THIS IS A COMPLETED SALE
View current listings by this company

Schrock Woodworking
Previous Page Listing ID#: 1525794

Auction Location
Mays Lick, KY 41055

Auction Dates and TimesSALE IS COMPLETED
Saturday Aug 5, 2023 Completed

Auction Type
Live Auction

Company Information
Bright Star Realty and Auctions, INC Contact: Loren Beachy Phone: 574-825-0704 Email: beachyauctions@gmail.com Website: brightstarauctions.com GoToAuction.com ID#: 5286 View company information and listings

Free Email Notifications

Sign up for the GoToAuction.com email notifications and we will let you know about sales in your area! You may set up alerts by area (zip and radius), keywords, and by company. It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions
Bidder Terms and Conditions There is a 13% online buyer’s premium in effect for all purchases made online. Buyer’s premium is 10% for onsite bidders. All items sell where is as is with no warranties or guarantees. Buyer is responsible to inspect all merchandise prior to placing bids. Payment terms: Cash, check, wire transfer. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice. Onsite buyers, payment is due the day of the auction. If onsite bidders wish to send a wire and still be assessed only the onsite buyer’s premium, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. All items are pick-up only. Smalls must be removed within 2 days. All items must be removed within 30 days unless otherwise noted. Loadout available day of auction, after that by appointment. Please call agent for more info. Buyer shall assume responsibility of all property when auctioneer says sold. Auction company is not responsible for any missing or stolen items. These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer. Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms. Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded where required. Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer: “Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction. “Absentee Bidder” means a person or entity that submits an Absentee Bid. “Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION. “Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids. “Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected. “Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder. “Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms. “Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer. "Buyer" means the Winning Bidder with respect to each Lot of Personal Property. "Buyer's Premium" is an amount with respect to each Lot of Personal Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account. “Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation. “Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer. “High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot. “High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on the Lot put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price. “High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot. "Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event. “Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer. “No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale. “Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions. “Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online. "Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered. “Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers. “Personal Property” means all tangible and moveable property, including fixtures, designated as Property. “Pick-up” means the act of picking up or removing sold Lots by respective Winning Bidders at the date(s), time(s), and location indicated for such during the Auction or as later agreed to by Seller and Buyer. “Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer). “Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms-length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction. “Property” means the Real Property and the Personal Property. “Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium. "Registered Bidder" means a person or entity that has registered to bid at the Auction. “Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction. “Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE. “Reserve Price” means the minimum price that Seller is willing to accept for specific Property. “Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer. “Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid. “Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by Seller). "Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid. “Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction. Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration. Governing Law. For Auctions in the State of Indiana and Online. Unless otherwise indicated, all Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are deemed to be entered into in the State of Indiana, all bids and payments are deemed to be received in the State of Indiana, and the contract, if any, will be deemed to be formed and entered into in the State of Indiana. Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium. Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion. Nature of the Auction. This Property is being sold at the Auction in the manner indicated on the first page of this Agreement. Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms. No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer. Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online: Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties, (i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer. No Reduction or Retraction of Online Bids. Online bids may not be reduced or retracted. Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification. Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). All prebids and maxbids placed online are considered absentee bids. Auctioneer pledges complete integrity in the treatment of absentee bids and absentee bids may be initiated and advanced in accordance with Auctioneer’s policies and procedures. Auctioneer has the right to initiate any absentee bids at 25% to 50% of their maximum amount. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder. Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion. Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder. Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction. Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot of Personal Property will be the Buyer of such Property. All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING. Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings. Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property. Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or representation by Auctioneer. Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller. Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction. Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ringman, or multiple bid assistants or ringmen, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid. Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer. All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS. Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked-Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made. Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases are due upon receipt of your invoice. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. If onsite bidders wish to send a wire, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion. Wire Transfer Payments. Buyer shall obtain verbal verification of all bank account information from Bright Star Auctions prior to initiating transfer. Except as otherwise provided by law, we shall not be liable for any loss or damage due to misplaced, unauthorized or fraudulent fund transfers. ACH/eCheck Payments. By providing account information to Bright Star Auctions, buyer gives permission for Bright Star Auctions to retain payment information on file and represents they are the authorized account holder. Upon authorization to collect payment from Buyers account and prior to transfer, Buyer is responsible to notify their financial institution of the impending transaction. Buyer agrees to notify Bright Star Auctions of any changes in account information. Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid. No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number. Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Tools, packing material, and/or assistance will not be supplied at Pickup, so Buyer must plan accordingly. Disassembly and removal shall be done in a quiet and workmanlike manner, and each Buyer, in making its bid, shall thereby indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer’s employees, agents, representatives, or independent contractors in connection with the Pickup. Any and all damages to the Pickup site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller. Each Buyer must show a copy of the invoice (digital or hard copy) and government-issued photo identification before Lots will be released. No Buyer shall bring pets or young children to the Pickup, as the movement of Lots presents an extremely high-risk environment that could result in injury or death. Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them. In addition, Buyer’s bidding privileges may be suspended at future auctions. Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer. Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession. Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled to specific performance or other equitable relief. Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages. Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property. Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium. Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller. Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site. Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim or suit relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial. Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their rights.

Listing Terms and Conditions

Bidder Terms and Conditions
There is a 13% online buyer’s premium in effect for all purchases made online. Buyer’s premium is 10% for onsite bidders. All items sell where is as is with no warranties or guarantees. Buyer is responsible to inspect all merchandise prior to placing bids. Payment terms: Cash, check, wire transfer. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice. Onsite buyers, payment is due the day of the auction. If onsite bidders wish to send a wire and still be assessed only the onsite buyer’s premium, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. All items are pick-up only. Smalls must be removed within 2 days. All items must be removed within 30 days unless otherwise noted. Loadout available day of auction, after that by appointment. Please call agent for more info. Buyer shall assume responsibility of all property when auctioneer says sold. Auction company is not responsible for any missing or stolen items.
These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer.

Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded where required.
Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer:

“Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction.
“Absentee Bidder” means a person or entity that submits an Absentee Bid.
“Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION.
“Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids.
“Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected.
“Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder.
“Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms.
“Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer.
"Buyer" means the Winning Bidder with respect to each Lot of Personal Property.
"Buyer's Premium" is an amount with respect to each Lot of Personal Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account.
“Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation.
“Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer.
“High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot.
“High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on the Lot put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price.
“High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot.
"Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event.
“Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer.
“No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale.
“Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions.
“Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online.
"Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered.
“Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers.
“Personal Property” means all tangible and moveable property, including fixtures, designated as Property.
“Pick-up” means the act of picking up or removing sold Lots by respective Winning Bidders at the date(s), time(s), and location indicated for such during the Auction or as later agreed to by Seller and Buyer.
“Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer).
“Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms-length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction.
“Property” means the Real Property and the Personal Property.
“Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium.
"Registered Bidder" means a person or entity that has registered to bid at the Auction.
“Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction.
“Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE.
“Reserve Price” means the minimum price that Seller is willing to accept for specific Property.
“Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer.
“Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid.
“Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by Seller).
"Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid.
“Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction.

Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.
Governing Law.
1. For Auctions in the State of Indiana and Online. Unless otherwise indicated, all Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are deemed to be entered into in the State of Indiana, all bids and payments are deemed to be received in the State of Indiana, and the contract, if any, will be deemed to be formed and entered into in the State of Indiana.
Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.
Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
Nature of the Auction. This Property is being sold at the Auction in the manner indicated on the first page of this Agreement.
Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
2. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
3. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
4. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
5. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
6. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
7. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
8. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.
9. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties, (i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
10. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
11. No Reduction or Retraction of Online Bids. Online bids may not be reduced or retracted.
12. Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.

1. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.
Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). All prebids and maxbids placed online are considered absentee bids. Auctioneer pledges complete integrity in the treatment of absentee bids and absentee bids may be initiated and advanced in accordance with Auctioneer’s policies and procedures. Auctioneer has the right to initiate any absentee bids at 25% to 50% of their maximum amount. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot of Personal Property will be the Buyer of such Property.
All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.

Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or representation by Auctioneer.
Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ringman, or multiple bid assistants or ringmen, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked-Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases are due upon receipt of your invoice. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. If onsite bidders wish to send a wire, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.
Wire Transfer Payments. Buyer shall obtain verbal verification of all bank account information from Bright Star Auctions prior to initiating transfer. Except as otherwise provided by law, we shall not be liable for any loss or damage due to misplaced, unauthorized or fraudulent fund transfers.
ACH/eCheck Payments. By providing account information to Bright Star Auctions, buyer gives permission for Bright Star Auctions to retain payment information on file and represents they are the authorized account holder. Upon authorization to collect payment from Buyers account and prior to transfer, Buyer is responsible to notify their financial institution of the impending transaction. Buyer agrees to notify Bright Star Auctions of any changes in account information.
Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.

No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Tools, packing material, and/or assistance will not be supplied at Pickup, so Buyer must plan accordingly. Disassembly and removal shall be done in a quiet and workmanlike manner, and each Buyer, in making its bid, shall thereby indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer’s employees, agents, representatives, or independent contractors in connection with the Pickup. Any and all damages to the Pickup site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller. Each Buyer must show a copy of the invoice (digital or hard copy) and government-issued photo identification before Lots will be released. No Buyer shall bring pets or young children to the Pickup, as the movement of Lots presents an extremely high-risk environment that could result in injury or death.
Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them. In addition, Buyer’s bidding privileges may be suspended at future auctions.
Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.
Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled to specific performance or other equitable relief.
Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim or suit relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their rights.

