THIS IS A COMPLETED SALE
View current listings by this company

Late Model Sawmill Equipment - Lake City, MI
Previous Page Listing ID#: 1534992

Auction Location
Lake City, MI 49651

Auction Dates and TimesSALE IS COMPLETED
Thursday Sep 7, 2023 Completed

Auction Type
Live Auction

Company Information
Bright Star Realty and Auctions, INC Contact: Loren Beachy Phone: 574-825-0704 Email: beachyauctions@gmail.com Website: brightstarauctions.com GoToAuction.com ID#: 5286 View company information and listings

Free Email Notifications

Sign up for the GoToAuction.com email notifications and we will let you know about sales in your area! You may set up alerts by area (zip and radius), keywords, and by company. It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions
Bidder Terms and Conditions There is a 13% online buyer’s premium in effect for all purchases made online. Buyer’s premium is 10% for onsite bidders. All items sell where is as is with no warranties or guarantees. Buyer is responsible to inspect all merchandise prior to placing bids. Payment terms: Cash, check, wire transfer. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice. Onsite buyers, payment is due the day of the auction. If onsite bidders wish to send a wire and still be assessed only the onsite buyer’s premium, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. All items are pick-up only. Smalls must be removed within 2 days. All items must be removed within 30 days unless otherwise noted. Loadout available day of auction, after that by appointment. Please call agent for more info. Buyer shall assume responsibility of all property when auctioneer says sold. Auction company is not responsible for any missing or stolen items. These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer. PURCHASING REQUIREMENTS All equipment is being sold “AS-IS, WHERE- IS” with NO warranties expressed or implied. All equipment must be paid for IN FULL before equipment removal. All Equipment must be removed from Biewer Sawmill Lake City LLC. by no later than 12/01/2023 Entry to the property must be scheduled Any doing any work on the property must complete the Biewer Sawmill Lake City LLC Contractor Training Program and adhere to the program 100% Purchaser’s or Purchaser representative (including all sub-contractors) Certificate of Liability Insurance MUST BE PRESENT AT TIME OF RETRIEVAL OF PURCHASED EQUIPMENT AND INCLUDE: At least 1,000,000 General Liability Each Occurrence At least 2,000,000 General Liability General Aggregate At least 500,000 Work Comp & Employers Liability Coverage All Rigging/loading will be the responsibility of the purchaser Spark watch for hot work will be the responsibility of the purchaser and must comply with Biewer Hot Work Policy Purchaser must utilize the Stored Entry Isolation & De-Energization Checklist prior to decommissioning any equipment in order to safely identify and resolve stored energy hazards All buildings and equipment are to be returned to their original condition prior to leaving the property (ie: If necessary to remove a panel of wall or roof to obtain purchased equipment, the purchaser must return the panel to its original location and fastened in its original fashion) Floors must be left clean and free from debris and fasteners must be flush with the floor, any concrete damaged during equipment retrieval must be repaired prior to leaving the property. All trash removal will be at the expense of the purchaser Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms. Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded where required. Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer: “Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction. “Absentee Bidder” means a person or entity that submits an Absentee Bid. “Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION. “Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids. “Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected. “Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder. “Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms. “Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer. "Buyer" means the Winning Bidder with respect to each Lot of Personal Property. "Buyer's Premium" is an amount with respect to each Lot of Personal Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account. “Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation. “Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer. “High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot. “High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on the Lot put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price. “High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot. "Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event. “Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer. “No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale. “Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions. “Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online. "Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered. “Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers. “Personal Property” means all tangible and moveable property, including fixtures, designated as Property. “Pick-up” means the act of picking up or removing sold Lots by respective Winning Bidders at the date(s), time(s), and location indicated for such during the Auction or as later agreed to by Seller and Buyer. “Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer). “Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms-length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction. “Property” means the Real Property and the Personal Property. “Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium. "Registered Bidder" means a person or entity that has registered to bid at the Auction. “Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction. “Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE. “Reserve Price” means the minimum price that Seller is willing to accept for specific Property. “Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer. “Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid. “Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by Seller). "Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid. “Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction. Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration. Governing Law. For Auctions in the State of Indiana and Online. Unless otherwise indicated, all Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are deemed to be entered into in the State of Indiana, all bids and payments are deemed to be received in the State of Indiana, and the contract, if any, will be deemed to be formed and entered into in the State of Indiana. Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium. Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion. Nature of the Auction. This Property is being sold at the Auction in the manner indicated on the first page of this Agreement. Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms. No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer. Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online: Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties, (i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer. No Reduction or Retraction of Online Bids. Online bids may not be reduced or retracted. Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification. Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). All prebids and maxbids placed online are considered absentee bids. Auctioneer pledges complete integrity in the treatment of absentee bids and absentee bids may be initiated and advanced in accordance with Auctioneer’s policies and procedures. Auctioneer has the right to initiate any absentee bids at 25% to 50% of their maximum amount. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder. Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion. Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder. Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction. Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot of Personal Property will be the Buyer of such Property. All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING. Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings. Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property. Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or representation by Auctioneer. Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller. Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction. Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ringman, or multiple bid assistants or ringmen, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid. Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer. All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS. Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked-Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made. Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases are due upon receipt of your invoice. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. If onsite bidders wish to send a wire, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion. Wire Transfer Payments. Buyer shall obtain verbal verification of all bank account information from Bright Star Auctions prior to initiating transfer. Except as otherwise provided by law, we shall not be liable for any loss or damage due to misplaced, unauthorized or fraudulent fund transfers. ACH/eCheck Payments. By providing account information to Bright Star Auctions, buyer gives permission for Bright Star Auctions to retain payment information on file and represents they are the authorized account holder. Upon authorization to collect payment from Buyers account and prior to transfer, Buyer is responsible to notify their financial institution of the impending transaction. Buyer agrees to notify Bright Star Auctions of any changes in account information. Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid. No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number. Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Tools, packing material, and/or assistance will not be supplied at Pickup, so Buyer must plan accordingly. Disassembly and removal shall be done in a quiet and workmanlike manner, and each Buyer, in making its bid, shall thereby indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer’s employees, agents, representatives, or independent contractors in connection with the Pickup. Any and all damages to the Pickup site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller. Each Buyer must show a copy of the invoice (digital or hard copy) and government-issued photo identification before Lots will be released. No Buyer shall bring pets or young children to the Pickup, as the movement of Lots presents an extremely high-risk environment that could result in injury or death. Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them. In addition, Buyer’s bidding privileges may be suspended at future auctions. Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer. Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession. Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled to specific performance or other equitable relief. Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages. Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property. Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium. Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller. Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site. Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim or suit relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial. Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their rights.

Listing Terms and Conditions

Bidder Terms and Conditions
There is a 13% online buyer’s premium in effect for all purchases made online. Buyer’s premium is 10% for onsite bidders. All items sell where is as is with no warranties or guarantees. Buyer is responsible to inspect all merchandise prior to placing bids. Payment terms: Cash, check, wire transfer. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice. Onsite buyers, payment is due the day of the auction. If onsite bidders wish to send a wire and still be assessed only the onsite buyer’s premium, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. All items are pick-up only. Smalls must be removed within 2 days. All items must be removed within 30 days unless otherwise noted. Loadout available day of auction, after that by appointment. Please call agent for more info. Buyer shall assume responsibility of all property when auctioneer says sold. Auction company is not responsible for any missing or stolen items.
These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer.

PURCHASING REQUIREMENTS

All equipment is being sold “AS-IS, WHERE- IS” with NO warranties expressed or implied.
All equipment must be paid for IN FULL before equipment removal.
All Equipment must be removed from Biewer Sawmill Lake City LLC. by no later than 12/01/2023
Entry to the property must be scheduled
Any doing any work on the property must complete the Biewer Sawmill Lake City LLC Contractor Training Program and adhere to the program 100%
Purchaser’s or Purchaser representative (including all sub-contractors) Certificate of Liability Insurance MUST BE PRESENT AT TIME OF RETRIEVAL OF PURCHASED EQUIPMENT AND INCLUDE:
- At least 1,000,000 General Liability Each Occurrence
- At least 2,000,000 General Liability General Aggregate
- At least 500,000 Work Comp & Employers Liability Coverage
All Rigging/loading will be the responsibility of the purchaser
Spark watch for hot work will be the responsibility of the purchaser and must comply with Biewer Hot Work Policy
Purchaser must utilize the Stored Entry Isolation & De-Energization Checklist prior to decommissioning any equipment in order to safely identify and resolve stored energy hazards
All buildings and equipment are to be returned to their original condition prior to leaving the property (ie: If necessary to remove a panel of wall or roof to obtain purchased equipment, the purchaser must return the panel to its original location and fastened in its original fashion)
Floors must be left clean and free from debris and fasteners must be flush with the floor, any concrete damaged during equipment retrieval must be repaired prior to leaving the property.
All trash removal will be at the expense of the purchaser

Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded where required.
Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer:

“Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction.
“Absentee Bidder” means a person or entity that submits an Absentee Bid.
“Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION.
“Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids.
“Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected.
“Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder.
“Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms.
“Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer.
"Buyer" means the Winning Bidder with respect to each Lot of Personal Property.
"Buyer's Premium" is an amount with respect to each Lot of Personal Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account.
“Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation.
“Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer.
“High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot.
“High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on the Lot put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price.
“High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot.
"Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event.
“Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer.
“No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale.
“Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions.
“Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online.
"Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered.
“Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers.
“Personal Property” means all tangible and moveable property, including fixtures, designated as Property.
“Pick-up” means the act of picking up or removing sold Lots by respective Winning Bidders at the date(s), time(s), and location indicated for such during the Auction or as later agreed to by Seller and Buyer.
“Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer).
“Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms-length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction.
“Property” means the Real Property and the Personal Property.
“Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium.
"Registered Bidder" means a person or entity that has registered to bid at the Auction.
“Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction.
“Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE.
“Reserve Price” means the minimum price that Seller is willing to accept for specific Property.
“Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer.
“Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid.
“Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by Seller).
"Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid.
“Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction.

Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.
Governing Law.
1. For Auctions in the State of Indiana and Online. Unless otherwise indicated, all Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are deemed to be entered into in the State of Indiana, all bids and payments are deemed to be received in the State of Indiana, and the contract, if any, will be deemed to be formed and entered into in the State of Indiana.
Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.
Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
Nature of the Auction. This Property is being sold at the Auction in the manner indicated on the first page of this Agreement.
Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
2. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
3. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
4. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
5. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
6. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
7. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
8. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.
9. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties, (i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
10. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
11. No Reduction or Retraction of Online Bids. Online bids may not be reduced or retracted.
12. Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.

1. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.
Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). All prebids and maxbids placed online are considered absentee bids. Auctioneer pledges complete integrity in the treatment of absentee bids and absentee bids may be initiated and advanced in accordance with Auctioneer’s policies and procedures. Auctioneer has the right to initiate any absentee bids at 25% to 50% of their maximum amount. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot of Personal Property will be the Buyer of such Property.
All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.

Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or representation by Auctioneer.
Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ringman, or multiple bid assistants or ringmen, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked-Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases are due upon receipt of your invoice. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. If onsite bidders wish to send a wire, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.
Wire Transfer Payments. Buyer shall obtain verbal verification of all bank account information from Bright Star Auctions prior to initiating transfer. Except as otherwise provided by law, we shall not be liable for any loss or damage due to misplaced, unauthorized or fraudulent fund transfers.
ACH/eCheck Payments. By providing account information to Bright Star Auctions, buyer gives permission for Bright Star Auctions to retain payment information on file and represents they are the authorized account holder. Upon authorization to collect payment from Buyers account and prior to transfer, Buyer is responsible to notify their financial institution of the impending transaction. Buyer agrees to notify Bright Star Auctions of any changes in account information.
Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.

