pendu Dust Blower 24" blower, 10" inlet, 8" outlet, steel elbow, no pipe, 15 hp electric 132 Steel Dust Pipe 8" x 110' spiraled pipe, (1) 10" x 10', some new, includes box of fittings 133 Dead Rolls 23 1/2" x 46', 2 1/2" x 20" rolls, 8" rolls on ends, to be used with belt, electric drive 134 Ingersoll Rand Air Compressor Model: 2475, SN: NAR10290394, 110V Solenoid moisture release valve, 5 hp electric drive, 80 gallon vertical tank 135 Ingersoll Rand Air Compressor Model: 242-5N, SN: 532973, 80 gallon vertical tank, 5 hp electric 136 Morbark 48" Chip-Pak Model: 48, SN: 933, 3 knife chipper, 5' x 6' shaker screen, 4' cyclone, 75 hp electric motor, electric motor starters 137 Morbark Chip Blower 28" blower, 10 hp electric motor, on swivel stand 138 Carrier Vibrating Conveyor Model: LL24120F, SN: C1554, 40" x 50', electric drive, chipper adapter, 12" sides, 24" pan, recent new fiberglass paddles installed 139 Carrier Vibrating Conveyor Model: LL24120F, SN: C1555, 40" x 50', electric drive, 12" sides, 24" pan, recent new paddles installed 140 Helle 3 HB Carriage (1st of an entirety) 36" capacity, 6' x 13' overall, on board chain turner, fully hydraulic dogs and setworks, no controls, on board hydraulic pack, not much use since rebuilt by Helle 141 Track and Frame with Husk, Carriage Drive, and Feed (Part of an entirety) 36" center to center x 55' track, 60 hp hydraulic pack on feed, support to ground, 36" chain turner, 60" husk, 2' x 6' live belt with hydraulic pack on husk 142 Helle Operators Cab (Part of an entirety) 4' x 5' x 6'4" tall, steps and frame, no controls 143 Siemans 125hp Electric Motor (Part of an entirety) 10" - 10 groove pulley, 444T frame, 1785 rpm, 144 Helle Mill Entirety of Lots 140-143 With 10% raise 145 Helle Vertical Edger 2 saw, 22" split saws, opens 28", 40 hp electric motor, support frame 145A Helle Carriage Parts Control box, new cylinders, new encoder, new bucket of paint, new sticker for thickness scale, valves, control handle, new controls cord 146 Helle Carriage Parts Head blocks and more, owner bought carriage for parts, 2 skids of parts 147 60" Circular Saw F style, good saw 148 60" Circular Saw F style, good saw 149 60" Circular Saw F style, shoulder damage 150 Tub Knife Grinder 3 knife holders, 20" capacity, electric drive 151 New Simonds Chipper Knives (18) 14 3/4" x 9" x 375 152 Chipper Knife Holders and Knives (48) unused knives 14 3/4" long, (3) new knife holders 152A Bevel Buddy Knife Dressing Tool Pipers set gauge 152B Chipper Knife Clamps Used knife clamps and box of new stud bolts 159 Square D Control Center and Electrical Lot 3 section 600 amp control center, lots of motor starters, all wire and conduit going to equipment not otherwise lotted and not pertaining to lighting in building 160 Wood-Mizer HR120 Horizontal Resaw Model: HR12017-1, SN: 05140797, meter reads: 56 hours, Kohler diesel engine, power raise and lower, 12" x 6' feed belt with 12V drive, 19" wheels, 1 1/4" bands 160A Brute Optimizing Chop Saw SN: 0100B8LP60, BMI advanced technology computerized controls! Complete system with infeed and out feed tables. Currently in production. Flash drive with all wiring schematics and operators manual. 