Listing Information
MR Schrock will be relocating and have made the decision to liquidate their quality business assets at public auction. Most of this equipment is turn key and ready to go to work for you! 00 Information Lot This is an absolute auction, meaning there are no minimums, no reserves, and no seller bidding. The highest bidder will be the new owner! Auction Agent: Eugene Hochstetler 574-242-1100 Highlight Pieces: Skidders, Morgan Scragg mill, Power units, Newer resaws, Forklifts 01 Preview Information Day before or by appointment only. Contact Eugene 574-242-1100 Location of auction: 6173 Flat Fork Rd, Mays Lick, KY 41055 02 Loadout Information Date: 8/5 and 8/7-8/8 Time: 8 AM - 4 PM Contact Kevin Nisley 574-202-6154 03 Payment Information Payment terms: 6% Sales Tax. 10% Onsite Buyers Premium, 13% Buyers Online and Phone Premium. Cash, check, wire transfer. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice. Onsite buyers, payment is due the day of the auction. If onsite bidders wish to send a wire and still be assessed only the onsite buyer’s premium, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. 04 Bright Star Auctions Die-Cast Metal 1:64 Scale Truck Replica Have fun buying a high-quality, die-cast toy! All proceeds including buyer's premium will go to Feed My Starving Children (FMSC) which is a Christian nonprofit dedicated to seeing every child and person around the world healthy, nourished and whole in body and spirit. Bright Star will pay for standard shipping and handling to the 48 contiguous states for buyers of this lot. https://www.youtube.com/watch?v=jYATxeDmuzM&t=8s 05 CAT 972M Wheel Loader 1:50 Scale Replica- Die Cast Metal Have fun buying a high-quality, die-cast toy! All proceeds including buyer's premium will go to Feed My Starving Children (FMSC) which is a Christian nonprofit dedicated to seeing every child and person around the world healthy, nourished and whole in body and spirit. Bright Star will pay for standard shipping and handling to the 48 contiguous states for buyers of this lot. https://www.youtube.com/watch?v=jYATxeDmuzM&t=8s 87 Heavy Equipment Key Set 36 Keys Shipping available for $20 88 Manual Sealless Steel Strapping Tool Model A333, works for 1/2" 5/8" or 3/4" banding, new in box. Shipping available for $30 89 1/16 Scale Die Cast Metal Fordson Tractor New in box 90 1/16 Scale Die Cast Metal Farmall Cub Tractor New in box 91 1/16 Scale John Deere Die-Cast Metal 1934 Model New in box 92 Hand Crank 1 Quart Butter Churn 93 Hand Crank 3 Quart Butter Churn 94 Hand Crank 2 Quart Butter Churn 95 Hand Crank 2 Quart Butter Churn 96 Steel Toy Ladder Carriage 97 Steel Toy Circus Carriage 98 Cedar Tack and Harness Cabinet 38" x 8'8" x 7' tall, 2 saddle racks, 1 harness cabinet, feed bin in center, holds up to (12) 50 lb. bags of feed, overhead storage, has LED strips lights, powered by 20V battery convertor 99 Cedar Table and Chairs 4 chairs, 20" x 76" table, live slab tops with clear Epoxy finish 100 Morgan Band Scragg Mill 1 1/2" x 13'8" bands, fully hydraulic, 1" x 23 1/2" band wheels, 3" x 22' infeed, hydraulic controls, 5' x 42' overall, includes all catwalk under and around Scrag, does not include belt conveyors, hydraulic lines, or power unit 100A Bands for Scragg Approx. 50 brand new bands, 1 1/2" x 13'8" 101 Belt Conveyor Hydraulic drive, 24" belt, 9" sides, 29" x 22' 102 Belt Conveyor Hydraulic drive, 35" belt, 4' x 22' 103 2 Strand Log Deck with Stop'N'Load Hydraulic drive, hydraulic cylinder on loading arm, 6' x 22' 104 3 Strand Transfer Deck Hydraulic drive, C55B rooftop chain, 32" x 35'6" 105 John Deere Power Tech 6.8L Diesel Unit (1st of an entirety) Meter reads: 906 hours, 170 hp, Family # WJDXL06.8014, WPT clutch, Dodge Raptor E60 bearing, includes single phase generator, Murphy starter switch, uses small amount of oil, does not include hydraulic system or air compressor. Steel frame not included. 105A 56" x 16' Steel Frame 106 Air Compressor (Part of an entirety) Runs off lot # 105, Model: 41P0119, includes air tank, valves, and all lines to equipment 107 Hydraulic Unit (Part of an entirety) 31 x 70 x 36" tank, includes all valves, pumps, and hydraulic lines to and from tank to equipment, intake hose fittings leak slightly 108 Power Unit Entirety of Lots 105-107 With 10% raise. 109 500 Gallon Diesel Fuel Tank 46" x 75" long, includes fuel lines to engine 110 Zimmerman Bandmill 7' x 24', 31 hp Vanguard gas motor, meter reads 227 hours, 1 x 24" band wheels, 1 1/2" bands, 36" width capacity, in excellent condition, 15'6" long bands 111 Bands for Zimmerman Approx. 32 new blades, approx. 35 used blades, 1 1/2" x 15'6", 7/8" tooth spacing 112 Mitsubishi Power Unit by Georgetown Hydraulics 11.94L, Model: 6D24-TEC, 280 hp, 6 cylinder, control panel with ignition, meter reads 9780 hours, North Star single phase generator, John Deere Gearbox (model: Q593, SN: YZD593C187061), includes all hydraulic pumps, hydraulic valve station, includes all hydraulic lines from unit to equipment, 4' x 4' x 4' tank, 4' x 20' overall, includes all intake and exhaust pipe for engine, includes hydraulic cooling unit, only 2500 hours since complete rebuilt on engine 113 500 Gallon Diesel Fuel Tank 4' x 75" long, includes fuel lines to engine 114 175 Gallon Diesel Fuel Tank Includes stand, 27 x 44 x 60" long 115 500 Gallon Air Tank Includes all air lines to equipment and other tank 116 500 Gallon Air Tank No air line included 117 Weinig Profimat 23E Moulder 5 head (2-upright, 2-horizontal) 8 x 10 1/2" capacity, 1 1/2'' spindle, control panel, hydraulic drive, includes pumps, includes dust pipe from machine to main overhead pipe, lots of new parts, spindles, rollers, etc., comes with 2 vertical cutting heads, in good working condition 117A Tongue and Groove Moulder Heads 5 heads total, 1 1/2'' spindle, 2 spiral carbide, tooth heads, includes lots of new teeth 117B Moulder Heads 7 heads total, 1 1/2'' spindle, used for making 3 1/2" x 3 1/2" mailbox posts 117C Assorted Moulder Heads 9 heads total, 1 1/2'' spindle 117D Assorted Moulder Heads 9 heads total, 1 1/2'' spindle 117E Main Moulder Heads 1 1/2'' spindle, Main top and bottom cutting heads, spiral carbide tooth style, includes 2 boxes of new inserts 117F Assorted Moulder Heads 1 1/2'' spindle, 9 heads total 117G Moulder Parts Wrenches, spacers, belts 117H Moulder Heads and Blades 3 heads and lots of ripping blocks 117I Moulder Parts Lots of assorted parts 117J Moulder Parts Knives, profiles, gear wheels, new feed rolls 117K Moulder Parts Lots of knives and profiles 117L Storage Bench for Moulder Made to organize heads, spacers, saws, and knives. 32 x 38 x 60" tall 118 Metabo 12" Chop Saw 110 V plug in, 12" x 5' skate rolls, includes table 119 Kobalt 12" Chop Saw SN: 052665, 12" x 5' skate rolls, 110 V plug in, includes table 119A 12" DeWalt Chop Saw with Bench Converted to hydraulic power, 18" x 9' bench 120 DeWalt 12" Chop Saw SN: 263715, 110 V plug in, includes table 121 John Deere 6068 Diesel Unit (1st of an entirety) Model: 6068HF285, SN: PE6068L030075, 116-129 KW, includes all exhaust piping, radiator, batteries, and control stand. Includes clutch and gearbox, does not include hydraulic pumps or tank, includes 5' x 12' steel frame, includes compressor mounted to frame, compressor is not currently working, starts and runs good 122 Hydraulic Unit (Part of an entirety) Piggyback pump, hydraulic valve station, 24 x 54 x 48" tank, includes all hydraulic lines to equipment 123 Power Unit Entirety of Lots 121-122 With 10% raise. 124 Tru-Cut 2 Head Resaw with Return 1" x 28" band wheels, 7" x 18' return belt, 7" x 18' feed belt, fully hydraulic, good condition 125 Tru-Cut 2 Head Resaw 1 x 28" band wheels, fully hydraulic, 6" x 13' feed belt, 1 1/4" bands, includes all bands as pictured, some are sharpened 126 Cooks "Cat's Claw" Band Sharpener SN: 0115AUDB4, 110 V plug in, includes extra grinding wheel 127 Wood-Mizer BMT200/250 Band Tooth Setter 110 V plug in, includes control box, in good condition 128 Wood-Mizer Shop Series Band Sharpener 110 V plug in, condition unknown 129 John Deere 4045 Power Unit (1st of an entirety) Model: 4045TF275, SN: PE4045T352933, 82 KW, NACD clutch, control panel, meter reads 14690 hours, includes single phase North Star generator, radiator, includes all exhaust piping 130 Quincy 20hp Air Compressor (Part of an entirety) Includes air lines to tanks and equipment, does not include tanks, includes belts 131 Hydraulic Unit (Part of an entirety) 30 x 60 x 18" tank on stand, dual pumps, cooling unit, includes all hydraulic valves and lines to equipment 132 Power Unit Entirety of Lots 129-131 With 10% raise. 133 52" Dust Blower 24" inlet and outlet, hydraulic drive, uninstalled, in good condition 134 Dust Pipe System Includes all pipe as pictured, (6) 24" pipe, flex hose, elbows, fittings, adaptors, includes pipe installed on ceiling in moulder building 135 Sears Roebuck Table Saw Model: 113.299315, SN: 87302P2092, 10" blade, 27" x 44" table top, hydraulic drive 136 Craftsman Table Saw SN: R901300835, 10" blade, hydraulic drive, 27" x 44" table top 137 Delta Table Saw SN: 17E-061182-2017-21-CT, 10" blade, 110 V plug in, mounted on wheels, 27" x 40" table top 138 Whirlwind Upcut Saw SN: 1604194R, model: 1000R, air cylinder, 12" blade, foot control, no drive 139 Hitachi CB 75F Bandsaw Air powered, 5/8" x 111 1/4" bands, includes extra bands, 2 3/4" x 16" band wheels 140 2 Head Drill Press Air powered, shop built on wheels 141 Delta Drill Press SN: 014420W2080, hydraulic drive, mounted on cart dolly 142 Porter-Cable Drill Press SN: 098285, 110 V plug in, 12 speed 143 Skil 3320 Drill Press SN: 602, 110 V plug in, 10", mounted on wooden stand 144 Weaver Shaper 27" x 39" tabletop, hydraulic drive, 4" cutting head, includes box of parts and tools 150 Skate Rolls 12" x 10' on legs 151 Skate Rolls 18" x 10' 152 Skate Rolls 18" x 10' 153 Skate Rolls 18" x 10' 154 Skate Rolls 18" x 10' 155 Skate Rolls 90°, 12" wide, 52" inside to inside 156 Skate Rolls 18" x 10' 157 Skate Rolls 18" x 4', includes 17" x 3', section of rolls 158 Fros Tek Gas Freezer 15" x 3' x 2' deep storage 159 Mitsubishi 6D-22T Diesel Engine 280 hp at 1800 rpm, 680 cubic inches, needs to be rebuilt, includes clutch, needs to be rebuilt, clutch rebuilt parts included 160 Radiator 2" hose inlet, 27" x 32" x 6" deep 161 Taping Machine Air over 110 V power, 27" x 45" skate rolls, works good 162 Taping Machine Air over 110 V power, 20" x 35" skate rolls, works good 163 Taping Machine Air over 110 V power, parts machine, 29 x 42" rolls 164 Tape 48mm x 914m rolls, 6 rolls/box, 3 full boxes, works for lots 161-163 165 Aluminum Birdhouse Jig 166 Aluminum Birdhouse Jig Includes air lines and valves, staple gun 167 Aluminum Birdhouse Jig 12 x 41" skate roll section 168 Aluminum Birdhouse Jig 169 Aluminum Birdhouse Jig Air hoses and valves 170 Aluminum Birdhouse Jig (3) large drills, air lines and valves 171 Aluminum Birdhouse Jig Air lines and valves, (2) staple guns 172 Aluminum Birdhouse Jig Air lines and valves 172A Staple Guns and Fittings L-staplers, assorted fittings 172B Assorted Staple Guns Fit on aluminum jigs 172C Assorted Staple Guns Fit on aluminum jigs 172D Assorted Staple Guns Fit on aluminum jigs 172E Assorted Staple Guns Fit on aluminum jigs 173 Plastic Bird Feeder Tubes 3 1/2" x 12 1/2", 276 pieces 174 Plastic Bird Feeder Tubes 3 1/2" x 7 3/4", 414/box, 2 boxes, 828 pieces 175 Plastic Bird Feeder Tubes 3 1/2"x 7 3/4", 414/box, 2 full boxes, 108 pieces on top of boxes, 936 pieces total 176 Pallet of Shrink Wrap 18" x 70' rolls, 4 rolls/box, 9 boxes, 36 rolls 177 Pallet of Shrink Wrap 18" x 70' rolls, 4 rolls/box, 9 boxes, 36 rolls 178 Pallet of Shrink Wrap 18" x 70' rolls, 4 rolls/box, 9 boxes, 36 rolls 179 Birdhouses/Feeders 3 pieces 180 Birdhouses/Feeders 2 pieces 181 Birdhouses/Feeders 4 pieces 182 Birdhouses/Feeders 2 pieces 183 Birdhouses/Feeders 3 pieces 184 Birdhouse 1 piece 185 Birdhouses/Feeders 3 pieces 186 Birdhouses/Feeders 3 pieces 187 Birdhouses/Feeders 3 pieces 188 Birdhouses/Feeders 3 pieces 189 Birdhouses/Feeders 3 pieces 190 Birdhouses/Feeders 3 pieces 191 Pallet of Cedar Birdhouse Parts 192 Pallet of Cedar Birdhouse Parts 193 Pallet of Cedar Birdhouse Parts 194 Cedar Birdhouses/Feeders 3 pieces 195 Cedar Birdhouses/Feeders 4 pieces 196 Cedar Birdhouses/Feeders 6 pieces 197 Cedar Birdhouses/Feeders 6 pieces 198 Pallet of Cedar Birdhouse Parts 199 Pallet of Cedar Birdhouse Parts 199A Pallet of Cedar Birdhouse Parts 199B Pallet of Cedar Birdhouse Parts 199C Pallet of Cedar Birdhouse Parts 200 2 Yard Self Dumping Hopper With fork pockets 201 2 Yard Self Dumping Hopper With fork pockets 202 2 Yard Self Dumping Hopper With fork pockets 203 2 Yard Self Dumping Hopper With fork pockets 204 2 Yard Self Dumping Hopper With fork pockets 205 2 Yard Self Dumping Hopper With fork pockets 206 Jet Pallet Jack 6000 lb. capacity, SN: 2000128454, 6 x 48" forks, 27" wide 207 Scissor-Lift Pallet Jack 6 x 46" forks, 27" wide, approx. 5000 lb. capacity 208 Roughneck Pallet Jack 4400 lb. capacity, 6 x 48" forks, 26" wide 210 Lumber Cart 4' x 7' x 32" tall 211 Lumber Cart 42" x 54" x 3' tall 212 Lumber Cart 4' x 7' x 32" tall 11527 213 Lumber Cart 4' x 7' x 32" tall I2HSCKASR71C000040 214 Lumber Cart 44 x 44 x 32" tall 215 Lumber Cart 42 x 48 x 36" tall 216 Lumber Cart 4' x 4' x 3' tall 217 Lumber Cart 40" x 6' x 3' tall 218 Lumber Cart 44" x 7' x 32" tall 219 Lumber Cart 4' x 7' x 32" tall 220 Lumber Cart 4' x 7' x 32" tall 221 Lumber Cart 44" x 4' x 34" tall 222 Chop Saw* 20" blade, 20"x16' dead roll feed, No drive, Line shaft ready, Manual pull down 223 4 Cylinder Diesel Power Unit* Make and Model unknown, No clutch, Was running when last used 225 Stihl MS661C Chainsaw* 20" bar, includes extra bar, works good 226 Stihl MS661C Chainsaw* 20" bar, works good 227 Stihl MS661C Chainsaw* 20" bar, works good 228 Stihl MS500i Chainsaw* 20" bar, works good 229 Stihl MS500i Chainsaw* 20" bar, works good 230 Husquarna 390XP Chainsaw* 18" bar, works good 231 Husquarna 390XP Chainsaw* 18" bar, works good 232 Husquarna 390XP Chainsaw* 18" bar, works good 250 2014 Bobcat S750 Skid Steer SN: ATDZ13401 Meter reads: 2,359 hours Engine: Bobcat 3.4L turbo diesel-Tier 4 HP: 85 Fuel type: Diesel ROPS: Fully enclosed cab with heat, AC, and radio 2 Speed: Yes Highflow: Yes Lift capacity: 3,200 lb Attachments: No Features and Notes: Hand and foot controls, does not include tracks, or any attachments, 12-16.5 tires, runs and operates well 251 Bobcat Over-Wheel Skid Steer Tracks 15' wide, was used on lot # 250, on 12-16.5 tires, in good condition 252 Bobcat 80" Heavy Duty Bucket Standard quick attach, Part # 7272681 253 85" Brush Grapple Standard quick attach, 2 hose hydraulic hookup, in good condition 254 Over Tire Skid Steer Tracks 14" wide 254A Bobcat Skid Steer Tires with Rims* 2 tires, 10-16.5, 8 lug 255 Crown C-5 Forklift SN: 9A199730 Meter reads: 6,227 hours Engine: 4 cylinder Fuel type: LP Load capacity: 5,200 lb Stage mast: 3 stage Mast height: 86", 45" wide Side shift: Yes Fork positioner: No ROPS: Open cab Tire size: 28 x 9-15 on front, 6.5-10 on rear Tires: Solid Features and Notes: Machine weighs 10,700 lb, 5 x 48" forks, runs and operates good. 256 Toyota 8FGCU25 Forklift SN: 30729 Meter reads: 6,773 hours Engine: Toyota Fuel type: LP Load capacity: 4800 lb Stage mast: 3 stage Mast height: 82" tall x 38" wide Side shift: Yes Fork positioner: Yes ROPS: Open cab Tire size: 533/178-381 on front, 406/152-266.7 on rear Tires: Solid Features and Notes: 5 x 42" forks, runs and operates well 257 Toyota Forlift Model: 526FGCU30 SN: 60519 Meter reads: 10,826 hours Engine: Toyota Fuel type: LP Load capacity: 6,000 lb Stage mast: 2 stage Mast height: 86" Side shift: Yes Fork positioner: No ROPS: Open cab Tire size: 21 x 8 x 15 on front, 16 x 6 x 10.5 on rear Tires: Solid Features and Notes: 5 x 42" forks, runs and operates well. Engine does overheat after an hour of steady use. 260 John Deere 650G Dozer SN: T0650GH767318 Meter reads: 9,705 hours Engine: John Deere 4045 Fuel type: Diesel Blade: 104" 6 way ROPS: Open A/C: No Heater: No Features and Notes: 18" tracks, 4 speed Power Shift transmission, winch with 5/8" cable, good under carriage, runs and operates great. 265 John Deere 648G Grapple Skidder PIN: DW648GX558797, meter reads: 16,703 hours, fully enclosed cab, 8 speed power-shift transmission, 88" blade, winch with 3/4" cable, 10' max width grapple, 30.5R32 tires, includes tire chains for w tires, John Deere 6,068 diesel engine 266 1990 Timberjack 240A Cable Skidder SN: CT7299, 4 speed manual transmission, 6 cylinder Deutz diesel engine, 82" blade, 18.4-26 tires, in good condition, Gearmatic winch with 1/2" cable (SN: 11933431-W52040) 269 Skidder Tires and Rims 23.1-26, 12 lugs, fits on lot 266, 4 tires 270 Barko 275B TRK Knuckleboom SN: 21154 Meter reads: 876 hours Engine: John Deere 4045 Fuel type: Diesel Continuous Grapple: Yes Trailer: Pitts Delimber: No Bucksaw Hookups: Yes A/C: No Heater: No Features and Notes: Fires right up and runs, pilot joystick controls. 271 Bucksaw Direct drive, 48" bar, 52" x 12' log rack, in good condition 275 1994 Freightliner Log Truck VIN: 1FVXFDYB8RH482973 Meter reads: 693,435 miles Engine: Cummins N14 Transmission: 13 speed Eaton Fuller Log loader: Rotobec 80 Elite (SN: 10800100-030185) Suspension: Henrik Rubber Block GVWR: Approx. 66,000 lb Heat/AC: Yes Full lock in rears: Unknown Double frame: Yes Features and Notes: Has continuous grapple, starts and runs good, loader operates as it should, 88" x 88" log bunks, 22' long log rack, 11R24.5 tires on 2 rear axles, 385/65R22.5 tires on front. Driver door does not open, latch is busted, there is a blown hose on the loader grapple. Has title but will be a delay 276 2001 Navistar 9900iX Semi Truck VIN: 2HSCKASR71E000040 Meter reads: 586,514 miles Engine: CAT 6NZ less than 4,000 miles since rebuild Transmission: 13 speed Eaton Fuller GVWR: 52,000 lb Front axle rating: 12,000 lb. Rear axle rating: 20,000 lb Heat/AC: Yes Wet kit: No Features and Notes: 260" WB, 64" sleeper, 285/75R24.5 tires, runs and drives great. Fan clutch on engine is not working. Has a title but there will be a delay 280 2014 Pitts Log Trailer VIN: 5JYLT3629FP150172, GVWR: 80,000 lb., GAWR: 24,000 lb, 6 bunk, center point suspension, 11R24.5 tires, includes straps, 92" wide x 87" tall bunks, 38' long, good condition, has rack on front. Has a title but there will be a delay 281 1977 Nelson Lo-Boy Trailer SN: 3611, Model: WBT-30F, rated at 60000 lb, 8' x 21' main deck, 3' dovetail, 2' x 32" ramps, 38' long overall 282 Wells Cargo 10' Construction Trailer VIN: 1WC200D1411095084, 2" ball, 5 lug axle, ST205/75R15 tires, 14'6" long overall, ladder racks on both sides and top, lots of shelving inside, includes spare tire and contents of trailer. Has title 283 Flatbed Gooseneck Trailer* 7' x 18' main deck, 2' dovetail, 14" x 5' ramps, 28'6" long overall, ST235/80R16 tires, 8 lug axles, has wiring for trailer lights and brakes. No title, bill of sale only 296 Scag Walk Behind Mower* 48" deck, 14 hp Kohler engine, SN: 19160363, Model: SW48-14KH, good working mower 297 500 Gallon Diesel Fuel Tank 4' x 6' long 298 Log Bunks 1 piece, 8' x 8' x 5' tall, ready to bolt on 299 300 Gallon Diesel Fuel Tank on Skids 12 V Gasboy fuel pump, model: 620B-DSL 300 Emglo Air Compressor SN: 07269105, 8 hp Honda motor 301 Quincy 340 Air Compressor SN: 6132198, no drive, worked well when removed 302 Worthington Air Compressor SN: ED9803, Honda GX 270 motor, 2' x 64" tank, size 4 7/8 x 2 7/8 x 2 1/8 303 Hydraulic Unit Honda GX 270 gas motor, 15 x 21 x 5" tank, pump and valves 304 Hydraulic Unit 10 hp electric motor, 22 x 29 x 16" tank 305 Electric Motors and Gearboxes (2) 2 hp with gearboxes, (1) unknown hp with hydraulic pump 306 Electric Motors (2) 20 hp, (1) 3 hp with gearbox, electrical box and controls 307 Radiator Unit 40 x 48" 308 Radiator Unit 36" x 42" 309 Radiator Unit 34" x 42" 310 PAC Auto Strapping Machine Model: PSM1412-1C3A, 110 plug in, 3/8" poly banding 311 Banding Cart 1/2" poly banding, crimper and strapping tool included 312 Chop Saws (4) Hitachi saws, all selling as parts saws 313 Chop Saws (3) Kobalt saws selling for parts, DeWalt saw is hydraulic drive and works 314 Drill Propelled Tre stand 36" x 42" platform, designed for wheel chair to be driven onto platform and "climb" up the stand 315 Cart and Stands Cart with aluminum jig part fasteners and tape, 2 adjustable stands 316 2 Gas Jugs and Cant Hook (2) 5 gallon jugs, 60" cant hook 317 Milwaukee 10 1/4" Circle Saw SN: B49AD1828-00056, 110 V plug in, includes case 317A Northern Tool Pipe Threader SN: 002, 1/2"-2", 110 V plug in, works good 317B Horse Drawn Cultivator 5 tooth, single horse 317C Tinned Meat Mauler Powered by 3 1/2 hp Honda motor 317D Honda GX160 Motor 5 1/2 hp 317E School Desk and Chair 20 x 24", desktop 317F Hand Tools* 4" bench vise, hay hook, sledge hammer head, potato planter 318 Delta Dust Collector Converted to hydraulic drive, 10" blower, (4) 4" inlet pipe, 2 bag collector, on wheels 318A Banding 1/2" poly banding, 600 lb./box, 7 new boxes, 1/2" seals-1000/box, 6 boxes, includes crimper 318B Scaffolding (10) cross braces, 80" long, (12) 5' x 5' tall legs, planks not included 319 Sawblades and Belts Assorted motor belts, new and used 10-12" sawblades, new hydraulic pump 320 Work Bench and LP Cabinet 14 x 28 x 30" LP storage cabinet, 21 x 42 x 56" tall workbench 321 Box Fans (7) 18" box fans-110 plug in wiring, poly banding, hose clamps, jig parts 322 Pallet of Misc. Chainsaw safety clothing, toolbox, antique glass bottles, rubber counter weights 323 Pallet of Tools Corded DeWalt drills, air nailers, and staplers 324 Honda Motor and Magnet Rollers Motor size unknown 325 Pallet of Assorted Fasteners Pole barn spikes, framing nails, metal screws 326 Pallet of Tools 10" Kobalt chop saw, skill saws, Sawzall, bench grinder, Bosch hammer drill, Skil router table 327 Pallet of Assorted Fasteners Pole barn spikes, metal screws 328 Pallet of Assorted Fasteners Metal screws, 16D hand nails 329 Pallet of Assorted Fasteners Metal screws 330 Pallet of Assorted Fasteners Metal screws, pole barn spikes, 16D nails 331 Air Powered Drum Fan Mounted on wheels 332 2 Floor Fans Both 24" air powered 333 2 Floor Fans Both 24" air powered 334 Box Fan Air powered, 36" fan, 44 x 44" box 335 2 Floor Fans Air powered both 24" 336 12 V Light Stands (4) stands, have all wiring to run lights off 12 V batteries, 6' tall, mounted on wheels 337 Pallet of Fasteners Assorted staples 338 Pallet of Parts PVC fittings, jig parts, screws 339 Pallet of Misc. Mailbox, DeWalt tools 340 Pallet of Misc. Zip ties, parts, drill bits, grease gun 341 Pallet of Misc. DeWalt battery nail gun-needs work, done on driver, creeper, assorted staples, scales 342 Pallet of Misc. Air sanders, air lines, cylinders, bolts, chain, fittings 343 Pallet of Aluminum Jig Parts 344 Pallet of Clear Packing Tape 48mm x 50m rolls, 96 rolls/box, 8 full boxes 345 Bird Feeder Parts Feeder wire, tape 346 Assorted Rubber Floor Mats 347 Assorted Air Hose and 3 Chairs 348 Pallet of Misc. Small tool sets, parts 349 Pallet of Hand Tools Handsaws, milk jug, hedge trimmer, plow seats, battery weed-eater 350 Pallet of Hydraulic Parts 351 Pallet of Misc. Plow handles, large bird box, box of tape, assorted fasteners 352 2 Wall Heaters (1) gas, (1) electric 352A Pallet of Parts* Hose fittings, hydraulic fittings, hose clamps, (4) 10' sections of 6" flex hose, (1) section 5", (2) sections 4" 352B Pallet of Hydraulic Parts* Pumps, valves, pulleys, jig parts, (3) 7" conveyor belts 380 Hunting Blind 44" x 44" x 6' tall, windows on all sides 381 Round Bale Feeder 101" x 104" x 53" tall 382 Hay Feeder 52" x 10' x 80" tall 383 Enclosed Feeder 4' x 54" x 6' tall, on skids, has roof 384 Enclosed Feeder 4' x 54" x 6' tall, on skids, has roof 385 Pioneer Horse Cart P225/75R16 tires, 34 x 40" platform with seat, needs new shaft 386 IH 200 Manure Spreader 1/2" x 8'6" x 16" deep, works 386A Fuel Tank and T-Posts 28 x 44 x 60" long fuel tank-has a few holes, approx. 25 assorted t-posts 387 Livestock Waterer Mounted on 6" x 5' concrete slab 388 Livestock Waterer Mounted on 6" x 5' concrete slab, Ritchie Thrifty-King CT2-2000 389 Livestock Waterer Mounted on 6" x 5' concrete slab, Ritchie Thrifty-King CT2-2000 390 Round Hay Feeder* 8' x 45" tall 391 Round Hay Feeder* 8' x 45" tall 392 Skate Rolls* 19" x 10'8", 2 x 15 1/2" rolls, varied spacing 399 3 Schwinn Bikes and Bike Cart (3) 7 speed bikes, (1) child carrier cart 400 Rough Cut Cherry Table Top Slab 25-30" wide x 85" long, 2" thick 401 Rough Cut Cherry Table Top Slab 28" x 7' x 2" 402 Rough Cut Cherry Table Top Slab 30" x 7' x 2" 403 Rough Cut Cherry Table Top Slab 30" x 7' x 2" 404 Rough Cut Cherry Table Top Slab 30" x 7' x 2" 405 Rough Cut Walnut Slabs 4 pieces, 18-20" wide, 80-84" long, 2" thick 406 Rough Cut Walnut Lumber 9-12" wide, 8'6"-12'6" long, 1" thick, 6 pieces 407 Rough Cut Walnut Lumber 5 1/2-10" wide, 7'-12' long, 1-1 1/4" thick, approx. 390 board foot 407A Rough Cut Cedar Lumber* Approx. 616 BF, 4 1/2-28" wide, 9' long, 1" thick 407B Rough Cut Cedar Tabletop Slab* 26 x 102 x 2 1/2" thick 407C Rough Cut Cedar Tabletop Slab* 20 X 102 x 2 1/4" thick 407D Rough Cut Cedar Tabletop Slab* 23 x 102 x 2" thick 407E Rough Cut Cedar Tabletop Slab* 26 x 102 x 2 1/4" thick 407F Rough Cut Cedar Tabletop Slab* 27 x 102 x 2 1/8" thick 407G Rough Cut Cedar Tabletop Slab* 24 x 102 x 2" thick 407H Rough Cut Cedar Tabletop Slab* 20 X 102 X 2 1/4" thick 408 Cedar Firewood Blocks 3 1/2 x 3 1/2 x 20" long, approx. 1000-1100 pieces 409 Cedar Firewood Blocks 3 1/2 x 3 1/2 x 20" long, approx. 1000-1100 pieces 410 Cedar Firewood Blocks 3 1/2 x 3 1/2 x 20" long, approx. 1000-1100 pieces 411 Stacking Sticks 3/4 x 1 1/4 x 39", approx. 1500 pieces 412 Cedar Firewood Blocks 3 1/2 x 3 1/2 x 27" long, approx. 350 pieces 413 Cedar Cribbage Blocks 3 1/2 x 3 1/2 x 40" long, approx. 250 pieces 414 Cedar Cribbage Blocks* 3 1/2 x 3 1/2 x 42", approx. 260 pieces