No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Tools, packing material, and/or assistance will not be supplied at Pickup, so Buyer must plan accordingly. Disassembly and removal shall be done in a quiet and workmanlike manner, and each Buyer, in making its bid, shall thereby indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer’s employees, agents, representatives, or independent contractors in connection with the Pickup. Any and all damages to the Pickup site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller. Each Buyer must show a copy of the invoice (digital or hard copy) and government-issued photo identification before Lots will be released. No Buyer shall bring pets or young children to the Pickup, as the movement of Lots presents an extremely high-risk environment that could result in injury or death.
Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them. In addition, Buyer’s bidding privileges may be suspended at future auctions.
Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.
Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled to specific performance or other equitable relief.
Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim or suit relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their rights.

Listing Information
Biewer Sawmill LLC has decided to liquidate their Lake City plant, but they are by no means going out of business. In fact, they have increased production and remain stronger than ever! The equipment, from the Nicholson ring debarker to the bin sorter, is well-maintained and in excellent condition. Don't miss this rare opportunity to purchase top-quality equipment! We are accepting consignments to add to this auction. 00 Information Lot This is an absolute auction, meaning no minimums, no reserves, and no seller bidding! The highest bidder will be the new owner! Auction Agent: Eugene Hochstetler 574-242-1100 Type of Auction: Late model sawmill equipment Highlight Pieces: Nicholson ring debarker, 34 bay bin sorter, several almost new chip pacs, much more quality equipment Seller Name: Biewer Sawmill LLC 01 Preview Information Day prior or by appointment Location of auction: 1560 W Houghton Lake RD, Lake City, MI 49651 02 Loadout Information Free loadout on uninstalled Equipment day of auction until 4 pm, Friday (9/8) from 8am to 4pm, yard closed on Saturday. From there on by appointment only. All items that don't requiring rigging must be removed within 14 days. Contact Mose Troyer 330-763-3780 03 Payment Information Payment terms: 10% Onsite and 13% Online Buyer's Premium in affect for all purchases. Cash, check, wire transfer. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice. Onsite buyers, payment is due the day of the auction. If onsite bidders wish to send a wire and still be assessed only the onsite buyer’s premium, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. 93 3156G Live Heel Log Loader 1/50 Die-Cast Metal Replica Have fun buying a high-quality, die-cast toy! All proceeds including buyer's premium will go to Feed My Starving Children (FMSC) which is a Christian nonprofit dedicated to seeing every child and person around the world healthy, nourished and whole in body and spirit. Bright Star will pay for standard shipping and handling to the 48 contiguous states for buyers of this lot. https://www.youtube.com/watch?v=jYATxeDmuzM&t=8s 98 Heavy Equipment Key Set 36 Keys Shipping available for $20 99 Manual Sealless Steel Strapping Tool Model A333, works for 1/2" 5/8" or 3/4" banding, new in box. Shipping available for $30 100 2002 Ski-Doo Bombardier Model: Tundra R, VIN: 2BPS327892V002112, needs new start switch, condition unknown 101 Hydraulic Shop Press 52" x 8', heavy duty, 4 1/2" bore, 20" stroke, cage enclosure, hydraulic pak 101 Ingersoll Rand Air Compressor* Model: TS4N5, SN: 60053900, electric drive, mounted on 80 gallon tank. 120 Belt Conveyor 24' x 22', 18" belt, no support frame, electric drive 121 Belt Conveyor 22" x 30', 18" belt, 20" pan, 12" sides, electric drive 122 Belt Conveyor 17" x 22', 14" belt, 8" sides, electric drive 123 Mellott Bark Conveyor New in 2002, 26" x 58', elevated, electric drive, 23" pan, 13" sides, 6 1/2" x 22" paddles 124 Comact 5 Strand Log Deck New in 2002, 18' x 42' legs to ground, front legs to support beam, one strand has no chain, electric drive 125 Comact Wave Log Feeder New in 2002, 18' x 10' x 10' tall, electric powered centrifugal drive, no support structure 126 Belt Log Conveyor (1st of an entirety) New in 2002, 18" x 28', infeed to debarker, hourglass lift roll on end, leg support to first beam, no catwalk 127 2002 Nicholson A5B Ring Debarker (Part of an entirety) New in 2002, Model: 17" A5B R.H., SN: 7250, High speed debarker, 75 hp electric motor on head, 6 arm, This unit had service inspections done twice annually by Nicholson, Nicholson did a complete rebuild on the ring within the last two years! no support structure. Includes 8'8" x 10' x 8" high operator cab with all controls except MDI control box, cab has heat and AC, no electrical under cab. 127A Operator Cab with Controls (Part of an entirety) 8'8" x 10' x 8" high, all controls in cab except MDI control box, has heat and AC, no electrical under cab 128 MDI TWA2000 Log Metal Detector (Part of an entirety) New in 2002, 18" x 26' feed through belt, 42" x 34' overall conveyor, 8 hourglass rolls on end, controls in cab/8' fiberglass section, legs to first beam only, 34" x 26" inside opening, electric drive 129 Belt Conveyor with Log Kickers (Part of an entirety) New in 2002, 35" x 83', 18" belt, 18" sides, 2 kicker sections with air cylinders, legs to first beam only 128A Nickleson Ring Debarker Entirety of Lots 126 to 128 With 10% raise. Also is included in a master entirety 129A Slide Pan with Log Catcher (Part of an entirety) New in 2002, 18' x 13' slide pan, 7' x 8' landing deck, 6' x 8' landing deck, support legs to ground 129B Electrical to Debarker (Part of an entirety) New in 2002, Wiring to cutout box on equipment, all electrical in 2 stories under cab, Allen Bradley 1336 Plus II sensor less vector control, 600 amp motor control center, Comact control box 129C Purus EP320 Gear Oil with Air Pumps (Part of an entirety) New in 2002, Approx. 150 gallon new oil, 2 air cylinder pumps, automated lubrication, air control valves on wall, system automatically oils gear on debarker 129D Hydraulic Pak (Part of an entirety) New in 2002, 2 hp electric with control valve 129E Entirety of Lots 126-129D With 10% raise. Included in the master entirety 130 Comact 4 Strand Log Deck New in 2002, 14' x 40', camelback chain, electric drive, support to ground 131 Balanced Vibrating Conveyor New in 2002, 45" x 96', 24" pan, 13" sides, electric drive, bottom frame is in concrete 132 Comact 5 Strand Log Deck New in 2002, 18' x 45', 38" high sides, 4' x 8' slide pan, log stop on end, one strand has no chain, electric drive, catwalk overdeck only 132A Steel Support Structure Under Debarker New in 2002, Side guards, slide pans, steel posts, catwalk and stairs around debarker and decks, all support not lotted with equipment 133 Mill Power Vibrating Conveyor New in 2002, SN: 92401, 36" x 66', 10" sides, 18" pan, fiberglass section with MDI metal detector, no controls, chipper infeed chute, electric drive 132B Debarker Master Entirety of Lots 123 to 132A With 10% raise. 134 Progress 60" Wood Chipper New in 2002, SN: 000103, bottom discharge, 6 knives, no power 134A XE 150hp Electric Motor New in 2002, 1785 rpm, 445T frame 135 7 Strand Landing Deck FIRST LOT OF ENTIRETY New in 2002, 13' x 13', rooftop chain, steel decking, legs to first beam, electric drive 136 5 Strand Transfer Deck Part of entirety - New in 2002, 12'10" x 21', no support past first beam, electric drive 137 Comact 8 Strand Unscrambler Part of entirety - New in 2002, 18' wide x 12' x 11' tall, 4 bar with waterfall, electric drive 137A Support Structure Under Decks and Unscrambler Part of entirety - New in 2002 137B Comact PLC Control Center New in 2002 138 Screw Rolls and Accumulation Deck Part of entirety New in 2002, Deck to board loader, to optimizer, to even ender rolls, 16' x 32' section 139 Timber Automation Optimizing scanner (Part of an entirety) New in 2002, Dyna Vision M6 Laser Head (Formerly a Baxley) unit, 16', all parts available from Timber Automation, updated in 2014 with BMX 1.0 upgrade, Good for Hardwood or Softwood. 140 Paddle Fence (Part of an entirety) New in 2002, 16' wide x 20' long chain, no sprockets on one end 141 2002 Comact Hi-Tech Trimsaw (Part of an entirety) New in 2002, 7'6" x 22', 7 saw setup, feed through chains, 18' capacity, 2 waste conveyors 141A Hydraulic Power Pak and Cooler (Part of an entirety) Used for transfer decks, unscrambler, screw rolls etc. leading to trimmer, New in 2002, (2) 20 hp electric motors with pumps, oil cooler radiator, (1) 1 hp electric with pump, 24" x 6' x 3' tank 141B Optimizing Trimsaw Line Entirety of Lots 135 to 141 With 10% raise. subject to master entirety (lot 146C) 142 Comact Hi-Tech 34 Bin Sorter (1st of an entirety) New in 2002, 20' wide x approx. 150' long, sorter with infeed chains, even ending rolls hydraulic driven, fully automated, hydraulic cylinder with cable bin lift, board tipple arms, includes electrical starters/panels as marked. 142A 4 Strand Transfer Chain (Part of an entirety) New in 2002, Under sorter, 10' x approx. 150' long, can be split in 2 sections, electric drive 143 Hi-Tech Comact Transfer Deck (Part of an entirety) New in 2002, 12' 6" x 21', incline to unscrambler, electric drive 144 Comact Unscrambler (Part of an entirety) New in 2002, 20' wide x 12' x 10' tall, electric drive 145 Automatic Lumber Stacker (Part of an entirety) New in 2002, 16' wide, screw rolls for even ender, pack hoist and out feed rolls, 9" x 100" rolls, Batton in feed chains 145A 3 Strand Transfer Deck (Part of an entirety) New in 2002, 6' x 40', support steel to ground, electric drive 146 Package Deck Outfeed (Part of an entirety) New in 2002, 11' x 36' transfer deck with popup chains, outfeed roll case 10' x 30', 9" x 100" rolls, electric drive 146A Hydraulic Pak for Sorter with Cooler (Part of an entirety) Used for sorter/stacker, New in 2002, (3) 30 hp electric with pumps, (1) 40 hp electric with pumps, 4' x 8' x 4' tank, oil cooler radiator 146B Comact Auto Stacker Entirety of Lots 142 to 146 With 10% raise. subject to master entirety (lot 146C) 146C Master Entirety of Lots 135-146B With 10% raise 150 Atlas Copco Air Compressor New in 2002, Model: GA110, SN: 8972931639, 150 hp electric drive, includes duct work on top 146B Steel Building Over Sorter (Part of an entirety) 40' x 320', one sided roof, high side wall 42', (3) man doors, (2) 10' x 10' overhead doors, (1) 20' x 20' overhead doors 146C Omega II Radiant Heaters (Part of an entirety) 8 pieces, 50' long each, Nat gas 150A Hankinson Air Dryer New in 2002, Model: HHL-460, SN: H1743080001002-1, 110 V controls, 44" x 44" x 7' tall 151 Gardner Denver Air Dryer SELLS AFTER LOT 152 - New in 2002, Model: DHG930, SN: 1000002842656, 110 controls, overall 9'6" high x 55" x 55" 146D Comact Sorter and Stacker Master Entirety of Lots 143 to 146C With 10% raise. Optimizer, trimsaw, 34 bin sorter, stacker 152 Gardner Denver Air Compressor and Cooler New in 2002, 125 hp compressor, model: ECQQNA, SN: M04672, Date: 8/1984, meter reads: 39156, disconnect box, air cooler radiator 152A Schneider Electric Soft Start New in 2002, Model: ATS48C17Y 153 Chip Holding Bin New in 2002, Base 16' x 56' holds approx. 350 cu.yd., 3 drawer dump with hydraulic controls, bucket elevator 24' x 56" x 65' tall 155 Baker Single Head Resaw with Runaround (1st of an entirety) Model: BBR-O, SN: 93-717, 1" x 28" wheels, 12" x 15' feed belt electric driven, no belt on return, 30 hp electric on band, live press down rolls, Makita routers for groove cutting, 156 4 Strand Transfer Deck (Part of an entirety) 6' x 17', electric drive 157 4 Strand Transfer Deck (Part of an entirety) 6' x 10', electric drive 157A 2 Strand Transfer Deck (Part of an entirety) 6' x 18', electric drive 157B Baker Resaw Entirety of Lots 155 to 157A With 10% raise 158 2003 Gardner Denver Air Compressor Model: EAM99C, SN: S162685, 70 hp electric motor 159 Ingersoll Rand Air Compressor Compressor model: 7100, SN: 9053360, tank mounted, 15 hp electric motor, plug in ready, 120 gallon tank, 160 Morbark Chip Pak Model: 58, SN 862, 6' x 6' shaker screen, 6 knives, this unit had an easy life of chipping scraps off of the picket fence line. Good unit! 160A Lincoln Electric Motor 100 hp, 1785 rpm, 405T frame, includes soft start, electric cut out 161 Concave Belt Conveyor 36" x 106', 24" belt, catwalk along side 162 Sullair 110E S-Energy SN: 201008240041, Model: 1109E/A, plug in ready, hours unknown 163 Classifier Chip Sorter 54" x 100", electric drive 164 Paddle Chain Conveyor 19" x 28', 13 1/2" pan, 12 1/2" paddles, electric drive 165 Ash Auger 28" x 12', 9" auger, firebrick lined, electric drive 166 Mellott Vibrating Conveyor 34 1/2" x 10' section with screen, 8" sides, chipper adapter chute, 34 1/2" x 26' with drive unit, 5' fiberglass section, 24" pan 167 Belt Conveyor 12" pan x 25', electric drive 168 Chain Conveyor 24" pan x 70', 14" sides, 11" ladderback chain, in 2 sections, electric drive 169 Auger Conveyor 21" x 22', 14" auger, electric drive 170 Ash Box 44" x 67" x 57", ash transport box, 2 pieces 171 Mellott Vibrating Conveyor 36" pan, (2) 10' with drive unit no power, 10" sides, (1) 10' with 8" sides, (1) 5' with 10" sides, (1) 5' fiberglass section 10" sides 172 Chain Conveyor 19" x 32', 11" ladderback chain, electric drive 173 Belt Conveyor 24" pan x 15', electric drive 174 Auger Conveyor 25" x 35', 17" auger, electric drive 175 Paddle Conveyor 14" pan x 27', 3" x 13" paddles, no motor 176 Mellott Vibrating Conveyor 25" x 52', 19" pan, 4" sides, screen section, drive unit, no motor 176A Vibrating Conveyor 25" x 40', 19" pan, 4" sides and slide plan, drive unit, no motor 177 Precision Vibrating Conveyor Model: 15FT, SN: V2361, 31" x 15', 18" pan, 9" sides, 5' fiberglass section with metal detector, no controls, drive unit with electric motor, chipper adapter 178 Belt Conveyor 30" pan x 32', 29" belt, no drive 178A Roller 4' x 6' deck, 12" roller, ball hitch 178B Pipe Fittings and Rolls Steel 5" pipe fittings, (16) 6" x 54" rolls, 1 3/16" hub 178C Skate Rolls and Guard Fence Expandable skate rolls 2 sections, Versa-Guard expandable fence 179 2006 Slant Wood Fired Boiler Model: U1X0750-32006, SN: P6373-00, 15 PSI operating pressure, 25 125 BTU complete system, includes all the electrical inside the building including the electrical control room and the 400 AMP main, all conveyors and support equipment, walking floor sawdust holding area with 2 hydraulic packs, augers and conveyors, no pipe outside of building. Last inspection expired in 2017 (when they shut the kiln (lot 181) down) 180 Building That Holds Boiler 50' x 70' steel frame, 30' sides, insulated 181 Dry Kiln Building SELLS AFTER LOT 182 - 60' x 90' aluminum building, includes steel rail in concrete, 8 rails approx. 300' each, radiators and pipe inside building, shut down approx. 2017 182 Dry Kiln Building This kiln was in full production till the plant closed in the fall of 2022, 50' x 90' aluminum building, all fans and radiators inside 182A Meters and Controls for Kiln All electric in room, SII PC7485 controllers 182B Schneider AC Drive SN: 881048000043, Model: 250H460VACDR, 250 hp, 460 V 183 1994 Hurst Natural Gas Boiler Model: S4-G-600-15, SN: 2521, 1400000 BTU., last inspection expired in November of 2022, was working well when shut down, all support equipment in boiler room 184 Steel Supports, Stairs, and Catwalk Steel posts that support control room, (outside kiln) contents of control room 185 Filters Wix and Napa Oil and air filters, all filters on table 186 MDI XR3000 Metal Detector Model: XR-36-S, SN: XRS-11285, 24" x 48" under conveyor metal detector, control box model: CR-85 3000, SN: EV11039 187 MDI XR3000 Metal Detector Control box not complete, 24" x 36" under conveyor metal detector 188 MDI Metal Detector Control box, 16" x 32" under conveyor metal detector 189 Steel Structure Frame (outside sorter building) 18' x 45' x 18' tall, 6" x 8" I beams 190 Belt Conveyor 30" x 28', electric drive 191 Concave Belt Conveyor 42" x 70', 30" belt, so support legs, electric drive 192 West Plains Resaw 1" x 36" wheels, 1 1/4" band, electric control box, electric motor on head, chain feed web electric drive, no support structure, electric control box 193 Concave Belt Conveyor 41" x 50', catwalk and stairs, electric drive 194 Belt Conveyor 42" x 20', legs to ground, electric drive 197 Gardner Denver Air Compressor New in 2019 with less then 2 years of run time! Model: VSI225-260A, SN: S562325, (2) 127 kw electric motors, variable frequency drive compressor, very energy efficient. - Located at: 6251 Gerwoude DR McBain MI (14 miles from the auction site) 195 198 Gardner Denver Air Compressor 48" blower, 20 hp electric motor - Located at: 6251 Gerwoude DR McBain MI (14 miles from the auction site) 196 198A Stringer Chipper Model: 600SS, SN: 0055, 8 knives, brake on pulley - Located at: 6251 Gerwoude DR McBain MI (14 miles from the auction site) 197 198B World Energy Electric Motor 250 hp, 1185 rpm, N587U7 frame - Located at: 6251 Gerwoude DR McBain MI (14 miles from the auction site) 199 Chip Shaker Screen 8'6" x 15', electric drive - Located at: 6251 Gerwoude DR McBain MI (14 miles from the auction site) 200 Cyclone 9' x 15', includes frame and catwalk, 24" inlet - Located at: 6251 Gerwoude DR McBain MI (14 miles from the auction site) 201 Precision Vibrating Conveyor 36" x 23', 5' fiberglass section, screen section, 24" pan, 12" sides, I beam frame, electric drive - Located at: 6251 Gerwoude DR McBain MI (14 miles from the auction site) 202 Kim Wood Hog 36" x 36" open top, bottom discharge - Located at: 6251 Gerwoude DR McBain MI (14 miles from the auction site) 202A World Energy Electric Motor 250 hp, 1185 rpm, N587UZ frame - Located at: 6251 Gerwoude DR McBain MI (14 miles from the auction site) 203 4 Strand Transfer Deck 11' x 17', electric drive - Located at: 6251 Gerwoude DR McBain MI (14 miles from the auction site) 204 2017 PHL 60” Bottom Discharge Chipper (Location Newton MS Plant) only in service from 2017 till 2022 when it was removed due to capacity. good unit! 205 60” Stringer Chipper Top Discharge (Location Prentice WI Plant) This chipper had an easy life of chipping scraps that came off the planer line. Still a good unit! 206 Claussen All Mark Lumber Grade Stamper (Location Prentice WI Plant) 207 MDI TWI-2000 Metal Detector for planer Never installed (Location Prentice WI Plant)

