THIS IS A COMPLETED SALE
View current listings by this company

Showcase Equipment Auction & Expo
Previous Page Listing ID#: 1535393

Auction Location
Wolcottville, IN 46795

Auction Dates and TimesSALE IS COMPLETED
Friday Sep 15, 2023 Completed

Auction Type
Live Auction

Company Information
Bright Star Realty and Auctions, INC Contact: Loren Beachy Phone: 574-825-0704 Email: beachyauctions@gmail.com Website: brightstarauctions.com GoToAuction.com ID#: 5286 View company information and listings

Free Email Notifications

Sign up for the GoToAuction.com email notifications and we will let you know about sales in your area! You may set up alerts by area (zip and radius), keywords, and by company. It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions
Bidder Terms and Conditions There is a 13% online buyer’s premium in effect for all purchases made online. Buyer’s premium is 10% for onsite bidders. All items sell where is as is with no warranties or guarantees. Buyer is responsible to inspect all merchandise prior to placing bids. Payment terms: Cash, check, wire transfer. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice. Onsite buyers, payment is due the day of the auction. If onsite bidders wish to send a wire and still be assessed only the onsite buyer’s premium, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. All items are pick-up only. Smalls must be removed within 2 days. All items must be removed within 30 days unless otherwise noted. Loadout available day of auction, after that by appointment. Please call agent for more info. Buyer shall assume responsibility of all property when auctioneer says sold. Auction company is not responsible for any missing or stolen items. These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer. Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms. Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded where required. Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer: “Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction. “Absentee Bidder” means a person or entity that submits an Absentee Bid. “Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION. “Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids. “Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected. “Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder. “Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms. “Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer. "Buyer" means the Winning Bidder with respect to each Lot of Personal Property. "Buyer's Premium" is an amount with respect to each Lot of Personal Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account. “Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation. “Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer. “High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot. “High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on the Lot put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price. “High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot. "Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event. “Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer. “No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale. “Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions. “Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online. "Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered. “Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers. “Personal Property” means all tangible and moveable property, including fixtures, designated as Property. “Pick-up” means the act of picking up or removing sold Lots by respective Winning Bidders at the date(s), time(s), and location indicated for such during the Auction or as later agreed to by Seller and Buyer. “Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer). “Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms-length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction. “Property” means the Real Property and the Personal Property. “Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium. "Registered Bidder" means a person or entity that has registered to bid at the Auction. “Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction. “Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE. “Reserve Price” means the minimum price that Seller is willing to accept for specific Property. “Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer. “Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid. “Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by Seller). "Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid. “Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction. Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration. Governing Law. For Auctions in the State of Indiana and Online. Unless otherwise indicated, all Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are deemed to be entered into in the State of Indiana, all bids and payments are deemed to be received in the State of Indiana, and the contract, if any, will be deemed to be formed and entered into in the State of Indiana. Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium. Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion. Nature of the Auction. This Property is being sold at the Auction in the manner indicated on the first page of this Agreement. Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms. No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer. Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online: Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties, (i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer. No Reduction or Retraction of Online Bids. Online bids may not be reduced or retracted. Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification. Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). All prebids and maxbids placed online are considered absentee bids. Auctioneer pledges complete integrity in the treatment of absentee bids and absentee bids may be initiated and advanced in accordance with Auctioneer’s policies and procedures. Auctioneer has the right to initiate any absentee bids at 25% to 50% of their maximum amount. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder. Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion. Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder. Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction. Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot of Personal Property will be the Buyer of such Property. All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING. Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings. Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property. Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or representation by Auctioneer. Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller. Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction. Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ringman, or multiple bid assistants or ringmen, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid. Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer. All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS. Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked-Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made. Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases are due upon receipt of your invoice. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. If onsite bidders wish to send a wire, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion. Wire Transfer Payments. Buyer shall obtain verbal verification of all bank account information from Bright Star Auctions prior to initiating transfer. Except as otherwise provided by law, we shall not be liable for any loss or damage due to misplaced, unauthorized or fraudulent fund transfers. ACH/eCheck Payments. By providing account information to Bright Star Auctions, buyer gives permission for Bright Star Auctions to retain payment information on file and represents they are the authorized account holder. Upon authorization to collect payment from Buyers account and prior to transfer, Buyer is responsible to notify their financial institution of the impending transaction. Buyer agrees to notify Bright Star Auctions of any changes in account information. Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid. No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number. Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Tools, packing material, and/or assistance will not be supplied at Pickup, so Buyer must plan accordingly. Disassembly and removal shall be done in a quiet and workmanlike manner, and each Buyer, in making its bid, shall thereby indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer’s employees, agents, representatives, or independent contractors in connection with the Pickup. Any and all damages to the Pickup site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller. Each Buyer must show a copy of the invoice (digital or hard copy) and government-issued photo identification before Lots will be released. No Buyer shall bring pets or young children to the Pickup, as the movement of Lots presents an extremely high-risk environment that could result in injury or death. Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them. In addition, Buyer’s bidding privileges may be suspended at future auctions. Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer. Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession. Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled to specific performance or other equitable relief. Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages. Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property. Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium. Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller. Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site. Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim or suit relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial. Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their rights.

Listing Terms and Conditions

Bidder Terms and Conditions
There is a 13% online buyer’s premium in effect for all purchases made online. Buyer’s premium is 10% for onsite bidders. All items sell where is as is with no warranties or guarantees. Buyer is responsible to inspect all merchandise prior to placing bids. Payment terms: Cash, check, wire transfer. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice. Onsite buyers, payment is due the day of the auction. If onsite bidders wish to send a wire and still be assessed only the onsite buyer’s premium, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. All items are pick-up only. Smalls must be removed within 2 days. All items must be removed within 30 days unless otherwise noted. Loadout available day of auction, after that by appointment. Please call agent for more info. Buyer shall assume responsibility of all property when auctioneer says sold. Auction company is not responsible for any missing or stolen items.
These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer.

Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded where required.
Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer:

“Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction.
“Absentee Bidder” means a person or entity that submits an Absentee Bid.
“Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION.
“Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids.
“Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected.
“Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder.
“Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms.
“Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer.
"Buyer" means the Winning Bidder with respect to each Lot of Personal Property.
"Buyer's Premium" is an amount with respect to each Lot of Personal Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account.
“Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation.
“Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer.
“High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot.
“High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on the Lot put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price.
“High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot.
"Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event.
“Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer.
“No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale.
“Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions.
“Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online.
"Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered.
“Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers.
“Personal Property” means all tangible and moveable property, including fixtures, designated as Property.
“Pick-up” means the act of picking up or removing sold Lots by respective Winning Bidders at the date(s), time(s), and location indicated for such during the Auction or as later agreed to by Seller and Buyer.
“Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer).
“Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms-length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction.
“Property” means the Real Property and the Personal Property.
“Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium.
"Registered Bidder" means a person or entity that has registered to bid at the Auction.
“Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction.
“Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE.
“Reserve Price” means the minimum price that Seller is willing to accept for specific Property.
“Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer.
“Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid.
“Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by Seller).
"Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid.
“Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction.

Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.
Governing Law.
1. For Auctions in the State of Indiana and Online. Unless otherwise indicated, all Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are deemed to be entered into in the State of Indiana, all bids and payments are deemed to be received in the State of Indiana, and the contract, if any, will be deemed to be formed and entered into in the State of Indiana.
Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.
Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
Nature of the Auction. This Property is being sold at the Auction in the manner indicated on the first page of this Agreement.
Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
2. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
3. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
4. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
5. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
6. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
7. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
8. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.
9. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties, (i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
10. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
11. No Reduction or Retraction of Online Bids. Online bids may not be reduced or retracted.
12. Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.

1. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.
Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). All prebids and maxbids placed online are considered absentee bids. Auctioneer pledges complete integrity in the treatment of absentee bids and absentee bids may be initiated and advanced in accordance with Auctioneer’s policies and procedures. Auctioneer has the right to initiate any absentee bids at 25% to 50% of their maximum amount. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot of Personal Property will be the Buyer of such Property.
All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.

Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or representation by Auctioneer.
Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ringman, or multiple bid assistants or ringmen, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked-Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases are due upon receipt of your invoice. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. If onsite bidders wish to send a wire, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.
Wire Transfer Payments. Buyer shall obtain verbal verification of all bank account information from Bright Star Auctions prior to initiating transfer. Except as otherwise provided by law, we shall not be liable for any loss or damage due to misplaced, unauthorized or fraudulent fund transfers.
ACH/eCheck Payments. By providing account information to Bright Star Auctions, buyer gives permission for Bright Star Auctions to retain payment information on file and represents they are the authorized account holder. Upon authorization to collect payment from Buyers account and prior to transfer, Buyer is responsible to notify their financial institution of the impending transaction. Buyer agrees to notify Bright Star Auctions of any changes in account information.
Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.

No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Tools, packing material, and/or assistance will not be supplied at Pickup, so Buyer must plan accordingly. Disassembly and removal shall be done in a quiet and workmanlike manner, and each Buyer, in making its bid, shall thereby indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer’s employees, agents, representatives, or independent contractors in connection with the Pickup. Any and all damages to the Pickup site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller. Each Buyer must show a copy of the invoice (digital or hard copy) and government-issued photo identification before Lots will be released. No Buyer shall bring pets or young children to the Pickup, as the movement of Lots presents an extremely high-risk environment that could result in injury or death.
Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them. In addition, Buyer’s bidding privileges may be suspended at future auctions.
Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.
Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled to specific performance or other equitable relief.
Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim or suit relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their rights.