Listing Information

MR Schrock will be relocating and have made the decision to liquidate their quality business assets at public auction. Most of this equipment is turn key and ready to go to work for you!

Information Lot
This is an absolute auction, meaning there are no minimums, no reserves, and no seller bidding. The highest bidder will be the new owner!
Auction Agent: Eugene Hochstetler 574-242-1100
Highlight Pieces: Skidders, Morgan Scragg mill, Power units, Newer resaws, Forklifts

Preview Information
Day before or by appointment only. Contact Eugene 574-242-1100
Location of auction: 6173 Flat Fork Rd, Mays Lick, KY 41055

Loadout Information
Date: 8/5 and 8/7-8/8 Time: 8 AM - 4 PM Contact Kevin Nisley 574-202-6154

Payment Information
Payment terms: 6% Sales Tax. 10% Onsite Buyers Premium, 13% Buyers Online and Phone Premium. Cash, check, wire transfer. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice. Onsite buyers, payment is due the day of the auction. If onsite bidders wish to send a wire and still be assessed only the onsite buyer’s premium, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction.

Bright Star Auctions Die-Cast Metal 1:64 Scale Truck Replica
Have fun buying a high-quality, die-cast toy! All proceeds including buyer's premium will go to Feed My Starving Children (FMSC) which is a Christian nonprofit dedicated to seeing every child and person around the world healthy, nourished and whole in body and spirit. Bright Star will pay for standard shipping and handling to the 48 contiguous states for buyers of this lot.
https://www.youtube.com/watch?v=jYATxeDmuzM&t=8s

CAT 972M Wheel Loader 1:50 Scale Replica- Die Cast Metal
Have fun buying a high-quality, die-cast toy! All proceeds including buyer's premium will go to Feed My Starving Children (FMSC) which is a Christian nonprofit dedicated to seeing every child and person around the world healthy, nourished and whole in body and spirit. Bright Star will pay for standard shipping and handling to the 48 contiguous states for buyers of this lot.
https://www.youtube.com/watch?v=jYATxeDmuzM&t=8s

Heavy Equipment Key Set 36 Keys
Shipping available for $20

Manual Sealless Steel Strapping Tool
Model A333, works for 1/2" 5/8" or 3/4" banding, new in box. Shipping available for $30

1/16 Scale Die Cast Metal Fordson Tractor
New in box

1/16 Scale Die Cast Metal Farmall Cub Tractor
New in box

1/16 Scale John Deere Die-Cast Metal 1934 Model
New in box

Hand Crank 1 Quart Butter Churn

Hand Crank 3 Quart Butter Churn

Hand Crank 2 Quart Butter Churn

Steel Toy Ladder Carriage

Steel Toy Circus Carriage

Cedar Tack and Harness Cabinet
38" x 8'8" x 7' tall, 2 saddle racks, 1 harness cabinet, feed bin in center, holds up to (12) 50 lb. bags of feed, overhead storage, has LED strips lights, powered by 20V battery convertor

Cedar Table and Chairs
4 chairs, 20" x 76" table, live slab tops with clear Epoxy finish

100

Morgan Band Scragg Mill
1 1/2" x 13'8" bands, fully hydraulic, 1" x 23 1/2" band wheels, 3" x 22' infeed, hydraulic controls, 5' x 42' overall, includes all catwalk under and around Scrag, does not include belt conveyors, hydraulic lines, or power unit

100A

Bands for Scragg
Approx. 50 brand new bands, 1 1/2" x 13'8"

101

Belt Conveyor
Hydraulic drive, 24" belt, 9" sides, 29" x 22'

102

Belt Conveyor
Hydraulic drive, 35" belt, 4' x 22'

103

2 Strand Log Deck with Stop'N'Load
Hydraulic drive, hydraulic cylinder on loading arm, 6' x 22'

104

3 Strand Transfer Deck
Hydraulic drive, C55B rooftop chain, 32" x 35'6"

105

John Deere Power Tech 6.8L Diesel Unit
(1st of an entirety) Meter reads: 906 hours, 170 hp, Family # WJDXL06.8014, WPT clutch, Dodge Raptor E60 bearing, includes single phase generator, Murphy starter switch, uses small amount of oil, does not include hydraulic system or air compressor. Steel frame not included.