Listing Information

Biewer Sawmill LLC has decided to liquidate their Lake City plant, but they are by no means going out of business. In fact, they have increased production and remain stronger than ever! The equipment, from the Nicholson ring debarker to the bin sorter, is well-maintained and in excellent condition. Don't miss this rare opportunity to purchase top-quality equipment! We are accepting consignments to add to this auction.

Information Lot
This is an absolute auction, meaning no minimums, no reserves, and no seller bidding! The highest bidder will be the new owner!
Auction Agent: Eugene Hochstetler 574-242-1100
Type of Auction: Late model sawmill equipment
Highlight Pieces: Nicholson ring debarker, 34 bay bin sorter, several almost new chip pacs, much more quality equipment
Seller Name: Biewer Sawmill LLC

Preview Information
Day prior or by appointment
Location of auction: 1560 W Houghton Lake RD, Lake City, MI 49651

Loadout Information
Free loadout on uninstalled Equipment day of auction until 4 pm, Friday (9/8) from 8am to 4pm, yard closed on Saturday. From there on by appointment only. All items that don't requiring rigging must be removed within 14 days. Contact Mose Troyer 330-763-3780

Payment Information
Payment terms: 10% Onsite and 13% Online Buyer's Premium in affect for all purchases. Cash, check, wire transfer. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice. Onsite buyers, payment is due the day of the auction. If onsite bidders wish to send a wire and still be assessed only the onsite buyer’s premium, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction.

3156G Live Heel Log Loader 1/50 Die-Cast Metal Replica
Have fun buying a high-quality, die-cast toy! All proceeds including buyer's premium will go to Feed My Starving Children (FMSC) which is a Christian nonprofit dedicated to seeing every child and person around the world healthy, nourished and whole in body and spirit. Bright Star will pay for standard shipping and handling to the 48 contiguous states for buyers of this lot.
https://www.youtube.com/watch?v=jYATxeDmuzM&t=8s

Heavy Equipment Key Set 36 Keys
Shipping available for $20

Manual Sealless Steel Strapping Tool
Model A333, works for 1/2" 5/8" or 3/4" banding, new in box. Shipping available for $30

100

2002 Ski-Doo Bombardier
Model: Tundra R, VIN: 2BPS327892V002112, needs new start switch, condition unknown

101

Hydraulic Shop Press
52" x 8', heavy duty, 4 1/2" bore, 20" stroke, cage enclosure, hydraulic pak

101

Ingersoll Rand Air Compressor*
Model: TS4N5, SN: 60053900, electric drive, mounted on 80 gallon tank.

120

Belt Conveyor
24' x 22', 18" belt, no support frame, electric drive

121

Belt Conveyor
22" x 30', 18" belt, 20" pan, 12" sides, electric drive

122

Belt Conveyor
17" x 22', 14" belt, 8" sides, electric drive

123

Mellott Bark Conveyor
New in 2002, 26" x 58', elevated, electric drive, 23" pan, 13" sides, 6 1/2" x 22" paddles

124

Comact 5 Strand Log Deck
New in 2002, 18' x 42' legs to ground, front legs to support beam, one strand has no chain, electric drive

125

Comact Wave Log Feeder
New in 2002, 18' x 10' x 10' tall, electric powered centrifugal drive, no support structure

126

Belt Log Conveyor
(1st of an entirety) New in 2002, 18" x 28', infeed to debarker, hourglass lift roll on end, leg support to first beam, no catwalk

127

2002 Nicholson A5B Ring Debarker
(Part of an entirety) New in 2002, Model: 17" A5B R.H., SN: 7250, High speed debarker, 75 hp electric motor on head, 6 arm, This unit had service inspections done twice annually by Nicholson, Nicholson did a complete rebuild on the ring within the last two years! no support structure. Includes 8'8" x 10' x 8" high operator cab with all controls except MDI control box, cab has heat and AC, no electrical under cab.