Listing Information
Bright Star is excited to provide a consignment auction to serve your area. Our goal is to provide sellers with an easy option to turn their unused equipment into cash. We provide cutting edge marketing to earn sellers top dollar for their equipment. Buyers can be expected to be treated fairly and with absolute transparency and integrity. All items sell absolute* No Minimums * No Reserves * We look forward to working with you. 00 Information Lot Auction Agent: Mervin Lehman 260-599-8369 Accepting consignments of quality equipment! Specializing in all heavy equipment, including construction, excavating, sawmill, forestry, trucks and trailers. All items sell absolute* No Minimums * No Reserves Call your auction agent today to capitalize on free marketing for your equipment. - - Showcase Equipment is having an inventory reduction auction and will be selling approx. 30% of their inventory. This will be a superb opportunity to purchase quality sawmill equipment that requires no rigging. We are also accepting consignments to add to this auction. The auction will be on the 15th with the expo starting on the 14th which features live lumber sawing demos with steam engines, vendor booths, and a spark show at dusk. We will be selling 2 hours’ worth of new cordless tools on Thursday evening. Food will be available. Plan to attend! 01 Preview Information* Monday to Friday from 7AM to 3PM. Contact Mervin to set up an appointment 260-599-8369 Location of auction: 206 E Vine St., Wolcottville, IN 46795 02 Loadout Information Free loadout on Saturday Sept 16 from 8 AM to 1 PM and for 2 weeks following the auction. Starting Oct 2nd, by appointment and for a $25 per lot loadout fee. Any items not picked up in 30 days become the property of Showcase Equipment. Contact Mervin 260-599-8369 03 Payment Information Payment terms: 7% sales tax, 10% Onsite Buyers Premium, 13% Buyers Online Premium. Cash, check, wire transfer. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice. Onsite buyers, payment is due the day of the auction. If onsite bidders wish to send a wire and still be assessed only the onsite buyer’s premium, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. 90 CAT 390F L Hydraulic Excavator 1:50 Scale Replica - Die Cast Metal Have fun buying a high-quality, die-cast toy! All proceeds including buyer's premium will go to Feed My Starving Children (FMSC) which is a Christian nonprofit dedicated to seeing every child and person around the world healthy, nourished and whole in body and spirit. Bright Star will pay for standard shipping and handling to the 48 contiguous states for buyers of this lot. https://www.youtube.com/watch?v=jYATxeDmuzM&t=8s 98 Heavy Equipment Key Set 36 Keys Shipping available for $20 99 Manual Sealless Steel Strapping Tool Model A333, works for 1/2" 5/8" or 3/4" banding, new in box. Shipping available for $30 510 Logging Cart Draft horse logging cart, steel wheels, air tires are available if so desired, new condition 511 John Deere Skidder SN: DW540EC548898, meter reads: 27020, cable skidder, 1/2" cable, 7' blade, 23.1-26 tires, good strong machine, in good condition 512 John Deere Skidder Model: JD740, grapple and cable, 3/4" cable, 112" blade, 30.5L-32 tires, rotary grapple, enclosed cab and heat, 2 way blade, in very good condition 520 Equipment Trailer 102" x 18', 5' beaver tail, double ramps, tandem dually, 10,000 lb axle, air brakes, 14" I beam frame, pintle hitch, single jack, needs new wood, 8.25/R15 tires, in good condition. No title, bill of sale only. 521 2015 PJ Gooseneck Trailer VIN: 4P5LD2524F3012947, 102" x 18'8", 5' beaver tail, double ramps, tandem dually, ST235/85R16 tires, spare, toolbox, hydraulic brakes, 10000 lb axles (dexter), stake buckets, double jack, road ready, in good condition. Has title. 522 Ditch Witch 3700DD Trencher SN: 3T0365, Meter reads: 1994 hours, 64" 6 way blade, 6" x 36" trench cut, pto ROPS, 2 new tires, has leak in transmission, operates as it should. In good condition 523 Trailer 6' x 11' tilt bed, single axle, brakes are inoperable. In good condition. No title, bill of sale only 527 Loader Forks JRB 4' long. In good condition 536 Loader Forks 12' x 43", in good condition 528 New Skid Steer Bucket 72", chain ready, by Trailside Metal Works 529 New Skid Steer Bucket 78", chain ready, by Trailside Metal Works 529B New 83" Steinsammler 529C New 83" Steinsammler 530 Loader Forks 12' x 43", in good condition 531 La-Mar Log Grapple SN: 0026, skid loader attachment, 1/2" cable, variable control on cable, quick release winch, like new condition 532 Crawler Loader Bucket 1 3/4 cu.yd. top pivot style, needs new hydraulic hoses, in good condition 533 New Holland Hoe Bucket 34" wide, in good condition 534 Logging Forks Floating forks skid loader attachment, 2” x 6” x 48" long, 12000 lb. capacity, includes welded on chain hooks, welded 2" ball hitch, back blade to keep your trail graded 535 New Skid Loader Attachment Grader 72" wide x 64" long x 18" tall, 2 adjustable blades, dual attachment plates 535A New Pull Type Grader Lawn mower or mini pony, 42" wide x 48" long x 8" tall, dual hookup 535B New Grader 7' grader, has hookup on both ends, lightly used condition 536 Prentice 325 Knuckleboom SN: 1S9HD4520PS239207. Meter reads: 17,201. Engine: Cummins. Fuel type: Diesel. Continuous Grapple: Yes. Trailer: Yes, new wiring, lights, and road ready. Delimber: No. Bucksaw Hookups: Yes. Features and Notes: 11R22.5 tires, new battery, has leaks in several cylinders, runs and operates as it should 540 2023 New/One-trip 20' Standard Container RXCU1023851, 20' long, double doors on one end 541 2023 New/One-trip 20' Standard Container HPCU2271820, 20' long, double doors on one end 551 New Aluminum Fuel Tank 150 gallon tank, includes stand and hose. 552 HMC Rosser Head Debarker Model: V206, SN: 1789-20, 20' log capacity, slant track, fully hydraulic, new glass in cab, pantograph, no controls in cab, reconditioned by seller, in good condition. Contact Myron Nissley with any questions 574-536-2481 553 Morbark Chip Pak Model: 3-48, SN: 529, 48", RH, 3 knife, no drive on chipper or shaker, reconditioned by seller, in good condition. Contact Myron Nissley with any questions 574-536-2481 554 New Accu-Cut Edger 4" x 36" capacity, HP electric motor, plug and play 554A 2023 Timber Buddy XP380 Band Mill John Deere 4045 PowerTech 120 HP diesel engine, fully hydraulic, 2" x 30" band wheels, 42" throat opening, 38" diameter x 24' log capacity, stationary stands. Includes log lift, mudsaw, power end feed on tapers, outfeed belt, and laser. BRAND NEW! 554B New 2023 Pro-Cut Resaw* Single head resaw with return, electric drive 555 New Whirlwind Cyclone 48" D, 10" inlet 556 New Whirlwind Blower SW-12 10" inlet 557 Brand New Supreme MFG Live Roll Case 20" x 20', very heavy duty, electric drive 558 Brand New Supreme MFG Lumber Cart Very heavy duty, 42" x 92" 558A Brand New Supreme MFG Lumber Cart Very heavy duty, 42" x 92" 558B Brand New Supreme MFG Lumber Cart Very heavy duty, 42" x 92" 558C Brand New Supreme MFG Lumber Cart Very heavy duty, 42" x 92" 558D Brand New Supreme MFG Lumber Cart Very heavy duty, 42" x 92" 558E Brand New Supreme MFG Lumber Cart Very heavy duty, 42" x 92" 561 New Self Dumping Hopper 3/4 yard fork lift pockets 562 New Self Dumping Hopper 1 yard, fork lift pockets 563 New Self Dumping Hopper 1 1/2 yard fork lift pockets 564 New Self Dumping Hopper 2 yard, fork lift pockets 565 New Self Dumping Hopper 2 1/2 yard, fork lift pockets 566 New Self Dumping Hopper 3 yard, fork lift pockets 567 New Self Dumping Hopper Heavy Duty, 4 yard, fork lift pockets 568 New Self Dumping Hopper Heavy Duty, 5 yard, fork lift pockets 569 Dynamic Grinder Model: 5240HZ, SN 5240H21008110620, 425 HP, 1591 hours, year 2011, Volvo Penta engine, 37,640 total weight, this unit is totally portable, good running condition 571 Portable Bandmill 28" cut, 670 cc predator, 20' trave, 12 volt setworks, extra bands, in good condition 572 Cleereman Carriage 3 HB, 12' carriage, pneumatic 60' track, no setworks, in good condition 573 1996 Lane Carriage Model: 336, SN: 56700196224, 4 hb, 14' carriage, hydraulic dogs, 10 gallon reseviour, electric drive, 60' track, working condition 574 Renco Carriage 4 HB, 20' carriage, air dogs, hydraulic setworks, 5 gallon reservoir, electric drive, working condition 575 Meadows Track and Carriage 3 HB handset, 14' carriage, husk, 60' track, in good condition 576 Helle Mill 3 HB, 14' carriage, fully hydraulic, 60' track, hydraulic pak, top and bottom blade husk, cab and controls, a complete setup log turner, in good condition 577 Renco Mill* 4 hb, 2 have air dogs, 3' x 15' carriage, 45' track, husk with Tyrone Berry drive, 56" blade, cab controls, no cab, electric drive on carriage, no drive husk, in good condition 578 Mater Carriage* 4 hb, hydraulic and air operated, 60' track, carriage feed 579 Salem Carriage* SN: 14824991, 3 HB, 48" linear position headblocks, Tong dog, Air dogs, 15' long, 2 HB recently replaced, includes pantograph, in good condition. 580 Meadows Mill* 2 HB, electric setworks, includes 40' track, carriage drive, husk, cab and controls, in good condition 580A Corley Circle Mill* 3 HB handset, RH friction feed, complete portable mill, 36' track, husk with 50" blade, log turner, blower, hydraulic reservoir, line shaft ready, in good condition 581 Cat Power Unit SN: SEK79269 Meter reads: 2,523 hours Fuel type: Diesel Clutch: No, #1 Bell housing Features and Notes: Oil preserve 66 psi at 650 rpm, 77 psi at 1800 rpm. A low hour engine with lots of potential! Good runner! 582 1993 Cummins Power Unit Model: KTA19G2 SN: 61174 Meter reads: 1,443.3 hours Engine: 37146338 Fuel type: Diesel Clutch: No Features and Notes: As is condition, all parts are included. As of 7/18/2023, crank shaft is still missing 583 5.9 Cummins Power Unit 190 hp, 1220 hours, electronic governor, no clutch, #2 bell housing, 11" drive, in very good condition 584 International Harvester Diesel Power Unit Model: UD360 SN: 6660001U009575 About 210 hp, has twin disc clutch, all new filters. Good running condition 584A 855 Cummins 240 hp, clutch and radiator, 10GE pulley, runs good, but has a water leak 585 John Deere Power Unit Model: 4045HF285. SN: PE4045L037422. Meter reads: 8,430 hours. 140 hp at 2400 rpm, twin disc clutch, brand new oil pump, excellent running condition 586 Brewer Transfer 3 strand, 3' x 14', C55 chain, electric drive, in good condition 587 Helle Log Deck 7 x 22, 2 strand H78 chain, with tulsa winch and hydraulic drive, stop'n'load, legs on load side are detached, in good condition 588 Brewer Unscrambler 4 strand, 6' x 7' x 4', electric drive, in good condition 589 Transfer 3' x 16', 3 strand, includes gear reducer with c-phase mount, in good condition 590 Belt Conveyor 12" x 20', no belt, includes reduction gear with c-phase mount, in good condition 591 Belt Conveyor 12" x 15', smooth belt, no drive, in good condition 592 Transfer 7" x 11", 3 strand, C55 chain, includes 3 ph 3 hp motor with gear reducer, good solid piece 593 Rees Airlock Model: RV-16, SN: 90-620-119, 16", includes 3 ph 2 hp motor with reduction gear, in good condition 594 Steel Hopper 30" x 39" infeed, 37" tall, was used as infeed on hog, in good condition 595 Shaving Bin 5' x 5' x 9'6" tall, includes 18" x 18" slide gate, a 21" x 60" cyclone with 9" intake, in good condition 596 Montgomery Blo-Hog 5" x 10" infeed, includes 8" x 10' Webster vibrating with 6" sides, electric drive, in good condition 597 Helle Vertical Edger 2 moveable blades, 5" capacity, electric drive, in good condition 598 Helle Log Turner 3' long, chain type hydraulic drive, in good condition 599 Pallet Carriage drive, hydraulic pump, control valve, in good condition 600 Chicago Press Brake Model: 135, SN: L15915, 15 ton, 6" throat, 4' wide, mechanical, 1 hp single ph, no dies, in good condition 601 W.A. Whitney Punch Press Model: 812-630, SN: 812-630-20286, 150 ton, 12" throat, 1" capacity, includes hydraulic pump with 30 hp 3 ph electric, in good condition 601A South Bend Precision Lathe Model: A, SN: CL 770R, 7/8" through, 30" capacity, 3 jaw chuck, threading, tool post, tooling, variable speed, electric drive, in good condition 602 Chicago Press Brake Model: 135, SN: L-15413, 15 ton, 6" throat, 4' wide, mechanical, 3/4 hp 3 ph electric, no dies, in good condition 603 Universal Mill Horizontal/vertical mill, 12 x 60 table, 38in travel, includes arbor for horizontal mill, power feed, in very good condition 604 Manford Mill Model: 3KV, SN: 891117, 10" x 50" bed, manual feed, includes taper collect set and some tooling electric drive, digital readout, in good condition 605 The Porta Punch 2.75 throat opening, 13 1/4" x 7 1/2" x 3 3/4" dimensions, 31 lbs punching capacity, 13/16 round hole through 1/2" plate includes full set of dies, hydro pak, electric, in good condition 606 Heska Vertical Bandsaw Model: ESU 6, SN: 773204, 1 1/2" x 25" band wheel tilt bed, bed has 10" travel, electric drive, in good condition 607 Bronx England Press Brake Model: 4358, SN: 23568, type: 13, 10 ton 6" throat, 4' wide, no dies, 3 hp 3 ph electric mechanical, in good condition 608 TOS Mill Model: FA3AV, SN: 12540, 12" x 54" bed, digital readout, power feed, electric drive, in good condition 609 Diehl Machinery double end saw Model DE-92, SN: 73M-3240-2516, Bore and chucking machine, 7 travel, has its own hydraulics, electric drive, in good condition 610 Grob Inc. Vertical Bandsaw SN: 10120, Type: NS18, 1 1/2" x 18" band wheel, tilt bed, electric drive, in good condition 616 Electric Motor Weg 75, 3 ph 1780 rpm, 364/ST WT. 775 617 Reeves Reduction Gear 10/1 ratio, right angle warm reducer, in good condition 618 Electric Motor WEG, 5 hp 3 ph 1755 rpm, 182/4T, in good condition 619 Vibrating Conveyor 2' x 10' with chipper in feed, conveyor drive, no power, in good condition 620 Vibrating Conveyor 16" x 10', 1 section only, parts only 621 Morbark Chip Blower Model: 079, 16 1/2" x 16 1/2" outfeed, reconditioned by Showcase Equipment, no motor 628 Welding Table 3/8" x 34' x 57", in good condition 629 Engine Hoist 2T capacity, 1 is like new, in working condition 630 Couplamatic Crimper SN: 47878, includes various fittings, in working condition 631 Pallet of Pulleys (1) G180R with hub, (2) 2TB184, (1) 2A18.08K, (1) 2B 16", (2) 2AK104h, (1)2TB60 with hub, (2) 1B 6.8 SDS with hub, (2) 6.8 2 BSPS, (1) 4B52 SD with hub 632 Pallet of Pulleys (1) 20-5-C with F-hub, (2) 8C10.0, (1) B6 12.5, (1) B314, (1) B218, (1) 2C10, (1) 8B 9.5, (1) 3B7, (1) 4B x 9.4, (1) 3C x 8, (1) 5B 8.0, in good condition 633 Pallet of Pulleys (1) 6c 270 with hub, (1) 4B25OR with hub, (1) 5C 16 with hub, (1) 6C10, in good condition 634 #80 Roller Chain Approx. 1200', 2626 lbs., this chain is lightly used, like new condition 635 Pallet Jack (1) 27" x 48", 5500 lb. capacity, (1) 21" x 45", 2200 KG capacity, in good condition 636 Pallet Jack (2) 21" x 45", 2000 KG, in good condition 637 Lumber Racks (2) 3' x 5' x 4', (1) 3' x 80" x 44", in good condition 638 Cornell Mud Saw 6' at pivot, electric drive, no blade, in good condition 639 Moulder Infeed 6" x 6" capacity, electric drive, like new condition 640 Electro Hydraulic Power Unit SN: IN45224, GPM260, pump: 312, 50 hp, 3 ph., 480 volt, part of lid missing, 60 gallon reservoir, in good condition 641 Hydro System Power Pak Model: 10-V10.1P1P.1C20-1-200, SN: 3741 501127, 10 gallon capacity, 5 hp 3 ph., includes disconnect, 4 parker air valves, 4 vicker hydraulic valves, needs tune up 642 2010 Hydraulic Pump SN: 2520V21A141CC22L, includes 5CX14 pulley, 3 hydraulic valves 643 Lift Table 54" D, 3000 lbs. capacity, pneumatic, in good condition 644 Pallet Jack (1) 27" x 48', (1) 21" x 45", 2000 lbs. capacity 645 Pallet Jack (2) 21" x 45, 2000 capacity, in good condition 646 Lincoln Welder Model: AC-180-S, SN: 5879-704, Input: 1 ph, 230 volt, 60 cycle, 37 amps, Output: Max welding current 180 amps at 25 Arc volts, 115 degree Celsius rise, mas O.C.V-75 volts, duty cycle 207. In good condition. 647 Rigid Pipe Threader SN: 2391, 2" capacity, number 208 Tri stand, no dies, in good condition 648 Misc. Belting Used belting, various widths and lengths 649 Misc. Belting Used belting, various widths and lengths 650 Misc. Pulleys (1) 4C 16.0, (2) 2B x 6, (1) 2B x 4.5, (1) 2B x 7.5, (1) 2B x 9.75, (1) 2B x 8, (1) 1B x 11.5, (1) 25V x 1250, (1) 3C75, (1) 4C x 7, (2) 2B x 5.5 651 New Carolina Blower Fan 21" x 52", 12 paddles, 2 11/16" Bore 652 New Carolina Blower Fan 20" x 46", 6 paddles, 3" Bore 653 Carolina Blower Fan 21" x 52", 12 paddles, 2 11/16" Bore, in good condition 654 Carolina Blower Fan 21" x 52", 6 paddles, 2 11/16" Bore, in good condition 655 Truck Tool Box Aluminum, fits any full size bed 656 Waste Chain Detachable chain, includes drive and idler end, in good condition 657 Barn Sweep Chain 14" paddles, in good condition 658 Waste Conveyor Chain 16" paddles, HD, approx. 35', in good condition 659 Waste Conveyor Chain 16" paddles, HD, approx. 20', in good condition 660 Misc. Chain H-130 roof top, drag chain with new paddles, in good condition 661 Mellot Hydraulic Pak Single vane, 12" x 20" x 18" reservoir, 25 hp 3 ph., in good condition 662 Hydraulic Pak Single vane, 40 hp 3 ph., 30" x 36" x 18" reservoir, in good condition 663 Hydraulic Pak Model: PV4290R-32009, SN: 26958, Delavan pump, 25 hp 3 ph., heat exchanger, 27" x 45" x 15" reservoir, no motor on heat exchanger fan, in good condition 664 Hydraulic Pak Single vane, 110 solenoid, 5 hp 3 ph., 10 gallon reservoir, needs maintenance 665 Radiator 43" x 43", 36" fan, 7.5 hp 3 ph. 1155 rpm, dual direction fan, in good condition 666 Continental Hydraulic Power Pak Model: P81-81-898, 35 gallon, vane type, 7.5 hp 3 ph., in good condition 667 KL Hydraulic Reservoir 24" x 36" x 14" capacity, 10 hp 3 ph., no pump, in good condition 668 Hydraulic Unit 11" x 11" x 30" vane type, hp unknown, includes hoses and (2) 10" stroke rams, in good condition 669 Hydraulic Unit Vane type, 10 gallon capacity, 5 hp 3 ph., in good condition 670 Rexroth Reservoir 32" x 52" x 15", in good condition 671 Hydraulic Reservoir 24" x 36" x 12" capacity, in good condition 672 Hydraulic Reservoir 16" x 24" x 16", vane type, 5 hp 3 ph., in good condition 673 Sullair Compressor Model: 25-100 L, SN: 18697-KGD, max psi 110 screw type, 100 hp 3 ph. includes disconnect, in good condition 674 Hydraulic Unit 22" x 43" x 18", vane type, 15 hp 3 ph., in good condition 675 Hydraulic Unit 14" x 25" x 16", vane type, no motor, good condition 676 Racine Reservoir 80 gallon, heat exchanger, in good condition 677 Hydraulic Unit 12" x 29" x 16", vane type, hp unknown, heat exchanger 678 Hydraulic Pump Vane type, 15 hp 3 ph., in good condition 679 Zabel Equipment Hydro Pak Model: ZE30100, SN: 1506, vane type, 10 hp 3 ph., 3 variable speed controls, in good condition 680 Hydraulic Unit 10 gallon, vane type, 2 hp 3 ph., includes 3 Vickers valves, in good condition 681 Mellot Hydraulic Pak 10 gallon, vane type, 10 hp 3 ph., needs maintenance 682 Punch Press Pneumatic clutch, 3 hp 1 ph. 220 volt, disconnect, no dies, in good condition 683 MorBark Chip-Pac 48", RH, 3 knife, no drive on chipper, in good condition 684 Precision Chipper 58", 3 knife, RH, top discharge, needs rebuilt 685 Precision Chipper SN: C-788, 48", RH, 3 knife, top discharge, needs rebuilt 686 Precision Chipper 60", RH, 3 knife, top discharge, needs rebuilt 687 Precision Chipper SN: C2115, 48", RH, 6 knife, top discharge, includes 2 boxes of new knives, in good condition 688 Fulghum Chipper 66", RH, 8 knife, bottom discharge, in good condition 689 Sumner Chipper/Mulcher Model: 35, SN: 1181, 15 1/2" x 16 1/2" intake, includes 75 hp 3 ph., in good condition 690 Scan Hugger Waste Grinder SN: 926412, type: HT 75-60-4, 915 rpm 691 Shutte Hammer Mill Model: 1320, SN: 108, 3600 rpm, includes long sweep elbow, no drive, in good condition 692 1997 ZENO Grinder SN: 97 A-4535, Type: ZTLL1600X, 1800, 1 extra screen, in good condition 693 Chipmaster Chipper Model: 60R, 68", RH, 6 knife, top discharge, in good condition 694 Chipmaster Chipper Model: 75L, SN: 69 10 03, 86", LH, 8 knife, in good condition 695 Jeffrey Hammermill SN: 11899, size: 34WB, 12" x 36" intake, 100 hp 3 ph., in good condition 696 Soderhamn Chipper 68", RH, 6 knife, top discharge, in good condition 698 Fulghum Shaker Screen SN: F1-R-667, 7x7, includes cyclone, 3 hp 3 ph., in good condition 699 Fulghum Shaker Screen SN: F1-R-467, 6x6, 5 hp 3 ph., in good condition 700 Roto Flow Chip Screen 6" x 6", 2 hp 3 ph., in good condition 701 Soderhamn Chip Screen Model: CS-25, SN: 622, 5x5, cyclone, 2 hp 3 ph., needs maintenance 702 Soderhamn Chip Screen Model: CS-27, SN: 268, 7x7, no drive, in good condition 710 Irvington Moore Trimmer Drop saw trimmer, 18' capacity, 40 hp 3 ph., this unit could be line shaft ready, extra blades, chain included, in good condition 711 Morris Drop-Saw Trimmer 18' capacity, 9 individual electric motors, 8" thick capacity, includes drive shaft and chain, no idler, working condition 715 Double End Timmer 9" x 52" capacity, (2) 15 hp 3 ph., has drive but no idlers, in good condition 716 Double End Timmer 9" x 22' capacity, (2) 7.5 hp 3 ph., includes all controls, hydraulic pak, everything intact, needs maintenance 717 Double End Timmer Model: K-25, Newman 9" x 20' capacity, electric drive, no controls, needs to go through shop 718 Double End Timmer 8" x 16' capacity, electric drive with controls, includes 24" x 20' belt conveyor, needs maintenance 719 Moore Tilt Hoist SN: 390-104, 3 arms, 6' x 11" capacity, 2 HD Tulsa winch, electric drive, working condition 720 Tilt Hoist 3 arm, 8' x 9' capacity, HD Tulsa winch, electric drive, in good condition 721 Tilt Hoist 4 arm, 4' x 12' capacity, Falk gear drive, electric drive, in good condition 722 Tilt Hoist 3 arm, 6' x 12', HD Tulsa winch, electric drive, in good condition 723 Tilt Hoist 3 arm, 8' x 12' capacity HD Tulsa winch, electric drive, fully dismanted, in good condition 724 Merchandiser Saw 60" blade capacity. Solid piece! 725 Jacobson Blower Model: 3011-T, SN: 24383, 10" x 20", 25 hp 3 ph 726 Husk* 56" bottom blade, 40" top blade, off bearing belt, type: K3VL40/B hydraulic pump, line shaft ready, in good condition 727 McDonough Band Wheels* 6' D x 10" W, 1" band, in good condition 728 Husk* 7' D x 13" W, top wheel: 1 1/4" band, bottom wheel: 1 1/2" band, includes shaft and mounting brackets, pulley, in good condition. 729 Heardrig Bands* (6) 436", (6) 392" 730 Dodge Reduction Gear* SN: BT184002168, ratio: 141: 28:1, input speed: 1750 rpm, output torque: 123, 914 in-lb max, input power 24 hp max, output shaft 4" x 8.27", A1 mounting. New in crate! 731 Upcut Chopsaw Pneumatic foot petal, no blade, electric drive, in good condition 732 Cyclone 48" x 60", 9" inlet, in good condition 733 Steel Band Chopper 1 hp 1 ph, get rid of your steel banding quickly, in good condition 734 Steel Band Chopper 1 hp 1 ph, get rid of your steel banding quickly, good condition 734A Hershberger Slab Saw Mechanical, 36" insert tooth blade, 18' infeed, line shaft ready, new in Feb. 2022, in good condition 735 Brewco Resaw Model: BBBH, SN: BB2H722, 4H band, 8" x 16" capacity, 3/4" band wheels, hydraulic drive on feed and return belt, bands are line shaft, in good condition 736 Fast Line Resaw Model: FLR1204, SN: 12102-93, 121202-96, 2 head, horizontal band, 20" x 14' belt conveyor, no band wheels, 1 head has wheel spindles, parts machine 737 MW Resaw Single head horizontal 7" x 12' belt conveyor, 20' band wheels, no drive. Working condition 738 Wadkin Bandsaw Resaw Model: PBR H/D, SN: 986, vertical bandsaw, 28" band wheel, tilt bed, 12" capacity, 220 VAC, 3 ph, 50 A, 21 kw, 60 H2, power feed, table is broke off, otherwise in good condition 739 Baghouse 40' x 40' x 9', in good condition 740 1993 Hydraulic Tank 250 gallon, includes vane type pump, 2 hp 3 ph electric motor. Air tank converted to hydraulic tank, in good condition 741 1975 Ingersoll Rand Compressor Model: 25305, SN: 53087, type 30, 2 stage, 80 gallon, 5 hp 3 ph, horizontal, in good condition 742 1999 Air Tank 150 gallon vertical, was used in last 6 months, in good condition 743 1987 Air Tank 200 gallon vertical 744 1954 Ingersoll Rand Compressor Model: 15T, SN: 30T 306612, type 30, 2 stage pump, horizontal, 15 hp 3 ph, has cooling fins, in good condition 745 1986 AJAX Compressor Vertical 60 gallon, twin cylinder pump, 5 hp 1 ph electric, needs new air intake filter hosing otherwise in good condition 746 1976 Air Tank 135 gallon vertical, in good condition 747 1999 Ingersoll Rand Compressor Model: 3000, SN: 00010314, 120 gallon horizontal, 2 stage compressor, cool radiator, 30 hp 3 ph electric, in good condition 748 Blower Fan 18" x 58", 18" x 19" outlet, no inlet plate, motor mount, no drive, in good condition 749 2009 Koger Air Blower Fan Model: CCW-360, SN: KAF-7009, size: 21, 17" x 54", 16" RD inlet, 17 1/2" x 20" SQ outlet, no drive, in good condition 750 GP Fan Dust Blower SN: J-3253, size: 276, 29 1/2" RD inlet, 20 1/2" x 30' outlet, 2 hp 3 ph electric, in good condition 751 Air Lock 14" x 27", HD, stainless steel paddles and inner housing, 7.5 hp 3 ph with reduction gear, in good condition 752 Air Lock 10" x 18" HD, stainless steel paddles and inner housing, motor mount, no drive, in good condition 753 Air Lock 12" RD inlet and outlet, 3 hp 3 ph with reduction gear, in good condition 754 Twin City Fan SN: 81-32667-2-1, size: 28, type: JBA, 16" RD inlet, 16" RD outlet, 125 hp 3 ph electric, in good condition 755 New Klima Blower Fan 14' x 36" D, N motor 1800 rpm, 240 volt, 3 ph 755A New Klima Blower Fan 14' x 36" D, N motor 1800 rpm, 240 volt, 3 ph 755B New Klima Blower Fan 14' x 36" D, N motor 1800 rpm, 240 volt, 3 ph 755C New Klima Blower Fan 14' x 36" D, N motor 1800 rpm, 240 volt, 3 ph 755E New Klima Blower Fan 14' x 36" D, N motor 1800 rpm, 240 volt, 3 ph 755F New Klima Blower Fan 14' x 36" D, N motor 1800 rpm, 240 volt, 3 ph 756 Air Lock 12" RD inlet and outlet, 2 hp 3 ph with reduction gear, some wear 757 Air Lock 12" RD inlet and outlet, motor mount, no drive, includes 24" to 12" reducer, in good condition 758 Dust Blower 6" x 20", 7" RD inlet and outlet, electric drive, hp unknown, in good condition 759 Buffalo Blower SN: 84307562, 60-3 CB, HD pressure blower, 12" RD inlet and 7" x 10" outlet, 40 hp 3 ph, in good condition 760 Dust Blower 4" x 16", 5" inlet, 2 hp 1 ph electric, in good condition 760A Dust Blower 22", 15" outlet, 14" inlet, new shaft and bearings, belt drive, good condition 760B Dust Pipe (5) 10" x 15', 75' total, HD, in good condition 761 Air Tank 500 gallon horizontal, in good condition 762 Air Tank 80 gallon vertical, in good condition 763 1945 Air Compressor 135 gallon horizontal, 1 stage pump, 5 hp 3 ph electric, in good condition 764 Donaldson Dust Bin 36" x 40" x 96", 5 hp 3 ph blower, 8 in.sq. outlet, some wear 765 Fulghum Chip Blower 16" x 44", 40 hp 3 ph electric, good condition 766 Twistair Compressor Model: TA-030BB141TH, SN: M39908, max pressure: 125, 460 volt, 150 gallon horizontal, 30 hp 3 ph, includes starter 767 Phelps Chip Blower Model: MH Chip, SN: 94417, 1800 rpm, 15" x 40", in good condition 768 Phelps Chip Blower 15" x 25", motor mount, in good condition 769 Phelps Chip Blower 15" x 25", motor mount, in good condition 770 Morbark Chip Blower 16" x 42", 18" x 14' discharge pipe, mounting plate, no drive, in good condition 771 Chip Blower 15" x 26", no drive, in good condition 772 Morbark Chip Blower 10" x 28", 12" x 8' discharge pipe, mount plate, 10 hp 3 ph electric, in good condition 773 Chop Saw 34" blade capacity, 26" x 90' belt conveyor, line shaft ready, no blade, in good condition 774 PH Double End Trim Saw 30" blades, 8' cut capacity, 11' log trough, hydraulic reservoir 5 gallon, no drive, in good condition 775 Roll Case (2) 5' x 10', electric drive, in good condition 776 Roll Case 6' x 9', 3 strand, pop-up transfer, hydraulic drive, no drive on rolls, in good condition 777 Morbark Tank 20" x 29" x 48", was set up with Morbark chip pac, (1) single valve control, (1) 2 valve control, like new condition 778 Corley Gang Edger 6" x 24" capacity, 5 fixed blades, 2 moveable, power infeed and outfeed, electric drive, 30" x 22', 6" x 22' tail belt, electric drive, 6' x 10' roll case with 2 strand pop up transfer (edger infeed) electric drive, 2 skids of extra blades and spacers, in good condition 779 Schurman Gang Saw Model: 10.SBA48, SN: 3014, 11" x 48" capacity, 23 blades installed, power infeed and oufeed, no drive, line shaft ready, outfeed has minor fire damage 780 Roll Case 65" x 20" roll case, 6 strand pop up transfer, idler end, no drive on transfer, hydraulic drive on roll case, was used with Schurman Gang saw (lot 779) 781 Cook Gang Edger 6" x 42" capacity, 40" x 96' outfeed, line shaft ready, extra blades and spacers, no blade guides, 4 fixed and 1 moveable, in good condition 782 Euford Edger 6" x 36" capacity, electric drive, two independent sliding arbors, lasers, includes 10' infeed and 20' tailing belt, 9 extra blades, 18" diameter, in good condition 783 Cornell CLB Saw Model: CLB-BX, SN: 00-2-8-86, 10" thick capacity, linear positioning infeed, electric drive, includes 5' x 10' 4 strand transfer, 4' x 10' 3 strand tilt transfer, 30" x 10' roll case (infeed) electric drive, all controls, in good condition 785 Gang Saw 6" x 40" capacity, 5 fixed blades, 36" x 44" infeed, line shaft ready, in good condition 786 Corley Gang Edger SN: 66-HP-004, 6" x 20" capacity, 54" x 96" infeed, 54" x 34" outfeed, electric drive on infeed, no drive on gang, needs rebuilt 787 Brewer Gang Saw 6" x 32" capacity, (1) 75 hp 3 ph, 4 fixed blades, with sizer ready, 30 hp 3 ph, in good condition 788 Shurman Gang Edger 6" x 48" capacity, 4 fixed and 1 moveable blade, 4' x 7' outfeed, 4' x 8' infeed, line shaft ready, in good condition 789 Ukiah Edger Model: 10BAS, SN: 8242, 10" x 27" capacity, 5 fixed, 2 moveable, 150 hp 3 ph, in good condition 790 Cornell Gang Edger Model: 660ED, SN: 252-1-5-89, 8" x 27" capacity, 5 fixed, 2 moveable, 150 hp 3 ph, working condition 791 Brewco Gang Sizer SN: HNEH0002, 4" x 12" capacity, linear positioning gang, linear positioning sizer, hydraulic drive on infeed, electric drive on gang, in good condition 792 Debarker Rosser head, flat track electric drive on head, includes barn sweep waste conveyor and controls, needs rebuilt 793 Fulghum Debarker Model: 618, SN: F1-00-440, Rosser head, electric drive on head, 14' log capacity, controls, another Fulghum debarker for parts, needs rebuilt 795 Debarker SN: F161332, Rosser head, electric drive on head, slant track, 16' capacity, cab and controls, needs rebuilt 796 Hosmer Debarker Model: V-206-H, SN: V.206.135, Rosser head, electric drive on head, 16' capacity, complete unit, needs rebuilt 797 Morbark Debarker Model: 636, SN: 285, post peeler type, electric drive, no controls, needs rebuilt 798 Debarker Rosser head, electric drive on head, flat track, pentagraph, no cab or controls, needs rebuilt 799 HMC Debarker Model: V-206, SN: 9422, Rosser head, electric drive on head, flat track, cab and controls, complete unit, needs rebuilt 800 Precision Debarker Electric drive on head, flat track, waste conveyor, cab and control, complete unit, needs rebuilt 801 Mellot Debarker* Model: 200, SN: 872001378, type: 8, Rosserhead, electric drive on head, needs rebuilt 803 HMC Debarker Model: V206, SN: 196297, no head, slant track, frame and bulls wheels only 804 Hosmer Debarker Model: V-206-HL, SN: V.206.269, Rosser head, electric drive on head, electric drive on bull wheels, electric over hydraulic on power feed, controls, includes barn sweep waste conveyor, needs rebuilt 805 1995 Mellot Debarker Model: 200, SN: 94200311, Type: 10 Rosser head, all hydraulic, pantograph, no cab or controls, needs rebuilt 806 2005 West Plains Roll Case Model: WPRS-RC, SN: 1433, 15" x 14' roll case, 4 1/2" rolls, electric drive, was used with a resaw system, almost new condition 807 Roll Case 53" x 16', 8 1/2" rolls, 4 pop up transfer, in good condition 808 Belt Conveyor 16" x 15', electric drive with reduction gear, in good condition 809 Belt Conveyor 14" x 10', waste belt, incline, electric drive, in good condition 810 Waste Conveyor 10" paddles, 48' long, WS78 chain, with incline, electric drive, in good condition 811 Waste Conveyor 11" ladder back chain 812 Log Trough 6" ladder back chain, 40' long, 5' tall, no drive, in good condition 814 Waste Conveyor 13 1/2" paddles, 38' long, includes 11' legs, electric drive with right angle gear reducer, 31-8 815 Belt Conveyor 38" x 17', no drive, needs new belt, in good condition 816 Meadows Belt Conveyor 32" x 60" belt conveyor, 32" x 96" panning, used as outfeed on edger, no drive, has some wear but in good condition 817 HMC Drop Belt Model: BC96, SN: 3185663, 30" x 13', no drive 818 Concave Belt Conveyor 33" x 36', electric drive 819 Belt Conveyor 14" x 10', electric drive, in good condition 820 Belt Conveyor 8" x 17', no drive, in good condition 821 JB Hammermill Size: 20, Stock: 1708, Pto belt drive, includes 7 screens, cyclone, bagger chute, bags, and belting. Always stored inside, good condition 822 Blower Fan 12" x 36", 14" inlet, 12" outlet, line shaft ready, in good condition 824 Mellot Log Turner 36", chain type hydraulic drive, in good condition 825 Renco Log Turner 36", chain type hydraulic drive, in good condition 826 Mellot Log Turner 36", chain type hydraulic drive, in good condition 827 Belt Conveyor 6" x 28', electric drive, in good condition 828 Belt Conveyor 8" x 14' belt with 6" x 11' roll case with tilt, set up as on out feed for edger, in good condition 829 Belt Conveyor 4" x 12' edger outfeed, hydraulic drive, in good condition 829A Vibrating Conveyor 18" pan, 6" sides, 65' long, bar screen, electric drive, in good condition 830 Webster Vibrating Conveyor Model: FSM, SN: 842-1863-5, size: 18-24, 40' long with chipper infeed, hydraulic drive, in rough condition 829B Belt Conveyor 13" x 29' 3" sides with trash hopper, no drive, in good condition 831 Belt Conveyor 14' x 27', electric drive, needs new belt, in good condition 832 Dead Rolls (1) 44" x 64", (1) 44" x 120", (1) 46" x 76", in good condition 834 Edger Infeed 8" x 24" rolls, 10' long, linear positioning infeed, hydraulic drive, heavy duty, in good condition 835 Roll Case 8 1/2" x 42" rolls, 14' long, frame is 22' x 8', includes 4 strand board kicker, hydraulic drive, in good condition 836 Roll Case 4 1/2" x 18", 16' long rolls, are on an angle, hydraulic drive, in good condition 837 Tilt Dead Rolls 2" x 18 1/2" rolls, 20' long, in good condition 838 Dead Rolls (1) 2" x 26" rolls, 6' long, (1) 2 1/2" x 6", 11' long, in good condition 839 Roll Case 7" x 48" rolls, 13' long with reduction gear, no drive, HD, in good condition 840 Resaw Return 6 1/2" x 20" rolls, 2 strand pop-up transfer, hydraulic drive, no drive on rollers, in good condition 841 Roll Case 20" x 5', electric drive, in good condition 842 Roll Case 4" x 10", 8' long, no drive, in good condition 843 Roll Case 4 1/2" x 12" rolls, 20' long, hydraulic drive, includes 3 arm board kicker, pneumatic, in good condition 844 Unscrambler 5 strand, 8' x 11'6", WS78 chain, no drive, in good condition 845 Unscrambler 5 strand, 8' x 13', 7'6" tall, 81X chain, electric drive, in good condition 846 Roll Case 6 1/2" x 36" rolls, 16' long, rolls are on slant, includes drive for 6 strand transfer, no idler, electric drive, in good condition 847 Unscrambler 7 strand, 10' x 16', 9'3" tall with 6" x 24" rolls, rolls at a slant, electric drive, in good condition 848 Dead Rolls 6 1/2" x 64 x 21' long, in good condition 851 Catwalk 33" x 37', in good condition 852 Aluminum Grating (10) 1 3/4" x 21" x 34 3/4", 1 3/4 x 19 x 41, 1 3/4" x 25" x 35 3/4, 1 3/4 x 14 1/2 x 21", in good condition 853 CTR Delimber 42" buck saw, in good condition 854 Spiral Staircase 80" D x 11' T, in good condition 855 3 Strand Log Deck 10' x 17' log deck with Tulsa winch drive, stop'n'load 856 Log Trough 30' long, electric drive, heavy duty, 5" wide chain for narrow logs, in very good condition 857 New Stock Equipment 6 Gear Box 1887 rpm, 86. 43:1 ratio 858 Transfer Deck 10' x 19'6", 3 strand, electric drive 859 4 Strand Green Chain 23' long, C-188 chain, electric drive, no drive shaft 860 Transfer Deck 6 Stand 14' x 26' long, in good condition 861 2 Strand Transfer Deck 3' wide x 24' long, electric drive, in good condition 862 4 Strand Log Deck 9'6" wide x 24' long, rooftop chain, in good condition 863 2 Strand Transfer Deck SN: 9998, 4'6" wide x 21', electric drive with tulsa winch, in good condition 864 6 Strand Transfer 12 1/2' wide x 7' long, electric drive, 81X chain, air operated, cant stops, in good condition 865 4 Strand Transfer Deck H78 chain, 11'6" wide x 40' long, gear box drive, in good conition 866 5 Strand Log Deck 13'6" wide x 50' long, electric drive, heavy duty, in good condition 867 4 Strand Transfer Deck 13' wide x 8' long, electric drive, in good condition 868 5 Strand Log Deck SN: 9848, 17' wide x 38' long, stop'n'load, electric gear box drive, in good condition 869 4 Strand Transfer Deck 11' wide x 27' long, hydraulic drive, H-130 chain, cant stops, in good condition 870 6 Strand Transfer Deck Model: Hosmer, 14' x 10' long, electric drive, manual stops, in good condition 871 4 Strand Transfer Deck 12' wide x 23', with drive 872 6 Strand Transfer Deck 13'5" wide x 10' long, electric drive 873 4 Strand Log Deck Chain included, no drive, has drive shaft, 13' wide x 20' long 874 3 Strand Green Chain 10'8" wide x 30', gear box drive, C-188 chain, in good condition 875 4 Strand Transfer Deck SN: 9040, 10'6" wide x 38' long, electric drive, H78 chain, in good condition 876 4 Strand Grading Deck SN: 9981, 13' wide x 20' long, C55 chain, electric drive, in good condition 877 4 Strand Transfer Deck SN: 9753, 40' long, electric S-drive, 81X chain, good chain 878 5 Strand Green Chain 14' wide x 82' long, electric drive, side-roller tape, chain on outside strands, in good condition 879 4 Strand Transfer Deck SN: 9973, 9'6" wide x 24' long, rooftop chain, electric tulsa winch drive, in good condition 880 3 Strand Transfer Deck 8' wide x 70' long, electric drive 881 2 Strand Transfer Deck 5'6" wide x 10' 10" long, has cant stop, hydraulic stop 882 Green Chain 10' x 17' 4 strand, (1) 8LX chain, 3 rooftop chain, in good condition 883 2 Strand Transfer Deck 29" x 25', 13' has its own drive, 12' has its own drive, hydraulic drive, was used to transfer from chopsaw to gangsaw, in good condition 884 Fuel Tank 3' x 5', no leaks, 300 gallon, in good condition 885 Saw Dust Bin* 10' x 10' x 16', 24" rack/pinion slide gate, includes stirrator, electric drive, in good condition 886 Doyle Log Scale* 48" log scaler, in good condition 887 Doyle Log Scale* 48" log scaler, in good condition 888 Doyle Log Scale* 36" log scaler, in good condition 889 Log Decimal Scale* 36" log scaler, in good condition 889A Doyle Scribner* 36" log scaler, in good condition 890 Lumber Grader* 36", 3 line, in good condition 891 Lumber Grader* 36", 3 line, in good condition 892 Lumber Grader* 24", 4 line, in good condition 893 Hydraulic Tank* 40 gallon, was used on feed truck, in good condition 894 PTO Shaft* 8 series, 8" x 46" 1 3/8" 21 Spl QD BE, all purpose driveline, includes 2 jack shafts, 2 3/16" shafts, B6 15" pulley, B6 9" pulley, in good condition 895 Lincoln Electric Motor* 50 hp, 1765 rpm, frame: 326T, includes C4 9" pulley, in good condition 896 Lincoln Electric Motor* 75 hp, frame: 405T, with B4 12" pulley, includes motor mount, in good condition 897 Reduction Gear* 1 7/8" output shaft at 14 rpm, includes c-phase mount 2 hp electric motor 3 ph, in good condition 898 Electric Motor* 5.5 hp, 1750 rpm, frame: 213T, B2 3 1/2" pulley, in good condition 899 Lincoln Electric Motor* 15 hp, 1750 rpm, frame: 254T, B2 10" pulley, in good condition 900 Pallet of Disconnects* 3 ph disconnects, (2) 30 amp, (1) 60 amp, (1) 100 amp 903 Hydraulic Reservoir* 21" x 59" x 29", in good condition 904 Hydraulic Pump* (1) vane type, (1) pressure compressor with 60 hp 3 ph electric motor on frame, in good condition 905 Clarage Dust Blower* Number 25, 20" x 58", 24" Rnd inlet, 21" x 22" outlet, belt drive, some wear 905A Air Intake Valve* 20 1/2" x 22 inlet, 24" rd outlet, 50" tall, in good condition 905B Cyclone* 8' x 31', 24" inlet, 26" x 44" air return, 16" outlet, access door, in good condition 905C Blower Pipe* 24", (1) 90 elbow, (2) 45 degree elbows, (1) 10', (1) 51", (1) 34", in good condition 906 Heat Exchanger* Model: AOVHM-40, SN: C132526, 10" x 41 1/2" x 38", 300 psi, hydraulic drive on fan, includes stand, in good condition 907 Belt Conveyor* 36" x 42', 36" tall, electric drive, in good condition 908 Cyclone* 42" x 9', 10" inlet, 16" outlet, stand included, in good condition 909 Rotex Shaker Screen* 5' x 14', 17' overall, hp unknown electric drive, used to separate chips from sawdust, in good condition 910 Cyclone* 6' x 12'8", 10" inlet, 18" outlet, in good condition 911 Sawdust Blower* 9" x 28", 8" inlet, 8" outlet, motor mount, no drive, some wear 912 Allis Chalmers Silage Blower Electric drive, includes 48' of 8" pipe, in good condition 913 Conveyor* 5' x 18', 4' tall capacity, 9'7" overall height, no drive, some wear but in good condition 914 Clipper Belt Lacer SN: 123644, No. 3"-6" 915 Clipper Belt Lacer SN: 76205, No. 3"-6" 916 Hanchett Swage and Armstrong Setter Swage, No. 55 setter, 6900 B, in good condition 917 Hanchett Swage and Setter SN: 5058, setter No. 8 band shaper, in good condition 918 Manual Saw Filer In good condition 919 Jockey Grinder Electric drive, in good condition 920 Jockey Grinder Electric drive, in good condition 921 Makita Grinder Electric drive, in good condition 922 Steel Strapping Tools In good condition 923 Steel Strapping Tools In good condition 924 Steel Strapping Tools In good condition 925 Steel Strapping Tools In good condition 926 Steel Strapping Tools In good condition 927 Steel Strapping Tools No tensioner, in good condition 928 Pallet Nailer (2) Bostich pneumatic nailers, in good condition 929 Pallet Nailer (1) max good condition, (1) Bostitch, bad seal 930 Simonds Teeth Shanks (50) F-8, (50) B-8, in good condition 931 New Simonds Saw Bits (300) 9/32, carbide dipped 932 New Treated Yellow Pine Posts (100) 3 1/2" x 7' 933 New Treated Yellow Pine Posts (100) 3 1/2" x 7' 934 New Treated Yellow Pine Posts (100) 3 1/2" x 7' 935 New Treated Yellow Pine Posts (100) 3 1/2" x 7' 936 New Treated Yellow Pine Posts (100) 3 1/2" x 7' 937 New Treated Yellow Pine Posts (100) 3 1/2" x 7' 938 New Treated Yellow Pine Posts (100) 3 1/2" x 7' 939 New Treated Yellow Pine Posts (100) 3 1/2" x 7' 940 New Treated Yellow Pine Posts (100) 3 1/2" x 7' 941 New Treated Yellow Pine Posts 7 1/2" x 8' 942 New Treated Yellow Pine Posts 7 1/2" x 8' 943 New Treated Yellow Pine Posts 7 1/2" x 8' 944 New Treated Yellow Pine Posts 7 1/2" x 8' 945 New Treated Yellow Pine Posts 7 1/2" x 8' 946 New Treated Yellow Pine Posts 7 1/2" x 8' 947 New Treated Yellow Pine Posts 7 1/2" x 8' 948 New Treated Yellow Pine Posts 7 1/2" x 8' 949 New Treated Yellow Pine Posts 7 1/2" x 8' 949A New Farm Gate 50” x 16’ , 1 ¾” round tube 14GA, includes hangers 949B New Farm Gate 50” x 16’ , 1 ¾” round tube 14GA, includes hangers 950 Cant Stacker/Sorter 7' x 20'6", 10'4" tall, no drive, like new condition 951 Aluminum Waste Conveyor 5" x 16', single chain, rubber paddles, no drive, in good condition 952 Roll Case 11" x 36" rolls, 5 rolls, 14'3" long, hp, no drive, in good condition 953 Webster Vibrating Conveyor 17" pan, 6" sides, 21' long, burr screen, chipper infeed, no drive, in good condition 954 Jay Bee Hammer Mill 13 1/2 x 19 1/2 intake 955 Roberts Mill Hammermill SN: 761, 3600 rpm, top feed style, 60 hp 3 ph electric, just came out of production, in good condition 956 Aerovent Blower SN: 8705494-001, 17" x 48", top discharge, 20 hp electric drive, 20" intake, 17" x 18" outlet, in good condition 957 Lumber Cart* 30" x 60" x 45", rubber wheels, in good condition 958 Lumber Cart* 27" x 46" x 48", swivel wheels on one end, in good condition 959 Lumber Cart* 42" x 84" x 48", stop on one end, in good condition 960 Lumber Cart* 42" x 84" x 48", stop on one end, in good condition 961 Lumber Cart* 42" x 96" x 48", stop on one end, in good condition 962 Lumber Cart* 42" x 96" x 48", stop on one end, in good condition 962A Lumber Cart* 3ft x 6ft, railroad cart style 962B Lumber Cart* 3ft x 6ft, railroad cart style 963 MMT Notcher* Model: 150A, SN: 247, single head, 15 hp 3 ph, electric drive, in good condition 964 Belt Conveyor* 10" x 35', electric drive, in good condition 965 Belt Conveyor* 16" x 24' cleated belt, hydraulic drive, dust cover. Has some wear but in good condition 966 Baker Resaw Parts* Belt, arbor, in good condition 967 Jones Saw Grinder* Electric drive, includes holder for electric grinder, band saw tooth setter, in good condition 968 Banding Cart* Deluxe, on wheels, in good condition 969 Dust Blower* 11" x 40", 12" inlet, 10" outlet, 15 hp 3 ph electric, in good condition 970 Cooks Band Roller* In very good condition 971 Cooks Cat Claw Sharpener* Electric drive, in very good condition 972 Manual Strapping Tool* MIP 499, in good condition 973 Manual Strapping Tool* MIP 499, in good condition 974 Manual Strapping Tool* Mul-20, used for steel strapping, in good condition 975 Manual Strapping Tool* Mul-20, used for steel strapping, in good condition 976 Manual Strapping Tool* Mul-20, used for steel strapping, in good condition 977 Manual Strapping Tool* Mul-20, used for steel strapping, in good condition 978 Bosch Strapping Tool* Battery powered, includes 2 batterys and charger, plastic only, in good condition 979 Bosch Strapping Tool* Battery powered, includes 2 batters and charger, plastic only, in good condition 980 Steel Banding Clamps* 1/2" clamps, 3/4 box full, includes 1 manual clamp clincher, in good condition 981 Plastic Strapping* 1/2" x 3/4 full roll, in good condition 982 Cant Edger* 4" x 20" capacity, 4 fixed blades, electric drive, hydraulic drive on infeed and outfeed, self contained hydraulic pak, shop built, box of extra blades, in very good condition 983 Belt Conveyor* 26" x 42', no drive, in good condition 984 Post Pointer* 2" D capacity, electric drive, includes hydraulic pak and disconnect, in good condition 985 Banding Cart* Includes some steel banding, in good condition 986 Banding Cart* Almost new and in good condition 987 Steel Banding* 5/8" x full roll, almost new condition 988 Fulghum Chip Screen* 5x5, electric drive, includes cyclone, last in production 2021, in good condition 989 Morbark Chipper* Model: 348, SN: W359, 3 knife, RH, top discharge, no drive, last in production 2021, in good condition 990 Sawdust Dryer* Furnace 8' x 14', 8'6" tall, weight: 26000 lbs., 3 infeed augers, electric drive, fully line with heat bricks, blower, 38" x 16' pipe lined with heat bricks, 8' x 24' sawdust tumbler, 40" inlet, 24" outlet, electric drive, weight: 22000 lbs., total length: 30', 38" x 8' pipe lined with crete, 10000 lbs, (as is) 991 Belt* 30" x 142', 1/8" thick, in good condition 992 Roll Case Transfer* 4" x 26" rolls, 11' long, 5 strand pop up transfer, #40 chain, all mechanical, line shaft ready, includes 24" x 10' belt conveyor with hold down, no drive, in new condition 993 Steel Platform* 5'6" x 11'2", includes steps, 42' railing, in good condition 994 Froedge Deduster* 4" x 7" capacity, line shaft ready, in good condition 995 Shipping Container* 8' x 8' x 20, used and in good condition 996 Shipping Container* 8' x 8' x 20, used, new paint inside, in good condition

