Formerly Lapp Lumber Co - Sawmill Equipment & Rolling Stock - Paradise, PA
Previous Page Listing ID#: 1556867

Auction Location

Paradise, PA 17562
Auction Dates and TimesSALE IS COMPLETED
Thursday Dec 14, 2023 Completed
Auction Type
 Live Auction 
Company Information
Bright Star Realty and Auctions, INC

Contact: Loren Beachy
Phone: 574-825-0704
Email: beachyauctions@gmail.com
Website: brightstarauctions.com

GoToAuction.com ID#: 5286
View company information and listings

Free Email Notifications

Sign up for the GoToAuction.com email notifications and we will let you know about sales in your area!  You may set up alerts by area (zip and radius), keywords, and by company.  It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions

Bidder Terms and Conditions
There is a 13% online buyer’s premium in effect for all purchases made online. Buyer’s premium is 10% for onsite bidders. All items sell where is as is with no warranties or guarantees. Buyer is responsible to inspect all merchandise prior to placing bids. Payment terms: Cash, check, wire transfer. Cash Payments totaling $10,000 or more will not be accepted. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice. Onsite buyers, payment is due the day of the auction. If onsite bidders wish to send a wire and still be assessed only the onsite buyer’s premium, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. All items are pick-up only. Smalls must be removed within 2 days. All items must be removed within 30 days unless otherwise noted. Loadout available day of auction, after that by appointment. Please call agent for more info. Buyer shall assume responsibility of all property when auctioneer says sold. Auction company is not responsible for any missing or stolen items.
These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer.
  1. Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
  2. Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded where required.
  3. Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer:
“Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction.
“Absentee Bidder” means a person or entity that submits an Absentee Bid.
“Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION.
“Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids.
“Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected.
“Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder.
“Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms.
“Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer.
"Buyer" means the Winning Bidder with respect to each Lot of Personal Property.
"Buyer's Premium" is an amount with respect to each Lot of Personal Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account.
“Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation.
“Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer.
“High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot.
“High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on the Lot put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price.
“High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot.
"Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event.
“Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer.
“No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale.
“Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions.
“Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online.
"Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered.
“Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers.
“Personal Property” means all tangible and moveable property, including fixtures, designated as Property.
“Pick-up” means the act of picking up or removing sold Lots by respective Winning Bidders at the date(s), time(s), and location indicated for such during the Auction or as later agreed to by Seller and Buyer.
“Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer).
“Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms-length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction.
“Property” means the Real Property and the Personal Property.
“Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium.
"Registered Bidder" means a person or entity that has registered to bid at the Auction.
“Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction.
“Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE.
“Reserve Price” means the minimum price that Seller is willing to accept for specific Property.
“Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer.
“Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid.
“Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by Seller).
"Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid.
“Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction.
  1. Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.

 

  1. Governing Law.
    1. For Auctions in the State of Indiana and Online. Unless otherwise indicated, all Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are deemed to be entered into in the State of Indiana, all bids and payments are deemed to be received in the State of Indiana, and the contract, if any, will be deemed to be formed and entered into in the State of Indiana.
  2. Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.
  3. Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
  4. Nature of the Auction. This Property is being sold at the Auction in the manner indicated on the first page of this Agreement.
  5. Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
  6. No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
  7. Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
    1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
    2. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
    3. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
    4. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
    5. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
    6. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
    7. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
    8. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.
 
    1. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties, (i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
    2. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
    3. No Reduction or Retraction of Online Bids. Online bids may not be reduced or retracted.
    4. Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.
    5. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.
  1. Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). All prebids and maxbids placed online are considered absentee bids. Auctioneer pledges complete integrity in the treatment of absentee bids and absentee bids may be initiated and advanced in accordance with Auctioneer’s policies and procedures. Auctioneer has the right to initiate any absentee bids at 25% to 50% of their maximum amount. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
  2. Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
  3. Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
  4. Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
  5. Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot of Personal Property will be the Buyer of such Property.
  6. All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
  7. Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
  8. Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.
  9. Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or representation by Auctioneer.
  10. Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
  11. Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
  12. Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ringman, or multiple bid assistants or ringmen, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
  13. Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
  14. All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
  15. Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked-Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
  16. Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases are due upon receipt of your invoice. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. Cash payments totaling Ten Thousand Dollars ($10,000) or more will not be accepted. If onsite bidders wish to send a wire, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.
 
  1. Wire Transfer Payments. Buyer shall obtain verbal verification of all bank account information from Bright Star Auctions prior to initiating transfer. Except as otherwise provided by law, we shall not be liable for any loss or damage due to misplaced, unauthorized or fraudulent fund transfers.
  2. ACH/eCheck Payments. By providing account information to Bright Star Auctions, buyer gives permission for Bright Star Auctions to retain payment information on file and represents they are the authorized account holder. Upon authorization to collect payment from Buyer’s account and prior to transfer, Buyer is responsible to notify their financial institution of the impending transaction. Buyer agrees to notify Bright Star Auctions of any changes in account information.
  3. Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.
  4. No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
  5. Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Tools, packing material, and/or assistance will not be supplied at Pickup, so Buyer must plan accordingly. Disassembly and removal shall be done in a quiet and workmanlike manner, and each Buyer, in making its bid, shall thereby indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer’s employees, agents, representatives, or independent contractors in connection with the Pickup. Any and all damages to the Pickup site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller. Each Buyer must show a copy of the invoice (digital or hard copy) and government-issued photo identification before Lots will be released. No Buyer shall bring pets or young children to the Pickup, as the movement of Lots presents an extremely high-risk environment that could result in injury or death.
  6. Insurance. Any work performed by Purchaser(s) or Purchaser Representative (including sub-contractors) shall be insured and provide proof of coverage against all claims for injuries against persons or damages to property which may arise from or in connection with the removal of items or equipment. Insurance coverage requirements are as follows: General Liability $1,000,000/$2,000,000 and Worker’s Compensation $1,000,000 or as required by State Law. Seller shall be listed as additionally insured, if required.
  7. Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them. In addition, Buyer’s bidding privileges may be suspended at future auctions.

  1. Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
  2. Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.
  3. Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled to specific performance or other equitable relief.
  4. Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
  5. Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
  6. Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
  7. Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
  8. Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
  9. Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim or suit relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
  10. Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their rights.

Listing Information
Lapp Lumber has been a trusted name for many years, enjoying numerous prosperous periods. Recently, when an opportunity presented itself to pursue other interests, the decision was made to sell the mill. Rest assured, the quality of this auction will impress. We offer a range of well-maintained, single-owner equipment!

00
Information Lot
Taking Consignments!
Auction agents: Eugene Hochstetler 574-242-1100 and Daniel Stoltzfus 717-406-9611
Type of auctionSawmill Liquidation and Rolling Stock
Highlight piecesWheel Loaders, Forklifts, Knucklebooms, Late Model Brewco B1600 Grade Resaw, Morbark Debarker, Precision Chip Pac, and More!

01
Preview & Inspection
Buyers are responsible to do their own inspection to determine the condition of the items they purchase. Inspections times are available as follows: Week of auction 8 to 5 or by appointment. Contact Eugene 574-242-1100

02
Loadout Information
Bright Star Auction Staff (Mose Troyer - 330-763-3780) will be on site day of auction until dark, Friday 12-15 from 8 to 4, and 12/18, 19, & 20 from 8 to 4. Yard will be closed on Saturday 12/16. After these dates you will need to contact Premier Rigging @ 260-214-1481 for an appointment.

03
Payment Information
Payment terms: 10% Onsite and 13% Online Buyer's Premium in affect for all purchases. Cash, check, wire transfer. Cash Payments totaling $10,000 or more will not be accepted. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice. Onsite buyers, payment is due the day of the auction. If onsite bidders wish to send a wire and still be assessed only the onsite buyer’s premium, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction.

 

04
CAT 390F L Hydraulic Excavator 1:50 Scale Replica - Die Cast Metal
Have fun buying a high-quality, die-cast toy! All proceeds including buyer's premium will go to Feed My Starving Children (FMSC) which is a Christian nonprofit dedicated to seeing every child and person around the world healthy, nourished and whole in body and spirit. Bright Star will pay for standard shipping and handling to the 48 contiguous states for buyers of this lot.
https://www.youtube.com/watch?v=jYATxeDmuzM&t=8s
 

90
Heavy Equipment Key Set 36 Keys
Shipping available for $20

91
Manual Sealless Steel Strapping Tool
Model A333, works for 1/2" 5/8" or 3/4" banding, new in box. Shipping available for $30

92
Stihl MS 660 Chain Saw
Good condition

93
Stihl MS 362 Chain Saw
Good condition

94
Stihl 036 Pro Chain Saw
Good condition

95
Stihl MSE 170C and MSE 140C Chain Saw
Electric, good condition

96
Stihl FS 91 Weedeater
String head, hand bar, and back sling. Good condition

97
DeWalt Cordless Tool Set
Sawzall, Lite, 2 drills, 2 batteries, carry case, impact, adapter for older style batteries

97A
Lincoln Battery Grease Gun
Extra battery and charger, carry case

97B
New Ingersoll Rand 3/4" Air Impact

99A

99A
2009 Wrens Handheld P-4000 Metal Detector
SN: 131181, battery charger, hardcase, hardware removal tools

100
2018 Morbark 640 Debarker
(1st of an entirety) In great conditon! Model: 640, SN: 1148, Weg 50 hp electric hydraulic pack, no power on head, feed rolls hydraulic driven, no hoses going to equipment

101
Weg Electric Motor
(Part of an entirety) 100 hp, 1775 rpm, 60 hz, 404/5T frame, starter box

102
Morbark Operator Cab with Controls
(Part of an entirety) 54" x 58" x 80", has heat and AC, includes control valves, insulated, hoses to equipment, and steps

103
Morbark Infeed Conveyor
(Part of an entirety) 52" x 26', 11" ladder back chain, hydraulic drive, no controls, lift cylinder on end

104
Morbark Outfeed Conveyor
(Part of an entirety) 52" x 30', 11" ladder back chain, hydraulic drive

105
2018 Morbark Debarker Entirety of Lots 100-104
With 10% raise.

106
Catwalk and Stairs
40" x 16' with rail, 48" top of platform, 2 pieces

106A
MDI Log Metal Detector
Model: TWA-2000, 56" x 48" inside opening, 5' x 8' overall, 52" x 90" mounting holes, control box. Looks to be in good condition.

106B
Fiberglass Conveyor Section
53" x 10', 26" pan, 24" sides, good condition

107
Morbark Log Trough with Kickers
62" x 32', 19" pan, 11" chain with side rakes, 6 arm kickers with hydraulic cylinder, hydraulic drive

108
Morbark Log Trough
Model: 25IN, SN: 1149, 62" x 13', hydraulic drive, infeed trough, 11" chain with side rakes

109
Barn Sweep Conveyor
42" x 72' flat section, 26' elevated, 16" paddles welded on chain, electric drive

110
Mellott 4 Strand Log Deck
stop'n'load, 18' x 26', 2 drive units with hydraulic drive, can be split for 2 decks with 2 strands

111
1980 Corley Carriage and Track
(1st of an entirety) SN 40-TD-014, 4 head block, turbo turners, on board electric hydraulic pak, Corley comp set PLC setworks controls, hydraulic setworks, air dogs, 60' track bolted on wood, 20' long, 7 axles, pantograph arm,

112
Carriage Drive and Feed
(Part of an entirety) Model: MR4-95 TW-3, hydraulic motor on cable drum, 100 hp electric motor with direct mount pump, control valve in cab, includes motor starter, 20" drum, 5/8" cable. Danfoss pump: 90R13OKA1CD80L3, C8F06GBA202020

113
Corley Husk 56" with 34" Topsaw
(Part of an entirety) 8' x 8' frame, no power, no saw, 30 hp electric on topsaw, 24" x 6' live belt

113A
Century Electric Motor
(Part of an entirety) Model: SC585-WS5U-5BU, 125 hp, 1170 rpm, manual starter, cutout box

114
Corley Cab
(Part of an entirety) 4' x 4'6" x 7', no controls, not insulated, AC unit

115
Corley Slab Drop Belt
(Part of an entirety) 36" x 12', 26" wide drop with 24" belt, electric drive

116
Corley Bar Type Turner
(Part of an entirety) 4' bar, control valve in cab, hydraulic drive

117
Corley Carriage Entirety of Lots 111-116
With 10% raise.

118
Mellott 4 Strand Log Deck
18' x 20' with 30" nose skids, stop'n'load, Tulsa gearbox with electric motor, cutout box, control switch in cab

119
Corley Edger and Gangsaw
Model: 648, SN: 76-E648-003, 6" x 48" capacity, 48" x 10' infeed rolls, no power, 2 lasers, 1 moving blade and 1 stationary for board edging, 4 stationary blades for gangsaw, 20" blades, popup side press roll, Lewis computer controls, 48" x 10' live outfeed rolls

119A
Pacemaker Electric Motor
100 hp, 405T frame, 1780 rpm

120
Live Roll Case with Pop-Up Transfer
24' x 12' roll case, 3 strand transfer 10'6" x 5', air popup cylinder, stop switch, electric drive

121
Spiral Roll Case and Side Transfer Rolls
36" x 16', 6 1/2" x 24" rolls, electric drive, 25" x 11' skate rolls, 2" x 21" rolls, 36" backstop with live press down rolls

122
Mellott Transfer Belt
26" x 10', 22" belt, no drive, elevated, adjustable legs

123
Frontline 42" Dust Blower
Model: F42ML, SN: 210515, 16" inlet, 14" outlet, 30 hp electric motor

124
Steel Dust Pipe
20' x 16", 85' x 14"-40' is new

125
Cornell Dust Blower and Pipe
26" blower, 10" inlet, 8" outlet, 30' x 8" steel pipe, 10' x 8" flex pipe, 3 hp electric motor

126
Live Roll Case
33" x 15'6", 6 1/2" x 24" rolls, stop switch, no drive

127
Live Roll Case with Board Kicker
33' x 14', 6 1/2" x 24" rolls, stop'n'kick switch, no drive

128
Live Roll Case
30" x 8', 6 1/2" x 24" rolls, electric drive

129
4 Strand Transfer Deck
12' x 10', H78 rooftop chain, steel slant decking for side loading, electric drive

130
Brewco Wolf B-1600 Resaw
(1st of an entirety) Model: B1600, SN: BEB06119, 1 3/4" x 40" solid steel band wheels, 2" bands, block guide system, 30 hp electric on head, no controls, 16" x 9' triple web feed with hydraulic drive, no support steel

131
Brewco Operator Cab with Controls
(Part of an entirety) 4' x 5', Brewco control station, full view glass, no support steel, has AC unit

132
Brewco Run Around System
(Part of an entirety) 5 way board separator, all rolls and decks for cant return and boards away, included hydraulic pak, no support steel, no controls

133
Brewco B-1600 Resaw and Run Around System Entirety of Lots 130-132
With 10% raise.

133A
Brewco E-Z Guide Dresser
6" cutting blade, electric drive.

133B
Bandsaw Blades
33 resharpened, 32 dull, 23' x 2" x .055" x 747 WM

134
Cat Walk and Support Steel under Resaw
As marked

135
28" Dust Blower
15 hp electric motor, 10" inlet, 8" outlet, steel elbow. Good condition

136
8" PVC Pipe
100'

137
Mellott Vibrating Conveyor
34" x 36' has 8" sies, one side slanted with 24" pan, 27" x 26' has 8" sides, 24" pan, screen section, steel support to ground are welded together to make 62', electric drive

138
Steel Side Pan
76" x 28', 1 1/2" x 4" C-Channel and 3/16" plate, support posts as marked

138A
Pavement Liner
12'4" wide, length unknown

139
Reckart 5 Strand Transfer Deck
14' x 18' plus 5' 6" pop-up transfer with electric drive, cant holding deck, support to ground, electric drive

140
Reckart 5 Strand Transfer Deck
Make: 08, Size: LD30, SN: 456, 14' x 11', board stop, electric drive, 1 end support to ground, 1 end first I-Beam support only

141
Roll Case with Spiral Rolls
30" x 32', 11" x 24" rolls, 16' has spiral rolls, electric drive, no support to ground

142
5 Strand Transfer Deck
15' x 6', 1' dead rolls, electric drive, no support to ground as marked

143
Reckart 4 Strand Transfer Deck with Pickup Arms
Make: 08, Size: 81X, SN 678, electric drive, air cylinder on cant pickup arms, 6'6" arms, 11' x 12' deck, board stop

144
Reckart 6 Strand Elevator
16' x 10'4" at base 10' tall, no support to ground, electric drive

145
Reckart 5 Strand Transfer Deck
Make: 06, Size: 81X, SN 676, 13' x 24', 4' slide pan on end, board stop, electric drive, no shaft or sprockets on one end

145A
Live Roll Case
28" x 30', 6 1/2" x 24" rolls, electric drive

146
Shurman Gangsaw
Model: 8-5BA-42, SN: 1364, single arbor, 13 blade setup, 26" blades, 8" x 42" capacity, 54" x 10' dead roll infeed, pop-up side press rolls, no power, 16 extra blades and collars, 8" x 42" capacity

146A
US Electric Motor
200 hp, 445T Frame, 1775 rpm, Nema size 5 starter, no wire

147
Reckart Roll Case
30" x 34', 11" x 24' rolls, electric drive, switch flaps

147A
Reckart 4 Strand Transfer Deck
12'6' x 10', photo eye sensor, pop-up arms, board stops

148
Mellott Roll Case Transfer
48" x 24', 6 1/2" x 42" rolls, 12' spiral rolls, electric drive

149
Corley Drop Saw Trimmer
10 saw heads with electric motor, 24" blades, 20' board capacity, motor control box with all starters, 16' scrap conveyor, control box, 8' x 30' overall

150
Mellott 5 Strand Unscrambler
Side transfer rolls, electric drive, 1 bad bearing, 7' x 15' x 42" tall

151
Lumber 4 Strand Transfer Green Chain
10' 6' x 58', electric drive

152
Lumber Carts and Tracks
42" x 10', 9 carts, (2) 42" x 6', 30' tracks 2 per cart

153
Lumber Carts
(8) 42' x 10', steel frame and wheels

154
Lumber Carts
(4) 42" x 8', steel frame and wheels

155
Lumber Carts
(1) 45" x 76'

156
Emglo Air Compressor
Model: U10B-120, SN: 5287637, mounted on 24" x 64" tank, 10 hp electric motor. Works good

157
Emglo Air Compressor
Model: U10B-120, SN: 012687138, 10 hp electric motor, mounted on 24" x 64" tank. Works good

157A
General Empire Air Dryer
Refrigerant type, electric drive

157B
Electrical Lot
All electrical conduit, wiring, control boxes, not related to build and not lotted to equipment

158
Reckart 42" Dust Blower
14' inlet, 12" outlet, 30 hp electric motor

159
10" PVC Pipe
100'

160
Mellott Vibrating Conveyor
21' x 28", 18" pan, 4" sides, 12' screen section, electric drive

161
Belt Conveyor
18" x 21', 15' pan, 6" sides, electric drive

162
Precision Chipper
(1st of an entirety) Size: 58-15, SN: C-3450, 6 knives, no power. In good condition

163
Lincoln Electric Motor
(Part of an entirety) 125 hp, 445T frame, 1785 rpm

164
Benshaw Soft Start and Cutout Box
(Part of an entirety) Model: RBX-1-S-180A-15C, SN: XM20050216-1-1, 150 hp max, no conduit or wire

165
Precision Chip Shaker Screen
(Part of an entirety) Model: 6x6, SN: 2474, electric drive

166
Precision Chip Cyclone
(Part of an entirety) 5' cyclone, includes pipe to chipper

167
Precision Chip Blower
(Part of an entirety) 24" blower with hopper and loading chute, 20 hp electric drive

168
Support Frame for Chipper
(Part of an entirety) 86" x 14' x 38" tall

169
Precision Chipper Entirety of Lots 162-168
With 10% raise.

169A
Mellott Vibrating Conveyor
30" x 45', 24" pan, 8" sides, electric drive, chipper chute

170
2004 EFFER Knuckleboom Tie Handler
Model: 75-1S, SN: 109097, bolted to floor, extenda boom, limited rotation grapple, control valves and hoses

171
Electric Hydraulic Pak
15 hp electric motor, 44" x 26" x 16" tank, no hoses, used on lot 170

172
Mellott Roll Case Dead Rolls
(2) 28" x 6', 6 1/2" x 24" rolls, (1) 24" x 8', 3 1/2" x 20" rolls

173
North Field Uni-Point Radial Saw
Model: X36AF, 16" blade, sliding head, wood table, swivel head, electric drive

174
Pinheiro Wood Planer
Model: D630, 9" x 24" capacity, electric drive

175
Morbark Knife Grinder
Model: 48HD, SN: 971-2109, coolant pump, 48" capacity, electric drive

176
Chipper Knives and Gauges
19 1/2" knives, work table

177
56" Circular Saw Blade
B style

178
56" Circular Saw Blade
B style

179
56" Circular Saw Blade
B style

180
56" Circular Saw Blade
B style

181
56" Circular Saw Blade
B style

182
56" Circular Saw Blade
B style

183
34' Circular Saw Blade

183A
Bucksaw Chain Bar
2 new chains, 5 used chains, 1 new 58" bar 3/4" pitch, misc. bucksaw parts

184
24" Trimsaw Blades
(10) 1 5/16" pilot

185
20" Edger Blades
(11) 3 1/2" pilot

186
Jockey Grinders Saw Teeth Holders
Metal shelf 3' wide x 1' deep x 7' tall, 2 jockey grinders-DeWalt grinder, assorted new and used tooth holders

187
Workbench with Tools and Sharpener
Hammers, wrenches, screw drivers, sockets, vise, Efco chain sharpener. Workbench 13' long x 2' deep x 33" tall

188
Metal Storage Cabinet with Contents
Cabinet 31" wide x 17" deep x 38" tall, misc. bolts, roller chain, misc. electricals

189
Cantilever Racking
80" wide x 4' deep x 12' tall

190
Cantilever Racking
91" wide x 4' deep x 12' tall

191
Cantilever Racking
68" wide x 4' deep x 12' tall

192
Cantilever Racking
68" wide x 4' deep x 12' tall

193
Carriage Drive Cable
New 3/4" cable unknown length,

194
Carriage Drive Cable
Pallet with assorted length new and used 3/4" cable

195
Tool Box Gas Can Tarp
Tool box with assorted tools, misc. fluids, tarps, pick axe, draw knives

196
110 Ladder Back and Chain Deck Chain
10' new ladder back chain plus smaller piece, (3) 10' new deck chain

197
Roll Case Rolls
Pallet with misc. new and used 12 smooth rolls, (2) 7" x 24" spiral rolls

198
Chain, Binders, and Come Along
Assorted length chains, 4 binders, 2 come alongs

199
Shovels, Brooms, and Forks
Assorted hand tools

200
Hard Hats, Stihl Bars, and Chain
Used bars/chains, gas cans, bar oil, chain/bar repair tools, misc. chainsaw parts, box with hand tools

200A
Carriage and Debarker Parts
Steel debarker head, carriage axles and wheel, misc. parts on skid

201
Sprockets, Pulleys, and Carriage Wheels
Misc. pulleys, sprockets, Corley carriage wheels-2 smooth, 2 grooved

202
Roller Chains and Rooftop Chains
Assorted length hydraulic cylinders, unknown condition

203
Hydraulic Cylinders
Assorted size hydraulic cylinders, unknown condition

204
Hydraulic Cylinders
Assorted size hydraulic cylinders, unknown condition, carriage parts

205
Hydraulic Motors
Assorted size hydraulic motors, new and used, unknown condition, new motors for resaw run-around

205A
New Hydraulic Pump
Model: PZS-4B-100N3E4481A, as used on Brewco resaw run-around

206
Conveyor Belts and Valu Lacer
New and used belts, 2 rolls 18 1/2" wide, 1 roll 14" wide, 1 roll 13" wide, 1 roll 24' wide, Valu Lacer SN: 7986-V

207
Skilsaws, Drills, and Grinders
Makita and Skilsaw circular saws, wire wheels, grinding wheels, Makita drills, Makita grinder, Craftsman drill. Conditions unknown

208
Battery Chargers and Extension Cords
Assorted extension cords, solar 6V/12V charger, Exide charger, Heavy Duty 6V/12V charger. Conditions unknown

209
New Hydrostar Carriage Drive Motor
Model: H-95 TW-3, SN: 21824339

210
New Watt Saver Electric Motor
Model: C215T17FB18D, 10 hp 3 phase, 215T frame

211
Werner Step Ladders
(1) 5' ladder, (1) 8' ladder

212
Banding Tools, Box Fan, and Grease Gun
Bar/chain oil, gas jug, banding clips, banding tools, pry bars, grease guns, box fan

213
Tool Lot
3 brooms, 1 shovel, cant hook, scraper

214
Tool Lot
Broom, fork, 2 cant hooks, sledge, shovel

215
Tool Lot
2 brooms, axe, shovel, cant hook

216
Tool Lot
2 brooms, rake, scraper, shovel, cant hook

217
Tool Lot
2 shovels, broom, fork, cant hook

218
Tool Lot
2 shovels, broom, cant hook, sledge

219
Tool Lot
2 forks, broom, shovel, cant hook

220
Tool Lot
Wrenches 1/4" to 15/16", screw drivers, pipe wrench, hammers, pliers

221
Oil Barrel Hand Pump
Empty barrel with hand pump

222
1 Ton Chain Hoist
Chain hoist with barrel claw

223
Track and Trolly
Track and trolly with come along, was used to transfer saw blades, approx. 30' track with 90 degree turn

224
Propane Heaters
3 pieces, condition unknown, 40,000 BTU hanging infrared heaters

225
Hydraulic Oil Hand Pump
AW-46 hydraulic oil, unknown quantity, hand pump

226
Shelf, Cabinet, and First Aid Cabinet
3' wide x 1' deep x 7' tall shelf with contents, misc. fuses, extension cords, grease gun, encoder, 18" wide x 1" deep x 36" tall cabinet with contents

227
Werner Extension Ladder
28' ladder aluminum

228
Benchtop 8" Grinder
Takes 2-8" grinding wheels, electric drive, works

229
Benchtop Vice
5 1/2" jaws

230
Pipe Wrench Set and Safety Signs
(9) 12" to 48" pipe wrenches, road safety triangles, safety signs

231
Craftsman and Assorted Tools
1/2" and 3/4" drive ratchet wrenches, sledge hammers, sockets

232
Crescent and SK Wrenches
S-K open end wrenches, Crescent wrenches, plus others

233
S-K Wrenches and More
All tools on wall as marked, S-K box end wrenches plus others, drill bits, Crescent wrenches, pulley pullers, screw drivers, hammers

234
Jack Stands and Tools
3 Jack stands, 4 bottle jacks, sledge, socket sets, fire extinguishers, water hose. All items on shelf and floor below workbench

235
2 Hose Reels with Hose
4 wheel cart with hose and reel, wall mount hose reel

236
Fisher Metal Working Anvil
31" long

237
Shelf and Contents
5 gallon Shop-Vac sweeper with extra filters, 2 gallon sprayer, 2 rolls of tar paper, driveway markers, 56" x 55" x 16" shelf

237A
Olsen Fuel Oil Furnace
Model: BFL-145, SN: BFVL76433, fuel tank, 143,000 BTU, set up in shop

238
Grease Guns
3 pistol grip, 1 regular

239
Shop Fox Radial Drill Press
1/2 hp electric, 3 1/4" spindle travel, 600-2920 rpm, drill bits

240
Miller Matic 250 Welder
Stock # 903291, SN: KF958692, CV-DC Arc welding, power source/wire feeder, Spool Matic 30A gun, 1 spool wire ER705-3 Mig wire

241
Welding Table and Supplies
36" x 36" x 33" steel table, some tools and parts, 3 adjustable stands

242
Vise Grips, Clamps, and C-Clamps
11 C-clamps, 10 vise grip clamps, box parts

243
Cutting Torch Set and Cart
2 wheel cart, Purox torch with Victor gauges, leather coat and chaps

244
Workbench and Parts
24" x 67" plus shelf with bins, hydraulic hose fittings, Curtis bins with parts, lots of shop parts

245
Wooden Cabinet and Contents
Pop rivet tool, paint supplies, 48" x 8' x 24" 4 door cabinet and contents

246
Wooden Workbench and Cabinet
10' x 36" x 30" workbench with 4" vice, 4' x 8' x 17" 4 door cabinet and contents, chainsaw parts and paint supplies, leather chaps, snow shoes, microwave

247
Viking Hydraulic Shop Press
12 ton, 30" x 66"

248
Hurricane Pressure Washer with Swing Arm
5 hp electric motor with pump directly mounted, National Pride swing arm with wand attached, 2 spray wands, wood cabinet

249
ARO Air Pump and Sealer Spray
1/2 Barrel Anchor seal, hose and wand, air hose

250
2022 John Deere 624P Wheel Loader
SN: 1DW624PATNLT16762.
Meter reads: 691 hours.
Engine: 6068 DW504.
Fuel type: Diesel.
ROPS: Enclosed.
3rd Valve: Yes.
Center to center of pins: 16" x 30 1/2".
Lift capacity: Unknown.
Tire Size: 20.5R25.
Attachments: None.
Heater: Yes.
A/C: Yes.
Quick Attach: Yes, JRB.

Features and Notes: Like new loader. 

251
2012 John Deere 624K Wheel Loader
SN: 1DW624KZCCE643479.
Meter reads: 7,271 hours.
Engine: 6068HDW78.
Fuel type: Diesel.
ROPS: Enclosed.
3rd Valve: Yes.
Center to center of pins: 16" x 30 1/2".
Lift capacity: Unknown.
Tire Size: 20.5R25.
Attachments: Dirt Bucket.
Heater: Yes.
A/C: Yes.
Quick Attach: Yes, JRB.

Features and Notes: Good running loader.

252
2006 John Deere 344H Wheel Loader
SN: LU344HX112891.
Meter reads: 2,446 hours.
Engine: 4045TF273.
Fuel type: Diesel.
ROPS: Enclosed.
3rd Valve: No.
Center to center of pins: 16" x 30 1/2".
Lift capacity: Unknown.
Tire Size: 17.5R25.
Attachments: None.
Heater: Yes.
A/C: No.
Quick Attach: Yes, JRB.

Features and Notes: Good running loader. Articulating plus rear wheel auto steer.

253
Rockland Log Forks with Grapple
Model: LFW, SN: 236837, 64" wide, 7" x 60" forks, JRB quick attach

254
JRB Log Forks with Grapple
Model: 624G, SN: 1008-AKR6718, quick attach, 60" wide, 7" x 50" forks, 16" x 30 1/2" pin distance

255
JRB 5 Yard Dirt Bucket
Model: 624G, SN: 0794-9892B, 126" x 48" x 36"

256
Tink High-Dump Bucket
Model: R02532075, SN: 11299F, 3000 lbs. rating, 118" x 70" x 60", JRB quick attach, 16" x 30 1/2" pin distance

257
Dust Bucket
JRB quick attach, 98" x 54" x 36"

258
Loader Lumber Forks
4" x 48", 60" wide, JRB quick attach

258A
Loader Tire Chains
(3) 34" wide x approx. 10' long, like new condition

258B
Loader Tire Chains
(3) 28" wide x approx. 10' long, shows slight wear

258C
Loader Tire Chains
(2) 28" wide x approx. 10' long

258D
Loader Tire
20.5R25, useable

259
2006 Volvo L60E Wheel Loader
Year: 2006.
Make: Volvo.
Model: L60E.
Serial No: L60EV61009.
Meter reads: 7,615 hours.
Engine: 6DZXL057033.
Fuel type: Diesel.
ROPS: Enclosed cab.
3rd Valve: No.
Tire Size: 20.5R25.
Attachments: None, bucket is sold separately.
Heater: Yes.
A/C: Yes, condition unknown.
Quick Attach: Yes.
4-speed powershift transmission, 17,000 lbs lift capacity, runs and operates as it should. Lot 259A was used with this machine. Good condition!
Contact Myron Nissley with any questions 574-536-2481

259A
Bucket Attachment
Was used on Volvo L60E Wheel Loader lot 259. Contact Myron Nissley with any questions 574-333-4986

259B
Volvo Quick Attach Forks*
40" x 24" center to center of pins. Will fit lot 259. Contact Daniel Stoltzfus with any questions 717-406-9611

260
2018 Case 621F Wheel Loader
SN: NFF232463.
Meter reads: 6,634 hours.
Engine: Iveco.
Fuel type: Diesel.
ROPS: Enclosed.
3rd Valve: Yes.
Attachments: Snow Dog CM11, 11' wide.
Heater: Yes, but need work.
A/C: Yes, but need work.
Quick Attach: Yes.