161 Helle Belt Conveyor 29" x 76", 24" belt, hydraulic drive 162 Helle Roll Case with Pop-Up Transfer 28 1/2" x 10'6", 5 strand pop-up transfer chain 8' x 34", hydraulic drive, hydraulic pop-up cylinder, 8 1/2" x 24" rolls, no power on rolls 163 Helle Spiral Roll Case 25" x 12', 5 1/2" x 21" rolls, no drive 164 Dead Rolls 21" x 9', 3" x 18" rolls 165 3 Strand Log Deck 10' x 18', Tulsa winch gearbox with hydraulic motor, no stop'n'load 166 Shafts with Sprockets and Bearings 3 shafts with stop'n'loads-(1) 9'6" with bearings, (1) 9'2" no bearings; 3 shafts with sprockets and bearings-(1) 11'4", (2) 9' 167 Helle Barn Sweep 37 1/2" x 25', 7" sides, 26" pan, 3" x 9" paddles, hydraulic drive 168 Helle Barn Sweep 37 1/2" x 25', 7" sides, 26" pan, 3" x 9" paddles, hydraulic drive 169 Helle Mud Saw 8" wheel with insert teeth, electric drive 170 Swing Arm Chop Saw 24" blade, no power 171 4 Strand Unscrambler 2 section cross slats, 10'6" wide 63" tall, no drive 172 Bark Conveyor 4' x 30', 16" paddles, no drive 173 Bark Conveyor 2 sections 23" x 20', 15" paddles, electric drive 174 Fuel Tank 8' x 5' 175 Concave Belt Conveyor 26" x 26', hydraulic drive 176 Deck Chain and Skate Rolls (4) Deck chain, 18" x 10' skate rolls, 12" x 6' cement tile 177 Steel I Beams (1) 9'4" x 6" x 12", (1) 1" x 6" x 8" x 7' angle, (1) 8" x 12" x 8', (1) 3" x 4" x 10' angle, (1) 3" x 10" x 10' C-channel 178 Steel Scrap Pile Steel scrap pile behind mill building 200 2018 Komatsu WA200-8 Wheel Loader SN: 85539. Meter reads: 3,461 hours. Engine: Komatsu SAA4D107E-3. Fuel type: Diesel. ROPS: Yes, enclosed. 3rd Valve: Yes. Center to center of pins: 31" W, 17" T. Tire Size: 20.5R25. Attachments: No. Heater: Yes. A/C: Yes. Quick Attach: Yes. Features and Notes: Runs and operates, side window has crack 203 Rockland Grapple Forks Log forks with clamp, quick attach for Komat'su loader 204 GEM Bucket 4 yard bucket, quick attach for Komat'su loader 205 2013 John Deere 344J Wheel Loader SN: 1LV344JXCZB030560. Meter reads: 7,397 hours. Engine: JD 4045HT281. Fuel type: Diesel. ROPS: Yes, enclosed. 3rd Valve: Yes. Center to center of pins: 38" W 24" T. Tire Size: 17.5R25. Attachments: No. Heater: Yes. A/C: Yes. Quick Attach: Yes. Features and Notes: Runs and operates. This item will be reserved for loadout until May 3rd. 206 Rockland Forks Model: LFW 344J, for John Deere 344J loader quick attach 235 207 Lieb Herr Bucket Dirt bucket, fits John Deere 344, quick attach 236 208 1989 John Deere 344E Wheel Loader SN: CK344EB000152. Meter reads: Unknown. Engine: John Deere 4276DT009. Fuel type: Diesel. ROPS: Enclosed. 3rd Valve: No. Tire Size: 15.5-25. Attachments: Lumber forks. Quick Attach: No. Features and Notes: Low hours on rebuilt engine, hydraulic pump needs repair 215 Loader Tire 17.5R25, useable tire 240 Rims with Solid Rubber (4) 22 1/2" x 11" rims, 8 hole lug pattern 241 Rims with Solid Rubber (4) 20 1/2" x 10 1/2" rims, 8 hole lug pattern 242 Axle and Wheels 7'10" axle with 6 lug pattern, 2 wheels tire size 9.00R20, 6 lug pattern 250 1977 Chevrolet C65 Log Truck VIN: CCE677B113497. Meter reads: 20,321 miles. Engine: Gas. Transmission: 5 speed manual. Log loader: No. Suspension: Spring. Features and Notes: Runs and operates, 8' x 16' flatbed with log bunks. Has title. 250A Side Boards for Flatbed Truck Used on lot 250 256 1974 Fruehauf Chip Trailer VIN: MA5470883, model: FBZ9-F2-40, 8' x 40'. Has title. 257 Dorsey Chip Trailer Steel contents, 8' x 48'. No title, bill of sale only 260 Cabinet and Contents New roller chain, belt lacing tool and supplies, filters, 6" belting 261 Spools with Cable 5/8" cable, 1 spool with new length unknown, 2 spools used-length unknown 262 Wheelbarrow and Shovels 263 Chains (1) 14' with 2 hooks, (1) 5' with 2 hooks 264 30" Pedestal Fan Electric 265 Tool Lot 2 shovels, 2 brooms, 1 bar 266 Tools and Belts Grease gun, v-belts, raincoats, 2 shovels, 1 broom, air hose, comalong 267 Cable, V-Belts, and Wire Used cable, heavy electric wire 268 Jones Saw Grinder Model: 6P, powered by Makita drill, extra wheels, saw