Listing Information

Bright Star is excited to provide a consignment auction to serve your area. Our goal is to provide sellers with an easy option to turn their unused equipment into cash. We provide cutting edge marketing to earn sellers top dollar for their equipment. Buyers can be expected to be treated fairly and with absolute transparency and integrity. All items sell absolute* No Minimums * No Reserves * We look forward to working with you.

Information Lot
Auction Agent: Mervin Lehman 260-599-8369
Accepting consignments of quality equipment! Specializing in all heavy equipment, including construction, excavating, sawmill, forestry, trucks and trailers. All items sell absolute* No Minimums * No Reserves *Call your auction agent today to capitalize on free marketing for your equipment. - - Showcase Equipment is having an inventory reduction auction and will be selling approx. 30% of their inventory. This will be a superb opportunity to purchase quality sawmill equipment that requires no rigging. We are also accepting consignments to add to this auction. The auction will be on the 15th with the expo starting on the 14th which features live lumber sawing demos with steam engines, vendor booths, and a spark show at dusk. We will be selling 2 hours’ worth of new cordless tools on Thursday evening. Food will be available. Plan to attend!

Preview Information
Monday to Friday from 7AM to 3PM. Contact Mervin to set up an appointment 260-599-8369
Location of auction: 206 E Vine St., Wolcottville, IN 46795

Loadout Information
Free loadout on Saturday Sept 16 from 8 AM to 1 PM and for 2 weeks following the auction. Starting Oct 2nd, by appointment and for a $25 per lot loadout fee. Any items not picked up in 30 days become the property of Showcase Equipment. Contact Mervin 260-599-8369

Payment Information
Payment terms: 7% sales tax, 10% Onsite Buyers Premium, 13% Buyers Online Premium. Cash, check, wire transfer. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice. Onsite buyers, payment is due the day of the auction. If onsite bidders wish to send a wire and still be assessed only the onsite buyer’s premium, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction.

CAT 390F L Hydraulic Excavator 1:50 Scale Replica - Die Cast Metal
Have fun buying a high-quality, die-cast toy! All proceeds including buyer's premium will go to Feed My Starving Children (FMSC) which is a Christian nonprofit dedicated to seeing every child and person around the world healthy, nourished and whole in body and spirit. Bright Star will pay for standard shipping and handling to the 48 contiguous states for buyers of this lot.
https://www.youtube.com/watch?v=jYATxeDmuzM&t=8s

Heavy Equipment Key Set 36 Keys
Shipping available for $20

Manual Sealless Steel Strapping Tool
Model A333, works for 1/2" 5/8" or 3/4" banding, new in box. Shipping available for $30

510

Logging Cart
Draft horse logging cart, steel wheels, air tires are available if so desired, new condition

511

John Deere Skidder
SN: DW540EC548898, meter reads: 27020, cable skidder, 1/2" cable, 7' blade, 23.1-26 tires, good strong machine, in good condition

512

John Deere Skidder
Model: JD740, grapple and cable, 3/4" cable, 112" blade, 30.5L-32 tires, rotary grapple, enclosed cab and heat, 2 way blade, in very good condition

520

Equipment Trailer
102" x 18', 5' beaver tail, double ramps, tandem dually, 10,000 lb axle, air brakes, 14" I beam frame, pintle hitch, single jack, needs new wood, 8.25/R15 tires, in good condition. No title, bill of sale only.

521

2015 PJ Gooseneck Trailer
VIN: 4P5LD2524F3012947, 102" x 18'8", 5' beaver tail, double ramps, tandem dually, ST235/85R16 tires, spare, toolbox, hydraulic brakes, 10000 lb axles (dexter), stake buckets, double jack, road ready, in good condition. Has title.

522

Ditch Witch 3700DD Trencher
SN: 3T0365, Meter reads: 1994 hours, 64" 6 way blade, 6" x 36" trench cut, pto ROPS, 2 new tires, has leak in transmission, operates as it should. In good condition

523

Trailer
6' x 11' tilt bed, single axle, brakes are inoperable. In good condition. No title, bill of sale only

527

Loader Forks
JRB 4' long. In good condition

536

Loader Forks
12' x 43", in good condition

528

New Skid Steer Bucket
72", chain ready, by Trailside Metal Works

529

New Skid Steer Bucket
78", chain ready, by Trailside Metal Works

529B

New 83" Steinsammler

529C

New 83" Steinsammler

530

Loader Forks
12' x 43", in good condition

531

La-Mar Log Grapple
SN: 0026, skid loader attachment, 1/2" cable, variable control on cable, quick release winch, like new condition

532

Crawler Loader Bucket
1 3/4 cu.yd. top pivot style, needs new hydraulic hoses, in good condition

533

New Holland Hoe Bucket
34" wide, in good condition

534

Logging Forks
Floating forks skid loader attachment, 2” x 6” x 48" long, 12000 lb. capacity, includes welded on chain hooks, welded 2" ball hitch, back blade to keep your trail graded

535

New Skid Loader Attachment Grader
72" wide x 64" long x 18" tall, 2 adjustable blades, dual attachment plates

535A

New Pull Type Grader
Lawn mower or mini pony, 42" wide x 48" long x 8" tall, dual hookup

535B

New Grader
7' grader, has hookup on both ends, lightly used condition

536

Prentice 325 Knuckleboom
SN: 1S9HD4520PS239207.
Meter reads: 17,201.
Engine: Cummins.
Fuel type: Diesel.
Continuous Grapple: Yes.
Trailer: Yes, new wiring, lights, and road ready.
Delimber: No.
Bucksaw Hookups: Yes.

Features and Notes: 11R22.5 tires, new battery, has leaks in several cylinders, runs and operates as it should

540

2023 New/One-trip 20' Standard Container
RXCU1023851, 20' long, double doors on one end

541

2023 New/One-trip 20' Standard Container
HPCU2271820, 20' long, double doors on one end

551

New Aluminum Fuel Tank
150 gallon tank, includes stand and hose.

552

HMC Rosser Head Debarker
Model: V206, SN: 1789-20, 20' log capacity, slant track, fully hydraulic, new glass in cab, pantograph, no controls in cab, reconditioned by seller, in good condition. Contact Myron Nissley with any questions 574-536-2481

553

Morbark Chip Pak
Model: 3-48, SN: 529, 48", RH, 3 knife, no drive on chipper or shaker, reconditioned by seller, in good condition. Contact Myron Nissley with any questions 574-536-2481

554

New Accu-Cut Edger
4" x 36" capacity, HP electric motor, plug and play

554A

2023 Timber Buddy XP380 Band Mill
John Deere 4045 PowerTech 120 HP diesel engine, fully hydraulic, 2" x 30" band wheels, 42" throat opening, 38" diameter x 24' log capacity, stationary stands. Includes log lift, mudsaw, power end feed on tapers, outfeed belt, and laser. BRAND NEW!

554B

New 2023 Pro-Cut Resaw*
Single head resaw with return, electric drive

555

New Whirlwind Cyclone
48" D, 10" inlet

556

New Whirlwind Blower
SW-12 10" inlet

557

Brand New Supreme MFG Live Roll Case
20" x 20', very heavy duty, electric drive

558

Brand New Supreme MFG Lumber Cart
Very heavy duty, 42" x 92"

558A

Brand New Supreme MFG Lumber Cart
Very heavy duty, 42" x 92"

558B

Brand New Supreme MFG Lumber Cart
Very heavy duty, 42" x 92"

558C

Brand New Supreme MFG Lumber Cart
Very heavy duty, 42" x 92"

558D

Brand New Supreme MFG Lumber Cart
Very heavy duty, 42" x 92"

558E

Brand New Supreme MFG Lumber Cart
Very heavy duty, 42" x 92"

561

New Self Dumping Hopper
3/4 yard fork lift pockets

562

New Self Dumping Hopper
1 yard, fork lift pockets

563

New Self Dumping Hopper
1 1/2 yard fork lift pockets

564

New Self Dumping Hopper
2 yard, fork lift pockets

565

New Self Dumping Hopper
2 1/2 yard, fork lift pockets

566

New Self Dumping Hopper
3 yard, fork lift pockets

567

New Self Dumping Hopper
Heavy Duty, 4 yard, fork lift pockets

568

New Self Dumping Hopper
Heavy Duty, 5 yard, fork lift pockets

569

Dynamic Grinder
Model: 5240HZ, SN 5240H21008110620, 425 HP, 1591 hours, year 2011, Volvo Penta engine, 37,640 total weight, this unit is totally portable, good running condition

571

Portable Bandmill
28" cut, 670 cc predator, 20' trave, 12 volt setworks, extra bands, in good condition

572

Cleereman Carriage
3 HB, 12' carriage, pneumatic 60' track, no setworks, in good condition

573

1996 Lane Carriage
Model: 336, SN: 56700196224, 4 hb, 14' carriage, hydraulic dogs, 10 gallon reseviour, electric drive, 60' track, working condition

574

Renco Carriage
4 HB, 20' carriage, air dogs, hydraulic setworks, 5 gallon reservoir, electric drive, working condition

575

Meadows Track and Carriage
3 HB handset, 14' carriage, husk, 60' track, in good condition

576

Helle Mill
3 HB, 14' carriage, fully hydraulic, 60' track, hydraulic pak, top and bottom blade husk, cab and controls, a complete setup log turner, in good condition

577

Renco Mill*
4 hb, 2 have air dogs, 3' x 15' carriage, 45' track, husk with Tyrone Berry drive, 56" blade, cab controls, no cab, electric drive on carriage, no drive husk, in good condition

578

Mater Carriage*
4 hb, hydraulic and air operated, 60' track, carriage feed

579

Salem Carriage*
SN: 14824991, 3 HB, 48" linear position headblocks, Tong dog, Air dogs, 15' long, 2 HB recently replaced, includes pantograph, in good condition.

580

Meadows Mill*
2 HB, electric setworks, includes 40' track, carriage drive, husk, cab and controls, in good condition

580A

Corley Circle Mill*
3 HB handset, RH friction feed, complete portable mill, 36' track, husk with 50" blade, log turner, blower, hydraulic reservoir, line shaft ready, in good condition

581

Cat Power Unit
SN: SEK79269
Meter reads: 2,523 hours
Fuel type: Diesel
Clutch: No, #1 Bell housing

Features and Notes: Oil preserve 66 psi at 650 rpm, 77 psi at 1800 rpm. A low hour engine with lots of potential! Good runner!

582

1993 Cummins Power Unit
Model: KTA19G2
SN: 61174
Meter reads: 1,443.3 hours
Engine: 37146338
Fuel type: Diesel
Clutch: No

Features and Notes: As is condition, all parts are included. As of 7/18/2023, crank shaft is still missing

583

5.9 Cummins Power Unit
190 hp, 1220 hours, electronic governor, no clutch, #2 bell housing, 11" drive, in very good condition

584

International Harvester Diesel Power Unit
Model: UD360
SN: 6660001U009575
About 210 hp, has twin disc clutch, all new filters. Good running condition

584A

855 Cummins
240 hp, clutch and radiator, 10GE pulley, runs good, but has a water leak

585

John Deere Power Unit
Model: 4045HF285.
SN: PE4045L037422.
Meter reads: 8,430 hours.
140 hp at 2400 rpm, twin disc clutch, brand new oil pump, excellent running condition

586

Brewer Transfer
3 strand, 3' x 14', C55 chain, electric drive, in good condition

587

Helle Log Deck
7 x 22, 2 strand H78 chain, with tulsa winch and hydraulic drive, stop'n'load, legs on load side are detached, in good condition

588

Brewer Unscrambler
4 strand, 6' x 7' x 4', electric drive, in good condition

589

Transfer
3' x 16', 3 strand, includes gear reducer with c-phase mount, in good condition

590

Belt Conveyor
12" x 20', no belt, includes reduction gear with c-phase mount, in good condition

591

Belt Conveyor
12" x 15', smooth belt, no drive, in good condition

592

Transfer
7" x 11", 3 strand, C55 chain, includes 3 ph 3 hp motor with gear reducer, good solid piece

593

Rees Airlock
Model: RV-16, SN: 90-620-119, 16", includes 3 ph 2 hp motor with reduction gear, in good condition

594

Steel Hopper
30" x 39" infeed, 37" tall, was used as infeed on hog, in good condition

595

Shaving Bin
5' x 5' x 9'6" tall, includes 18" x 18" slide gate, a 21" x 60" cyclone with 9" intake, in good condition

596

Montgomery Blo-Hog
5" x 10" infeed, includes 8" x 10' Webster vibrating with 6" sides, electric drive, in good condition

597

Helle Vertical Edger
2 moveable blades, 5" capacity, electric drive, in good condition

598

Helle Log Turner
3' long, chain type hydraulic drive, in good condition

599

Pallet
Carriage drive, hydraulic pump, control valve, in good condition

600

Chicago Press Brake
Model: 135, SN: L15915, 15 ton, 6" throat, 4' wide, mechanical, 1 hp single ph, no dies, in good condition

601

W.A. Whitney Punch Press
Model: 812-630, SN: 812-630-20286, 150 ton, 12" throat, 1" capacity, includes hydraulic pump with 30 hp 3 ph electric, in good condition

601A

South Bend Precision Lathe
Model: A, SN: CL 770R, 7/8" through, 30" capacity, 3 jaw chuck, threading, tool post, tooling, variable speed, electric drive, in good condition

602

Chicago Press Brake
Model: 135, SN: L-15413, 15 ton, 6" throat, 4' wide, mechanical, 3/4 hp 3 ph electric, no dies, in good condition

603

Universal Mill
Horizontal/vertical mill, 12 x 60 table, 38in travel, includes arbor for horizontal mill, power feed, in very good condition

604

Manford Mill
Model: 3KV, SN: 891117, 10" x 50" bed, manual feed, includes taper collect set and some tooling electric drive, digital readout, in good condition

605

The Porta Punch
2.75 throat opening, 13 1/4" x 7 1/2" x 3 3/4" dimensions, 31 lbs punching capacity, 13/16 round hole through 1/2" plate includes full set of dies, hydro pak, electric, in good condition

606

Heska Vertical Bandsaw
Model: ESU 6, SN: 773204, 1 1/2" x 25" band wheel tilt bed, bed has 10" travel, electric drive, in good condition

607

Bronx England Press Brake
Model: 4358, SN: 23568, type: 13, 10 ton 6" throat, 4' wide, no dies, 3 hp 3 ph electric mechanical, in good condition

608

TOS Mill
Model: FA3AV, SN: 12540, 12" x 54" bed, digital readout, power feed, electric drive, in good condition

609

Diehl Machinery double end saw
Model DE-92, SN: 73M-3240-2516, Bore and chucking machine, 7 travel, has its own hydraulics, electric drive, in good condition

610

Grob Inc. Vertical Bandsaw
SN: 10120, Type: NS18, 1 1/2" x 18" band wheel, tilt bed, electric drive, in good condition

616

Electric Motor
Weg 75, 3 ph 1780 rpm, 364/ST WT. 775

617

Reeves Reduction Gear
10/1 ratio, right angle warm reducer, in good condition

618

Electric Motor
WEG, 5 hp 3 ph 1755 rpm, 182/4T, in good condition

619

Vibrating Conveyor
2' x 10' with chipper in feed, conveyor drive, no power, in good condition

620

Vibrating Conveyor
16" x 10', 1 section only, parts only

621

Morbark Chip Blower
Model: 079, 16 1/2" x 16 1/2" outfeed, reconditioned by Showcase Equipment, no motor

628

Welding Table
3/8" x 34' x 57", in good condition

629

Engine Hoist
2T capacity, 1 is like new, in working condition

630

Couplamatic Crimper
SN: 47878, includes various fittings, in working condition

631

Pallet of Pulleys
(1) G180R with hub, (2) 2TB184, (1) 2A18.08K, (1) 2B 16", (2) 2AK104h, (1)2TB60 with hub, (2) 1B 6.8 SDS with hub, (2) 6.8 2 BSPS, (1) 4B52 SD with hub

632

Pallet of Pulleys
(1) 20-5-C with F-hub, (2) 8C10.0, (1) B6 12.5, (1) B314, (1) B218, (1) 2C10, (1) 8B 9.5, (1) 3B7, (1) 4B x 9.4, (1) 3C x 8, (1) 5B 8.0, in good condition

633

Pallet of Pulleys
(1) 6c 270 with hub, (1) 4B25OR with hub, (1) 5C 16 with hub, (1) 6C10, in good condition

634

#80 Roller Chain
Approx. 1200', 2626 lbs., this chain is lightly used, like new condition

635

Pallet Jack
(1) 27" x 48", 5500 lb. capacity, (1) 21" x 45", 2200 KG capacity, in good condition

636

Pallet Jack
(2) 21" x 45", 2000 KG, in good condition

637

Lumber Racks
(2) 3' x 5' x 4', (1) 3' x 80" x 44", in good condition

638

Cornell Mud Saw
6' at pivot, electric drive, no blade, in good condition

639

Moulder Infeed
6" x 6" capacity, electric drive, like new condition

640

Electro Hydraulic Power Unit
SN: IN45224, GPM260, pump: 312, 50 hp, 3 ph., 480 volt, part of lid missing, 60 gallon reservoir, in good condition

641

Hydro System Power Pak
Model: 10-V10.1P1P.1C20-1-200, SN: 3741 501127, 10 gallon capacity, 5 hp 3 ph., includes disconnect, 4 parker air valves, 4 vicker hydraulic valves, needs tune up

642

2010 Hydraulic Pump
SN: 2520V21A141CC22L, includes 5CX14 pulley, 3 hydraulic valves

643

Lift Table
54" D, 3000 lbs. capacity, pneumatic, in good condition

644

Pallet Jack
(1) 27" x 48', (1) 21" x 45", 2000 lbs. capacity

645

Pallet Jack
(2) 21" x 45, 2000 capacity, in good condition

646

Lincoln Welder
Model: AC-180-S, SN: 5879-704, Input: 1 ph, 230 volt, 60 cycle, 37 amps, Output: Max welding current 180 amps at 25 Arc volts, 115 degree Celsius rise, mas O.C.V-75 volts, duty cycle 207. In good condition.

647

Rigid Pipe Threader
SN: 2391, 2" capacity, number 208 Tri stand, no dies, in good condition

648

Misc. Belting
Used belting, various widths and lengths

649

Misc. Belting
Used belting, various widths and lengths

650

Misc. Pulleys
(1) 4C 16.0, (2) 2B x 6, (1) 2B x 4.5, (1) 2B x 7.5, (1) 2B x 9.75, (1) 2B x 8, (1) 1B x 11.5, (1) 25V x 1250, (1) 3C75, (1) 4C x 7, (2) 2B x 5.5

651

New Carolina Blower Fan
21" x 52", 12 paddles, 2 11/16" Bore

652

New Carolina Blower Fan
20" x 46", 6 paddles, 3" Bore

653

Carolina Blower Fan
21" x 52", 12 paddles, 2 11/16" Bore, in good condition

654

Carolina Blower Fan
21" x 52", 6 paddles, 2 11/16" Bore, in good condition

655

Truck Tool Box
Aluminum, fits any full size bed

656

Waste Chain
Detachable chain, includes drive and idler end, in good condition

657

Barn Sweep Chain
14" paddles, in good condition

658

Waste Conveyor Chain
16" paddles, HD, approx. 35', in good condition

659

Waste Conveyor Chain
16" paddles, HD, approx. 20', in good condition

660

Misc. Chain
H-130 roof top, drag chain with new paddles, in good condition

661

Mellot Hydraulic Pak
Single vane, 12" x 20" x 18" reservoir, 25 hp 3 ph., in good condition

662

Hydraulic Pak
Single vane, 40 hp 3 ph., 30" x 36" x 18" reservoir, in good condition

663

Hydraulic Pak
Model: PV4290R-32009, SN: 26958, Delavan pump, 25 hp 3 ph., heat exchanger, 27" x 45" x 15" reservoir, no motor on heat exchanger fan, in good condition

664

Hydraulic Pak
Single vane, 110 solenoid, 5 hp 3 ph., 10 gallon reservoir, needs maintenance

665

Radiator
43" x 43", 36" fan, 7.5 hp 3 ph. 1155 rpm, dual direction fan, in good condition

666

Continental Hydraulic Power Pak
Model: P81-81-898, 35 gallon, vane type, 7.5 hp 3 ph., in good condition

667

KL Hydraulic Reservoir
24" x 36" x 14" capacity, 10 hp 3 ph., no pump, in good condition

668

Hydraulic Unit
11" x 11" x 30" vane type, hp unknown, includes hoses and (2) 10" stroke rams, in good condition

669

Hydraulic Unit
Vane type, 10 gallon capacity, 5 hp 3 ph., in good condition

670

Rexroth Reservoir
32" x 52" x 15", in good condition

671

Hydraulic Reservoir
24" x 36" x 12" capacity, in good condition

672

Hydraulic Reservoir
16" x 24" x 16", vane type, 5 hp 3 ph., in good condition

673

Sullair Compressor
Model: 25-100 L, SN: 18697-KGD, max psi 110 screw type, 100 hp 3 ph. includes disconnect, in good condition

674

Hydraulic Unit
22" x 43" x 18", vane type, 15 hp 3 ph., in good condition

675

Hydraulic Unit
14" x 25" x 16", vane type, no motor, good condition

676

Racine Reservoir
80 gallon, heat exchanger, in good condition

677

Hydraulic Unit
12" x 29" x 16", vane type, hp unknown, heat exchanger

678

Hydraulic Pump
Vane type, 15 hp 3 ph., in good condition

679

Zabel Equipment Hydro Pak
Model: ZE30100, SN: 1506, vane type, 10 hp 3 ph., 3 variable speed controls, in good condition

680

Hydraulic Unit
10 gallon, vane type, 2 hp 3 ph., includes 3 Vickers valves, in good condition

681

Mellot Hydraulic Pak
10 gallon, vane type, 10 hp 3 ph., needs maintenance

682

Punch Press
Pneumatic clutch, 3 hp 1 ph. 220 volt, disconnect, no dies, in good condition

683

MorBark Chip-Pac
48", RH, 3 knife, no drive on chipper, in good condition

684

Precision Chipper
58", 3 knife, RH, top discharge, needs rebuilt

685

Precision Chipper
SN: C-788, 48", RH, 3 knife, top discharge, needs rebuilt

686

Precision Chipper
60", RH, 3 knife, top discharge, needs rebuilt

687

Precision Chipper
SN: C2115, 48", RH, 6 knife, top discharge, includes 2 boxes of new knives, in good condition

688

Fulghum Chipper
66", RH, 8 knife, bottom discharge, in good condition

689

Sumner Chipper/Mulcher
Model: 35, SN: 1181, 15 1/2" x 16 1/2" intake, includes 75 hp 3 ph., in good condition

690

Scan Hugger Waste Grinder
SN: 926412, type: HT 75-60-4, 915 rpm

691

Shutte Hammer Mill
Model: 1320, SN: 108, 3600 rpm, includes long sweep elbow, no drive, in good condition

692

1997 ZENO Grinder
SN: 97 A-4535, Type: ZTLL1600X, 1800, 1 extra screen, in good condition

693

Chipmaster Chipper
Model: 60R, 68", RH, 6 knife, top discharge, in good condition

694

Chipmaster Chipper
Model: 75L, SN: 69 10 03, 86", LH, 8 knife, in good condition

695

Jeffrey Hammermill
SN: 11899, size: 34WB, 12" x 36" intake, 100 hp 3 ph., in good condition

696

Soderhamn Chipper
68", RH, 6 knife, top discharge, in good condition

698

Fulghum Shaker Screen
SN: F1-R-667, 7x7, includes cyclone, 3 hp 3 ph., in good condition

699

Fulghum Shaker Screen
SN: F1-R-467, 6x6, 5 hp 3 ph., in good condition

700

Roto Flow Chip Screen
6" x 6", 2 hp 3 ph., in good condition

701

Soderhamn Chip Screen
Model: CS-25, SN: 622, 5x5, cyclone, 2 hp 3 ph., needs maintenance

702

Soderhamn Chip Screen
Model: CS-27, SN: 268, 7x7, no drive, in good condition

710

Irvington Moore Trimmer
Drop saw trimmer, 18' capacity, 40 hp 3 ph., this unit could be line shaft ready, extra blades, chain included, in good condition

711

Morris Drop-Saw Trimmer
18' capacity, 9 individual electric motors, 8" thick capacity, includes drive shaft and chain, no idler, working condition

715

Double End Timmer
9" x 52" capacity, (2) 15 hp 3 ph., has drive but no idlers, in good condition

716

Double End Timmer
9" x 22' capacity, (2) 7.5 hp 3 ph., includes all controls, hydraulic pak, everything intact, needs maintenance

717

Double End Timmer
Model: K-25, Newman 9" x 20' capacity, electric drive, no controls, needs to go through shop

718

Double End Timmer
8" x 16' capacity, electric drive with controls, includes 24" x 20' belt conveyor, needs maintenance

719

Moore Tilt Hoist
SN: 390-104, 3 arms, 6' x 11" capacity, 2 HD Tulsa winch, electric drive, working condition

720

Tilt Hoist
3 arm, 8' x 9' capacity, HD Tulsa winch, electric drive, in good condition

721

Tilt Hoist
4 arm, 4' x 12' capacity, Falk gear drive, electric drive, in good condition

722

Tilt Hoist
3 arm, 6' x 12', HD Tulsa winch, electric drive, in good condition

723

Tilt Hoist
3 arm, 8' x 12' capacity HD Tulsa winch, electric drive, fully dismanted, in good condition

724

Merchandiser Saw
60" blade capacity. Solid piece!