127A

Operator Cab with Controls
(Part of an entirety) 8'8" x 10' x 8" high, all controls in cab except MDI control box, has heat and AC, no electrical under cab

128

MDI TWA2000 Log Metal Detector
(Part of an entirety) New in 2002, 18" x 26' feed through belt, 42" x 34' overall conveyor, 8 hourglass rolls on end, controls in cab/8' fiberglass section, legs to first beam only, 34" x 26" inside opening, electric drive

129

Belt Conveyor with Log Kickers
(Part of an entirety) New in 2002, 35" x 83', 18" belt, 18" sides, 2 kicker sections with air cylinders, legs to first beam only

128A

Nickleson Ring Debarker Entirety of Lots 126 to 128
With 10% raise. Also is included in a master entirety

129A

Slide Pan with Log Catcher
(Part of an entirety) New in 2002, 18' x 13' slide pan, 7' x 8' landing deck, 6' x 8' landing deck, support legs to ground

129B

Electrical to Debarker
(Part of an entirety) New in 2002, Wiring to cutout box on equipment, all electrical in 2 stories under cab, Allen Bradley 1336 Plus II sensor less vector control, 600 amp motor control center, Comact control box

129C

Purus EP320 Gear Oil with Air Pumps
(Part of an entirety) New in 2002, Approx. 150 gallon new oil, 2 air cylinder pumps, automated lubrication, air control valves on wall, system automatically oils gear on debarker

129D

Hydraulic Pak
(Part of an entirety) New in 2002, 2 hp electric with control valve

129E

Entirety of Lots 126-129D
With 10% raise. Included in the master entirety

130

Comact 4 Strand Log Deck
New in 2002, 14' x 40', camelback chain, electric drive, support to ground

131

Balanced Vibrating Conveyor
New in 2002, 45" x 96', 24" pan, 13" sides, electric drive, bottom frame is in concrete

132

Comact 5 Strand Log Deck
New in 2002, 18' x 45', 38" high sides, 4' x 8' slide pan, log stop on end, one strand has no chain, electric drive, catwalk overdeck only

132A

Steel Support Structure Under Debarker
New in 2002, Side guards, slide pans, steel posts, catwalk and stairs around debarker and decks, all support not lotted with equipment

133

Mill Power Vibrating Conveyor
New in 2002, SN: 92401, 36" x 66', 10" sides, 18" pan, fiberglass section with MDI metal detector, no controls, chipper infeed chute, electric drive

132B

Debarker Master Entirety of Lots 123 to 132A
With 10% raise.

134

Progress 60" Wood Chipper
New in 2002, SN: 000103, bottom discharge, 6 knives, no power

134A

XE 150hp Electric Motor
New in 2002, 1785 rpm, 445T frame

135

7 Strand Landing Deck
FIRST LOT OF ENTIRETY New in 2002, 13' x 13', rooftop chain, steel decking, legs to first beam, electric drive

136

5 Strand Transfer Deck
Part of entirety - New in 2002, 12'10" x 21', no support past first beam, electric drive

137

Comact 8 Strand Unscrambler
Part of entirety - New in 2002, 18' wide x 12' x 11' tall, 4 bar with waterfall, electric drive

137A

Support Structure Under Decks and Unscrambler
Part of entirety - New in 2002

137B

Comact PLC Control Center
New in 2002

138

Screw Rolls and Accumulation Deck
Part of entirety New in 2002, Deck to board loader, to optimizer, to even ender rolls, 16' x 32' section

139

Timber Automation Optimizing scanner
(Part of an entirety) New in 2002, Dyna Vision M6 Laser Head (Formerly a Baxley) unit, 16', all parts available from Timber Automation, updated in 2014 with BMX 1.0 upgrade, Good for Hardwood or Softwood.

140

Paddle Fence
(Part of an entirety) New in 2002, 16' wide x 20' long chain, no sprockets on one end

141

2002 Comact Hi-Tech Trimsaw
(Part of an entirety) New in 2002, 7'6" x 22', 7 saw setup, feed through chains, 18' capacity, 2 waste conveyors

141A

Hydraulic Power Pak and Cooler
(Part of an entirety) Used for transfer decks, unscrambler, screw rolls etc. leading to trimmer, New in 2002, (2) 20 hp electric motors with pumps, oil cooler radiator, (1) 1 hp electric with pump, 24" x 6' x 3' tank

141B

Optimizing Trimsaw Line Entirety of Lots 135 to 141
With 10% raise. subject to master entirety (lot 146C)

142

Comact Hi-Tech 34 Bin Sorter
(1st of an entirety) New in 2002, 20' wide x approx. 150' long, sorter with infeed chains, even ending rolls hydraulic driven, fully automated, hydraulic cylinder with cable bin lift, board tipple arms, includes electrical starters/panels as marked.

142A

4 Strand Transfer Chain
(Part of an entirety) New in 2002, Under sorter, 10' x approx. 150' long, can be split in 2 sections, electric drive

143

Hi-Tech Comact Transfer Deck
(Part of an entirety) New in 2002, 12' 6" x 21', incline to unscrambler, electric drive

144

Comact Unscrambler
(Part of an entirety) New in 2002, 20' wide x 12' x 10' tall, electric drive

145

Automatic Lumber Stacker
(Part of an entirety) New in 2002, 16' wide, screw rolls for even ender, pack hoist and out feed rolls, 9" x 100" rolls, Batton in feed chains

145A

3 Strand Transfer Deck
(Part of an entirety) New in 2002, 6' x 40', support steel to ground, electric drive

146

Package Deck Outfeed
(Part of an entirety) New in 2002, 11' x 36' transfer deck with popup chains, outfeed roll case 10' x 30', 9" x 100" rolls, electric drive

146A

Hydraulic Pak for Sorter with Cooler
(Part of an entirety) Used for sorter/stacker, New in 2002, (3) 30 hp electric with pumps, (1) 40 hp electric with pumps, 4' x 8' x 4' tank, oil cooler radiator

146B

Comact Auto Stacker Entirety of Lots 142 to 146
With 10% raise. subject to master entirety (lot 146C)

146C

Master Entirety of Lots 135-146B
With 10% raise

150

Atlas Copco Air Compressor
New in 2002, Model: GA110, SN: 8972931639, 150 hp electric drive, includes duct work on top

146B

Steel Building Over Sorter
(Part of an entirety) 40' x 320', one sided roof, high side wall 42', (3) man doors, (2) 10' x 10' overhead doors, (1) 20' x 20' overhead doors

146C

Omega II Radiant Heaters
(Part of an entirety) 8 pieces, 50' long each, Nat gas

150A

Hankinson Air Dryer
New in 2002, Model: HHL-460, SN: H1743080001002-1, 110 V controls, 44" x 44" x 7' tall

151

Gardner Denver Air Dryer
SELLS AFTER LOT 152 - New in 2002, Model: DHG930, SN: 1000002842656, 110 controls, overall 9'6" high x 55" x 55"

146D

Comact Sorter and Stacker Master Entirety of Lots 143 to 146C
With 10% raise. Optimizer, trimsaw, 34 bin sorter, stacker

152

Gardner Denver Air Compressor and Cooler
New in 2002, 125 hp compressor, model: ECQQNA, SN: M04672, Date: 8/1984, meter reads: 39156, disconnect box, air cooler radiator

152A

Schneider Electric Soft Start
New in 2002, Model: ATS48C17Y

153

Chip Holding Bin
New in 2002, Base 16' x 56' holds approx. 350 cu.yd., 3 drawer dump with hydraulic controls, bucket elevator 24' x 56" x 65' tall

155

Baker Single Head Resaw with Runaround
(1st of an entirety) Model: BBR-O, SN: 93-717, 1" x 28" wheels, 12" x 15' feed belt electric driven, no belt on return, 30 hp electric on band, live press down rolls, Makita routers for groove cutting,

156

4 Strand Transfer Deck
(Part of an entirety) 6' x 17', electric drive

157

4 Strand Transfer Deck
(Part of an entirety) 6' x 10', electric drive

157A

2 Strand Transfer Deck
(Part of an entirety) 6' x 18', electric drive

157B

Baker Resaw Entirety of Lots 155 to 157A
With 10% raise

158

2003 Gardner Denver Air Compressor
Model: EAM99C, SN: S162685, 70 hp electric motor

159

Ingersoll Rand Air Compressor
Compressor model: 7100, SN: 9053360, tank mounted, 15 hp electric motor, plug in ready, 120 gallon tank,

160

Morbark Chip Pak
Model: 58, SN 862, 6' x 6' shaker screen, 6 knives, this unit had an easy life of chipping scraps off of the picket fence line. Good unit!

160A

Lincoln Electric Motor
100 hp, 1785 rpm, 405T frame, includes soft start, electric cut out

161

Concave Belt Conveyor
36" x 106', 24" belt, catwalk along side

162

Sullair 110E S-Energy
SN: 201008240041, Model: 1109E/A, plug in ready, hours unknown

163

Classifier Chip Sorter
54" x 100", electric drive

164

Paddle Chain Conveyor
19" x 28', 13 1/2" pan, 12 1/2" paddles, electric drive

165

Ash Auger
28" x 12', 9" auger, firebrick lined, electric drive

166

Mellott Vibrating Conveyor
34 1/2" x 10' section with screen, 8" sides, chipper adapter chute, 34 1/2" x 26' with drive unit, 5' fiberglass section, 24" pan

167

Belt Conveyor
12" pan x 25', electric drive

168

Chain Conveyor
24" pan x 70', 14" sides, 11" ladderback chain, in 2 sections, electric drive

169

Auger Conveyor
21" x 22', 14" auger, electric drive

170

Ash Box
44" x 67" x 57", ash transport box, 2 pieces

171

Mellott Vibrating Conveyor
36" pan, (2) 10' with drive unit no power, 10" sides, (1) 10' with 8" sides, (1) 5' with 10" sides, (1) 5' fiberglass section 10" sides

172

Chain Conveyor
19" x 32', 11" ladderback chain, electric drive

173

Belt Conveyor
24" pan x 15', electric drive

174

Auger Conveyor
25" x 35', 17" auger, electric drive

175

Paddle Conveyor
14" pan x 27', 3" x 13" paddles, no motor

176

Mellott Vibrating Conveyor
25" x 52', 19" pan, 4" sides, screen section, drive unit, no motor

176A

Vibrating Conveyor
25" x 40', 19" pan, 4" sides and slide plan, drive unit, no motor

177

Precision Vibrating Conveyor
Model: 15FT, SN: V2361, 31" x 15', 18" pan, 9" sides, 5' fiberglass section with metal detector, no controls, drive unit with electric motor, chipper adapter

178

Belt Conveyor
30" pan x 32', 29" belt, no drive

178A

Roller
4' x 6' deck, 12" roller, ball hitch

178B

Pipe Fittings and Rolls
Steel 5" pipe fittings, (16) 6" x 54" rolls, 1 3/16" hub

178C

Skate Rolls and Guard Fence
Expandable skate rolls 2 sections, Versa-Guard expandable fence

179

2006 Slant Wood Fired Boiler
Model: U1X0750-32006, SN: P6373-00, 15 PSI operating pressure, 25 125 BTU complete system, includes all the electrical inside the building including the electrical control room and the 400 AMP main, all conveyors and support equipment, walking floor sawdust holding area with 2 hydraulic packs, augers and conveyors, no pipe outside of building. Last inspection expired in 2017 (when they shut the kiln (lot 181) down)

180

Building That Holds Boiler
50' x 70' steel frame, 30' sides, insulated

181

Dry Kiln Building
SELLS AFTER LOT 182 - 60' x 90' aluminum building, includes steel rail in concrete, 8 rails approx. 300' each, radiators and pipe inside building, shut down approx. 2017