105A

56" x 16' Steel Frame

106

Air Compressor
(Part of an entirety) Runs off lot # 105, Model: 41P0119, includes air tank, valves, and all lines to equipment

107

Hydraulic Unit
(Part of an entirety) 31 x 70 x 36" tank, includes all valves, pumps, and hydraulic lines to and from tank to equipment, intake hose fittings leak slightly

108

Power Unit Entirety of Lots 105-107
With 10% raise.

109

500 Gallon Diesel Fuel Tank
46" x 75" long, includes fuel lines to engine

110

Zimmerman Bandmill
7' x 24', 31 hp Vanguard gas motor, meter reads 227 hours, 1 x 24" band wheels, 1 1/2" bands, 36" width capacity, in excellent condition, 15'6" long bands

111

Bands for Zimmerman
Approx. 32 new blades, approx. 35 used blades, 1 1/2" x 15'6", 7/8" tooth spacing

112

Mitsubishi Power Unit by Georgetown Hydraulics
11.94L, Model: 6D24-TEC, 280 hp, 6 cylinder, control panel with ignition, meter reads 9780 hours, North Star single phase generator, John Deere Gearbox (model: Q593, SN: YZD593C187061), includes all hydraulic pumps, hydraulic valve station, includes all hydraulic lines from unit to equipment, 4' x 4' x 4' tank, 4' x 20' overall, includes all intake and exhaust pipe for engine, includes hydraulic cooling unit, only 2500 hours since complete rebuilt on engine

113

500 Gallon Diesel Fuel Tank
4' x 75" long, includes fuel lines to engine

114

175 Gallon Diesel Fuel Tank
Includes stand, 27 x 44 x 60" long

115

500 Gallon Air Tank
Includes all air lines to equipment and other tank

116

500 Gallon Air Tank
No air line included

117

Weinig Profimat 23E Moulder
5 head (2-upright, 2-horizontal) 8 x 10 1/2" capacity, 1 1/2'' spindle, control panel, hydraulic drive, includes pumps, includes dust pipe from machine to main overhead pipe, lots of new parts, spindles, rollers, etc., comes with 2 vertical cutting heads, in good working condition

117A

Tongue and Groove Moulder Heads
5 heads total, 1 1/2'' spindle, 2 spiral carbide, tooth heads, includes lots of new teeth

117B

Moulder Heads
7 heads total, 1 1/2'' spindle, used for making 3 1/2" x 3 1/2" mailbox posts

117C

Assorted Moulder Heads
9 heads total, 1 1/2'' spindle

117D

Assorted Moulder Heads
9 heads total, 1 1/2'' spindle

117E

Main Moulder Heads
1 1/2'' spindle, Main top and bottom cutting heads, spiral carbide tooth style, includes 2 boxes of new inserts

117F

Assorted Moulder Heads
1 1/2'' spindle, 9 heads total

117G

Moulder Parts
Wrenches, spacers, belts

117H

Moulder Heads and Blades
3 heads and lots of ripping blocks

117I

Moulder Parts
Lots of assorted parts

117J

Moulder Parts
Knives, profiles, gear wheels, new feed rolls

117K

Moulder Parts
Lots of knives and profiles

117L

Storage Bench for Moulder
Made to organize heads, spacers, saws, and knives. 32 x 38 x 60" tall

118

Metabo 12" Chop Saw
110 V plug in, 12" x 5' skate rolls, includes table

119

Kobalt 12" Chop Saw
SN: 052665, 12" x 5' skate rolls, 110 V plug in, includes table

119A

12" DeWalt Chop Saw with Bench
Converted to hydraulic power, 18" x 9' bench

120

DeWalt 12" Chop Saw
SN: 263715, 110 V plug in, includes table

121

John Deere 6068 Diesel Unit
(1st of an entirety) Model: 6068HF285, SN: PE6068L030075, 116-129 KW, includes all exhaust piping, radiator, batteries, and control stand. Includes clutch and gearbox, does not include hydraulic pumps or tank, includes 5' x 12' steel frame, includes compressor mounted to frame, compressor is not currently working, starts and runs good

122

Hydraulic Unit
(Part of an entirety) Piggyback pump, hydraulic valve station, 24 x 54 x 48" tank, includes all hydraulic lines to equipment

123

Power Unit Entirety of Lots 121-122
With 10% raise.

124

Tru-Cut 2 Head Resaw with Return
1" x 28" band wheels, 7" x 18' return belt, 7" x 18' feed belt, fully hydraulic, good condition

125

Tru-Cut 2 Head Resaw
1 x 28" band wheels, fully hydraulic, 6" x 13' feed belt, 1 1/4" bands, includes all bands as pictured, some are sharpened

126

Cooks "Cat's Claw" Band Sharpener
SN: 0115AUDB4, 110 V plug in, includes extra grinding wheel

127

Wood-Mizer BMT200/250 Band Tooth Setter
110 V plug in, includes control box, in good condition

128

Wood-Mizer Shop Series Band Sharpener
110 V plug in, condition unknown

129

John Deere 4045 Power Unit
(1st of an entirety) Model: 4045TF275, SN: PE4045T352933, 82 KW, NACD clutch, control panel, meter reads 14690 hours, includes single phase North Star generator, radiator, includes all exhaust piping

130

Quincy 20hp Air Compressor
(Part of an entirety) Includes air lines to tanks and equipment, does not include tanks, includes belts

131

Hydraulic Unit
(Part of an entirety) 30 x 60 x 18" tank on stand, dual pumps, cooling unit, includes all hydraulic valves and lines to equipment

132

Power Unit Entirety of Lots 129-131
With 10% raise.

133

52" Dust Blower
24" inlet and outlet, hydraulic drive, uninstalled, in good condition

134

Dust Pipe System
Includes all pipe as pictured, (6) 24" pipe, flex hose, elbows, fittings, adaptors, includes pipe installed on ceiling in moulder building

135

Sears Roebuck Table Saw
Model: 113.299315, SN: 87302P2092, 10" blade, 27" x 44" table top, hydraulic drive

136

Craftsman Table Saw
SN: R901300835, 10" blade, hydraulic drive, 27" x 44" table top

137

Delta Table Saw
SN: 17E-061182-2017-21-CT, 10" blade, 110 V plug in, mounted on wheels, 27" x 40" table top

138

Whirlwind Upcut Saw
SN: 1604194R, model: 1000R, air cylinder, 12" blade, foot control, no drive

139

Hitachi CB 75F Bandsaw
Air powered, 5/8" x 111 1/4" bands, includes extra bands, 2 3/4" x 16" band wheels

140

2 Head Drill Press
Air powered, shop built on wheels

141

Delta Drill Press
SN: 014420W2080, hydraulic drive, mounted on cart dolly

142

Porter-Cable Drill Press
SN: 098285, 110 V plug in, 12 speed

143

Skil 3320 Drill Press
SN: 602, 110 V plug in, 10", mounted on wooden stand

144

Weaver Shaper
27" x 39" tabletop, hydraulic drive, 4" cutting head, includes box of parts and tools

150

Skate Rolls
12" x 10' on legs

151

Skate Rolls
18" x 10'

152

Skate Rolls
18" x 10'

153

Skate Rolls
18" x 10'

154

Skate Rolls
18" x 10'

155

Skate Rolls
90°, 12" wide, 52" inside to inside

156

Skate Rolls
18" x 10'

157

Skate Rolls
18" x 4', includes 17" x 3', section of rolls

158

Fros Tek Gas Freezer
15" x 3' x 2' deep storage

159

Mitsubishi 6D-22T Diesel Engine
280 hp at 1800 rpm, 680 cubic inches, needs to be rebuilt, includes clutch, needs to be rebuilt, clutch rebuilt parts included

160

Radiator
2" hose inlet, 27" x 32" x 6" deep

161

Taping Machine
Air over 110 V power, 27" x 45" skate rolls, works good

162

Taping Machine
Air over 110 V power, 20" x 35" skate rolls, works good

163

Taping Machine
Air over 110 V power, parts machine, 29 x 42" rolls

164

Tape
48mm x 914m rolls, 6 rolls/box, 3 full boxes, works for lots 161-163

165

Aluminum Birdhouse Jig

166

Aluminum Birdhouse Jig
Includes air lines and valves, staple gun

167

Aluminum Birdhouse Jig
12 x 41" skate roll section

168

Aluminum Birdhouse Jig

169

Aluminum Birdhouse Jig
Air hoses and valves

170

Aluminum Birdhouse Jig
(3) large drills, air lines and valves

171

Aluminum Birdhouse Jig
Air lines and valves, (2) staple guns

172

Aluminum Birdhouse Jig
Air lines and valves

172A

Staple Guns and Fittings
L-staplers, assorted fittings

172B

Assorted Staple Guns
Fit on aluminum jigs

172C

Assorted Staple Guns
Fit on aluminum jigs

172D

Assorted Staple Guns
Fit on aluminum jigs

172E

Assorted Staple Guns
Fit on aluminum jigs

173

Plastic Bird Feeder Tubes
3 1/2" x 12 1/2", 276 pieces

174

Plastic Bird Feeder Tubes
3 1/2" x 7 3/4", 414/box, 2 boxes, 828 pieces

175

Plastic Bird Feeder Tubes
3 1/2"x 7 3/4", 414/box, 2 full boxes, 108 pieces on top of boxes, 936 pieces total

176

Pallet of Shrink Wrap
18" x 70' rolls, 4 rolls/box, 9 boxes, 36 rolls

177

Pallet of Shrink Wrap
18" x 70' rolls, 4 rolls/box, 9 boxes, 36 rolls

178

Pallet of Shrink Wrap
18" x 70' rolls, 4 rolls/box, 9 boxes, 36 rolls

179

Birdhouses/Feeders
3 pieces

180

Birdhouses/Feeders
2 pieces

181

Birdhouses/Feeders
4 pieces

182

Birdhouses/Feeders
2 pieces

183

Birdhouses/Feeders
3 pieces

184

Birdhouse
1 piece

185

Birdhouses/Feeders
3 pieces

186

Birdhouses/Feeders
3 pieces

187

Birdhouses/Feeders
3 pieces

188

Birdhouses/Feeders
3 pieces

189

Birdhouses/Feeders
3 pieces

190

Birdhouses/Feeders
3 pieces

191

Pallet of Cedar Birdhouse Parts

192

Pallet of Cedar Birdhouse Parts

193

Pallet of Cedar Birdhouse Parts

194

Cedar Birdhouses/Feeders
3 pieces

195

Cedar Birdhouses/Feeders
4 pieces

196

Cedar Birdhouses/Feeders
6 pieces

197

Cedar Birdhouses/Feeders
6 pieces

198

Pallet of Cedar Birdhouse Parts

199

Pallet of Cedar Birdhouse Parts

199A

Pallet of Cedar Birdhouse Parts

199B

Pallet of Cedar Birdhouse Parts

199C

Pallet of Cedar Birdhouse Parts

200

2 Yard Self Dumping Hopper
With fork pockets

201

2 Yard Self Dumping Hopper
With fork pockets

202

2 Yard Self Dumping Hopper
With fork pockets

203

2 Yard Self Dumping Hopper
With fork pockets

204

2 Yard Self Dumping Hopper
With fork pockets

205

2 Yard Self Dumping Hopper
With fork pockets

206

Jet Pallet Jack
6000 lb. capacity, SN: 2000128454, 6 x 48" forks, 27" wide

207

Scissor-Lift Pallet Jack
6 x 46" forks, 27" wide, approx. 5000 lb. capacity

208

Roughneck Pallet Jack
4400 lb. capacity, 6 x 48" forks, 26" wide

210

Lumber Cart
4' x 7' x 32" tall

211

Lumber Cart
42" x 54" x 3' tall

212

Lumber Cart
4' x 7' x 32" tall

11527

213

Lumber Cart
4' x 7' x 32" tall

I2HSCKASR71C000040

214

Lumber Cart
44 x 44 x 32" tall

215

Lumber Cart
42 x 48 x 36" tall

216

Lumber Cart
4' x 4' x 3' tall

217

Lumber Cart
40" x 6' x 3' tall

218

Lumber Cart
44" x 7' x 32" tall

219

Lumber Cart
4' x 7' x 32" tall

220

Lumber Cart
4' x 7' x 32" tall

221

Lumber Cart
44" x 4' x 34" tall

222

Chop Saw*
20" blade, 20"x16' dead roll feed, No drive, Line shaft ready, Manual pull down

223

4 Cylinder Diesel Power Unit*
Make and Model unknown, No clutch, Was running when last used

225

Stihl MS661C Chainsaw*
20" bar, includes extra bar, works good

226

Stihl MS661C Chainsaw*
20" bar, works good

227

Stihl MS661C Chainsaw*
20" bar, works good

228

Stihl MS500i Chainsaw*
20" bar, works good

229

Stihl MS500i Chainsaw*
20" bar, works good

230

Husquarna 390XP Chainsaw*
18" bar, works good

231

Husquarna 390XP Chainsaw*
18" bar, works good

232

Husquarna 390XP Chainsaw*
18" bar, works good

250

2014 Bobcat S750 Skid Steer
SN: ATDZ13401
Meter reads: 2,359 hours
Engine: Bobcat 3.4L turbo diesel-Tier 4
HP: 85
Fuel type: Diesel
ROPS: Fully enclosed cab with heat, AC, and radio
2 Speed: Yes
Highflow: Yes
Lift capacity: 3,200 lb
Attachments: No

Features and Notes: Hand and foot controls, does not include tracks, or any attachments, 12-16.5 tires, runs and operates well

251

Bobcat Over-Wheel Skid Steer Tracks
15' wide, was used on lot # 250, on 12-16.5 tires, in good condition

252

Bobcat 80" Heavy Duty Bucket
Standard quick attach, Part # 7272681

253

85" Brush Grapple
Standard quick attach, 2 hose hydraulic hookup, in good condition

254

Over Tire Skid Steer Tracks
14" wide

254A

Bobcat Skid Steer Tires with Rims*
2 tires, 10-16.5, 8 lug

255

Crown C-5 Forklift
SN: 9A199730
Meter reads: 6,227 hours
Engine: 4 cylinder
Fuel type: LP
Load capacity: 5,200 lb
Stage mast: 3 stage
Mast height: 86", 45" wide
Side shift: Yes
Fork positioner: No
ROPS: Open cab
Tire size: 28 x 9-15 on front, 6.5-10 on rear
Tires: Solid

Features and Notes: Machine weighs 10,700 lb, 5 x 48" forks, runs and operates good.