Features and Notes: Runs good. Has crack in windshield. Contact Daniel Stoltzfus with any questions 717-406-9611

261
2012 John Deere 544K Wheel Loader*
SN: 1DW544KZTBD640335.
Meter reads: 18,225 hours.
Engine: John Deere Model 6068HDW74A - 6.8L.
Fuel type: Diesel.
ROPS: Enclosed.
3rd Valve: Yes.
Lift capacity: 20,784 lbs.
Tire Size: 20.5R25.
Attachments: Bucket.
Heater: Yes.
A/C: Yes.
Quick Attach: Yes.

Features and Notes: Machine was regularly serviced, runs and operates. Very Nice Machine! Contact Myron Nissley with any questions 574-536-2481

262
Fiat Allis FR20 Wheel Loader*
SN: R2A2TZ500718.
Meter reads: 23,930 hours.
Fuel type: Diesel.
ROPS: Enclosed.
3rd Valve: No.
Center to center of pins: 44" wide x 32".
Lift capacity: Unknown.
Tire Size: 26.5-25.
Attachments: 116" bucket, 48" x 48".
Heater/AC: Yes but condition is unknown.
Quick Attach: No.

Features and Notes: Has air brakes. Runs and operates. 

269
John Deere 450-B Crawler Loader
Model: 450BA, SN: 120779T, meter reads: 208 hours, engine model: 42198F0, 6" x 48" forks, steering clutch not working, runs

270
Komatsu FD40 Forklift
SN: 126257A.
Meter reads: Not available.
Engine: Komatsu.
Fuel type: Diesel.
Load capacity: 8,370 lbs. at 24" load center.
Stage mast: 2.
Mast height: 98".
Side shift: Yes.
Fork positioner: No.
ROPS: Enclosed.
Tire size: (front) 8.25-15 NHS (rear) 7.00-12 NHS.
Tires: Pneumatic.

Features and Notes: 6" x 48" forks, spread to 68" outside, dual wheels. Runs and operates. 

271
2014 Uni Carriers 65 Forklift
SN: CU1F2-9Q20761.
Meter reads: 5,328 hours.
Fuel type: LP.
Load capacity: 6,000 lbs.
Stage mast: 3.
Mast height: 91".
Side shift: Yes.
Fork positioner: No.
ROPS: Open.
Tire size: (front) 21x8x15 (rear) 16 1/4x6x11 1/4.
Tires: Solid.
 
Features and Notes: 6" wide forks. Runs good, one owner machine, lift'n'weigh LNW-5 onboard scales. Recently serviced. Has quick attach, weather covers, and window included. 

272
2006 Cat GP18 Forklift
SN: 3AM00786.
Meter reads: 4,740 hours.
Fuel type: LP, tank included.
Lift capacity: 3,500 lbs.
Load capacity: 4,000 lbs.
Stage mast: 3.
Side shift: No.
Fork positioner: No.
ROPS: Open.
Tire size: (front) 650X10 (rear) 5.00-8.
Tires: front are air, rear are solid.

Features and Notes: Runs and operates good. Just serviced. Contact Daniel Stoltzfus with any questions 717-406-9611

275
1999 John Deere 240 Skid Steer
SN: KV0240A140487.
Meter reads: 1,285 hours.
Engine: John Deere 2.9L.
Fuel type: Diesel.
ROPS: Open with grills.
2 Speed: No.
Highflow: No.
Lift capacity: Not available.
Attachments: 65" bucket, quick attach.
A/C: No.
Heater: No.

Features and Notes: Hand and foot controls, 2 remote ports. Runs and operates. 

276
Bobcat 542B Skid Steer*
SN: 508512941.
Meter reads: 4,782 hours.

Features and Notes: Does not run, in rough condition. Contact Daniel Stoltzfus with any questions 717-406-9611

278
2012 Gehl Z27 Mini Excavator
SN: YMRZ27YYACYY00508.
Meter reads: 1,695 hours.
Engine: Yanmar.
Fuel type: Diesel.
Bucket: Edge 24".
Hydraulic thumb: Yes.
ROPS: Open.

Features and Notes: Runs and operates good. Tracks have some wear. Contact Daniel Stoltzfus with any questions 717-406-9611

278A
Edge 16" Excavator Bucket
Was used on Gehl Z27. Contact Daniel Stoltzfus with any questions 717-406-9611

279
Tires and Rims
(4) 365/70R18, new wheels

280
Case International Tractor
Model: 7130, SN: AJB0042676, 16 speed, 3 pt, enclosed cab, ISO remote hydraulic parts. Runs and operates

283
2004 Tigercat 630C Dual Arch Grapple Skidder*
SN: 6302025.
Engine: Cummins. 
Meter reads: 11,217 hours.
Tire size: 35.5LR32.  
Blade size: 7' plus 2-16" extension.
Grapple: Continuous rotation.
Cable winch: No winch.
ROPS: Enclosed.
Heat: Yes.          AC: Yes.
Type of controls: Joystick

Features and Notes: Runs and operates. 

285
1995 Cat 518C Cable Skidder
SN: 1CL00356.
Engine: Cat 3304.
Engine SN: 07Z31435.
Meter reads: 11,954 hours.
Tire size: 23.1-26.

Features and Notes: Has winch (model: W411-2). Runs and operates good. Contact Daniel Stoltzfus with any questions 717-406-9611

286
2005 John Deere 748G-III Dual Arch Grapple Skidder
SN: DW748GX598066.
Meter reads: 8,990 hours.
Engine: 6081 JD.
Fuel type: Diesel.
Tires: 30.5

Features and Notes: Runs good! Contact Daniel Stoltzfus with any questions 717-406-9611

290
2000 Prentice D210E Knuckleboom
SN: 210P55233.
Meter reads: 16,063 hours.
Engine: Cummins.
Fuel type: Diesel.
Continuous Grapple: Yes.
Trailer: Yes, 1999 Pitts VIN: 1PEKB3828XP990592.
Delimber: No.
Bucksaw Hookups: Yes.
A/C: Yes but condition unknown.
Heater: Yes but condition unknown.

Features and Notes: Joystick controls, trailer is road ready. Knuckleboom runs and operates. Trailer comes with title.

291
FEC Hydro Bucksaw with Bunks
5' blade, hydraulic drive, 98" x 18' bunks

292
2012 Barko 595ML Magnum Knuckleboom
SN: 11259523803.
Meter reads: 11,610 hours.
Engine: Cummins QSB 6.7.
Fuel type: Diesel.
Continuous Grapple: Yes.
Trailer: Yes, Pitts.
Delimber: No.
Bucksaw Hookups: Yes.
A/C: Yes.
Heater: Yes.

Features and Notes: Good running everyday loader, just came out of production. Hydraulic pump has been turned up some for more power, very aggressive loader. Regularly greased, serviced and well maintained! Tight and dry machine! Road ready! Great operating condition!   Contact Myron Nissley with any questions 574-536-2481

292A
2015 Barko 595B Knuckleboom*
SN: 11659523948.
Meter reads: 4,761 hours.
Engine: Cummins Q5967173.
Fuel type: Diesel.
Continuous Grapple: Yes.
Trailer: 2015 Pitts KB48-DHL, VIN: 5JYKB4823GP162255, GVWR: 55,000 lbs.
Delimber: CSI 264 Ultra with 36" cutting bar. 
Bucksaw Hookups: Yes.
A/C: Yes.
Heater: Yes.

Features and Notes: Joystick controls, high rise cab, live heel. Has circular saw setup, cutter bar on delimber currently not being used. Good running machine. 

293
2004 Barko 495ML Knuckleboom
SN: 10423466.
Meter reads: 7,221 hours (actual hours unknown)
Engine: Cummins.
Fuel type: Diesel.
Continuous Grapple: Yes.
Trailer: Yes, Pitts.
Delimber: No.
Bucksaw Hookups: Yes.
A/C: Yes.
Heater: Yes.

Features and Notes: Good running loader, just came off the job, slight drip hydraulic leak around turn table, starter solenoid hesitates at random times, comes with extra starter, regularly greased, serviced and well maintained, road ready! Ready for production! Contact Myron Nissley with any questions 574-536-2481

294
Barko 160C Knuckleboom
SN: Unknown.
Meter reads: 8,534 hours.
Engine: Cummins.
Fuel type: Diesel.
Continuous Grapple: Yes.
Trailer: Yes.
Delimber: No.
Bucksaw Hookups: Yes.
A/C: No.
Heater: Yes, but does not work.

Features and Notes: Used as a backup loader and in yard to load firewood, installed block heater, does have some wear, trailer needs some attention before transporting long distance, regularly greased, serviced, and well maintained, runs and operates. Contact Myron Nissley with any questions 574-536-2481

294A
Bucksaw Bunks
5' x 18' bunks, 5' saw bar, hydraulic drive. Contact Daniel Stoltzfus with any questions 717-406-9611

294B
Fec Hydro Bucksaw and Bunk
Model: 1550, hydraulic drive, 66" x 18' bunks, 5' saw, bunks are in 2 pieces, works but needs new hoses

295
Mighty Giant Tub Grinder
Pto drive, 12V controls, tub is hydraulic drive, 9' diameter tub, 23" x 25' discharge belt

296
2010 Morbark RXL30 Chipharvester
SN: 2057
Meter reads: 6,864 hours.
ROPS: Enclosed.
Heat/AC: Yes.

Features and Notes: Whole tree chipper ,4 knife w/3/4'' chip size , Morlift 1000 knuckleboom w/continuous rotation grapple. Good working condition

297
Morbark 22 Total Chip Harvester*
Model: 22, SN: 2030, 4 knife, 7/8" chip size, Cat 3412 engine, 1000 hp, cab with heat and AC, Joystick controls, Saylor Beall air compressor with 11 hp Honda motor, Morlift-1000 boom with control grapple, 30" x 12' infeed web, 60" chipper. Runs and operates. 

298
1988 Cat D4H Series II Dozer*
SN: 8PB02718.
Meter reads: 5,377 hours.
Engine: 3204DI.
Fuel type: Diesel.
Blade: 104" 6 way tilt.
ROPS: Open with screen.
A/C: No.
Heater: No.

Features and Notes: High track dozer. Runs and operates.

299
1989 John Deere 550G Crawler Dozer
SN: T0550GH759045.
Meter reads: 6,839 hours.
Engine: 4 cylinder John Deere.
Fuel type: Diesel.
Blade: 102" 6 way tilt.
ROPS: Open with screen enclosure.
A/C: No.
Heater: No.

Features and Notes: Forestry package, John Deere Winch with arch, 4 speed power shift, undercarriage in fair condition, runs and operates. Contact Myron Nissley with any questions 574-536-2481

300
2005 GMC C4500 Dump Truck
VIN #: 1GDE4C1285F505845.
Mileage: 187,234.
Engine Type: Duramax.
Fuel Type: Diesel.
Transmission: Automatic.
Front axle rating: 7,000 lbs.
Rear axle rating: 13,500 lbs.
GVWR: 17,500 lbs.

Features and Notes: 2 wheel drive, cloth seats, vinyl floor, aluminum Eby dump bed 8' x 12'6", swing open gates in back, 3' sides, tool box. Has title. 

310
2015 Chevrolet Silverado 2500HD Pickup Truck
VIN #: 1GC1KVEG2FF111771.
Mileage: 64,316.
Drive Line: 4WD
Engine Type: Vortec V8.
Fuel Type: Gasoline.
Transmission: Automatic.

Features and Notes: Has 7' bed, cloth interior, vinyl floor mats. Interior looks like new. Good running truck. Has title.

320
1993 Hillsboro 200 Gooseneck Trailer
VIN: 1TH3A6GK2P1011119, model: 224-2x-BT, 14000 lbs. GVWR, 20' x 4' dovetail, loading ramps. Contact Daniel Stoltzfus with any questions 717-406-9611

325
2015 Wood-Mizer LT70 Super Hydraulic Bandmill
SN: 456D72419FNEA3024.
Meter reads: 570 hours.
Engine: Yanmar Diesel. SN: 56941.
Setworks: Yes.
Debarker: Yes.
Bed extension: Yes, outfeed table.
Log capacity: 20'2"'.
Throat capacity: 30".
Fine adjustment outriggers: Yes.
Extra wide head: No.

Features and Notes: Moveable computerized control, includes 2 bands. Runs and operates good. Contact Daniel Stoltzfus with any questions 717-406-9611

326
2023 Echo 45HD2 Bandmill
Year: 2023.
Make: Echo.
Model: 45HD-2 Production Series.
Serial No: .
Powered by: 100HP Weg Electric Motor.
Meter reads: 800 hours.
Fully Hydraulic: Yes.
Log capacity: 38" diameter x 20' long.
Throat capacity: 32".
Stationary control system: Yes.
Setworks: Touch Screen Computer Setworks.
Debarker: Yes.
Laser: Yes.

Features and Notes: 40" heavy duty band wheels, 2" blade, 28" head lift, stationary hydraulic joystick controls, VFD on electric motor, Includes: closed-center hydraulic system, power end feed on tapers, automatic board guide, power drag back, (4) squaring arms, (2) log clamps, log turner, outfeed belt, laser, all hydraulic lines self contained, 30 HP hydraulic pack with soft start. Seller upgraded to a bigger mill. One of the most Heavy Duty bandmills on the market! , LOW Hours, Excellent Condition! Contact Myron Nissley with any questions 574-536-2481

327
Poulsen Bandmill
Fully Hydraulic - Hydraulic drive on head, 3 3/4" x 36" band wheels, (10) 4 1/2" x 20'6" bands, 3 saw vertical edger driven off main motor, pantograph arms, 50" x 36' frame, 5' x 6' cab with controls, computer set. Contact Myron Nissley with any questions 574-536-2481

328
Cooks Portable Edger
SN: Unknown, meter reads: 2072 hours, (2) 14" split blades, 1 is movable, (1) 15/16" arbor, (4) 1/4" x 30" cut capacity, 37 hp Perkins diesel, 30" x 7' infeed/outfeed with speed controlled power belt, return rollers, no laser light. Road ready nice well maintained machine! Contact Daniel Stoltzfus with 717-406-9611

350
Engine Lift
Hydraulic lift, 4' arm, on casters

351
3 Ton Floor Jack and Jack Stands
19" tall Jack stands

352
Tank Carts, Sawhorses, and Spill Cleanup Kit
1 wooden frame cart, 1 steel cart

353
Anchor Seal, End Sealer, and New Barrel
End sealer for logs and lumber, 55 gallon barrel

354
AW-46 Hydraulic Fluid and Barrel with Pump
Approx. 3/4 full oil, hand crank pump, 55 gallon barrel

355
SAE 15W-40 Engine Oil and Barrel with Pump
Approx. 1/2 full oil, 55 gallon drum, hand crank pump

356
Itasca, Bar, and Chain Oil
SAE30W, 1/2 barrel oil, steel hand

357
Lincoln Air Powered Grease Pump on Barrel
Empty barrel on Dollie

358
Tire Dollie
28" x 46", hydraulic lift, on casters

359
Transmission and Hydraulic Oil
2 new 5 gallon buckets of hydraulic oil, 4 gallons of new transmission oil, plus some coolant

360
Oil Cans and Funnels

361
Pipe Threading Tools
Vice and cutters

362
Assorted Parts
New 1.5 hp electric motor, sump pump, vibrating conveyor paddles, loader step parts

363
Werner Step Ladder
8' ladder

364
File Cabinet with Parts

365
Wooden Ladder
11'6" section

366
Tire Working Tools
Hand tools, hammer, tire compressor, valve stems

367
Landscapers Spreader, Chairs, and Tree Paint
Push spreader, handheld spreader, 4 plastic chairs, 4 boxes of tree paint, trash can

368
Earthway Spreader and Grass Seed
Hand crank spreader, 2 Rubbermaid barrels with seed

369
Ice Patrol Ice Salt
(20) 50 lbs. bags

370
Shelf and Bins with Parts
New and used bearings and sprockets, lots of assorted parts

371
V-Belts and Air Hose Reel
Assorted v-belts, retractable air hose reel with hose

372
Bolt Bin with Bolts
Lots of new bolts, 36" x 42" x 12" bin with bolts, 34" x 21" x 12" bin with assorted parts, rack on wall

373
Steel Shelf and Contents
Some new steel, mounting brackets for JRB quick attach

374
Wheelbarrow, Gas Can, and Broom

375
Fuel Tank with Pump
62" x 38" tank, Fillrite pump 110V 20 gpm, has meter

376
Poly Spill Containment Box
6' x 7' x 32"

377
Tokheim Fuel Pump
Electric drive, has meter

378
Tokheim Fuel Pump
Electric drive, has meter

379
Enclosed Tote
40" x 48" x 40"

380
Enclosed Tote
40" x 48" x 40", contents unknown, metal stand

381
2013 Rheem AC Unit
Model: RJNL-A060CK, SN: 8563F381305043, Commercial series, 47" x 76" x 36"

382
Ingersoll Rand 3/4" Impact
Air operated includes some hose-works, die grinder, air hoses, blow guns

383
Series I Chipper Knife Dresser
18" fan, cords, 3/4" hose

384
Honda 2" Water Pump and Sprinkler
2 outfeed hose, 1 stand with sprinkler head

385
Filters and Parts
Chain oil, John Deere oil filters, ATF+4 transmission oil

386
Trailer Parts
Air actuators, axle with hub, safety triangles, assorted parts

387
Brewco Bandsaw Wheels
1 1/2" x 40"

388
V-Belts
Assorted new belts

389
Air Compressor Parts and Skid of Parts
Pipe fittings, air filters and regulators, aluminum screening 26" wide

390
Hoses
Some new hose, 5/8" heater hose, 1" heater hose, assorted hydraulic hoses

391
Chip Shaker Swivel Knuckles and Parts
Air valve, assorted parts

392
Steel Crates with Lumber Sticks
(6) 5' x 46" x 5' steel rack, all lumber sticks to include stack by green chain, (approx. 10,000) 3/4" x 1" x 44"

392A
Wooden Ties
6" x 6" x 8', 6" x 8" x 91, total of 60 pieces.

393
Concrete Retaining Blocks
(34) 6' x 2' x 2'

394
Concrete Retaining Blocks
(36) 6' x 2' x 2'

395
Concrete Retaining Blocks
(18) 6' x 2' x 2'

411
Metal Lockers
(1) 5 section 5' x 78" x 18" deep, (1) 6 section 6' x 78" x 18" deep

396
Concrete Retaining Blocks
(15) 6' x 2' x 2', (1) 3' x 2' x 2', a little rough condition

397
Toshiba Electric Motor
150 hp, 1770 rpm, 444T frame

398
Lincoln Electric Motor
150 hp, 1780 rpm, 444T frame

399
Pacemaker Electric Motor
75 hp, 1775 rpm, 365T frame

400
Newman Electric Motor
100 hp, 1780 rpm, 444U frame

401
Motorola 2 Way Radios
30" x 36" table-Surge protector

402
Lexmark Printer
Model: XM3150, with cart

403
Fire Proof File Cabinet
20 1/2" wide x 30" deep x 27" tall, 2 drawer

404
Shaw-walker Fire Proof File Cabinet
20 1/2" wide x 30" deep x 52" tall, 4 drawer

405
Shaw-walker Fire Proof File Cabinet
21 1/2" wide x 30" deep x 52" tall, 4 drawer

406
Office Supplies
6' folding table, 20" x 24" cart, 18" x 26" x 29" 2 drawer file cabinet, 21" x 22" storage cabinet, printer, hard drive

429
Wolverine Brush Mower

407
Office Supplies
All contents of room: Shaw, walker filing cabinet, kneehole desks, Cannon primero MF416DW, tree paint supplies, monitor, hard drive, chairs

430
Wolverine Brush Mower

408
Office Supplies
2 type writers, 4 drawer file cabinet, safety supplies, kneehole desk, tree marking paint

431
Wolverine Brush Mower

409
White's Metal Detector
Industrial UL-3, ULC-950 head, turns on, condition unknown

432
Wolverine Brush Mower

410
Tables and Supplies
2' x 6' folding tables, 12 metal folding chairs, 4 wooden folding chairs, microwave, all items on tables, gloves, time clock

412
Water Fountain
Includes RO filters and tank

434
Wolverine Sicklebar Mower

413
Electric Fridge
Frigid Air

414
Manitowoc Ice Maker
Working condition

415
Vending Machine
Working condition.

416
25' x 39' Office Building
Water heater, softener, holding tank, electrical. Building only no contents

420
Kivel Skid Steer Forks
5" x 48", good heavy forks, quick attach. Contact Daniel Stoltzfus with any questions 717-406-9611

421
Virnig Brush Grapple
36" x 7', dual grapple, 1 grapple has slight bend. Contact Daniel Stoltzfus with any questions 717-406-9611

440
New 2023 Skid Steer Wolverine Trencher
Trenching depth: 48".
Trenching width: 8".

440
New 2023 Skid Steer Wolverine Trencher
Trenching depth: 48".
Trenching width: 8".

422
New Pendu 26" Dust Blower
10" inlet, 8" outlet, 10 hp electric motor. Contact Daniel Stoltzfus with any questions 717-406-9611

423
Rooftop Deck Chain
(2) 10' C55B, (1) 10' heavy deck chain. Contact Daniel Stoltzfus with any questions 717-406-9611

442
Wolverine Cement Mixer
Model: CM-11-250V

424
1 1/4 Ton Log Hook
Contact Daniel Stoltzfus with any questions 717-406-9611

443
Wolverine Cement Mixer
Model: CM-11-250V

425
Kubota SLV90 Skid Steer Window Glass
2 pieces new glass. Contact Daniel Stoltzfus with any questions 717-406-9611

426
New 2023 Heavy Duty Paladin Concrete Saw
6.5 hp Loncin G200F engine, gross weight: 196 lbs., Dimension: 37" x 20" x 37". Contact Daniel Stoltzfus with any questions 717-406-9611

427
New 2023 Heavy Duty Paladin Plate Compactor
6.5 hp Loncin G200F engine, Gross weight: 225 lbs, dimension: 68" x 20" x 35". Contact Daniel Stoltzfus with any questions 717-406-9611

427A
New 2023 Heavy Duty Paladin Plate Compactor
6.5 hp Loncin G200F engine, Gross weight: 225 lbs, dimension: 68" x 20" x 35". Has 3" x 3" hole on back side. Contact Daniel Stoltzfus with any questions 717-406-9611

428
New 2023 Skid Steer Wolverine Brush Mower Attachment
Width: 72". Contact Daniel Stoltzfus with any questions 717-406-9611

429
New 2023 Skid Steer Wolverine Brush Mower Attachment
Width: 72". Contact Daniel Stoltzfus with any questions 717-406-9611

430
New 2023 Skid Steer Wolverine Brush Mower Attachment
Width: 72". Contact Daniel Stoltzfus with any questions 717-406-9611

431
New 2023 Skid Steer Wolverine Brush Mower Attachment
Width: 72". Contact Daniel Stoltzfus with any questions 717-406-9611

432
New 2023 Skid Steer Wolverine Brush Mower Attachment
Width: 72". Contact Daniel Stoltzfus with any questions 717-406-9611

433
New 2023 Skid Steer Wolverine Sickle Bar Mower
15 GPM-25 GPM, with in-cab controller. Contact Daniel Stoltzfus with any questions 717-406-9611

453
Wolverine Pallet Forks
Model: PFA-11-33001

454
Wolverine Pallet Forks
Model: PFA-11-33002

434
New 2023 Skid Steer Wolverine Sickle Bar Mower
15 GPM-25 GPM, with in-cab controller. Contact Daniel Stoltzfus with any questions 717-406-9611

435
New 2023 Skid Steer Wolverine Tiller
Width: 72". Contact Daniel Stoltzfus with any questions 717-406-9611

436
New 2023 Skid Steer Wolverine Tiller
Width: 72". Contact Daniel Stoltzfus with any questions 717-406-9611

437
New 2023 Skid Steer Wolverine Tiller
Width: 72". Contact Daniel Stoltzfus with any questions 717-406-9611

438
New 2023 Skid Steer Wolverine Trencher
Trenching depth: 48". Trenching width: 8". Contact Daniel Stoltzfus with any questions 717-406-9611

439
New 2023 Skid Steer Wolverine Trencher
Trenching depth: 48". Trenching width: 8". Contact Daniel Stoltzfus with any questions 717-406-9611

440
New 2023 Skid Steer Wolverine Trencher
Trenching depth: 48". Trenching width: 8". Contact Daniel Stoltzfus with any questions 717-406-9611

441
New 2023 Skid Steer Wolverine Trencher
Trenching depth: 48". Trenching width: 8". Contact Daniel Stoltzfus with any questions 717-406-9611

462
Wolverine Grapple Bucket
Model: GB-11-72W

443
New 2023 Skid Steer Wolverine Concrete Mixer
Model: CM-11-250V, capacity: 300L, with in-cab controller. Contact Daniel Stoltzfus with any questions 717-406-9611

444
New 2023 Skid Steer Wolverine Concrete Mixer
Model: CM-11-250V, capacity: 300L, with in-cab controller. Contact Daniel Stoltzfus with any questions 717-406-9611

463
Wolverine Grapple Bucket
Model: GB-11-72W

445
New 2023 Skid Steer Wolverine Concrete Mixer
Model: CM-11-250V, capacity: 300L, with in-cab controller. Contact Daniel Stoltzfus with any questions 717-406-9611

446
New 2023 Skid Steer Wolverine Fork Extensions
8', 2.5" x 5", option extension dimension: 3" x 6". Contact Daniel Stoltzfus with any questions 717-406-9611

447
New 2023 Skid Steer Wolverine Fork Extensions
8', 2.5" x 5", option extension dimension: 3" x 6". Contact Daniel Stoltzfus with any questions 717-406-9611

448
New 2023 Skid Steer Wolverine Fork Extensions
8', 2.5" x 5", option extension dimension: 3" x 6". Contact Daniel Stoltzfus with any questions 717-406-9611

449
New 2023 Skid Steer Wolverine Fork Extensions
8', 2.5" x 5", option extension dimension: 3" x 6". May have slight bend. Contact Daniel Stoltzfus with any questions 717-406-9611

450
New 2023 Skid Steer Wolverine Concrete Breaker Attachment
Model: 750. Contact Daniel Stoltzfus with any questions 717-406-9611

451
New 2023 Wolverine Pallet Fork Hydraulic Adjustable
48" long, Class II are 1 1/2" thick, 4" wide. Contact Daniel Stoltzfus with any questions 717-406-9611

452
New 2023 Wolverine Pallet Fork Hydraulic Adjustable
48" long, Class II are 1 1/2" thick, 4" wide. Contact Daniel Stoltzfus with any questions 717-406-9611

453
New 2023 Wolverine Pallet Fork Hydraulic Adjustable
48" long, Class II are 1 1/2" thick, 4" wide. Contact Daniel Stoltzfus with any questions 717-406-9611

454
New 2023 Skid Steer Wolverine 3pt Hitch Adapter
Hydraulic flow range required: 20-25 gpm, hydraulic horsepower at 18 gpm: 20-25 gpm. Contact Daniel Stoltzfus with any questions 717-406-9611

455
New 2023 Skid Steer Wolverine 3pt Hitch Adapter
Hydraulic flow range required: 20-25 gpm, hydraulic horsepower at 18 gpm: 20-25 gpm. Contact Daniel Stoltzfus with any questions 717-406-9611

474
New Paladin Water Pump
Model: P1D-TWP-80, 3" semi trash pump, gas motor

456
New 2023 Skid Steer Wolverine Boxbroom Sweeper Attachment
Sweeping width: 72". Contact Daniel Stoltzfus with any questions 717-406-9611

475
New Paladin Water Pump
Model: P1D-TWP-80, 3" semi trash pump, gas motor

457
New 2023 Skid Steer Wolverine Boxbroom Sweeper Attachment
Sweeping width: 72". Contact Daniel Stoltzfus with any questions 717-406-9611

476
New Paladin Water Pump
Model: P1D-TWP-80, 3" semi trash pump, gas motor

458
New 2023 Skid Steer Wolverine Industrial Angle Broom Attachment
With in-cab controller, sweeping width: 72", overall width: 86", brush diameter: 26", angle: hydraulic. Contact Daniel Stoltzfus with any questions 717-406-9611

459
New 2023 Skid Steer Wolverine Industrial Angle Broom Attachment
With in-cab controller, sweeping width: 72", overall width: 86", brush diameter: 26", angle: hydraulic. Contact Daniel Stoltzfus with any questions 717-406-9611

460
New 2023 Skid Steer Wolverine Grapple Bucket
Width: 72", operating weight: 511 lbs, height: 26", cylinder: 2 in Bore 6 in Stroke, overall length: 36.26". Contact Daniel Stoltzfus with any questions 717-406-9611

461
New 2023 Skid Steer Wolverine Grapple Bucket
Width: 72", operating weight: 511 lbs, height: 26", cylinder: 2 in Bore 6 in Stroke, overall length: 36.26". Contact Daniel Stoltzfus with any questions 717-406-9611

462
New 2023 Skid Steer Wolverine Grapple Bucket
Width: 72", operating weight: 511 lbs, height: 26", cylinder: 2 in Bore 6 in Stroke, overall length: 36.26". Contact Daniel Stoltzfus with any questions 717-406-9611

463
New 2023 Skid Steer Wolverine Land Leveler Attachment
Width: 78", height: 23", weight: 704 lbs, bolt on cutting edge is optional. Contact Daniel Stoltzfus with any questions 717-406-9611

464
New 2023 Skid Steer Wolverine Land Leveler Attachment
Width: 78", height: 23", weight: 704 lbs, bolt on cutting edge is optional. Contact Daniel Stoltzfus with any questions 717-406-9611

465
New 2023 Skid Steer Wolverine Ripper Attachment
Width: 60", overall length: 32.79", number of teeth: 5, ripper tooth total lenth: 18.29", ripping depth: 7-9", weight: 400 lbs. Contact Daniel Stoltzfus with any questions 717-406-9611

466
New 2023 Skid Steer Wolverine Ripper Attachment
Width: 60", overall length: 32.79", number of teeth: 5, ripper tooth total lenth: 18.29", ripping depth: 7-9", weight: 400 lbs. Contact Daniel Stoltzfus with any questions 717-406-9611

467
New 2023 Skid Steer Wolverine Vibrating Roller
Width: 60", stimulation force: 3.3T. Contact Daniel Stoltzfus with any questions 717-406-9611

468
New 2023 Skid Steer Wolverine Auger Drive & Bit Attachment
Comes with auger dimensions: 12" and 18". Effective working depth: 25". Contact Daniel Stoltzfus with any questions 717-406-9611

469
New 2023 Skid Steer Wolverine Auger Drive & Bit Attachment
Comes with auger dimensions: 12" and 18". Effective working depth: 25". Contact Daniel Stoltzfus with any questions 717-406-9611

470
New 2023 Skid Steer Wolverine Auger Drive & Bit Attachment
Comes with auger dimensions: 12" and 18". Effective working depth: 25". Contact Daniel Stoltzfus with any questions 717-406-9611

471
New 2023 Skid Steer Wolverine Auger Drive & Bit Attachment
Comes with auger dimensions: 12" and 18". Effective working depth: 25". Contact Daniel Stoltzfus with any questions 717-406-9611

471A
New 2023 Skid Steer Wolverine Auger Drive & Bit Attachment
Comes with auger dimensions: 12" and 18". Effective working depth: 25". Contact Daniel Stoltzfus with any questions 717-406-9611

471B
New 2023 Skid Steer Wolverine Auger Drive & Bit Attachment
Comes with auger dimensions: 12" and 18". Effective working depth: 25". Contact Daniel Stoltzfus with any questions 717-406-9611

472A
40' High Cube Multi-Door Container
4 open side doors, 1 end door, lock box, side forklift pockets, one way shipping. Contact Daniel Stoltzfus with any questions 717-406-9611

473
New 2023 Paladin Vibratory Rammer Jumping Jack
Model: P1D-RM90, 6.5 hp gas engine, 13" x 18" shoe. Contact Daniel Stoltzfus with any questions 717-406-9611

474
New 2023 Paladin Water Pump
Model: P1D-TWP-80, 3" semi trash pump, gas motor. Contact Daniel Stoltzfus with any questions 717-406-9611

475
New 2023 Paladin Water Pump
Model: P1D-TWP-80, 3" semi trash pump, gas motor. Contact Daniel Stoltzfus with any questions 717-406-9611

475A
New 2023 Paladin Water Pump
Model: P1D-TWP-80, 3" semi trash pump, gas motor. Contact Daniel Stoltzfus with any questions 717-406-9611

476
New 2023 Paladin Water Pump
Model: P1D-TWP-80, 3" semi trash pump, gas motor. Contact Daniel Stoltzfus with any questions 717-406-9611

476A
New 2023 Paladin Water Pump
Model: P1D-TWP-80, 3" semi trash pump, gas motor. Contact Daniel Stoltzfus with any questions 717-406-9611