wrench, swages 269 O-Ring and Clamps Assorted O-rings and parts, c-clamps 270 Hand Tools Pipe wrenches, crescent wrenches, pliers 271 Tool Lot Pipe threader, 1" breaker bar with extension and socket, 3/4" rachet 272 Tool Lot and Pellet Gun Assorted tools, 5" vise 273 Tool Lot 2 brooms, 1 shovel, 1 cant hook 274 Tool Lot 2 axe, sledge, tin snips, plus more 275 Fire Extinguishers 6 pieces, have been serviced in March 24 276 Oil and Misc. Lot 10' chain, 1 hook, bar and chain oil, air hose 277 Banding Cart With steel banding and tools 278 Banding Cart With tools 279 Steel Banding 5/8", 6 rolls new steel banding 280 Maxx-Jack Pallet Jack Model: MJ-55-W 281 Ridgid 10 Gallon Shop Vac 6.5 hp electric, box fan, step stool 282 Poly Wheelbarrow 2 wheeled 283 Pipe Lot 6" x 45", 3" x 45", used to roll out lumber packs 284 Desk and Box with Tools and Parts Hand tools, welding helmet, chainsaw parts, knee hole desk and wooden parts box, all item on top 285 Ingersoll Rand Air Compressor Model: 2475, SN: 9017343, cutout box, air hose, 80 gallon vertical tank, electric drive, working condition 286 Air Compressor Does not work, 15 hp electric motor that works, 80 gallon horizontal tank 287 Milwaukee Chop Saw and Bench Grinder Milwaukee 14" abrasive chop saw, tool shed 6" bench grinder 288 Cutting Torch Set on Cart Tanks do not sell, Saftcart, torch and gauges 289 Bessy Bench Vice and Rigid Grinder 6" bench vice, Rigid 6" electric grinder 290 Conveyor Belting 24" x length unknown-new belt; 16" x length unknown-used belt 291 New GE Electric Motor 5 hp, 1765 rpm, 34T Frame, new motor 292 Milwaukee Cordless 18V Impact 1/2" square ting impact wrench, 3 batteries, working condition 293 DeWalt 1/2" Cordless Drill 20V max brushless drill, 3 batteries, 1 charger, working condition 294 Pump and Parts Skid of parts, hand crank oil pump, assorted pulleys, misc. parts 295 Electric Motors and Parts Parts and scrap metal in shop that has not been previously lotted, lots of electric motors and wires, deck chains, pulleys, sprockets, engine block, plus more. Wood stove does not sell 296 Belts and Hoses New and used belts, hard hat, cutting wheels 297 Parts and Tools New rulers, cutting wheels, tree paint, lot of parts 298 Sprockets and Pulleys Lots of new sprockets, seal kits, debarker cylinders, new bearings, Morbark shaker rod 299 Central Pneumatic Air Compressor 2 hp, 4 gallon tank, electric 300 Shelf of Parts Lots of bolts, buckets of bolts 301 Buckets of Bolts All bolts and parts on shelf 312 302 Electrical Boxes and Old School Desk 303 Simond Chipper Knives 18 new knives, 14 3/4" x 4" x .375 304 Simonds Teeth and Shanks New and used F shanks, 2 box new teeth 305 Menpminee Hard Chrome Teeth 5 box new teeth 306 Ingersoll Rand Air Dryer and Dust Blower Refrigerant air dryer (came with compressor but owner didn't use), 12" blower, 6" inlet, 4" outlet, 2 hp electric motor 307 Brother Coyer, Heater, Fan, and School Desk Frame 24" box fan, electric heater, Brother printer-copier, 2 school desk frames 308 Craftsman Motorcycle/ATV Stand Motorcycle lift stand on casters, 1500 lbs capacity 309 Motor Starters 2 starters, condition or brand unknown 310 Chicago Electric Chainsaw Grinder Bench mount saw chain grinder, 2 amber strobe light, 12V, ear plugs 311 Oil and Fuel Filters New filters for Komatsu loaders 313 Hydraulic Quick Coupler Fittings and Box of Supplies Quick couplers for Komatsu loader, box of shop supplies 314 Hitachi Seal Kits Seal supplies for Hitachi loaders 315 Laser Lights 2 laser lights, have been factory rebuilt 316 Filters and Seal Kit Filters for Komatsu loader, seal kit for debarker