256

Toyota 8FGCU25 Forklift
SN: 30729
Meter reads: 6,773 hours
Engine: Toyota
Fuel type: LP
Load capacity: 4800 lb
Stage mast: 3 stage
Mast height: 82" tall x 38" wide
Side shift: Yes
Fork positioner: Yes
ROPS: Open cab
Tire size: 533/178-381 on front, 406/152-266.7 on rear
Tires: Solid

Features and Notes: 5 x 42" forks, runs and operates well

257

Toyota Forlift
Model: 526FGCU30
SN: 60519
Meter reads: 10,826 hours
Engine: Toyota
Fuel type: LP
Load capacity: 6,000 lb
Stage mast: 2 stage
Mast height: 86"
Side shift: Yes
Fork positioner: No
ROPS: Open cab
Tire size: 21 x 8 x 15 on front, 16 x 6 x 10.5 on rear
Tires: Solid

Features and Notes: 5 x 42" forks, runs and operates well. Engine does overheat after an hour of steady use.

260

John Deere 650G Dozer
SN: T0650GH767318
Meter reads: 9,705 hours
Engine: John Deere 4045
Fuel type: Diesel
Blade: 104" 6 way
ROPS: Open
A/C: No
Heater: No

Features and Notes: 18" tracks, 4 speed Power Shift transmission, winch with 5/8" cable, good under carriage, runs and operates great.

265

John Deere 648G Grapple Skidder
PIN: DW648GX558797, meter reads: 16,703 hours, fully enclosed cab, 8 speed power-shift transmission, 88" blade, winch with 3/4" cable, 10' max width grapple, 30.5R32 tires, includes tire chains for w tires, John Deere 6,068 diesel engine

266

1990 Timberjack 240A Cable Skidder
SN: CT7299, 4 speed manual transmission, 6 cylinder Deutz diesel engine, 82" blade, 18.4-26 tires, in good condition, Gearmatic winch with 1/2" cable (SN: 11933431-W52040)

269

Skidder Tires and Rims
23.1-26, 12 lugs, fits on lot 266, 4 tires

270

Barko 275B TRK Knuckleboom
SN: 21154
Meter reads: 876 hours
Engine: John Deere 4045
Fuel type: Diesel
Continuous Grapple: Yes
Trailer: Pitts
Delimber: No
Bucksaw Hookups: Yes
A/C: No
Heater: No

Features and Notes: Fires right up and runs, pilot joystick controls.

271

Bucksaw
Direct drive, 48" bar, 52" x 12' log rack, in good condition

275

1994 Freightliner Log Truck
VIN: 1FVXFDYB8RH482973
Meter reads: 693,435 miles
Engine: Cummins N14
Transmission: 13 speed Eaton Fuller
Log loader: Rotobec 80 Elite (SN: 10800100-030185)
Suspension: Henrik Rubber Block
GVWR: Approx. 66,000 lb
Heat/AC: Yes
Full lock in rears: Unknown
Double frame: Yes

Features and Notes: Has continuous grapple, starts and runs good, loader operates as it should, 88" x 88" log bunks, 22' long log rack, 11R24.5 tires on 2 rear axles, 385/65R22.5 tires on front. Driver door does not open, latch is busted, there is a blown hose on the loader grapple. Has title but will be a delay

276

2001 Navistar 9900iX Semi Truck
VIN: 2HSCKASR71E000040
Meter reads: 586,514 miles
Engine: CAT 6NZ less than 4,000 miles since rebuild
Transmission: 13 speed Eaton Fuller
GVWR: 52,000 lb
Front axle rating: 12,000 lb.
Rear axle rating: 20,000 lb
Heat/AC: Yes
Wet kit: No

Features and Notes: 260" WB, 64" sleeper, 285/75R24.5 tires, runs and drives great. Fan clutch on engine is not working. Has a title but there will be a delay

280

2014 Pitts Log Trailer
VIN: 5JYLT3629FP150172, GVWR: 80,000 lb., GAWR: 24,000 lb, 6 bunk, center point suspension, 11R24.5 tires, includes straps, 92" wide x 87" tall bunks, 38' long, good condition, has rack on front. Has a title but there will be a delay

281

1977 Nelson Lo-Boy Trailer
SN: 3611, Model: WBT-30F, rated at 60000 lb, 8' x 21' main deck, 3' dovetail, 2' x 32" ramps, 38' long overall

282

Wells Cargo 10' Construction Trailer
VIN: 1WC200D1411095084, 2" ball, 5 lug axle, ST205/75R15 tires, 14'6" long overall, ladder racks on both sides and top, lots of shelving inside, includes spare tire and contents of trailer. Has title

283

Flatbed Gooseneck Trailer*
7' x 18' main deck, 2' dovetail, 14" x 5' ramps, 28'6" long overall, ST235/80R16 tires, 8 lug axles, has wiring for trailer lights and brakes. No title, bill of sale only

296

Scag Walk Behind Mower*
48" deck, 14 hp Kohler engine, SN: 19160363, Model: SW48-14KH, good working mower

297

500 Gallon Diesel Fuel Tank
4' x 6' long

298

Log Bunks
1 piece, 8' x 8' x 5' tall, ready to bolt on

299

300 Gallon Diesel Fuel Tank on Skids
12 V Gasboy fuel pump, model: 620B-DSL

300

Emglo Air Compressor
SN: 07269105, 8 hp Honda motor

301

Quincy 340 Air Compressor
SN: 6132198, no drive, worked well when removed

302

Worthington Air Compressor
SN: ED9803, Honda GX 270 motor, 2' x 64" tank, size 4 7/8 x 2 7/8 x 2 1/8

303

Hydraulic Unit
Honda GX 270 gas motor, 15 x 21 x 5" tank, pump and valves

304

Hydraulic Unit
10 hp electric motor, 22 x 29 x 16" tank

305

Electric Motors and Gearboxes
(2) 2 hp with gearboxes, (1) unknown hp with hydraulic pump

306

Electric Motors
(2) 20 hp, (1) 3 hp with gearbox, electrical box and controls

307

Radiator Unit
40 x 48"

308

Radiator Unit
36" x 42"

309

Radiator Unit
34" x 42"

310

PAC Auto Strapping Machine
Model: PSM1412-1C3A, 110 plug in, 3/8" poly banding

311

Banding Cart
1/2" poly banding, crimper and strapping tool included

312

Chop Saws
(4) Hitachi saws, all selling as parts saws

313

Chop Saws
(3) Kobalt saws selling for parts, DeWalt saw is hydraulic drive and works

314

Drill Propelled Tre stand
36" x 42" platform, designed for wheel chair to be driven onto platform and "climb" up the stand

315

Cart and Stands
Cart with aluminum jig part fasteners and tape, 2 adjustable stands

316

2 Gas Jugs and Cant Hook
(2) 5 gallon jugs, 60" cant hook

317

Milwaukee 10 1/4" Circle Saw
SN: B49AD1828-00056, 110 V plug in, includes case

317A

Northern Tool Pipe Threader
SN: 002, 1/2"-2", 110 V plug in, works good

317B

Horse Drawn Cultivator
5 tooth, single horse

317C

Tinned Meat Mauler
Powered by 3 1/2 hp Honda motor

317D

Honda GX160 Motor
5 1/2 hp

317E

School Desk and Chair
20 x 24", desktop

317F

Hand Tools*
4" bench vise, hay hook, sledge hammer head, potato planter

318

Delta Dust Collector
Converted to hydraulic drive, 10" blower, (4) 4" inlet pipe, 2 bag collector, on wheels

318A

Banding
1/2" poly banding, 600 lb./box, 7 new boxes, 1/2" seals-1000/box, 6 boxes, includes crimper

318B

Scaffolding
(10) cross braces, 80" long, (12) 5' x 5' tall legs, planks not included

319

Sawblades and Belts
Assorted motor belts, new and used 10-12" sawblades, new hydraulic pump

320

Work Bench and LP Cabinet
14 x 28 x 30" LP storage cabinet, 21 x 42 x 56" tall workbench

321

Box Fans
(7) 18" box fans-110 plug in wiring, poly banding, hose clamps, jig parts

322

Pallet of Misc.
Chainsaw safety clothing, toolbox, antique glass bottles, rubber counter weights

323

Pallet of Tools
Corded DeWalt drills, air nailers, and staplers

324

Honda Motor and Magnet Rollers
Motor size unknown

325

Pallet of Assorted Fasteners
Pole barn spikes, framing nails, metal screws

326

Pallet of Tools
10" Kobalt chop saw, skill saws, Sawzall, bench grinder, Bosch hammer drill, Skil router table

327

Pallet of Assorted Fasteners
Pole barn spikes, metal screws

328

Pallet of Assorted Fasteners
Metal screws, 16D hand nails

329

Pallet of Assorted Fasteners
Metal screws

330

Pallet of Assorted Fasteners
Metal screws, pole barn spikes, 16D nails

331

Air Powered Drum Fan
Mounted on wheels

332

2 Floor Fans
Both 24" air powered

333

2 Floor Fans
Both 24" air powered

334

Box Fan
Air powered, 36" fan, 44 x 44" box

335

2 Floor Fans
Air powered both 24"

336

12 V Light Stands
(4) stands, have all wiring to run lights off 12 V batteries, 6' tall, mounted on wheels

337

Pallet of Fasteners
Assorted staples

338

Pallet of Parts
PVC fittings, jig parts, screws

339

Pallet of Misc.
Mailbox, DeWalt tools

340

Pallet of Misc.
Zip ties, parts, drill bits, grease gun

341

Pallet of Misc.
DeWalt battery nail gun-needs work, done on driver, creeper, assorted staples, scales

342

Pallet of Misc.
Air sanders, air lines, cylinders, bolts, chain, fittings

343

Pallet of Aluminum Jig Parts

344

Pallet of Clear Packing Tape
48mm x 50m rolls, 96 rolls/box, 8 full boxes

345

Bird Feeder Parts
Feeder wire, tape

346

Assorted Rubber Floor Mats

347

Assorted Air Hose and 3 Chairs

348

Pallet of Misc.
Small tool sets, parts

349

Pallet of Hand Tools
Handsaws, milk jug, hedge trimmer, plow seats, battery weed-eater

350

Pallet of Hydraulic Parts

351

Pallet of Misc.
Plow handles, large bird box, box of tape, assorted fasteners

352

2 Wall Heaters
(1) gas, (1) electric

352A

Pallet of Parts*
Hose fittings, hydraulic fittings, hose clamps, (4) 10' sections of 6" flex hose, (1) section 5", (2) sections 4"

352B

Pallet of Hydraulic Parts*
Pumps, valves, pulleys, jig parts, (3) 7" conveyor belts

380

Hunting Blind
44" x 44" x 6' tall, windows on all sides

381

Round Bale Feeder
101" x 104" x 53" tall

382

Hay Feeder
52" x 10' x 80" tall

383

Enclosed Feeder
4' x 54" x 6' tall, on skids, has roof

384

Enclosed Feeder
4' x 54" x 6' tall, on skids, has roof

385

Pioneer Horse Cart
P225/75R16 tires, 34 x 40" platform with seat, needs new shaft

386

IH 200 Manure Spreader
1/2" x 8'6" x 16" deep, works

386A

Fuel Tank and T-Posts
28 x 44 x 60" long fuel tank-has a few holes, approx. 25 assorted t-posts

387

Livestock Waterer
Mounted on 6" x 5' concrete slab

388

Livestock Waterer
Mounted on 6" x 5' concrete slab, Ritchie Thrifty-King CT2-2000

389

Livestock Waterer
Mounted on 6" x 5' concrete slab, Ritchie Thrifty-King CT2-2000

390

Round Hay Feeder*
8' x 45" tall

391

Round Hay Feeder*
8' x 45" tall

392

Skate Rolls*
19" x 10'8", 2 x 15 1/2" rolls, varied spacing

399

3 Schwinn Bikes and Bike Cart
(3) 7 speed bikes, (1) child carrier cart

400

Rough Cut Cherry Table Top Slab
25-30" wide x 85" long, 2" thick

401

Rough Cut Cherry Table Top Slab
28" x 7' x 2"

402

Rough Cut Cherry Table Top Slab
30" x 7' x 2"

403

Rough Cut Cherry Table Top Slab
30" x 7' x 2"

404

Rough Cut Cherry Table Top Slab
30" x 7' x 2"

405

Rough Cut Walnut Slabs
4 pieces, 18-20" wide, 80-84" long, 2" thick

406

Rough Cut Walnut Lumber
9-12" wide, 8'6"-12'6" long, 1" thick, 6 pieces

407

Rough Cut Walnut Lumber
5 1/2-10" wide, 7'-12' long, 1-1 1/4" thick, approx. 390 board foot

407A

Rough Cut Cedar Lumber*
Approx. 616 BF, 4 1/2-28" wide, 9' long, 1" thick

407B

Rough Cut Cedar Tabletop Slab*
26 x 102 x 2 1/2" thick

407C

Rough Cut Cedar Tabletop Slab*
20 X 102 x 2 1/4" thick

407D

Rough Cut Cedar Tabletop Slab*
23 x 102 x 2" thick

407E

Rough Cut Cedar Tabletop Slab*
26 x 102 x 2 1/4" thick

407F

Rough Cut Cedar Tabletop Slab*
27 x 102 x 2 1/8" thick

407G

Rough Cut Cedar Tabletop Slab*
24 x 102 x 2" thick

407H

Rough Cut Cedar Tabletop Slab*
20 X 102 X 2 1/4" thick

408

Cedar Firewood Blocks
3 1/2 x 3 1/2 x 20" long, approx. 1000-1100 pieces

409

Cedar Firewood Blocks
3 1/2 x 3 1/2 x 20" long, approx. 1000-1100 pieces

410

Cedar Firewood Blocks
3 1/2 x 3 1/2 x 20" long, approx. 1000-1100 pieces

411

Stacking Sticks
3/4 x 1 1/4 x 39", approx. 1500 pieces

412

Cedar Firewood Blocks
3 1/2 x 3 1/2 x 27" long, approx. 350 pieces

413

Cedar Cribbage Blocks
3 1/2 x 3 1/2 x 40" long, approx. 250 pieces

414

Cedar Cribbage Blocks*
3 1/2 x 3 1/2 x 42", approx. 260 pieces

Photo Gallery

Share This Listing

Other Sales by
This Company

Nov 8
Mio, MI

Nov 13
Various, IN

Jan 1
Des Arc, AR

Oct 1
Middlebury, IN

Schrock Woodworking

Bright Star Realty and Auctions, INC

Contact: Loren Beachy
Phone: 574-825-0704

6173 Flat Fork RD
Mays Lick, KY 41055

Saturday Aug 5, 2023 Completed

Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded where required.
Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer:

Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.
Governing Law.
1. For Auctions in the State of Indiana and Online. Unless otherwise indicated, all Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are deemed to be entered into in the State of Indiana, all bids and payments are deemed to be received in the State of Indiana, and the contract, if any, will be deemed to be formed and entered into in the State of Indiana.
Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.
Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
Nature of the Auction. This Property is being sold at the Auction in the manner indicated on the first page of this Agreement.
Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
2. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
3. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
4. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
5. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
6. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
7. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
8. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.
9. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties, (i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
10. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
11. No Reduction or Retraction of Online Bids. Online bids may not be reduced or retracted.
12. Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.

1. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.
Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). All prebids and maxbids placed online are considered absentee bids. Auctioneer pledges complete integrity in the treatment of absentee bids and absentee bids may be initiated and advanced in accordance with Auctioneer’s policies and procedures. Auctioneer has the right to initiate any absentee bids at 25% to 50% of their maximum amount. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot of Personal Property will be the Buyer of such Property.
All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.

Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or representation by Auctioneer.
Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ringman, or multiple bid assistants or ringmen, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked-Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases are due upon receipt of your invoice. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. If onsite bidders wish to send a wire, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.
Wire Transfer Payments. Buyer shall obtain verbal verification of all bank account information from Bright Star Auctions prior to initiating transfer. Except as otherwise provided by law, we shall not be liable for any loss or damage due to misplaced, unauthorized or fraudulent fund transfers.
ACH/eCheck Payments. By providing account information to Bright Star Auctions, buyer gives permission for Bright Star Auctions to retain payment information on file and represents they are the authorized account holder. Upon authorization to collect payment from Buyers account and prior to transfer, Buyer is responsible to notify their financial institution of the impending transaction. Buyer agrees to notify Bright Star Auctions of any changes in account information.
Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.

No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Tools, packing material, and/or assistance will not be supplied at Pickup, so Buyer must plan accordingly. Disassembly and removal shall be done in a quiet and workmanlike manner, and each Buyer, in making its bid, shall thereby indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer’s employees, agents, representatives, or independent contractors in connection with the Pickup. Any and all damages to the Pickup site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller. Each Buyer must show a copy of the invoice (digital or hard copy) and government-issued photo identification before Lots will be released. No Buyer shall bring pets or young children to the Pickup, as the movement of Lots presents an extremely high-risk environment that could result in injury or death.
Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them. In addition, Buyer’s bidding privileges may be suspended at future auctions.
Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.
Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled to specific performance or other equitable relief.
Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim or suit relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their rights.