477
New 2023 Paladin Water Pump
Model: P1D-TWP-80, 3" semi trash pump, gas motor. Contact Daniel Stoltzfus with any questions 717-406-9611

477A
New 2023 Paladin Water Pump
Model: P1D-TWP-80, 3" semi trash pump, gas motor

485
Crosby 3 Saw Edger
4" x 32" capacity, 1 moving saw, 2 stationary, 35" x 7' infeed, 35" x 7' outfeed, no lasers, no power. Contact Myron Nissley with any questions 574-536-2481

486
3 Strand Log Deck
10' x 12', 5' loading arms, hydraulic drive. Contact Myron Nissley with any questions 574-536-2481

487
5 Strand Transfer Deck
10' x 13', rooftop chain, slant steel decking, no drive. Contact Myron Nissley with any questions 574-536-2481

488
5 Strand Transfer Deck
12'6" x 10', steel decking, no drive. Contact Myron Nissley with any questions 574-536-2481

490
Precision Rosserhead Debarker
(1st of an entirety) Aluminum head, hydraulic drive, 14'6" outside bull wheels, 2 1/2" x 24" bull wheels, air log kick, open control station, pantograph arm. Working every day. Contact Myron Nissley with any questions 574-536-2481

491
3 Strand Log Deck with Stop'n'Load
(Part of an entirety) meter reads: 1964 hours, 10' x 14', support one end only, hydraulic drive. Contact Myron Nissley with any questions 574-536-2481

492
Perkins Power Unit with Hydraulic Pack
(Part of an entirety) SN: YD35028-U7391426, 3 hydraulic pumps, direct mounted, no clutch, 6' x 4' x 30" tank. Contact Myron Nissley with any questions 574-536-2481

493
Precision Debarker Entirety
With 10% raise.

500
Morbark 636 Debarker
Post peeler, hydraulic drive on feed rolls, 42" x 46" x 5' cab with controls, no power. Contact Myron Nissley with any questions 574-536-2481

501
2004 Perkins Power Unit
Model: 1006-6TG, control box, runs good, used on debarker. Contact Myron Nissley with any questions 574-536-2481

502
Frick Edger with Deutz Engine
28" x 4" capacity, 2 hydraulic pumps and tank, 14" inserted tooth blades, one moving blade, 45 hp engine with control box. Contact Myron Nissley with any questions 574-536-2481

503
2001 Mitsubishi Diesel Engine
11.9L 280 hp at 1800 rpm, no clutch, Murphy controls, muffler, needs rebuilt, owner has radiator. Contact Myron Nissley with any questions 574-536-2481

504
Wood-Mizer Bandsaw Pro-Series Sharpener
Model: LTPR0BN-110, SN: 05080118, set up with air motor, electric motor included, on metal work table, computer controlled. Contact Myron Nissley with any questions 574-536-2481

505
Cat-Claw Automatic Bandsaw Sharpener
Electric drive, works good. Contact Myron Nissley with any questions 574-536-2481

506
Cat Claw Dual Tooth Setter
Blade holding arms, good condition. Contact Myron Nissley with any questions 574-536-2481

507
Band Roller
Hand crank. Contact Myron Nissley with any questions 574-536-2481

509
Griggio Band Resaw
Electric power feed, 15 hp electric on saw, 3" x 29" wheels, 28" x 40" table. Works, one wire got cut in transport. Contact Daniel Stoltzfus with any questions 717-406-9611

509A
New Bandsaw Blades
(15) 17'8" x 2" x .055XT-7WM. Contact Daniel Stoltzfus with any questions 717-406-9611

510
Frick 2 Saw Edger
1 moving saw, 16" blades with inserted tooth, 40" x 9' infeed, 40" x 9' outfeed, no power, in rough condition. Contact Daniel Stoltzfus with any questions 717-406-9611

520
Horse Drawn Lift
Single stage mass, no hydraulic pump, bale lift. Contact Daniel Stoltzfus with any questions 717-406-9611

521
Slip Scoop
6' wide pan. Contact Daniel Stoltzfus with any questions 717-406-9611

522
3pt Bale Spear
Contact Daniel Stoltzfus with any questions 717-406-9611

523
5' Bucket
Used with lot 520. Contact Daniel Stoltzfus with any questions 717-406-9611

524
3pt Snow Blower
78" blower, pto drive. Contact Daniel Stoltzfus with any questions 717-406-9611

525
5 Electric Motors
(1) 10 hp 215TZ frame, (1) 20 hp 256T frame, (3) 5 hp. Contact Daniel Stoltzfus with any questions 717-406-9611

526
2 Electric Motors
(1) 20 hp 256T frame, (1) 5 hp 184T frame, with cut out boxes. Contact Daniel Stoltzfus with any questions 717-406-9611

527
Hydraulic Motors and Hydraulic Pump
Used, condition unknown. Contact Daniel Stoltzfus with any questions 717-406-9611

528
26" Pendu Blower
10" inlet, 8" outlet, 15 hp electric motor. Contact Daniel Stoltzfus with any questions 717-406-9611

529
26" Pendu Blower
10" inlet, 8" outlet, no motor. Contact Daniel Stoltzfus with any questions 717-406-9611

530
26" Pendu Blower
10" inlet, 8" outlet, 15 hp electric motor. Contact Daniel Stoltzfus with any questions 717-406-9611

531
Ingersoll Rand Air Compressor
80 gallon tank, 175 max psi electric motor. Contact Daniel Stoltzfus with any questions 717-406-9611

533
SCMI M3 Gang Rig Saw
SN: R052805, new 12" feed web, steel web feed, 4" x 20" capacity, 12" blade, 5 blade setup, top arbur, 55 hp electric motor with controls. Contact Daniel Stoltzfus with any questions 717-406-9611

534
8' Roll Case
Electric drive, in rough condition. Contact Daniel Stoltzfus with any questions 717-406-9611

535
36" Cornell Blower
18" inlet, 12" outlet, no drive. Contact Daniel Stoltzfus with any questions 717-406-9611

536
Self Dumping Hopper
5' x 5'. Contact Daniel Stoltzfus with any questions 717-406-9611

537
60" Chipper Cyclone
5' cyclone with stand. Contact Myron Nissley with any questions 574-536-2481

538
Fuel Tank with Pump
24" x 64" x 24" aluminum tank, hand pump, hose with nozzle. Contact Daniel Stoltzfus with any questions 717-406-9611

539
Skider Tire Chains
2 Bearclaw style, fits 24.5 tires. Contact Daniel Stoltzfus with any questions 717-406-9611

540
Frost Bite Skid Steer Log Grapple
28' wide grapple, hydraulic clamp. Contact Daniel Stoltzfus with any questions 717-406-9611

541
Skate Rolls
(4) 16" x 6', 2 1/2" x 12 rolls. Contact Daniel Stoltzfus with any questions 717-406-9611

542
Steel Frame Wood Box
5' x 10' x 6' tall, fork pockets, 1 side swings open. Contact Daniel Stoltzfus with any questions 717-406-9611

543
Swamp Mat
8' x 16' wooden mat, 3 layers of 1 1/2" boards. Contact Daniel Stoltzfus with any questions 717-406-9611

544
Detroit 565kw Genset
Engine model: 71657300, generator model: 680FDR8064GG-282W, 680 frame, 1800 rpm, 16V, unit was damaged in shipping. Contact Myron Nissley with any questions 574-536-2481

545
Detroit 565kw Genset
Engine Model: 71637305, Lima generator SN: A80856AL, 1800 rpm, 16V. Unit was damaged in shipping. Contact Myron Nissley with any questions 574-536-2481

545A
6V-53 Detroit Diesel Engine*
216 hp, Approx. 8 Dyno hours on complete rebuilt. Starts and runs good. Contact Daniel Stoltzfus with any questions 717-406-9611

546
Chip Blower
24" blower with hopper, 9" x 15" discharge. Contact Myron Nissley with any questions 574-536-2481

547
Grapple Attachment
7 1/2 open, 73" wide overall, pin on, 40" center to center, 1 new cylinder. Contact Daniel Stoltzfus with any questions 717-406-9611

548
Log Skidder Attachment
56" grapple, extra hoses, quick attach for skid loader. Contact Daniel Stoltzfus with any questions 717-406-9611

549
Air and Oil Filters
Pallet with misc. air/oil filters, air filters for Detroit 6V53, air filters for Cat 518. Contact Daniel Stoltzfus with any questions 717-406-9611

550
Hard Hats
7 hats. Contact Daniel Stoltzfus with any questions 717-406-9611

551
Logging Supplies
Milwaukee impact, chainsaw chaps, tool boxes with parts. Contact Daniel Stoltzfus with any questions 717-406-9611

552
Stihl Chainsaw Parts
Chain repair tools, handyman jack. Contact Daniel Stoltzfus with any questions 717-406-9611

553
Stihl MS661C Magnum
24" bar. Runs and operates. Contact Daniel Stoltzfus with any questions 717-406-9611

554
Wolverine Augers
Contact Daniel Stoltzfus with any questions 717-406-9611

555
Wolverine Augers
Contact Daniel Stoltzfus with any questions 717-406-9611

557
New Set of 4 Forerunner Tires
10-16.5 Forerunner tires. Contact Daniel Stoltzfus with any questions 717-406-9611

558
New Set of 4 Forerunner Tires
12-16.5 Forerunner tires. Contact Daniel Stoltzfus with any questions 717-406-9611

559
New 66" Root Grapple Bucket*
Contact Daniel Stoltzfus with any questions 717-406-9611

560
New 78" Kivel Large Capacity Snow/Material bucket*
Contact Daniel Stoltzfus with any questions 717-406-9611

561
New Kivel Quick Attach Plates*
Contact Daniel Stoltzfus with any questions 717-406-9611

562
New Kivel Quick Attach Plates*
Contact Daniel Stoltzfus with any questions 717-406-9611

563
New Kivel Trailer Mover Attachments*
Contact Daniel Stoltzfus with any questions 717-406-9611

564
New 84" Bucket*
Contact Daniel Stoltzfus with any questions 717-406-9611

565
New 66" Bucket*
Contact Daniel Stoltzfus with any questions 717-406-9611

566
New 60" Bucket*
Contact Daniel Stoltzfus with any questions 717-406-9611

567
New 78" Bucket*
Contact Daniel Stoltzfus with any questions 717-406-9611

568
New 72" Bucket*
Contact Daniel Stoltzfus with any questions 717-406-9611

569
New 78" Bucket*
Contact Daniel Stoltzfus with any questions 717-406-9611

570
New Kivel 48" Pallet Forks*
3500 lbs. capacity. Contact Daniel Stoltzfus with any questions 717-406-9611

571
New Kivel 48" Pallet Forks*
3500 lbs. capacity. Contact Daniel Stoltzfus with any questions 717-406-9611

572
New Kivel 48" Pallet Forks*
4200 lbs. capacity. Contact Daniel Stoltzfus with any questions 717-406-9611

573
New Kivel 48" Pallet Forks*
4200 lbs. capacity. Contact Daniel Stoltzfus with any questions 717-406-9611

574
New 2-10' Pallet Fork Extensions*
 Contact Daniel Stoltzfus with any questions 717-406-9611

575
New 2-8' Pallet Fork Extensions*
 Contact Daniel Stoltzfus with any questions 717-406-9611

577
Quick Attach Bucket*
50" wide. Contact Daniel Stoltzfus with any questions 717-406-9611

578
Cub Cadet Mower*
33" wide, 10.5 hp Briggs & Stratton engine. Engine runs but needs a new battery. Contact Daniel Stoltzfus with any questions 717-406-9611

579
Ariens Snow Blower*
5 hp gas engine. Does not run. Contact Daniel Stoltzfus with any questions 717-406-9611

580
Kemp Chipper
Model: K6CH, SN: 5930194R, new Briggs & Stratton motor. Contact Daniel Stoltzfus with any questions 717-406-9611

581
Predator Welder*
Runs, generator does not work. Contact Daniel Stoltzfus with any questions 717-406-9611

582
Welding Lead*
100' stinger section, 100' ground section. Contact Daniel Stoltzfus with any questions 717-406-9611

699
New Mini Skid Steer Track Loader
Lifting capacity: 840 lbs., 23 hp, Engine displacement/cylinders: 739/2, motor speed: 3600 rpm, max torque: 2500 rpm, cooling method: air-cooled, fuel tank capacity: 18.2 lbs., 2 of the tires do have some damage on the sidewall. Contact Myron Miller with any questions 574-536-6306

700
New Skid Steer Wolverine Disc Mulcher
Width: 72", 10" cutting capacity, 3/8" deck with reinforced sides, powered by a high torque motor and bearings. Contact Myron Miller with any questions 574-536-6306

701
New Skid Steer Wolverine 3 Blades Mower Attachment
Cutting width: 72", Overall width: 78", Length: 68". Contact Myron Miller with any questions 574-536-6306

702
New Skid Steer Wolverine 3 Blades Mower Attachment
Cutting width: 72", Overall width: 78", Length: 68". Contact Myron Miller with any questions 574-536-6306

703
New Skid Steer Wolverine 3 Blades Mower Attachment
Cutting width: 72", Overall width: 78", Length: 68". Contact Myron Miller with any questions 574-536-6306

704
New Skid Steer Wolverine 6 Way Dozer Blade Attachment
With controller, width: 84", weight: 1001 lb. Contact Myron Miller with any questions 574-536-6306

705
New Skid Steer Wolverine 6 Way Dozer Blade Attachment
With controller, width: 84", weight: 1001 lb. Contact Myron Miller with any questions 574-536-6306

706
New Skid Steer Wolverine 6 Way Dozer Blade Attachment
With controller, width: 84", weight: 1001 lb. Contact Myron Miller with any questions 574-536-6306

707
New Skid Steer Wolverine Stump Grinder Attachment
With controller, width: 45", height: 30", length: 76", below ground depth: 8", swing arc: 55°, maximum lift: 25°. Contact Myron Miller with any questions 574-536-6306

708
New Skid Steer Wolverine Stump Grinder Attachment
With controller, width: 45", height: 30", length: 76", below ground depth: 8", swing arc: 55°, maximum lift: 25°. Contact Myron Miller with any questions 574-536-6306

709
New Skid Steer Wolverine Stump Grapple Attachment
Width: 45.5", height: 30", length: 36". Contact Myron Miller with any questions 574-536-6306

710
New Skid Steer Wolverine Stump Grapple Attachment
Width: 45.5", height: 30", length: 36". Contact Myron Miller with any questions 574-536-6306

711
New Skid Steer Wolverine Rock Rake Attachment
Bucket width: 72", working width: 72", overall width: 85", overall length: 62.4", overall height: 21.5". Contact Myron Miller with any questions 574-536-6306

712
New Skid Steer Wolverine Fork Grapple Attachment
Weight with 48" forks: 425 lbs., overall width: 45.5", tine length: 48", cylinder size: 2" x 8". Contact Myron Miller with any questions 574-536-6306

713
New Skid Steer Wolverine Bale Squeeze Hydraulic Adjustable Attachment
Weight: 465 lbs., pack/unit: 55" L x 48" W x 40" H, maximum opening: 80", minimum opening: 36". Contact Myron Miller with any questions 574-536-6306

714
New Skid Steer Wolverine Bale Grapple Attachment
Width: 74", height: 30.8", depth: 40.8", bucket tines: 5, tine thickness: .4", number of grapple teeth: 3-4, space between grapple teeth: 18.4", grapple jaw opening: 60.6". Contact Myron Miller with any questions 574-536-6306

715
New Skid Steer Wolverine Tree Digger Attachment
Suitable for ball sizes 36", the tree shovel features a 3/8" plate with tapered and sharpened edges. Contact Myron Miller with any questions 574-536-6306

716
New Skid Steer Wolverine Tree Digger Attachment
Suitable for ball sizes 36", the tree shovel features a 3/8" plate with tapered and sharpened edges. Contact Myron Miller with any questions 574-536-6306

717
New Skid Steer Track Duty Bucket Attachment
Width: 66". Contact Myron Miller with any questions 574-536-6306

718
New Skid Steer Track Duty Bucket Attachment
Width: 66". Contact Myron Miller with any questions 574-536-6306

720
New Skid Steer Track Duty Bucket Attachment
Width: 72". Contact Myron Miller with any questions 574-536-6306

721
New Skid Steer Track Duty Bucket Attachment
Width: 72". Contact Myron Miller with any questions 574-536-6306

723
New Skid Steer Track Duty Bucket Attachment
Width: 78". Contact Myron Miller with any questions 574-536-6306

724
New Skid Steer Track Duty Bucket Attachment
Width: 78". Contact Myron Miller with any questions 574-536-6306

725
New Skid Steer Track Duty Bucket Attachment
Width: 84". Contact Myron Miller with any questions 574-536-6306

726
New Skid Steer Track Duty Bucket Attachment
Width: 84". Contact Myron Miller with any questions 574-536-6306

727
New Skid Steer Screening Bucket Attachment
Overall dimension: 49" x 76.6" x 31.4", bucket feeding width: 2.76", Equipment weight: 1053 lbs. Contact Myron Miller with any questions 574-536-6306

728
New Skid Steer Screening Bucket Attachment
Overall dimension: 49" x 76.6" x 31.4", bucket feeding width: 2.76", Equipment weight: 1053 lbs. Contact Myron Miller with any questions 574-536-6306

729
New Skid Steer concrete Chuter Attachment
Weight: 461 lbs., length: 38.5", length with extension: 68", width: 60", height: 30", lift capacity requirement: 3200 lbs. Contact Myron Miller with any questions 574-536-6306

730
New Skid Steer Box Broom Sweeper
Weight: 908 lbs., total width: 86", overall height: 39.3", overall length: 57.5", sweeping width: 72", brush diameter: 21.6", hydraulic motor: double direction, flow range: 15-20 gpm, bucket capacity: 91 gpm, water tank volume: 24 gpm. Contact Myron Miller with any questions 574-536-6306

731
New! 2023 Wolverine Pallet Fork Hydraulic Adjustable
48" long class II are 1 1/2" thick, 4" wide. Contact Myron Miller with any questions 574-536-6306

732
New! 2023 Wolverine Pallet Fork Hydraulic Adjustable
48" long class II are 1 1/2" thick, 4" wide. Contact Myron Miller with any questions 574-536-6306

733
New Mini Skid Steer Wolverine Pallet Fork Attachment
Overall height: 30", overall width: 30.5", overall length: 50", fork tines capacity: 2500 lbs. Contact Myron Miller with any questions 574-536-6306

734
New Mini Skid Steer Wolverine Pallet Fork Attachment
Overall height: 30", overall width: 30.5", overall length: 50", fork tines capacity: 2500 lbs. Contact Myron Miller with any questions 574-536-6306

735
New Mini Skid Steer Wolverine Pallet Fork Attachment
Overall height: 30", overall width: 30.5", overall length: 50", fork tines capacity: 2500 lbs. Contact Myron Miller with any questions 574-536-6306

736
New Mini Skid Steer Wolverine Auger Drive and Bit Attachment
Working pressure: 20.685 MPA, maximum drilling diameter 36", minimum drilling. Contact Myron Miller with any questions 574-536-6306

737
New Mini Skid Steer Wolverine Auger Drive and Bit Attachment
Working pressure: 20.685 MPA, maximum drilling diameter 36", minimum drilling. Contact Myron Miller with any questions 574-536-6306

738
New Mini Skid Steer Wolverine Auger Drive and Bit Attachment
Working pressure: 20.685 MPA, maximum drilling diameter 36", minimum drilling. Contact Myron Miller with any questions 574-536-6306

739
New Mini Skid Steer Wolverine Auger Drive and Bit Attachment
Working pressure: 20.685 MPA, maximum drilling diameter 36", minimum drilling. Contact Myron Miller with any questions 574-536-6306

740
New Mini Skid Steer Wolverine Combination Bucket Attachment
Width: 48", overall height: 18", overall length: 30". Contact Myron Miller with any questions 574-536-6306

741
New Mini Skid Steer Wolverine Combination Bucket Attachment
Width: 48", overall height: 18", overall length: 30". Contact Myron Miller with any questions 574-536-6306

742
New Mini Skid Steer Wolverine Combination Bucket Attachment
Width: 48", overall height: 18", overall length: 30". Contact Myron Miller with any questions 574-536-6306

743
New Mini Skid Steer Wolverine Hydraulic Angle Broom Attachment
With controller, width: 48", working width at 25° angle: 43.5". Contact Myron Miller with any questions 574-536-6306

744
New Mini Skid Steer Wolverine Boxbroom Sweeper Attachment
Width: 48", working width at 25° angle: 43.5", overall width: 58.5". Contact Myron Miller with any questions 574-536-6306

745
New Mini Skid Steer Wolverine Stump Grapple Attachment
Width: 44", Height: 16". Contact Myron Miller with any questions 574-536-6306

746
New Mini Skid Steer Wolverine Stump Grapple Attachment
Width: 44", Height: 16". Contact Myron Miller with any questions 574-536-6306

746A
New Mini Skid Steer Wolverine Stump Grapple Attachment
Width: 44", Height: 16". Contact Myron Miller with any questions 574-536-6306

747
New 2023 Wolverine Skid Steer Feed Bunk Sweeper
Bristle diameter: 36", bristle material: ply, 128 degree of brush head rotation, Min hydraulic pressure: 1700 psi. 

750
Crane Mats
(55) 8" x 4' x 16'. Contact Daniel Stoltzfus with any questions 717-406-9611

751
Crane Mats
(54) 8" x 4' x 16'. Contact Daniel Stoltzfus with any questions 717-406-9611

752
Crane Mats
(16) 8" x 4' x 16'. Contact Daniel Stoltzfus with any questions 717-406-9611

753
Crane Mats
(2) 12" x 4' x 20'. Contact Daniel Stoltzfus with any questions 717-406-9611

755
Crane Mats
Total of 5 pieces. 12" x 4' x 40', 10" x 4' x 40', 11 1/2" x 4' x 40', 11" x 4' x 40', 12" x 4' x 40'

756
Crane Mats
Total of 4 pieces. 11" x 4' x 26', 12" x 4' x 23'8", 11" x 4' x 27'5, 11" x 4' x 34'3"

Photo Gallery

Save Listing As Favorite

Print Listing information

Share This Listing

  • Facebook
  • Email this Listing to a Friend






Other Sales by
This Company

Jan 1
Des Arc, AR


Oct 1
Middlebury, IN



Sponsored Links

Formerly Lapp Lumber Co - Sawmill Equipment & Rolling Stock - Paradise, PA

Bright Star Realty and Auctions, INC

Bright Star Realty and Auctions, INC


Contact: Loren Beachy
Phone: 574-825-0704
Sale Location
1640 Mine RD
Paradise, PA 17562
Sale Dates and Times
Thursday Dec 14, 2023 Completed
Sale Terms and Conditions

Bidder Terms and Conditions
There is a 13% online buyer’s premium in effect for all purchases made online. Buyer’s premium is 10% for onsite bidders. All items sell where is as is with no warranties or guarantees. Buyer is responsible to inspect all merchandise prior to placing bids. Payment terms: Cash, check, wire transfer. Cash Payments totaling $10,000 or more will not be accepted. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice. Onsite buyers, payment is due the day of the auction. If onsite bidders wish to send a wire and still be assessed only the onsite buyer’s premium, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. All items are pick-up only. Smalls must be removed within 2 days. All items must be removed within 30 days unless otherwise noted. Loadout available day of auction, after that by appointment. Please call agent for more info. Buyer shall assume responsibility of all property when auctioneer says sold. Auction company is not responsible for any missing or stolen items.
These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer.
  1. Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
  2. Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded where required.
  3. Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer:
“Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction.
“Absentee Bidder” means a person or entity that submits an Absentee Bid.
“Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION.
“Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids.
“Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected.
“Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder.
“Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms.
“Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer.
"Buyer" means the Winning Bidder with respect to each Lot of Personal Property.
"Buyer's Premium" is an amount with respect to each Lot of Personal Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account.
“Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation.
“Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer.
“High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot.
“High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on the Lot put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price.
“High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot.
"Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event.
“Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer.
“No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale.
“Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions.
“Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online.
"Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered.
“Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers.
“Personal Property” means all tangible and moveable property, including fixtures, designated as Property.
“Pick-up” means the act of picking up or removing sold Lots by respective Winning Bidders at the date(s), time(s), and location indicated for such during the Auction or as later agreed to by Seller and Buyer.
“Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer).
“Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms-length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction.
“Property” means the Real Property and the Personal Property.
“Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium.
"Registered Bidder" means a person or entity that has registered to bid at the Auction.
“Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction.
“Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE.
“Reserve Price” means the minimum price that Seller is willing to accept for specific Property.
“Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer.
“Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid.
“Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by Seller).
"Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid.
“Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction.
  1. Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.

 

  1. Governing Law.
    1. For Auctions in the State of Indiana and Online. Unless otherwise indicated, all Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are deemed to be entered into in the State of Indiana, all bids and payments are deemed to be received in the State of Indiana, and the contract, if any, will be deemed to be formed and entered into in the State of Indiana.
  2. Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.
  3. Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
  4. Nature of the Auction. This Property is being sold at the Auction in the manner indicated on the first page of this Agreement.
  5. Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
  6. No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
  7. Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
    1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
    2. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
    3. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
    4. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
    5. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
    6. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
    7. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
    8. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.
 
    1. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties, (i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
    2. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
    3. No Reduction or Retraction of Online Bids. Online bids may not be reduced or retracted.
    4. Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.
    5. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.
  1. Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). All prebids and maxbids placed online are considered absentee bids. Auctioneer pledges complete integrity in the treatment of absentee bids and absentee bids may be initiated and advanced in accordance with Auctioneer’s policies and procedures. Auctioneer has the right to initiate any absentee bids at 25% to 50% of their maximum amount. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
  2. Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
  3. Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
  4. Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
  5. Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot of Personal Property will be the Buyer of such Property.
  6. All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
  7. Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
  8. Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.
  9. Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or representation by Auctioneer.
  10. Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
  11. Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
  12. Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ringman, or multiple bid assistants or ringmen, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
  13. Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
  14. All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
  15. Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked-Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
  16. Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases are due upon receipt of your invoice. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. Cash payments totaling Ten Thousand Dollars ($10,000) or more will not be accepted. If onsite bidders wish to send a wire, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.
 
  1. Wire Transfer Payments. Buyer shall obtain verbal verification of all bank account information from Bright Star Auctions prior to initiating transfer. Except as otherwise provided by law, we shall not be liable for any loss or damage due to misplaced, unauthorized or fraudulent fund transfers.
  2. ACH/eCheck Payments. By providing account information to Bright Star Auctions, buyer gives permission for Bright Star Auctions to retain payment information on file and represents they are the authorized account holder. Upon authorization to collect payment from Buyer’s account and prior to transfer, Buyer is responsible to notify their financial institution of the impending transaction. Buyer agrees to notify Bright Star Auctions of any changes in account information.
  3. Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.
  4. No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
  5. Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Tools, packing material, and/or assistance will not be supplied at Pickup, so Buyer must plan accordingly. Disassembly and removal shall be done in a quiet and workmanlike manner, and each Buyer, in making its bid, shall thereby indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer’s employees, agents, representatives, or independent contractors in connection with the Pickup. Any and all damages to the Pickup site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller. Each Buyer must show a copy of the invoice (digital or hard copy) and government-issued photo identification before Lots will be released. No Buyer shall bring pets or young children to the Pickup, as the movement of Lots presents an extremely high-risk environment that could result in injury or death.
  6. Insurance. Any work performed by Purchaser(s) or Purchaser Representative (including sub-contractors) shall be insured and provide proof of coverage against all claims for injuries against persons or damages to property which may arise from or in connection with the removal of items or equipment. Insurance coverage requirements are as follows: General Liability $1,000,000/$2,000,000 and Worker’s Compensation $1,000,000 or as required by State Law. Seller shall be listed as additionally insured, if required.
  7. Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them. In addition, Buyer’s bidding privileges may be suspended at future auctions.

  1. Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
  2. Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.
  3. Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled to specific performance or other equitable relief.
  4. Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
  5. Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
  6. Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
  7. Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
  8. Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
  9. Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim or suit relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
  10. Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their rights.

Listing Details
Lapp Lumber has been a trusted name for many years, enjoying numerous prosperous periods. Recently, when an opportunity presented itself to pursue other interests, the decision was made to sell the mill. Rest assured, the quality of this auction will impress. We offer a range of well-maintained, single-owner equipment!

00
Information Lot
Taking Consignments!
Auction agents: Eugene Hochstetler 574-242-1100 and Daniel Stoltzfus 717-406-9611
Type of auctionSawmill Liquidation and Rolling Stock
Highlight piecesWheel Loaders, Forklifts, Knucklebooms, Late Model Brewco B1600 Grade Resaw, Morbark Debarker, Precision Chip Pac, and More!

01
Preview & Inspection
Buyers are responsible to do their own inspection to determine the condition of the items they purchase. Inspections times are available as follows: Week of auction 8 to 5 or by appointment. Contact Eugene 574-242-1100

02
Loadout Information
Bright Star Auction Staff (Mose Troyer - 330-763-3780) will be on site day of auction until dark, Friday 12-15 from 8 to 4, and 12/18, 19, & 20 from 8 to 4. Yard will be closed on Saturday 12/16. After these dates you will need to contact Premier Rigging @ 260-214-1481 for an appointment.

03
Payment Information
Payment terms: 10% Onsite and 13% Online Buyer's Premium in affect for all purchases. Cash, check, wire transfer. Cash Payments totaling $10,000 or more will not be accepted. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice. Onsite buyers, payment is due the day of the auction. If onsite bidders wish to send a wire and still be assessed only the onsite buyer’s premium, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction.

 

04
CAT 390F L Hydraulic Excavator 1:50 Scale Replica - Die Cast Metal
Have fun buying a high-quality, die-cast toy! All proceeds including buyer's premium will go to Feed My Starving Children (FMSC) which is a Christian nonprofit dedicated to seeing every child and person around the world healthy, nourished and whole in body and spirit. Bright Star will pay for standard shipping and handling to the 48 contiguous states for buyers of this lot.
https://www.youtube.com/watch?v=jYATxeDmuzM&t=8s
 

90
Heavy Equipment Key Set 36 Keys
Shipping available for $20

91
Manual Sealless Steel Strapping Tool
Model A333, works for 1/2" 5/8" or 3/4" banding, new in box. Shipping available for $30

92
Stihl MS 660 Chain Saw
Good condition

93
Stihl MS 362 Chain Saw
Good condition

94
Stihl 036 Pro Chain Saw
Good condition

95
Stihl MSE 170C and MSE 140C Chain Saw
Electric, good condition

96
Stihl FS 91 Weedeater
String head, hand bar, and back sling. Good condition

97
DeWalt Cordless Tool Set
Sawzall, Lite, 2 drills, 2 batteries, carry case, impact, adapter for older style batteries

97A
Lincoln Battery Grease Gun
Extra battery and charger, carry case

97B
New Ingersoll Rand 3/4" Air Impact

99A

99A
2009 Wrens Handheld P-4000 Metal Detector
SN: 131181, battery charger, hardcase, hardware removal tools

100
2018 Morbark 640 Debarker
(1st of an entirety) In great conditon! Model: 640, SN: 1148, Weg 50 hp electric hydraulic pack, no power on head, feed rolls hydraulic driven, no hoses going to equipment

101
Weg Electric Motor
(Part of an entirety) 100 hp, 1775 rpm, 60 hz, 404/5T frame, starter box

102
Morbark Operator Cab with Controls
(Part of an entirety) 54" x 58" x 80", has heat and AC, includes control valves, insulated, hoses to equipment, and steps

103
Morbark Infeed Conveyor
(Part of an entirety) 52" x 26', 11" ladder back chain, hydraulic drive, no controls, lift cylinder on end

104
Morbark Outfeed Conveyor
(Part of an entirety) 52" x 30', 11" ladder back chain, hydraulic drive

105
2018 Morbark Debarker Entirety of Lots 100-104
With 10% raise.

106
Catwalk and Stairs
40" x 16' with rail, 48" top of platform, 2 pieces

106A
MDI Log Metal Detector
Model: TWA-2000, 56" x 48" inside opening, 5' x 8' overall, 52" x 90" mounting holes, control box. Looks to be in good condition.