Close X

Gallery Images Loading, Please Wait...

Close X

Save this sale to your Saved Sales list!

Your Saved Sales list is an easy way to return to sale listings which are of interest to you.

Login

Username:

Password:

Sign Up

FREE EMAIL NOTIFICATIONS
auction listings delivered to your inbox

Close X

Sign Up

FREE EMAIL NOTIFICATIONS
auction listings delivered to your inbox

Login

Username:

Password:

Return

Landmark Wood Products - Sawmill Equipment - English, IN

Live Auction

View Gallery (145)

Auction Date(s)

Wednesday Apr 24, 2024 Completed

Auction Location

English, IN 47118

View Map

Company

Bright Star Realty and Auctions, INC

Contact: Loren Beachy
Phone: 574-825-0704
Website: brightstarauctions.com

Listing Terms and Conditions

Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded where required.
Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer:

Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.

Governing Law.
1. For Auctions in the State of Indiana and Online. Unless otherwise indicated, all Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are deemed to be entered into in the State of Indiana, all bids and payments are deemed to be received in the State of Indiana, and the contract, if any, will be deemed to be formed and entered into in the State of Indiana.
Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.
Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
Nature of the Auction. This Property is being sold at the Auction in the manner indicated on the first page of this Agreement.
Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
2. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
3. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
4. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
5. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
6. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
7. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
8. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.

1. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties, (i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
2. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
3. No Reduction or Retraction of Online Bids. Online bids may not be reduced or retracted.
4. Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.
5. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.
Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). All prebids and maxbids placed online are considered absentee bids. Auctioneer pledges complete integrity in the treatment of absentee bids and absentee bids may be initiated and advanced in accordance with Auctioneer’s policies and procedures. Auctioneer has the right to initiate any absentee bids at 25% to 50% of their maximum amount. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot of Personal Property will be the Buyer of such Property.
All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.
Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or representation by Auctioneer.
Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ringman, or multiple bid assistants or ringmen, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked-Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases are due upon receipt of your invoice. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. Cash payments totaling Ten Thousand Dollars ($10,000) or more will not be accepted. If onsite bidders wish to send a wire, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.