Listing Details
MR Schrock will be relocating and have made the decision to liquidate their quality business assets at public auction. Most of this equipment is turn key and ready to go to work for you! 00 Information Lot This is an absolute auction, meaning there are no minimums, no reserves, and no seller bidding. The highest bidder will be the new owner! Auction Agent: Eugene Hochstetler 574-242-1100 Highlight Pieces: Skidders, Morgan Scragg mill, Power units, Newer resaws, Forklifts 01 Preview Information Day before or by appointment only. Contact Eugene 574-242-1100 Location of auction: 6173 Flat Fork Rd, Mays Lick, KY 41055 02 Loadout Information Date: 8/5 and 8/7-8/8 Time: 8 AM - 4 PM Contact Kevin Nisley 574-202-6154 03 Payment Information Payment terms: 6% Sales Tax. 10% Onsite Buyers Premium, 13% Buyers Online and Phone Premium. Cash, check, wire transfer. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice. Onsite buyers, payment is due the day of the auction. If onsite bidders wish to send a wire and still be assessed only the onsite buyer’s premium, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. 04 Bright Star Auctions Die-Cast Metal 1:64 Scale Truck Replica Have fun buying a high-quality, die-cast toy! All proceeds including buyer's premium will go to Feed My Starving Children (FMSC) which is a Christian nonprofit dedicated to seeing every child and person around the world healthy, nourished and whole in body and spirit. Bright Star will pay for standard shipping and handling to the 48 contiguous states for buyers of this lot. https://www.youtube.com/watch?v=jYATxeDmuzM&t=8s 05 CAT 972M Wheel Loader 1:50 Scale Replica- Die Cast Metal Have fun buying a high-quality, die-cast toy! All proceeds including buyer's premium will go to Feed My Starving Children (FMSC) which is a Christian nonprofit dedicated to seeing every child and person around the world healthy, nourished and whole in body and spirit. Bright Star will pay for standard shipping and handling to the 48 contiguous states for buyers of this lot. https://www.youtube.com/watch?v=jYATxeDmuzM&t=8s 87 Heavy Equipment Key Set 36 Keys Shipping available for $20 88 Manual Sealless Steel Strapping Tool Model A333, works for 1/2" 5/8" or 3/4" banding, new in box. Shipping available for $30 89 1/16 Scale Die Cast Metal Fordson Tractor New in box 90 1/16 Scale Die Cast Metal Farmall Cub Tractor New in box 91 1/16 Scale John Deere Die-Cast Metal 1934 Model New in box 92 Hand Crank 1 Quart Butter Churn 93 Hand Crank 3 Quart Butter Churn 94 Hand Crank 2 Quart Butter Churn 95 Hand Crank 2 Quart Butter Churn 96 Steel Toy Ladder Carriage 97 Steel Toy Circus Carriage 98 Cedar Tack and Harness Cabinet 38" x 8'8" x 7' tall, 2 saddle racks, 1 harness cabinet, feed bin in center, holds up to (12) 50 lb. bags of feed, overhead storage, has LED strips lights, powered by 20V battery convertor 99 Cedar Table and Chairs 4 chairs, 20" x 76" table, live slab tops with clear Epoxy finish 100 Morgan Band Scragg Mill 1 1/2" x 13'8" bands, fully hydraulic, 1" x 23 1/2" band wheels, 3" x 22' infeed, hydraulic controls, 5' x 42' overall, includes all catwalk under and around Scrag, does not include belt conveyors, hydraulic lines, or power unit 100A Bands for Scragg Approx. 50 brand new bands, 1 1/2" x 13'8" 101 Belt Conveyor Hydraulic drive, 24" belt, 9" sides, 29" x 22' 102 Belt Conveyor Hydraulic drive, 35" belt, 4' x 22' 103 2 Strand Log Deck with Stop'N'Load Hydraulic drive, hydraulic cylinder on loading arm, 6' x 22' 104 3 Strand Transfer Deck Hydraulic drive, C55B rooftop chain, 32" x 35'6" 105 John Deere Power Tech 6.8L Diesel Unit (1st of an entirety) Meter reads: 906 hours, 170 hp, Family # WJDXL06.8014, WPT clutch, Dodge Raptor E60 bearing, includes single phase generator, Murphy starter switch, uses small amount of oil, does not include hydraulic system or air compressor. Steel frame not included. 105A 56" x 16' Steel Frame 106 Air Compressor (Part of an entirety) Runs off lot # 105, Model: 41P0119, includes air tank, valves, and all lines to equipment 107 Hydraulic Unit (Part of an entirety) 31 x 70 x 36" tank, includes all valves, pumps, and hydraulic lines to and from tank to equipment, intake hose fittings leak slightly 108 Power Unit Entirety of Lots 105-107 With 10% raise. 109 500 Gallon Diesel Fuel Tank 46" x 75" long, includes fuel lines to engine 110 Zimmerman Bandmill 7' x 24', 31 hp Vanguard gas motor, meter reads 227 hours, 1 x 24" band wheels, 1 1/2" bands, 36" width capacity, in excellent condition, 15'6" long bands 111 Bands for Zimmerman Approx. 32 new blades, approx. 35 used blades, 1 1/2" x 15'6", 7/8" tooth spacing 112 Mitsubishi Power Unit by Georgetown Hydraulics 11.94L, Model: 6D24-TEC, 280 hp, 6 cylinder, control panel with ignition, meter reads 9780 hours, North Star single phase generator, John Deere Gearbox (model: Q593, SN: YZD593C187061), includes all hydraulic pumps, hydraulic valve station, includes all hydraulic lines from unit to equipment, 4' x 4' x 4' tank, 4' x 20' overall, includes all intake and exhaust pipe for engine, includes hydraulic cooling unit, only 2500 hours since complete rebuilt on engine 113 500 Gallon Diesel Fuel Tank 4' x 75" long, includes fuel lines to engine 114 175 Gallon Diesel Fuel Tank Includes stand, 27 x 44 x 60" long 115 500 Gallon Air Tank Includes all air lines to equipment and other tank 116 500 Gallon Air Tank No air line included 117 Weinig Profimat 23E Moulder 5 head (2-upright, 2-horizontal) 8 x 10 1/2" capacity, 1 1/2'' spindle, control panel, hydraulic drive, includes pumps, includes dust pipe from machine to main overhead pipe, lots of new parts, spindles, rollers, etc., comes with 2 vertical cutting heads, in good working condition 117A Tongue and Groove Moulder Heads 5 heads total, 1 1/2'' spindle, 2 spiral carbide, tooth heads, includes lots of new teeth 117B Moulder Heads 7 heads total, 1 1/2'' spindle, used for making 3 1/2" x 3 1/2" mailbox posts 117C Assorted Moulder Heads 9 heads total, 1 1/2'' spindle 117D Assorted Moulder Heads 9 heads total, 1 1/2'' spindle 117E Main Moulder Heads 1 1/2'' spindle, Main top and bottom cutting heads, spiral carbide tooth style, includes 2 boxes of new inserts 117F Assorted Moulder Heads 1 1/2'' spindle, 9 heads total 117G Moulder Parts Wrenches, spacers, belts 117H Moulder Heads and Blades 3 heads and lots of ripping blocks 117I Moulder Parts Lots of assorted parts 117J Moulder Parts Knives, profiles, gear wheels, new feed rolls 117K Moulder Parts Lots of knives and profiles 117L Storage Bench for Moulder Made to organize heads, spacers, saws, and knives. 32 x 38 x 60" tall 118 Metabo 12" Chop Saw 110 V plug in, 12" x 5' skate rolls, includes table 119 Kobalt 12" Chop Saw SN: 052665, 12" x 5' skate rolls, 110 V plug in, includes table 119A 12" DeWalt Chop Saw with Bench Converted to hydraulic power, 18" x 9' bench 120 DeWalt 12" Chop Saw SN: 263715, 110 V plug in, includes table 121 John Deere 6068 Diesel Unit (1st of an entirety) Model: 6068HF285, SN: PE6068L030075, 116-129 KW, includes all exhaust piping, radiator, batteries, and control stand. Includes clutch and gearbox, does not include hydraulic pumps or tank, includes 5' x 12' steel frame, includes compressor mounted to frame, compressor is not currently working, starts and runs good 122 Hydraulic Unit (Part of an entirety) Piggyback pump, hydraulic valve station, 24 x 54 x 48" tank, includes all hydraulic lines to equipment 123 Power Unit Entirety of Lots 121-122 With 10% raise. 124 Tru-Cut 2 Head Resaw with Return 1" x 28" band wheels, 7" x 18' return belt, 7" x 18' feed belt, fully hydraulic, good condition 125 Tru-Cut 2 Head Resaw 1 x 28" band wheels, fully hydraulic, 6" x 13' feed belt, 1 1/4" bands, includes all bands as pictured, some are sharpened 126 Cooks "Cat's Claw" Band Sharpener SN: 0115AUDB4, 110 V plug in, includes extra grinding wheel 127 Wood-Mizer BMT200/250 Band Tooth Setter 110 V plug in, includes control box, in good condition 128 Wood-Mizer Shop Series Band Sharpener 110 V plug in, condition unknown 129 John Deere 4045 Power Unit (1st of an entirety) Model: 4045TF275, SN: PE4045T352933, 82 KW, NACD clutch, control panel, meter reads 14690 hours, includes single phase North Star generator, radiator, includes all exhaust piping 130 Quincy 20hp Air Compressor (Part of an entirety) Includes air lines to tanks and equipment, does not include tanks, includes belts 131 Hydraulic Unit (Part of an entirety) 30 x 60 x 18" tank on stand, dual pumps, cooling unit, includes all hydraulic valves and lines to equipment 132 Power Unit Entirety of Lots 129-131 With 10% raise. 133 52" Dust Blower 24" inlet and outlet, hydraulic drive, uninstalled, in good condition 134 Dust Pipe System Includes all pipe as pictured, (6) 24" pipe, flex hose, elbows, fittings, adaptors, includes pipe installed on ceiling in moulder building 135 Sears Roebuck Table Saw Model: 113.299315, SN: 87302P2092, 10" blade, 27" x 44" table top, hydraulic drive 136 Craftsman Table Saw SN: R901300835, 10" blade, hydraulic drive, 27" x 44" table top 137 Delta Table Saw SN: 17E-061182-2017-21-CT, 10" blade, 110 V plug in, mounted on wheels, 27" x 40" table top 138 Whirlwind Upcut Saw SN: 1604194R, model: 1000R, air cylinder, 12" blade, foot control, no drive 139 Hitachi CB 75F Bandsaw Air powered, 5/8" x 111 1/4" bands, includes extra bands, 2 3/4" x 16" band wheels 140 2 Head Drill Press Air powered, shop built on wheels 141 Delta Drill Press SN: 014420W2080, hydraulic drive, mounted on cart dolly 142 Porter-Cable Drill Press SN: 098285, 110 V plug in, 12 speed 143 Skil 3320 Drill Press SN: 602, 110 V plug in, 10", mounted on wooden stand 144 Weaver Shaper 27" x 39" tabletop, hydraulic drive, 4" cutting head, includes box of parts and tools 150 Skate Rolls 12" x 10' on legs 151 Skate Rolls 18" x 10' 152 Skate Rolls 18" x 10' 153 Skate Rolls 18" x 10' 154 Skate Rolls 18" x 10' 155 Skate Rolls 90°, 12" wide, 52" inside to inside 156 Skate Rolls 18" x 10' 157 Skate Rolls 18" x 4', includes 17" x 3', section of rolls 158 Fros Tek Gas Freezer 15" x 3' x 2' deep storage 159 Mitsubishi 6D-22T Diesel Engine 280 hp at 1800 rpm, 680 cubic inches, needs to be rebuilt, includes clutch, needs to be rebuilt, clutch rebuilt parts included 160 Radiator 2" hose inlet, 27" x 32" x 6" deep 161 Taping Machine Air over 110 V power, 27" x 45" skate rolls, works good 162 Taping Machine Air over 110 V power, 20" x 35" skate rolls, works good 163 Taping Machine Air over 110 V power, parts machine, 29 x 42" rolls 164 Tape 48mm x 914m rolls, 6 rolls/box, 3 full boxes, works for lots 161-163 165 Aluminum Birdhouse Jig 166 Aluminum Birdhouse Jig Includes air lines and valves, staple gun 167 Aluminum Birdhouse Jig 12 x 41" skate roll section 168 Aluminum Birdhouse Jig 169 Aluminum Birdhouse Jig Air hoses and valves 170 Aluminum Birdhouse Jig (3) large drills, air lines and valves 171 Aluminum Birdhouse Jig Air lines and valves, (2) staple guns 172 Aluminum Birdhouse Jig Air lines and valves 172A Staple Guns and Fittings L-staplers, assorted fittings 172B Assorted Staple Guns Fit on aluminum jigs 172C Assorted Staple Guns Fit on aluminum jigs 172D Assorted Staple Guns Fit on aluminum jigs 172E Assorted Staple Guns Fit on aluminum jigs 173 Plastic Bird Feeder Tubes 3 1/2" x 12 1/2", 276 pieces 174 Plastic Bird Feeder Tubes 3 1/2" x 7 3/4", 414/box, 2 boxes, 828 pieces 175 Plastic Bird Feeder Tubes 3 1/2"x 7 3/4", 414/box, 2 full boxes, 108 pieces on top of boxes, 936 pieces total 176 Pallet of Shrink Wrap 18" x 70' rolls, 4 rolls/box, 9 boxes, 36 rolls 177 Pallet of Shrink Wrap 18" x 70' rolls, 4 rolls/box, 9 boxes, 36 rolls 178 Pallet of Shrink Wrap 18" x 70' rolls, 4 rolls/box, 9 boxes, 36 rolls 179 Birdhouses/Feeders 3 pieces 180 Birdhouses/Feeders 2 pieces 181 Birdhouses/Feeders 4 pieces 182 Birdhouses/Feeders 2 pieces 183 Birdhouses/Feeders 3 pieces 184 Birdhouse 1 piece 185 Birdhouses/Feeders 3 pieces 186 Birdhouses/Feeders 3 pieces 187 Birdhouses/Feeders 3 pieces 188 Birdhouses/Feeders 3 pieces 189 Birdhouses/Feeders 3 pieces 190 Birdhouses/Feeders 3 pieces 191 Pallet of Cedar Birdhouse Parts 192 Pallet of Cedar Birdhouse Parts 193 Pallet of Cedar Birdhouse Parts 194 Cedar Birdhouses/Feeders 3 pieces 195 Cedar Birdhouses/Feeders 4 pieces 196 Cedar Birdhouses/Feeders 6 pieces 197 Cedar Birdhouses/Feeders 6 pieces 198 Pallet of Cedar Birdhouse Parts 199 Pallet of Cedar Birdhouse Parts 199A Pallet of Cedar Birdhouse Parts 199B Pallet of Cedar Birdhouse Parts 199C Pallet of Cedar Birdhouse Parts 200 2 Yard Self Dumping Hopper With fork pockets 201 2 Yard Self Dumping Hopper With fork pockets 202 2 Yard Self Dumping Hopper With fork pockets 203 2 Yard Self Dumping Hopper With fork pockets 204 2 Yard Self Dumping Hopper With fork pockets 205 2 Yard Self Dumping Hopper With fork pockets 206 Jet Pallet Jack 6000 lb. capacity, SN: 2000128454, 6 x 48" forks, 27" wide 207 Scissor-Lift Pallet Jack 6 x 46" forks, 27" wide, approx. 5000 lb. capacity 208 Roughneck Pallet Jack 4400 lb. capacity, 6 x 48" forks, 26" wide 210 Lumber Cart 4' x 7' x 32" tall 211 Lumber Cart 42" x 54" x 3' tall 212 Lumber Cart 4' x 7' x 32" tall 11527 213 Lumber Cart 4' x 7' x 32" tall I2HSCKASR71C000040 214 Lumber Cart 44 x 44 x 32" tall 215 Lumber Cart 42 x 48 x 36" tall 216 Lumber Cart 4' x 4' x 3' tall 217 Lumber Cart 40" x 6' x 3' tall 218 Lumber Cart 44" x 7' x 32" tall 219 Lumber Cart 4' x 7' x 32" tall 220 Lumber Cart 4' x 7' x 32" tall 221 Lumber Cart 44" x 4' x 34" tall 222 Chop Saw* 20" blade, 20"x16' dead roll feed, No drive, Line shaft ready, Manual pull down 223 4 Cylinder Diesel Power Unit* Make and Model unknown, No clutch, Was running when last used 225 Stihl MS661C Chainsaw* 20" bar, includes extra bar, works good 226 Stihl MS661C Chainsaw* 20" bar, works good 227 Stihl MS661C Chainsaw* 20" bar, works good 228 Stihl MS500i Chainsaw* 20" bar, works good 229 Stihl MS500i Chainsaw* 20" bar, works good 230 Husquarna 390XP Chainsaw* 18" bar, works good 231 Husquarna 390XP Chainsaw* 18" bar, works good 232 Husquarna 390XP Chainsaw* 18" bar, works good 250 2014 Bobcat S750 Skid Steer SN: ATDZ13401 Meter reads: 2,359 hours Engine: Bobcat 3.4L turbo diesel-Tier 4 HP: 85 Fuel type: Diesel ROPS: Fully enclosed cab with heat, AC, and radio 2 Speed: Yes Highflow: Yes Lift capacity: 3,200 lb Attachments: No Features and Notes: Hand and foot controls, does not include tracks, or any attachments, 12-16.5 tires, runs and operates well 251 Bobcat Over-Wheel Skid Steer Tracks 15' wide, was used on lot # 250, on 12-16.5 tires, in good condition 252 Bobcat 80" Heavy Duty Bucket Standard quick attach, Part # 7272681 253 85" Brush Grapple Standard quick attach, 2 hose hydraulic hookup, in good condition 254 Over Tire Skid Steer Tracks 14" wide 254A Bobcat Skid Steer Tires with Rims* 2 tires, 10-16.5, 8 lug 255 Crown C-5 Forklift SN: 9A199730 Meter reads: 6,227 hours Engine: 4 cylinder Fuel type: LP Load capacity: 5,200 lb Stage mast: 3 stage Mast height: 86", 45" wide Side shift: Yes Fork positioner: No ROPS: Open cab Tire size: 28 x 9-15 on front, 6.5-10 on rear Tires: Solid Features and Notes: Machine weighs 10,700 lb, 5 x 48" forks, runs and operates good. 256 Toyota 8FGCU25 Forklift SN: 30729 Meter reads: 6,773 hours Engine: Toyota Fuel type: LP Load capacity: 4800 lb Stage mast: 3 stage Mast height: 82" tall x 38" wide Side shift: Yes Fork positioner: Yes ROPS: Open cab Tire size: 533/178-381 on front, 406/152-266.7 on rear Tires: Solid Features and Notes: 5 x 42" forks, runs and operates well 257 Toyota Forlift Model: 526FGCU30 SN: 60519 Meter reads: 10,826 hours Engine: Toyota Fuel type: LP Load capacity: 6,000 lb Stage mast: 2 stage Mast height: 86" Side shift: Yes Fork positioner: No ROPS: Open cab Tire size: 21 x 8 x 15 on front, 16 x 6 x 10.5 on rear Tires: Solid Features and Notes: 5 x 42" forks, runs and operates well. Engine does overheat after an hour of steady use. 260 John Deere 650G Dozer SN: T0650GH767318 Meter reads: 9,705 hours Engine: John Deere 4045 Fuel type: Diesel Blade: 104" 6 way ROPS: Open A/C: No Heater: No Features and Notes: 18" tracks, 4 speed Power Shift transmission, winch with 5/8" cable, good under carriage, runs and operates great. 265 John Deere 648G Grapple Skidder PIN: DW648GX558797, meter reads: 16,703 hours, fully enclosed cab, 8 speed power-shift transmission, 88" blade, winch with 3/4" cable, 10' max width grapple, 30.5R32 tires, includes tire chains for w tires, John Deere 6,068 diesel engine 266 1990 Timberjack 240A Cable Skidder SN: CT7299, 4 speed manual transmission, 6 cylinder Deutz diesel engine, 82" blade, 18.4-26 tires, in good condition, Gearmatic winch with 1/2" cable (SN: 11933431-W52040) 269 Skidder Tires and Rims 23.1-26, 12 lugs, fits on lot 266, 4 tires 270 Barko 275B TRK Knuckleboom SN: 21154 Meter reads: 876 hours Engine: John Deere 4045 Fuel type: Diesel Continuous Grapple: Yes Trailer: Pitts Delimber: No Bucksaw Hookups: Yes A/C: No Heater: No Features and Notes: Fires right up and runs, pilot joystick controls. 271 Bucksaw Direct drive, 48" bar, 52" x 12' log rack, in good condition 275 1994 Freightliner Log Truck VIN: 1FVXFDYB8RH482973 Meter reads: 693,435 miles Engine: Cummins N14 Transmission: 13 speed Eaton Fuller Log loader: Rotobec 80 Elite (SN: 10800100-030185) Suspension: Henrik Rubber Block GVWR: Approx. 66,000 lb Heat/AC: Yes Full lock in rears: Unknown Double frame: Yes Features and Notes: Has continuous grapple, starts and runs good, loader operates as it should, 88" x 88" log bunks, 22' long log rack, 11R24.5 tires on 2 rear axles, 385/65R22.5 tires on front. Driver door does not open, latch is busted, there is a blown hose on the loader grapple. Has title but will be a delay 276 2001 Navistar 9900iX Semi Truck VIN: 2HSCKASR71E000040 Meter reads: 586,514 miles Engine: CAT 6NZ less than 4,000 miles since rebuild Transmission: 13 speed Eaton Fuller GVWR: 52,000 lb Front axle rating: 12,000 lb. Rear axle rating: 20,000 lb Heat/AC: Yes Wet kit: No Features and Notes: 260" WB, 64" sleeper, 285/75R24.5 tires, runs and drives great. Fan clutch on engine is not working. Has a title but there will be a delay 280 2014 Pitts Log Trailer VIN: 5JYLT3629FP150172, GVWR: 80,000 lb., GAWR: 24,000 lb, 6 bunk, center point suspension, 11R24.5 tires, includes straps, 92" wide x 87" tall bunks, 38' long, good condition, has rack on front. Has a title but there will be a delay 281 1977 Nelson Lo-Boy Trailer SN: 3611, Model: WBT-30F, rated at 60000 lb, 8' x 21' main deck, 3' dovetail, 2' x 32" ramps, 38' long overall 282 Wells Cargo 10' Construction Trailer VIN: 1WC200D1411095084, 2" ball, 5 lug axle, ST205/75R15 tires, 14'6" long overall, ladder racks on both sides and top, lots of shelving inside, includes spare tire and contents of trailer. Has title 283 Flatbed Gooseneck Trailer* 7' x 18' main deck, 2' dovetail, 14" x 5' ramps, 28'6" long overall, ST235/80R16 tires, 8 lug axles, has wiring for trailer lights and brakes. No title, bill of sale only 296 Scag Walk Behind Mower* 48" deck, 14 hp Kohler engine, SN: 19160363, Model: SW48-14KH, good working mower 297 500 Gallon Diesel Fuel Tank 4' x 6' long 298 Log Bunks 1 piece, 8' x 8' x 5' tall, ready to bolt on 299 300 Gallon Diesel Fuel Tank on Skids 12 V Gasboy fuel pump, model: 620B-DSL 300 Emglo Air Compressor SN: 07269105, 8 hp Honda motor 301 Quincy 340 Air Compressor SN: 6132198, no drive, worked well when removed 302 Worthington Air Compressor SN: ED9803, Honda GX 270 motor, 2' x 64" tank, size 4 7/8 x 2 7/8 x 2 1/8 303 Hydraulic Unit Honda GX 270 gas motor, 15 x 21 x 5" tank, pump and valves 304 Hydraulic Unit 10 hp electric motor, 22 x 29 x 16" tank 305 Electric Motors and Gearboxes (2) 2 hp with gearboxes, (1) unknown hp with hydraulic pump 306 Electric Motors (2) 20 hp, (1) 3 hp with gearbox, electrical box and controls 307 Radiator Unit 40 x 48" 308 Radiator Unit 36" x 42" 309 Radiator Unit 34" x 42" 310 PAC Auto Strapping Machine Model: PSM1412-1C3A, 110 plug in, 3/8" poly banding 311 Banding Cart 1/2" poly banding, crimper and strapping tool included 312 Chop Saws (4) Hitachi saws, all selling as parts saws 313 Chop Saws (3) Kobalt saws selling for parts, DeWalt saw is hydraulic drive and works 314 Drill Propelled Tre stand 36" x 42" platform, designed for wheel chair to be driven onto platform and "climb" up the stand 315 Cart and Stands Cart with aluminum jig part fasteners and tape, 2 adjustable stands 316 2 Gas Jugs and Cant Hook (2) 5 gallon jugs, 60" cant hook 317 Milwaukee 10 1/4" Circle Saw SN: B49AD1828-00056, 110 V plug in, includes case 317A Northern Tool Pipe Threader SN: 002, 1/2"-2", 110 V plug in, works good 317B Horse Drawn Cultivator 5 tooth, single horse 317C Tinned Meat Mauler Powered by 3 1/2 hp Honda motor 317D Honda GX160 Motor 5 1/2 hp 317E School Desk and Chair 20 x 24", desktop 317F Hand Tools* 4" bench vise, hay hook, sledge hammer head, potato planter 318 Delta Dust Collector Converted to hydraulic drive, 10" blower, (4) 4" inlet pipe, 2 bag collector, on wheels 318A Banding 1/2" poly banding, 600 lb./box, 7 new boxes, 1/2" seals-1000/box, 6 boxes, includes crimper 318B Scaffolding (10) cross braces, 80" long, (12) 5' x 5' tall legs, planks not included 319 Sawblades and Belts Assorted motor belts, new and used 10-12" sawblades, new hydraulic pump 320 Work Bench and LP Cabinet 14 x 28 x 30" LP storage cabinet, 21 x 42 x 56" tall workbench 321 Box Fans (7) 18" box fans-110 plug in wiring, poly banding, hose clamps, jig parts 322 Pallet of Misc. Chainsaw safety clothing, toolbox, antique glass bottles, rubber counter weights 323 Pallet of Tools Corded DeWalt drills, air nailers, and staplers 324 Honda Motor and Magnet Rollers Motor size unknown 325 Pallet of Assorted Fasteners Pole barn spikes, framing nails, metal screws 326 Pallet of Tools 10" Kobalt chop saw, skill saws, Sawzall, bench grinder, Bosch hammer drill, Skil router table 327 Pallet of Assorted Fasteners Pole barn spikes, metal screws 328 Pallet of Assorted Fasteners Metal screws, 16D hand nails 329 Pallet of Assorted Fasteners Metal screws 330 Pallet of Assorted Fasteners Metal screws, pole barn spikes, 16D nails 331 Air Powered Drum Fan Mounted on wheels 332 2 Floor Fans Both 24" air powered 333 2 Floor Fans Both 24" air powered 334 Box Fan Air powered, 36" fan, 44 x 44" box 335 2 Floor Fans Air powered both 24" 336 12 V Light Stands (4) stands, have all wiring to run lights off 12 V batteries, 6' tall, mounted on wheels 337 Pallet of Fasteners Assorted staples 338 Pallet of Parts PVC fittings, jig parts, screws 339 Pallet of Misc. Mailbox, DeWalt tools 340 Pallet of Misc. Zip ties, parts, drill bits, grease gun 341 Pallet of Misc. DeWalt battery nail gun-needs work, done on driver, creeper, assorted staples, scales 342 Pallet of Misc. Air sanders, air lines, cylinders, bolts, chain, fittings 343 Pallet of Aluminum Jig Parts 344 Pallet of Clear Packing Tape 48mm x 50m rolls, 96 rolls/box, 8 full boxes 345 Bird Feeder Parts Feeder wire, tape 346 Assorted Rubber Floor Mats 347 Assorted Air Hose and 3 Chairs 348 Pallet of Misc. Small tool sets, parts 349 Pallet of Hand Tools Handsaws, milk jug, hedge trimmer, plow seats, battery weed-eater 350 Pallet of Hydraulic Parts 351 Pallet of Misc. Plow handles, large bird box, box of tape, assorted fasteners 352 2 Wall Heaters (1) gas, (1) electric 352A Pallet of Parts* Hose fittings, hydraulic fittings, hose clamps, (4) 10' sections of 6" flex hose, (1) section 5", (2) sections 4" 352B Pallet of Hydraulic Parts* Pumps, valves, pulleys, jig parts, (3) 7" conveyor belts 380 Hunting Blind 44" x 44" x 6' tall, windows on all sides 381 Round Bale Feeder 101" x 104" x 53" tall 382 Hay Feeder 52" x 10' x 80" tall 383 Enclosed Feeder 4' x 54" x 6' tall, on skids, has roof 384 Enclosed Feeder 4' x 54" x 6' tall, on skids, has roof 385 Pioneer Horse Cart P225/75R16 tires, 34 x 40" platform with seat, needs new shaft 386 IH 200 Manure Spreader 1/2" x 8'6" x 16" deep, works 386A Fuel Tank and T-Posts 28 x 44 x 60" long fuel tank-has a few holes, approx. 25 assorted t-posts 387 Livestock Waterer Mounted on 6" x 5' concrete slab 388 Livestock Waterer Mounted on 6" x 5' concrete slab, Ritchie Thrifty-King CT2-2000 389 Livestock Waterer Mounted on 6" x 5' concrete slab, Ritchie Thrifty-King CT2-2000 390 Round Hay Feeder* 8' x 45" tall 391 Round Hay Feeder* 8' x 45" tall 392 Skate Rolls* 19" x 10'8", 2 x 15 1/2" rolls, varied spacing 399 3 Schwinn Bikes and Bike Cart (3) 7 speed bikes, (1) child carrier cart 400 Rough Cut Cherry Table Top Slab 25-30" wide x 85" long, 2" thick 401 Rough Cut Cherry Table Top Slab 28" x 7' x 2" 402 Rough Cut Cherry Table Top Slab 30" x 7' x 2" 403 Rough Cut Cherry Table Top Slab 30" x 7' x 2" 404 Rough Cut Cherry Table Top Slab 30" x 7' x 2" 405 Rough Cut Walnut Slabs 4 pieces, 18-20" wide, 80-84" long, 2" thick 406 Rough Cut Walnut Lumber 9-12" wide, 8'6"-12'6" long, 1" thick, 6 pieces 407 Rough Cut Walnut Lumber 5 1/2-10" wide, 7'-12' long, 1-1 1/4" thick, approx. 390 board foot 407A Rough Cut Cedar Lumber* Approx. 616 BF, 4 1/2-28" wide, 9' long, 1" thick 407B Rough Cut Cedar Tabletop Slab* 26 x 102 x 2 1/2" thick 407C Rough Cut Cedar Tabletop Slab* 20 X 102 x 2 1/4" thick 407D Rough Cut Cedar Tabletop Slab* 23 x 102 x 2" thick 407E Rough Cut Cedar Tabletop Slab* 26 x 102 x 2 1/4" thick 407F Rough Cut Cedar Tabletop Slab* 27 x 102 x 2 1/8" thick 407G Rough Cut Cedar Tabletop Slab* 24 x 102 x 2" thick 407H Rough Cut Cedar Tabletop Slab* 20 X 102 X 2 1/4" thick 408 Cedar Firewood Blocks 3 1/2 x 3 1/2 x 20" long, approx. 1000-1100 pieces 409 Cedar Firewood Blocks 3 1/2 x 3 1/2 x 20" long, approx. 1000-1100 pieces 410 Cedar Firewood Blocks 3 1/2 x 3 1/2 x 20" long, approx. 1000-1100 pieces 411 Stacking Sticks 3/4 x 1 1/4 x 39", approx. 1500 pieces 412 Cedar Firewood Blocks 3 1/2 x 3 1/2 x 27" long, approx. 350 pieces 413 Cedar Cribbage Blocks 3 1/2 x 3 1/2 x 40" long, approx. 250 pieces 414 Cedar Cribbage Blocks* 3 1/2 x 3 1/2 x 42", approx. 260 pieces