106B
Fiberglass Conveyor Section
53" x 10', 26" pan, 24" sides, good condition

107
Morbark Log Trough with Kickers
62" x 32', 19" pan, 11" chain with side rakes, 6 arm kickers with hydraulic cylinder, hydraulic drive

108
Morbark Log Trough
Model: 25IN, SN: 1149, 62" x 13', hydraulic drive, infeed trough, 11" chain with side rakes

109
Barn Sweep Conveyor
42" x 72' flat section, 26' elevated, 16" paddles welded on chain, electric drive

110
Mellott 4 Strand Log Deck
stop'n'load, 18' x 26', 2 drive units with hydraulic drive, can be split for 2 decks with 2 strands

111
1980 Corley Carriage and Track
(1st of an entirety) SN 40-TD-014, 4 head block, turbo turners, on board electric hydraulic pak, Corley comp set PLC setworks controls, hydraulic setworks, air dogs, 60' track bolted on wood, 20' long, 7 axles, pantograph arm,

112
Carriage Drive and Feed
(Part of an entirety) Model: MR4-95 TW-3, hydraulic motor on cable drum, 100 hp electric motor with direct mount pump, control valve in cab, includes motor starter, 20" drum, 5/8" cable. Danfoss pump: 90R13OKA1CD80L3, C8F06GBA202020

113
Corley Husk 56" with 34" Topsaw
(Part of an entirety) 8' x 8' frame, no power, no saw, 30 hp electric on topsaw, 24" x 6' live belt

113A
Century Electric Motor
(Part of an entirety) Model: SC585-WS5U-5BU, 125 hp, 1170 rpm, manual starter, cutout box

114
Corley Cab
(Part of an entirety) 4' x 4'6" x 7', no controls, not insulated, AC unit

115
Corley Slab Drop Belt
(Part of an entirety) 36" x 12', 26" wide drop with 24" belt, electric drive

116
Corley Bar Type Turner
(Part of an entirety) 4' bar, control valve in cab, hydraulic drive

117
Corley Carriage Entirety of Lots 111-116
With 10% raise.

118
Mellott 4 Strand Log Deck
18' x 20' with 30" nose skids, stop'n'load, Tulsa gearbox with electric motor, cutout box, control switch in cab

119
Corley Edger and Gangsaw
Model: 648, SN: 76-E648-003, 6" x 48" capacity, 48" x 10' infeed rolls, no power, 2 lasers, 1 moving blade and 1 stationary for board edging, 4 stationary blades for gangsaw, 20" blades, popup side press roll, Lewis computer controls, 48" x 10' live outfeed rolls

119A
Pacemaker Electric Motor
100 hp, 405T frame, 1780 rpm

120
Live Roll Case with Pop-Up Transfer
24' x 12' roll case, 3 strand transfer 10'6" x 5', air popup cylinder, stop switch, electric drive

121
Spiral Roll Case and Side Transfer Rolls
36" x 16', 6 1/2" x 24" rolls, electric drive, 25" x 11' skate rolls, 2" x 21" rolls, 36" backstop with live press down rolls

122
Mellott Transfer Belt
26" x 10', 22" belt, no drive, elevated, adjustable legs

123
Frontline 42" Dust Blower
Model: F42ML, SN: 210515, 16" inlet, 14" outlet, 30 hp electric motor

124
Steel Dust Pipe
20' x 16", 85' x 14"-40' is new

125
Cornell Dust Blower and Pipe
26" blower, 10" inlet, 8" outlet, 30' x 8" steel pipe, 10' x 8" flex pipe, 3 hp electric motor

126
Live Roll Case
33" x 15'6", 6 1/2" x 24" rolls, stop switch, no drive

127
Live Roll Case with Board Kicker
33' x 14', 6 1/2" x 24" rolls, stop'n'kick switch, no drive

128
Live Roll Case
30" x 8', 6 1/2" x 24" rolls, electric drive

129
4 Strand Transfer Deck
12' x 10', H78 rooftop chain, steel slant decking for side loading, electric drive

130
Brewco Wolf B-1600 Resaw
(1st of an entirety) Model: B1600, SN: BEB06119, 1 3/4" x 40" solid steel band wheels, 2" bands, block guide system, 30 hp electric on head, no controls, 16" x 9' triple web feed with hydraulic drive, no support steel

131
Brewco Operator Cab with Controls
(Part of an entirety) 4' x 5', Brewco control station, full view glass, no support steel, has AC unit

132
Brewco Run Around System
(Part of an entirety) 5 way board separator, all rolls and decks for cant return and boards away, included hydraulic pak, no support steel, no controls

133
Brewco B-1600 Resaw and Run Around System Entirety of Lots 130-132
With 10% raise.

133A
Brewco E-Z Guide Dresser
6" cutting blade, electric drive.

133B
Bandsaw Blades
33 resharpened, 32 dull, 23' x 2" x .055" x 747 WM

134
Cat Walk and Support Steel under Resaw
As marked

135
28" Dust Blower
15 hp electric motor, 10" inlet, 8" outlet, steel elbow. Good condition

136
8" PVC Pipe
100'

137
Mellott Vibrating Conveyor
34" x 36' has 8" sies, one side slanted with 24" pan, 27" x 26' has 8" sides, 24" pan, screen section, steel support to ground are welded together to make 62', electric drive

138
Steel Side Pan
76" x 28', 1 1/2" x 4" C-Channel and 3/16" plate, support posts as marked

138A
Pavement Liner
12'4" wide, length unknown

139
Reckart 5 Strand Transfer Deck
14' x 18' plus 5' 6" pop-up transfer with electric drive, cant holding deck, support to ground, electric drive

140
Reckart 5 Strand Transfer Deck
Make: 08, Size: LD30, SN: 456, 14' x 11', board stop, electric drive, 1 end support to ground, 1 end first I-Beam support only

141
Roll Case with Spiral Rolls
30" x 32', 11" x 24" rolls, 16' has spiral rolls, electric drive, no support to ground

142
5 Strand Transfer Deck
15' x 6', 1' dead rolls, electric drive, no support to ground as marked

143
Reckart 4 Strand Transfer Deck with Pickup Arms
Make: 08, Size: 81X, SN 678, electric drive, air cylinder on cant pickup arms, 6'6" arms, 11' x 12' deck, board stop

144
Reckart 6 Strand Elevator
16' x 10'4" at base 10' tall, no support to ground, electric drive

145
Reckart 5 Strand Transfer Deck
Make: 06, Size: 81X, SN 676, 13' x 24', 4' slide pan on end, board stop, electric drive, no shaft or sprockets on one end

145A
Live Roll Case
28" x 30', 6 1/2" x 24" rolls, electric drive

146
Shurman Gangsaw
Model: 8-5BA-42, SN: 1364, single arbor, 13 blade setup, 26" blades, 8" x 42" capacity, 54" x 10' dead roll infeed, pop-up side press rolls, no power, 16 extra blades and collars, 8" x 42" capacity

146A
US Electric Motor
200 hp, 445T Frame, 1775 rpm, Nema size 5 starter, no wire

147
Reckart Roll Case
30" x 34', 11" x 24' rolls, electric drive, switch flaps

147A
Reckart 4 Strand Transfer Deck
12'6' x 10', photo eye sensor, pop-up arms, board stops

148
Mellott Roll Case Transfer
48" x 24', 6 1/2" x 42" rolls, 12' spiral rolls, electric drive

149
Corley Drop Saw Trimmer
10 saw heads with electric motor, 24" blades, 20' board capacity, motor control box with all starters, 16' scrap conveyor, control box, 8' x 30' overall

150
Mellott 5 Strand Unscrambler
Side transfer rolls, electric drive, 1 bad bearing, 7' x 15' x 42" tall

151
Lumber 4 Strand Transfer Green Chain
10' 6' x 58', electric drive

152
Lumber Carts and Tracks
42" x 10', 9 carts, (2) 42" x 6', 30' tracks 2 per cart

153
Lumber Carts
(8) 42' x 10', steel frame and wheels

154
Lumber Carts
(4) 42" x 8', steel frame and wheels

155
Lumber Carts
(1) 45" x 76'

156
Emglo Air Compressor
Model: U10B-120, SN: 5287637, mounted on 24" x 64" tank, 10 hp electric motor. Works good

157
Emglo Air Compressor
Model: U10B-120, SN: 012687138, 10 hp electric motor, mounted on 24" x 64" tank. Works good

157A
General Empire Air Dryer
Refrigerant type, electric drive

157B
Electrical Lot
All electrical conduit, wiring, control boxes, not related to build and not lotted to equipment

158
Reckart 42" Dust Blower
14' inlet, 12" outlet, 30 hp electric motor

159
10" PVC Pipe
100'

160
Mellott Vibrating Conveyor
21' x 28", 18" pan, 4" sides, 12' screen section, electric drive

161
Belt Conveyor
18" x 21', 15' pan, 6" sides, electric drive

162
Precision Chipper
(1st of an entirety) Size: 58-15, SN: C-3450, 6 knives, no power. In good condition

163
Lincoln Electric Motor
(Part of an entirety) 125 hp, 445T frame, 1785 rpm

164
Benshaw Soft Start and Cutout Box
(Part of an entirety) Model: RBX-1-S-180A-15C, SN: XM20050216-1-1, 150 hp max, no conduit or wire

165
Precision Chip Shaker Screen
(Part of an entirety) Model: 6x6, SN: 2474, electric drive

166
Precision Chip Cyclone
(Part of an entirety) 5' cyclone, includes pipe to chipper

167
Precision Chip Blower
(Part of an entirety) 24" blower with hopper and loading chute, 20 hp electric drive

168
Support Frame for Chipper
(Part of an entirety) 86" x 14' x 38" tall

169
Precision Chipper Entirety of Lots 162-168
With 10% raise.

169A
Mellott Vibrating Conveyor
30" x 45', 24" pan, 8" sides, electric drive, chipper chute

170
2004 EFFER Knuckleboom Tie Handler
Model: 75-1S, SN: 109097, bolted to floor, extenda boom, limited rotation grapple, control valves and hoses

171
Electric Hydraulic Pak
15 hp electric motor, 44" x 26" x 16" tank, no hoses, used on lot 170

172
Mellott Roll Case Dead Rolls
(2) 28" x 6', 6 1/2" x 24" rolls, (1) 24" x 8', 3 1/2" x 20" rolls

173
North Field Uni-Point Radial Saw
Model: X36AF, 16" blade, sliding head, wood table, swivel head, electric drive

174
Pinheiro Wood Planer
Model: D630, 9" x 24" capacity, electric drive

175
Morbark Knife Grinder
Model: 48HD, SN: 971-2109, coolant pump, 48" capacity, electric drive

176
Chipper Knives and Gauges
19 1/2" knives, work table

177
56" Circular Saw Blade
B style

178
56" Circular Saw Blade
B style

179
56" Circular Saw Blade
B style

180
56" Circular Saw Blade
B style

181
56" Circular Saw Blade
B style

182
56" Circular Saw Blade
B style

183
34' Circular Saw Blade

183A
Bucksaw Chain Bar
2 new chains, 5 used chains, 1 new 58" bar 3/4" pitch, misc. bucksaw parts

184
24" Trimsaw Blades
(10) 1 5/16" pilot

185
20" Edger Blades
(11) 3 1/2" pilot

186
Jockey Grinders Saw Teeth Holders
Metal shelf 3' wide x 1' deep x 7' tall, 2 jockey grinders-DeWalt grinder, assorted new and used tooth holders

187
Workbench with Tools and Sharpener
Hammers, wrenches, screw drivers, sockets, vise, Efco chain sharpener. Workbench 13' long x 2' deep x 33" tall

188
Metal Storage Cabinet with Contents
Cabinet 31" wide x 17" deep x 38" tall, misc. bolts, roller chain, misc. electricals

189
Cantilever Racking
80" wide x 4' deep x 12' tall

190
Cantilever Racking
91" wide x 4' deep x 12' tall

191
Cantilever Racking
68" wide x 4' deep x 12' tall

192
Cantilever Racking
68" wide x 4' deep x 12' tall

193
Carriage Drive Cable
New 3/4" cable unknown length,

194
Carriage Drive Cable
Pallet with assorted length new and used 3/4" cable

195
Tool Box Gas Can Tarp
Tool box with assorted tools, misc. fluids, tarps, pick axe, draw knives

196
110 Ladder Back and Chain Deck Chain
10' new ladder back chain plus smaller piece, (3) 10' new deck chain

197
Roll Case Rolls
Pallet with misc. new and used 12 smooth rolls, (2) 7" x 24" spiral rolls

198
Chain, Binders, and Come Along
Assorted length chains, 4 binders, 2 come alongs

199
Shovels, Brooms, and Forks
Assorted hand tools

200
Hard Hats, Stihl Bars, and Chain
Used bars/chains, gas cans, bar oil, chain/bar repair tools, misc. chainsaw parts, box with hand tools

200A
Carriage and Debarker Parts
Steel debarker head, carriage axles and wheel, misc. parts on skid

201
Sprockets, Pulleys, and Carriage Wheels
Misc. pulleys, sprockets, Corley carriage wheels-2 smooth, 2 grooved

202
Roller Chains and Rooftop Chains
Assorted length hydraulic cylinders, unknown condition

203
Hydraulic Cylinders
Assorted size hydraulic cylinders, unknown condition

204
Hydraulic Cylinders
Assorted size hydraulic cylinders, unknown condition, carriage parts

205
Hydraulic Motors
Assorted size hydraulic motors, new and used, unknown condition, new motors for resaw run-around

205A
New Hydraulic Pump
Model: PZS-4B-100N3E4481A, as used on Brewco resaw run-around

206
Conveyor Belts and Valu Lacer
New and used belts, 2 rolls 18 1/2" wide, 1 roll 14" wide, 1 roll 13" wide, 1 roll 24' wide, Valu Lacer SN: 7986-V

207
Skilsaws, Drills, and Grinders
Makita and Skilsaw circular saws, wire wheels, grinding wheels, Makita drills, Makita grinder, Craftsman drill. Conditions unknown

208
Battery Chargers and Extension Cords
Assorted extension cords, solar 6V/12V charger, Exide charger, Heavy Duty 6V/12V charger. Conditions unknown

209
New Hydrostar Carriage Drive Motor
Model: H-95 TW-3, SN: 21824339

210
New Watt Saver Electric Motor
Model: C215T17FB18D, 10 hp 3 phase, 215T frame

211
Werner Step Ladders
(1) 5' ladder, (1) 8' ladder

212
Banding Tools, Box Fan, and Grease Gun
Bar/chain oil, gas jug, banding clips, banding tools, pry bars, grease guns, box fan

213
Tool Lot
3 brooms, 1 shovel, cant hook, scraper

214
Tool Lot
Broom, fork, 2 cant hooks, sledge, shovel

215
Tool Lot
2 brooms, axe, shovel, cant hook

216
Tool Lot
2 brooms, rake, scraper, shovel, cant hook

217
Tool Lot
2 shovels, broom, fork, cant hook

218
Tool Lot
2 shovels, broom, cant hook, sledge

219
Tool Lot
2 forks, broom, shovel, cant hook

220
Tool Lot
Wrenches 1/4" to 15/16", screw drivers, pipe wrench, hammers, pliers

221
Oil Barrel Hand Pump
Empty barrel with hand pump

222
1 Ton Chain Hoist
Chain hoist with barrel claw

223
Track and Trolly
Track and trolly with come along, was used to transfer saw blades, approx. 30' track with 90 degree turn

224
Propane Heaters
3 pieces, condition unknown, 40,000 BTU hanging infrared heaters

225
Hydraulic Oil Hand Pump
AW-46 hydraulic oil, unknown quantity, hand pump

226
Shelf, Cabinet, and First Aid Cabinet
3' wide x 1' deep x 7' tall shelf with contents, misc. fuses, extension cords, grease gun, encoder, 18" wide x 1" deep x 36" tall cabinet with contents

227
Werner Extension Ladder
28' ladder aluminum

228
Benchtop 8" Grinder
Takes 2-8" grinding wheels, electric drive, works

229
Benchtop Vice
5 1/2" jaws

230
Pipe Wrench Set and Safety Signs
(9) 12" to 48" pipe wrenches, road safety triangles, safety signs

231
Craftsman and Assorted Tools
1/2" and 3/4" drive ratchet wrenches, sledge hammers, sockets

232
Crescent and SK Wrenches
S-K open end wrenches, Crescent wrenches, plus others

233
S-K Wrenches and More
All tools on wall as marked, S-K box end wrenches plus others, drill bits, Crescent wrenches, pulley pullers, screw drivers, hammers

234
Jack Stands and Tools
3 Jack stands, 4 bottle jacks, sledge, socket sets, fire extinguishers, water hose. All items on shelf and floor below workbench

235
2 Hose Reels with Hose
4 wheel cart with hose and reel, wall mount hose reel

236
Fisher Metal Working Anvil
31" long

237
Shelf and Contents
5 gallon Shop-Vac sweeper with extra filters, 2 gallon sprayer, 2 rolls of tar paper, driveway markers, 56" x 55" x 16" shelf

237A
Olsen Fuel Oil Furnace
Model: BFL-145, SN: BFVL76433, fuel tank, 143,000 BTU, set up in shop

238
Grease Guns
3 pistol grip, 1 regular

239
Shop Fox Radial Drill Press
1/2 hp electric, 3 1/4" spindle travel, 600-2920 rpm, drill bits

240
Miller Matic 250 Welder
Stock # 903291, SN: KF958692, CV-DC Arc welding, power source/wire feeder, Spool Matic 30A gun, 1 spool wire ER705-3 Mig wire

241
Welding Table and Supplies
36" x 36" x 33" steel table, some tools and parts, 3 adjustable stands

242
Vise Grips, Clamps, and C-Clamps
11 C-clamps, 10 vise grip clamps, box parts

243
Cutting Torch Set and Cart
2 wheel cart, Purox torch with Victor gauges, leather coat and chaps

244
Workbench and Parts
24" x 67" plus shelf with bins, hydraulic hose fittings, Curtis bins with parts, lots of shop parts

245
Wooden Cabinet and Contents
Pop rivet tool, paint supplies, 48" x 8' x 24" 4 door cabinet and contents

246
Wooden Workbench and Cabinet
10' x 36" x 30" workbench with 4" vice, 4' x 8' x 17" 4 door cabinet and contents, chainsaw parts and paint supplies, leather chaps, snow shoes, microwave

247
Viking Hydraulic Shop Press
12 ton, 30" x 66"

248
Hurricane Pressure Washer with Swing Arm
5 hp electric motor with pump directly mounted, National Pride swing arm with wand attached, 2 spray wands, wood cabinet

249
ARO Air Pump and Sealer Spray
1/2 Barrel Anchor seal, hose and wand, air hose

250
2022 John Deere 624P Wheel Loader
SN: 1DW624PATNLT16762.
Meter reads: 691 hours.
Engine: 6068 DW504.
Fuel type: Diesel.
ROPS: Enclosed.
3rd Valve: Yes.
Center to center of pins: 16" x 30 1/2".
Lift capacity: Unknown.
Tire Size: 20.5R25.
Attachments: None.
Heater: Yes.
A/C: Yes.
Quick Attach: Yes, JRB.

Features and Notes: Like new loader. 

251
2012 John Deere 624K Wheel Loader
SN: 1DW624KZCCE643479.
Meter reads: 7,271 hours.
Engine: 6068HDW78.
Fuel type: Diesel.
ROPS: Enclosed.
3rd Valve: Yes.
Center to center of pins: 16" x 30 1/2".
Lift capacity: Unknown.
Tire Size: 20.5R25.
Attachments: Dirt Bucket.
Heater: Yes.
A/C: Yes.
Quick Attach: Yes, JRB.

Features and Notes: Good running loader.

252
2006 John Deere 344H Wheel Loader
SN: LU344HX112891.
Meter reads: 2,446 hours.
Engine: 4045TF273.
Fuel type: Diesel.
ROPS: Enclosed.
3rd Valve: No.
Center to center of pins: 16" x 30 1/2".
Lift capacity: Unknown.
Tire Size: 17.5R25.
Attachments: None.
Heater: Yes.
A/C: No.
Quick Attach: Yes, JRB.

Features and Notes: Good running loader. Articulating plus rear wheel auto steer.

253
Rockland Log Forks with Grapple
Model: LFW, SN: 236837, 64" wide, 7" x 60" forks, JRB quick attach

254
JRB Log Forks with Grapple
Model: 624G, SN: 1008-AKR6718, quick attach, 60" wide, 7" x 50" forks, 16" x 30 1/2" pin distance

255
JRB 5 Yard Dirt Bucket
Model: 624G, SN: 0794-9892B, 126" x 48" x 36"

256
Tink High-Dump Bucket
Model: R02532075, SN: 11299F, 3000 lbs. rating, 118" x 70" x 60", JRB quick attach, 16" x 30 1/2" pin distance

257
Dust Bucket
JRB quick attach, 98" x 54" x 36"

258
Loader Lumber Forks
4" x 48", 60" wide, JRB quick attach

258A
Loader Tire Chains
(3) 34" wide x approx. 10' long, like new condition

258B
Loader Tire Chains
(3) 28" wide x approx. 10' long, shows slight wear

258C
Loader Tire Chains
(2) 28" wide x approx. 10' long

258D
Loader Tire
20.5R25, useable

259
2006 Volvo L60E Wheel Loader
Year: 2006.
Make: Volvo.
Model: L60E.
Serial No: L60EV61009.
Meter reads: 7,615 hours.
Engine: 6DZXL057033.
Fuel type: Diesel.
ROPS: Enclosed cab.
3rd Valve: No.
Tire Size: 20.5R25.
Attachments: None, bucket is sold separately.
Heater: Yes.
A/C: Yes, condition unknown.
Quick Attach: Yes.
4-speed powershift transmission, 17,000 lbs lift capacity, runs and operates as it should. Lot 259A was used with this machine. Good condition!
Contact Myron Nissley with any questions 574-536-2481

259A
Bucket Attachment
Was used on Volvo L60E Wheel Loader lot 259. Contact Myron Nissley with any questions 574-333-4986

259B
Volvo Quick Attach Forks*
40" x 24" center to center of pins. Will fit lot 259. Contact Daniel Stoltzfus with any questions 717-406-9611

260
2018 Case 621F Wheel Loader
SN: NFF232463.
Meter reads: 6,634 hours.
Engine: Iveco.
Fuel type: Diesel.
ROPS: Enclosed.
3rd Valve: Yes.
Attachments: Snow Dog CM11, 11' wide.
Heater: Yes, but need work.
A/C: Yes, but need work.
Quick Attach: Yes.

Features and Notes: Runs good. Has crack in windshield. Contact Daniel Stoltzfus with any questions 717-406-9611

261
2012 John Deere 544K Wheel Loader*
SN: 1DW544KZTBD640335.
Meter reads: 18,225 hours.
Engine: John Deere Model 6068HDW74A - 6.8L.
Fuel type: Diesel.
ROPS: Enclosed.
3rd Valve: Yes.
Lift capacity: 20,784 lbs.
Tire Size: 20.5R25.
Attachments: Bucket.
Heater: Yes.
A/C: Yes.
Quick Attach: Yes.

Features and Notes: Machine was regularly serviced, runs and operates. Very Nice Machine! Contact Myron Nissley with any questions 574-536-2481

262
Fiat Allis FR20 Wheel Loader*
SN: R2A2TZ500718.
Meter reads: 23,930 hours.
Fuel type: Diesel.
ROPS: Enclosed.
3rd Valve: No.
Center to center of pins: 44" wide x 32".
Lift capacity: Unknown.
Tire Size: 26.5-25.
Attachments: 116" bucket, 48" x 48".
Heater/AC: Yes but condition is unknown.
Quick Attach: No.

Features and Notes: Has air brakes. Runs and operates. 

269
John Deere 450-B Crawler Loader
Model: 450BA, SN: 120779T, meter reads: 208 hours, engine model: 42198F0, 6" x 48" forks, steering clutch not working, runs

270
Komatsu FD40 Forklift
SN: 126257A.
Meter reads: Not available.
Engine: Komatsu.
Fuel type: Diesel.
Load capacity: 8,370 lbs. at 24" load center.
Stage mast: 2.
Mast height: 98".
Side shift: Yes.
Fork positioner: No.
ROPS: Enclosed.
Tire size: (front) 8.25-15 NHS (rear) 7.00-12 NHS.
Tires: Pneumatic.

Features and Notes: 6" x 48" forks, spread to 68" outside, dual wheels. Runs and operates. 

271
2014 Uni Carriers 65 Forklift
SN: CU1F2-9Q20761.
Meter reads: 5,328 hours.
Fuel type: LP.
Load capacity: 6,000 lbs.
Stage mast: 3.
Mast height: 91".
Side shift: Yes.
Fork positioner: No.
ROPS: Open.
Tire size: (front) 21x8x15 (rear) 16 1/4x6x11 1/4.
Tires: Solid.
 
Features and Notes: 6" wide forks. Runs good, one owner machine, lift'n'weigh LNW-5 onboard scales. Recently serviced. Has quick attach, weather covers, and window included. 

272
2006 Cat GP18 Forklift
SN: 3AM00786.
Meter reads: 4,740 hours.
Fuel type: LP, tank included.
Lift capacity: 3,500 lbs.
Load capacity: 4,000 lbs.
Stage mast: 3.
Side shift: No.
Fork positioner: No.
ROPS: Open.
Tire size: (front) 650X10 (rear) 5.00-8.
Tires: front are air, rear are solid.

Features and Notes: Runs and operates good. Just serviced. Contact Daniel Stoltzfus with any questions 717-406-9611

275
1999 John Deere 240 Skid Steer
SN: KV0240A140487.
Meter reads: 1,285 hours.
Engine: John Deere 2.9L.
Fuel type: Diesel.
ROPS: Open with grills.
2 Speed: No.
Highflow: No.
Lift capacity: Not available.
Attachments: 65" bucket, quick attach.
A/C: No.
Heater: No.

Features and Notes: Hand and foot controls, 2 remote ports. Runs and operates. 

276
Bobcat 542B Skid Steer*
SN: 508512941.
Meter reads: 4,782 hours.

Features and Notes: Does not run, in rough condition. Contact Daniel Stoltzfus with any questions 717-406-9611

278
2012 Gehl Z27 Mini Excavator
SN: YMRZ27YYACYY00508.
Meter reads: 1,695 hours.
Engine: Yanmar.
Fuel type: Diesel.
Bucket: Edge 24".
Hydraulic thumb: Yes.
ROPS: Open.

Features and Notes: Runs and operates good. Tracks have some wear. Contact Daniel Stoltzfus with any questions 717-406-9611

278A
Edge 16" Excavator Bucket
Was used on Gehl Z27. Contact Daniel Stoltzfus with any questions 717-406-9611

279
Tires and Rims
(4) 365/70R18, new wheels

280
Case International Tractor
Model: 7130, SN: AJB0042676, 16 speed, 3 pt, enclosed cab, ISO remote hydraulic parts. Runs and operates

283
2004 Tigercat 630C Dual Arch Grapple Skidder*
SN: 6302025.
Engine: Cummins. 
Meter reads: 11,217 hours.
Tire size: 35.5LR32.  
Blade size: 7' plus 2-16" extension.
Grapple: Continuous rotation.
Cable winch: No winch.
ROPS: Enclosed.
Heat: Yes.          AC: Yes.
Type of controls: Joystick

Features and Notes: Runs and operates. 

285
1995 Cat 518C Cable Skidder
SN: 1CL00356.
Engine: Cat 3304.
Engine SN: 07Z31435.
Meter reads: 11,954 hours.
Tire size: 23.1-26.

Features and Notes: Has winch (model: W411-2). Runs and operates good. Contact Daniel Stoltzfus with any questions 717-406-9611

286
2005 John Deere 748G-III Dual Arch Grapple Skidder
SN: DW748GX598066.
Meter reads: 8,990 hours.
Engine: 6081 JD.
Fuel type: Diesel.
Tires: 30.5

Features and Notes: Runs good! Contact Daniel Stoltzfus with any questions 717-406-9611

290
2000 Prentice D210E Knuckleboom
SN: 210P55233.
Meter reads: 16,063 hours.
Engine: Cummins.
Fuel type: Diesel.
Continuous Grapple: Yes.
Trailer: Yes, 1999 Pitts VIN: 1PEKB3828XP990592.
Delimber: No.
Bucksaw Hookups: Yes.
A/C: Yes but condition unknown.
Heater: Yes but condition unknown.

Features and Notes: Joystick controls, trailer is road ready. Knuckleboom runs and operates. Trailer comes with title.

291
FEC Hydro Bucksaw with Bunks
5' blade, hydraulic drive, 98" x 18' bunks

292
2012 Barko 595ML Magnum Knuckleboom
SN: 11259523803.
Meter reads: 11,610 hours.
Engine: Cummins QSB 6.7.
Fuel type: Diesel.
Continuous Grapple: Yes.
Trailer: Yes, Pitts.
Delimber: No.
Bucksaw Hookups: Yes.
A/C: Yes.
Heater: Yes.

Features and Notes: Good running everyday loader, just came out of production. Hydraulic pump has been turned up some for more power, very aggressive loader. Regularly greased, serviced and well maintained! Tight and dry machine! Road ready! Great operating condition!   Contact Myron Nissley with any questions 574-536-2481

292A
2015 Barko 595B Knuckleboom*
SN: 11659523948.
Meter reads: 4,761 hours.
Engine: Cummins Q5967173.
Fuel type: Diesel.
Continuous Grapple: Yes.
Trailer: 2015 Pitts KB48-DHL, VIN: 5JYKB4823GP162255, GVWR: 55,000 lbs.
Delimber: CSI 264 Ultra with 36" cutting bar. 
Bucksaw Hookups: Yes.
A/C: Yes.
Heater: Yes.

Features and Notes: Joystick controls, high rise cab, live heel. Has circular saw setup, cutter bar on delimber currently not being used. Good running machine. 

293
2004 Barko 495ML Knuckleboom
SN: 10423466.
Meter reads: 7,221 hours (actual hours unknown)
Engine: Cummins.
Fuel type: Diesel.
Continuous Grapple: Yes.
Trailer: Yes, Pitts.
Delimber: No.
Bucksaw Hookups: Yes.
A/C: Yes.
Heater: Yes.

Features and Notes: Good running loader, just came off the job, slight drip hydraulic leak around turn table, starter solenoid hesitates at random times, comes with extra starter, regularly greased, serviced and well maintained, road ready! Ready for production! Contact Myron Nissley with any questions 574-536-2481

294
Barko 160C Knuckleboom
SN: Unknown.
Meter reads: 8,534 hours.
Engine: Cummins.
Fuel type: Diesel.
Continuous Grapple: Yes.
Trailer: Yes.
Delimber: No.
Bucksaw Hookups: Yes.
A/C: No.
Heater: Yes, but does not work.

Features and Notes: Used as a backup loader and in yard to load firewood, installed block heater, does have some wear, trailer needs some attention before transporting long distance, regularly greased, serviced, and well maintained, runs and operates. Contact Myron Nissley with any questions 574-536-2481

294A
Bucksaw Bunks
5' x 18' bunks, 5' saw bar, hydraulic drive. Contact Daniel Stoltzfus with any questions 717-406-9611

294B
Fec Hydro Bucksaw and Bunk
Model: 1550, hydraulic drive, 66" x 18' bunks, 5' saw, bunks are in 2 pieces, works but needs new hoses

295
Mighty Giant Tub Grinder
Pto drive, 12V controls, tub is hydraulic drive, 9' diameter tub, 23" x 25' discharge belt

296
2010 Morbark RXL30 Chipharvester
SN: 2057
Meter reads: 6,864 hours.
ROPS: Enclosed.
Heat/AC: Yes.

Features and Notes: Whole tree chipper ,4 knife w/3/4'' chip size , Morlift 1000 knuckleboom w/continuous rotation grapple. Good working condition

297
Morbark 22 Total Chip Harvester*
Model: 22, SN: 2030, 4 knife, 7/8" chip size, Cat 3412 engine, 1000 hp, cab with heat and AC, Joystick controls, Saylor Beall air compressor with 11 hp Honda motor, Morlift-1000 boom with control grapple, 30" x 12' infeed web, 60" chipper. Runs and operates. 

298
1988 Cat D4H Series II Dozer*
SN: 8PB02718.
Meter reads: 5,377 hours.
Engine: 3204DI.
Fuel type: Diesel.
Blade: 104" 6 way tilt.
ROPS: Open with screen.
A/C: No.
Heater: No.

Features and Notes: High track dozer. Runs and operates.

299
1989 John Deere 550G Crawler Dozer
SN: T0550GH759045.
Meter reads: 6,839 hours.
Engine: 4 cylinder John Deere.
Fuel type: Diesel.
Blade: 102" 6 way tilt.
ROPS: Open with screen enclosure.
A/C: No.
Heater: No.

Features and Notes: Forestry package, John Deere Winch with arch, 4 speed power shift, undercarriage in fair condition, runs and operates. Contact Myron Nissley with any questions 574-536-2481

300
2005 GMC C4500 Dump Truck
VIN #: 1GDE4C1285F505845.
Mileage: 187,234.
Engine Type: Duramax.
Fuel Type: Diesel.
Transmission: Automatic.
Front axle rating: 7,000 lbs.
Rear axle rating: 13,500 lbs.
GVWR: 17,500 lbs.

Features and Notes: 2 wheel drive, cloth seats, vinyl floor, aluminum Eby dump bed 8' x 12'6", swing open gates in back, 3' sides, tool box. Has title. 