182

Dry Kiln Building
This kiln was in full production till the plant closed in the fall of 2022, 50' x 90' aluminum building, all fans and radiators inside

182A

Meters and Controls for Kiln
All electric in room, SII PC7485 controllers

182B

Schneider AC Drive
SN: 881048000043, Model: 250H460VACDR, 250 hp, 460 V

183

1994 Hurst Natural Gas Boiler
Model: S4-G-600-15, SN: 2521, 1400000 BTU., last inspection expired in November of 2022, was working well when shut down, all support equipment in boiler room

184

Steel Supports, Stairs, and Catwalk
Steel posts that support control room, (outside kiln) contents of control room

185

Filters Wix and Napa
Oil and air filters, all filters on table

186

MDI XR3000 Metal Detector
Model: XR-36-S, SN: XRS-11285, 24" x 48" under conveyor metal detector, control box model: CR-85 3000, SN: EV11039

187

MDI XR3000 Metal Detector
Control box not complete, 24" x 36" under conveyor metal detector

188

MDI Metal Detector
Control box, 16" x 32" under conveyor metal detector

189

Steel Structure Frame
(outside sorter building) 18' x 45' x 18' tall, 6" x 8" I beams

190

Belt Conveyor
30" x 28', electric drive

191

Concave Belt Conveyor
42" x 70', 30" belt, so support legs, electric drive

192

West Plains Resaw
1" x 36" wheels, 1 1/4" band, electric control box, electric motor on head, chain feed web electric drive, no support structure, electric control box

193

Concave Belt Conveyor
41" x 50', catwalk and stairs, electric drive

194

Belt Conveyor
42" x 20', legs to ground, electric drive

197

Gardner Denver Air Compressor
New in 2019 with less then 2 years of run time! Model: VSI225-260A, SN: S562325, (2) 127 kw electric motors, variable frequency drive compressor, very energy efficient. - Located at: 6251 Gerwoude DR McBain MI (14 miles from the auction site)

195

198

Gardner Denver Air Compressor
48" blower, 20 hp electric motor - Located at: 6251 Gerwoude DR McBain MI (14 miles from the auction site)

196

198A

Stringer Chipper
Model: 600SS, SN: 0055, 8 knives, brake on pulley - Located at: 6251 Gerwoude DR McBain MI (14 miles from the auction site)

197

198B

World Energy Electric Motor
250 hp, 1185 rpm, N587U7 frame - Located at: 6251 Gerwoude DR McBain MI (14 miles from the auction site)

199

Chip Shaker Screen
8'6" x 15', electric drive - Located at: 6251 Gerwoude DR McBain MI (14 miles from the auction site)

200

Cyclone
9' x 15', includes frame and catwalk, 24" inlet - Located at: 6251 Gerwoude DR McBain MI (14 miles from the auction site)

201

Precision Vibrating Conveyor
36" x 23', 5' fiberglass section, screen section, 24" pan, 12" sides, I beam frame, electric drive - Located at: 6251 Gerwoude DR McBain MI (14 miles from the auction site)

202

Kim Wood Hog
36" x 36" open top, bottom discharge - Located at: 6251 Gerwoude DR McBain MI (14 miles from the auction site)

202A

World Energy Electric Motor
250 hp, 1185 rpm, N587UZ frame - Located at: 6251 Gerwoude DR McBain MI (14 miles from the auction site)

203

4 Strand Transfer Deck
11' x 17', electric drive - Located at: 6251 Gerwoude DR McBain MI (14 miles from the auction site)

204

2017 PHL 60” Bottom Discharge Chipper
(Location Newton MS Plant) only in service from 2017 till 2022 when it was removed due to capacity. good unit!

205

60” Stringer Chipper Top Discharge
(Location Prentice WI Plant) This chipper had an easy life of chipping scraps that came off the planer line. Still a good unit!

206

Claussen All Mark Lumber Grade Stamper
(Location Prentice WI Plant)

207

MDI TWI-2000 Metal Detector for planer
Never installed (Location Prentice WI Plant)

Photo Gallery

Share This Listing

Other Sales by
This Company

Nov 8
Mio, MI

Nov 13
Various, IN

Jan 1
Des Arc, AR

Oct 1
Middlebury, IN

Late Model Sawmill Equipment - Lake City, MI

Bright Star Realty and Auctions, INC

Contact: Loren Beachy
Phone: 574-825-0704

1560 W Houghton Lake RD
Lake City, MI 49651

Thursday Sep 7, 2023 Completed

All equipment is being sold “AS-IS, WHERE- IS” with NO warranties expressed or implied.
All equipment must be paid for IN FULL before equipment removal.
All Equipment must be removed from Biewer Sawmill Lake City LLC. by no later than 12/01/2023
Entry to the property must be scheduled
Any doing any work on the property must complete the Biewer Sawmill Lake City LLC Contractor Training Program and adhere to the program 100%
Purchaser’s or Purchaser representative (including all sub-contractors) Certificate of Liability Insurance MUST BE PRESENT AT TIME OF RETRIEVAL OF PURCHASED EQUIPMENT AND INCLUDE:
- At least 1,000,000 General Liability Each Occurrence
- At least 2,000,000 General Liability General Aggregate
- At least 500,000 Work Comp & Employers Liability Coverage
All Rigging/loading will be the responsibility of the purchaser
Spark watch for hot work will be the responsibility of the purchaser and must comply with Biewer Hot Work Policy
Purchaser must utilize the Stored Entry Isolation & De-Energization Checklist prior to decommissioning any equipment in order to safely identify and resolve stored energy hazards
All buildings and equipment are to be returned to their original condition prior to leaving the property (ie: If necessary to remove a panel of wall or roof to obtain purchased equipment, the purchaser must return the panel to its original location and fastened in its original fashion)
Floors must be left clean and free from debris and fasteners must be flush with the floor, any concrete damaged during equipment retrieval must be repaired prior to leaving the property.
All trash removal will be at the expense of the purchaser

Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded where required.
Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer:

Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.
Governing Law.
1. For Auctions in the State of Indiana and Online. Unless otherwise indicated, all Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are deemed to be entered into in the State of Indiana, all bids and payments are deemed to be received in the State of Indiana, and the contract, if any, will be deemed to be formed and entered into in the State of Indiana.
Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.
Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
Nature of the Auction. This Property is being sold at the Auction in the manner indicated on the first page of this Agreement.
Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
2. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
3. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
4. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
5. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
6. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
7. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
8. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.
9. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties, (i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
10. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
11. No Reduction or Retraction of Online Bids. Online bids may not be reduced or retracted.
12. Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.

1. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.
Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). All prebids and maxbids placed online are considered absentee bids. Auctioneer pledges complete integrity in the treatment of absentee bids and absentee bids may be initiated and advanced in accordance with Auctioneer’s policies and procedures. Auctioneer has the right to initiate any absentee bids at 25% to 50% of their maximum amount. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot of Personal Property will be the Buyer of such Property.
All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.

Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or representation by Auctioneer.
Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ringman, or multiple bid assistants or ringmen, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked-Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases are due upon receipt of your invoice. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. If onsite bidders wish to send a wire, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.
Wire Transfer Payments. Buyer shall obtain verbal verification of all bank account information from Bright Star Auctions prior to initiating transfer. Except as otherwise provided by law, we shall not be liable for any loss or damage due to misplaced, unauthorized or fraudulent fund transfers.
ACH/eCheck Payments. By providing account information to Bright Star Auctions, buyer gives permission for Bright Star Auctions to retain payment information on file and represents they are the authorized account holder. Upon authorization to collect payment from Buyers account and prior to transfer, Buyer is responsible to notify their financial institution of the impending transaction. Buyer agrees to notify Bright Star Auctions of any changes in account information.
Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.

No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Tools, packing material, and/or assistance will not be supplied at Pickup, so Buyer must plan accordingly. Disassembly and removal shall be done in a quiet and workmanlike manner, and each Buyer, in making its bid, shall thereby indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer’s employees, agents, representatives, or independent contractors in connection with the Pickup. Any and all damages to the Pickup site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller. Each Buyer must show a copy of the invoice (digital or hard copy) and government-issued photo identification before Lots will be released. No Buyer shall bring pets or young children to the Pickup, as the movement of Lots presents an extremely high-risk environment that could result in injury or death.
Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them. In addition, Buyer’s bidding privileges may be suspended at future auctions.
Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.
Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled to specific performance or other equitable relief.
Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim or suit relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their rights.