725

Jacobson Blower
Model: 3011-T, SN: 24383, 10" x 20", 25 hp 3 ph

726

Husk*
56" bottom blade, 40" top blade, off bearing belt, type: K3VL40/B hydraulic pump, line shaft ready, in good condition

727

McDonough Band Wheels*
6' D x 10" W, 1" band, in good condition

728

Husk*
7' D x 13" W, top wheel: 1 1/4" band, bottom wheel: 1 1/2" band, includes shaft and mounting brackets, pulley, in good condition.

729

Heardrig Bands*
(6) 436", (6) 392"

730

Dodge Reduction Gear*
SN: BT184002168, ratio: 141: 28:1, input speed: 1750 rpm, output torque: 123, 914 in-lb max, input power 24 hp max, output shaft 4" x 8.27", A1 mounting. New in crate!

731

Upcut Chopsaw
Pneumatic foot petal, no blade, electric drive, in good condition

732

Cyclone
48" x 60", 9" inlet, in good condition

733

Steel Band Chopper
1 hp 1 ph, get rid of your steel banding quickly, in good condition

734

Steel Band Chopper
1 hp 1 ph, get rid of your steel banding quickly, good condition

734A

Hershberger Slab Saw
Mechanical, 36" insert tooth blade, 18' infeed, line shaft ready, new in Feb. 2022, in good condition

735

Brewco Resaw
Model: BBBH, SN: BB2H722, 4H band, 8" x 16" capacity, 3/4" band wheels, hydraulic drive on feed and return belt, bands are line shaft, in good condition

736

Fast Line Resaw
Model: FLR1204, SN: 12102-93, 121202-96, 2 head, horizontal band, 20" x 14' belt conveyor, no band wheels, 1 head has wheel spindles, parts machine

737

MW Resaw
Single head horizontal 7" x 12' belt conveyor, 20' band wheels, no drive. Working condition

738

Wadkin Bandsaw Resaw
Model: PBR H/D, SN: 986, vertical bandsaw, 28" band wheel, tilt bed, 12" capacity, 220 VAC, 3 ph, 50 A, 21 kw, 60 H2, power feed, table is broke off, otherwise in good condition

739

Baghouse
40' x 40' x 9', in good condition

740

1993 Hydraulic Tank
250 gallon, includes vane type pump, 2 hp 3 ph electric motor. Air tank converted to hydraulic tank, in good condition

741

1975 Ingersoll Rand Compressor
Model: 25305, SN: 53087, type 30, 2 stage, 80 gallon, 5 hp 3 ph, horizontal, in good condition

742

1999 Air Tank
150 gallon vertical, was used in last 6 months, in good condition

743

1987 Air Tank
200 gallon vertical

744

1954 Ingersoll Rand Compressor
Model: 15T, SN: 30T 306612, type 30, 2 stage pump, horizontal, 15 hp 3 ph, has cooling fins, in good condition

745

1986 AJAX Compressor
Vertical 60 gallon, twin cylinder pump, 5 hp 1 ph electric, needs new air intake filter hosing otherwise in good condition

746

1976 Air Tank
135 gallon vertical, in good condition

747

1999 Ingersoll Rand Compressor
Model: 3000, SN: 00010314, 120 gallon horizontal, 2 stage compressor, cool radiator, 30 hp 3 ph electric, in good condition

748

Blower Fan
18" x 58", 18" x 19" outlet, no inlet plate, motor mount, no drive, in good condition

749

2009 Koger Air Blower Fan
Model: CCW-360, SN: KAF-7009, size: 21, 17" x 54", 16" RD inlet, 17 1/2" x 20" SQ outlet, no drive, in good condition

750

GP Fan Dust Blower
SN: J-3253, size: 276, 29 1/2" RD inlet, 20 1/2" x 30' outlet, 2 hp 3 ph electric, in good condition

751

Air Lock
14" x 27", HD, stainless steel paddles and inner housing, 7.5 hp 3 ph with reduction gear, in good condition

752

Air Lock
10" x 18" HD, stainless steel paddles and inner housing, motor mount, no drive, in good condition

753

Air Lock
12" RD inlet and outlet, 3 hp 3 ph with reduction gear, in good condition

754

Twin City Fan
SN: 81-32667-2-1, size: 28, type: JBA, 16" RD inlet, 16" RD outlet, 125 hp 3 ph electric, in good condition

755

New Klima Blower Fan
14' x 36" D, N motor 1800 rpm, 240 volt, 3 ph

755A

New Klima Blower Fan
14' x 36" D, N motor 1800 rpm, 240 volt, 3 ph

755B

New Klima Blower Fan
14' x 36" D, N motor 1800 rpm, 240 volt, 3 ph

755C

New Klima Blower Fan
14' x 36" D, N motor 1800 rpm, 240 volt, 3 ph

755E

New Klima Blower Fan
14' x 36" D, N motor 1800 rpm, 240 volt, 3 ph

755F

New Klima Blower Fan
14' x 36" D, N motor 1800 rpm, 240 volt, 3 ph

756

Air Lock
12" RD inlet and outlet, 2 hp 3 ph with reduction gear, some wear

757

Air Lock
12" RD inlet and outlet, motor mount, no drive, includes 24" to 12" reducer, in good condition

758

Dust Blower
6" x 20", 7" RD inlet and outlet, electric drive, hp unknown, in good condition

759

Buffalo Blower
SN: 84307562, 60-3 CB, HD pressure blower, 12" RD inlet and 7" x 10" outlet, 40 hp 3 ph, in good condition

760

Dust Blower
4" x 16", 5" inlet, 2 hp 1 ph electric, in good condition

760A

Dust Blower
22", 15" outlet, 14" inlet, new shaft and bearings, belt drive, good condition

760B

Dust Pipe
(5) 10" x 15', 75' total, HD, in good condition

761

Air Tank
500 gallon horizontal, in good condition

762

Air Tank
80 gallon vertical, in good condition

763

1945 Air Compressor
135 gallon horizontal, 1 stage pump, 5 hp 3 ph electric, in good condition

764

Donaldson Dust Bin
36" x 40" x 96", 5 hp 3 ph blower, 8 in.sq. outlet, some wear

765

Fulghum Chip Blower
16" x 44", 40 hp 3 ph electric, good condition

766

Twistair Compressor
Model: TA-030BB141TH, SN: M39908, max pressure: 125, 460 volt, 150 gallon horizontal, 30 hp 3 ph, includes starter

767

Phelps Chip Blower
Model: MH Chip, SN: 94417, 1800 rpm, 15" x 40", in good condition

768

Phelps Chip Blower
15" x 25", motor mount, in good condition

769

Phelps Chip Blower
15" x 25", motor mount, in good condition

770

Morbark Chip Blower
16" x 42", 18" x 14' discharge pipe, mounting plate, no drive, in good condition

771

Chip Blower
15" x 26", no drive, in good condition

772

Morbark Chip Blower
10" x 28", 12" x 8' discharge pipe, mount plate, 10 hp 3 ph electric, in good condition

773

Chop Saw
34" blade capacity, 26" x 90' belt conveyor, line shaft ready, no blade, in good condition

774

PH Double End Trim Saw
30" blades, 8' cut capacity, 11' log trough, hydraulic reservoir 5 gallon, no drive, in good condition

775

Roll Case
(2) 5' x 10', electric drive, in good condition

776

Roll Case
6' x 9', 3 strand, pop-up transfer, hydraulic drive, no drive on rolls, in good condition

777

Morbark Tank
20" x 29" x 48", was set up with Morbark chip pac, (1) single valve control, (1) 2 valve control, like new condition

778

Corley Gang Edger
6" x 24" capacity, 5 fixed blades, 2 moveable, power infeed and outfeed, electric drive, 30" x 22', 6" x 22' tail belt, electric drive, 6' x 10' roll case with 2 strand pop up transfer (edger infeed) electric drive, 2 skids of extra blades and spacers, in good condition

779

Schurman Gang Saw
Model: 10.SBA48, SN: 3014, 11" x 48" capacity, 23 blades installed, power infeed and oufeed, no drive, line shaft ready, outfeed has minor fire damage

780

Roll Case
65" x 20" roll case, 6 strand pop up transfer, idler end, no drive on transfer, hydraulic drive on roll case, was used with Schurman Gang saw (lot 779)

781

Cook Gang Edger
6" x 42" capacity, 40" x 96' outfeed, line shaft ready, extra blades and spacers, no blade guides, 4 fixed and 1 moveable, in good condition

782

Euford Edger
6" x 36" capacity, electric drive, two independent sliding arbors, lasers, includes 10' infeed and 20' tailing belt, 9 extra blades, 18" diameter, in good condition

783

Cornell CLB Saw
Model: CLB-BX, SN: 00-2-8-86, 10" thick capacity, linear positioning infeed, electric drive, includes 5' x 10' 4 strand transfer, 4' x 10' 3 strand tilt transfer, 30" x 10' roll case (infeed) electric drive, all controls, in good condition

785

Gang Saw
6" x 40" capacity, 5 fixed blades, 36" x 44" infeed, line shaft ready, in good condition

786

Corley Gang Edger
SN: 66-HP-004, 6" x 20" capacity, 54" x 96" infeed, 54" x 34" outfeed, electric drive on infeed, no drive on gang, needs rebuilt

787

Brewer Gang Saw
6" x 32" capacity, (1) 75 hp 3 ph, 4 fixed blades, with sizer ready, 30 hp 3 ph, in good condition

788

Shurman Gang Edger
6" x 48" capacity, 4 fixed and 1 moveable blade, 4' x 7' outfeed, 4' x 8' infeed, line shaft ready, in good condition

789

Ukiah Edger
Model: 10BAS, SN: 8242, 10" x 27" capacity, 5 fixed, 2 moveable, 150 hp 3 ph, in good condition

790

Cornell Gang Edger
Model: 660ED, SN: 252-1-5-89, 8" x 27" capacity, 5 fixed, 2 moveable, 150 hp 3 ph, working condition

791

Brewco Gang Sizer
SN: HNEH0002, 4" x 12" capacity, linear positioning gang, linear positioning sizer, hydraulic drive on infeed, electric drive on gang, in good condition

792

Debarker
Rosser head, flat track electric drive on head, includes barn sweep waste conveyor and controls, needs rebuilt

793

Fulghum Debarker
Model: 618, SN: F1-00-440, Rosser head, electric drive on head, 14' log capacity, controls, another Fulghum debarker for parts, needs rebuilt

795

Debarker
SN: F161332, Rosser head, electric drive on head, slant track, 16' capacity, cab and controls, needs rebuilt

796

Hosmer Debarker
Model: V-206-H, SN: V.206.135, Rosser head, electric drive on head, 16' capacity, complete unit, needs rebuilt

797

Morbark Debarker
Model: 636, SN: 285, post peeler type, electric drive, no controls, needs rebuilt

798

Debarker
Rosser head, electric drive on head, flat track, pentagraph, no cab or controls, needs rebuilt

799

HMC Debarker
Model: V-206, SN: 9422, Rosser head, electric drive on head, flat track, cab and controls, complete unit, needs rebuilt

800

Precision Debarker
Electric drive on head, flat track, waste conveyor, cab and control, complete unit, needs rebuilt

801

Mellot Debarker*
Model: 200, SN: 872001378, type: 8, Rosserhead, electric drive on head, needs rebuilt

803

HMC Debarker
Model: V206, SN: 196297, no head, slant track, frame and bulls wheels only

804

Hosmer Debarker
Model: V-206-HL, SN: V.206.269, Rosser head, electric drive on head, electric drive on bull wheels, electric over hydraulic on power feed, controls, includes barn sweep waste conveyor, needs rebuilt

805

1995 Mellot Debarker
Model: 200, SN: 94200311, Type: 10 Rosser head, all hydraulic, pantograph, no cab or controls, needs rebuilt

806

2005 West Plains Roll Case
Model: WPRS-RC, SN: 1433, 15" x 14' roll case, 4 1/2" rolls, electric drive, was used with a resaw system, almost new condition

807

Roll Case
53" x 16', 8 1/2" rolls, 4 pop up transfer, in good condition

808

Belt Conveyor
16" x 15', electric drive with reduction gear, in good condition

809

Belt Conveyor
14" x 10', waste belt, incline, electric drive, in good condition

810

Waste Conveyor
10" paddles, 48' long, WS78 chain, with incline, electric drive, in good condition

811

Waste Conveyor
11" ladder back chain

812

Log Trough
6" ladder back chain, 40' long, 5' tall, no drive, in good condition

814

Waste Conveyor
13 1/2" paddles, 38' long, includes 11' legs, electric drive with right angle gear reducer, 31-8

815

Belt Conveyor
38" x 17', no drive, needs new belt, in good condition

816

Meadows Belt Conveyor
32" x 60" belt conveyor, 32" x 96" panning, used as outfeed on edger, no drive, has some wear but in good condition

817

HMC Drop Belt
Model: BC96, SN: 3185663, 30" x 13', no drive

818

Concave Belt Conveyor
33" x 36', electric drive

819

Belt Conveyor
14" x 10', electric drive, in good condition

820

Belt Conveyor
8" x 17', no drive, in good condition

821

JB Hammermill
Size: 20, Stock: 1708, Pto belt drive, includes 7 screens, cyclone, bagger chute, bags, and belting. Always stored inside, good condition

822

Blower Fan
12" x 36", 14" inlet, 12" outlet, line shaft ready, in good condition

824

Mellot Log Turner
36", chain type hydraulic drive, in good condition

825

Renco Log Turner
36", chain type hydraulic drive, in good condition

826

Mellot Log Turner
36", chain type hydraulic drive, in good condition

827

Belt Conveyor
6" x 28', electric drive, in good condition

828

Belt Conveyor
8" x 14' belt with 6" x 11' roll case with tilt, set up as on out feed for edger, in good condition

829

Belt Conveyor
4" x 12' edger outfeed, hydraulic drive, in good condition

829A

Vibrating Conveyor
18" pan, 6" sides, 65' long, bar screen, electric drive, in good condition

830

Webster Vibrating Conveyor
Model: FSM, SN: 842-1863-5, size: 18-24, 40' long with chipper infeed, hydraulic drive, in rough condition

829B

Belt Conveyor
13" x 29' 3" sides with trash hopper, no drive, in good condition

831

Belt Conveyor
14' x 27', electric drive, needs new belt, in good condition

832

Dead Rolls
(1) 44" x 64", (1) 44" x 120", (1) 46" x 76", in good condition

834

Edger Infeed
8" x 24" rolls, 10' long, linear positioning infeed, hydraulic drive, heavy duty, in good condition

835

Roll Case
8 1/2" x 42" rolls, 14' long, frame is 22' x 8', includes 4 strand board kicker, hydraulic drive, in good condition

836

Roll Case
4 1/2" x 18", 16' long rolls, are on an angle, hydraulic drive, in good condition

837

Tilt Dead Rolls
2" x 18 1/2" rolls, 20' long, in good condition

838

Dead Rolls
(1) 2" x 26" rolls, 6' long, (1) 2 1/2" x 6", 11' long, in good condition

839

Roll Case
7" x 48" rolls, 13' long with reduction gear, no drive, HD, in good condition

840

Resaw Return
6 1/2" x 20" rolls, 2 strand pop-up transfer, hydraulic drive, no drive on rollers, in good condition

841

Roll Case
20" x 5', electric drive, in good condition

842

Roll Case
4" x 10", 8' long, no drive, in good condition

843

Roll Case
4 1/2" x 12" rolls, 20' long, hydraulic drive, includes 3 arm board kicker, pneumatic, in good condition

844

Unscrambler
5 strand, 8' x 11'6", WS78 chain, no drive, in good condition

845

Unscrambler
5 strand, 8' x 13', 7'6" tall, 81X chain, electric drive, in good condition

846

Roll Case
6 1/2" x 36" rolls, 16' long, rolls are on slant, includes drive for 6 strand transfer, no idler, electric drive, in good condition

847

Unscrambler
7 strand, 10' x 16', 9'3" tall with 6" x 24" rolls, rolls at a slant, electric drive, in good condition

848

Dead Rolls
6 1/2" x 64 x 21' long, in good condition

851

Catwalk
33" x 37', in good condition

852

Aluminum Grating
(10) 1 3/4" x 21" x 34 3/4", 1 3/4 x 19 x 41, 1 3/4" x 25" x 35 3/4, 1 3/4 x 14 1/2 x 21", in good condition

853

CTR Delimber
42" buck saw, in good condition

854

Spiral Staircase
80" D x 11' T, in good condition

855

3 Strand Log Deck
10' x 17' log deck with Tulsa winch drive, stop'n'load

856

Log Trough
30' long, electric drive, heavy duty, 5" wide chain for narrow logs, in very good condition

857

New Stock Equipment 6 Gear Box
1887 rpm, 86. 43:1 ratio

858

Transfer Deck
10' x 19'6", 3 strand, electric drive

859

4 Strand Green Chain
23' long, C-188 chain, electric drive, no drive shaft

860

Transfer Deck 6 Stand
14' x 26' long, in good condition

861

2 Strand Transfer Deck
3' wide x 24' long, electric drive, in good condition

862

4 Strand Log Deck
9'6" wide x 24' long, rooftop chain, in good condition

863

2 Strand Transfer Deck
SN: 9998, 4'6" wide x 21', electric drive with tulsa winch, in good condition

864

6 Strand Transfer
12 1/2' wide x 7' long, electric drive, 81X chain, air operated, cant stops, in good condition

865

4 Strand Transfer Deck
H78 chain, 11'6" wide x 40' long, gear box drive, in good conition

866

5 Strand Log Deck
13'6" wide x 50' long, electric drive, heavy duty, in good condition

867

4 Strand Transfer Deck
13' wide x 8' long, electric drive, in good condition

868

5 Strand Log Deck
SN: 9848, 17' wide x 38' long, stop'n'load, electric gear box drive, in good condition

869

4 Strand Transfer Deck
11' wide x 27' long, hydraulic drive, H-130 chain, cant stops, in good condition

870

6 Strand Transfer Deck
Model: Hosmer, 14' x 10' long, electric drive, manual stops, in good condition

871

4 Strand Transfer Deck
12' wide x 23', with drive

872

6 Strand Transfer Deck
13'5" wide x 10' long, electric drive

873

4 Strand Log Deck
Chain included, no drive, has drive shaft, 13' wide x 20' long

874

3 Strand Green Chain
10'8" wide x 30', gear box drive, C-188 chain, in good condition

875

4 Strand Transfer Deck
SN: 9040, 10'6" wide x 38' long, electric drive, H78 chain, in good condition

876

4 Strand Grading Deck
SN: 9981, 13' wide x 20' long, C55 chain, electric drive, in good condition

877

4 Strand Transfer Deck
SN: 9753, 40' long, electric S-drive, 81X chain, good chain

878

5 Strand Green Chain
14' wide x 82' long, electric drive, side-roller tape, chain on outside strands, in good condition

879

4 Strand Transfer Deck
SN: 9973, 9'6" wide x 24' long, rooftop chain, electric tulsa winch drive, in good condition

880

3 Strand Transfer Deck
8' wide x 70' long, electric drive

881

2 Strand Transfer Deck
5'6" wide x 10' 10" long, has cant stop, hydraulic stop

882

Green Chain
10' x 17' 4 strand, (1) 8LX chain, 3 rooftop chain, in good condition

883

2 Strand Transfer Deck
29" x 25', 13' has its own drive, 12' has its own drive, hydraulic drive, was used to transfer from chopsaw to gangsaw, in good condition

884

Fuel Tank
3' x 5', no leaks, 300 gallon, in good condition

885

Saw Dust Bin*
10' x 10' x 16', 24" rack/pinion slide gate, includes stirrator, electric drive, in good condition

886

Doyle Log Scale*
48" log scaler, in good condition

887

Doyle Log Scale*
48" log scaler, in good condition

888

Doyle Log Scale*
36" log scaler, in good condition

889

Log Decimal Scale*
36" log scaler, in good condition

889A

Doyle Scribner*
36" log scaler, in good condition

890

Lumber Grader*
36", 3 line, in good condition

891

Lumber Grader*
36", 3 line, in good condition

892

Lumber Grader*
24", 4 line, in good condition

893

Hydraulic Tank*
40 gallon, was used on feed truck, in good condition

894

PTO Shaft*
8 series, 8" x 46" 1 3/8" 21 Spl QD BE, all purpose driveline, includes 2 jack shafts, 2 3/16" shafts, B6 15" pulley, B6 9" pulley, in good condition

895

Lincoln Electric Motor*
50 hp, 1765 rpm, frame: 326T, includes C4 9" pulley, in good condition

896

Lincoln Electric Motor*
75 hp, frame: 405T, with B4 12" pulley, includes motor mount, in good condition

897

Reduction Gear*
1 7/8" output shaft at 14 rpm, includes c-phase mount 2 hp electric motor 3 ph, in good condition

898

Electric Motor*
5.5 hp, 1750 rpm, frame: 213T, B2 3 1/2" pulley, in good condition

899

Lincoln Electric Motor*
15 hp, 1750 rpm, frame: 254T, B2 10" pulley, in good condition

900

Pallet of Disconnects*
3 ph disconnects, (2) 30 amp, (1) 60 amp, (1) 100 amp

903

Hydraulic Reservoir*
21" x 59" x 29", in good condition

904

Hydraulic Pump*
(1) vane type, (1) pressure compressor with 60 hp 3 ph electric motor on frame, in good condition

905

Clarage Dust Blower*
Number 25, 20" x 58", 24" Rnd inlet, 21" x 22" outlet, belt drive, some wear

905A

Air Intake Valve*
20 1/2" x 22 inlet, 24" rd outlet, 50" tall, in good condition

905B

Cyclone*
8' x 31', 24" inlet, 26" x 44" air return, 16" outlet, access door, in good condition

905C

Blower Pipe*
24", (1) 90 elbow, (2) 45 degree elbows, (1) 10', (1) 51", (1) 34", in good condition

906

Heat Exchanger*
Model: AOVHM-40, SN: C132526, 10" x 41 1/2" x 38", 300 psi, hydraulic drive on fan, includes stand, in good condition

907

Belt Conveyor*
36" x 42', 36" tall, electric drive, in good condition

908

Cyclone*
42" x 9', 10" inlet, 16" outlet, stand included, in good condition

909

Rotex Shaker Screen*
5' x 14', 17' overall, hp unknown electric drive, used to separate chips from sawdust, in good condition

910

Cyclone*
6' x 12'8", 10" inlet, 18" outlet, in good condition

911

Sawdust Blower*
9" x 28", 8" inlet, 8" outlet, motor mount, no drive, some wear

912

Allis Chalmers Silage Blower
Electric drive, includes 48' of 8" pipe, in good condition

913

Conveyor*
5' x 18', 4' tall capacity, 9'7" overall height, no drive, some wear but in good condition

914

Clipper Belt Lacer
SN: 123644, No. 3"-6"

915

Clipper Belt Lacer
SN: 76205, No. 3"-6"

916

Hanchett Swage and Armstrong Setter
Swage, No. 55 setter, 6900 B, in good condition

917

Hanchett Swage and Setter
SN: 5058, setter No. 8 band shaper, in good condition

918

Manual Saw Filer
In good condition

919

Jockey Grinder
Electric drive, in good condition

920

Jockey Grinder
Electric drive, in good condition

921

Makita Grinder
Electric drive, in good condition

922

Steel Strapping Tools
In good condition

923

Steel Strapping Tools
In good condition

924

Steel Strapping Tools
In good condition

925

Steel Strapping Tools
In good condition

926

Steel Strapping Tools
In good condition

927

Steel Strapping Tools
No tensioner, in good condition

928

Pallet Nailer
(2) Bostich pneumatic nailers, in good condition

929

Pallet Nailer
(1) max good condition, (1) Bostitch, bad seal

930

Simonds Teeth Shanks
(50) F-8, (50) B-8, in good condition

931

New Simonds Saw Bits
(300) 9/32, carbide dipped

932

New Treated Yellow Pine Posts
(100) 3 1/2" x 7'

933

New Treated Yellow Pine Posts
(100) 3 1/2" x 7'

934

New Treated Yellow Pine Posts
(100) 3 1/2" x 7'

935

New Treated Yellow Pine Posts
(100) 3 1/2" x 7'

936

New Treated Yellow Pine Posts
(100) 3 1/2" x 7'

937

New Treated Yellow Pine Posts
(100) 3 1/2" x 7'

938

New Treated Yellow Pine Posts
(100) 3 1/2" x 7'

939

New Treated Yellow Pine Posts
(100) 3 1/2" x 7'

940

New Treated Yellow Pine Posts
(100) 3 1/2" x 7'

941

New Treated Yellow Pine Posts
7 1/2" x 8'

942

New Treated Yellow Pine Posts
7 1/2" x 8'

943

New Treated Yellow Pine Posts
7 1/2" x 8'

944

New Treated Yellow Pine Posts
7 1/2" x 8'

945

New Treated Yellow Pine Posts
7 1/2" x 8'

946

New Treated Yellow Pine Posts
7 1/2" x 8'

947

New Treated Yellow Pine Posts
7 1/2" x 8'

948

New Treated Yellow Pine Posts
7 1/2" x 8'

949

New Treated Yellow Pine Posts
7 1/2" x 8'

949A

New Farm Gate
50” x 16’ , 1 ¾” round tube 14GA, includes hangers

949B

New Farm Gate
50” x 16’ , 1 ¾” round tube 14GA, includes hangers

950

Cant Stacker/Sorter
7' x 20'6", 10'4" tall, no drive, like new condition

951

Aluminum Waste Conveyor
5" x 16', single chain, rubber paddles, no drive, in good condition