310
2015 Chevrolet Silverado 2500HD Pickup Truck
VIN #: 1GC1KVEG2FF111771.
Mileage: 64,316.
Drive Line: 4WD
Engine Type: Vortec V8.
Fuel Type: Gasoline.
Transmission: Automatic.

Features and Notes: Has 7' bed, cloth interior, vinyl floor mats. Interior looks like new. Good running truck. Has title.

320
1993 Hillsboro 200 Gooseneck Trailer
VIN: 1TH3A6GK2P1011119, model: 224-2x-BT, 14000 lbs. GVWR, 20' x 4' dovetail, loading ramps. Contact Daniel Stoltzfus with any questions 717-406-9611

325
2015 Wood-Mizer LT70 Super Hydraulic Bandmill
SN: 456D72419FNEA3024.
Meter reads: 570 hours.
Engine: Yanmar Diesel. SN: 56941.
Setworks: Yes.
Debarker: Yes.
Bed extension: Yes, outfeed table.
Log capacity: 20'2"'.
Throat capacity: 30".
Fine adjustment outriggers: Yes.
Extra wide head: No.

Features and Notes: Moveable computerized control, includes 2 bands. Runs and operates good. Contact Daniel Stoltzfus with any questions 717-406-9611

326
2023 Echo 45HD2 Bandmill
Year: 2023.
Make: Echo.
Model: 45HD-2 Production Series.
Serial No: .
Powered by: 100HP Weg Electric Motor.
Meter reads: 800 hours.
Fully Hydraulic: Yes.
Log capacity: 38" diameter x 20' long.
Throat capacity: 32".
Stationary control system: Yes.
Setworks: Touch Screen Computer Setworks.
Debarker: Yes.
Laser: Yes.

Features and Notes: 40" heavy duty band wheels, 2" blade, 28" head lift, stationary hydraulic joystick controls, VFD on electric motor, Includes: closed-center hydraulic system, power end feed on tapers, automatic board guide, power drag back, (4) squaring arms, (2) log clamps, log turner, outfeed belt, laser, all hydraulic lines self contained, 30 HP hydraulic pack with soft start. Seller upgraded to a bigger mill. One of the most Heavy Duty bandmills on the market! , LOW Hours, Excellent Condition! Contact Myron Nissley with any questions 574-536-2481

327
Poulsen Bandmill
Fully Hydraulic - Hydraulic drive on head, 3 3/4" x 36" band wheels, (10) 4 1/2" x 20'6" bands, 3 saw vertical edger driven off main motor, pantograph arms, 50" x 36' frame, 5' x 6' cab with controls, computer set. Contact Myron Nissley with any questions 574-536-2481

328
Cooks Portable Edger
SN: Unknown, meter reads: 2072 hours, (2) 14" split blades, 1 is movable, (1) 15/16" arbor, (4) 1/4" x 30" cut capacity, 37 hp Perkins diesel, 30" x 7' infeed/outfeed with speed controlled power belt, return rollers, no laser light. Road ready nice well maintained machine! Contact Daniel Stoltzfus with 717-406-9611

350
Engine Lift
Hydraulic lift, 4' arm, on casters

351
3 Ton Floor Jack and Jack Stands
19" tall Jack stands

352
Tank Carts, Sawhorses, and Spill Cleanup Kit
1 wooden frame cart, 1 steel cart

353
Anchor Seal, End Sealer, and New Barrel
End sealer for logs and lumber, 55 gallon barrel

354
AW-46 Hydraulic Fluid and Barrel with Pump
Approx. 3/4 full oil, hand crank pump, 55 gallon barrel

355
SAE 15W-40 Engine Oil and Barrel with Pump
Approx. 1/2 full oil, 55 gallon drum, hand crank pump

356
Itasca, Bar, and Chain Oil
SAE30W, 1/2 barrel oil, steel hand

357
Lincoln Air Powered Grease Pump on Barrel
Empty barrel on Dollie

358
Tire Dollie
28" x 46", hydraulic lift, on casters

359
Transmission and Hydraulic Oil
2 new 5 gallon buckets of hydraulic oil, 4 gallons of new transmission oil, plus some coolant

360
Oil Cans and Funnels

361
Pipe Threading Tools
Vice and cutters

362
Assorted Parts
New 1.5 hp electric motor, sump pump, vibrating conveyor paddles, loader step parts

363
Werner Step Ladder
8' ladder

364
File Cabinet with Parts

365
Wooden Ladder
11'6" section

366
Tire Working Tools
Hand tools, hammer, tire compressor, valve stems

367
Landscapers Spreader, Chairs, and Tree Paint
Push spreader, handheld spreader, 4 plastic chairs, 4 boxes of tree paint, trash can

368
Earthway Spreader and Grass Seed
Hand crank spreader, 2 Rubbermaid barrels with seed

369
Ice Patrol Ice Salt
(20) 50 lbs. bags

370
Shelf and Bins with Parts
New and used bearings and sprockets, lots of assorted parts

371
V-Belts and Air Hose Reel
Assorted v-belts, retractable air hose reel with hose

372
Bolt Bin with Bolts
Lots of new bolts, 36" x 42" x 12" bin with bolts, 34" x 21" x 12" bin with assorted parts, rack on wall

373
Steel Shelf and Contents
Some new steel, mounting brackets for JRB quick attach

374
Wheelbarrow, Gas Can, and Broom

375
Fuel Tank with Pump
62" x 38" tank, Fillrite pump 110V 20 gpm, has meter

376
Poly Spill Containment Box
6' x 7' x 32"

377
Tokheim Fuel Pump
Electric drive, has meter

378
Tokheim Fuel Pump
Electric drive, has meter

379
Enclosed Tote
40" x 48" x 40"

380
Enclosed Tote
40" x 48" x 40", contents unknown, metal stand

381
2013 Rheem AC Unit
Model: RJNL-A060CK, SN: 8563F381305043, Commercial series, 47" x 76" x 36"

382
Ingersoll Rand 3/4" Impact
Air operated includes some hose-works, die grinder, air hoses, blow guns

383
Series I Chipper Knife Dresser
18" fan, cords, 3/4" hose

384
Honda 2" Water Pump and Sprinkler
2 outfeed hose, 1 stand with sprinkler head

385
Filters and Parts
Chain oil, John Deere oil filters, ATF+4 transmission oil

386
Trailer Parts
Air actuators, axle with hub, safety triangles, assorted parts

387
Brewco Bandsaw Wheels
1 1/2" x 40"

388
V-Belts
Assorted new belts

389
Air Compressor Parts and Skid of Parts
Pipe fittings, air filters and regulators, aluminum screening 26" wide

390
Hoses
Some new hose, 5/8" heater hose, 1" heater hose, assorted hydraulic hoses

391
Chip Shaker Swivel Knuckles and Parts
Air valve, assorted parts

392
Steel Crates with Lumber Sticks
(6) 5' x 46" x 5' steel rack, all lumber sticks to include stack by green chain, (approx. 10,000) 3/4" x 1" x 44"

392A
Wooden Ties
6" x 6" x 8', 6" x 8" x 91, total of 60 pieces.

393
Concrete Retaining Blocks
(34) 6' x 2' x 2'

394
Concrete Retaining Blocks
(36) 6' x 2' x 2'

395
Concrete Retaining Blocks
(18) 6' x 2' x 2'

411
Metal Lockers
(1) 5 section 5' x 78" x 18" deep, (1) 6 section 6' x 78" x 18" deep

396
Concrete Retaining Blocks
(15) 6' x 2' x 2', (1) 3' x 2' x 2', a little rough condition

397
Toshiba Electric Motor
150 hp, 1770 rpm, 444T frame

398
Lincoln Electric Motor
150 hp, 1780 rpm, 444T frame

399
Pacemaker Electric Motor
75 hp, 1775 rpm, 365T frame

400
Newman Electric Motor
100 hp, 1780 rpm, 444U frame

401
Motorola 2 Way Radios
30" x 36" table-Surge protector

402
Lexmark Printer
Model: XM3150, with cart

403
Fire Proof File Cabinet
20 1/2" wide x 30" deep x 27" tall, 2 drawer

404
Shaw-walker Fire Proof File Cabinet
20 1/2" wide x 30" deep x 52" tall, 4 drawer

405
Shaw-walker Fire Proof File Cabinet
21 1/2" wide x 30" deep x 52" tall, 4 drawer

406
Office Supplies
6' folding table, 20" x 24" cart, 18" x 26" x 29" 2 drawer file cabinet, 21" x 22" storage cabinet, printer, hard drive

429
Wolverine Brush Mower

407
Office Supplies
All contents of room: Shaw, walker filing cabinet, kneehole desks, Cannon primero MF416DW, tree paint supplies, monitor, hard drive, chairs

430
Wolverine Brush Mower

408
Office Supplies
2 type writers, 4 drawer file cabinet, safety supplies, kneehole desk, tree marking paint

431
Wolverine Brush Mower

409
White's Metal Detector
Industrial UL-3, ULC-950 head, turns on, condition unknown

432
Wolverine Brush Mower

410
Tables and Supplies
2' x 6' folding tables, 12 metal folding chairs, 4 wooden folding chairs, microwave, all items on tables, gloves, time clock

412
Water Fountain
Includes RO filters and tank

434
Wolverine Sicklebar Mower

413
Electric Fridge
Frigid Air

414
Manitowoc Ice Maker
Working condition

415
Vending Machine
Working condition.

416
25' x 39' Office Building
Water heater, softener, holding tank, electrical. Building only no contents

420
Kivel Skid Steer Forks
5" x 48", good heavy forks, quick attach. Contact Daniel Stoltzfus with any questions 717-406-9611

421
Virnig Brush Grapple
36" x 7', dual grapple, 1 grapple has slight bend. Contact Daniel Stoltzfus with any questions 717-406-9611

440
New 2023 Skid Steer Wolverine Trencher
Trenching depth: 48".
Trenching width: 8".

440
New 2023 Skid Steer Wolverine Trencher
Trenching depth: 48".
Trenching width: 8".

422
New Pendu 26" Dust Blower
10" inlet, 8" outlet, 10 hp electric motor. Contact Daniel Stoltzfus with any questions 717-406-9611

423
Rooftop Deck Chain
(2) 10' C55B, (1) 10' heavy deck chain. Contact Daniel Stoltzfus with any questions 717-406-9611

442
Wolverine Cement Mixer
Model: CM-11-250V

424
1 1/4 Ton Log Hook
Contact Daniel Stoltzfus with any questions 717-406-9611

443
Wolverine Cement Mixer
Model: CM-11-250V

425
Kubota SLV90 Skid Steer Window Glass
2 pieces new glass. Contact Daniel Stoltzfus with any questions 717-406-9611

426
New 2023 Heavy Duty Paladin Concrete Saw
6.5 hp Loncin G200F engine, gross weight: 196 lbs., Dimension: 37" x 20" x 37". Contact Daniel Stoltzfus with any questions 717-406-9611

427
New 2023 Heavy Duty Paladin Plate Compactor
6.5 hp Loncin G200F engine, Gross weight: 225 lbs, dimension: 68" x 20" x 35". Contact Daniel Stoltzfus with any questions 717-406-9611

427A
New 2023 Heavy Duty Paladin Plate Compactor
6.5 hp Loncin G200F engine, Gross weight: 225 lbs, dimension: 68" x 20" x 35". Has 3" x 3" hole on back side. Contact Daniel Stoltzfus with any questions 717-406-9611

428
New 2023 Skid Steer Wolverine Brush Mower Attachment
Width: 72". Contact Daniel Stoltzfus with any questions 717-406-9611

429
New 2023 Skid Steer Wolverine Brush Mower Attachment
Width: 72". Contact Daniel Stoltzfus with any questions 717-406-9611

430
New 2023 Skid Steer Wolverine Brush Mower Attachment
Width: 72". Contact Daniel Stoltzfus with any questions 717-406-9611

431
New 2023 Skid Steer Wolverine Brush Mower Attachment
Width: 72". Contact Daniel Stoltzfus with any questions 717-406-9611

432
New 2023 Skid Steer Wolverine Brush Mower Attachment
Width: 72". Contact Daniel Stoltzfus with any questions 717-406-9611

433
New 2023 Skid Steer Wolverine Sickle Bar Mower
15 GPM-25 GPM, with in-cab controller. Contact Daniel Stoltzfus with any questions 717-406-9611

453
Wolverine Pallet Forks
Model: PFA-11-33001

454
Wolverine Pallet Forks
Model: PFA-11-33002

434
New 2023 Skid Steer Wolverine Sickle Bar Mower
15 GPM-25 GPM, with in-cab controller. Contact Daniel Stoltzfus with any questions 717-406-9611

435
New 2023 Skid Steer Wolverine Tiller
Width: 72". Contact Daniel Stoltzfus with any questions 717-406-9611

436
New 2023 Skid Steer Wolverine Tiller
Width: 72". Contact Daniel Stoltzfus with any questions 717-406-9611

437
New 2023 Skid Steer Wolverine Tiller
Width: 72". Contact Daniel Stoltzfus with any questions 717-406-9611

438
New 2023 Skid Steer Wolverine Trencher
Trenching depth: 48". Trenching width: 8". Contact Daniel Stoltzfus with any questions 717-406-9611

439
New 2023 Skid Steer Wolverine Trencher
Trenching depth: 48". Trenching width: 8". Contact Daniel Stoltzfus with any questions 717-406-9611

440
New 2023 Skid Steer Wolverine Trencher
Trenching depth: 48". Trenching width: 8". Contact Daniel Stoltzfus with any questions 717-406-9611

441
New 2023 Skid Steer Wolverine Trencher
Trenching depth: 48". Trenching width: 8". Contact Daniel Stoltzfus with any questions 717-406-9611

462
Wolverine Grapple Bucket
Model: GB-11-72W

443
New 2023 Skid Steer Wolverine Concrete Mixer
Model: CM-11-250V, capacity: 300L, with in-cab controller. Contact Daniel Stoltzfus with any questions 717-406-9611

444
New 2023 Skid Steer Wolverine Concrete Mixer
Model: CM-11-250V, capacity: 300L, with in-cab controller. Contact Daniel Stoltzfus with any questions 717-406-9611

463
Wolverine Grapple Bucket
Model: GB-11-72W

445
New 2023 Skid Steer Wolverine Concrete Mixer
Model: CM-11-250V, capacity: 300L, with in-cab controller. Contact Daniel Stoltzfus with any questions 717-406-9611

446
New 2023 Skid Steer Wolverine Fork Extensions
8', 2.5" x 5", option extension dimension: 3" x 6". Contact Daniel Stoltzfus with any questions 717-406-9611

447
New 2023 Skid Steer Wolverine Fork Extensions
8', 2.5" x 5", option extension dimension: 3" x 6". Contact Daniel Stoltzfus with any questions 717-406-9611

448
New 2023 Skid Steer Wolverine Fork Extensions
8', 2.5" x 5", option extension dimension: 3" x 6". Contact Daniel Stoltzfus with any questions 717-406-9611

449
New 2023 Skid Steer Wolverine Fork Extensions
8', 2.5" x 5", option extension dimension: 3" x 6". May have slight bend. Contact Daniel Stoltzfus with any questions 717-406-9611

450
New 2023 Skid Steer Wolverine Concrete Breaker Attachment
Model: 750. Contact Daniel Stoltzfus with any questions 717-406-9611

451
New 2023 Wolverine Pallet Fork Hydraulic Adjustable
48" long, Class II are 1 1/2" thick, 4" wide. Contact Daniel Stoltzfus with any questions 717-406-9611

452
New 2023 Wolverine Pallet Fork Hydraulic Adjustable
48" long, Class II are 1 1/2" thick, 4" wide. Contact Daniel Stoltzfus with any questions 717-406-9611

453
New 2023 Wolverine Pallet Fork Hydraulic Adjustable
48" long, Class II are 1 1/2" thick, 4" wide. Contact Daniel Stoltzfus with any questions 717-406-9611

454
New 2023 Skid Steer Wolverine 3pt Hitch Adapter
Hydraulic flow range required: 20-25 gpm, hydraulic horsepower at 18 gpm: 20-25 gpm. Contact Daniel Stoltzfus with any questions 717-406-9611

455
New 2023 Skid Steer Wolverine 3pt Hitch Adapter
Hydraulic flow range required: 20-25 gpm, hydraulic horsepower at 18 gpm: 20-25 gpm. Contact Daniel Stoltzfus with any questions 717-406-9611

474
New Paladin Water Pump
Model: P1D-TWP-80, 3" semi trash pump, gas motor

456
New 2023 Skid Steer Wolverine Boxbroom Sweeper Attachment
Sweeping width: 72". Contact Daniel Stoltzfus with any questions 717-406-9611

475
New Paladin Water Pump
Model: P1D-TWP-80, 3" semi trash pump, gas motor

457
New 2023 Skid Steer Wolverine Boxbroom Sweeper Attachment
Sweeping width: 72". Contact Daniel Stoltzfus with any questions 717-406-9611

476
New Paladin Water Pump
Model: P1D-TWP-80, 3" semi trash pump, gas motor

458
New 2023 Skid Steer Wolverine Industrial Angle Broom Attachment
With in-cab controller, sweeping width: 72", overall width: 86", brush diameter: 26", angle: hydraulic. Contact Daniel Stoltzfus with any questions 717-406-9611

459
New 2023 Skid Steer Wolverine Industrial Angle Broom Attachment
With in-cab controller, sweeping width: 72", overall width: 86", brush diameter: 26", angle: hydraulic. Contact Daniel Stoltzfus with any questions 717-406-9611

460
New 2023 Skid Steer Wolverine Grapple Bucket
Width: 72", operating weight: 511 lbs, height: 26", cylinder: 2 in Bore 6 in Stroke, overall length: 36.26". Contact Daniel Stoltzfus with any questions 717-406-9611

461
New 2023 Skid Steer Wolverine Grapple Bucket
Width: 72", operating weight: 511 lbs, height: 26", cylinder: 2 in Bore 6 in Stroke, overall length: 36.26". Contact Daniel Stoltzfus with any questions 717-406-9611

462
New 2023 Skid Steer Wolverine Grapple Bucket
Width: 72", operating weight: 511 lbs, height: 26", cylinder: 2 in Bore 6 in Stroke, overall length: 36.26". Contact Daniel Stoltzfus with any questions 717-406-9611

463
New 2023 Skid Steer Wolverine Land Leveler Attachment
Width: 78", height: 23", weight: 704 lbs, bolt on cutting edge is optional. Contact Daniel Stoltzfus with any questions 717-406-9611

464
New 2023 Skid Steer Wolverine Land Leveler Attachment
Width: 78", height: 23", weight: 704 lbs, bolt on cutting edge is optional. Contact Daniel Stoltzfus with any questions 717-406-9611

465
New 2023 Skid Steer Wolverine Ripper Attachment
Width: 60", overall length: 32.79", number of teeth: 5, ripper tooth total lenth: 18.29", ripping depth: 7-9", weight: 400 lbs. Contact Daniel Stoltzfus with any questions 717-406-9611

466
New 2023 Skid Steer Wolverine Ripper Attachment
Width: 60", overall length: 32.79", number of teeth: 5, ripper tooth total lenth: 18.29", ripping depth: 7-9", weight: 400 lbs. Contact Daniel Stoltzfus with any questions 717-406-9611

467
New 2023 Skid Steer Wolverine Vibrating Roller
Width: 60", stimulation force: 3.3T. Contact Daniel Stoltzfus with any questions 717-406-9611

468
New 2023 Skid Steer Wolverine Auger Drive & Bit Attachment
Comes with auger dimensions: 12" and 18". Effective working depth: 25". Contact Daniel Stoltzfus with any questions 717-406-9611

469
New 2023 Skid Steer Wolverine Auger Drive & Bit Attachment
Comes with auger dimensions: 12" and 18". Effective working depth: 25". Contact Daniel Stoltzfus with any questions 717-406-9611

470
New 2023 Skid Steer Wolverine Auger Drive & Bit Attachment
Comes with auger dimensions: 12" and 18". Effective working depth: 25". Contact Daniel Stoltzfus with any questions 717-406-9611

471
New 2023 Skid Steer Wolverine Auger Drive & Bit Attachment
Comes with auger dimensions: 12" and 18". Effective working depth: 25". Contact Daniel Stoltzfus with any questions 717-406-9611

471A
New 2023 Skid Steer Wolverine Auger Drive & Bit Attachment
Comes with auger dimensions: 12" and 18". Effective working depth: 25". Contact Daniel Stoltzfus with any questions 717-406-9611

471B
New 2023 Skid Steer Wolverine Auger Drive & Bit Attachment
Comes with auger dimensions: 12" and 18". Effective working depth: 25". Contact Daniel Stoltzfus with any questions 717-406-9611

472A
40' High Cube Multi-Door Container
4 open side doors, 1 end door, lock box, side forklift pockets, one way shipping. Contact Daniel Stoltzfus with any questions 717-406-9611

473
New 2023 Paladin Vibratory Rammer Jumping Jack
Model: P1D-RM90, 6.5 hp gas engine, 13" x 18" shoe. Contact Daniel Stoltzfus with any questions 717-406-9611

474
New 2023 Paladin Water Pump
Model: P1D-TWP-80, 3" semi trash pump, gas motor. Contact Daniel Stoltzfus with any questions 717-406-9611

475
New 2023 Paladin Water Pump
Model: P1D-TWP-80, 3" semi trash pump, gas motor. Contact Daniel Stoltzfus with any questions 717-406-9611

475A
New 2023 Paladin Water Pump
Model: P1D-TWP-80, 3" semi trash pump, gas motor. Contact Daniel Stoltzfus with any questions 717-406-9611

476
New 2023 Paladin Water Pump
Model: P1D-TWP-80, 3" semi trash pump, gas motor. Contact Daniel Stoltzfus with any questions 717-406-9611

476A
New 2023 Paladin Water Pump
Model: P1D-TWP-80, 3" semi trash pump, gas motor. Contact Daniel Stoltzfus with any questions 717-406-9611

477
New 2023 Paladin Water Pump
Model: P1D-TWP-80, 3" semi trash pump, gas motor. Contact Daniel Stoltzfus with any questions 717-406-9611

477A
New 2023 Paladin Water Pump
Model: P1D-TWP-80, 3" semi trash pump, gas motor

485
Crosby 3 Saw Edger
4" x 32" capacity, 1 moving saw, 2 stationary, 35" x 7' infeed, 35" x 7' outfeed, no lasers, no power. Contact Myron Nissley with any questions 574-536-2481

486
3 Strand Log Deck
10' x 12', 5' loading arms, hydraulic drive. Contact Myron Nissley with any questions 574-536-2481

487
5 Strand Transfer Deck
10' x 13', rooftop chain, slant steel decking, no drive. Contact Myron Nissley with any questions 574-536-2481

488
5 Strand Transfer Deck
12'6" x 10', steel decking, no drive. Contact Myron Nissley with any questions 574-536-2481

490
Precision Rosserhead Debarker
(1st of an entirety) Aluminum head, hydraulic drive, 14'6" outside bull wheels, 2 1/2" x 24" bull wheels, air log kick, open control station, pantograph arm. Working every day. Contact Myron Nissley with any questions 574-536-2481

491
3 Strand Log Deck with Stop'n'Load
(Part of an entirety) meter reads: 1964 hours, 10' x 14', support one end only, hydraulic drive. Contact Myron Nissley with any questions 574-536-2481

492
Perkins Power Unit with Hydraulic Pack
(Part of an entirety) SN: YD35028-U7391426, 3 hydraulic pumps, direct mounted, no clutch, 6' x 4' x 30" tank. Contact Myron Nissley with any questions 574-536-2481

493
Precision Debarker Entirety
With 10% raise.

500
Morbark 636 Debarker
Post peeler, hydraulic drive on feed rolls, 42" x 46" x 5' cab with controls, no power. Contact Myron Nissley with any questions 574-536-2481

501
2004 Perkins Power Unit
Model: 1006-6TG, control box, runs good, used on debarker. Contact Myron Nissley with any questions 574-536-2481

502
Frick Edger with Deutz Engine
28" x 4" capacity, 2 hydraulic pumps and tank, 14" inserted tooth blades, one moving blade, 45 hp engine with control box. Contact Myron Nissley with any questions 574-536-2481

503
2001 Mitsubishi Diesel Engine
11.9L 280 hp at 1800 rpm, no clutch, Murphy controls, muffler, needs rebuilt, owner has radiator. Contact Myron Nissley with any questions 574-536-2481

504
Wood-Mizer Bandsaw Pro-Series Sharpener
Model: LTPR0BN-110, SN: 05080118, set up with air motor, electric motor included, on metal work table, computer controlled. Contact Myron Nissley with any questions 574-536-2481

505
Cat-Claw Automatic Bandsaw Sharpener
Electric drive, works good. Contact Myron Nissley with any questions 574-536-2481

506
Cat Claw Dual Tooth Setter
Blade holding arms, good condition. Contact Myron Nissley with any questions 574-536-2481

507
Band Roller
Hand crank. Contact Myron Nissley with any questions 574-536-2481

509
Griggio Band Resaw
Electric power feed, 15 hp electric on saw, 3" x 29" wheels, 28" x 40" table. Works, one wire got cut in transport. Contact Daniel Stoltzfus with any questions 717-406-9611

509A
New Bandsaw Blades
(15) 17'8" x 2" x .055XT-7WM. Contact Daniel Stoltzfus with any questions 717-406-9611

510
Frick 2 Saw Edger
1 moving saw, 16" blades with inserted tooth, 40" x 9' infeed, 40" x 9' outfeed, no power, in rough condition. Contact Daniel Stoltzfus with any questions 717-406-9611

520
Horse Drawn Lift
Single stage mass, no hydraulic pump, bale lift. Contact Daniel Stoltzfus with any questions 717-406-9611

521
Slip Scoop
6' wide pan. Contact Daniel Stoltzfus with any questions 717-406-9611

522
3pt Bale Spear
Contact Daniel Stoltzfus with any questions 717-406-9611

523
5' Bucket
Used with lot 520. Contact Daniel Stoltzfus with any questions 717-406-9611

524
3pt Snow Blower
78" blower, pto drive. Contact Daniel Stoltzfus with any questions 717-406-9611

525
5 Electric Motors
(1) 10 hp 215TZ frame, (1) 20 hp 256T frame, (3) 5 hp. Contact Daniel Stoltzfus with any questions 717-406-9611

526
2 Electric Motors
(1) 20 hp 256T frame, (1) 5 hp 184T frame, with cut out boxes. Contact Daniel Stoltzfus with any questions 717-406-9611

527
Hydraulic Motors and Hydraulic Pump
Used, condition unknown. Contact Daniel Stoltzfus with any questions 717-406-9611

528
26" Pendu Blower
10" inlet, 8" outlet, 15 hp electric motor. Contact Daniel Stoltzfus with any questions 717-406-9611

529
26" Pendu Blower
10" inlet, 8" outlet, no motor. Contact Daniel Stoltzfus with any questions 717-406-9611

530
26" Pendu Blower
10" inlet, 8" outlet, 15 hp electric motor. Contact Daniel Stoltzfus with any questions 717-406-9611

531
Ingersoll Rand Air Compressor
80 gallon tank, 175 max psi electric motor. Contact Daniel Stoltzfus with any questions 717-406-9611

533
SCMI M3 Gang Rig Saw
SN: R052805, new 12" feed web, steel web feed, 4" x 20" capacity, 12" blade, 5 blade setup, top arbur, 55 hp electric motor with controls. Contact Daniel Stoltzfus with any questions 717-406-9611

534
8' Roll Case
Electric drive, in rough condition. Contact Daniel Stoltzfus with any questions 717-406-9611

535
36" Cornell Blower
18" inlet, 12" outlet, no drive. Contact Daniel Stoltzfus with any questions 717-406-9611

536
Self Dumping Hopper
5' x 5'. Contact Daniel Stoltzfus with any questions 717-406-9611

537
60" Chipper Cyclone
5' cyclone with stand. Contact Myron Nissley with any questions 574-536-2481

538
Fuel Tank with Pump
24" x 64" x 24" aluminum tank, hand pump, hose with nozzle. Contact Daniel Stoltzfus with any questions 717-406-9611

539
Skider Tire Chains
2 Bearclaw style, fits 24.5 tires. Contact Daniel Stoltzfus with any questions 717-406-9611

540
Frost Bite Skid Steer Log Grapple
28' wide grapple, hydraulic clamp. Contact Daniel Stoltzfus with any questions 717-406-9611

541
Skate Rolls
(4) 16" x 6', 2 1/2" x 12 rolls. Contact Daniel Stoltzfus with any questions 717-406-9611

542
Steel Frame Wood Box
5' x 10' x 6' tall, fork pockets, 1 side swings open. Contact Daniel Stoltzfus with any questions 717-406-9611

543
Swamp Mat
8' x 16' wooden mat, 3 layers of 1 1/2" boards. Contact Daniel Stoltzfus with any questions 717-406-9611

544
Detroit 565kw Genset
Engine model: 71657300, generator model: 680FDR8064GG-282W, 680 frame, 1800 rpm, 16V, unit was damaged in shipping. Contact Myron Nissley with any questions 574-536-2481

545
Detroit 565kw Genset
Engine Model: 71637305, Lima generator SN: A80856AL, 1800 rpm, 16V. Unit was damaged in shipping. Contact Myron Nissley with any questions 574-536-2481

545A
6V-53 Detroit Diesel Engine*
216 hp, Approx. 8 Dyno hours on complete rebuilt. Starts and runs good. Contact Daniel Stoltzfus with any questions 717-406-9611

546
Chip Blower
24" blower with hopper, 9" x 15" discharge. Contact Myron Nissley with any questions 574-536-2481

547
Grapple Attachment
7 1/2 open, 73" wide overall, pin on, 40" center to center, 1 new cylinder. Contact Daniel Stoltzfus with any questions 717-406-9611

548
Log Skidder Attachment
56" grapple, extra hoses, quick attach for skid loader. Contact Daniel Stoltzfus with any questions 717-406-9611

549
Air and Oil Filters
Pallet with misc. air/oil filters, air filters for Detroit 6V53, air filters for Cat 518. Contact Daniel Stoltzfus with any questions 717-406-9611

550
Hard Hats
7 hats. Contact Daniel Stoltzfus with any questions 717-406-9611

551
Logging Supplies
Milwaukee impact, chainsaw chaps, tool boxes with parts. Contact Daniel Stoltzfus with any questions 717-406-9611

552
Stihl Chainsaw Parts
Chain repair tools, handyman jack. Contact Daniel Stoltzfus with any questions 717-406-9611

553
Stihl MS661C Magnum
24" bar. Runs and operates. Contact Daniel Stoltzfus with any questions 717-406-9611

554
Wolverine Augers
Contact Daniel Stoltzfus with any questions 717-406-9611

555
Wolverine Augers
Contact Daniel Stoltzfus with any questions 717-406-9611

557
New Set of 4 Forerunner Tires
10-16.5 Forerunner tires. Contact Daniel Stoltzfus with any questions 717-406-9611

558
New Set of 4 Forerunner Tires
12-16.5 Forerunner tires. Contact Daniel Stoltzfus with any questions 717-406-9611

559
New 66" Root Grapple Bucket*
Contact Daniel Stoltzfus with any questions 717-406-9611

560
New 78" Kivel Large Capacity Snow/Material bucket*
Contact Daniel Stoltzfus with any questions 717-406-9611

561
New Kivel Quick Attach Plates*
Contact Daniel Stoltzfus with any questions 717-406-9611

562
New Kivel Quick Attach Plates*
Contact Daniel Stoltzfus with any questions 717-406-9611

563
New Kivel Trailer Mover Attachments*
Contact Daniel Stoltzfus with any questions 717-406-9611

564
New 84" Bucket*
Contact Daniel Stoltzfus with any questions 717-406-9611

565
New 66" Bucket*
Contact Daniel Stoltzfus with any questions 717-406-9611

566
New 60" Bucket*
Contact Daniel Stoltzfus with any questions 717-406-9611

567
New 78" Bucket*
Contact Daniel Stoltzfus with any questions 717-406-9611

568
New 72" Bucket*
Contact Daniel Stoltzfus with any questions 717-406-9611

569
New 78" Bucket*
Contact Daniel Stoltzfus with any questions 717-406-9611

570
New Kivel 48" Pallet Forks*
3500 lbs. capacity. Contact Daniel Stoltzfus with any questions 717-406-9611

571
New Kivel 48" Pallet Forks*
3500 lbs. capacity. Contact Daniel Stoltzfus with any questions 717-406-9611

572
New Kivel 48" Pallet Forks*
4200 lbs. capacity. Contact Daniel Stoltzfus with any questions 717-406-9611

573
New Kivel 48" Pallet Forks*
4200 lbs. capacity. Contact Daniel Stoltzfus with any questions 717-406-9611

574
New 2-10' Pallet Fork Extensions*
 Contact Daniel Stoltzfus with any questions 717-406-9611

575
New 2-8' Pallet Fork Extensions*
 Contact Daniel Stoltzfus with any questions 717-406-9611

577
Quick Attach Bucket*
50" wide. Contact Daniel Stoltzfus with any questions 717-406-9611

578
Cub Cadet Mower*
33" wide, 10.5 hp Briggs & Stratton engine. Engine runs but needs a new battery. Contact Daniel Stoltzfus with any questions 717-406-9611