Listing Details
Biewer Sawmill LLC has decided to liquidate their Lake City plant, but they are by no means going out of business. In fact, they have increased production and remain stronger than ever! The equipment, from the Nicholson ring debarker to the bin sorter, is well-maintained and in excellent condition. Don't miss this rare opportunity to purchase top-quality equipment! We are accepting consignments to add to this auction. 00 Information Lot This is an absolute auction, meaning no minimums, no reserves, and no seller bidding! The highest bidder will be the new owner! Auction Agent: Eugene Hochstetler 574-242-1100 Type of Auction: Late model sawmill equipment Highlight Pieces: Nicholson ring debarker, 34 bay bin sorter, several almost new chip pacs, much more quality equipment Seller Name: Biewer Sawmill LLC 01 Preview Information Day prior or by appointment Location of auction: 1560 W Houghton Lake RD, Lake City, MI 49651 02 Loadout Information Free loadout on uninstalled Equipment day of auction until 4 pm, Friday (9/8) from 8am to 4pm, yard closed on Saturday. From there on by appointment only. All items that don't requiring rigging must be removed within 14 days. Contact Mose Troyer 330-763-3780 03 Payment Information Payment terms: 10% Onsite and 13% Online Buyer's Premium in affect for all purchases. Cash, check, wire transfer. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice. Onsite buyers, payment is due the day of the auction. If onsite bidders wish to send a wire and still be assessed only the onsite buyer’s premium, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. 93 3156G Live Heel Log Loader 1/50 Die-Cast Metal Replica Have fun buying a high-quality, die-cast toy! All proceeds including buyer's premium will go to Feed My Starving Children (FMSC) which is a Christian nonprofit dedicated to seeing every child and person around the world healthy, nourished and whole in body and spirit. Bright Star will pay for standard shipping and handling to the 48 contiguous states for buyers of this lot. https://www.youtube.com/watch?v=jYATxeDmuzM&t=8s 98 Heavy Equipment Key Set 36 Keys Shipping available for $20 99 Manual Sealless Steel Strapping Tool Model A333, works for 1/2" 5/8" or 3/4" banding, new in box. Shipping available for $30 100 2002 Ski-Doo Bombardier Model: Tundra R, VIN: 2BPS327892V002112, needs new start switch, condition unknown 101 Hydraulic Shop Press 52" x 8', heavy duty, 4 1/2" bore, 20" stroke, cage enclosure, hydraulic pak 101 Ingersoll Rand Air Compressor* Model: TS4N5, SN: 60053900, electric drive, mounted on 80 gallon tank. 120 Belt Conveyor 24' x 22', 18" belt, no support frame, electric drive 121 Belt Conveyor 22" x 30', 18" belt, 20" pan, 12" sides, electric drive 122 Belt Conveyor 17" x 22', 14" belt, 8" sides, electric drive 123 Mellott Bark Conveyor New in 2002, 26" x 58', elevated, electric drive, 23" pan, 13" sides, 6 1/2" x 22" paddles 124 Comact 5 Strand Log Deck New in 2002, 18' x 42' legs to ground, front legs to support beam, one strand has no chain, electric drive 125 Comact Wave Log Feeder New in 2002, 18' x 10' x 10' tall, electric powered centrifugal drive, no support structure 126 Belt Log Conveyor (1st of an entirety) New in 2002, 18" x 28', infeed to debarker, hourglass lift roll on end, leg support to first beam, no catwalk 127 2002 Nicholson A5B Ring Debarker (Part of an entirety) New in 2002, Model: 17" A5B R.H., SN: 7250, High speed debarker, 75 hp electric motor on head, 6 arm, This unit had service inspections done twice annually by Nicholson, Nicholson did a complete rebuild on the ring within the last two years! no support structure. Includes 8'8" x 10' x 8" high operator cab with all controls except MDI control box, cab has heat and AC, no electrical under cab. 127A Operator Cab with Controls (Part of an entirety) 8'8" x 10' x 8" high, all controls in cab except MDI control box, has heat and AC, no electrical under cab 128 MDI TWA2000 Log Metal Detector (Part of an entirety) New in 2002, 18" x 26' feed through belt, 42" x 34' overall conveyor, 8 hourglass rolls on end, controls in cab/8' fiberglass section, legs to first beam only, 34" x 26" inside opening, electric drive 129 Belt Conveyor with Log Kickers (Part of an entirety) New in 2002, 35" x 83', 18" belt, 18" sides, 2 kicker sections with air cylinders, legs to first beam only 128A Nickleson Ring Debarker Entirety of Lots 126 to 128 With 10% raise. Also is included in a master entirety 129A Slide Pan with Log Catcher (Part of an entirety) New in 2002, 18' x 13' slide pan, 7' x 8' landing deck, 6' x 8' landing deck, support legs to ground 129B Electrical to Debarker (Part of an entirety) New in 2002, Wiring to cutout box on equipment, all electrical in 2 stories under cab, Allen Bradley 1336 Plus II sensor less vector control, 600 amp motor control center, Comact control box 129C Purus EP320 Gear Oil with Air Pumps (Part of an entirety) New in 2002, Approx. 150 gallon new oil, 2 air cylinder pumps, automated lubrication, air control valves on wall, system automatically oils gear on debarker 129D Hydraulic Pak (Part of an entirety) New in 2002, 2 hp electric with control valve 129E Entirety of Lots 126-129D With 10% raise. Included in the master entirety 130 Comact 4 Strand Log Deck New in 2002, 14' x 40', camelback chain, electric drive, support to ground 131 Balanced Vibrating Conveyor New in 2002, 45" x 96', 24" pan, 13" sides, electric drive, bottom frame is in concrete 132 Comact 5 Strand Log Deck New in 2002, 18' x 45', 38" high sides, 4' x 8' slide pan, log stop on end, one strand has no chain, electric drive, catwalk overdeck only 132A Steel Support Structure Under Debarker New in 2002, Side guards, slide pans, steel posts, catwalk and stairs around debarker and decks, all support not lotted with equipment 133 Mill Power Vibrating Conveyor New in 2002, SN: 92401, 36" x 66', 10" sides, 18" pan, fiberglass section with MDI metal detector, no controls, chipper infeed chute, electric drive 132B Debarker Master Entirety of Lots 123 to 132A With 10% raise. 134 Progress 60" Wood Chipper New in 2002, SN: 000103, bottom discharge, 6 knives, no power 134A XE 150hp Electric Motor New in 2002, 1785 rpm, 445T frame 135 7 Strand Landing Deck FIRST LOT OF ENTIRETY New in 2002, 13' x 13', rooftop chain, steel decking, legs to first beam, electric drive 136 5 Strand Transfer Deck Part of entirety - New in 2002, 12'10" x 21', no support past first beam, electric drive 137 Comact 8 Strand Unscrambler Part of entirety - New in 2002, 18' wide x 12' x 11' tall, 4 bar with waterfall, electric drive 137A Support Structure Under Decks and Unscrambler Part of entirety - New in 2002 137B Comact PLC Control Center New in 2002 138 Screw Rolls and Accumulation Deck Part of entirety New in 2002, Deck to board loader, to optimizer, to even ender rolls, 16' x 32' section 139 Timber Automation Optimizing scanner (Part of an entirety) New in 2002, Dyna Vision M6 Laser Head (Formerly a Baxley) unit, 16', all parts available from Timber Automation, updated in 2014 with BMX 1.0 upgrade, Good for Hardwood or Softwood. 140 Paddle Fence (Part of an entirety) New in 2002, 16' wide x 20' long chain, no sprockets on one end 141 2002 Comact Hi-Tech Trimsaw (Part of an entirety) New in 2002, 7'6" x 22', 7 saw setup, feed through chains, 18' capacity, 2 waste conveyors 141A Hydraulic Power Pak and Cooler (Part of an entirety) Used for transfer decks, unscrambler, screw rolls etc. leading to trimmer, New in 2002, (2) 20 hp electric motors with pumps, oil cooler radiator, (1) 1 hp electric with pump, 24" x 6' x 3' tank 141B Optimizing Trimsaw Line Entirety of Lots 135 to 141 With 10% raise. subject to master entirety (lot 146C) 142 Comact Hi-Tech 34 Bin Sorter (1st of an entirety) New in 2002, 20' wide x approx. 150' long, sorter with infeed chains, even ending rolls hydraulic driven, fully automated, hydraulic cylinder with cable bin lift, board tipple arms, includes electrical starters/panels as marked. 142A 4 Strand Transfer Chain (Part of an entirety) New in 2002, Under sorter, 10' x approx. 150' long, can be split in 2 sections, electric drive 143 Hi-Tech Comact Transfer Deck (Part of an entirety) New in 2002, 12' 6" x 21', incline to unscrambler, electric drive 144 Comact Unscrambler (Part of an entirety) New in 2002, 20' wide x 12' x 10' tall, electric drive 145 Automatic Lumber Stacker (Part of an entirety) New in 2002, 16' wide, screw rolls for even ender, pack hoist and out feed rolls, 9" x 100" rolls, Batton in feed chains 145A 3 Strand Transfer Deck (Part of an entirety) New in 2002, 6' x 40', support steel to ground, electric drive 146 Package Deck Outfeed (Part of an entirety) New in 2002, 11' x 36' transfer deck with popup chains, outfeed roll case 10' x 30', 9" x 100" rolls, electric drive 146A Hydraulic Pak for Sorter with Cooler (Part of an entirety) Used for sorter/stacker, New in 2002, (3) 30 hp electric with pumps, (1) 40 hp electric with pumps, 4' x 8' x 4' tank, oil cooler radiator 146B Comact Auto Stacker Entirety of Lots 142 to 146 With 10% raise. subject to master entirety (lot 146C) 146C Master Entirety of Lots 135-146B With 10% raise 150 Atlas Copco Air Compressor New in 2002, Model: GA110, SN: 8972931639, 150 hp electric drive, includes duct work on top 146B Steel Building Over Sorter (Part of an entirety) 40' x 320', one sided roof, high side wall 42', (3) man doors, (2) 10' x 10' overhead doors, (1) 20' x 20' overhead doors 146C Omega II Radiant Heaters (Part of an entirety) 8 pieces, 50' long each, Nat gas 150A Hankinson Air Dryer New in 2002, Model: HHL-460, SN: H1743080001002-1, 110 V controls, 44" x 44" x 7' tall 151 Gardner Denver Air Dryer SELLS AFTER LOT 152 - New in 2002, Model: DHG930, SN: 1000002842656, 110 controls, overall 9'6" high x 55" x 55" 146D Comact Sorter and Stacker Master Entirety of Lots 143 to 146C With 10% raise. Optimizer, trimsaw, 34 bin sorter, stacker 152 Gardner Denver Air Compressor and Cooler New in 2002, 125 hp compressor, model: ECQQNA, SN: M04672, Date: 8/1984, meter reads: 39156, disconnect box, air cooler radiator 152A Schneider Electric Soft Start New in 2002, Model: ATS48C17Y 153 Chip Holding Bin New in 2002, Base 16' x 56' holds approx. 350 cu.yd., 3 drawer dump with hydraulic controls, bucket elevator 24' x 56" x 65' tall 155 Baker Single Head Resaw with Runaround (1st of an entirety) Model: BBR-O, SN: 93-717, 1" x 28" wheels, 12" x 15' feed belt electric driven, no belt on return, 30 hp electric on band, live press down rolls, Makita routers for groove cutting, 156 4 Strand Transfer Deck (Part of an entirety) 6' x 17', electric drive 157 4 Strand Transfer Deck (Part of an entirety) 6' x 10', electric drive 157A 2 Strand Transfer Deck (Part of an entirety) 6' x 18', electric drive 157B Baker Resaw Entirety of Lots 155 to 157A With 10% raise 158 2003 Gardner Denver Air Compressor Model: EAM99C, SN: S162685, 70 hp electric motor 159 Ingersoll Rand Air Compressor Compressor model: 7100, SN: 9053360, tank mounted, 15 hp electric motor, plug in ready, 120 gallon tank, 160 Morbark Chip Pak Model: 58, SN 862, 6' x 6' shaker screen, 6 knives, this unit had an easy life of chipping scraps off of the picket fence line. Good unit! 160A Lincoln Electric Motor 100 hp, 1785 rpm, 405T frame, includes soft start, electric cut out 161 Concave Belt Conveyor 36" x 106', 24" belt, catwalk along side 162 Sullair 110E S-Energy SN: 201008240041, Model: 1109E/A, plug in ready, hours unknown 163 Classifier Chip Sorter 54" x 100", electric drive 164 Paddle Chain Conveyor 19" x 28', 13 1/2" pan, 12 1/2" paddles, electric drive 165 Ash Auger 28" x 12', 9" auger, firebrick lined, electric drive 166 Mellott Vibrating Conveyor 34 1/2" x 10' section with screen, 8" sides, chipper adapter chute, 34 1/2" x 26' with drive unit, 5' fiberglass section, 24" pan 167 Belt Conveyor 12" pan x 25', electric drive 168 Chain Conveyor 24" pan x 70', 14" sides, 11" ladderback chain, in 2 sections, electric drive 169 Auger Conveyor 21" x 22', 14" auger, electric drive 170 Ash Box 44" x 67" x 57", ash transport box, 2 pieces 171 Mellott Vibrating Conveyor 36" pan, (2) 10' with drive unit no power, 10" sides, (1) 10' with 8" sides, (1) 5' with 10" sides, (1) 5' fiberglass section 10" sides 172 Chain Conveyor 19" x 32', 11" ladderback chain, electric drive 173 Belt Conveyor 24" pan x 15', electric drive 174 Auger Conveyor 25" x 35', 17" auger, electric drive 175 Paddle Conveyor 14" pan x 27', 3" x 13" paddles, no motor 176 Mellott Vibrating Conveyor 25" x 52', 19" pan, 4" sides, screen section, drive unit, no motor 176A Vibrating Conveyor 25" x 40', 19" pan, 4" sides and slide plan, drive unit, no motor 177 Precision Vibrating Conveyor Model: 15FT, SN: V2361, 31" x 15', 18" pan, 9" sides, 5' fiberglass section with metal detector, no controls, drive unit with electric motor, chipper adapter 178 Belt Conveyor 30" pan x 32', 29" belt, no drive 178A Roller 4' x 6' deck, 12" roller, ball hitch 178B Pipe Fittings and Rolls Steel 5" pipe fittings, (16) 6" x 54" rolls, 1 3/16" hub 178C Skate Rolls and Guard Fence Expandable skate rolls 2 sections, Versa-Guard expandable fence 179 2006 Slant Wood Fired Boiler Model: U1X0750-32006, SN: P6373-00, 15 PSI operating pressure, 25 125 BTU complete system, includes all the electrical inside the building including the electrical control room and the 400 AMP main, all conveyors and support equipment, walking floor sawdust holding area with 2 hydraulic packs, augers and conveyors, no pipe outside of building. Last inspection expired in 2017 (when they shut the kiln (lot 181) down) 180 Building That Holds Boiler 50' x 70' steel frame, 30' sides, insulated 181 Dry Kiln Building SELLS AFTER LOT 182 - 60' x 90' aluminum building, includes steel rail in concrete, 8 rails approx. 300' each, radiators and pipe inside building, shut down approx. 2017 182 Dry Kiln Building This kiln was in full production till the plant closed in the fall of 2022, 50' x 90' aluminum building, all fans and radiators inside 182A Meters and Controls for Kiln All electric in room, SII PC7485 controllers 182B Schneider AC Drive SN: 881048000043, Model: 250H460VACDR, 250 hp, 460 V 183 1994 Hurst Natural Gas Boiler Model: S4-G-600-15, SN: 2521, 1400000 BTU., last inspection expired in November of 2022, was working well when shut down, all support equipment in boiler room 184 Steel Supports, Stairs, and Catwalk Steel posts that support control room, (outside kiln) contents of control room 185 Filters Wix and Napa Oil and air filters, all filters on table 186 MDI XR3000 Metal Detector Model: XR-36-S, SN: XRS-11285, 24" x 48" under conveyor metal detector, control box model: CR-85 3000, SN: EV11039 187 MDI XR3000 Metal Detector Control box not complete, 24" x 36" under conveyor metal detector 188 MDI Metal Detector Control box, 16" x 32" under conveyor metal detector 189 Steel Structure Frame (outside sorter building) 18' x 45' x 18' tall, 6" x 8" I beams 190 Belt Conveyor 30" x 28', electric drive 191 Concave Belt Conveyor 42" x 70', 30" belt, so support legs, electric drive 192 West Plains Resaw 1" x 36" wheels, 1 1/4" band, electric control box, electric motor on head, chain feed web electric drive, no support structure, electric control box 193 Concave Belt Conveyor 41" x 50', catwalk and stairs, electric drive 194 Belt Conveyor 42" x 20', legs to ground, electric drive 197 Gardner Denver Air Compressor New in 2019 with less then 2 years of run time! Model: VSI225-260A, SN: S562325, (2) 127 kw electric motors, variable frequency drive compressor, very energy efficient. - Located at: 6251 Gerwoude DR McBain MI (14 miles from the auction site) 195 198 Gardner Denver Air Compressor 48" blower, 20 hp electric motor - Located at: 6251 Gerwoude DR McBain MI (14 miles from the auction site) 196 198A Stringer Chipper Model: 600SS, SN: 0055, 8 knives, brake on pulley - Located at: 6251 Gerwoude DR McBain MI (14 miles from the auction site) 197 198B World Energy Electric Motor 250 hp, 1185 rpm, N587U7 frame - Located at: 6251 Gerwoude DR McBain MI (14 miles from the auction site) 199 Chip Shaker Screen 8'6" x 15', electric drive - Located at: 6251 Gerwoude DR McBain MI (14 miles from the auction site) 200 Cyclone 9' x 15', includes frame and catwalk, 24" inlet - Located at: 6251 Gerwoude DR McBain MI (14 miles from the auction site) 201 Precision Vibrating Conveyor 36" x 23', 5' fiberglass section, screen section, 24" pan, 12" sides, I beam frame, electric drive - Located at: 6251 Gerwoude DR McBain MI (14 miles from the auction site) 202 Kim Wood Hog 36" x 36" open top, bottom discharge - Located at: 6251 Gerwoude DR McBain MI (14 miles from the auction site) 202A World Energy Electric Motor 250 hp, 1185 rpm, N587UZ frame - Located at: 6251 Gerwoude DR McBain MI (14 miles from the auction site) 203 4 Strand Transfer Deck 11' x 17', electric drive - Located at: 6251 Gerwoude DR McBain MI (14 miles from the auction site) 204 2017 PHL 60” Bottom Discharge Chipper (Location Newton MS Plant) only in service from 2017 till 2022 when it was removed due to capacity. good unit! 205 60” Stringer Chipper Top Discharge (Location Prentice WI Plant) This chipper had an easy life of chipping scraps that came off the planer line. Still a good unit! 206 Claussen All Mark Lumber Grade Stamper (Location Prentice WI Plant) 207 MDI TWI-2000 Metal Detector for planer Never installed (Location Prentice WI Plant)