Wire Transfer Payments. Buyer shall obtain verbal verification of all bank account information from Bright Star Auctions prior to initiating transfer. Except as otherwise provided by law, we shall not be liable for any loss or damage due to misplaced, unauthorized or fraudulent fund transfers.
ACH/eCheck Payments. By providing account information to Bright Star Auctions, buyer gives permission for Bright Star Auctions to retain payment information on file and represents they are the authorized account holder. Upon authorization to collect payment from Buyer’s account and prior to transfer, Buyer is responsible to notify their financial institution of the impending transaction. Buyer agrees to notify Bright Star Auctions of any changes in account information.
Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.
No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Tools, packing material, and/or assistance will not be supplied at Pickup, so Buyer must plan accordingly. Disassembly and removal shall be done in a quiet and workmanlike manner, and each Buyer, in making its bid, shall thereby indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer’s employees, agents, representatives, or independent contractors in connection with the Pickup. Any and all damages to the Pickup site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller. Each Buyer must show a copy of the invoice (digital or hard copy) and government-issued photo identification before Lots will be released. No Buyer shall bring pets or young children to the Pickup, as the movement of Lots presents an extremely high-risk environment that could result in injury or death.
Insurance. Any work performed by Purchaser(s) or Purchaser Representative (including sub-contractors) shall be insured and provide proof of coverage against all claims for injuries against persons or damages to property which may arise from or in connection with the removal of items or equipment. Insurance coverage requirements are as follows: General Liability $1,000,000/$2,000,000 and Worker’s Compensation $1,000,000 or as required by State Law. Seller shall be listed as additionally insured, if required.
Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them. In addition, Buyer’s bidding privileges may be suspended at future auctions.

Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.
Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled to specific performance or other equitable relief.
Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim or suit relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their rights.

After many successful years in the lumber industry, Mr. Smith has made the decision to retire and will be liquidating his complete sawmill operation at auction.

Heavy Equipment Key Set 36 Keys
Shipping available for $20

SDRTOP Manual Sealless Steel Strapping Tool
Model A333, works for 1/2" 5/8" or 3/4" banding, new in box. Shipping available for $30

100

Husqvarna 385XP Chain Saw
24" bar

101

Husqvarna 455 Chainsaw
20" bar

102

Husqvarna 455 Rancher Chainsaw
20" bar

103

Husqvarna 455 Chainsaw
20" bar

104

Husqvarna 414EL Chainsaw
16" bar, electric

105

New Jones Grinder
Model: 6, SN: 623127J, powered by Wenger drill

106

Archer 2 Computer Tallies
1 unit does log tally, 1 unit does log and lumber tallies, chargers included, these unit were being used

107

Lumber Grading and Marking Sticks
24" grading stick-New, (2) 36" crayon holder

108

Husky Tool Chest
26" x 16" x 12", Micro switches and more, heat gun, Torque 1/2" wrench

109

US General Tool Chest
30" x 36" x 20", 5 drawer, loaded with tools, Milwaukee 4 1/2" grinder, sockets, open end wrenches, lots of supplies

110

111

Bark Conveyor
Heavy Duty shop built, 42" x 20' flat section, 34' elevated section, 2" x 2" x 16" paddles, hydraulic drive

112

3 Strand Log Deck
8'6" x 18', no stop'n'load, electric drive

112A

New Aluminum Debarker Head
2 3/16" x 32" shaft, 12" head, new head was bought for Fulghum debarker

115

Helle 3 HB Modular Carriage
(1st of an entirety) 36" capacity, 7'4" x 14' overall, 5 axles, fully hydraulic dogs and setworks, no controls, 10 hp electric hydraulic unit on board

116

117

118

Jasper Electric Motor
(Part of an entirety) 150 hp, 1780 rpm, 445T frame, 12"-10 groove pulley, includes Allen Bradley control box with Siemans soft start

119

Helle Operators Cab with Controls
(Part of an entirety) Helle computer for setworks, 4' x 6' x 6' tall, heat and AC units, all controls in cab, steps going to cab

120

Helle Mill Entirety of lots 115 to 119
With 10% raise

121

Slab Dump Belt
34" x 11'8", 24" belt, heavy duty built, Helle 5hp hydraulic pack, electric drive, hydraulic lift cylinder, one side support to ground

122

3 Strand Log Deck with Stop'n'Load
10' x 26', hydraulic drive

123

Spiral Roll Case
35" x 41', 9" x 30" rolls, (4) 3' board slides, board stop, spiral rolls, no drive

124

Spiral
41" x 20', 6 1/2" x 36" rolls, electric drive

125

Meadows 2 saw Edger
Model: 36D, SN: 36D-1869-13, 40" x 8' infeed, 6" x 16' tailing belt, 2 moving saws, (2) 16" split saws, no power, 2 laser lights