579
Ariens Snow Blower*
5 hp gas engine. Does not run. Contact Daniel Stoltzfus with any questions 717-406-9611

580
Kemp Chipper
Model: K6CH, SN: 5930194R, new Briggs & Stratton motor. Contact Daniel Stoltzfus with any questions 717-406-9611

581
Predator Welder*
Runs, generator does not work. Contact Daniel Stoltzfus with any questions 717-406-9611

582
Welding Lead*
100' stinger section, 100' ground section. Contact Daniel Stoltzfus with any questions 717-406-9611

699
New Mini Skid Steer Track Loader
Lifting capacity: 840 lbs., 23 hp, Engine displacement/cylinders: 739/2, motor speed: 3600 rpm, max torque: 2500 rpm, cooling method: air-cooled, fuel tank capacity: 18.2 lbs., 2 of the tires do have some damage on the sidewall. Contact Myron Miller with any questions 574-536-6306

700
New Skid Steer Wolverine Disc Mulcher
Width: 72", 10" cutting capacity, 3/8" deck with reinforced sides, powered by a high torque motor and bearings. Contact Myron Miller with any questions 574-536-6306

701
New Skid Steer Wolverine 3 Blades Mower Attachment
Cutting width: 72", Overall width: 78", Length: 68". Contact Myron Miller with any questions 574-536-6306

702
New Skid Steer Wolverine 3 Blades Mower Attachment
Cutting width: 72", Overall width: 78", Length: 68". Contact Myron Miller with any questions 574-536-6306

703
New Skid Steer Wolverine 3 Blades Mower Attachment
Cutting width: 72", Overall width: 78", Length: 68". Contact Myron Miller with any questions 574-536-6306

704
New Skid Steer Wolverine 6 Way Dozer Blade Attachment
With controller, width: 84", weight: 1001 lb. Contact Myron Miller with any questions 574-536-6306

705
New Skid Steer Wolverine 6 Way Dozer Blade Attachment
With controller, width: 84", weight: 1001 lb. Contact Myron Miller with any questions 574-536-6306

706
New Skid Steer Wolverine 6 Way Dozer Blade Attachment
With controller, width: 84", weight: 1001 lb. Contact Myron Miller with any questions 574-536-6306

707
New Skid Steer Wolverine Stump Grinder Attachment
With controller, width: 45", height: 30", length: 76", below ground depth: 8", swing arc: 55°, maximum lift: 25°. Contact Myron Miller with any questions 574-536-6306

708
New Skid Steer Wolverine Stump Grinder Attachment
With controller, width: 45", height: 30", length: 76", below ground depth: 8", swing arc: 55°, maximum lift: 25°. Contact Myron Miller with any questions 574-536-6306

709
New Skid Steer Wolverine Stump Grapple Attachment
Width: 45.5", height: 30", length: 36". Contact Myron Miller with any questions 574-536-6306

710
New Skid Steer Wolverine Stump Grapple Attachment
Width: 45.5", height: 30", length: 36". Contact Myron Miller with any questions 574-536-6306

711
New Skid Steer Wolverine Rock Rake Attachment
Bucket width: 72", working width: 72", overall width: 85", overall length: 62.4", overall height: 21.5". Contact Myron Miller with any questions 574-536-6306

712
New Skid Steer Wolverine Fork Grapple Attachment
Weight with 48" forks: 425 lbs., overall width: 45.5", tine length: 48", cylinder size: 2" x 8". Contact Myron Miller with any questions 574-536-6306

713
New Skid Steer Wolverine Bale Squeeze Hydraulic Adjustable Attachment
Weight: 465 lbs., pack/unit: 55" L x 48" W x 40" H, maximum opening: 80", minimum opening: 36". Contact Myron Miller with any questions 574-536-6306

714
New Skid Steer Wolverine Bale Grapple Attachment
Width: 74", height: 30.8", depth: 40.8", bucket tines: 5, tine thickness: .4", number of grapple teeth: 3-4, space between grapple teeth: 18.4", grapple jaw opening: 60.6". Contact Myron Miller with any questions 574-536-6306

715
New Skid Steer Wolverine Tree Digger Attachment
Suitable for ball sizes 36", the tree shovel features a 3/8" plate with tapered and sharpened edges. Contact Myron Miller with any questions 574-536-6306

716
New Skid Steer Wolverine Tree Digger Attachment
Suitable for ball sizes 36", the tree shovel features a 3/8" plate with tapered and sharpened edges. Contact Myron Miller with any questions 574-536-6306

717
New Skid Steer Track Duty Bucket Attachment
Width: 66". Contact Myron Miller with any questions 574-536-6306

718
New Skid Steer Track Duty Bucket Attachment
Width: 66". Contact Myron Miller with any questions 574-536-6306

720
New Skid Steer Track Duty Bucket Attachment
Width: 72". Contact Myron Miller with any questions 574-536-6306

721
New Skid Steer Track Duty Bucket Attachment
Width: 72". Contact Myron Miller with any questions 574-536-6306

723
New Skid Steer Track Duty Bucket Attachment
Width: 78". Contact Myron Miller with any questions 574-536-6306

724
New Skid Steer Track Duty Bucket Attachment
Width: 78". Contact Myron Miller with any questions 574-536-6306

725
New Skid Steer Track Duty Bucket Attachment
Width: 84". Contact Myron Miller with any questions 574-536-6306

726
New Skid Steer Track Duty Bucket Attachment
Width: 84". Contact Myron Miller with any questions 574-536-6306

727
New Skid Steer Screening Bucket Attachment
Overall dimension: 49" x 76.6" x 31.4", bucket feeding width: 2.76", Equipment weight: 1053 lbs. Contact Myron Miller with any questions 574-536-6306

728
New Skid Steer Screening Bucket Attachment
Overall dimension: 49" x 76.6" x 31.4", bucket feeding width: 2.76", Equipment weight: 1053 lbs. Contact Myron Miller with any questions 574-536-6306

729
New Skid Steer concrete Chuter Attachment
Weight: 461 lbs., length: 38.5", length with extension: 68", width: 60", height: 30", lift capacity requirement: 3200 lbs. Contact Myron Miller with any questions 574-536-6306

730
New Skid Steer Box Broom Sweeper
Weight: 908 lbs., total width: 86", overall height: 39.3", overall length: 57.5", sweeping width: 72", brush diameter: 21.6", hydraulic motor: double direction, flow range: 15-20 gpm, bucket capacity: 91 gpm, water tank volume: 24 gpm. Contact Myron Miller with any questions 574-536-6306

731
New! 2023 Wolverine Pallet Fork Hydraulic Adjustable
48" long class II are 1 1/2" thick, 4" wide. Contact Myron Miller with any questions 574-536-6306

732
New! 2023 Wolverine Pallet Fork Hydraulic Adjustable
48" long class II are 1 1/2" thick, 4" wide. Contact Myron Miller with any questions 574-536-6306

733
New Mini Skid Steer Wolverine Pallet Fork Attachment
Overall height: 30", overall width: 30.5", overall length: 50", fork tines capacity: 2500 lbs. Contact Myron Miller with any questions 574-536-6306

734
New Mini Skid Steer Wolverine Pallet Fork Attachment
Overall height: 30", overall width: 30.5", overall length: 50", fork tines capacity: 2500 lbs. Contact Myron Miller with any questions 574-536-6306

735
New Mini Skid Steer Wolverine Pallet Fork Attachment
Overall height: 30", overall width: 30.5", overall length: 50", fork tines capacity: 2500 lbs. Contact Myron Miller with any questions 574-536-6306

736
New Mini Skid Steer Wolverine Auger Drive and Bit Attachment
Working pressure: 20.685 MPA, maximum drilling diameter 36", minimum drilling. Contact Myron Miller with any questions 574-536-6306

737
New Mini Skid Steer Wolverine Auger Drive and Bit Attachment
Working pressure: 20.685 MPA, maximum drilling diameter 36", minimum drilling. Contact Myron Miller with any questions 574-536-6306

738
New Mini Skid Steer Wolverine Auger Drive and Bit Attachment
Working pressure: 20.685 MPA, maximum drilling diameter 36", minimum drilling. Contact Myron Miller with any questions 574-536-6306

739
New Mini Skid Steer Wolverine Auger Drive and Bit Attachment
Working pressure: 20.685 MPA, maximum drilling diameter 36", minimum drilling. Contact Myron Miller with any questions 574-536-6306

740
New Mini Skid Steer Wolverine Combination Bucket Attachment
Width: 48", overall height: 18", overall length: 30". Contact Myron Miller with any questions 574-536-6306

741
New Mini Skid Steer Wolverine Combination Bucket Attachment
Width: 48", overall height: 18", overall length: 30". Contact Myron Miller with any questions 574-536-6306

742
New Mini Skid Steer Wolverine Combination Bucket Attachment
Width: 48", overall height: 18", overall length: 30". Contact Myron Miller with any questions 574-536-6306

743
New Mini Skid Steer Wolverine Hydraulic Angle Broom Attachment
With controller, width: 48", working width at 25° angle: 43.5". Contact Myron Miller with any questions 574-536-6306

744
New Mini Skid Steer Wolverine Boxbroom Sweeper Attachment
Width: 48", working width at 25° angle: 43.5", overall width: 58.5". Contact Myron Miller with any questions 574-536-6306

745
New Mini Skid Steer Wolverine Stump Grapple Attachment
Width: 44", Height: 16". Contact Myron Miller with any questions 574-536-6306

746
New Mini Skid Steer Wolverine Stump Grapple Attachment
Width: 44", Height: 16". Contact Myron Miller with any questions 574-536-6306

746A
New Mini Skid Steer Wolverine Stump Grapple Attachment
Width: 44", Height: 16". Contact Myron Miller with any questions 574-536-6306

747
New 2023 Wolverine Skid Steer Feed Bunk Sweeper
Bristle diameter: 36", bristle material: ply, 128 degree of brush head rotation, Min hydraulic pressure: 1700 psi. 

750
Crane Mats
(55) 8" x 4' x 16'. Contact Daniel Stoltzfus with any questions 717-406-9611

751
Crane Mats
(54) 8" x 4' x 16'. Contact Daniel Stoltzfus with any questions 717-406-9611

752
Crane Mats
(16) 8" x 4' x 16'. Contact Daniel Stoltzfus with any questions 717-406-9611

753
Crane Mats
(2) 12" x 4' x 20'. Contact Daniel Stoltzfus with any questions 717-406-9611

755
Crane Mats
Total of 5 pieces. 12" x 4' x 40', 10" x 4' x 40', 11 1/2" x 4' x 40', 11" x 4' x 40', 12" x 4' x 40'

756
Crane Mats
Total of 4 pieces. 11" x 4' x 26', 12" x 4' x 23'8", 11" x 4' x 27'5, 11" x 4' x 34'3"

Gallery Images Loading, Please Wait...
  • Home
  • Hire an Auction Company
  • Add Your Auction Company
  • Member Login
  • Contact Us
  • Desktop Site
Return
Formerly Lapp Lumber Co - Sawmill Equipment & Rolling Stock - Paradise, PA
 Live Auction
 
Auction Date(s)
Thursday Dec 14, 2023 Completed
Auction Location

Paradise, PA 17562
Company
Bright Star Realty and Auctions, INC

Contact: Loren Beachy
Phone: 574-825-0704
Website: brightstarauctions.com

Listing Terms and Conditions

Bidder Terms and Conditions
There is a 13% online buyer’s premium in effect for all purchases made online. Buyer’s premium is 10% for onsite bidders. All items sell where is as is with no warranties or guarantees. Buyer is responsible to inspect all merchandise prior to placing bids. Payment terms: Cash, check, wire transfer. Cash Payments totaling $10,000 or more will not be accepted. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice. Onsite buyers, payment is due the day of the auction. If onsite bidders wish to send a wire and still be assessed only the onsite buyer’s premium, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. All items are pick-up only. Smalls must be removed within 2 days. All items must be removed within 30 days unless otherwise noted. Loadout available day of auction, after that by appointment. Please call agent for more info. Buyer shall assume responsibility of all property when auctioneer says sold. Auction company is not responsible for any missing or stolen items.
These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer.
  1. Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
  2. Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded where required.
  3. Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer:
“Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction.
“Absentee Bidder” means a person or entity that submits an Absentee Bid.
“Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION.
“Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids.
“Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected.
“Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder.
“Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms.
“Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer.
"Buyer" means the Winning Bidder with respect to each Lot of Personal Property.
"Buyer's Premium" is an amount with respect to each Lot of Personal Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account.
“Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation.
“Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer.
“High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot.
“High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on the Lot put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price.
“High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot.
"Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event.
“Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer.
“No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale.
“Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions.
“Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online.
"Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered.
“Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers.
“Personal Property” means all tangible and moveable property, including fixtures, designated as Property.
“Pick-up” means the act of picking up or removing sold Lots by respective Winning Bidders at the date(s), time(s), and location indicated for such during the Auction or as later agreed to by Seller and Buyer.
“Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer).
“Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms-length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction.
“Property” means the Real Property and the Personal Property.
“Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium.
"Registered Bidder" means a person or entity that has registered to bid at the Auction.
“Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction.
“Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE.
“Reserve Price” means the minimum price that Seller is willing to accept for specific Property.
“Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer.
“Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid.
“Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by Seller).
"Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid.
“Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction.
  1. Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.

 

  1. Governing Law.
    1. For Auctions in the State of Indiana and Online. Unless otherwise indicated, all Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are deemed to be entered into in the State of Indiana, all bids and payments are deemed to be received in the State of Indiana, and the contract, if any, will be deemed to be formed and entered into in the State of Indiana.
  2. Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.
  3. Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
  4. Nature of the Auction. This Property is being sold at the Auction in the manner indicated on the first page of this Agreement.
  5. Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
  6. No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
  7. Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
    1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
    2. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
    3. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
    4. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
    5. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
    6. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
    7. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
    8. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.
 
    1. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties, (i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
    2. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
    3. No Reduction or Retraction of Online Bids. Online bids may not be reduced or retracted.
    4. Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.
    5. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.
  1. Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). All prebids and maxbids placed online are considered absentee bids. Auctioneer pledges complete integrity in the treatment of absentee bids and absentee bids may be initiated and advanced in accordance with Auctioneer’s policies and procedures. Auctioneer has the right to initiate any absentee bids at 25% to 50% of their maximum amount. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
  2. Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
  3. Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
  4. Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
  5. Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot of Personal Property will be the Buyer of such Property.
  6. All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
  7. Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
  8. Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.
  9. Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or representation by Auctioneer.
  10. Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
  11. Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
  12. Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ringman, or multiple bid assistants or ringmen, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
  13. Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
  14. All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
  15. Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked-Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
  16. Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases are due upon receipt of your invoice. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. Cash payments totaling Ten Thousand Dollars ($10,000) or more will not be accepted. If onsite bidders wish to send a wire, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.
 
  1. Wire Transfer Payments. Buyer shall obtain verbal verification of all bank account information from Bright Star Auctions prior to initiating transfer. Except as otherwise provided by law, we shall not be liable for any loss or damage due to misplaced, unauthorized or fraudulent fund transfers.
  2. ACH/eCheck Payments. By providing account information to Bright Star Auctions, buyer gives permission for Bright Star Auctions to retain payment information on file and represents they are the authorized account holder. Upon authorization to collect payment from Buyer’s account and prior to transfer, Buyer is responsible to notify their financial institution of the impending transaction. Buyer agrees to notify Bright Star Auctions of any changes in account information.
  3. Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.
  4. No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
  5. Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Tools, packing material, and/or assistance will not be supplied at Pickup, so Buyer must plan accordingly. Disassembly and removal shall be done in a quiet and workmanlike manner, and each Buyer, in making its bid, shall thereby indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer’s employees, agents, representatives, or independent contractors in connection with the Pickup. Any and all damages to the Pickup site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller. Each Buyer must show a copy of the invoice (digital or hard copy) and government-issued photo identification before Lots will be released. No Buyer shall bring pets or young children to the Pickup, as the movement of Lots presents an extremely high-risk environment that could result in injury or death.
  6. Insurance. Any work performed by Purchaser(s) or Purchaser Representative (including sub-contractors) shall be insured and provide proof of coverage against all claims for injuries against persons or damages to property which may arise from or in connection with the removal of items or equipment. Insurance coverage requirements are as follows: General Liability $1,000,000/$2,000,000 and Worker’s Compensation $1,000,000 or as required by State Law. Seller shall be listed as additionally insured, if required.
  7. Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them. In addition, Buyer’s bidding privileges may be suspended at future auctions.

  1. Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
  2. Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.
  3. Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled to specific performance or other equitable relief.
  4. Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
  5. Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
  6. Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
  7. Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
  8. Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
  9. Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim or suit relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
  10. Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their rights.

Lapp Lumber has been a trusted name for many years, enjoying numerous prosperous periods. Recently, when an opportunity presented itself to pursue other interests, the decision was made to sell the mill. Rest assured, the quality of this auction will impress. We offer a range of well-maintained, single-owner equipment!

00
Information Lot
Taking Consignments!
Auction agents: Eugene Hochstetler 574-242-1100 and Daniel Stoltzfus 717-406-9611
Type of auctionSawmill Liquidation and Rolling Stock
Highlight piecesWheel Loaders, Forklifts, Knucklebooms, Late Model Brewco B1600 Grade Resaw, Morbark Debarker, Precision Chip Pac, and More!

01
Preview & Inspection
Buyers are responsible to do their own inspection to determine the condition of the items they purchase. Inspections times are available as follows: Week of auction 8 to 5 or by appointment. Contact Eugene 574-242-1100

02
Loadout Information
Bright Star Auction Staff (Mose Troyer - 330-763-3780) will be on site day of auction until dark, Friday 12-15 from 8 to 4, and 12/18, 19, & 20 from 8 to 4. Yard will be closed on Saturday 12/16. After these dates you will need to contact Premier Rigging @ 260-214-1481 for an appointment.

03
Payment Information
Payment terms: 10% Onsite and 13% Online Buyer's Premium in affect for all purchases. Cash, check, wire transfer. Cash Payments totaling $10,000 or more will not be accepted. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice. Onsite buyers, payment is due the day of the auction. If onsite bidders wish to send a wire and still be assessed only the onsite buyer’s premium, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction.

 

04
CAT 390F L Hydraulic Excavator 1:50 Scale Replica - Die Cast Metal
Have fun buying a high-quality, die-cast toy! All proceeds including buyer's premium will go to Feed My Starving Children (FMSC) which is a Christian nonprofit dedicated to seeing every child and person around the world healthy, nourished and whole in body and spirit. Bright Star will pay for standard shipping and handling to the 48 contiguous states for buyers of this lot.
https://www.youtube.com/watch?v=jYATxeDmuzM&t=8s
 

90
Heavy Equipment Key Set 36 Keys
Shipping available for $20

91
Manual Sealless Steel Strapping Tool
Model A333, works for 1/2" 5/8" or 3/4" banding, new in box. Shipping available for $30

92
Stihl MS 660 Chain Saw
Good condition

93
Stihl MS 362 Chain Saw
Good condition

94
Stihl 036 Pro Chain Saw
Good condition

95
Stihl MSE 170C and MSE 140C Chain Saw
Electric, good condition

96
Stihl FS 91 Weedeater
String head, hand bar, and back sling. Good condition

97
DeWalt Cordless Tool Set
Sawzall, Lite, 2 drills, 2 batteries, carry case, impact, adapter for older style batteries

97A
Lincoln Battery Grease Gun
Extra battery and charger, carry case

97B
New Ingersoll Rand 3/4" Air Impact

99A

99A
2009 Wrens Handheld P-4000 Metal Detector
SN: 131181, battery charger, hardcase, hardware removal tools

100
2018 Morbark 640 Debarker
(1st of an entirety) In great conditon! Model: 640, SN: 1148, Weg 50 hp electric hydraulic pack, no power on head, feed rolls hydraulic driven, no hoses going to equipment

101
Weg Electric Motor
(Part of an entirety) 100 hp, 1775 rpm, 60 hz, 404/5T frame, starter box

102
Morbark Operator Cab with Controls
(Part of an entirety) 54" x 58" x 80", has heat and AC, includes control valves, insulated, hoses to equipment, and steps

103
Morbark Infeed Conveyor
(Part of an entirety) 52" x 26', 11" ladder back chain, hydraulic drive, no controls, lift cylinder on end

104
Morbark Outfeed Conveyor
(Part of an entirety) 52" x 30', 11" ladder back chain, hydraulic drive

105
2018 Morbark Debarker Entirety of Lots 100-104
With 10% raise.

106
Catwalk and Stairs
40" x 16' with rail, 48" top of platform, 2 pieces

106A
MDI Log Metal Detector
Model: TWA-2000, 56" x 48" inside opening, 5' x 8' overall, 52" x 90" mounting holes, control box. Looks to be in good condition.

106B
Fiberglass Conveyor Section
53" x 10', 26" pan, 24" sides, good condition

107
Morbark Log Trough with Kickers
62" x 32', 19" pan, 11" chain with side rakes, 6 arm kickers with hydraulic cylinder, hydraulic drive

108
Morbark Log Trough
Model: 25IN, SN: 1149, 62" x 13', hydraulic drive, infeed trough, 11" chain with side rakes

109
Barn Sweep Conveyor
42" x 72' flat section, 26' elevated, 16" paddles welded on chain, electric drive

110
Mellott 4 Strand Log Deck
stop'n'load, 18' x 26', 2 drive units with hydraulic drive, can be split for 2 decks with 2 strands

111
1980 Corley Carriage and Track
(1st of an entirety) SN 40-TD-014, 4 head block, turbo turners, on board electric hydraulic pak, Corley comp set PLC setworks controls, hydraulic setworks, air dogs, 60' track bolted on wood, 20' long, 7 axles, pantograph arm,

112
Carriage Drive and Feed
(Part of an entirety) Model: MR4-95 TW-3, hydraulic motor on cable drum, 100 hp electric motor with direct mount pump, control valve in cab, includes motor starter, 20" drum, 5/8" cable. Danfoss pump: 90R13OKA1CD80L3, C8F06GBA202020

113
Corley Husk 56" with 34" Topsaw
(Part of an entirety) 8' x 8' frame, no power, no saw, 30 hp electric on topsaw, 24" x 6' live belt

113A
Century Electric Motor
(Part of an entirety) Model: SC585-WS5U-5BU, 125 hp, 1170 rpm, manual starter, cutout box

114
Corley Cab
(Part of an entirety) 4' x 4'6" x 7', no controls, not insulated, AC unit

115
Corley Slab Drop Belt
(Part of an entirety) 36" x 12', 26" wide drop with 24" belt, electric drive

116
Corley Bar Type Turner
(Part of an entirety) 4' bar, control valve in cab, hydraulic drive

117
Corley Carriage Entirety of Lots 111-116
With 10% raise.

118
Mellott 4 Strand Log Deck
18' x 20' with 30" nose skids, stop'n'load, Tulsa gearbox with electric motor, cutout box, control switch in cab

119
Corley Edger and Gangsaw
Model: 648, SN: 76-E648-003, 6" x 48" capacity, 48" x 10' infeed rolls, no power, 2 lasers, 1 moving blade and 1 stationary for board edging, 4 stationary blades for gangsaw, 20" blades, popup side press roll, Lewis computer controls, 48" x 10' live outfeed rolls

119A
Pacemaker Electric Motor
100 hp, 405T frame, 1780 rpm

120
Live Roll Case with Pop-Up Transfer
24' x 12' roll case, 3 strand transfer 10'6" x 5', air popup cylinder, stop switch, electric drive

121
Spiral Roll Case and Side Transfer Rolls
36" x 16', 6 1/2" x 24" rolls, electric drive, 25" x 11' skate rolls, 2" x 21" rolls, 36" backstop with live press down rolls

122
Mellott Transfer Belt
26" x 10', 22" belt, no drive, elevated, adjustable legs

123
Frontline 42" Dust Blower
Model: F42ML, SN: 210515, 16" inlet, 14" outlet, 30 hp electric motor

124
Steel Dust Pipe
20' x 16", 85' x 14"-40' is new

125
Cornell Dust Blower and Pipe
26" blower, 10" inlet, 8" outlet, 30' x 8" steel pipe, 10' x 8" flex pipe, 3 hp electric motor

126
Live Roll Case
33" x 15'6", 6 1/2" x 24" rolls, stop switch, no drive

127
Live Roll Case with Board Kicker
33' x 14', 6 1/2" x 24" rolls, stop'n'kick switch, no drive

128
Live Roll Case
30" x 8', 6 1/2" x 24" rolls, electric drive

129
4 Strand Transfer Deck
12' x 10', H78 rooftop chain, steel slant decking for side loading, electric drive

130
Brewco Wolf B-1600 Resaw
(1st of an entirety) Model: B1600, SN: BEB06119, 1 3/4" x 40" solid steel band wheels, 2" bands, block guide system, 30 hp electric on head, no controls, 16" x 9' triple web feed with hydraulic drive, no support steel

131
Brewco Operator Cab with Controls
(Part of an entirety) 4' x 5', Brewco control station, full view glass, no support steel, has AC unit

132
Brewco Run Around System
(Part of an entirety) 5 way board separator, all rolls and decks for cant return and boards away, included hydraulic pak, no support steel, no controls

133
Brewco B-1600 Resaw and Run Around System Entirety of Lots 130-132
With 10% raise.

133A
Brewco E-Z Guide Dresser
6" cutting blade, electric drive.

133B
Bandsaw Blades
33 resharpened, 32 dull, 23' x 2" x .055" x 747 WM

134
Cat Walk and Support Steel under Resaw
As marked

135
28" Dust Blower
15 hp electric motor, 10" inlet, 8" outlet, steel elbow. Good condition

136
8" PVC Pipe
100'

137
Mellott Vibrating Conveyor
34" x 36' has 8" sies, one side slanted with 24" pan, 27" x 26' has 8" sides, 24" pan, screen section, steel support to ground are welded together to make 62', electric drive

138
Steel Side Pan
76" x 28', 1 1/2" x 4" C-Channel and 3/16" plate, support posts as marked

138A
Pavement Liner
12'4" wide, length unknown

139
Reckart 5 Strand Transfer Deck
14' x 18' plus 5' 6" pop-up transfer with electric drive, cant holding deck, support to ground, electric drive

140
Reckart 5 Strand Transfer Deck
Make: 08, Size: LD30, SN: 456, 14' x 11', board stop, electric drive, 1 end support to ground, 1 end first I-Beam support only

141
Roll Case with Spiral Rolls
30" x 32', 11" x 24" rolls, 16' has spiral rolls, electric drive, no support to ground

142
5 Strand Transfer Deck
15' x 6', 1' dead rolls, electric drive, no support to ground as marked

143
Reckart 4 Strand Transfer Deck with Pickup Arms
Make: 08, Size: 81X, SN 678, electric drive, air cylinder on cant pickup arms, 6'6" arms, 11' x 12' deck, board stop

144
Reckart 6 Strand Elevator
16' x 10'4" at base 10' tall, no support to ground, electric drive

145
Reckart 5 Strand Transfer Deck
Make: 06, Size: 81X, SN 676, 13' x 24', 4' slide pan on end, board stop, electric drive, no shaft or sprockets on one end

145A
Live Roll Case
28" x 30', 6 1/2" x 24" rolls, electric drive

146
Shurman Gangsaw
Model: 8-5BA-42, SN: 1364, single arbor, 13 blade setup, 26" blades, 8" x 42" capacity, 54" x 10' dead roll infeed, pop-up side press rolls, no power, 16 extra blades and collars, 8" x 42" capacity

146A
US Electric Motor
200 hp, 445T Frame, 1775 rpm, Nema size 5 starter, no wire

147
Reckart Roll Case
30" x 34', 11" x 24' rolls, electric drive, switch flaps

147A
Reckart 4 Strand Transfer Deck
12'6' x 10', photo eye sensor, pop-up arms, board stops

148
Mellott Roll Case Transfer
48" x 24', 6 1/2" x 42" rolls, 12' spiral rolls, electric drive

149
Corley Drop Saw Trimmer
10 saw heads with electric motor, 24" blades, 20' board capacity, motor control box with all starters, 16' scrap conveyor, control box, 8' x 30' overall

150
Mellott 5 Strand Unscrambler
Side transfer rolls, electric drive, 1 bad bearing, 7' x 15' x 42" tall

151
Lumber 4 Strand Transfer Green Chain
10' 6' x 58', electric drive

152
Lumber Carts and Tracks
42" x 10', 9 carts, (2) 42" x 6', 30' tracks 2 per cart

153
Lumber Carts
(8) 42' x 10', steel frame and wheels

154
Lumber Carts
(4) 42" x 8', steel frame and wheels

155
Lumber Carts
(1) 45" x 76'

156
Emglo Air Compressor
Model: U10B-120, SN: 5287637, mounted on 24" x 64" tank, 10 hp electric motor. Works good

157
Emglo Air Compressor
Model: U10B-120, SN: 012687138, 10 hp electric motor, mounted on 24" x 64" tank. Works good

157A
General Empire Air Dryer
Refrigerant type, electric drive

157B
Electrical Lot
All electrical conduit, wiring, control boxes, not related to build and not lotted to equipment

158
Reckart 42" Dust Blower
14' inlet, 12" outlet, 30 hp electric motor

159
10" PVC Pipe
100'

160
Mellott Vibrating Conveyor
21' x 28", 18" pan, 4" sides, 12' screen section, electric drive

161
Belt Conveyor
18" x 21', 15' pan, 6" sides, electric drive

162
Precision Chipper
(1st of an entirety) Size: 58-15, SN: C-3450, 6 knives, no power. In good condition

163
Lincoln Electric Motor
(Part of an entirety) 125 hp, 445T frame, 1785 rpm

164
Benshaw Soft Start and Cutout Box
(Part of an entirety) Model: RBX-1-S-180A-15C, SN: XM20050216-1-1, 150 hp max, no conduit or wire

165
Precision Chip Shaker Screen
(Part of an entirety) Model: 6x6, SN: 2474, electric drive

166
Precision Chip Cyclone
(Part of an entirety) 5' cyclone, includes pipe to chipper

167
Precision Chip Blower
(Part of an entirety) 24" blower with hopper and loading chute, 20 hp electric drive

168
Support Frame for Chipper
(Part of an entirety) 86" x 14' x 38" tall

169
Precision Chipper Entirety of Lots 162-168
With 10% raise.

169A
Mellott Vibrating Conveyor
30" x 45', 24" pan, 8" sides, electric drive, chipper chute

170
2004 EFFER Knuckleboom Tie Handler
Model: 75-1S, SN: 109097, bolted to floor, extenda boom, limited rotation grapple, control valves and hoses

171
Electric Hydraulic Pak
15 hp electric motor, 44" x 26" x 16" tank, no hoses, used on lot 170

172
Mellott Roll Case Dead Rolls
(2) 28" x 6', 6 1/2" x 24" rolls, (1) 24" x 8', 3 1/2" x 20" rolls

173
North Field Uni-Point Radial Saw
Model: X36AF, 16" blade, sliding head, wood table, swivel head, electric drive

174
Pinheiro Wood Planer
Model: D630, 9" x 24" capacity, electric drive

175
Morbark Knife Grinder
Model: 48HD, SN: 971-2109, coolant pump, 48" capacity, electric drive

176
Chipper Knives and Gauges
19 1/2" knives, work table

177
56" Circular Saw Blade
B style

178
56" Circular Saw Blade
B style

179
56" Circular Saw Blade
B style

180
56" Circular Saw Blade
B style

181
56" Circular Saw Blade
B style

182
56" Circular Saw Blade
B style

183
34' Circular Saw Blade

183A
Bucksaw Chain Bar
2 new chains, 5 used chains, 1 new 58" bar 3/4" pitch, misc. bucksaw parts

184
24" Trimsaw Blades
(10) 1 5/16" pilot

185
20" Edger Blades
(11) 3 1/2" pilot

186
Jockey Grinders Saw Teeth Holders
Metal shelf 3' wide x 1' deep x 7' tall, 2 jockey grinders-DeWalt grinder, assorted new and used tooth holders

187
Workbench with Tools and Sharpener
Hammers, wrenches, screw drivers, sockets, vise, Efco chain sharpener. Workbench 13' long x 2' deep x 33" tall

188
Metal Storage Cabinet with Contents
Cabinet 31" wide x 17" deep x 38" tall, misc. bolts, roller chain, misc. electricals