Close X

Gallery Images Loading, Please Wait...

Close X

Save this sale to your Saved Sales list!

Your Saved Sales list is an easy way to return to sale listings which are of interest to you.

Login

Username:

Password:

Sign Up

FREE EMAIL NOTIFICATIONS
auction listings delivered to your inbox

Close X

Sign Up

FREE EMAIL NOTIFICATIONS
auction listings delivered to your inbox

Login

Username:

Password:

Return

Late Model Sawmill Equipment - Lake City, MI

Live Auction

View Gallery (124)

Auction Date(s)

Thursday Sep 7, 2023 Completed

Auction Location

Lake City, MI 49651

View Map

Company

Bright Star Realty and Auctions, INC

Contact: Loren Beachy
Phone: 574-825-0704
Website: brightstarauctions.com

Listing Terms and Conditions

All equipment is being sold “AS-IS, WHERE- IS” with NO warranties expressed or implied.
All equipment must be paid for IN FULL before equipment removal.
All Equipment must be removed from Biewer Sawmill Lake City LLC. by no later than 12/01/2023
Entry to the property must be scheduled
Any doing any work on the property must complete the Biewer Sawmill Lake City LLC Contractor Training Program and adhere to the program 100%
Purchaser’s or Purchaser representative (including all sub-contractors) Certificate of Liability Insurance MUST BE PRESENT AT TIME OF RETRIEVAL OF PURCHASED EQUIPMENT AND INCLUDE:
- At least 1,000,000 General Liability Each Occurrence
- At least 2,000,000 General Liability General Aggregate
- At least 500,000 Work Comp & Employers Liability Coverage
All Rigging/loading will be the responsibility of the purchaser
Spark watch for hot work will be the responsibility of the purchaser and must comply with Biewer Hot Work Policy
Purchaser must utilize the Stored Entry Isolation & De-Energization Checklist prior to decommissioning any equipment in order to safely identify and resolve stored energy hazards
All buildings and equipment are to be returned to their original condition prior to leaving the property (ie: If necessary to remove a panel of wall or roof to obtain purchased equipment, the purchaser must return the panel to its original location and fastened in its original fashion)
Floors must be left clean and free from debris and fasteners must be flush with the floor, any concrete damaged during equipment retrieval must be repaired prior to leaving the property.
All trash removal will be at the expense of the purchaser

Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded where required.
Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer:

Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.
Governing Law.
1. For Auctions in the State of Indiana and Online. Unless otherwise indicated, all Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are deemed to be entered into in the State of Indiana, all bids and payments are deemed to be received in the State of Indiana, and the contract, if any, will be deemed to be formed and entered into in the State of Indiana.
Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.
Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
Nature of the Auction. This Property is being sold at the Auction in the manner indicated on the first page of this Agreement.
Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
2. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
3. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
4. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
5. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
6. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
7. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
8. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.
9. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties, (i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
10. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
11. No Reduction or Retraction of Online Bids. Online bids may not be reduced or retracted.
12. Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.

1. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.
Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). All prebids and maxbids placed online are considered absentee bids. Auctioneer pledges complete integrity in the treatment of absentee bids and absentee bids may be initiated and advanced in accordance with Auctioneer’s policies and procedures. Auctioneer has the right to initiate any absentee bids at 25% to 50% of their maximum amount. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot of Personal Property will be the Buyer of such Property.
All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.

Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or representation by Auctioneer.
Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ringman, or multiple bid assistants or ringmen, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked-Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases are due upon receipt of your invoice. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. If onsite bidders wish to send a wire, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.
Wire Transfer Payments. Buyer shall obtain verbal verification of all bank account information from Bright Star Auctions prior to initiating transfer. Except as otherwise provided by law, we shall not be liable for any loss or damage due to misplaced, unauthorized or fraudulent fund transfers.
ACH/eCheck Payments. By providing account information to Bright Star Auctions, buyer gives permission for Bright Star Auctions to retain payment information on file and represents they are the authorized account holder. Upon authorization to collect payment from Buyers account and prior to transfer, Buyer is responsible to notify their financial institution of the impending transaction. Buyer agrees to notify Bright Star Auctions of any changes in account information.
Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.

No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Tools, packing material, and/or assistance will not be supplied at Pickup, so Buyer must plan accordingly. Disassembly and removal shall be done in a quiet and workmanlike manner, and each Buyer, in making its bid, shall thereby indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer’s employees, agents, representatives, or independent contractors in connection with the Pickup. Any and all damages to the Pickup site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller. Each Buyer must show a copy of the invoice (digital or hard copy) and government-issued photo identification before Lots will be released. No Buyer shall bring pets or young children to the Pickup, as the movement of Lots presents an extremely high-risk environment that could result in injury or death.
Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them. In addition, Buyer’s bidding privileges may be suspended at future auctions.
Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.
Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled to specific performance or other equitable relief.
Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim or suit relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their rights.

Preview Information
Day prior or by appointment
Location of auction: 1560 W Houghton Lake RD, Lake City, MI 49651

Heavy Equipment Key Set 36 Keys
Shipping available for $20

Manual Sealless Steel Strapping Tool
Model A333, works for 1/2" 5/8" or 3/4" banding, new in box. Shipping available for $30

100

2002 Ski-Doo Bombardier
Model: Tundra R, VIN: 2BPS327892V002112, needs new start switch, condition unknown

101

Hydraulic Shop Press
52" x 8', heavy duty, 4 1/2" bore, 20" stroke, cage enclosure, hydraulic pak

101

Ingersoll Rand Air Compressor*
Model: TS4N5, SN: 60053900, electric drive, mounted on 80 gallon tank.

120

Belt Conveyor
24' x 22', 18" belt, no support frame, electric drive

121

Belt Conveyor
22" x 30', 18" belt, 20" pan, 12" sides, electric drive

122

Belt Conveyor
17" x 22', 14" belt, 8" sides, electric drive

123

Mellott Bark Conveyor
New in 2002, 26" x 58', elevated, electric drive, 23" pan, 13" sides, 6 1/2" x 22" paddles

124

Comact 5 Strand Log Deck
New in 2002, 18' x 42' legs to ground, front legs to support beam, one strand has no chain, electric drive

125

Comact Wave Log Feeder
New in 2002, 18' x 10' x 10' tall, electric powered centrifugal drive, no support structure

126

Belt Log Conveyor
(1st of an entirety) New in 2002, 18" x 28', infeed to debarker, hourglass lift roll on end, leg support to first beam, no catwalk

127

127A

Operator Cab with Controls
(Part of an entirety) 8'8" x 10' x 8" high, all controls in cab except MDI control box, has heat and AC, no electrical under cab

128

129

Belt Conveyor with Log Kickers
(Part of an entirety) New in 2002, 35" x 83', 18" belt, 18" sides, 2 kicker sections with air cylinders, legs to first beam only

128A

Nickleson Ring Debarker Entirety of Lots 126 to 128
With 10% raise. Also is included in a master entirety

129A

Slide Pan with Log Catcher
(Part of an entirety) New in 2002, 18' x 13' slide pan, 7' x 8' landing deck, 6' x 8' landing deck, support legs to ground

129B

129C

129D

Hydraulic Pak
(Part of an entirety) New in 2002, 2 hp electric with control valve

129E

Entirety of Lots 126-129D
With 10% raise. Included in the master entirety

130

Comact 4 Strand Log Deck
New in 2002, 14' x 40', camelback chain, electric drive, support to ground

131

Balanced Vibrating Conveyor
New in 2002, 45" x 96', 24" pan, 13" sides, electric drive, bottom frame is in concrete

132

Comact 5 Strand Log Deck
New in 2002, 18' x 45', 38" high sides, 4' x 8' slide pan, log stop on end, one strand has no chain, electric drive, catwalk overdeck only

132A

Steel Support Structure Under Debarker
New in 2002, Side guards, slide pans, steel posts, catwalk and stairs around debarker and decks, all support not lotted with equipment

133

Mill Power Vibrating Conveyor
New in 2002, SN: 92401, 36" x 66', 10" sides, 18" pan, fiberglass section with MDI metal detector, no controls, chipper infeed chute, electric drive

132B

Debarker Master Entirety of Lots 123 to 132A
With 10% raise.