952

Roll Case
11" x 36" rolls, 5 rolls, 14'3" long, hp, no drive, in good condition

953

Webster Vibrating Conveyor
17" pan, 6" sides, 21' long, burr screen, chipper infeed, no drive, in good condition

954

Jay Bee Hammer Mill
13 1/2 x 19 1/2 intake

955

Roberts Mill Hammermill
SN: 761, 3600 rpm, top feed style, 60 hp 3 ph electric, just came out of production, in good condition

956

Aerovent Blower
SN: 8705494-001, 17" x 48", top discharge, 20 hp electric drive, 20" intake, 17" x 18" outlet, in good condition

957

Lumber Cart*
30" x 60" x 45", rubber wheels, in good condition

958

Lumber Cart*
27" x 46" x 48", swivel wheels on one end, in good condition

959

Lumber Cart*
42" x 84" x 48", stop on one end, in good condition

960

Lumber Cart*
42" x 84" x 48", stop on one end, in good condition

961

Lumber Cart*
42" x 96" x 48", stop on one end, in good condition

962

Lumber Cart*
42" x 96" x 48", stop on one end, in good condition

962A

Lumber Cart*
3ft x 6ft, railroad cart style

962B

Lumber Cart*
3ft x 6ft, railroad cart style

963

MMT Notcher*
Model: 150A, SN: 247, single head, 15 hp 3 ph, electric drive, in good condition

964

Belt Conveyor*
10" x 35', electric drive, in good condition

965

Belt Conveyor*
16" x 24' cleated belt, hydraulic drive, dust cover. Has some wear but in good condition

966

Baker Resaw Parts*
Belt, arbor, in good condition

967

Jones Saw Grinder*
Electric drive, includes holder for electric grinder, band saw tooth setter, in good condition

968

Banding Cart*
Deluxe, on wheels, in good condition

969

Dust Blower*
11" x 40", 12" inlet, 10" outlet, 15 hp 3 ph electric, in good condition

970

Cooks Band Roller*
In very good condition

971

Cooks Cat Claw Sharpener*
Electric drive, in very good condition

972

Manual Strapping Tool*
MIP 499, in good condition

973

Manual Strapping Tool*
MIP 499, in good condition

974

Manual Strapping Tool*
Mul-20, used for steel strapping, in good condition

975

Manual Strapping Tool*
Mul-20, used for steel strapping, in good condition

976

Manual Strapping Tool*
Mul-20, used for steel strapping, in good condition

977

Manual Strapping Tool*
Mul-20, used for steel strapping, in good condition

978

Bosch Strapping Tool*
Battery powered, includes 2 batterys and charger, plastic only, in good condition

979

Bosch Strapping Tool*
Battery powered, includes 2 batters and charger, plastic only, in good condition

980

Steel Banding Clamps*
1/2" clamps, 3/4 box full, includes 1 manual clamp clincher, in good condition

981

Plastic Strapping*
1/2" x 3/4 full roll, in good condition

982

Cant Edger*
4" x 20" capacity, 4 fixed blades, electric drive, hydraulic drive on infeed and outfeed, self contained hydraulic pak, shop built, box of extra blades, in very good condition

983

Belt Conveyor*
26" x 42', no drive, in good condition

984

Post Pointer*
2" D capacity, electric drive, includes hydraulic pak and disconnect, in good condition

985

Banding Cart*
Includes some steel banding, in good condition

986

Banding Cart*
Almost new and in good condition

987

Steel Banding*
5/8" x full roll, almost new condition

988

Fulghum Chip Screen*
5x5, electric drive, includes cyclone, last in production 2021, in good condition

989

Morbark Chipper*
Model: 348, SN: W359, 3 knife, RH, top discharge, no drive, last in production 2021, in good condition

990

Sawdust Dryer*
Furnace 8' x 14', 8'6" tall, weight: 26000 lbs., 3 infeed augers, electric drive, fully line with heat bricks, blower, 38" x 16' pipe lined with heat bricks, 8' x 24' sawdust tumbler, 40" inlet, 24" outlet, electric drive, weight: 22000 lbs., total length: 30', 38" x 8' pipe lined with crete, 10000 lbs, (as is)

991

Belt*
30" x 142', 1/8" thick, in good condition

992

Roll Case Transfer*
4" x 26" rolls, 11' long, 5 strand pop up transfer, #40 chain, all mechanical, line shaft ready, includes 24" x 10' belt conveyor with hold down, no drive, in new condition

993

Steel Platform*
5'6" x 11'2", includes steps, 42' railing, in good condition

994

Froedge Deduster*
4" x 7" capacity, line shaft ready, in good condition

995

Shipping Container*
8' x 8' x 20, used and in good condition

996

Shipping Container*
8' x 8' x 20, used, new paint inside, in good condition

Photo Gallery

Share This Listing

Other Sales by
This Company

Nov 8
Mio, MI

Nov 13
Various, IN

Jan 1
Des Arc, AR

Oct 1
Middlebury, IN

Showcase Equipment Auction & Expo

Bright Star Realty and Auctions, INC

Contact: Loren Beachy
Phone: 574-825-0704

206 E Vine St.
Wolcottville, IN 46795

Friday Sep 15, 2023 Completed

Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded where required.
Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer:

Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.
Governing Law.
1. For Auctions in the State of Indiana and Online. Unless otherwise indicated, all Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are deemed to be entered into in the State of Indiana, all bids and payments are deemed to be received in the State of Indiana, and the contract, if any, will be deemed to be formed and entered into in the State of Indiana.
Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.
Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
Nature of the Auction. This Property is being sold at the Auction in the manner indicated on the first page of this Agreement.
Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
2. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
3. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
4. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
5. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
6. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
7. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
8. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.
9. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties, (i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
10. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
11. No Reduction or Retraction of Online Bids. Online bids may not be reduced or retracted.
12. Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.

1. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.
Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). All prebids and maxbids placed online are considered absentee bids. Auctioneer pledges complete integrity in the treatment of absentee bids and absentee bids may be initiated and advanced in accordance with Auctioneer’s policies and procedures. Auctioneer has the right to initiate any absentee bids at 25% to 50% of their maximum amount. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot of Personal Property will be the Buyer of such Property.
All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.

Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or representation by Auctioneer.
Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ringman, or multiple bid assistants or ringmen, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked-Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases are due upon receipt of your invoice. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. If onsite bidders wish to send a wire, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.
Wire Transfer Payments. Buyer shall obtain verbal verification of all bank account information from Bright Star Auctions prior to initiating transfer. Except as otherwise provided by law, we shall not be liable for any loss or damage due to misplaced, unauthorized or fraudulent fund transfers.
ACH/eCheck Payments. By providing account information to Bright Star Auctions, buyer gives permission for Bright Star Auctions to retain payment information on file and represents they are the authorized account holder. Upon authorization to collect payment from Buyers account and prior to transfer, Buyer is responsible to notify their financial institution of the impending transaction. Buyer agrees to notify Bright Star Auctions of any changes in account information.
Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.

No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Tools, packing material, and/or assistance will not be supplied at Pickup, so Buyer must plan accordingly. Disassembly and removal shall be done in a quiet and workmanlike manner, and each Buyer, in making its bid, shall thereby indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer’s employees, agents, representatives, or independent contractors in connection with the Pickup. Any and all damages to the Pickup site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller. Each Buyer must show a copy of the invoice (digital or hard copy) and government-issued photo identification before Lots will be released. No Buyer shall bring pets or young children to the Pickup, as the movement of Lots presents an extremely high-risk environment that could result in injury or death.
Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them. In addition, Buyer’s bidding privileges may be suspended at future auctions.
Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.
Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled to specific performance or other equitable relief.
Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim or suit relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their rights.