189
Cantilever Racking
80" wide x 4' deep x 12' tall

190
Cantilever Racking
91" wide x 4' deep x 12' tall

191
Cantilever Racking
68" wide x 4' deep x 12' tall

192
Cantilever Racking
68" wide x 4' deep x 12' tall

193
Carriage Drive Cable
New 3/4" cable unknown length,

194
Carriage Drive Cable
Pallet with assorted length new and used 3/4" cable

195
Tool Box Gas Can Tarp
Tool box with assorted tools, misc. fluids, tarps, pick axe, draw knives

196
110 Ladder Back and Chain Deck Chain
10' new ladder back chain plus smaller piece, (3) 10' new deck chain

197
Roll Case Rolls
Pallet with misc. new and used 12 smooth rolls, (2) 7" x 24" spiral rolls

198
Chain, Binders, and Come Along
Assorted length chains, 4 binders, 2 come alongs

199
Shovels, Brooms, and Forks
Assorted hand tools

200
Hard Hats, Stihl Bars, and Chain
Used bars/chains, gas cans, bar oil, chain/bar repair tools, misc. chainsaw parts, box with hand tools

200A
Carriage and Debarker Parts
Steel debarker head, carriage axles and wheel, misc. parts on skid

201
Sprockets, Pulleys, and Carriage Wheels
Misc. pulleys, sprockets, Corley carriage wheels-2 smooth, 2 grooved

202
Roller Chains and Rooftop Chains
Assorted length hydraulic cylinders, unknown condition

203
Hydraulic Cylinders
Assorted size hydraulic cylinders, unknown condition

204
Hydraulic Cylinders
Assorted size hydraulic cylinders, unknown condition, carriage parts

205
Hydraulic Motors
Assorted size hydraulic motors, new and used, unknown condition, new motors for resaw run-around

205A
New Hydraulic Pump
Model: PZS-4B-100N3E4481A, as used on Brewco resaw run-around

206
Conveyor Belts and Valu Lacer
New and used belts, 2 rolls 18 1/2" wide, 1 roll 14" wide, 1 roll 13" wide, 1 roll 24' wide, Valu Lacer SN: 7986-V

207
Skilsaws, Drills, and Grinders
Makita and Skilsaw circular saws, wire wheels, grinding wheels, Makita drills, Makita grinder, Craftsman drill. Conditions unknown

208
Battery Chargers and Extension Cords
Assorted extension cords, solar 6V/12V charger, Exide charger, Heavy Duty 6V/12V charger. Conditions unknown

209
New Hydrostar Carriage Drive Motor
Model: H-95 TW-3, SN: 21824339

210
New Watt Saver Electric Motor
Model: C215T17FB18D, 10 hp 3 phase, 215T frame

211
Werner Step Ladders
(1) 5' ladder, (1) 8' ladder

212
Banding Tools, Box Fan, and Grease Gun
Bar/chain oil, gas jug, banding clips, banding tools, pry bars, grease guns, box fan

213
Tool Lot
3 brooms, 1 shovel, cant hook, scraper

214
Tool Lot
Broom, fork, 2 cant hooks, sledge, shovel

215
Tool Lot
2 brooms, axe, shovel, cant hook

216
Tool Lot
2 brooms, rake, scraper, shovel, cant hook

217
Tool Lot
2 shovels, broom, fork, cant hook

218
Tool Lot
2 shovels, broom, cant hook, sledge

219
Tool Lot
2 forks, broom, shovel, cant hook

220
Tool Lot
Wrenches 1/4" to 15/16", screw drivers, pipe wrench, hammers, pliers

221
Oil Barrel Hand Pump
Empty barrel with hand pump

222
1 Ton Chain Hoist
Chain hoist with barrel claw

223
Track and Trolly
Track and trolly with come along, was used to transfer saw blades, approx. 30' track with 90 degree turn

224
Propane Heaters
3 pieces, condition unknown, 40,000 BTU hanging infrared heaters

225
Hydraulic Oil Hand Pump
AW-46 hydraulic oil, unknown quantity, hand pump

226
Shelf, Cabinet, and First Aid Cabinet
3' wide x 1' deep x 7' tall shelf with contents, misc. fuses, extension cords, grease gun, encoder, 18" wide x 1" deep x 36" tall cabinet with contents

227
Werner Extension Ladder
28' ladder aluminum

228
Benchtop 8" Grinder
Takes 2-8" grinding wheels, electric drive, works

229
Benchtop Vice
5 1/2" jaws

230
Pipe Wrench Set and Safety Signs
(9) 12" to 48" pipe wrenches, road safety triangles, safety signs

231
Craftsman and Assorted Tools
1/2" and 3/4" drive ratchet wrenches, sledge hammers, sockets

232
Crescent and SK Wrenches
S-K open end wrenches, Crescent wrenches, plus others

233
S-K Wrenches and More
All tools on wall as marked, S-K box end wrenches plus others, drill bits, Crescent wrenches, pulley pullers, screw drivers, hammers

234
Jack Stands and Tools
3 Jack stands, 4 bottle jacks, sledge, socket sets, fire extinguishers, water hose. All items on shelf and floor below workbench

235
2 Hose Reels with Hose
4 wheel cart with hose and reel, wall mount hose reel

236
Fisher Metal Working Anvil
31" long

237
Shelf and Contents
5 gallon Shop-Vac sweeper with extra filters, 2 gallon sprayer, 2 rolls of tar paper, driveway markers, 56" x 55" x 16" shelf

237A
Olsen Fuel Oil Furnace
Model: BFL-145, SN: BFVL76433, fuel tank, 143,000 BTU, set up in shop

238
Grease Guns
3 pistol grip, 1 regular

239
Shop Fox Radial Drill Press
1/2 hp electric, 3 1/4" spindle travel, 600-2920 rpm, drill bits

240
Miller Matic 250 Welder
Stock # 903291, SN: KF958692, CV-DC Arc welding, power source/wire feeder, Spool Matic 30A gun, 1 spool wire ER705-3 Mig wire

241
Welding Table and Supplies
36" x 36" x 33" steel table, some tools and parts, 3 adjustable stands

242
Vise Grips, Clamps, and C-Clamps
11 C-clamps, 10 vise grip clamps, box parts

243
Cutting Torch Set and Cart
2 wheel cart, Purox torch with Victor gauges, leather coat and chaps

244
Workbench and Parts
24" x 67" plus shelf with bins, hydraulic hose fittings, Curtis bins with parts, lots of shop parts

245
Wooden Cabinet and Contents
Pop rivet tool, paint supplies, 48" x 8' x 24" 4 door cabinet and contents

246
Wooden Workbench and Cabinet
10' x 36" x 30" workbench with 4" vice, 4' x 8' x 17" 4 door cabinet and contents, chainsaw parts and paint supplies, leather chaps, snow shoes, microwave

247
Viking Hydraulic Shop Press
12 ton, 30" x 66"

248
Hurricane Pressure Washer with Swing Arm
5 hp electric motor with pump directly mounted, National Pride swing arm with wand attached, 2 spray wands, wood cabinet

249
ARO Air Pump and Sealer Spray
1/2 Barrel Anchor seal, hose and wand, air hose

250
2022 John Deere 624P Wheel Loader
SN: 1DW624PATNLT16762.
Meter reads: 691 hours.
Engine: 6068 DW504.
Fuel type: Diesel.
ROPS: Enclosed.
3rd Valve: Yes.
Center to center of pins: 16" x 30 1/2".
Lift capacity: Unknown.
Tire Size: 20.5R25.
Attachments: None.
Heater: Yes.
A/C: Yes.
Quick Attach: Yes, JRB.

Features and Notes: Like new loader. 

251
2012 John Deere 624K Wheel Loader
SN: 1DW624KZCCE643479.
Meter reads: 7,271 hours.
Engine: 6068HDW78.
Fuel type: Diesel.
ROPS: Enclosed.
3rd Valve: Yes.
Center to center of pins: 16" x 30 1/2".
Lift capacity: Unknown.
Tire Size: 20.5R25.
Attachments: Dirt Bucket.
Heater: Yes.
A/C: Yes.
Quick Attach: Yes, JRB.

Features and Notes: Good running loader.

252
2006 John Deere 344H Wheel Loader
SN: LU344HX112891.
Meter reads: 2,446 hours.
Engine: 4045TF273.
Fuel type: Diesel.
ROPS: Enclosed.
3rd Valve: No.
Center to center of pins: 16" x 30 1/2".
Lift capacity: Unknown.
Tire Size: 17.5R25.
Attachments: None.
Heater: Yes.
A/C: No.
Quick Attach: Yes, JRB.

Features and Notes: Good running loader. Articulating plus rear wheel auto steer.

253
Rockland Log Forks with Grapple
Model: LFW, SN: 236837, 64" wide, 7" x 60" forks, JRB quick attach

254
JRB Log Forks with Grapple
Model: 624G, SN: 1008-AKR6718, quick attach, 60" wide, 7" x 50" forks, 16" x 30 1/2" pin distance

255
JRB 5 Yard Dirt Bucket
Model: 624G, SN: 0794-9892B, 126" x 48" x 36"

256
Tink High-Dump Bucket
Model: R02532075, SN: 11299F, 3000 lbs. rating, 118" x 70" x 60", JRB quick attach, 16" x 30 1/2" pin distance

257
Dust Bucket
JRB quick attach, 98" x 54" x 36"

258
Loader Lumber Forks
4" x 48", 60" wide, JRB quick attach

258A
Loader Tire Chains
(3) 34" wide x approx. 10' long, like new condition

258B
Loader Tire Chains
(3) 28" wide x approx. 10' long, shows slight wear

258C
Loader Tire Chains
(2) 28" wide x approx. 10' long

258D
Loader Tire
20.5R25, useable

259
2006 Volvo L60E Wheel Loader
Year: 2006.
Make: Volvo.
Model: L60E.
Serial No: L60EV61009.
Meter reads: 7,615 hours.
Engine: 6DZXL057033.
Fuel type: Diesel.
ROPS: Enclosed cab.
3rd Valve: No.
Tire Size: 20.5R25.
Attachments: None, bucket is sold separately.
Heater: Yes.
A/C: Yes, condition unknown.
Quick Attach: Yes.
4-speed powershift transmission, 17,000 lbs lift capacity, runs and operates as it should. Lot 259A was used with this machine. Good condition!
Contact Myron Nissley with any questions 574-536-2481

259A
Bucket Attachment
Was used on Volvo L60E Wheel Loader lot 259. Contact Myron Nissley with any questions 574-333-4986

259B
Volvo Quick Attach Forks*
40" x 24" center to center of pins. Will fit lot 259. Contact Daniel Stoltzfus with any questions 717-406-9611

260
2018 Case 621F Wheel Loader
SN: NFF232463.
Meter reads: 6,634 hours.
Engine: Iveco.
Fuel type: Diesel.
ROPS: Enclosed.
3rd Valve: Yes.
Attachments: Snow Dog CM11, 11' wide.
Heater: Yes, but need work.
A/C: Yes, but need work.
Quick Attach: Yes.

Features and Notes: Runs good. Has crack in windshield. Contact Daniel Stoltzfus with any questions 717-406-9611

261
2012 John Deere 544K Wheel Loader*
SN: 1DW544KZTBD640335.
Meter reads: 18,225 hours.
Engine: John Deere Model 6068HDW74A - 6.8L.
Fuel type: Diesel.
ROPS: Enclosed.
3rd Valve: Yes.
Lift capacity: 20,784 lbs.
Tire Size: 20.5R25.
Attachments: Bucket.
Heater: Yes.
A/C: Yes.
Quick Attach: Yes.

Features and Notes: Machine was regularly serviced, runs and operates. Very Nice Machine! Contact Myron Nissley with any questions 574-536-2481

262
Fiat Allis FR20 Wheel Loader*
SN: R2A2TZ500718.
Meter reads: 23,930 hours.
Fuel type: Diesel.
ROPS: Enclosed.
3rd Valve: No.
Center to center of pins: 44" wide x 32".
Lift capacity: Unknown.
Tire Size: 26.5-25.
Attachments: 116" bucket, 48" x 48".
Heater/AC: Yes but condition is unknown.
Quick Attach: No.

Features and Notes: Has air brakes. Runs and operates. 

269
John Deere 450-B Crawler Loader
Model: 450BA, SN: 120779T, meter reads: 208 hours, engine model: 42198F0, 6" x 48" forks, steering clutch not working, runs

270
Komatsu FD40 Forklift
SN: 126257A.
Meter reads: Not available.
Engine: Komatsu.
Fuel type: Diesel.
Load capacity: 8,370 lbs. at 24" load center.
Stage mast: 2.
Mast height: 98".
Side shift: Yes.
Fork positioner: No.
ROPS: Enclosed.
Tire size: (front) 8.25-15 NHS (rear) 7.00-12 NHS.
Tires: Pneumatic.

Features and Notes: 6" x 48" forks, spread to 68" outside, dual wheels. Runs and operates. 

271
2014 Uni Carriers 65 Forklift
SN: CU1F2-9Q20761.
Meter reads: 5,328 hours.
Fuel type: LP.
Load capacity: 6,000 lbs.
Stage mast: 3.
Mast height: 91".
Side shift: Yes.
Fork positioner: No.
ROPS: Open.
Tire size: (front) 21x8x15 (rear) 16 1/4x6x11 1/4.
Tires: Solid.
 
Features and Notes: 6" wide forks. Runs good, one owner machine, lift'n'weigh LNW-5 onboard scales. Recently serviced. Has quick attach, weather covers, and window included. 

272
2006 Cat GP18 Forklift
SN: 3AM00786.
Meter reads: 4,740 hours.
Fuel type: LP, tank included.
Lift capacity: 3,500 lbs.
Load capacity: 4,000 lbs.
Stage mast: 3.
Side shift: No.
Fork positioner: No.
ROPS: Open.
Tire size: (front) 650X10 (rear) 5.00-8.
Tires: front are air, rear are solid.

Features and Notes: Runs and operates good. Just serviced. Contact Daniel Stoltzfus with any questions 717-406-9611

275
1999 John Deere 240 Skid Steer
SN: KV0240A140487.
Meter reads: 1,285 hours.
Engine: John Deere 2.9L.
Fuel type: Diesel.
ROPS: Open with grills.
2 Speed: No.
Highflow: No.
Lift capacity: Not available.
Attachments: 65" bucket, quick attach.
A/C: No.
Heater: No.

Features and Notes: Hand and foot controls, 2 remote ports. Runs and operates. 

276
Bobcat 542B Skid Steer*
SN: 508512941.
Meter reads: 4,782 hours.

Features and Notes: Does not run, in rough condition. Contact Daniel Stoltzfus with any questions 717-406-9611

278
2012 Gehl Z27 Mini Excavator
SN: YMRZ27YYACYY00508.
Meter reads: 1,695 hours.
Engine: Yanmar.
Fuel type: Diesel.
Bucket: Edge 24".
Hydraulic thumb: Yes.
ROPS: Open.

Features and Notes: Runs and operates good. Tracks have some wear. Contact Daniel Stoltzfus with any questions 717-406-9611

278A
Edge 16" Excavator Bucket
Was used on Gehl Z27. Contact Daniel Stoltzfus with any questions 717-406-9611

279
Tires and Rims
(4) 365/70R18, new wheels

280
Case International Tractor
Model: 7130, SN: AJB0042676, 16 speed, 3 pt, enclosed cab, ISO remote hydraulic parts. Runs and operates

283
2004 Tigercat 630C Dual Arch Grapple Skidder*
SN: 6302025.
Engine: Cummins. 
Meter reads: 11,217 hours.
Tire size: 35.5LR32.  
Blade size: 7' plus 2-16" extension.
Grapple: Continuous rotation.
Cable winch: No winch.
ROPS: Enclosed.
Heat: Yes.          AC: Yes.
Type of controls: Joystick

Features and Notes: Runs and operates. 

285
1995 Cat 518C Cable Skidder
SN: 1CL00356.
Engine: Cat 3304.
Engine SN: 07Z31435.
Meter reads: 11,954 hours.
Tire size: 23.1-26.

Features and Notes: Has winch (model: W411-2). Runs and operates good. Contact Daniel Stoltzfus with any questions 717-406-9611

286
2005 John Deere 748G-III Dual Arch Grapple Skidder
SN: DW748GX598066.
Meter reads: 8,990 hours.
Engine: 6081 JD.
Fuel type: Diesel.
Tires: 30.5

Features and Notes: Runs good! Contact Daniel Stoltzfus with any questions 717-406-9611

290
2000 Prentice D210E Knuckleboom
SN: 210P55233.
Meter reads: 16,063 hours.
Engine: Cummins.
Fuel type: Diesel.
Continuous Grapple: Yes.
Trailer: Yes, 1999 Pitts VIN: 1PEKB3828XP990592.
Delimber: No.
Bucksaw Hookups: Yes.
A/C: Yes but condition unknown.
Heater: Yes but condition unknown.

Features and Notes: Joystick controls, trailer is road ready. Knuckleboom runs and operates. Trailer comes with title.

291
FEC Hydro Bucksaw with Bunks
5' blade, hydraulic drive, 98" x 18' bunks

292
2012 Barko 595ML Magnum Knuckleboom
SN: 11259523803.
Meter reads: 11,610 hours.
Engine: Cummins QSB 6.7.
Fuel type: Diesel.
Continuous Grapple: Yes.
Trailer: Yes, Pitts.
Delimber: No.
Bucksaw Hookups: Yes.
A/C: Yes.
Heater: Yes.

Features and Notes: Good running everyday loader, just came out of production. Hydraulic pump has been turned up some for more power, very aggressive loader. Regularly greased, serviced and well maintained! Tight and dry machine! Road ready! Great operating condition!   Contact Myron Nissley with any questions 574-536-2481

292A
2015 Barko 595B Knuckleboom*
SN: 11659523948.
Meter reads: 4,761 hours.
Engine: Cummins Q5967173.
Fuel type: Diesel.
Continuous Grapple: Yes.
Trailer: 2015 Pitts KB48-DHL, VIN: 5JYKB4823GP162255, GVWR: 55,000 lbs.
Delimber: CSI 264 Ultra with 36" cutting bar. 
Bucksaw Hookups: Yes.
A/C: Yes.
Heater: Yes.

Features and Notes: Joystick controls, high rise cab, live heel. Has circular saw setup, cutter bar on delimber currently not being used. Good running machine. 

293
2004 Barko 495ML Knuckleboom
SN: 10423466.
Meter reads: 7,221 hours (actual hours unknown)
Engine: Cummins.
Fuel type: Diesel.
Continuous Grapple: Yes.
Trailer: Yes, Pitts.
Delimber: No.
Bucksaw Hookups: Yes.
A/C: Yes.
Heater: Yes.

Features and Notes: Good running loader, just came off the job, slight drip hydraulic leak around turn table, starter solenoid hesitates at random times, comes with extra starter, regularly greased, serviced and well maintained, road ready! Ready for production! Contact Myron Nissley with any questions 574-536-2481

294
Barko 160C Knuckleboom
SN: Unknown.
Meter reads: 8,534 hours.
Engine: Cummins.
Fuel type: Diesel.
Continuous Grapple: Yes.
Trailer: Yes.
Delimber: No.
Bucksaw Hookups: Yes.
A/C: No.
Heater: Yes, but does not work.

Features and Notes: Used as a backup loader and in yard to load firewood, installed block heater, does have some wear, trailer needs some attention before transporting long distance, regularly greased, serviced, and well maintained, runs and operates. Contact Myron Nissley with any questions 574-536-2481

294A
Bucksaw Bunks
5' x 18' bunks, 5' saw bar, hydraulic drive. Contact Daniel Stoltzfus with any questions 717-406-9611

294B
Fec Hydro Bucksaw and Bunk
Model: 1550, hydraulic drive, 66" x 18' bunks, 5' saw, bunks are in 2 pieces, works but needs new hoses

295
Mighty Giant Tub Grinder
Pto drive, 12V controls, tub is hydraulic drive, 9' diameter tub, 23" x 25' discharge belt

296
2010 Morbark RXL30 Chipharvester
SN: 2057
Meter reads: 6,864 hours.
ROPS: Enclosed.
Heat/AC: Yes.

Features and Notes: Whole tree chipper ,4 knife w/3/4'' chip size , Morlift 1000 knuckleboom w/continuous rotation grapple. Good working condition

297
Morbark 22 Total Chip Harvester*
Model: 22, SN: 2030, 4 knife, 7/8" chip size, Cat 3412 engine, 1000 hp, cab with heat and AC, Joystick controls, Saylor Beall air compressor with 11 hp Honda motor, Morlift-1000 boom with control grapple, 30" x 12' infeed web, 60" chipper. Runs and operates. 

298
1988 Cat D4H Series II Dozer*
SN: 8PB02718.
Meter reads: 5,377 hours.
Engine: 3204DI.
Fuel type: Diesel.
Blade: 104" 6 way tilt.
ROPS: Open with screen.
A/C: No.
Heater: No.

Features and Notes: High track dozer. Runs and operates.

299
1989 John Deere 550G Crawler Dozer
SN: T0550GH759045.
Meter reads: 6,839 hours.
Engine: 4 cylinder John Deere.
Fuel type: Diesel.
Blade: 102" 6 way tilt.
ROPS: Open with screen enclosure.
A/C: No.
Heater: No.

Features and Notes: Forestry package, John Deere Winch with arch, 4 speed power shift, undercarriage in fair condition, runs and operates. Contact Myron Nissley with any questions 574-536-2481

300
2005 GMC C4500 Dump Truck
VIN #: 1GDE4C1285F505845.
Mileage: 187,234.
Engine Type: Duramax.
Fuel Type: Diesel.
Transmission: Automatic.
Front axle rating: 7,000 lbs.
Rear axle rating: 13,500 lbs.
GVWR: 17,500 lbs.

Features and Notes: 2 wheel drive, cloth seats, vinyl floor, aluminum Eby dump bed 8' x 12'6", swing open gates in back, 3' sides, tool box. Has title. 

310
2015 Chevrolet Silverado 2500HD Pickup Truck
VIN #: 1GC1KVEG2FF111771.
Mileage: 64,316.
Drive Line: 4WD
Engine Type: Vortec V8.
Fuel Type: Gasoline.
Transmission: Automatic.

Features and Notes: Has 7' bed, cloth interior, vinyl floor mats. Interior looks like new. Good running truck. Has title.

320
1993 Hillsboro 200 Gooseneck Trailer
VIN: 1TH3A6GK2P1011119, model: 224-2x-BT, 14000 lbs. GVWR, 20' x 4' dovetail, loading ramps. Contact Daniel Stoltzfus with any questions 717-406-9611

325
2015 Wood-Mizer LT70 Super Hydraulic Bandmill
SN: 456D72419FNEA3024.
Meter reads: 570 hours.
Engine: Yanmar Diesel. SN: 56941.
Setworks: Yes.
Debarker: Yes.
Bed extension: Yes, outfeed table.
Log capacity: 20'2"'.
Throat capacity: 30".
Fine adjustment outriggers: Yes.
Extra wide head: No.

Features and Notes: Moveable computerized control, includes 2 bands. Runs and operates good. Contact Daniel Stoltzfus with any questions 717-406-9611

326
2023 Echo 45HD2 Bandmill
Year: 2023.
Make: Echo.
Model: 45HD-2 Production Series.
Serial No: .
Powered by: 100HP Weg Electric Motor.
Meter reads: 800 hours.
Fully Hydraulic: Yes.
Log capacity: 38" diameter x 20' long.
Throat capacity: 32".
Stationary control system: Yes.
Setworks: Touch Screen Computer Setworks.
Debarker: Yes.
Laser: Yes.

Features and Notes: 40" heavy duty band wheels, 2" blade, 28" head lift, stationary hydraulic joystick controls, VFD on electric motor, Includes: closed-center hydraulic system, power end feed on tapers, automatic board guide, power drag back, (4) squaring arms, (2) log clamps, log turner, outfeed belt, laser, all hydraulic lines self contained, 30 HP hydraulic pack with soft start. Seller upgraded to a bigger mill. One of the most Heavy Duty bandmills on the market! , LOW Hours, Excellent Condition! Contact Myron Nissley with any questions 574-536-2481

327
Poulsen Bandmill
Fully Hydraulic - Hydraulic drive on head, 3 3/4" x 36" band wheels, (10) 4 1/2" x 20'6" bands, 3 saw vertical edger driven off main motor, pantograph arms, 50" x 36' frame, 5' x 6' cab with controls, computer set. Contact Myron Nissley with any questions 574-536-2481

328
Cooks Portable Edger
SN: Unknown, meter reads: 2072 hours, (2) 14" split blades, 1 is movable, (1) 15/16" arbor, (4) 1/4" x 30" cut capacity, 37 hp Perkins diesel, 30" x 7' infeed/outfeed with speed controlled power belt, return rollers, no laser light. Road ready nice well maintained machine! Contact Daniel Stoltzfus with 717-406-9611

350
Engine Lift
Hydraulic lift, 4' arm, on casters

351
3 Ton Floor Jack and Jack Stands
19" tall Jack stands

352
Tank Carts, Sawhorses, and Spill Cleanup Kit
1 wooden frame cart, 1 steel cart

353
Anchor Seal, End Sealer, and New Barrel
End sealer for logs and lumber, 55 gallon barrel

354
AW-46 Hydraulic Fluid and Barrel with Pump
Approx. 3/4 full oil, hand crank pump, 55 gallon barrel

355
SAE 15W-40 Engine Oil and Barrel with Pump
Approx. 1/2 full oil, 55 gallon drum, hand crank pump

356
Itasca, Bar, and Chain Oil
SAE30W, 1/2 barrel oil, steel hand

357
Lincoln Air Powered Grease Pump on Barrel
Empty barrel on Dollie

358
Tire Dollie
28" x 46", hydraulic lift, on casters

359
Transmission and Hydraulic Oil
2 new 5 gallon buckets of hydraulic oil, 4 gallons of new transmission oil, plus some coolant

360
Oil Cans and Funnels

361
Pipe Threading Tools
Vice and cutters

362
Assorted Parts
New 1.5 hp electric motor, sump pump, vibrating conveyor paddles, loader step parts

363
Werner Step Ladder
8' ladder

364
File Cabinet with Parts

365
Wooden Ladder
11'6" section

366
Tire Working Tools
Hand tools, hammer, tire compressor, valve stems

367
Landscapers Spreader, Chairs, and Tree Paint
Push spreader, handheld spreader, 4 plastic chairs, 4 boxes of tree paint, trash can

368
Earthway Spreader and Grass Seed
Hand crank spreader, 2 Rubbermaid barrels with seed

369
Ice Patrol Ice Salt
(20) 50 lbs. bags

370
Shelf and Bins with Parts
New and used bearings and sprockets, lots of assorted parts

371
V-Belts and Air Hose Reel
Assorted v-belts, retractable air hose reel with hose

372
Bolt Bin with Bolts
Lots of new bolts, 36" x 42" x 12" bin with bolts, 34" x 21" x 12" bin with assorted parts, rack on wall

373
Steel Shelf and Contents
Some new steel, mounting brackets for JRB quick attach

374
Wheelbarrow, Gas Can, and Broom

375
Fuel Tank with Pump
62" x 38" tank, Fillrite pump 110V 20 gpm, has meter

376
Poly Spill Containment Box
6' x 7' x 32"

377
Tokheim Fuel Pump
Electric drive, has meter

378
Tokheim Fuel Pump
Electric drive, has meter

379
Enclosed Tote
40" x 48" x 40"

380
Enclosed Tote
40" x 48" x 40", contents unknown, metal stand

381
2013 Rheem AC Unit
Model: RJNL-A060CK, SN: 8563F381305043, Commercial series, 47" x 76" x 36"

382
Ingersoll Rand 3/4" Impact
Air operated includes some hose-works, die grinder, air hoses, blow guns

383
Series I Chipper Knife Dresser
18" fan, cords, 3/4" hose

384
Honda 2" Water Pump and Sprinkler
2 outfeed hose, 1 stand with sprinkler head

385
Filters and Parts
Chain oil, John Deere oil filters, ATF+4 transmission oil

386
Trailer Parts
Air actuators, axle with hub, safety triangles, assorted parts

387
Brewco Bandsaw Wheels
1 1/2" x 40"

388
V-Belts
Assorted new belts

389
Air Compressor Parts and Skid of Parts
Pipe fittings, air filters and regulators, aluminum screening 26" wide

390
Hoses
Some new hose, 5/8" heater hose, 1" heater hose, assorted hydraulic hoses

391
Chip Shaker Swivel Knuckles and Parts
Air valve, assorted parts

392
Steel Crates with Lumber Sticks
(6) 5' x 46" x 5' steel rack, all lumber sticks to include stack by green chain, (approx. 10,000) 3/4" x 1" x 44"

392A
Wooden Ties
6" x 6" x 8', 6" x 8" x 91, total of 60 pieces.