134

Progress 60" Wood Chipper
New in 2002, SN: 000103, bottom discharge, 6 knives, no power

134A

XE 150hp Electric Motor
New in 2002, 1785 rpm, 445T frame

135

7 Strand Landing Deck
FIRST LOT OF ENTIRETY New in 2002, 13' x 13', rooftop chain, steel decking, legs to first beam, electric drive

136

5 Strand Transfer Deck
Part of entirety - New in 2002, 12'10" x 21', no support past first beam, electric drive

137

Comact 8 Strand Unscrambler
Part of entirety - New in 2002, 18' wide x 12' x 11' tall, 4 bar with waterfall, electric drive

137A

Support Structure Under Decks and Unscrambler
Part of entirety - New in 2002

137B

Comact PLC Control Center
New in 2002

138

Screw Rolls and Accumulation Deck
Part of entirety New in 2002, Deck to board loader, to optimizer, to even ender rolls, 16' x 32' section

139

140

Paddle Fence
(Part of an entirety) New in 2002, 16' wide x 20' long chain, no sprockets on one end

141

2002 Comact Hi-Tech Trimsaw
(Part of an entirety) New in 2002, 7'6" x 22', 7 saw setup, feed through chains, 18' capacity, 2 waste conveyors

141A

141B

Optimizing Trimsaw Line Entirety of Lots 135 to 141
With 10% raise. subject to master entirety (lot 146C)

142

142A

4 Strand Transfer Chain
(Part of an entirety) New in 2002, Under sorter, 10' x approx. 150' long, can be split in 2 sections, electric drive

143

Hi-Tech Comact Transfer Deck
(Part of an entirety) New in 2002, 12' 6" x 21', incline to unscrambler, electric drive

144

Comact Unscrambler
(Part of an entirety) New in 2002, 20' wide x 12' x 10' tall, electric drive

145

Automatic Lumber Stacker
(Part of an entirety) New in 2002, 16' wide, screw rolls for even ender, pack hoist and out feed rolls, 9" x 100" rolls, Batton in feed chains

145A

3 Strand Transfer Deck
(Part of an entirety) New in 2002, 6' x 40', support steel to ground, electric drive

146

Package Deck Outfeed
(Part of an entirety) New in 2002, 11' x 36' transfer deck with popup chains, outfeed roll case 10' x 30', 9" x 100" rolls, electric drive

146A

146B

Comact Auto Stacker Entirety of Lots 142 to 146
With 10% raise. subject to master entirety (lot 146C)

146C

Master Entirety of Lots 135-146B
With 10% raise

150

Atlas Copco Air Compressor
New in 2002, Model: GA110, SN: 8972931639, 150 hp electric drive, includes duct work on top

146B

Steel Building Over Sorter
(Part of an entirety) 40' x 320', one sided roof, high side wall 42', (3) man doors, (2) 10' x 10' overhead doors, (1) 20' x 20' overhead doors

146C

Omega II Radiant Heaters
(Part of an entirety) 8 pieces, 50' long each, Nat gas

150A

Hankinson Air Dryer
New in 2002, Model: HHL-460, SN: H1743080001002-1, 110 V controls, 44" x 44" x 7' tall

151

Gardner Denver Air Dryer
SELLS AFTER LOT 152 - New in 2002, Model: DHG930, SN: 1000002842656, 110 controls, overall 9'6" high x 55" x 55"

146D

Comact Sorter and Stacker Master Entirety of Lots 143 to 146C
With 10% raise. Optimizer, trimsaw, 34 bin sorter, stacker

152

Gardner Denver Air Compressor and Cooler
New in 2002, 125 hp compressor, model: ECQQNA, SN: M04672, Date: 8/1984, meter reads: 39156, disconnect box, air cooler radiator

152A

Schneider Electric Soft Start
New in 2002, Model: ATS48C17Y

153

Chip Holding Bin
New in 2002, Base 16' x 56' holds approx. 350 cu.yd., 3 drawer dump with hydraulic controls, bucket elevator 24' x 56" x 65' tall

155

156

4 Strand Transfer Deck
(Part of an entirety) 6' x 17', electric drive

157

4 Strand Transfer Deck
(Part of an entirety) 6' x 10', electric drive

157A

2 Strand Transfer Deck
(Part of an entirety) 6' x 18', electric drive

157B

Baker Resaw Entirety of Lots 155 to 157A
With 10% raise

158

2003 Gardner Denver Air Compressor
Model: EAM99C, SN: S162685, 70 hp electric motor

159

Ingersoll Rand Air Compressor
Compressor model: 7100, SN: 9053360, tank mounted, 15 hp electric motor, plug in ready, 120 gallon tank,

160

Morbark Chip Pak
Model: 58, SN 862, 6' x 6' shaker screen, 6 knives, this unit had an easy life of chipping scraps off of the picket fence line. Good unit!

160A

Lincoln Electric Motor
100 hp, 1785 rpm, 405T frame, includes soft start, electric cut out

161

Concave Belt Conveyor
36" x 106', 24" belt, catwalk along side

162

Sullair 110E S-Energy
SN: 201008240041, Model: 1109E/A, plug in ready, hours unknown

163

Classifier Chip Sorter
54" x 100", electric drive

164

Paddle Chain Conveyor
19" x 28', 13 1/2" pan, 12 1/2" paddles, electric drive

165

Ash Auger
28" x 12', 9" auger, firebrick lined, electric drive

166

Mellott Vibrating Conveyor
34 1/2" x 10' section with screen, 8" sides, chipper adapter chute, 34 1/2" x 26' with drive unit, 5' fiberglass section, 24" pan

167

Belt Conveyor
12" pan x 25', electric drive

168

Chain Conveyor
24" pan x 70', 14" sides, 11" ladderback chain, in 2 sections, electric drive

169

Auger Conveyor
21" x 22', 14" auger, electric drive

170

Ash Box
44" x 67" x 57", ash transport box, 2 pieces

171

Mellott Vibrating Conveyor
36" pan, (2) 10' with drive unit no power, 10" sides, (1) 10' with 8" sides, (1) 5' with 10" sides, (1) 5' fiberglass section 10" sides

172

Chain Conveyor
19" x 32', 11" ladderback chain, electric drive

173

Belt Conveyor
24" pan x 15', electric drive

174

Auger Conveyor
25" x 35', 17" auger, electric drive

175

Paddle Conveyor
14" pan x 27', 3" x 13" paddles, no motor

176

Mellott Vibrating Conveyor
25" x 52', 19" pan, 4" sides, screen section, drive unit, no motor

176A

Vibrating Conveyor
25" x 40', 19" pan, 4" sides and slide plan, drive unit, no motor

177

Precision Vibrating Conveyor
Model: 15FT, SN: V2361, 31" x 15', 18" pan, 9" sides, 5' fiberglass section with metal detector, no controls, drive unit with electric motor, chipper adapter

178

Belt Conveyor
30" pan x 32', 29" belt, no drive

178A

Roller
4' x 6' deck, 12" roller, ball hitch

178B

Pipe Fittings and Rolls
Steel 5" pipe fittings, (16) 6" x 54" rolls, 1 3/16" hub

178C

Skate Rolls and Guard Fence
Expandable skate rolls 2 sections, Versa-Guard expandable fence

179

180

Building That Holds Boiler
50' x 70' steel frame, 30' sides, insulated

181

Dry Kiln Building
SELLS AFTER LOT 182 - 60' x 90' aluminum building, includes steel rail in concrete, 8 rails approx. 300' each, radiators and pipe inside building, shut down approx. 2017

182

Dry Kiln Building
This kiln was in full production till the plant closed in the fall of 2022, 50' x 90' aluminum building, all fans and radiators inside

182A

Meters and Controls for Kiln
All electric in room, SII PC7485 controllers

182B

Schneider AC Drive
SN: 881048000043, Model: 250H460VACDR, 250 hp, 460 V

183

1994 Hurst Natural Gas Boiler
Model: S4-G-600-15, SN: 2521, 1400000 BTU., last inspection expired in November of 2022, was working well when shut down, all support equipment in boiler room

184

Steel Supports, Stairs, and Catwalk
Steel posts that support control room, (outside kiln) contents of control room

185

Filters Wix and Napa
Oil and air filters, all filters on table

186

MDI XR3000 Metal Detector
Model: XR-36-S, SN: XRS-11285, 24" x 48" under conveyor metal detector, control box model: CR-85 3000, SN: EV11039

187

MDI XR3000 Metal Detector
Control box not complete, 24" x 36" under conveyor metal detector

188

MDI Metal Detector
Control box, 16" x 32" under conveyor metal detector

189

Steel Structure Frame
(outside sorter building) 18' x 45' x 18' tall, 6" x 8" I beams

190

Belt Conveyor
30" x 28', electric drive

191

Concave Belt Conveyor
42" x 70', 30" belt, so support legs, electric drive

192

West Plains Resaw
1" x 36" wheels, 1 1/4" band, electric control box, electric motor on head, chain feed web electric drive, no support structure, electric control box

193

Concave Belt Conveyor
41" x 50', catwalk and stairs, electric drive

194

Belt Conveyor
42" x 20', legs to ground, electric drive

197

195

198

Gardner Denver Air Compressor
48" blower, 20 hp electric motor - Located at: 6251 Gerwoude DR McBain MI (14 miles from the auction site)

196

198A

Stringer Chipper
Model: 600SS, SN: 0055, 8 knives, brake on pulley - Located at: 6251 Gerwoude DR McBain MI (14 miles from the auction site)

197

198B

World Energy Electric Motor
250 hp, 1185 rpm, N587U7 frame - Located at: 6251 Gerwoude DR McBain MI (14 miles from the auction site)

199

Chip Shaker Screen
8'6" x 15', electric drive - Located at: 6251 Gerwoude DR McBain MI (14 miles from the auction site)

200

Cyclone
9' x 15', includes frame and catwalk, 24" inlet - Located at: 6251 Gerwoude DR McBain MI (14 miles from the auction site)

201

202

Kim Wood Hog
36" x 36" open top, bottom discharge - Located at: 6251 Gerwoude DR McBain MI (14 miles from the auction site)

202A

World Energy Electric Motor
250 hp, 1185 rpm, N587UZ frame - Located at: 6251 Gerwoude DR McBain MI (14 miles from the auction site)

203

4 Strand Transfer Deck
11' x 17', electric drive - Located at: 6251 Gerwoude DR McBain MI (14 miles from the auction site)

204

2017 PHL 60” Bottom Discharge Chipper
(Location Newton MS Plant) only in service from 2017 till 2022 when it was removed due to capacity. good unit!

205

60” Stringer Chipper Top Discharge
(Location Prentice WI Plant) This chipper had an easy life of chipping scraps that came off the planer line. Still a good unit!

206

Claussen All Mark Lumber Grade Stamper
(Location Prentice WI Plant)

207

MDI TWI-2000 Metal Detector for planer
Never installed (Location Prentice WI Plant)

Late Model Sawmill Equipment - Lake City, MIPrevious Page Listing ID#: 1534992

Free Email Notifications

Share This Listing

Other Sales byThis Company

Sponsored Links

Late Model Sawmill Equipment - Lake City, MI

Login

Sign Up

Sign Up

Login

Late Model Sawmill Equipment - Lake City, MI
Previous Page Listing ID#: 1534992

Other Sales by
This Company