Listing Details
Bright Star is excited to provide a consignment auction to serve your area. Our goal is to provide sellers with an easy option to turn their unused equipment into cash. We provide cutting edge marketing to earn sellers top dollar for their equipment. Buyers can be expected to be treated fairly and with absolute transparency and integrity. All items sell absolute* No Minimums * No Reserves * We look forward to working with you. 00 Information Lot Auction Agent: Mervin Lehman 260-599-8369 Accepting consignments of quality equipment! Specializing in all heavy equipment, including construction, excavating, sawmill, forestry, trucks and trailers. All items sell absolute* No Minimums * No Reserves Call your auction agent today to capitalize on free marketing for your equipment. - - Showcase Equipment is having an inventory reduction auction and will be selling approx. 30% of their inventory. This will be a superb opportunity to purchase quality sawmill equipment that requires no rigging. We are also accepting consignments to add to this auction. The auction will be on the 15th with the expo starting on the 14th which features live lumber sawing demos with steam engines, vendor booths, and a spark show at dusk. We will be selling 2 hours’ worth of new cordless tools on Thursday evening. Food will be available. Plan to attend! 01 Preview Information* Monday to Friday from 7AM to 3PM. Contact Mervin to set up an appointment 260-599-8369 Location of auction: 206 E Vine St., Wolcottville, IN 46795 02 Loadout Information Free loadout on Saturday Sept 16 from 8 AM to 1 PM and for 2 weeks following the auction. Starting Oct 2nd, by appointment and for a $25 per lot loadout fee. Any items not picked up in 30 days become the property of Showcase Equipment. Contact Mervin 260-599-8369 03 Payment Information Payment terms: 7% sales tax, 10% Onsite Buyers Premium, 13% Buyers Online Premium. Cash, check, wire transfer. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice. Onsite buyers, payment is due the day of the auction. If onsite bidders wish to send a wire and still be assessed only the onsite buyer’s premium, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. 90 CAT 390F L Hydraulic Excavator 1:50 Scale Replica - Die Cast Metal Have fun buying a high-quality, die-cast toy! All proceeds including buyer's premium will go to Feed My Starving Children (FMSC) which is a Christian nonprofit dedicated to seeing every child and person around the world healthy, nourished and whole in body and spirit. Bright Star will pay for standard shipping and handling to the 48 contiguous states for buyers of this lot. https://www.youtube.com/watch?v=jYATxeDmuzM&t=8s 98 Heavy Equipment Key Set 36 Keys Shipping available for $20 99 Manual Sealless Steel Strapping Tool Model A333, works for 1/2" 5/8" or 3/4" banding, new in box. Shipping available for $30 510 Logging Cart Draft horse logging cart, steel wheels, air tires are available if so desired, new condition 511 John Deere Skidder SN: DW540EC548898, meter reads: 27020, cable skidder, 1/2" cable, 7' blade, 23.1-26 tires, good strong machine, in good condition 512 John Deere Skidder Model: JD740, grapple and cable, 3/4" cable, 112" blade, 30.5L-32 tires, rotary grapple, enclosed cab and heat, 2 way blade, in very good condition 520 Equipment Trailer 102" x 18', 5' beaver tail, double ramps, tandem dually, 10,000 lb axle, air brakes, 14" I beam frame, pintle hitch, single jack, needs new wood, 8.25/R15 tires, in good condition. No title, bill of sale only. 521 2015 PJ Gooseneck Trailer VIN: 4P5LD2524F3012947, 102" x 18'8", 5' beaver tail, double ramps, tandem dually, ST235/85R16 tires, spare, toolbox, hydraulic brakes, 10000 lb axles (dexter), stake buckets, double jack, road ready, in good condition. Has title. 522 Ditch Witch 3700DD Trencher SN: 3T0365, Meter reads: 1994 hours, 64" 6 way blade, 6" x 36" trench cut, pto ROPS, 2 new tires, has leak in transmission, operates as it should. In good condition 523 Trailer 6' x 11' tilt bed, single axle, brakes are inoperable. In good condition. No title, bill of sale only 527 Loader Forks JRB 4' long. In good condition 536 Loader Forks 12' x 43", in good condition 528 New Skid Steer Bucket 72", chain ready, by Trailside Metal Works 529 New Skid Steer Bucket 78", chain ready, by Trailside Metal Works 529B New 83" Steinsammler 529C New 83" Steinsammler 530 Loader Forks 12' x 43", in good condition 531 La-Mar Log Grapple SN: 0026, skid loader attachment, 1/2" cable, variable control on cable, quick release winch, like new condition 532 Crawler Loader Bucket 1 3/4 cu.yd. top pivot style, needs new hydraulic hoses, in good condition 533 New Holland Hoe Bucket 34" wide, in good condition 534 Logging Forks Floating forks skid loader attachment, 2” x 6” x 48" long, 12000 lb. capacity, includes welded on chain hooks, welded 2" ball hitch, back blade to keep your trail graded 535 New Skid Loader Attachment Grader 72" wide x 64" long x 18" tall, 2 adjustable blades, dual attachment plates 535A New Pull Type Grader Lawn mower or mini pony, 42" wide x 48" long x 8" tall, dual hookup 535B New Grader 7' grader, has hookup on both ends, lightly used condition 536 Prentice 325 Knuckleboom SN: 1S9HD4520PS239207. Meter reads: 17,201. Engine: Cummins. Fuel type: Diesel. Continuous Grapple: Yes. Trailer: Yes, new wiring, lights, and road ready. Delimber: No. Bucksaw Hookups: Yes. Features and Notes: 11R22.5 tires, new battery, has leaks in several cylinders, runs and operates as it should 540 2023 New/One-trip 20' Standard Container RXCU1023851, 20' long, double doors on one end 541 2023 New/One-trip 20' Standard Container HPCU2271820, 20' long, double doors on one end 551 New Aluminum Fuel Tank 150 gallon tank, includes stand and hose. 552 HMC Rosser Head Debarker Model: V206, SN: 1789-20, 20' log capacity, slant track, fully hydraulic, new glass in cab, pantograph, no controls in cab, reconditioned by seller, in good condition. Contact Myron Nissley with any questions 574-536-2481 553 Morbark Chip Pak Model: 3-48, SN: 529, 48", RH, 3 knife, no drive on chipper or shaker, reconditioned by seller, in good condition. Contact Myron Nissley with any questions 574-536-2481 554 New Accu-Cut Edger 4" x 36" capacity, HP electric motor, plug and play 554A 2023 Timber Buddy XP380 Band Mill John Deere 4045 PowerTech 120 HP diesel engine, fully hydraulic, 2" x 30" band wheels, 42" throat opening, 38" diameter x 24' log capacity, stationary stands. Includes log lift, mudsaw, power end feed on tapers, outfeed belt, and laser. BRAND NEW! 554B New 2023 Pro-Cut Resaw* Single head resaw with return, electric drive 555 New Whirlwind Cyclone 48" D, 10" inlet 556 New Whirlwind Blower SW-12 10" inlet 557 Brand New Supreme MFG Live Roll Case 20" x 20', very heavy duty, electric drive 558 Brand New Supreme MFG Lumber Cart Very heavy duty, 42" x 92" 558A Brand New Supreme MFG Lumber Cart Very heavy duty, 42" x 92" 558B Brand New Supreme MFG Lumber Cart Very heavy duty, 42" x 92" 558C Brand New Supreme MFG Lumber Cart Very heavy duty, 42" x 92" 558D Brand New Supreme MFG Lumber Cart Very heavy duty, 42" x 92" 558E Brand New Supreme MFG Lumber Cart Very heavy duty, 42" x 92" 561 New Self Dumping Hopper 3/4 yard fork lift pockets 562 New Self Dumping Hopper 1 yard, fork lift pockets 563 New Self Dumping Hopper 1 1/2 yard fork lift pockets 564 New Self Dumping Hopper 2 yard, fork lift pockets 565 New Self Dumping Hopper 2 1/2 yard, fork lift pockets 566 New Self Dumping Hopper 3 yard, fork lift pockets 567 New Self Dumping Hopper Heavy Duty, 4 yard, fork lift pockets 568 New Self Dumping Hopper Heavy Duty, 5 yard, fork lift pockets 569 Dynamic Grinder Model: 5240HZ, SN 5240H21008110620, 425 HP, 1591 hours, year 2011, Volvo Penta engine, 37,640 total weight, this unit is totally portable, good running condition 571 Portable Bandmill 28" cut, 670 cc predator, 20' trave, 12 volt setworks, extra bands, in good condition 572 Cleereman Carriage 3 HB, 12' carriage, pneumatic 60' track, no setworks, in good condition 573 1996 Lane Carriage Model: 336, SN: 56700196224, 4 hb, 14' carriage, hydraulic dogs, 10 gallon reseviour, electric drive, 60' track, working condition 574 Renco Carriage 4 HB, 20' carriage, air dogs, hydraulic setworks, 5 gallon reservoir, electric drive, working condition 575 Meadows Track and Carriage 3 HB handset, 14' carriage, husk, 60' track, in good condition 576 Helle Mill 3 HB, 14' carriage, fully hydraulic, 60' track, hydraulic pak, top and bottom blade husk, cab and controls, a complete setup log turner, in good condition 577 Renco Mill* 4 hb, 2 have air dogs, 3' x 15' carriage, 45' track, husk with Tyrone Berry drive, 56" blade, cab controls, no cab, electric drive on carriage, no drive husk, in good condition 578 Mater Carriage* 4 hb, hydraulic and air operated, 60' track, carriage feed 579 Salem Carriage* SN: 14824991, 3 HB, 48" linear position headblocks, Tong dog, Air dogs, 15' long, 2 HB recently replaced, includes pantograph, in good condition. 580 Meadows Mill* 2 HB, electric setworks, includes 40' track, carriage drive, husk, cab and controls, in good condition 580A Corley Circle Mill* 3 HB handset, RH friction feed, complete portable mill, 36' track, husk with 50" blade, log turner, blower, hydraulic reservoir, line shaft ready, in good condition 581 Cat Power Unit SN: SEK79269 Meter reads: 2,523 hours Fuel type: Diesel Clutch: No, #1 Bell housing Features and Notes: Oil preserve 66 psi at 650 rpm, 77 psi at 1800 rpm. A low hour engine with lots of potential! Good runner! 582 1993 Cummins Power Unit Model: KTA19G2 SN: 61174 Meter reads: 1,443.3 hours Engine: 37146338 Fuel type: Diesel Clutch: No Features and Notes: As is condition, all parts are included. As of 7/18/2023, crank shaft is still missing 583 5.9 Cummins Power Unit 190 hp, 1220 hours, electronic governor, no clutch, #2 bell housing, 11" drive, in very good condition 584 International Harvester Diesel Power Unit Model: UD360 SN: 6660001U009575 About 210 hp, has twin disc clutch, all new filters. Good running condition 584A 855 Cummins 240 hp, clutch and radiator, 10GE pulley, runs good, but has a water leak 585 John Deere Power Unit Model: 4045HF285. SN: PE4045L037422. Meter reads: 8,430 hours. 140 hp at 2400 rpm, twin disc clutch, brand new oil pump, excellent running condition 586 Brewer Transfer 3 strand, 3' x 14', C55 chain, electric drive, in good condition 587 Helle Log Deck 7 x 22, 2 strand H78 chain, with tulsa winch and hydraulic drive, stop'n'load, legs on load side are detached, in good condition 588 Brewer Unscrambler 4 strand, 6' x 7' x 4', electric drive, in good condition 589 Transfer 3' x 16', 3 strand, includes gear reducer with c-phase mount, in good condition 590 Belt Conveyor 12" x 20', no belt, includes reduction gear with c-phase mount, in good condition 591 Belt Conveyor 12" x 15', smooth belt, no drive, in good condition 592 Transfer 7" x 11", 3 strand, C55 chain, includes 3 ph 3 hp motor with gear reducer, good solid piece 593 Rees Airlock Model: RV-16, SN: 90-620-119, 16", includes 3 ph 2 hp motor with reduction gear, in good condition 594 Steel Hopper 30" x 39" infeed, 37" tall, was used as infeed on hog, in good condition 595 Shaving Bin 5' x 5' x 9'6" tall, includes 18" x 18" slide gate, a 21" x 60" cyclone with 9" intake, in good condition 596 Montgomery Blo-Hog 5" x 10" infeed, includes 8" x 10' Webster vibrating with 6" sides, electric drive, in good condition 597 Helle Vertical Edger 2 moveable blades, 5" capacity, electric drive, in good condition 598 Helle Log Turner 3' long, chain type hydraulic drive, in good condition 599 Pallet Carriage drive, hydraulic pump, control valve, in good condition 600 Chicago Press Brake Model: 135, SN: L15915, 15 ton, 6" throat, 4' wide, mechanical, 1 hp single ph, no dies, in good condition 601 W.A. Whitney Punch Press Model: 812-630, SN: 812-630-20286, 150 ton, 12" throat, 1" capacity, includes hydraulic pump with 30 hp 3 ph electric, in good condition 601A South Bend Precision Lathe Model: A, SN: CL 770R, 7/8" through, 30" capacity, 3 jaw chuck, threading, tool post, tooling, variable speed, electric drive, in good condition 602 Chicago Press Brake Model: 135, SN: L-15413, 15 ton, 6" throat, 4' wide, mechanical, 3/4 hp 3 ph electric, no dies, in good condition 603 Universal Mill Horizontal/vertical mill, 12 x 60 table, 38in travel, includes arbor for horizontal mill, power feed, in very good condition 604 Manford Mill Model: 3KV, SN: 891117, 10" x 50" bed, manual feed, includes taper collect set and some tooling electric drive, digital readout, in good condition 605 The Porta Punch 2.75 throat opening, 13 1/4" x 7 1/2" x 3 3/4" dimensions, 31 lbs punching capacity, 13/16 round hole through 1/2" plate includes full set of dies, hydro pak, electric, in good condition 606 Heska Vertical Bandsaw Model: ESU 6, SN: 773204, 1 1/2" x 25" band wheel tilt bed, bed has 10" travel, electric drive, in good condition 607 Bronx England Press Brake Model: 4358, SN: 23568, type: 13, 10 ton 6" throat, 4' wide, no dies, 3 hp 3 ph electric mechanical, in good condition 608 TOS Mill Model: FA3AV, SN: 12540, 12" x 54" bed, digital readout, power feed, electric drive, in good condition 609 Diehl Machinery double end saw Model DE-92, SN: 73M-3240-2516, Bore and chucking machine, 7 travel, has its own hydraulics, electric drive, in good condition 610 Grob Inc. Vertical Bandsaw SN: 10120, Type: NS18, 1 1/2" x 18" band wheel, tilt bed, electric drive, in good condition 616 Electric Motor Weg 75, 3 ph 1780 rpm, 364/ST WT. 775 617 Reeves Reduction Gear 10/1 ratio, right angle warm reducer, in good condition 618 Electric Motor WEG, 5 hp 3 ph 1755 rpm, 182/4T, in good condition 619 Vibrating Conveyor 2' x 10' with chipper in feed, conveyor drive, no power, in good condition 620 Vibrating Conveyor 16" x 10', 1 section only, parts only 621 Morbark Chip Blower Model: 079, 16 1/2" x 16 1/2" outfeed, reconditioned by Showcase Equipment, no motor 628 Welding Table 3/8" x 34' x 57", in good condition 629 Engine Hoist 2T capacity, 1 is like new, in working condition 630 Couplamatic Crimper SN: 47878, includes various fittings, in working condition 631 Pallet of Pulleys (1) G180R with hub, (2) 2TB184, (1) 2A18.08K, (1) 2B 16", (2) 2AK104h, (1)2TB60 with hub, (2) 1B 6.8 SDS with hub, (2) 6.8 2 BSPS, (1) 4B52 SD with hub 632 Pallet of Pulleys (1) 20-5-C with F-hub, (2) 8C10.0, (1) B6 12.5, (1) B314, (1) B218, (1) 2C10, (1) 8B 9.5, (1) 3B7, (1) 4B x 9.4, (1) 3C x 8, (1) 5B 8.0, in good condition 633 Pallet of Pulleys (1) 6c 270 with hub, (1) 4B25OR with hub, (1) 5C 16 with hub, (1) 6C10, in good condition 634 #80 Roller Chain Approx. 1200', 2626 lbs., this chain is lightly used, like new condition 635 Pallet Jack (1) 27" x 48", 5500 lb. capacity, (1) 21" x 45", 2200 KG capacity, in good condition 636 Pallet Jack (2) 21" x 45", 2000 KG, in good condition 637 Lumber Racks (2) 3' x 5' x 4', (1) 3' x 80" x 44", in good condition 638 Cornell Mud Saw 6' at pivot, electric drive, no blade, in good condition 639 Moulder Infeed 6" x 6" capacity, electric drive, like new condition 640 Electro Hydraulic Power Unit SN: IN45224, GPM260, pump: 312, 50 hp, 3 ph., 480 volt, part of lid missing, 60 gallon reservoir, in good condition 641 Hydro System Power Pak Model: 10-V10.1P1P.1C20-1-200, SN: 3741 501127, 10 gallon capacity, 5 hp 3 ph., includes disconnect, 4 parker air valves, 4 vicker hydraulic valves, needs tune up 642 2010 Hydraulic Pump SN: 2520V21A141CC22L, includes 5CX14 pulley, 3 hydraulic valves 643 Lift Table 54" D, 3000 lbs. capacity, pneumatic, in good condition 644 Pallet Jack (1) 27" x 48', (1) 21" x 45", 2000 lbs. capacity 645 Pallet Jack (2) 21" x 45, 2000 capacity, in good condition 646 Lincoln Welder Model: AC-180-S, SN: 5879-704, Input: 1 ph, 230 volt, 60 cycle, 37 amps, Output: Max welding current 180 amps at 25 Arc volts, 115 degree Celsius rise, mas O.C.V-75 volts, duty cycle 207. In good condition. 647 Rigid Pipe Threader SN: 2391, 2" capacity, number 208 Tri stand, no dies, in good condition 648 Misc. Belting Used belting, various widths and lengths 649 Misc. Belting Used belting, various widths and lengths 650 Misc. Pulleys (1) 4C 16.0, (2) 2B x 6, (1) 2B x 4.5, (1) 2B x 7.5, (1) 2B x 9.75, (1) 2B x 8, (1) 1B x 11.5, (1) 25V x 1250, (1) 3C75, (1) 4C x 7, (2) 2B x 5.5 651 New Carolina Blower Fan 21" x 52", 12 paddles, 2 11/16" Bore 652 New Carolina Blower Fan 20" x 46", 6 paddles, 3" Bore 653 Carolina Blower Fan 21" x 52", 12 paddles, 2 11/16" Bore, in good condition 654 Carolina Blower Fan 21" x 52", 6 paddles, 2 11/16" Bore, in good condition 655 Truck Tool Box Aluminum, fits any full size bed 656 Waste Chain Detachable chain, includes drive and idler end, in good condition 657 Barn Sweep Chain 14" paddles, in good condition 658 Waste Conveyor Chain 16" paddles, HD, approx. 35', in good condition 659 Waste Conveyor Chain 16" paddles, HD, approx. 20', in good condition 660 Misc. Chain H-130 roof top, drag chain with new paddles, in good condition 661 Mellot Hydraulic Pak Single vane, 12" x 20" x 18" reservoir, 25 hp 3 ph., in good condition 662 Hydraulic Pak Single vane, 40 hp 3 ph., 30" x 36" x 18" reservoir, in good condition 663 Hydraulic Pak Model: PV4290R-32009, SN: 26958, Delavan pump, 25 hp 3 ph., heat exchanger, 27" x 45" x 15" reservoir, no motor on heat exchanger fan, in good condition 664 Hydraulic Pak Single vane, 110 solenoid, 5 hp 3 ph., 10 gallon reservoir, needs maintenance 665 Radiator 43" x 43", 36" fan, 7.5 hp 3 ph. 1155 rpm, dual direction fan, in good condition 666 Continental Hydraulic Power Pak Model: P81-81-898, 35 gallon, vane type, 7.5 hp 3 ph., in good condition 667 KL Hydraulic Reservoir 24" x 36" x 14" capacity, 10 hp 3 ph., no pump, in good condition 668 Hydraulic Unit 11" x 11" x 30" vane type, hp unknown, includes hoses and (2) 10" stroke rams, in good condition 669 Hydraulic Unit Vane type, 10 gallon capacity, 5 hp 3 ph., in good condition 670 Rexroth Reservoir 32" x 52" x 15", in good condition 671 Hydraulic Reservoir 24" x 36" x 12" capacity, in good condition 672 Hydraulic Reservoir 16" x 24" x 16", vane type, 5 hp 3 ph., in good condition 673 Sullair Compressor Model: 25-100 L, SN: 18697-KGD, max psi 110 screw type, 100 hp 3 ph. includes disconnect, in good condition 674 Hydraulic Unit 22" x 43" x 18", vane type, 15 hp 3 ph., in good condition 675 Hydraulic Unit 14" x 25" x 16", vane type, no motor, good condition 676 Racine Reservoir 80 gallon, heat exchanger, in good condition 677 Hydraulic Unit 12" x 29" x 16", vane type, hp unknown, heat exchanger 678 Hydraulic Pump Vane type, 15 hp 3 ph., in good condition 679 Zabel Equipment Hydro Pak Model: ZE30100, SN: 1506, vane type, 10 hp 3 ph., 3 variable speed controls, in good condition 680 Hydraulic Unit 10 gallon, vane type, 2 hp 3 ph., includes 3 Vickers valves, in good condition 681 Mellot Hydraulic Pak 10 gallon, vane type, 10 hp 3 ph., needs maintenance 682 Punch Press Pneumatic clutch, 3 hp 1 ph. 220 volt, disconnect, no dies, in good condition 683 MorBark Chip-Pac 48", RH, 3 knife, no drive on chipper, in good condition 684 Precision Chipper 58", 3 knife, RH, top discharge, needs rebuilt 685 Precision Chipper SN: C-788, 48", RH, 3 knife, top discharge, needs rebuilt 686 Precision Chipper 60", RH, 3 knife, top discharge, needs rebuilt 687 Precision Chipper SN: C2115, 48", RH, 6 knife, top discharge, includes 2 boxes of new knives, in good condition 688 Fulghum Chipper 66", RH, 8 knife, bottom discharge, in good condition 689 Sumner Chipper/Mulcher Model: 35, SN: 1181, 15 1/2" x 16 1/2" intake, includes 75 hp 3 ph., in good condition 690 Scan Hugger Waste Grinder SN: 926412, type: HT 75-60-4, 915 rpm 691 Shutte Hammer Mill Model: 1320, SN: 108, 3600 rpm, includes long sweep elbow, no drive, in good condition 692 1997 ZENO Grinder SN: 97 A-4535, Type: ZTLL1600X, 1800, 1 extra screen, in good condition 693 Chipmaster Chipper Model: 60R, 68", RH, 6 knife, top discharge, in good condition 694 Chipmaster Chipper Model: 75L, SN: 69 10 03, 86", LH, 8 knife, in good condition 695 Jeffrey Hammermill SN: 11899, size: 34WB, 12" x 36" intake, 100 hp 3 ph., in good condition 696 Soderhamn Chipper 68", RH, 6 knife, top discharge, in good condition 698 Fulghum Shaker Screen SN: F1-R-667, 7x7, includes cyclone, 3 hp 3 ph., in good condition 699 Fulghum Shaker Screen SN: F1-R-467, 6x6, 5 hp 3 ph., in good condition 700 Roto Flow Chip Screen 6" x 6", 2 hp 3 ph., in good condition 701 Soderhamn Chip Screen Model: CS-25, SN: 622, 5x5, cyclone, 2 hp 3 ph., needs maintenance 702 Soderhamn Chip Screen Model: CS-27, SN: 268, 7x7, no drive, in good condition 710 Irvington Moore Trimmer Drop saw trimmer, 18' capacity, 40 hp 3 ph., this unit could be line shaft ready, extra blades, chain included, in good condition 711 Morris Drop-Saw Trimmer 18' capacity, 9 individual electric motors, 8" thick capacity, includes drive shaft and chain, no idler, working condition 715 Double End Timmer 9" x 52" capacity, (2) 15 hp 3 ph., has drive but no idlers, in good condition 716 Double End Timmer 9" x 22' capacity, (2) 7.5 hp 3 ph., includes all controls, hydraulic pak, everything intact, needs maintenance 717 Double End Timmer Model: K-25, Newman 9" x 20' capacity, electric drive, no controls, needs to go through shop 718 Double End Timmer 8" x 16' capacity, electric drive with controls, includes 24" x 20' belt conveyor, needs maintenance 719 Moore Tilt Hoist SN: 390-104, 3 arms, 6' x 11" capacity, 2 HD Tulsa winch, electric drive, working condition 720 Tilt Hoist 3 arm, 8' x 9' capacity, HD Tulsa winch, electric drive, in good condition 721 Tilt Hoist 4 arm, 4' x 12' capacity, Falk gear drive, electric drive, in good condition 722 Tilt Hoist 3 arm, 6' x 12', HD Tulsa winch, electric drive, in good condition 723 Tilt Hoist 3 arm, 8' x 12' capacity HD Tulsa winch, electric drive, fully dismanted, in good condition 724 Merchandiser Saw 60" blade capacity. Solid piece! 725 Jacobson Blower Model: 3011-T, SN: 24383, 10" x 20", 25 hp 3 ph 726 Husk* 56" bottom blade, 40" top blade, off bearing belt, type: K3VL40/B hydraulic pump, line shaft ready, in good condition 727 McDonough Band Wheels* 6' D x 10" W, 1" band, in good condition 728 Husk* 7' D x 13" W, top wheel: 1 1/4" band, bottom wheel: 1 1/2" band, includes shaft and mounting brackets, pulley, in good condition. 729 Heardrig Bands* (6) 436", (6) 392" 730 Dodge Reduction Gear* SN: BT184002168, ratio: 141: 28:1, input speed: 1750 rpm, output torque: 123, 914 in-lb max, input power 24 hp max, output shaft 4" x 8.27", A1 mounting. New in crate! 731 Upcut Chopsaw Pneumatic foot petal, no blade, electric drive, in good condition 732 Cyclone 48" x 60", 9" inlet, in good condition 733 Steel Band Chopper 1 hp 1 ph, get rid of your steel banding quickly, in good condition 734 Steel Band Chopper 1 hp 1 ph, get rid of your steel banding quickly, good condition 734A Hershberger Slab Saw Mechanical, 36" insert tooth blade, 18' infeed, line shaft ready, new in Feb. 2022, in good condition 735 Brewco Resaw Model: BBBH, SN: BB2H722, 4H band, 8" x 16" capacity, 3/4" band wheels, hydraulic drive on feed and return belt, bands are line shaft, in good condition 736 Fast Line Resaw Model: FLR1204, SN: 12102-93, 121202-96, 2 head, horizontal band, 20" x 14' belt conveyor, no band wheels, 1 head has wheel spindles, parts machine 737 MW Resaw Single head horizontal 7" x 12' belt conveyor, 20' band wheels, no drive. Working condition 738 Wadkin Bandsaw Resaw Model: PBR H/D, SN: 986, vertical bandsaw, 28" band wheel, tilt bed, 12" capacity, 220 VAC, 3 ph, 50 A, 21 kw, 60 H2, power feed, table is broke off, otherwise in good condition 739 Baghouse 40' x 40' x 9', in good condition 740 1993 Hydraulic Tank 250 gallon, includes vane type pump, 2 hp 3 ph electric motor. Air tank converted to hydraulic tank, in good condition 741 1975 Ingersoll Rand Compressor Model: 25305, SN: 53087, type 30, 2 stage, 80 gallon, 5 hp 3 ph, horizontal, in good condition 742 1999 Air Tank 150 gallon vertical, was used in last 6 months, in good condition 743 1987 Air Tank 200 gallon vertical 744 1954 Ingersoll Rand Compressor Model: 15T, SN: 30T 306612, type 30, 2 stage pump, horizontal, 15 hp 3 ph, has cooling fins, in good condition 745 1986 AJAX Compressor Vertical 60 gallon, twin cylinder pump, 5 hp 1 ph electric, needs new air intake filter hosing otherwise in good condition 746 1976 Air Tank 135 gallon vertical, in good condition 747 1999 Ingersoll Rand Compressor Model: 3000, SN: 00010314, 120 gallon horizontal, 2 stage compressor, cool radiator, 30 hp 3 ph electric, in good condition 748 Blower Fan 18" x 58", 18" x 19" outlet, no inlet plate, motor mount, no drive, in good condition 749 2009 Koger Air Blower Fan Model: CCW-360, SN: KAF-7009, size: 21, 17" x 54", 16" RD inlet, 17 1/2" x 20" SQ outlet, no drive, in good condition 750 GP Fan Dust Blower SN: J-3253, size: 276, 29 1/2" RD inlet, 20 1/2" x 30' outlet, 2 hp 3 ph electric, in good condition 751 Air Lock 14" x 27", HD, stainless steel paddles and inner housing, 7.5 hp 3 ph with reduction gear, in good condition 752 Air Lock 10" x 18" HD, stainless steel paddles and inner housing, motor mount, no drive, in good condition 753 Air Lock 12" RD inlet and outlet, 3 hp 3 ph with reduction gear, in good condition 754 Twin City Fan SN: 81-32667-2-1, size: 28, type: JBA, 16" RD inlet, 16" RD outlet, 125 hp 3 ph electric, in good condition 755 New Klima Blower Fan 14' x 36" D, N motor 1800 rpm, 240 volt, 3 ph 755A New Klima Blower Fan 14' x 36" D, N motor 1800 rpm, 240 volt, 3 ph 755B New Klima Blower Fan 14' x 36" D, N motor 1800 rpm, 240 volt, 3 ph 755C New Klima Blower Fan 14' x 36" D, N motor 1800 rpm, 240 volt, 3 ph 755E New Klima Blower Fan 14' x 36" D, N motor 1800 rpm, 240 volt, 3 ph 755F New Klima Blower Fan 14' x 36" D, N motor 1800 rpm, 240 volt, 3 ph 756 Air Lock 12" RD inlet and outlet, 2 hp 3 ph with reduction gear, some wear 757 Air Lock 12" RD inlet and outlet, motor mount, no drive, includes 24" to 12" reducer, in good condition 758 Dust Blower 6" x 20", 7" RD inlet and outlet, electric drive, hp unknown, in good condition 759 Buffalo Blower SN: 84307562, 60-3 CB, HD pressure blower, 12" RD inlet and 7" x 10" outlet, 40 hp 3 ph, in good condition 760 Dust Blower 4" x 16", 5" inlet, 2 hp 1 ph electric, in good condition 760A Dust Blower 22", 15" outlet, 14" inlet, new shaft and bearings, belt drive, good condition 760B Dust Pipe (5) 10" x 15', 75' total, HD, in good condition 761 Air Tank 500 gallon horizontal, in good condition 762 Air Tank 80 gallon vertical, in good condition 763 1945 Air Compressor 135 gallon horizontal, 1 stage pump, 5 hp 3 ph electric, in good condition 764 Donaldson Dust Bin 36" x 40" x 96", 5 hp 3 ph blower, 8 in.sq. outlet, some wear 765 Fulghum Chip Blower 16" x 44", 40 hp 3 ph electric, good condition 766 Twistair Compressor Model: TA-030BB141TH, SN: M39908, max pressure: 125, 460 volt, 150 gallon horizontal, 30 hp 3 ph, includes starter 767 Phelps Chip Blower Model: MH Chip, SN: 94417, 1800 rpm, 15" x 40", in good condition 768 Phelps Chip Blower 15" x 25", motor mount, in good condition 769 Phelps Chip Blower 15" x 25", motor mount, in good condition 770 Morbark Chip Blower 16" x 42", 18" x 14' discharge pipe, mounting plate, no drive, in good condition 771 Chip Blower 15" x 26", no drive, in good condition 772 Morbark Chip Blower 10" x 28", 12" x 8' discharge pipe, mount plate, 10 hp 3 ph electric, in good condition 773 Chop Saw 34" blade capacity, 26" x 90' belt conveyor, line shaft ready, no blade, in good condition 774 PH Double End Trim Saw 30" blades, 8' cut capacity, 11' log trough, hydraulic reservoir 5 gallon, no drive, in good condition 775 Roll Case (2) 5' x 10', electric drive, in good condition 776 Roll Case 6' x 9', 3 strand, pop-up transfer, hydraulic drive, no drive on rolls, in good condition 777 Morbark Tank 20" x 29" x 48", was set up with Morbark chip pac, (1) single valve control, (1) 2 valve control, like new condition 778 Corley Gang Edger 6" x 24" capacity, 5 fixed blades, 2 moveable, power infeed and outfeed, electric drive, 30" x 22', 6" x 22' tail belt, electric drive, 6' x 10' roll case with 2 strand pop up transfer (edger infeed) electric drive, 2 skids of extra blades and spacers, in good condition 779 Schurman Gang Saw Model: 10.SBA48, SN: 3014, 11" x 48" capacity, 23 blades installed, power infeed and oufeed, no drive, line shaft ready, outfeed has minor fire damage 780 Roll Case 65" x 20" roll case, 6 strand pop up transfer, idler end, no drive on transfer, hydraulic drive on roll case, was used with Schurman Gang saw (lot 779) 781 Cook Gang Edger 6" x 42" capacity, 40" x 96' outfeed, line shaft ready, extra blades and spacers, no blade guides, 4 fixed and 1 moveable, in good condition 782 Euford Edger 6" x 36" capacity, electric drive, two independent sliding arbors, lasers, includes 10' infeed and 20' tailing belt, 9 extra blades, 18" diameter, in good condition 783 Cornell CLB Saw Model: CLB-BX, SN: 00-2-8-86, 10" thick capacity, linear positioning infeed, electric drive, includes 5' x 10' 4 strand transfer, 4' x 10' 3 strand tilt transfer, 30" x 10' roll case (infeed) electric drive, all controls, in good condition 785 Gang Saw 6" x 40" capacity, 5 fixed blades, 36" x 44" infeed, line shaft ready, in good condition 786 Corley Gang Edger SN: 66-HP-004, 6" x 20" capacity, 54" x 96" infeed, 54" x 34" outfeed, electric drive on infeed, no drive on gang, needs rebuilt 787 Brewer Gang Saw 6" x 32" capacity, (1) 75 hp 3 ph, 4 fixed blades, with sizer ready, 30 hp 3 ph, in good condition 788 Shurman Gang Edger 6" x 48" capacity, 4 fixed and 1 moveable blade, 4' x 7' outfeed, 4' x 8' infeed, line shaft ready, in good condition 789 Ukiah Edger Model: 10BAS, SN: 8242, 10" x 27" capacity, 5 fixed, 2 moveable, 150 hp 3 ph, in good condition 790 Cornell Gang Edger Model: 660ED, SN: 252-1-5-89, 8" x 27" capacity, 5 fixed, 2 moveable, 150 hp 3 ph, working condition 791 Brewco Gang Sizer SN: HNEH0002, 4" x 12" capacity, linear positioning gang, linear positioning sizer, hydraulic drive on infeed, electric drive on gang, in good condition 792 Debarker Rosser head, flat track electric drive on head, includes barn sweep waste conveyor and controls, needs rebuilt 793 Fulghum Debarker Model: 618, SN: F1-00-440, Rosser head, electric drive on head, 14' log capacity, controls, another Fulghum debarker for parts, needs rebuilt 795 Debarker SN: F161332, Rosser head, electric drive on head, slant track, 16' capacity, cab and controls, needs rebuilt 796 Hosmer Debarker Model: V-206-H, SN: V.206.135, Rosser head, electric drive on head, 16' capacity, complete unit, needs rebuilt 797 Morbark Debarker Model: 636, SN: 285, post peeler type, electric drive, no controls, needs rebuilt 798 Debarker Rosser head, electric drive on head, flat track, pentagraph, no cab or controls, needs rebuilt 799 HMC Debarker Model: V-206, SN: 9422, Rosser head, electric drive on head, flat track, cab and controls, complete unit, needs rebuilt 800 Precision Debarker Electric drive on head, flat track, waste conveyor, cab and control, complete unit, needs rebuilt 801 Mellot Debarker* Model: 200, SN: 872001378, type: 8, Rosserhead, electric drive on head, needs rebuilt 803 HMC Debarker Model: V206, SN: 196297, no head, slant track, frame and bulls wheels only 804 Hosmer Debarker Model: V-206-HL, SN: V.206.269, Rosser head, electric drive on head, electric drive on bull wheels, electric over hydraulic on power feed, controls, includes barn sweep waste conveyor, needs rebuilt 805 1995 Mellot Debarker Model: 200, SN: 94200311, Type: 10 Rosser head, all hydraulic, pantograph, no cab or controls, needs rebuilt 806 2005 West Plains Roll Case Model: WPRS-RC, SN: 1433, 15" x 14' roll case, 4 1/2" rolls, electric drive, was used with a resaw system, almost new condition 807 Roll Case 53" x 16', 8 1/2" rolls, 4 pop up transfer, in good condition 808 Belt Conveyor 16" x 15', electric drive with reduction gear, in good condition 809 Belt Conveyor 14" x 10', waste belt, incline, electric drive, in good condition 810 Waste Conveyor 10" paddles, 48' long, WS78 chain, with incline, electric drive, in good condition 811 Waste Conveyor 11" ladder back chain 812 Log Trough 6" ladder back chain, 40' long, 5' tall, no drive, in good condition 814 Waste Conveyor 13 1/2" paddles, 38' long, includes 11' legs, electric drive with right angle gear reducer, 31-8 815 Belt Conveyor 38" x 17', no drive, needs new belt, in good condition 816 Meadows Belt Conveyor 32" x 60" belt conveyor, 32" x 96" panning, used as outfeed on edger, no drive, has some wear but in good condition 817 HMC Drop Belt Model: BC96, SN: 3185663, 30" x 13', no drive 818 Concave Belt Conveyor 33" x 36', electric drive 819 Belt Conveyor 14" x 10', electric drive, in good condition 820 Belt Conveyor 8" x 17', no drive, in good condition 821 JB Hammermill Size: 20, Stock: 1708, Pto belt drive, includes 7 screens, cyclone, bagger chute, bags, and belting. Always stored inside, good condition 822 Blower Fan 12" x 36", 14" inlet, 12" outlet, line shaft ready, in good condition 824 Mellot Log Turner 36", chain type hydraulic drive, in good condition 825 Renco Log Turner 36", chain type hydraulic drive, in good condition 826 Mellot Log Turner 36", chain type hydraulic drive, in good condition 827 Belt Conveyor 6" x 28', electric drive, in good condition 828 Belt Conveyor 8" x 14' belt with 6" x 11' roll case with tilt, set up as on out feed for edger, in good condition 829 Belt Conveyor 4" x 12' edger outfeed, hydraulic drive, in good condition 829A Vibrating Conveyor 18" pan, 6" sides, 65' long, bar screen, electric drive, in good condition 830 Webster Vibrating Conveyor Model: FSM, SN: 842-1863-5, size: 18-24, 40' long with chipper infeed, hydraulic drive, in rough condition 829B Belt Conveyor 13" x 29' 3" sides with trash hopper, no drive, in good condition 831 Belt Conveyor 14' x 27', electric drive, needs new belt, in good condition 832 Dead Rolls (1) 44" x 64", (1) 44" x 120", (1) 46" x 76", in good condition 834 Edger Infeed 8" x 24" rolls, 10' long, linear positioning infeed, hydraulic drive, heavy duty, in good condition 835 Roll Case 8 1/2" x 42" rolls, 14' long, frame is 22' x 8', includes 4 strand board kicker, hydraulic drive, in good condition 836 Roll Case 4 1/2" x 18", 16' long rolls, are on an angle, hydraulic drive, in good condition 837 Tilt Dead Rolls 2" x 18 1/2" rolls, 20' long, in good condition 838 Dead Rolls (1) 2" x 26" rolls, 6' long, (1) 2 1/2" x 6", 11' long, in good condition 839 Roll Case 7" x 48" rolls, 13' long with reduction gear, no drive, HD, in good condition 840 Resaw Return 6 1/2" x 20" rolls, 2 strand pop-up transfer, hydraulic drive, no drive on rollers, in good condition 841 Roll Case 20" x 5', electric drive, in good condition 842 Roll Case 4" x 10", 8' long, no drive, in good condition 843 Roll Case 4 1/2" x 12" rolls, 20' long, hydraulic drive, includes 3 arm board kicker, pneumatic, in good condition 844 Unscrambler 5 strand, 8' x 11'6", WS78 chain, no drive, in good condition 845 Unscrambler 5 strand, 8' x 13', 7'6" tall, 81X chain, electric drive, in good condition 846 Roll Case 6 1/2" x 36" rolls, 16' long, rolls are on slant, includes drive for 6 strand transfer, no idler, electric drive, in good condition 847 Unscrambler 7 strand, 10' x 16', 9'3" tall with 6" x 24" rolls, rolls at a slant, electric drive, in good condition 848 Dead Rolls 6 1/2" x 64 x 21' long, in good condition 851 Catwalk 33" x 37', in good condition 852 Aluminum Grating (10) 1 3/4" x 21" x 34 3/4", 1 3/4 x 19 x 41, 1 3/4" x 25" x 35 3/4, 1 3/4 x 14 1/2 x 21", in good condition 853 CTR Delimber 42" buck saw, in good condition 854 Spiral Staircase 80" D x 11' T, in good condition 855 3 Strand Log Deck 10' x 17' log deck with Tulsa winch drive, stop'n'load 856 Log Trough 30' long, electric drive, heavy duty, 5" wide chain for narrow logs, in very good condition 857 New Stock Equipment 6 Gear Box 1887 rpm, 86. 43:1 ratio 858 Transfer Deck 10' x 19'6", 3 strand, electric drive 859 4 Strand Green Chain 23' long, C-188 chain, electric drive, no drive shaft 860 Transfer Deck 6 Stand 14' x 26' long, in good condition 861 2 Strand Transfer Deck 3' wide x 24' long, electric drive, in good condition 862 4 Strand Log Deck 9'6" wide x 24' long, rooftop chain, in good condition 863 2 Strand Transfer Deck SN: 9998, 4'6" wide x 21', electric drive with tulsa winch, in good condition 864 6 Strand Transfer 12 1/2' wide x 7' long, electric drive, 81X chain, air operated, cant stops, in good condition 865 4 Strand Transfer Deck H78 chain, 11'6" wide x 40' long, gear box drive, in good conition 866 5 Strand Log Deck 13'6" wide x 50' long, electric drive, heavy duty, in good condition 867 4 Strand Transfer Deck 13' wide x 8' long, electric drive, in good condition 868 5 Strand Log Deck SN: 9848, 17' wide x 38' long, stop'n'load, electric gear box drive, in good condition 869 4 Strand Transfer Deck 11' wide x 27' long, hydraulic drive, H-130 chain, cant stops, in good condition 870 6 Strand Transfer Deck Model: Hosmer, 14' x 10' long, electric drive, manual stops, in good condition 871 4 Strand Transfer Deck 12' wide x 23', with drive 872 6 Strand Transfer Deck 13'5" wide x 10' long, electric drive 873 4 Strand Log Deck Chain included, no drive, has drive shaft, 13' wide x 20' long 874 3 Strand Green Chain 10'8" wide x 30', gear box drive, C-188 chain, in good condition 875 4 Strand Transfer Deck SN: 9040, 10'6" wide x 38' long, electric drive, H78 chain, in good condition 876 4 Strand Grading Deck SN: 9981, 13' wide x 20' long, C55 chain, electric drive, in good condition 877 4 Strand Transfer Deck SN: 9753, 40' long, electric S-drive, 81X chain, good chain 878 5 Strand Green Chain 14' wide x 82' long, electric drive, side-roller tape, chain on outside strands, in good condition 879 4 Strand Transfer Deck SN: 9973, 9'6" wide x 24' long, rooftop chain, electric tulsa winch drive, in good condition 880 3 Strand Transfer Deck 8' wide x 70' long, electric drive 881 2 Strand Transfer Deck 5'6" wide x 10' 10" long, has cant stop, hydraulic stop 882 Green Chain 10' x 17' 4 strand, (1) 8LX chain, 3 rooftop chain, in good condition 883 2 Strand Transfer Deck 29" x 25', 13' has its own drive, 12' has its own drive, hydraulic drive, was used to transfer from chopsaw to gangsaw, in good condition 884 Fuel Tank 3' x 5', no leaks, 300 gallon, in good condition 885 Saw Dust Bin* 10' x 10' x 16', 24" rack/pinion slide gate, includes stirrator, electric drive, in good condition 886 Doyle Log Scale* 48" log scaler, in good condition 887 Doyle Log Scale* 48" log scaler, in good condition 888 Doyle Log Scale* 36" log scaler, in good condition 889 Log Decimal Scale* 36" log scaler, in good condition 889A Doyle Scribner* 36" log scaler, in good condition 890 Lumber Grader* 36", 3 line, in good condition 891 Lumber Grader* 36", 3 line, in good condition 892 Lumber Grader* 24", 4 line, in good condition 893 Hydraulic Tank* 40 gallon, was used on feed truck, in good condition 894 PTO Shaft* 8 series, 8" x 46" 1 3/8" 21 Spl QD BE, all purpose driveline, includes 2 jack shafts, 2 3/16" shafts, B6 15" pulley, B6 9" pulley, in good condition 895 Lincoln Electric Motor* 50 hp, 1765 rpm, frame: 326T, includes C4 9" pulley, in good condition 896 Lincoln Electric Motor* 75 hp, frame: 405T, with B4 12" pulley, includes motor mount, in good condition 897 Reduction Gear* 1 7/8" output shaft at 14 rpm, includes c-phase mount 2 hp electric motor 3 ph, in good condition 898 Electric Motor* 5.5 hp, 1750 rpm, frame: 213T, B2 3 1/2" pulley, in good condition 899 Lincoln Electric Motor* 15 hp, 1750 rpm, frame: 254T, B2 10" pulley, in good condition 900 Pallet of Disconnects* 3 ph disconnects, (2) 30 amp, (1) 60 amp, (1) 100 amp 903 Hydraulic Reservoir* 21" x 59" x 29", in good condition 904 Hydraulic Pump* (1) vane type, (1) pressure compressor with 60 hp 3 ph electric motor on frame, in good condition 905 Clarage Dust Blower* Number 25, 20" x 58", 24" Rnd inlet, 21" x 22" outlet, belt drive, some wear 905A Air Intake Valve* 20 1/2" x 22 inlet, 24" rd outlet, 50" tall, in good condition 905B Cyclone* 8' x 31', 24" inlet, 26" x 44" air return, 16" outlet, access door, in good condition 905C Blower Pipe* 24", (1) 90 elbow, (2) 45 degree elbows, (1) 10', (1) 51", (1) 34", in good condition 906 Heat Exchanger* Model: AOVHM-40, SN: C132526, 10" x 41 1/2" x 38", 300 psi, hydraulic drive on fan, includes stand, in good condition 907 Belt Conveyor* 36" x 42', 36" tall, electric drive, in good condition 908 Cyclone* 42" x 9', 10" inlet, 16" outlet, stand included, in good condition 909 Rotex Shaker Screen* 5' x 14', 17' overall, hp unknown electric drive, used to separate chips from sawdust, in good condition 910 Cyclone* 6' x 12'8", 10" inlet, 18" outlet, in good condition 911 Sawdust Blower* 9" x 28", 8" inlet, 8" outlet, motor mount, no drive, some wear 912 Allis Chalmers Silage Blower Electric drive, includes 48' of 8" pipe, in good condition 913 Conveyor* 5' x 18', 4' tall capacity, 9'7" overall height, no drive, some wear but in good condition 914 Clipper Belt Lacer SN: 123644, No. 3"-6" 915 Clipper Belt Lacer SN: 76205, No. 3"-6" 916 Hanchett Swage and Armstrong Setter Swage, No. 55 setter, 6900 B, in good condition 917 Hanchett Swage and Setter SN: 5058, setter No. 8 band shaper, in good condition 918 Manual Saw Filer In good condition 919 Jockey Grinder Electric drive, in good condition 920 Jockey Grinder Electric drive, in good condition 921 Makita Grinder Electric drive, in good condition 922 Steel Strapping Tools In good condition 923 Steel Strapping Tools In good condition 924 Steel Strapping Tools In good condition 925 Steel Strapping Tools In good condition 926 Steel Strapping Tools In good condition 927 Steel Strapping Tools No tensioner, in good condition 928 Pallet Nailer (2) Bostich pneumatic nailers, in good condition 929 Pallet Nailer (1) max good condition, (1) Bostitch, bad seal 930 Simonds Teeth Shanks (50) F-8, (50) B-8, in good condition 931 New Simonds Saw Bits (300) 9/32, carbide dipped 932 New Treated Yellow Pine Posts (100) 3 1/2" x 7' 933 New Treated Yellow Pine Posts (100) 3 1/2" x 7' 934 New Treated Yellow Pine Posts (100) 3 1/2" x 7' 935 New Treated Yellow Pine Posts (100) 3 1/2" x 7' 936 New Treated Yellow Pine Posts (100) 3 1/2" x 7' 937 New Treated Yellow Pine Posts (100) 3 1/2" x 7' 938 New Treated Yellow Pine Posts (100) 3 1/2" x 7' 939 New Treated Yellow Pine Posts (100) 3 1/2" x 7' 940 New Treated Yellow Pine Posts (100) 3 1/2" x 7' 941 New Treated Yellow Pine Posts 7 1/2" x 8' 942 New Treated Yellow Pine Posts 7 1/2" x 8' 943 New Treated Yellow Pine Posts 7 1/2" x 8' 944 New Treated Yellow Pine Posts 7 1/2" x 8' 945 New Treated Yellow Pine Posts 7 1/2" x 8' 946 New Treated Yellow Pine Posts 7 1/2" x 8' 947 New Treated Yellow Pine Posts 7 1/2" x 8' 948 New Treated Yellow Pine Posts 7 1/2" x 8' 949 New Treated Yellow Pine Posts 7 1/2" x 8' 949A New Farm Gate 50” x 16’ , 1 ¾” round tube 14GA, includes hangers 949B New Farm Gate 50” x 16’ , 1 ¾” round tube 14GA, includes hangers 950 Cant Stacker/Sorter 7' x 20'6", 10'4" tall, no drive, like new condition 951 Aluminum Waste Conveyor 5" x 16', single chain, rubber paddles, no drive, in good condition 952 Roll Case 11" x 36" rolls, 5 rolls, 14'3" long, hp, no drive, in good condition 953 Webster Vibrating Conveyor 17" pan, 6" sides, 21' long, burr screen, chipper infeed, no drive, in good condition 954 Jay Bee Hammer Mill 13 1/2 x 19 1/2 intake 955 Roberts Mill Hammermill SN: 761, 3600 rpm, top feed style, 60 hp 3 ph electric, just came out of production, in good condition 956 Aerovent Blower SN: 8705494-001, 17" x 48", top discharge, 20 hp electric drive, 20" intake, 17" x 18" outlet, in good condition 957 Lumber Cart* 30" x 60" x 45", rubber wheels, in good condition 958 Lumber Cart* 27" x 46" x 48", swivel wheels on one end, in good condition 959 Lumber Cart* 42" x 84" x 48", stop on one end, in good condition 960 Lumber Cart* 42" x 84" x 48", stop on one end, in good condition 961 Lumber Cart* 42" x 96" x 48", stop on one end, in good condition 962 Lumber Cart* 42" x 96" x 48", stop on one end, in good condition 962A Lumber Cart* 3ft x 6ft, railroad cart style 962B Lumber Cart* 3ft x 6ft, railroad cart style 963 MMT Notcher* Model: 150A, SN: 247, single head, 15 hp 3 ph, electric drive, in good condition 964 Belt Conveyor* 10" x 35', electric drive, in good condition 965 Belt Conveyor* 16" x 24' cleated belt, hydraulic drive, dust cover. Has some wear but in good condition 966 Baker Resaw Parts* Belt, arbor, in good condition 967 Jones Saw Grinder* Electric drive, includes holder for electric grinder, band saw tooth setter, in good condition 968 Banding Cart* Deluxe, on wheels, in good condition 969 Dust Blower* 11" x 40", 12" inlet, 10" outlet, 15 hp 3 ph electric, in good condition 970 Cooks Band Roller* In very good condition 971 Cooks Cat Claw Sharpener* Electric drive, in very good condition 972 Manual Strapping Tool* MIP 499, in good condition 973 Manual Strapping Tool* MIP 499, in good condition 974 Manual Strapping Tool* Mul-20, used for steel strapping, in good condition 975 Manual Strapping Tool* Mul-20, used for steel strapping, in good condition 976 Manual Strapping Tool* Mul-20, used for steel strapping, in good condition 977 Manual Strapping Tool* Mul-20, used for steel strapping, in good condition 978 Bosch Strapping Tool* Battery powered, includes 2 batterys and charger, plastic only, in good condition 979 Bosch Strapping Tool* Battery powered, includes 2 batters and charger, plastic only, in good condition 980 Steel Banding Clamps* 1/2" clamps, 3/4 box full, includes 1 manual clamp clincher, in good condition 981 Plastic Strapping* 1/2" x 3/4 full roll, in good condition 982 Cant Edger* 4" x 20" capacity, 4 fixed blades, electric drive, hydraulic drive on infeed and outfeed, self contained hydraulic pak, shop built, box of extra blades, in very good condition 983 Belt Conveyor* 26" x 42', no drive, in good condition 984 Post Pointer* 2" D capacity, electric drive, includes hydraulic pak and disconnect, in good condition 985 Banding Cart* Includes some steel banding, in good condition 986 Banding Cart* Almost new and in good condition 987 Steel Banding* 5/8" x full roll, almost new condition 988 Fulghum Chip Screen* 5x5, electric drive, includes cyclone, last in production 2021, in good condition 989 Morbark Chipper* Model: 348, SN: W359, 3 knife, RH, top discharge, no drive, last in production 2021, in good condition 990 Sawdust Dryer* Furnace 8' x 14', 8'6" tall, weight: 26000 lbs., 3 infeed augers, electric drive, fully line with heat bricks, blower, 38" x 16' pipe lined with heat bricks, 8' x 24' sawdust tumbler, 40" inlet, 24" outlet, electric drive, weight: 22000 lbs., total length: 30', 38" x 8' pipe lined with crete, 10000 lbs, (as is) 991 Belt* 30" x 142', 1/8" thick, in good condition 992 Roll Case Transfer* 4" x 26" rolls, 11' long, 5 strand pop up transfer, #40 chain, all mechanical, line shaft ready, includes 24" x 10' belt conveyor with hold down, no drive, in new condition 993 Steel Platform* 5'6" x 11'2", includes steps, 42' railing, in good condition 994 Froedge Deduster* 4" x 7" capacity, line shaft ready, in good condition 995 Shipping Container* 8' x 8' x 20, used and in good condition 996 Shipping Container* 8' x 8' x 20, used, new paint inside, in good condition