126

World Wide Electric Motor with Starter
50 hp, 1770 rpm, 326T frame, includes Siemans starter

126A

Edger Saw Blades
16" split blades, 7 blades

127

Dust Blower
24", 10" inlet, 8" outlet, pipe attached to blower approximately 30'-8" pipe, 3 hp electric motor with cut out

128

4 Strand Transfer Deck
12'6" x 22', electric drive

129

4 Strand Transfer Deck
10' x 28', roof top chain, solid steel decking, electric drive

130

CMC 4 Strand Green Chain
11'4" x 104", 21" x 9' dead rolls on end, electric drive, no electric wires

131

Pendu Dust Blower
24" blower, 10" inlet, 8" outlet, steel elbow, no pipe, 15 hp electric

132

Steel Dust Pipe
8" x 110' spiraled pipe, (1) 10" x 10', some new, includes box of fittings

133

Dead Rolls
23 1/2" x 46', 2 1/2" x 20" rolls, 8" rolls on ends, to be used with belt, electric drive

134

Ingersoll Rand Air Compressor
Model: 2475, SN: NAR10290394, 110V Solenoid moisture release valve, 5 hp electric drive, 80 gallon vertical tank

135

Ingersoll Rand Air Compressor
Model: 242-5N, SN: 532973, 80 gallon vertical tank, 5 hp electric

136

Morbark 48" Chip-Pak
Model: 48, SN: 933, 3 knife chipper, 5' x 6' shaker screen, 4' cyclone, 75 hp electric motor, electric motor starters

137

Morbark Chip Blower
28" blower, 10 hp electric motor, on swivel stand

138

Carrier Vibrating Conveyor
Model: LL24120F, SN: C1554, 40" x 50', electric drive, chipper adapter, 12" sides, 24" pan, recent new fiberglass paddles installed

139

Carrier Vibrating Conveyor
Model: LL24120F, SN: C1555, 40" x 50', electric drive, 12" sides, 24" pan, recent new paddles installed

140

141

142

Helle Operators Cab
(Part of an entirety) 4' x 5' x 6'4" tall, steps and frame, no controls

143

Siemans 125hp Electric Motor
(Part of an entirety) 10" - 10 groove pulley, 444T frame, 1785 rpm,

144

Helle Mill Entirety of Lots 140-143
With 10% raise

145

Helle Vertical Edger
2 saw, 22" split saws, opens 28", 40 hp electric motor, support frame

145A

Helle Carriage Parts
Control box, new cylinders, new encoder, new bucket of paint, new sticker for thickness scale, valves, control handle, new controls cord

146

Helle Carriage Parts
Head blocks and more, owner bought carriage for parts, 2 skids of parts

147

60" Circular Saw
F style, good saw

148

60" Circular Saw
F style, good saw

149

60" Circular Saw
F style, shoulder damage

150

Tub Knife Grinder
3 knife holders, 20" capacity, electric drive

151

New Simonds Chipper Knives
(18) 14 3/4" x 9" x 375

152

Chipper Knife Holders and Knives
(48) unused knives 14 3/4" long, (3) new knife holders

152A

Bevel Buddy Knife Dressing Tool
Pipers set gauge

152B

Chipper Knife Clamps
Used knife clamps and box of new stud bolts

159

160

Wood-Mizer HR120 Horizontal Resaw
Model: HR12017-1, SN: 05140797, meter reads: 56 hours, Kohler diesel engine, power raise and lower, 12" x 6' feed belt with 12V drive, 19" wheels, 1 1/4" bands

160A

161

Helle Belt Conveyor
29" x 76", 24" belt, hydraulic drive

162

Helle Roll Case with Pop-Up Transfer
28 1/2" x 10'6", 5 strand pop-up transfer chain 8' x 34", hydraulic drive, hydraulic pop-up cylinder, 8 1/2" x 24" rolls, no power on rolls