393
Concrete Retaining Blocks
(34) 6' x 2' x 2'

394
Concrete Retaining Blocks
(36) 6' x 2' x 2'

395
Concrete Retaining Blocks
(18) 6' x 2' x 2'

411
Metal Lockers
(1) 5 section 5' x 78" x 18" deep, (1) 6 section 6' x 78" x 18" deep

396
Concrete Retaining Blocks
(15) 6' x 2' x 2', (1) 3' x 2' x 2', a little rough condition

397
Toshiba Electric Motor
150 hp, 1770 rpm, 444T frame

398
Lincoln Electric Motor
150 hp, 1780 rpm, 444T frame

399
Pacemaker Electric Motor
75 hp, 1775 rpm, 365T frame

400
Newman Electric Motor
100 hp, 1780 rpm, 444U frame

401
Motorola 2 Way Radios
30" x 36" table-Surge protector

402
Lexmark Printer
Model: XM3150, with cart

403
Fire Proof File Cabinet
20 1/2" wide x 30" deep x 27" tall, 2 drawer

404
Shaw-walker Fire Proof File Cabinet
20 1/2" wide x 30" deep x 52" tall, 4 drawer

405
Shaw-walker Fire Proof File Cabinet
21 1/2" wide x 30" deep x 52" tall, 4 drawer

406
Office Supplies
6' folding table, 20" x 24" cart, 18" x 26" x 29" 2 drawer file cabinet, 21" x 22" storage cabinet, printer, hard drive

429
Wolverine Brush Mower

407
Office Supplies
All contents of room: Shaw, walker filing cabinet, kneehole desks, Cannon primero MF416DW, tree paint supplies, monitor, hard drive, chairs

430
Wolverine Brush Mower

408
Office Supplies
2 type writers, 4 drawer file cabinet, safety supplies, kneehole desk, tree marking paint

431
Wolverine Brush Mower

409
White's Metal Detector
Industrial UL-3, ULC-950 head, turns on, condition unknown

432
Wolverine Brush Mower

410
Tables and Supplies
2' x 6' folding tables, 12 metal folding chairs, 4 wooden folding chairs, microwave, all items on tables, gloves, time clock

412
Water Fountain
Includes RO filters and tank

434
Wolverine Sicklebar Mower

413
Electric Fridge
Frigid Air

414
Manitowoc Ice Maker
Working condition

415
Vending Machine
Working condition.

416
25' x 39' Office Building
Water heater, softener, holding tank, electrical. Building only no contents

420
Kivel Skid Steer Forks
5" x 48", good heavy forks, quick attach. Contact Daniel Stoltzfus with any questions 717-406-9611

421
Virnig Brush Grapple
36" x 7', dual grapple, 1 grapple has slight bend. Contact Daniel Stoltzfus with any questions 717-406-9611

440
New 2023 Skid Steer Wolverine Trencher
Trenching depth: 48".
Trenching width: 8".

440
New 2023 Skid Steer Wolverine Trencher
Trenching depth: 48".
Trenching width: 8".

422
New Pendu 26" Dust Blower
10" inlet, 8" outlet, 10 hp electric motor. Contact Daniel Stoltzfus with any questions 717-406-9611

423
Rooftop Deck Chain
(2) 10' C55B, (1) 10' heavy deck chain. Contact Daniel Stoltzfus with any questions 717-406-9611

442
Wolverine Cement Mixer
Model: CM-11-250V

424
1 1/4 Ton Log Hook
Contact Daniel Stoltzfus with any questions 717-406-9611

443
Wolverine Cement Mixer
Model: CM-11-250V

425
Kubota SLV90 Skid Steer Window Glass
2 pieces new glass. Contact Daniel Stoltzfus with any questions 717-406-9611

426
New 2023 Heavy Duty Paladin Concrete Saw
6.5 hp Loncin G200F engine, gross weight: 196 lbs., Dimension: 37" x 20" x 37". Contact Daniel Stoltzfus with any questions 717-406-9611

427
New 2023 Heavy Duty Paladin Plate Compactor
6.5 hp Loncin G200F engine, Gross weight: 225 lbs, dimension: 68" x 20" x 35". Contact Daniel Stoltzfus with any questions 717-406-9611

427A
New 2023 Heavy Duty Paladin Plate Compactor
6.5 hp Loncin G200F engine, Gross weight: 225 lbs, dimension: 68" x 20" x 35". Has 3" x 3" hole on back side. Contact Daniel Stoltzfus with any questions 717-406-9611

428
New 2023 Skid Steer Wolverine Brush Mower Attachment
Width: 72". Contact Daniel Stoltzfus with any questions 717-406-9611

429
New 2023 Skid Steer Wolverine Brush Mower Attachment
Width: 72". Contact Daniel Stoltzfus with any questions 717-406-9611

430
New 2023 Skid Steer Wolverine Brush Mower Attachment
Width: 72". Contact Daniel Stoltzfus with any questions 717-406-9611

431
New 2023 Skid Steer Wolverine Brush Mower Attachment
Width: 72". Contact Daniel Stoltzfus with any questions 717-406-9611

432
New 2023 Skid Steer Wolverine Brush Mower Attachment
Width: 72". Contact Daniel Stoltzfus with any questions 717-406-9611

433
New 2023 Skid Steer Wolverine Sickle Bar Mower
15 GPM-25 GPM, with in-cab controller. Contact Daniel Stoltzfus with any questions 717-406-9611

453
Wolverine Pallet Forks
Model: PFA-11-33001

454
Wolverine Pallet Forks
Model: PFA-11-33002

434
New 2023 Skid Steer Wolverine Sickle Bar Mower
15 GPM-25 GPM, with in-cab controller. Contact Daniel Stoltzfus with any questions 717-406-9611

435
New 2023 Skid Steer Wolverine Tiller
Width: 72". Contact Daniel Stoltzfus with any questions 717-406-9611

436
New 2023 Skid Steer Wolverine Tiller
Width: 72". Contact Daniel Stoltzfus with any questions 717-406-9611

437
New 2023 Skid Steer Wolverine Tiller
Width: 72". Contact Daniel Stoltzfus with any questions 717-406-9611

438
New 2023 Skid Steer Wolverine Trencher
Trenching depth: 48". Trenching width: 8". Contact Daniel Stoltzfus with any questions 717-406-9611

439
New 2023 Skid Steer Wolverine Trencher
Trenching depth: 48". Trenching width: 8". Contact Daniel Stoltzfus with any questions 717-406-9611

440
New 2023 Skid Steer Wolverine Trencher
Trenching depth: 48". Trenching width: 8". Contact Daniel Stoltzfus with any questions 717-406-9611

441
New 2023 Skid Steer Wolverine Trencher
Trenching depth: 48". Trenching width: 8". Contact Daniel Stoltzfus with any questions 717-406-9611

462
Wolverine Grapple Bucket
Model: GB-11-72W

443
New 2023 Skid Steer Wolverine Concrete Mixer
Model: CM-11-250V, capacity: 300L, with in-cab controller. Contact Daniel Stoltzfus with any questions 717-406-9611

444
New 2023 Skid Steer Wolverine Concrete Mixer
Model: CM-11-250V, capacity: 300L, with in-cab controller. Contact Daniel Stoltzfus with any questions 717-406-9611

463
Wolverine Grapple Bucket
Model: GB-11-72W

445
New 2023 Skid Steer Wolverine Concrete Mixer
Model: CM-11-250V, capacity: 300L, with in-cab controller. Contact Daniel Stoltzfus with any questions 717-406-9611

446
New 2023 Skid Steer Wolverine Fork Extensions
8', 2.5" x 5", option extension dimension: 3" x 6". Contact Daniel Stoltzfus with any questions 717-406-9611

447
New 2023 Skid Steer Wolverine Fork Extensions
8', 2.5" x 5", option extension dimension: 3" x 6". Contact Daniel Stoltzfus with any questions 717-406-9611

448
New 2023 Skid Steer Wolverine Fork Extensions
8', 2.5" x 5", option extension dimension: 3" x 6". Contact Daniel Stoltzfus with any questions 717-406-9611

449
New 2023 Skid Steer Wolverine Fork Extensions
8', 2.5" x 5", option extension dimension: 3" x 6". May have slight bend. Contact Daniel Stoltzfus with any questions 717-406-9611

450
New 2023 Skid Steer Wolverine Concrete Breaker Attachment
Model: 750. Contact Daniel Stoltzfus with any questions 717-406-9611

451
New 2023 Wolverine Pallet Fork Hydraulic Adjustable
48" long, Class II are 1 1/2" thick, 4" wide. Contact Daniel Stoltzfus with any questions 717-406-9611

452
New 2023 Wolverine Pallet Fork Hydraulic Adjustable
48" long, Class II are 1 1/2" thick, 4" wide. Contact Daniel Stoltzfus with any questions 717-406-9611

453
New 2023 Wolverine Pallet Fork Hydraulic Adjustable
48" long, Class II are 1 1/2" thick, 4" wide. Contact Daniel Stoltzfus with any questions 717-406-9611

454
New 2023 Skid Steer Wolverine 3pt Hitch Adapter
Hydraulic flow range required: 20-25 gpm, hydraulic horsepower at 18 gpm: 20-25 gpm. Contact Daniel Stoltzfus with any questions 717-406-9611

455
New 2023 Skid Steer Wolverine 3pt Hitch Adapter
Hydraulic flow range required: 20-25 gpm, hydraulic horsepower at 18 gpm: 20-25 gpm. Contact Daniel Stoltzfus with any questions 717-406-9611

474
New Paladin Water Pump
Model: P1D-TWP-80, 3" semi trash pump, gas motor

456
New 2023 Skid Steer Wolverine Boxbroom Sweeper Attachment
Sweeping width: 72". Contact Daniel Stoltzfus with any questions 717-406-9611

475
New Paladin Water Pump
Model: P1D-TWP-80, 3" semi trash pump, gas motor

457
New 2023 Skid Steer Wolverine Boxbroom Sweeper Attachment
Sweeping width: 72". Contact Daniel Stoltzfus with any questions 717-406-9611

476
New Paladin Water Pump
Model: P1D-TWP-80, 3" semi trash pump, gas motor

458
New 2023 Skid Steer Wolverine Industrial Angle Broom Attachment
With in-cab controller, sweeping width: 72", overall width: 86", brush diameter: 26", angle: hydraulic. Contact Daniel Stoltzfus with any questions 717-406-9611

459
New 2023 Skid Steer Wolverine Industrial Angle Broom Attachment
With in-cab controller, sweeping width: 72", overall width: 86", brush diameter: 26", angle: hydraulic. Contact Daniel Stoltzfus with any questions 717-406-9611

460
New 2023 Skid Steer Wolverine Grapple Bucket
Width: 72", operating weight: 511 lbs, height: 26", cylinder: 2 in Bore 6 in Stroke, overall length: 36.26". Contact Daniel Stoltzfus with any questions 717-406-9611

461
New 2023 Skid Steer Wolverine Grapple Bucket
Width: 72", operating weight: 511 lbs, height: 26", cylinder: 2 in Bore 6 in Stroke, overall length: 36.26". Contact Daniel Stoltzfus with any questions 717-406-9611

462
New 2023 Skid Steer Wolverine Grapple Bucket
Width: 72", operating weight: 511 lbs, height: 26", cylinder: 2 in Bore 6 in Stroke, overall length: 36.26". Contact Daniel Stoltzfus with any questions 717-406-9611

463
New 2023 Skid Steer Wolverine Land Leveler Attachment
Width: 78", height: 23", weight: 704 lbs, bolt on cutting edge is optional. Contact Daniel Stoltzfus with any questions 717-406-9611

464
New 2023 Skid Steer Wolverine Land Leveler Attachment
Width: 78", height: 23", weight: 704 lbs, bolt on cutting edge is optional. Contact Daniel Stoltzfus with any questions 717-406-9611

465
New 2023 Skid Steer Wolverine Ripper Attachment
Width: 60", overall length: 32.79", number of teeth: 5, ripper tooth total lenth: 18.29", ripping depth: 7-9", weight: 400 lbs. Contact Daniel Stoltzfus with any questions 717-406-9611

466
New 2023 Skid Steer Wolverine Ripper Attachment
Width: 60", overall length: 32.79", number of teeth: 5, ripper tooth total lenth: 18.29", ripping depth: 7-9", weight: 400 lbs. Contact Daniel Stoltzfus with any questions 717-406-9611

467
New 2023 Skid Steer Wolverine Vibrating Roller
Width: 60", stimulation force: 3.3T. Contact Daniel Stoltzfus with any questions 717-406-9611

468
New 2023 Skid Steer Wolverine Auger Drive & Bit Attachment
Comes with auger dimensions: 12" and 18". Effective working depth: 25". Contact Daniel Stoltzfus with any questions 717-406-9611

469
New 2023 Skid Steer Wolverine Auger Drive & Bit Attachment
Comes with auger dimensions: 12" and 18". Effective working depth: 25". Contact Daniel Stoltzfus with any questions 717-406-9611

470
New 2023 Skid Steer Wolverine Auger Drive & Bit Attachment
Comes with auger dimensions: 12" and 18". Effective working depth: 25". Contact Daniel Stoltzfus with any questions 717-406-9611

471
New 2023 Skid Steer Wolverine Auger Drive & Bit Attachment
Comes with auger dimensions: 12" and 18". Effective working depth: 25". Contact Daniel Stoltzfus with any questions 717-406-9611

471A
New 2023 Skid Steer Wolverine Auger Drive & Bit Attachment
Comes with auger dimensions: 12" and 18". Effective working depth: 25". Contact Daniel Stoltzfus with any questions 717-406-9611

471B
New 2023 Skid Steer Wolverine Auger Drive & Bit Attachment
Comes with auger dimensions: 12" and 18". Effective working depth: 25". Contact Daniel Stoltzfus with any questions 717-406-9611

472A
40' High Cube Multi-Door Container
4 open side doors, 1 end door, lock box, side forklift pockets, one way shipping. Contact Daniel Stoltzfus with any questions 717-406-9611

473
New 2023 Paladin Vibratory Rammer Jumping Jack
Model: P1D-RM90, 6.5 hp gas engine, 13" x 18" shoe. Contact Daniel Stoltzfus with any questions 717-406-9611

474
New 2023 Paladin Water Pump
Model: P1D-TWP-80, 3" semi trash pump, gas motor. Contact Daniel Stoltzfus with any questions 717-406-9611

475
New 2023 Paladin Water Pump
Model: P1D-TWP-80, 3" semi trash pump, gas motor. Contact Daniel Stoltzfus with any questions 717-406-9611

475A
New 2023 Paladin Water Pump
Model: P1D-TWP-80, 3" semi trash pump, gas motor. Contact Daniel Stoltzfus with any questions 717-406-9611

476
New 2023 Paladin Water Pump
Model: P1D-TWP-80, 3" semi trash pump, gas motor. Contact Daniel Stoltzfus with any questions 717-406-9611

476A
New 2023 Paladin Water Pump
Model: P1D-TWP-80, 3" semi trash pump, gas motor. Contact Daniel Stoltzfus with any questions 717-406-9611

477
New 2023 Paladin Water Pump
Model: P1D-TWP-80, 3" semi trash pump, gas motor. Contact Daniel Stoltzfus with any questions 717-406-9611

477A
New 2023 Paladin Water Pump
Model: P1D-TWP-80, 3" semi trash pump, gas motor

485
Crosby 3 Saw Edger
4" x 32" capacity, 1 moving saw, 2 stationary, 35" x 7' infeed, 35" x 7' outfeed, no lasers, no power. Contact Myron Nissley with any questions 574-536-2481

486
3 Strand Log Deck
10' x 12', 5' loading arms, hydraulic drive. Contact Myron Nissley with any questions 574-536-2481

487
5 Strand Transfer Deck
10' x 13', rooftop chain, slant steel decking, no drive. Contact Myron Nissley with any questions 574-536-2481

488
5 Strand Transfer Deck
12'6" x 10', steel decking, no drive. Contact Myron Nissley with any questions 574-536-2481

490
Precision Rosserhead Debarker
(1st of an entirety) Aluminum head, hydraulic drive, 14'6" outside bull wheels, 2 1/2" x 24" bull wheels, air log kick, open control station, pantograph arm. Working every day. Contact Myron Nissley with any questions 574-536-2481

491
3 Strand Log Deck with Stop'n'Load
(Part of an entirety) meter reads: 1964 hours, 10' x 14', support one end only, hydraulic drive. Contact Myron Nissley with any questions 574-536-2481

492
Perkins Power Unit with Hydraulic Pack
(Part of an entirety) SN: YD35028-U7391426, 3 hydraulic pumps, direct mounted, no clutch, 6' x 4' x 30" tank. Contact Myron Nissley with any questions 574-536-2481

493
Precision Debarker Entirety
With 10% raise.

500
Morbark 636 Debarker
Post peeler, hydraulic drive on feed rolls, 42" x 46" x 5' cab with controls, no power. Contact Myron Nissley with any questions 574-536-2481

501
2004 Perkins Power Unit
Model: 1006-6TG, control box, runs good, used on debarker. Contact Myron Nissley with any questions 574-536-2481

502
Frick Edger with Deutz Engine
28" x 4" capacity, 2 hydraulic pumps and tank, 14" inserted tooth blades, one moving blade, 45 hp engine with control box. Contact Myron Nissley with any questions 574-536-2481

503
2001 Mitsubishi Diesel Engine
11.9L 280 hp at 1800 rpm, no clutch, Murphy controls, muffler, needs rebuilt, owner has radiator. Contact Myron Nissley with any questions 574-536-2481

504
Wood-Mizer Bandsaw Pro-Series Sharpener
Model: LTPR0BN-110, SN: 05080118, set up with air motor, electric motor included, on metal work table, computer controlled. Contact Myron Nissley with any questions 574-536-2481

505
Cat-Claw Automatic Bandsaw Sharpener
Electric drive, works good. Contact Myron Nissley with any questions 574-536-2481

506
Cat Claw Dual Tooth Setter
Blade holding arms, good condition. Contact Myron Nissley with any questions 574-536-2481

507
Band Roller
Hand crank. Contact Myron Nissley with any questions 574-536-2481

509
Griggio Band Resaw
Electric power feed, 15 hp electric on saw, 3" x 29" wheels, 28" x 40" table. Works, one wire got cut in transport. Contact Daniel Stoltzfus with any questions 717-406-9611

509A
New Bandsaw Blades
(15) 17'8" x 2" x .055XT-7WM. Contact Daniel Stoltzfus with any questions 717-406-9611

510
Frick 2 Saw Edger
1 moving saw, 16" blades with inserted tooth, 40" x 9' infeed, 40" x 9' outfeed, no power, in rough condition. Contact Daniel Stoltzfus with any questions 717-406-9611

520
Horse Drawn Lift
Single stage mass, no hydraulic pump, bale lift. Contact Daniel Stoltzfus with any questions 717-406-9611

521
Slip Scoop
6' wide pan. Contact Daniel Stoltzfus with any questions 717-406-9611

522
3pt Bale Spear
Contact Daniel Stoltzfus with any questions 717-406-9611

523
5' Bucket
Used with lot 520. Contact Daniel Stoltzfus with any questions 717-406-9611

524
3pt Snow Blower
78" blower, pto drive. Contact Daniel Stoltzfus with any questions 717-406-9611

525
5 Electric Motors
(1) 10 hp 215TZ frame, (1) 20 hp 256T frame, (3) 5 hp. Contact Daniel Stoltzfus with any questions 717-406-9611

526
2 Electric Motors
(1) 20 hp 256T frame, (1) 5 hp 184T frame, with cut out boxes. Contact Daniel Stoltzfus with any questions 717-406-9611

527
Hydraulic Motors and Hydraulic Pump
Used, condition unknown. Contact Daniel Stoltzfus with any questions 717-406-9611

528
26" Pendu Blower
10" inlet, 8" outlet, 15 hp electric motor. Contact Daniel Stoltzfus with any questions 717-406-9611

529
26" Pendu Blower
10" inlet, 8" outlet, no motor. Contact Daniel Stoltzfus with any questions 717-406-9611

530
26" Pendu Blower
10" inlet, 8" outlet, 15 hp electric motor. Contact Daniel Stoltzfus with any questions 717-406-9611

531
Ingersoll Rand Air Compressor
80 gallon tank, 175 max psi electric motor. Contact Daniel Stoltzfus with any questions 717-406-9611

533
SCMI M3 Gang Rig Saw
SN: R052805, new 12" feed web, steel web feed, 4" x 20" capacity, 12" blade, 5 blade setup, top arbur, 55 hp electric motor with controls. Contact Daniel Stoltzfus with any questions 717-406-9611

534
8' Roll Case
Electric drive, in rough condition. Contact Daniel Stoltzfus with any questions 717-406-9611

535
36" Cornell Blower
18" inlet, 12" outlet, no drive. Contact Daniel Stoltzfus with any questions 717-406-9611

536
Self Dumping Hopper
5' x 5'. Contact Daniel Stoltzfus with any questions 717-406-9611

537
60" Chipper Cyclone
5' cyclone with stand. Contact Myron Nissley with any questions 574-536-2481

538
Fuel Tank with Pump
24" x 64" x 24" aluminum tank, hand pump, hose with nozzle. Contact Daniel Stoltzfus with any questions 717-406-9611

539
Skider Tire Chains
2 Bearclaw style, fits 24.5 tires. Contact Daniel Stoltzfus with any questions 717-406-9611

540
Frost Bite Skid Steer Log Grapple
28' wide grapple, hydraulic clamp. Contact Daniel Stoltzfus with any questions 717-406-9611

541
Skate Rolls
(4) 16" x 6', 2 1/2" x 12 rolls. Contact Daniel Stoltzfus with any questions 717-406-9611

542
Steel Frame Wood Box
5' x 10' x 6' tall, fork pockets, 1 side swings open. Contact Daniel Stoltzfus with any questions 717-406-9611

543
Swamp Mat
8' x 16' wooden mat, 3 layers of 1 1/2" boards. Contact Daniel Stoltzfus with any questions 717-406-9611

544
Detroit 565kw Genset
Engine model: 71657300, generator model: 680FDR8064GG-282W, 680 frame, 1800 rpm, 16V, unit was damaged in shipping. Contact Myron Nissley with any questions 574-536-2481

545
Detroit 565kw Genset
Engine Model: 71637305, Lima generator SN: A80856AL, 1800 rpm, 16V. Unit was damaged in shipping. Contact Myron Nissley with any questions 574-536-2481

545A
6V-53 Detroit Diesel Engine*
216 hp, Approx. 8 Dyno hours on complete rebuilt. Starts and runs good. Contact Daniel Stoltzfus with any questions 717-406-9611

546
Chip Blower
24" blower with hopper, 9" x 15" discharge. Contact Myron Nissley with any questions 574-536-2481

547
Grapple Attachment
7 1/2 open, 73" wide overall, pin on, 40" center to center, 1 new cylinder. Contact Daniel Stoltzfus with any questions 717-406-9611

548
Log Skidder Attachment
56" grapple, extra hoses, quick attach for skid loader. Contact Daniel Stoltzfus with any questions 717-406-9611

549
Air and Oil Filters
Pallet with misc. air/oil filters, air filters for Detroit 6V53, air filters for Cat 518. Contact Daniel Stoltzfus with any questions 717-406-9611

550
Hard Hats
7 hats. Contact Daniel Stoltzfus with any questions 717-406-9611

551
Logging Supplies
Milwaukee impact, chainsaw chaps, tool boxes with parts. Contact Daniel Stoltzfus with any questions 717-406-9611

552
Stihl Chainsaw Parts
Chain repair tools, handyman jack. Contact Daniel Stoltzfus with any questions 717-406-9611

553
Stihl MS661C Magnum
24" bar. Runs and operates. Contact Daniel Stoltzfus with any questions 717-406-9611

554
Wolverine Augers
Contact Daniel Stoltzfus with any questions 717-406-9611

555
Wolverine Augers
Contact Daniel Stoltzfus with any questions 717-406-9611

557
New Set of 4 Forerunner Tires
10-16.5 Forerunner tires. Contact Daniel Stoltzfus with any questions 717-406-9611

558
New Set of 4 Forerunner Tires
12-16.5 Forerunner tires. Contact Daniel Stoltzfus with any questions 717-406-9611

559
New 66" Root Grapple Bucket*
Contact Daniel Stoltzfus with any questions 717-406-9611

560
New 78" Kivel Large Capacity Snow/Material bucket*
Contact Daniel Stoltzfus with any questions 717-406-9611

561
New Kivel Quick Attach Plates*
Contact Daniel Stoltzfus with any questions 717-406-9611

562
New Kivel Quick Attach Plates*
Contact Daniel Stoltzfus with any questions 717-406-9611

563
New Kivel Trailer Mover Attachments*
Contact Daniel Stoltzfus with any questions 717-406-9611

564
New 84" Bucket*
Contact Daniel Stoltzfus with any questions 717-406-9611

565
New 66" Bucket*
Contact Daniel Stoltzfus with any questions 717-406-9611

566
New 60" Bucket*
Contact Daniel Stoltzfus with any questions 717-406-9611

567
New 78" Bucket*
Contact Daniel Stoltzfus with any questions 717-406-9611

568
New 72" Bucket*
Contact Daniel Stoltzfus with any questions 717-406-9611

569
New 78" Bucket*
Contact Daniel Stoltzfus with any questions 717-406-9611

570
New Kivel 48" Pallet Forks*
3500 lbs. capacity. Contact Daniel Stoltzfus with any questions 717-406-9611

571
New Kivel 48" Pallet Forks*
3500 lbs. capacity. Contact Daniel Stoltzfus with any questions 717-406-9611

572
New Kivel 48" Pallet Forks*
4200 lbs. capacity. Contact Daniel Stoltzfus with any questions 717-406-9611

573
New Kivel 48" Pallet Forks*
4200 lbs. capacity. Contact Daniel Stoltzfus with any questions 717-406-9611

574
New 2-10' Pallet Fork Extensions*
 Contact Daniel Stoltzfus with any questions 717-406-9611

575
New 2-8' Pallet Fork Extensions*
 Contact Daniel Stoltzfus with any questions 717-406-9611

577
Quick Attach Bucket*
50" wide. Contact Daniel Stoltzfus with any questions 717-406-9611

578
Cub Cadet Mower*
33" wide, 10.5 hp Briggs & Stratton engine. Engine runs but needs a new battery. Contact Daniel Stoltzfus with any questions 717-406-9611

579
Ariens Snow Blower*
5 hp gas engine. Does not run. Contact Daniel Stoltzfus with any questions 717-406-9611

580
Kemp Chipper
Model: K6CH, SN: 5930194R, new Briggs & Stratton motor. Contact Daniel Stoltzfus with any questions 717-406-9611

581
Predator Welder*
Runs, generator does not work. Contact Daniel Stoltzfus with any questions 717-406-9611

582
Welding Lead*
100' stinger section, 100' ground section. Contact Daniel Stoltzfus with any questions 717-406-9611

699
New Mini Skid Steer Track Loader
Lifting capacity: 840 lbs., 23 hp, Engine displacement/cylinders: 739/2, motor speed: 3600 rpm, max torque: 2500 rpm, cooling method: air-cooled, fuel tank capacity: 18.2 lbs., 2 of the tires do have some damage on the sidewall. Contact Myron Miller with any questions 574-536-6306

700
New Skid Steer Wolverine Disc Mulcher
Width: 72", 10" cutting capacity, 3/8" deck with reinforced sides, powered by a high torque motor and bearings. Contact Myron Miller with any questions 574-536-6306

701
New Skid Steer Wolverine 3 Blades Mower Attachment
Cutting width: 72", Overall width: 78", Length: 68". Contact Myron Miller with any questions 574-536-6306

702
New Skid Steer Wolverine 3 Blades Mower Attachment
Cutting width: 72", Overall width: 78", Length: 68". Contact Myron Miller with any questions 574-536-6306

703
New Skid Steer Wolverine 3 Blades Mower Attachment
Cutting width: 72", Overall width: 78", Length: 68". Contact Myron Miller with any questions 574-536-6306

704
New Skid Steer Wolverine 6 Way Dozer Blade Attachment
With controller, width: 84", weight: 1001 lb. Contact Myron Miller with any questions 574-536-6306

705
New Skid Steer Wolverine 6 Way Dozer Blade Attachment
With controller, width: 84", weight: 1001 lb. Contact Myron Miller with any questions 574-536-6306

706
New Skid Steer Wolverine 6 Way Dozer Blade Attachment
With controller, width: 84", weight: 1001 lb. Contact Myron Miller with any questions 574-536-6306

707
New Skid Steer Wolverine Stump Grinder Attachment
With controller, width: 45", height: 30", length: 76", below ground depth: 8", swing arc: 55°, maximum lift: 25°. Contact Myron Miller with any questions 574-536-6306

708
New Skid Steer Wolverine Stump Grinder Attachment
With controller, width: 45", height: 30", length: 76", below ground depth: 8", swing arc: 55°, maximum lift: 25°. Contact Myron Miller with any questions 574-536-6306

709
New Skid Steer Wolverine Stump Grapple Attachment
Width: 45.5", height: 30", length: 36". Contact Myron Miller with any questions 574-536-6306

710
New Skid Steer Wolverine Stump Grapple Attachment
Width: 45.5", height: 30", length: 36". Contact Myron Miller with any questions 574-536-6306

711
New Skid Steer Wolverine Rock Rake Attachment
Bucket width: 72", working width: 72", overall width: 85", overall length: 62.4", overall height: 21.5". Contact Myron Miller with any questions 574-536-6306

712
New Skid Steer Wolverine Fork Grapple Attachment
Weight with 48" forks: 425 lbs., overall width: 45.5", tine length: 48", cylinder size: 2" x 8". Contact Myron Miller with any questions 574-536-6306

713
New Skid Steer Wolverine Bale Squeeze Hydraulic Adjustable Attachment
Weight: 465 lbs., pack/unit: 55" L x 48" W x 40" H, maximum opening: 80", minimum opening: 36". Contact Myron Miller with any questions 574-536-6306

714
New Skid Steer Wolverine Bale Grapple Attachment
Width: 74", height: 30.8", depth: 40.8", bucket tines: 5, tine thickness: .4", number of grapple teeth: 3-4, space between grapple teeth: 18.4", grapple jaw opening: 60.6". Contact Myron Miller with any questions 574-536-6306

715
New Skid Steer Wolverine Tree Digger Attachment
Suitable for ball sizes 36", the tree shovel features a 3/8" plate with tapered and sharpened edges. Contact Myron Miller with any questions 574-536-6306

716
New Skid Steer Wolverine Tree Digger Attachment
Suitable for ball sizes 36", the tree shovel features a 3/8" plate with tapered and sharpened edges. Contact Myron Miller with any questions 574-536-6306

717
New Skid Steer Track Duty Bucket Attachment
Width: 66". Contact Myron Miller with any questions 574-536-6306

718
New Skid Steer Track Duty Bucket Attachment
Width: 66". Contact Myron Miller with any questions 574-536-6306

720
New Skid Steer Track Duty Bucket Attachment
Width: 72". Contact Myron Miller with any questions 574-536-6306

721
New Skid Steer Track Duty Bucket Attachment
Width: 72". Contact Myron Miller with any questions 574-536-6306

723
New Skid Steer Track Duty Bucket Attachment
Width: 78". Contact Myron Miller with any questions 574-536-6306

724
New Skid Steer Track Duty Bucket Attachment
Width: 78". Contact Myron Miller with any questions 574-536-6306

725
New Skid Steer Track Duty Bucket Attachment
Width: 84". Contact Myron Miller with any questions 574-536-6306

726
New Skid Steer Track Duty Bucket Attachment
Width: 84". Contact Myron Miller with any questions 574-536-6306

727
New Skid Steer Screening Bucket Attachment
Overall dimension: 49" x 76.6" x 31.4", bucket feeding width: 2.76", Equipment weight: 1053 lbs. Contact Myron Miller with any questions 574-536-6306

728
New Skid Steer Screening Bucket Attachment
Overall dimension: 49" x 76.6" x 31.4", bucket feeding width: 2.76", Equipment weight: 1053 lbs. Contact Myron Miller with any questions 574-536-6306

729
New Skid Steer concrete Chuter Attachment
Weight: 461 lbs., length: 38.5", length with extension: 68", width: 60", height: 30", lift capacity requirement: 3200 lbs. Contact Myron Miller with any questions 574-536-6306

730
New Skid Steer Box Broom Sweeper
Weight: 908 lbs., total width: 86", overall height: 39.3", overall length: 57.5", sweeping width: 72", brush diameter: 21.6", hydraulic motor: double direction, flow range: 15-20 gpm, bucket capacity: 91 gpm, water tank volume: 24 gpm. Contact Myron Miller with any questions 574-536-6306

731
New! 2023 Wolverine Pallet Fork Hydraulic Adjustable
48" long class II are 1 1/2" thick, 4" wide. Contact Myron Miller with any questions 574-536-6306

732
New! 2023 Wolverine Pallet Fork Hydraulic Adjustable
48" long class II are 1 1/2" thick, 4" wide. Contact Myron Miller with any questions 574-536-6306

733
New Mini Skid Steer Wolverine Pallet Fork Attachment
Overall height: 30", overall width: 30.5", overall length: 50", fork tines capacity: 2500 lbs. Contact Myron Miller with any questions 574-536-6306

734
New Mini Skid Steer Wolverine Pallet Fork Attachment
Overall height: 30", overall width: 30.5", overall length: 50", fork tines capacity: 2500 lbs. Contact Myron Miller with any questions 574-536-6306

735
New Mini Skid Steer Wolverine Pallet Fork Attachment
Overall height: 30", overall width: 30.5", overall length: 50", fork tines capacity: 2500 lbs. Contact Myron Miller with any questions 574-536-6306

736
New Mini Skid Steer Wolverine Auger Drive and Bit Attachment
Working pressure: 20.685 MPA, maximum drilling diameter 36", minimum drilling. Contact Myron Miller with any questions 574-536-6306

737
New Mini Skid Steer Wolverine Auger Drive and Bit Attachment
Working pressure: 20.685 MPA, maximum drilling diameter 36", minimum drilling. Contact Myron Miller with any questions 574-536-6306

738
New Mini Skid Steer Wolverine Auger Drive and Bit Attachment
Working pressure: 20.685 MPA, maximum drilling diameter 36", minimum drilling. Contact Myron Miller with any questions 574-536-6306

739
New Mini Skid Steer Wolverine Auger Drive and Bit Attachment
Working pressure: 20.685 MPA, maximum drilling diameter 36", minimum drilling. Contact Myron Miller with any questions 574-536-6306

740
New Mini Skid Steer Wolverine Combination Bucket Attachment
Width: 48", overall height: 18", overall length: 30". Contact Myron Miller with any questions 574-536-6306

741
New Mini Skid Steer Wolverine Combination Bucket Attachment
Width: 48", overall height: 18", overall length: 30". Contact Myron Miller with any questions 574-536-6306

742
New Mini Skid Steer Wolverine Combination Bucket Attachment
Width: 48", overall height: 18", overall length: 30". Contact Myron Miller with any questions 574-536-6306

743
New Mini Skid Steer Wolverine Hydraulic Angle Broom Attachment
With controller, width: 48", working width at 25° angle: 43.5". Contact Myron Miller with any questions 574-536-6306

744
New Mini Skid Steer Wolverine Boxbroom Sweeper Attachment
Width: 48", working width at 25° angle: 43.5", overall width: 58.5". Contact Myron Miller with any questions 574-536-6306

745
New Mini Skid Steer Wolverine Stump Grapple Attachment
Width: 44", Height: 16". Contact Myron Miller with any questions 574-536-6306

746
New Mini Skid Steer Wolverine Stump Grapple Attachment
Width: 44", Height: 16". Contact Myron Miller with any questions 574-536-6306

746A
New Mini Skid Steer Wolverine Stump Grapple Attachment
Width: 44", Height: 16". Contact Myron Miller with any questions 574-536-6306

747
New 2023 Wolverine Skid Steer Feed Bunk Sweeper
Bristle diameter: 36", bristle material: ply, 128 degree of brush head rotation, Min hydraulic pressure: 1700 psi. 

750
Crane Mats
(55) 8" x 4' x 16'. Contact Daniel Stoltzfus with any questions 717-406-9611

751
Crane Mats
(54) 8" x 4' x 16'. Contact Daniel Stoltzfus with any questions 717-406-9611

752
Crane Mats
(16) 8" x 4' x 16'. Contact Daniel Stoltzfus with any questions 717-406-9611

753
Crane Mats
(2) 12" x 4' x 20'. Contact Daniel Stoltzfus with any questions 717-406-9611

755
Crane Mats
Total of 5 pieces. 12" x 4' x 40', 10" x 4' x 40', 11 1/2" x 4' x 40', 11" x 4' x 40', 12" x 4' x 40'

756
Crane Mats
Total of 4 pieces. 11" x 4' x 26', 12" x 4' x 23'8", 11" x 4' x 27'5, 11" x 4' x 34'3"