Close X

Gallery Images Loading, Please Wait...

Close X

Save this sale to your Saved Sales list!

Your Saved Sales list is an easy way to return to sale listings which are of interest to you.

Login

Username:

Password:

Sign Up

FREE EMAIL NOTIFICATIONS
auction listings delivered to your inbox

Close X

Sign Up

FREE EMAIL NOTIFICATIONS
auction listings delivered to your inbox

Login

Username:

Password:

Return

Showcase Equipment Auction & Expo

Live Auction

View Gallery (222)

Auction Date(s)

Friday Sep 15, 2023 Completed

Auction Location

Wolcottville, IN 46795

View Map

Company

Bright Star Realty and Auctions, INC

Contact: Loren Beachy
Phone: 574-825-0704
Website: brightstarauctions.com

Listing Terms and Conditions

Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded where required.
Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer:

Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.
Governing Law.
1. For Auctions in the State of Indiana and Online. Unless otherwise indicated, all Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are deemed to be entered into in the State of Indiana, all bids and payments are deemed to be received in the State of Indiana, and the contract, if any, will be deemed to be formed and entered into in the State of Indiana.
Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.
Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
Nature of the Auction. This Property is being sold at the Auction in the manner indicated on the first page of this Agreement.
Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
2. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
3. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
4. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
5. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
6. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
7. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
8. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.
9. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties, (i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
10. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
11. No Reduction or Retraction of Online Bids. Online bids may not be reduced or retracted.
12. Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.

1. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.
Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). All prebids and maxbids placed online are considered absentee bids. Auctioneer pledges complete integrity in the treatment of absentee bids and absentee bids may be initiated and advanced in accordance with Auctioneer’s policies and procedures. Auctioneer has the right to initiate any absentee bids at 25% to 50% of their maximum amount. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot of Personal Property will be the Buyer of such Property.
All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.

Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or representation by Auctioneer.
Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ringman, or multiple bid assistants or ringmen, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked-Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases are due upon receipt of your invoice. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. If onsite bidders wish to send a wire, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.
Wire Transfer Payments. Buyer shall obtain verbal verification of all bank account information from Bright Star Auctions prior to initiating transfer. Except as otherwise provided by law, we shall not be liable for any loss or damage due to misplaced, unauthorized or fraudulent fund transfers.
ACH/eCheck Payments. By providing account information to Bright Star Auctions, buyer gives permission for Bright Star Auctions to retain payment information on file and represents they are the authorized account holder. Upon authorization to collect payment from Buyers account and prior to transfer, Buyer is responsible to notify their financial institution of the impending transaction. Buyer agrees to notify Bright Star Auctions of any changes in account information.
Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.

No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Tools, packing material, and/or assistance will not be supplied at Pickup, so Buyer must plan accordingly. Disassembly and removal shall be done in a quiet and workmanlike manner, and each Buyer, in making its bid, shall thereby indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer’s employees, agents, representatives, or independent contractors in connection with the Pickup. Any and all damages to the Pickup site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller. Each Buyer must show a copy of the invoice (digital or hard copy) and government-issued photo identification before Lots will be released. No Buyer shall bring pets or young children to the Pickup, as the movement of Lots presents an extremely high-risk environment that could result in injury or death.
Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them. In addition, Buyer’s bidding privileges may be suspended at future auctions.
Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.
Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled to specific performance or other equitable relief.
Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim or suit relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their rights.

Preview Information
Monday to Friday from 7AM to 3PM. Contact Mervin to set up an appointment 260-599-8369
Location of auction: 206 E Vine St., Wolcottville, IN 46795

Heavy Equipment Key Set 36 Keys
Shipping available for $20

Manual Sealless Steel Strapping Tool
Model A333, works for 1/2" 5/8" or 3/4" banding, new in box. Shipping available for $30

510

Logging Cart
Draft horse logging cart, steel wheels, air tires are available if so desired, new condition

511

John Deere Skidder
SN: DW540EC548898, meter reads: 27020, cable skidder, 1/2" cable, 7' blade, 23.1-26 tires, good strong machine, in good condition

512

John Deere Skidder
Model: JD740, grapple and cable, 3/4" cable, 112" blade, 30.5L-32 tires, rotary grapple, enclosed cab and heat, 2 way blade, in very good condition

520

521

522

Ditch Witch 3700DD Trencher
SN: 3T0365, Meter reads: 1994 hours, 64" 6 way blade, 6" x 36" trench cut, pto ROPS, 2 new tires, has leak in transmission, operates as it should. In good condition

523

Trailer
6' x 11' tilt bed, single axle, brakes are inoperable. In good condition. No title, bill of sale only

527

Loader Forks
JRB 4' long. In good condition

536

Loader Forks
12' x 43", in good condition

528

New Skid Steer Bucket
72", chain ready, by Trailside Metal Works

529

New Skid Steer Bucket
78", chain ready, by Trailside Metal Works

529B

New 83" Steinsammler

529C

New 83" Steinsammler

530

Loader Forks
12' x 43", in good condition

531

La-Mar Log Grapple
SN: 0026, skid loader attachment, 1/2" cable, variable control on cable, quick release winch, like new condition

532

Crawler Loader Bucket
1 3/4 cu.yd. top pivot style, needs new hydraulic hoses, in good condition

533

New Holland Hoe Bucket
34" wide, in good condition

534

Logging Forks
Floating forks skid loader attachment, 2” x 6” x 48" long, 12000 lb. capacity, includes welded on chain hooks, welded 2" ball hitch, back blade to keep your trail graded

535

New Skid Loader Attachment Grader
72" wide x 64" long x 18" tall, 2 adjustable blades, dual attachment plates

535A

New Pull Type Grader
Lawn mower or mini pony, 42" wide x 48" long x 8" tall, dual hookup

535B

New Grader
7' grader, has hookup on both ends, lightly used condition

536

540

2023 New/One-trip 20' Standard Container
RXCU1023851, 20' long, double doors on one end

541

2023 New/One-trip 20' Standard Container
HPCU2271820, 20' long, double doors on one end

551

New Aluminum Fuel Tank
150 gallon tank, includes stand and hose.

552

553

Morbark Chip Pak
Model: 3-48, SN: 529, 48", RH, 3 knife, no drive on chipper or shaker, reconditioned by seller, in good condition. Contact Myron Nissley with any questions 574-536-2481

554

New Accu-Cut Edger
4" x 36" capacity, HP electric motor, plug and play

554A

554B

New 2023 Pro-Cut Resaw*
Single head resaw with return, electric drive

555

New Whirlwind Cyclone
48" D, 10" inlet

556

New Whirlwind Blower
SW-12 10" inlet

557

Brand New Supreme MFG Live Roll Case
20" x 20', very heavy duty, electric drive

558

Brand New Supreme MFG Lumber Cart
Very heavy duty, 42" x 92"

558A

Brand New Supreme MFG Lumber Cart
Very heavy duty, 42" x 92"

558B

Brand New Supreme MFG Lumber Cart
Very heavy duty, 42" x 92"

558C

Brand New Supreme MFG Lumber Cart
Very heavy duty, 42" x 92"

558D

Brand New Supreme MFG Lumber Cart
Very heavy duty, 42" x 92"

558E

Brand New Supreme MFG Lumber Cart
Very heavy duty, 42" x 92"

561

New Self Dumping Hopper
3/4 yard fork lift pockets

562

New Self Dumping Hopper
1 yard, fork lift pockets

563

New Self Dumping Hopper
1 1/2 yard fork lift pockets

564

New Self Dumping Hopper
2 yard, fork lift pockets

565

New Self Dumping Hopper
2 1/2 yard, fork lift pockets

566

New Self Dumping Hopper
3 yard, fork lift pockets

567

New Self Dumping Hopper
Heavy Duty, 4 yard, fork lift pockets

568

New Self Dumping Hopper
Heavy Duty, 5 yard, fork lift pockets

569

Dynamic Grinder
Model: 5240HZ, SN 5240H21008110620, 425 HP, 1591 hours, year 2011, Volvo Penta engine, 37,640 total weight, this unit is totally portable, good running condition

571

Portable Bandmill
28" cut, 670 cc predator, 20' trave, 12 volt setworks, extra bands, in good condition

572

Cleereman Carriage
3 HB, 12' carriage, pneumatic 60' track, no setworks, in good condition

573

1996 Lane Carriage
Model: 336, SN: 56700196224, 4 hb, 14' carriage, hydraulic dogs, 10 gallon reseviour, electric drive, 60' track, working condition

574

Renco Carriage
4 HB, 20' carriage, air dogs, hydraulic setworks, 5 gallon reservoir, electric drive, working condition

575

Meadows Track and Carriage
3 HB handset, 14' carriage, husk, 60' track, in good condition

576

Helle Mill
3 HB, 14' carriage, fully hydraulic, 60' track, hydraulic pak, top and bottom blade husk, cab and controls, a complete setup log turner, in good condition

577

Renco Mill*
4 hb, 2 have air dogs, 3' x 15' carriage, 45' track, husk with Tyrone Berry drive, 56" blade, cab controls, no cab, electric drive on carriage, no drive husk, in good condition

578

Mater Carriage*
4 hb, hydraulic and air operated, 60' track, carriage feed

579

Salem Carriage*
SN: 14824991, 3 HB, 48" linear position headblocks, Tong dog, Air dogs, 15' long, 2 HB recently replaced, includes pantograph, in good condition.

580

Meadows Mill*
2 HB, electric setworks, includes 40' track, carriage drive, husk, cab and controls, in good condition

580A

Corley Circle Mill*
3 HB handset, RH friction feed, complete portable mill, 36' track, husk with 50" blade, log turner, blower, hydraulic reservoir, line shaft ready, in good condition

581

582

583

5.9 Cummins Power Unit
190 hp, 1220 hours, electronic governor, no clutch, #2 bell housing, 11" drive, in very good condition

584

International Harvester Diesel Power Unit
Model: UD360
SN: 6660001U009575
About 210 hp, has twin disc clutch, all new filters. Good running condition

584A

855 Cummins
240 hp, clutch and radiator, 10GE pulley, runs good, but has a water leak

585

John Deere Power Unit
Model: 4045HF285.
SN: PE4045L037422.
Meter reads: 8,430 hours.
140 hp at 2400 rpm, twin disc clutch, brand new oil pump, excellent running condition

586

Brewer Transfer
3 strand, 3' x 14', C55 chain, electric drive, in good condition

587

Helle Log Deck
7 x 22, 2 strand H78 chain, with tulsa winch and hydraulic drive, stop'n'load, legs on load side are detached, in good condition

588

Brewer Unscrambler
4 strand, 6' x 7' x 4', electric drive, in good condition

589

Transfer
3' x 16', 3 strand, includes gear reducer with c-phase mount, in good condition

590

Belt Conveyor
12" x 20', no belt, includes reduction gear with c-phase mount, in good condition

591

Belt Conveyor
12" x 15', smooth belt, no drive, in good condition

592

Transfer
7" x 11", 3 strand, C55 chain, includes 3 ph 3 hp motor with gear reducer, good solid piece

593

Rees Airlock
Model: RV-16, SN: 90-620-119, 16", includes 3 ph 2 hp motor with reduction gear, in good condition

594

Steel Hopper
30" x 39" infeed, 37" tall, was used as infeed on hog, in good condition

595

Shaving Bin
5' x 5' x 9'6" tall, includes 18" x 18" slide gate, a 21" x 60" cyclone with 9" intake, in good condition

596

Montgomery Blo-Hog
5" x 10" infeed, includes 8" x 10' Webster vibrating with 6" sides, electric drive, in good condition

597

Helle Vertical Edger
2 moveable blades, 5" capacity, electric drive, in good condition

598

Helle Log Turner
3' long, chain type hydraulic drive, in good condition

599

Pallet
Carriage drive, hydraulic pump, control valve, in good condition

600

Chicago Press Brake
Model: 135, SN: L15915, 15 ton, 6" throat, 4' wide, mechanical, 1 hp single ph, no dies, in good condition

601

W.A. Whitney Punch Press
Model: 812-630, SN: 812-630-20286, 150 ton, 12" throat, 1" capacity, includes hydraulic pump with 30 hp 3 ph electric, in good condition

601A

South Bend Precision Lathe
Model: A, SN: CL 770R, 7/8" through, 30" capacity, 3 jaw chuck, threading, tool post, tooling, variable speed, electric drive, in good condition

602

Chicago Press Brake
Model: 135, SN: L-15413, 15 ton, 6" throat, 4' wide, mechanical, 3/4 hp 3 ph electric, no dies, in good condition

603

Universal Mill
Horizontal/vertical mill, 12 x 60 table, 38in travel, includes arbor for horizontal mill, power feed, in very good condition

604

Manford Mill
Model: 3KV, SN: 891117, 10" x 50" bed, manual feed, includes taper collect set and some tooling electric drive, digital readout, in good condition

605

606

Heska Vertical Bandsaw
Model: ESU 6, SN: 773204, 1 1/2" x 25" band wheel tilt bed, bed has 10" travel, electric drive, in good condition

607

Bronx England Press Brake
Model: 4358, SN: 23568, type: 13, 10 ton 6" throat, 4' wide, no dies, 3 hp 3 ph electric mechanical, in good condition

608

TOS Mill
Model: FA3AV, SN: 12540, 12" x 54" bed, digital readout, power feed, electric drive, in good condition

609

Diehl Machinery double end saw
Model DE-92, SN: 73M-3240-2516, Bore and chucking machine, 7 travel, has its own hydraulics, electric drive, in good condition

610

Grob Inc. Vertical Bandsaw
SN: 10120, Type: NS18, 1 1/2" x 18" band wheel, tilt bed, electric drive, in good condition

616

Electric Motor
Weg 75, 3 ph 1780 rpm, 364/ST WT. 775

617

Reeves Reduction Gear
10/1 ratio, right angle warm reducer, in good condition

618

Electric Motor
WEG, 5 hp 3 ph 1755 rpm, 182/4T, in good condition

619

Vibrating Conveyor
2' x 10' with chipper in feed, conveyor drive, no power, in good condition

620

Vibrating Conveyor
16" x 10', 1 section only, parts only

621

Morbark Chip Blower
Model: 079, 16 1/2" x 16 1/2" outfeed, reconditioned by Showcase Equipment, no motor

628

Welding Table
3/8" x 34' x 57", in good condition

629

Engine Hoist
2T capacity, 1 is like new, in working condition

630

Couplamatic Crimper
SN: 47878, includes various fittings, in working condition

631

Pallet of Pulleys
(1) G180R with hub, (2) 2TB184, (1) 2A18.08K, (1) 2B 16", (2) 2AK104h, (1)2TB60 with hub, (2) 1B 6.8 SDS with hub, (2) 6.8 2 BSPS, (1) 4B52 SD with hub

632

Pallet of Pulleys
(1) 20-5-C with F-hub, (2) 8C10.0, (1) B6 12.5, (1) B314, (1) B218, (1) 2C10, (1) 8B 9.5, (1) 3B7, (1) 4B x 9.4, (1) 3C x 8, (1) 5B 8.0, in good condition

633

Pallet of Pulleys
(1) 6c 270 with hub, (1) 4B25OR with hub, (1) 5C 16 with hub, (1) 6C10, in good condition

634

#80 Roller Chain
Approx. 1200', 2626 lbs., this chain is lightly used, like new condition

635

Pallet Jack
(1) 27" x 48", 5500 lb. capacity, (1) 21" x 45", 2200 KG capacity, in good condition

636

Pallet Jack
(2) 21" x 45", 2000 KG, in good condition

637

Lumber Racks
(2) 3' x 5' x 4', (1) 3' x 80" x 44", in good condition

638

Cornell Mud Saw
6' at pivot, electric drive, no blade, in good condition

639

Moulder Infeed
6" x 6" capacity, electric drive, like new condition

640

Electro Hydraulic Power Unit
SN: IN45224, GPM260, pump: 312, 50 hp, 3 ph., 480 volt, part of lid missing, 60 gallon reservoir, in good condition

641

Hydro System Power Pak
Model: 10-V10.1P1P.1C20-1-200, SN: 3741 501127, 10 gallon capacity, 5 hp 3 ph., includes disconnect, 4 parker air valves, 4 vicker hydraulic valves, needs tune up

642

2010 Hydraulic Pump
SN: 2520V21A141CC22L, includes 5CX14 pulley, 3 hydraulic valves

643

Lift Table
54" D, 3000 lbs. capacity, pneumatic, in good condition

644

Pallet Jack
(1) 27" x 48', (1) 21" x 45", 2000 lbs. capacity

645

Pallet Jack
(2) 21" x 45, 2000 capacity, in good condition

646

647

Rigid Pipe Threader
SN: 2391, 2" capacity, number 208 Tri stand, no dies, in good condition

648

Misc. Belting
Used belting, various widths and lengths

649

Misc. Belting
Used belting, various widths and lengths

650

Misc. Pulleys
(1) 4C 16.0, (2) 2B x 6, (1) 2B x 4.5, (1) 2B x 7.5, (1) 2B x 9.75, (1) 2B x 8, (1) 1B x 11.5, (1) 25V x 1250, (1) 3C75, (1) 4C x 7, (2) 2B x 5.5

651

New Carolina Blower Fan
21" x 52", 12 paddles, 2 11/16" Bore

652

New Carolina Blower Fan
20" x 46", 6 paddles, 3" Bore

653

Carolina Blower Fan
21" x 52", 12 paddles, 2 11/16" Bore, in good condition

654

Carolina Blower Fan
21" x 52", 6 paddles, 2 11/16" Bore, in good condition

655

Truck Tool Box
Aluminum, fits any full size bed

656

Waste Chain
Detachable chain, includes drive and idler end, in good condition

657

Barn Sweep Chain
14" paddles, in good condition

658

Waste Conveyor Chain
16" paddles, HD, approx. 35', in good condition

659

Waste Conveyor Chain
16" paddles, HD, approx. 20', in good condition

660

Misc. Chain
H-130 roof top, drag chain with new paddles, in good condition

661

Mellot Hydraulic Pak
Single vane, 12" x 20" x 18" reservoir, 25 hp 3 ph., in good condition

662

Hydraulic Pak
Single vane, 40 hp 3 ph., 30" x 36" x 18" reservoir, in good condition

663

Hydraulic Pak
Model: PV4290R-32009, SN: 26958, Delavan pump, 25 hp 3 ph., heat exchanger, 27" x 45" x 15" reservoir, no motor on heat exchanger fan, in good condition

664

Hydraulic Pak
Single vane, 110 solenoid, 5 hp 3 ph., 10 gallon reservoir, needs maintenance

665

Radiator
43" x 43", 36" fan, 7.5 hp 3 ph. 1155 rpm, dual direction fan, in good condition

666

Continental Hydraulic Power Pak
Model: P81-81-898, 35 gallon, vane type, 7.5 hp 3 ph., in good condition

667

KL Hydraulic Reservoir
24" x 36" x 14" capacity, 10 hp 3 ph., no pump, in good condition

668

Hydraulic Unit
11" x 11" x 30" vane type, hp unknown, includes hoses and (2) 10" stroke rams, in good condition

669

Hydraulic Unit
Vane type, 10 gallon capacity, 5 hp 3 ph., in good condition

670

Rexroth Reservoir
32" x 52" x 15", in good condition

671

Hydraulic Reservoir
24" x 36" x 12" capacity, in good condition

672

Hydraulic Reservoir
16" x 24" x 16", vane type, 5 hp 3 ph., in good condition

673

Sullair Compressor
Model: 25-100 L, SN: 18697-KGD, max psi 110 screw type, 100 hp 3 ph. includes disconnect, in good condition

674

Hydraulic Unit
22" x 43" x 18", vane type, 15 hp 3 ph., in good condition

675

Hydraulic Unit
14" x 25" x 16", vane type, no motor, good condition

676

Racine Reservoir
80 gallon, heat exchanger, in good condition

677

Hydraulic Unit
12" x 29" x 16", vane type, hp unknown, heat exchanger

678

Hydraulic Pump
Vane type, 15 hp 3 ph., in good condition

679

Zabel Equipment Hydro Pak
Model: ZE30100, SN: 1506, vane type, 10 hp 3 ph., 3 variable speed controls, in good condition

680

Hydraulic Unit
10 gallon, vane type, 2 hp 3 ph., includes 3 Vickers valves, in good condition

681

Mellot Hydraulic Pak
10 gallon, vane type, 10 hp 3 ph., needs maintenance

682

Punch Press
Pneumatic clutch, 3 hp 1 ph. 220 volt, disconnect, no dies, in good condition

683

MorBark Chip-Pac
48", RH, 3 knife, no drive on chipper, in good condition

684

Precision Chipper
58", 3 knife, RH, top discharge, needs rebuilt

685

Precision Chipper
SN: C-788, 48", RH, 3 knife, top discharge, needs rebuilt

686

Precision Chipper
60", RH, 3 knife, top discharge, needs rebuilt

687

Precision Chipper
SN: C2115, 48", RH, 6 knife, top discharge, includes 2 boxes of new knives, in good condition

688

Fulghum Chipper
66", RH, 8 knife, bottom discharge, in good condition

689

Sumner Chipper/Mulcher
Model: 35, SN: 1181, 15 1/2" x 16 1/2" intake, includes 75 hp 3 ph., in good condition

690

Scan Hugger Waste Grinder
SN: 926412, type: HT 75-60-4, 915 rpm

691

Shutte Hammer Mill
Model: 1320, SN: 108, 3600 rpm, includes long sweep elbow, no drive, in good condition

692

1997 ZENO Grinder
SN: 97 A-4535, Type: ZTLL1600X, 1800, 1 extra screen, in good condition

693

Chipmaster Chipper
Model: 60R, 68", RH, 6 knife, top discharge, in good condition

694

Chipmaster Chipper
Model: 75L, SN: 69 10 03, 86", LH, 8 knife, in good condition

695

Jeffrey Hammermill
SN: 11899, size: 34WB, 12" x 36" intake, 100 hp 3 ph., in good condition

696

Soderhamn Chipper
68", RH, 6 knife, top discharge, in good condition

698

Fulghum Shaker Screen
SN: F1-R-667, 7x7, includes cyclone, 3 hp 3 ph., in good condition

699

Fulghum Shaker Screen
SN: F1-R-467, 6x6, 5 hp 3 ph., in good condition

700

Roto Flow Chip Screen
6" x 6", 2 hp 3 ph., in good condition

701

Soderhamn Chip Screen
Model: CS-25, SN: 622, 5x5, cyclone, 2 hp 3 ph., needs maintenance

702

Soderhamn Chip Screen
Model: CS-27, SN: 268, 7x7, no drive, in good condition

710

Irvington Moore Trimmer
Drop saw trimmer, 18' capacity, 40 hp 3 ph., this unit could be line shaft ready, extra blades, chain included, in good condition

711

Morris Drop-Saw Trimmer
18' capacity, 9 individual electric motors, 8" thick capacity, includes drive shaft and chain, no idler, working condition

715

Double End Timmer
9" x 52" capacity, (2) 15 hp 3 ph., has drive but no idlers, in good condition

716

Double End Timmer
9" x 22' capacity, (2) 7.5 hp 3 ph., includes all controls, hydraulic pak, everything intact, needs maintenance

717

Double End Timmer
Model: K-25, Newman 9" x 20' capacity, electric drive, no controls, needs to go through shop

718

Double End Timmer
8" x 16' capacity, electric drive with controls, includes 24" x 20' belt conveyor, needs maintenance

719

Moore Tilt Hoist
SN: 390-104, 3 arms, 6' x 11" capacity, 2 HD Tulsa winch, electric drive, working condition

720

Tilt Hoist
3 arm, 8' x 9' capacity, HD Tulsa winch, electric drive, in good condition

721

Tilt Hoist
4 arm, 4' x 12' capacity, Falk gear drive, electric drive, in good condition

722

Tilt Hoist
3 arm, 6' x 12', HD Tulsa winch, electric drive, in good condition

723

Tilt Hoist
3 arm, 8' x 12' capacity HD Tulsa winch, electric drive, fully dismanted, in good condition

724

Merchandiser Saw
60" blade capacity. Solid piece!