163

Helle Spiral Roll Case
25" x 12', 5 1/2" x 21" rolls, no drive

164

Dead Rolls
21" x 9', 3" x 18" rolls

165

3 Strand Log Deck
10' x 18', Tulsa winch gearbox with hydraulic motor, no stop'n'load

166

Shafts with Sprockets and Bearings
3 shafts with stop'n'loads-(1) 9'6" with bearings, (1) 9'2" no bearings; 3 shafts with sprockets and bearings-(1) 11'4", (2) 9'

167

Helle Barn Sweep
37 1/2" x 25', 7" sides, 26" pan, 3" x 9" paddles, hydraulic drive

168

Helle Barn Sweep
37 1/2" x 25', 7" sides, 26" pan, 3" x 9" paddles, hydraulic drive

169

Helle Mud Saw
8" wheel with insert teeth, electric drive

170

Swing Arm Chop Saw
24" blade, no power

171

4 Strand Unscrambler
2 section cross slats, 10'6" wide 63" tall, no drive

172

Bark Conveyor
4' x 30', 16" paddles, no drive

173

Bark Conveyor
2 sections 23" x 20', 15" paddles, electric drive

174

Fuel Tank
8' x 5'

175

Concave Belt Conveyor
26" x 26', hydraulic drive

176

Deck Chain and Skate Rolls
(4) Deck chain, 18" x 10' skate rolls, 12" x 6' cement tile

177

Steel I Beams
(1) 9'4" x 6" x 12", (1) 1" x 6" x 8" x 7' angle, (1) 8" x 12" x 8', (1) 3" x 4" x 10' angle, (1) 3" x 10" x 10' C-channel

178

Steel Scrap Pile
Steel scrap pile behind mill building

200

203

Rockland Grapple Forks
Log forks with clamp, quick attach for Komat'su loader

204

GEM Bucket
4 yard bucket, quick attach for Komat'su loader

205

206

Rockland Forks
Model: LFW 344J, for John Deere 344J loader quick attach

235

207

Lieb Herr Bucket
Dirt bucket, fits John Deere 344, quick attach

236

208

215

Loader Tire
17.5R25, useable tire

240

Rims with Solid Rubber
(4) 22 1/2" x 11" rims, 8 hole lug pattern

241

Rims with Solid Rubber
(4) 20 1/2" x 10 1/2" rims, 8 hole lug pattern

242

Axle and Wheels
7'10" axle with 6 lug pattern, 2 wheels tire size 9.00R20, 6 lug pattern

250

250A

Side Boards for Flatbed Truck
Used on lot 250

256

1974 Fruehauf Chip Trailer
VIN: MA5470883, model: FBZ9-F2-40, 8' x 40'. Has title.

257

Dorsey Chip Trailer
Steel contents, 8' x 48'. No title, bill of sale only

260

Cabinet and Contents
New roller chain, belt lacing tool and supplies, filters, 6" belting

261

Spools with Cable
5/8" cable, 1 spool with new length unknown, 2 spools used-length unknown

262

Wheelbarrow and Shovels

263

Chains
(1) 14' with 2 hooks, (1) 5' with 2 hooks

264

30" Pedestal Fan
Electric

265

Tool Lot
2 shovels, 2 brooms, 1 bar

266

Tools and Belts
Grease gun, v-belts, raincoats, 2 shovels, 1 broom, air hose, comalong

267

Cable, V-Belts, and Wire
Used cable, heavy electric wire

268

Jones Saw Grinder
Model: 6P, powered by Makita drill, extra wheels, saw wrench, swages