725

Jacobson Blower
Model: 3011-T, SN: 24383, 10" x 20", 25 hp 3 ph

726

Husk*
56" bottom blade, 40" top blade, off bearing belt, type: K3VL40/B hydraulic pump, line shaft ready, in good condition

727

McDonough Band Wheels*
6' D x 10" W, 1" band, in good condition

728

Husk*
7' D x 13" W, top wheel: 1 1/4" band, bottom wheel: 1 1/2" band, includes shaft and mounting brackets, pulley, in good condition.

729

Heardrig Bands*
(6) 436", (6) 392"

730

Dodge Reduction Gear*
SN: BT184002168, ratio: 141: 28:1, input speed: 1750 rpm, output torque: 123, 914 in-lb max, input power 24 hp max, output shaft 4" x 8.27", A1 mounting. New in crate!

731

Upcut Chopsaw
Pneumatic foot petal, no blade, electric drive, in good condition

732

Cyclone
48" x 60", 9" inlet, in good condition

733

Steel Band Chopper
1 hp 1 ph, get rid of your steel banding quickly, in good condition

734

Steel Band Chopper
1 hp 1 ph, get rid of your steel banding quickly, good condition

734A

Hershberger Slab Saw
Mechanical, 36" insert tooth blade, 18' infeed, line shaft ready, new in Feb. 2022, in good condition

735

Brewco Resaw
Model: BBBH, SN: BB2H722, 4H band, 8" x 16" capacity, 3/4" band wheels, hydraulic drive on feed and return belt, bands are line shaft, in good condition

736

Fast Line Resaw
Model: FLR1204, SN: 12102-93, 121202-96, 2 head, horizontal band, 20" x 14' belt conveyor, no band wheels, 1 head has wheel spindles, parts machine

737

MW Resaw
Single head horizontal 7" x 12' belt conveyor, 20' band wheels, no drive. Working condition

738

739

Baghouse
40' x 40' x 9', in good condition

740

1993 Hydraulic Tank
250 gallon, includes vane type pump, 2 hp 3 ph electric motor. Air tank converted to hydraulic tank, in good condition

741

1975 Ingersoll Rand Compressor
Model: 25305, SN: 53087, type 30, 2 stage, 80 gallon, 5 hp 3 ph, horizontal, in good condition

742

1999 Air Tank
150 gallon vertical, was used in last 6 months, in good condition

743

1987 Air Tank
200 gallon vertical

744

1954 Ingersoll Rand Compressor
Model: 15T, SN: 30T 306612, type 30, 2 stage pump, horizontal, 15 hp 3 ph, has cooling fins, in good condition

745

1986 AJAX Compressor
Vertical 60 gallon, twin cylinder pump, 5 hp 1 ph electric, needs new air intake filter hosing otherwise in good condition

746

1976 Air Tank
135 gallon vertical, in good condition

747

1999 Ingersoll Rand Compressor
Model: 3000, SN: 00010314, 120 gallon horizontal, 2 stage compressor, cool radiator, 30 hp 3 ph electric, in good condition

748

Blower Fan
18" x 58", 18" x 19" outlet, no inlet plate, motor mount, no drive, in good condition

749

2009 Koger Air Blower Fan
Model: CCW-360, SN: KAF-7009, size: 21, 17" x 54", 16" RD inlet, 17 1/2" x 20" SQ outlet, no drive, in good condition

750

GP Fan Dust Blower
SN: J-3253, size: 276, 29 1/2" RD inlet, 20 1/2" x 30' outlet, 2 hp 3 ph electric, in good condition

751

Air Lock
14" x 27", HD, stainless steel paddles and inner housing, 7.5 hp 3 ph with reduction gear, in good condition

752

Air Lock
10" x 18" HD, stainless steel paddles and inner housing, motor mount, no drive, in good condition

753

Air Lock
12" RD inlet and outlet, 3 hp 3 ph with reduction gear, in good condition

754

Twin City Fan
SN: 81-32667-2-1, size: 28, type: JBA, 16" RD inlet, 16" RD outlet, 125 hp 3 ph electric, in good condition

755

New Klima Blower Fan
14' x 36" D, N motor 1800 rpm, 240 volt, 3 ph

755A

New Klima Blower Fan
14' x 36" D, N motor 1800 rpm, 240 volt, 3 ph

755B

New Klima Blower Fan
14' x 36" D, N motor 1800 rpm, 240 volt, 3 ph

755C

New Klima Blower Fan
14' x 36" D, N motor 1800 rpm, 240 volt, 3 ph

755E

New Klima Blower Fan
14' x 36" D, N motor 1800 rpm, 240 volt, 3 ph

755F

New Klima Blower Fan
14' x 36" D, N motor 1800 rpm, 240 volt, 3 ph

756

Air Lock
12" RD inlet and outlet, 2 hp 3 ph with reduction gear, some wear

757

Air Lock
12" RD inlet and outlet, motor mount, no drive, includes 24" to 12" reducer, in good condition

758

Dust Blower
6" x 20", 7" RD inlet and outlet, electric drive, hp unknown, in good condition

759

Buffalo Blower
SN: 84307562, 60-3 CB, HD pressure blower, 12" RD inlet and 7" x 10" outlet, 40 hp 3 ph, in good condition

760

Dust Blower
4" x 16", 5" inlet, 2 hp 1 ph electric, in good condition

760A

Dust Blower
22", 15" outlet, 14" inlet, new shaft and bearings, belt drive, good condition

760B

Dust Pipe
(5) 10" x 15', 75' total, HD, in good condition

761

Air Tank
500 gallon horizontal, in good condition

762

Air Tank
80 gallon vertical, in good condition

763

1945 Air Compressor
135 gallon horizontal, 1 stage pump, 5 hp 3 ph electric, in good condition

764

Donaldson Dust Bin
36" x 40" x 96", 5 hp 3 ph blower, 8 in.sq. outlet, some wear

765

Fulghum Chip Blower
16" x 44", 40 hp 3 ph electric, good condition

766

Twistair Compressor
Model: TA-030BB141TH, SN: M39908, max pressure: 125, 460 volt, 150 gallon horizontal, 30 hp 3 ph, includes starter

767

Phelps Chip Blower
Model: MH Chip, SN: 94417, 1800 rpm, 15" x 40", in good condition

768

Phelps Chip Blower
15" x 25", motor mount, in good condition

769

Phelps Chip Blower
15" x 25", motor mount, in good condition

770

Morbark Chip Blower
16" x 42", 18" x 14' discharge pipe, mounting plate, no drive, in good condition

771

Chip Blower
15" x 26", no drive, in good condition

772

Morbark Chip Blower
10" x 28", 12" x 8' discharge pipe, mount plate, 10 hp 3 ph electric, in good condition

773

Chop Saw
34" blade capacity, 26" x 90' belt conveyor, line shaft ready, no blade, in good condition

774

PH Double End Trim Saw
30" blades, 8' cut capacity, 11' log trough, hydraulic reservoir 5 gallon, no drive, in good condition

775

Roll Case
(2) 5' x 10', electric drive, in good condition

776

Roll Case
6' x 9', 3 strand, pop-up transfer, hydraulic drive, no drive on rolls, in good condition

777

Morbark Tank
20" x 29" x 48", was set up with Morbark chip pac, (1) single valve control, (1) 2 valve control, like new condition

778

779

Schurman Gang Saw
Model: 10.SBA48, SN: 3014, 11" x 48" capacity, 23 blades installed, power infeed and oufeed, no drive, line shaft ready, outfeed has minor fire damage

780

Roll Case
65" x 20" roll case, 6 strand pop up transfer, idler end, no drive on transfer, hydraulic drive on roll case, was used with Schurman Gang saw (lot 779)

781

Cook Gang Edger
6" x 42" capacity, 40" x 96' outfeed, line shaft ready, extra blades and spacers, no blade guides, 4 fixed and 1 moveable, in good condition

782

Euford Edger
6" x 36" capacity, electric drive, two independent sliding arbors, lasers, includes 10' infeed and 20' tailing belt, 9 extra blades, 18" diameter, in good condition

783

785

Gang Saw
6" x 40" capacity, 5 fixed blades, 36" x 44" infeed, line shaft ready, in good condition

786

Corley Gang Edger
SN: 66-HP-004, 6" x 20" capacity, 54" x 96" infeed, 54" x 34" outfeed, electric drive on infeed, no drive on gang, needs rebuilt

787

Brewer Gang Saw
6" x 32" capacity, (1) 75 hp 3 ph, 4 fixed blades, with sizer ready, 30 hp 3 ph, in good condition

788

Shurman Gang Edger
6" x 48" capacity, 4 fixed and 1 moveable blade, 4' x 7' outfeed, 4' x 8' infeed, line shaft ready, in good condition

789

Ukiah Edger
Model: 10BAS, SN: 8242, 10" x 27" capacity, 5 fixed, 2 moveable, 150 hp 3 ph, in good condition

790

Cornell Gang Edger
Model: 660ED, SN: 252-1-5-89, 8" x 27" capacity, 5 fixed, 2 moveable, 150 hp 3 ph, working condition

791

Brewco Gang Sizer
SN: HNEH0002, 4" x 12" capacity, linear positioning gang, linear positioning sizer, hydraulic drive on infeed, electric drive on gang, in good condition

792

Debarker
Rosser head, flat track electric drive on head, includes barn sweep waste conveyor and controls, needs rebuilt

793

Fulghum Debarker
Model: 618, SN: F1-00-440, Rosser head, electric drive on head, 14' log capacity, controls, another Fulghum debarker for parts, needs rebuilt

795

Debarker
SN: F161332, Rosser head, electric drive on head, slant track, 16' capacity, cab and controls, needs rebuilt

796

Hosmer Debarker
Model: V-206-H, SN: V.206.135, Rosser head, electric drive on head, 16' capacity, complete unit, needs rebuilt

797

Morbark Debarker
Model: 636, SN: 285, post peeler type, electric drive, no controls, needs rebuilt

798

Debarker
Rosser head, electric drive on head, flat track, pentagraph, no cab or controls, needs rebuilt

799

HMC Debarker
Model: V-206, SN: 9422, Rosser head, electric drive on head, flat track, cab and controls, complete unit, needs rebuilt

800

Precision Debarker
Electric drive on head, flat track, waste conveyor, cab and control, complete unit, needs rebuilt

801

Mellot Debarker*
Model: 200, SN: 872001378, type: 8, Rosserhead, electric drive on head, needs rebuilt

803

HMC Debarker
Model: V206, SN: 196297, no head, slant track, frame and bulls wheels only

804

805

1995 Mellot Debarker
Model: 200, SN: 94200311, Type: 10 Rosser head, all hydraulic, pantograph, no cab or controls, needs rebuilt

806

2005 West Plains Roll Case
Model: WPRS-RC, SN: 1433, 15" x 14' roll case, 4 1/2" rolls, electric drive, was used with a resaw system, almost new condition

807

Roll Case
53" x 16', 8 1/2" rolls, 4 pop up transfer, in good condition

808

Belt Conveyor
16" x 15', electric drive with reduction gear, in good condition

809

Belt Conveyor
14" x 10', waste belt, incline, electric drive, in good condition

810

Waste Conveyor
10" paddles, 48' long, WS78 chain, with incline, electric drive, in good condition

811

Waste Conveyor
11" ladder back chain

812

Log Trough
6" ladder back chain, 40' long, 5' tall, no drive, in good condition

814

Waste Conveyor
13 1/2" paddles, 38' long, includes 11' legs, electric drive with right angle gear reducer, 31-8

815

Belt Conveyor
38" x 17', no drive, needs new belt, in good condition

816

Meadows Belt Conveyor
32" x 60" belt conveyor, 32" x 96" panning, used as outfeed on edger, no drive, has some wear but in good condition

817

HMC Drop Belt
Model: BC96, SN: 3185663, 30" x 13', no drive

818

Concave Belt Conveyor
33" x 36', electric drive

819

Belt Conveyor
14" x 10', electric drive, in good condition

820

Belt Conveyor
8" x 17', no drive, in good condition

821

JB Hammermill
Size: 20, Stock: 1708, Pto belt drive, includes 7 screens, cyclone, bagger chute, bags, and belting. Always stored inside, good condition

822

Blower Fan
12" x 36", 14" inlet, 12" outlet, line shaft ready, in good condition

824

Mellot Log Turner
36", chain type hydraulic drive, in good condition

825

Renco Log Turner
36", chain type hydraulic drive, in good condition

826

Mellot Log Turner
36", chain type hydraulic drive, in good condition

827

Belt Conveyor
6" x 28', electric drive, in good condition

828

Belt Conveyor
8" x 14' belt with 6" x 11' roll case with tilt, set up as on out feed for edger, in good condition

829

Belt Conveyor
4" x 12' edger outfeed, hydraulic drive, in good condition

829A

Vibrating Conveyor
18" pan, 6" sides, 65' long, bar screen, electric drive, in good condition

830

Webster Vibrating Conveyor
Model: FSM, SN: 842-1863-5, size: 18-24, 40' long with chipper infeed, hydraulic drive, in rough condition

829B

Belt Conveyor
13" x 29' 3" sides with trash hopper, no drive, in good condition

831

Belt Conveyor
14' x 27', electric drive, needs new belt, in good condition

832

Dead Rolls
(1) 44" x 64", (1) 44" x 120", (1) 46" x 76", in good condition

834

Edger Infeed
8" x 24" rolls, 10' long, linear positioning infeed, hydraulic drive, heavy duty, in good condition

835

Roll Case
8 1/2" x 42" rolls, 14' long, frame is 22' x 8', includes 4 strand board kicker, hydraulic drive, in good condition

836

Roll Case
4 1/2" x 18", 16' long rolls, are on an angle, hydraulic drive, in good condition

837

Tilt Dead Rolls
2" x 18 1/2" rolls, 20' long, in good condition

838

Dead Rolls
(1) 2" x 26" rolls, 6' long, (1) 2 1/2" x 6", 11' long, in good condition

839

Roll Case
7" x 48" rolls, 13' long with reduction gear, no drive, HD, in good condition

840

Resaw Return
6 1/2" x 20" rolls, 2 strand pop-up transfer, hydraulic drive, no drive on rollers, in good condition

841

Roll Case
20" x 5', electric drive, in good condition

842

Roll Case
4" x 10", 8' long, no drive, in good condition

843

Roll Case
4 1/2" x 12" rolls, 20' long, hydraulic drive, includes 3 arm board kicker, pneumatic, in good condition

844

Unscrambler
5 strand, 8' x 11'6", WS78 chain, no drive, in good condition

845

Unscrambler
5 strand, 8' x 13', 7'6" tall, 81X chain, electric drive, in good condition

846

Roll Case
6 1/2" x 36" rolls, 16' long, rolls are on slant, includes drive for 6 strand transfer, no idler, electric drive, in good condition

847

Unscrambler
7 strand, 10' x 16', 9'3" tall with 6" x 24" rolls, rolls at a slant, electric drive, in good condition

848

Dead Rolls
6 1/2" x 64 x 21' long, in good condition

851

Catwalk
33" x 37', in good condition

852

Aluminum Grating
(10) 1 3/4" x 21" x 34 3/4", 1 3/4 x 19 x 41, 1 3/4" x 25" x 35 3/4, 1 3/4 x 14 1/2 x 21", in good condition

853

CTR Delimber
42" buck saw, in good condition

854

Spiral Staircase
80" D x 11' T, in good condition

855

3 Strand Log Deck
10' x 17' log deck with Tulsa winch drive, stop'n'load

856

Log Trough
30' long, electric drive, heavy duty, 5" wide chain for narrow logs, in very good condition

857

New Stock Equipment 6 Gear Box
1887 rpm, 86. 43:1 ratio

858

Transfer Deck
10' x 19'6", 3 strand, electric drive

859

4 Strand Green Chain
23' long, C-188 chain, electric drive, no drive shaft

860

Transfer Deck 6 Stand
14' x 26' long, in good condition

861

2 Strand Transfer Deck
3' wide x 24' long, electric drive, in good condition

862

4 Strand Log Deck
9'6" wide x 24' long, rooftop chain, in good condition

863

2 Strand Transfer Deck
SN: 9998, 4'6" wide x 21', electric drive with tulsa winch, in good condition

864

6 Strand Transfer
12 1/2' wide x 7' long, electric drive, 81X chain, air operated, cant stops, in good condition

865

4 Strand Transfer Deck
H78 chain, 11'6" wide x 40' long, gear box drive, in good conition

866

5 Strand Log Deck
13'6" wide x 50' long, electric drive, heavy duty, in good condition

867

4 Strand Transfer Deck
13' wide x 8' long, electric drive, in good condition

868

5 Strand Log Deck
SN: 9848, 17' wide x 38' long, stop'n'load, electric gear box drive, in good condition

869

4 Strand Transfer Deck
11' wide x 27' long, hydraulic drive, H-130 chain, cant stops, in good condition

870

6 Strand Transfer Deck
Model: Hosmer, 14' x 10' long, electric drive, manual stops, in good condition

871

4 Strand Transfer Deck
12' wide x 23', with drive

872

6 Strand Transfer Deck
13'5" wide x 10' long, electric drive

873

4 Strand Log Deck
Chain included, no drive, has drive shaft, 13' wide x 20' long

874

3 Strand Green Chain
10'8" wide x 30', gear box drive, C-188 chain, in good condition

875

4 Strand Transfer Deck
SN: 9040, 10'6" wide x 38' long, electric drive, H78 chain, in good condition

876

4 Strand Grading Deck
SN: 9981, 13' wide x 20' long, C55 chain, electric drive, in good condition

877

4 Strand Transfer Deck
SN: 9753, 40' long, electric S-drive, 81X chain, good chain

878

5 Strand Green Chain
14' wide x 82' long, electric drive, side-roller tape, chain on outside strands, in good condition

879

4 Strand Transfer Deck
SN: 9973, 9'6" wide x 24' long, rooftop chain, electric tulsa winch drive, in good condition

880

3 Strand Transfer Deck
8' wide x 70' long, electric drive

881

2 Strand Transfer Deck
5'6" wide x 10' 10" long, has cant stop, hydraulic stop

882

Green Chain
10' x 17' 4 strand, (1) 8LX chain, 3 rooftop chain, in good condition

883

2 Strand Transfer Deck
29" x 25', 13' has its own drive, 12' has its own drive, hydraulic drive, was used to transfer from chopsaw to gangsaw, in good condition

884

Fuel Tank
3' x 5', no leaks, 300 gallon, in good condition

885

Saw Dust Bin*
10' x 10' x 16', 24" rack/pinion slide gate, includes stirrator, electric drive, in good condition

886

Doyle Log Scale*
48" log scaler, in good condition

887

Doyle Log Scale*
48" log scaler, in good condition

888

Doyle Log Scale*
36" log scaler, in good condition

889

Log Decimal Scale*
36" log scaler, in good condition

889A

Doyle Scribner*
36" log scaler, in good condition

890

Lumber Grader*
36", 3 line, in good condition

891

Lumber Grader*
36", 3 line, in good condition

892

Lumber Grader*
24", 4 line, in good condition

893

Hydraulic Tank*
40 gallon, was used on feed truck, in good condition

894

PTO Shaft*
8 series, 8" x 46" 1 3/8" 21 Spl QD BE, all purpose driveline, includes 2 jack shafts, 2 3/16" shafts, B6 15" pulley, B6 9" pulley, in good condition

895

Lincoln Electric Motor*
50 hp, 1765 rpm, frame: 326T, includes C4 9" pulley, in good condition

896

Lincoln Electric Motor*
75 hp, frame: 405T, with B4 12" pulley, includes motor mount, in good condition

897

Reduction Gear*
1 7/8" output shaft at 14 rpm, includes c-phase mount 2 hp electric motor 3 ph, in good condition

898

Electric Motor*
5.5 hp, 1750 rpm, frame: 213T, B2 3 1/2" pulley, in good condition

899

Lincoln Electric Motor*
15 hp, 1750 rpm, frame: 254T, B2 10" pulley, in good condition

900

Pallet of Disconnects*
3 ph disconnects, (2) 30 amp, (1) 60 amp, (1) 100 amp

903

Hydraulic Reservoir*
21" x 59" x 29", in good condition

904

Hydraulic Pump*
(1) vane type, (1) pressure compressor with 60 hp 3 ph electric motor on frame, in good condition

905

Clarage Dust Blower*
Number 25, 20" x 58", 24" Rnd inlet, 21" x 22" outlet, belt drive, some wear

905A

Air Intake Valve*
20 1/2" x 22 inlet, 24" rd outlet, 50" tall, in good condition

905B

Cyclone*
8' x 31', 24" inlet, 26" x 44" air return, 16" outlet, access door, in good condition

905C

Blower Pipe*
24", (1) 90 elbow, (2) 45 degree elbows, (1) 10', (1) 51", (1) 34", in good condition

906

Heat Exchanger*
Model: AOVHM-40, SN: C132526, 10" x 41 1/2" x 38", 300 psi, hydraulic drive on fan, includes stand, in good condition

907

Belt Conveyor*
36" x 42', 36" tall, electric drive, in good condition

908

Cyclone*
42" x 9', 10" inlet, 16" outlet, stand included, in good condition

909

Rotex Shaker Screen*
5' x 14', 17' overall, hp unknown electric drive, used to separate chips from sawdust, in good condition

910

Cyclone*
6' x 12'8", 10" inlet, 18" outlet, in good condition

911

Sawdust Blower*
9" x 28", 8" inlet, 8" outlet, motor mount, no drive, some wear

912

Allis Chalmers Silage Blower
Electric drive, includes 48' of 8" pipe, in good condition

913

Conveyor*
5' x 18', 4' tall capacity, 9'7" overall height, no drive, some wear but in good condition

914

Clipper Belt Lacer
SN: 123644, No. 3"-6"

915

Clipper Belt Lacer
SN: 76205, No. 3"-6"

916

Hanchett Swage and Armstrong Setter
Swage, No. 55 setter, 6900 B, in good condition

917

Hanchett Swage and Setter
SN: 5058, setter No. 8 band shaper, in good condition

918

Manual Saw Filer
In good condition

919

Jockey Grinder
Electric drive, in good condition

920

Jockey Grinder
Electric drive, in good condition

921

Makita Grinder
Electric drive, in good condition

922

Steel Strapping Tools
In good condition

923

Steel Strapping Tools
In good condition

924

Steel Strapping Tools
In good condition

925

Steel Strapping Tools
In good condition

926

Steel Strapping Tools
In good condition

927

Steel Strapping Tools
No tensioner, in good condition

928

Pallet Nailer
(2) Bostich pneumatic nailers, in good condition

929

Pallet Nailer
(1) max good condition, (1) Bostitch, bad seal

930

Simonds Teeth Shanks
(50) F-8, (50) B-8, in good condition

931

New Simonds Saw Bits
(300) 9/32, carbide dipped

932

New Treated Yellow Pine Posts
(100) 3 1/2" x 7'

933

New Treated Yellow Pine Posts
(100) 3 1/2" x 7'

934

New Treated Yellow Pine Posts
(100) 3 1/2" x 7'

935

New Treated Yellow Pine Posts
(100) 3 1/2" x 7'

936

New Treated Yellow Pine Posts
(100) 3 1/2" x 7'

937

New Treated Yellow Pine Posts
(100) 3 1/2" x 7'

938

New Treated Yellow Pine Posts
(100) 3 1/2" x 7'

939

New Treated Yellow Pine Posts
(100) 3 1/2" x 7'

940

New Treated Yellow Pine Posts
(100) 3 1/2" x 7'

941

New Treated Yellow Pine Posts
7 1/2" x 8'

942

New Treated Yellow Pine Posts
7 1/2" x 8'

943

New Treated Yellow Pine Posts
7 1/2" x 8'

944

New Treated Yellow Pine Posts
7 1/2" x 8'

945

New Treated Yellow Pine Posts
7 1/2" x 8'

946

New Treated Yellow Pine Posts
7 1/2" x 8'

947

New Treated Yellow Pine Posts
7 1/2" x 8'

948

New Treated Yellow Pine Posts
7 1/2" x 8'

949

New Treated Yellow Pine Posts
7 1/2" x 8'

949A

New Farm Gate
50” x 16’ , 1 ¾” round tube 14GA, includes hangers

949B

New Farm Gate
50” x 16’ , 1 ¾” round tube 14GA, includes hangers

950

Cant Stacker/Sorter
7' x 20'6", 10'4" tall, no drive, like new condition

951

Aluminum Waste Conveyor
5" x 16', single chain, rubber paddles, no drive, in good condition

952

Roll Case
11" x 36" rolls, 5 rolls, 14'3" long, hp, no drive, in good condition

953

Webster Vibrating Conveyor
17" pan, 6" sides, 21' long, burr screen, chipper infeed, no drive, in good condition

954

Jay Bee Hammer Mill
13 1/2 x 19 1/2 intake

955

Roberts Mill Hammermill
SN: 761, 3600 rpm, top feed style, 60 hp 3 ph electric, just came out of production, in good condition

956

Aerovent Blower
SN: 8705494-001, 17" x 48", top discharge, 20 hp electric drive, 20" intake, 17" x 18" outlet, in good condition

957

Lumber Cart*
30" x 60" x 45", rubber wheels, in good condition

958

Lumber Cart*
27" x 46" x 48", swivel wheels on one end, in good condition

959

Lumber Cart*
42" x 84" x 48", stop on one end, in good condition

960

Lumber Cart*
42" x 84" x 48", stop on one end, in good condition

961

Lumber Cart*
42" x 96" x 48", stop on one end, in good condition

962

Lumber Cart*
42" x 96" x 48", stop on one end, in good condition

962A

Lumber Cart*
3ft x 6ft, railroad cart style

962B

Lumber Cart*
3ft x 6ft, railroad cart style

963

MMT Notcher*
Model: 150A, SN: 247, single head, 15 hp 3 ph, electric drive, in good condition

964

Belt Conveyor*
10" x 35', electric drive, in good condition

965

Belt Conveyor*
16" x 24' cleated belt, hydraulic drive, dust cover. Has some wear but in good condition

966

Baker Resaw Parts*
Belt, arbor, in good condition

967

Jones Saw Grinder*
Electric drive, includes holder for electric grinder, band saw tooth setter, in good condition

968

Banding Cart*
Deluxe, on wheels, in good condition

969

Dust Blower*
11" x 40", 12" inlet, 10" outlet, 15 hp 3 ph electric, in good condition

970

Cooks Band Roller*
In very good condition

971

Cooks Cat Claw Sharpener*
Electric drive, in very good condition

972

Manual Strapping Tool*
MIP 499, in good condition

973

Manual Strapping Tool*
MIP 499, in good condition

974

Manual Strapping Tool*
Mul-20, used for steel strapping, in good condition

975

Manual Strapping Tool*
Mul-20, used for steel strapping, in good condition

976

Manual Strapping Tool*
Mul-20, used for steel strapping, in good condition

977

Manual Strapping Tool*
Mul-20, used for steel strapping, in good condition

978

Bosch Strapping Tool*
Battery powered, includes 2 batterys and charger, plastic only, in good condition

979

Bosch Strapping Tool*
Battery powered, includes 2 batters and charger, plastic only, in good condition

980

Steel Banding Clamps*
1/2" clamps, 3/4 box full, includes 1 manual clamp clincher, in good condition

981

Plastic Strapping*
1/2" x 3/4 full roll, in good condition

982

Cant Edger*
4" x 20" capacity, 4 fixed blades, electric drive, hydraulic drive on infeed and outfeed, self contained hydraulic pak, shop built, box of extra blades, in very good condition

983

Belt Conveyor*
26" x 42', no drive, in good condition

984

Post Pointer*
2" D capacity, electric drive, includes hydraulic pak and disconnect, in good condition

985

Banding Cart*
Includes some steel banding, in good condition

986

Banding Cart*
Almost new and in good condition

987

Steel Banding*
5/8" x full roll, almost new condition

988

Fulghum Chip Screen*
5x5, electric drive, includes cyclone, last in production 2021, in good condition

989

Morbark Chipper*
Model: 348, SN: W359, 3 knife, RH, top discharge, no drive, last in production 2021, in good condition

990

991

Belt*
30" x 142', 1/8" thick, in good condition

992

Roll Case Transfer*
4" x 26" rolls, 11' long, 5 strand pop up transfer, #40 chain, all mechanical, line shaft ready, includes 24" x 10' belt conveyor with hold down, no drive, in new condition

993

Steel Platform*
5'6" x 11'2", includes steps, 42' railing, in good condition

994

Froedge Deduster*
4" x 7" capacity, line shaft ready, in good condition

995

Shipping Container*
8' x 8' x 20, used and in good condition

996

Shipping Container*
8' x 8' x 20, used, new paint inside, in good condition

Showcase Equipment Auction & ExpoPrevious Page Listing ID#: 1535393

Free Email Notifications

Share This Listing

Other Sales byThis Company

Sponsored Links

Showcase Equipment Auction & Expo

Login

Sign Up

Sign Up

Login

Showcase Equipment Auction & Expo
Previous Page Listing ID#: 1535393

Other Sales by
This Company