269

O-Ring and Clamps
Assorted O-rings and parts, c-clamps

270

Hand Tools
Pipe wrenches, crescent wrenches, pliers

271

Tool Lot
Pipe threader, 1" breaker bar with extension and socket, 3/4" rachet

272

Tool Lot and Pellet Gun
Assorted tools, 5" vise

273

Tool Lot
2 brooms, 1 shovel, 1 cant hook

274

Tool Lot
2 axe, sledge, tin snips, plus more

275

Fire Extinguishers
6 pieces, have been serviced in March 24

276

Oil and Misc. Lot
10' chain, 1 hook, bar and chain oil, air hose

277

Banding Cart
With steel banding and tools

278

Banding Cart
With tools

279

Steel Banding
5/8", 6 rolls new steel banding

280

Maxx-Jack Pallet Jack
Model: MJ-55-W

281

Ridgid 10 Gallon Shop Vac
6.5 hp electric, box fan, step stool

282

Poly Wheelbarrow
2 wheeled

283

Pipe Lot
6" x 45", 3" x 45", used to roll out lumber packs

284

Desk and Box with Tools and Parts
Hand tools, welding helmet, chainsaw parts, knee hole desk and wooden parts box, all item on top

285

Ingersoll Rand Air Compressor
Model: 2475, SN: 9017343, cutout box, air hose, 80 gallon vertical tank, electric drive, working condition

286

Air Compressor
Does not work, 15 hp electric motor that works, 80 gallon horizontal tank

287

Milwaukee Chop Saw and Bench Grinder
Milwaukee 14" abrasive chop saw, tool shed 6" bench grinder

288

Cutting Torch Set on Cart
Tanks do not sell, Saftcart, torch and gauges

289

Bessy Bench Vice and Rigid Grinder
6" bench vice, Rigid 6" electric grinder

290

Conveyor Belting
24" x length unknown-new belt; 16" x length unknown-used belt

291

New GE Electric Motor
5 hp, 1765 rpm, 34T Frame, new motor

292

Milwaukee Cordless 18V Impact
1/2" square ting impact wrench, 3 batteries, working condition

293

DeWalt 1/2" Cordless Drill
20V max brushless drill, 3 batteries, 1 charger, working condition

294

Pump and Parts
Skid of parts, hand crank oil pump, assorted pulleys, misc. parts

295

296

Belts and Hoses
New and used belts, hard hat, cutting wheels

297

Parts and Tools
New rulers, cutting wheels, tree paint, lot of parts

298

Sprockets and Pulleys
Lots of new sprockets, seal kits, debarker cylinders, new bearings, Morbark shaker rod

299

Central Pneumatic Air Compressor
2 hp, 4 gallon tank, electric

300

Shelf of Parts
Lots of bolts, buckets of bolts

301

Buckets of Bolts
All bolts and parts on shelf

312

302

Electrical Boxes and Old School Desk

303

Simond Chipper Knives
18 new knives, 14 3/4" x 4" x .375

304

Simonds Teeth and Shanks
New and used F shanks, 2 box new teeth

305

Menpminee Hard Chrome Teeth
5 box new teeth

306

Ingersoll Rand Air Dryer and Dust Blower
Refrigerant air dryer (came with compressor but owner didn't use), 12" blower, 6" inlet, 4" outlet, 2 hp electric motor

307

Brother Coyer, Heater, Fan, and School Desk Frame
24" box fan, electric heater, Brother printer-copier, 2 school desk frames

308

Craftsman Motorcycle/ATV Stand
Motorcycle lift stand on casters, 1500 lbs capacity

309

Motor Starters
2 starters, condition or brand unknown

310

Chicago Electric Chainsaw Grinder
Bench mount saw chain grinder, 2 amber strobe light, 12V, ear plugs

311

Oil and Fuel Filters
New filters for Komatsu loaders

313

Hydraulic Quick Coupler Fittings and Box of Supplies
Quick couplers for Komatsu loader, box of shop supplies

314

Hitachi Seal Kits
Seal supplies for Hitachi loaders

315

Laser Lights
2 laser lights, have been factory rebuilt

316

Filters and Seal Kit
Filters for Komatsu loader, seal kit for debarker

Landmark Wood Products - Sawmill Equipment - English, INPrevious Page Listing ID#: 1597828

Free Email Notifications

Share This Listing

Other Sales byThis Company

Sponsored Links

Landmark Wood Products - Sawmill Equipment - English, IN

Login

Sign Up

Sign Up

Login

Landmark Wood Products - Sawmill Equipment - English, IN
Previous Page Listing ID#: 1597828

Other Sales by
This Company