Close X

Gallery Images Loading, Please Wait...

Close X

Save this sale to your Saved Sales list!

Your Saved Sales list is an easy way to return to sale listings which are of interest to you.

Login

Username:

Password:

Sign Up

FREE EMAIL NOTIFICATIONS
auction listings delivered to your inbox

Close X

Sign Up

FREE EMAIL NOTIFICATIONS
auction listings delivered to your inbox

Login

Username:

Password:

Return

Schrock Woodworking

Live Auction

View Gallery (294)

Auction Date(s)

Saturday Aug 5, 2023 Completed

Auction Location

Mays Lick, KY 41055

View Map

Company

Bright Star Realty and Auctions, INC

Contact: Loren Beachy
Phone: 574-825-0704
Website: brightstarauctions.com

Listing Terms and Conditions

Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded where required.
Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer:

Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.
Governing Law.
1. For Auctions in the State of Indiana and Online. Unless otherwise indicated, all Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are deemed to be entered into in the State of Indiana, all bids and payments are deemed to be received in the State of Indiana, and the contract, if any, will be deemed to be formed and entered into in the State of Indiana.
Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.
Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
Nature of the Auction. This Property is being sold at the Auction in the manner indicated on the first page of this Agreement.
Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
2. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
3. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
4. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
5. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
6. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
7. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
8. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.
9. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties, (i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
10. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
11. No Reduction or Retraction of Online Bids. Online bids may not be reduced or retracted.
12. Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.

1. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.
Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). All prebids and maxbids placed online are considered absentee bids. Auctioneer pledges complete integrity in the treatment of absentee bids and absentee bids may be initiated and advanced in accordance with Auctioneer’s policies and procedures. Auctioneer has the right to initiate any absentee bids at 25% to 50% of their maximum amount. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot of Personal Property will be the Buyer of such Property.
All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.

Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or representation by Auctioneer.
Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ringman, or multiple bid assistants or ringmen, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked-Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases are due upon receipt of your invoice. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. If onsite bidders wish to send a wire, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.
Wire Transfer Payments. Buyer shall obtain verbal verification of all bank account information from Bright Star Auctions prior to initiating transfer. Except as otherwise provided by law, we shall not be liable for any loss or damage due to misplaced, unauthorized or fraudulent fund transfers.
ACH/eCheck Payments. By providing account information to Bright Star Auctions, buyer gives permission for Bright Star Auctions to retain payment information on file and represents they are the authorized account holder. Upon authorization to collect payment from Buyers account and prior to transfer, Buyer is responsible to notify their financial institution of the impending transaction. Buyer agrees to notify Bright Star Auctions of any changes in account information.
Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.

No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Tools, packing material, and/or assistance will not be supplied at Pickup, so Buyer must plan accordingly. Disassembly and removal shall be done in a quiet and workmanlike manner, and each Buyer, in making its bid, shall thereby indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer’s employees, agents, representatives, or independent contractors in connection with the Pickup. Any and all damages to the Pickup site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller. Each Buyer must show a copy of the invoice (digital or hard copy) and government-issued photo identification before Lots will be released. No Buyer shall bring pets or young children to the Pickup, as the movement of Lots presents an extremely high-risk environment that could result in injury or death.
Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them. In addition, Buyer’s bidding privileges may be suspended at future auctions.
Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.
Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled to specific performance or other equitable relief.
Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim or suit relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their rights.

MR Schrock will be relocating and have made the decision to liquidate their quality business assets at public auction. Most of this equipment is turn key and ready to go to work for you!

Preview Information
Day before or by appointment only. Contact Eugene 574-242-1100
Location of auction: 6173 Flat Fork Rd, Mays Lick, KY 41055

Loadout Information
Date: 8/5 and 8/7-8/8 Time: 8 AM - 4 PM Contact Kevin Nisley 574-202-6154

Heavy Equipment Key Set 36 Keys
Shipping available for $20

Manual Sealless Steel Strapping Tool
Model A333, works for 1/2" 5/8" or 3/4" banding, new in box. Shipping available for $30

1/16 Scale Die Cast Metal Fordson Tractor
New in box

1/16 Scale Die Cast Metal Farmall Cub Tractor
New in box

1/16 Scale John Deere Die-Cast Metal 1934 Model
New in box

Hand Crank 1 Quart Butter Churn

Hand Crank 3 Quart Butter Churn

Hand Crank 2 Quart Butter Churn

Steel Toy Ladder Carriage

Steel Toy Circus Carriage

Cedar Table and Chairs
4 chairs, 20" x 76" table, live slab tops with clear Epoxy finish

100

100A

Bands for Scragg
Approx. 50 brand new bands, 1 1/2" x 13'8"

101

Belt Conveyor
Hydraulic drive, 24" belt, 9" sides, 29" x 22'

102

Belt Conveyor
Hydraulic drive, 35" belt, 4' x 22'

103

2 Strand Log Deck with Stop'N'Load
Hydraulic drive, hydraulic cylinder on loading arm, 6' x 22'

104

3 Strand Transfer Deck
Hydraulic drive, C55B rooftop chain, 32" x 35'6"

105

105A

56" x 16' Steel Frame

106

Air Compressor
(Part of an entirety) Runs off lot # 105, Model: 41P0119, includes air tank, valves, and all lines to equipment

107

Hydraulic Unit
(Part of an entirety) 31 x 70 x 36" tank, includes all valves, pumps, and hydraulic lines to and from tank to equipment, intake hose fittings leak slightly

108

Power Unit Entirety of Lots 105-107
With 10% raise.

109

500 Gallon Diesel Fuel Tank
46" x 75" long, includes fuel lines to engine

110

Zimmerman Bandmill
7' x 24', 31 hp Vanguard gas motor, meter reads 227 hours, 1 x 24" band wheels, 1 1/2" bands, 36" width capacity, in excellent condition, 15'6" long bands

111

Bands for Zimmerman
Approx. 32 new blades, approx. 35 used blades, 1 1/2" x 15'6", 7/8" tooth spacing

112

113

500 Gallon Diesel Fuel Tank
4' x 75" long, includes fuel lines to engine

114

175 Gallon Diesel Fuel Tank
Includes stand, 27 x 44 x 60" long

115

500 Gallon Air Tank
Includes all air lines to equipment and other tank

116

500 Gallon Air Tank
No air line included

117

117A

Tongue and Groove Moulder Heads
5 heads total, 1 1/2'' spindle, 2 spiral carbide, tooth heads, includes lots of new teeth

117B

Moulder Heads
7 heads total, 1 1/2'' spindle, used for making 3 1/2" x 3 1/2" mailbox posts

117C

Assorted Moulder Heads
9 heads total, 1 1/2'' spindle

117D

Assorted Moulder Heads
9 heads total, 1 1/2'' spindle

117E

Main Moulder Heads
1 1/2'' spindle, Main top and bottom cutting heads, spiral carbide tooth style, includes 2 boxes of new inserts

117F

Assorted Moulder Heads
1 1/2'' spindle, 9 heads total

117G

Moulder Parts
Wrenches, spacers, belts

117H

Moulder Heads and Blades
3 heads and lots of ripping blocks

117I

Moulder Parts
Lots of assorted parts

117J

Moulder Parts
Knives, profiles, gear wheels, new feed rolls

117K

Moulder Parts
Lots of knives and profiles

117L

Storage Bench for Moulder
Made to organize heads, spacers, saws, and knives. 32 x 38 x 60" tall

118

Metabo 12" Chop Saw
110 V plug in, 12" x 5' skate rolls, includes table

119

Kobalt 12" Chop Saw
SN: 052665, 12" x 5' skate rolls, 110 V plug in, includes table

119A

12" DeWalt Chop Saw with Bench
Converted to hydraulic power, 18" x 9' bench

120

DeWalt 12" Chop Saw
SN: 263715, 110 V plug in, includes table

121

122

Hydraulic Unit
(Part of an entirety) Piggyback pump, hydraulic valve station, 24 x 54 x 48" tank, includes all hydraulic lines to equipment

123

Power Unit Entirety of Lots 121-122
With 10% raise.

124

Tru-Cut 2 Head Resaw with Return
1" x 28" band wheels, 7" x 18' return belt, 7" x 18' feed belt, fully hydraulic, good condition

125

Tru-Cut 2 Head Resaw
1 x 28" band wheels, fully hydraulic, 6" x 13' feed belt, 1 1/4" bands, includes all bands as pictured, some are sharpened

126

Cooks "Cat's Claw" Band Sharpener
SN: 0115AUDB4, 110 V plug in, includes extra grinding wheel

127

Wood-Mizer BMT200/250 Band Tooth Setter
110 V plug in, includes control box, in good condition

128

Wood-Mizer Shop Series Band Sharpener
110 V plug in, condition unknown

129

130

Quincy 20hp Air Compressor
(Part of an entirety) Includes air lines to tanks and equipment, does not include tanks, includes belts

131

Hydraulic Unit
(Part of an entirety) 30 x 60 x 18" tank on stand, dual pumps, cooling unit, includes all hydraulic valves and lines to equipment

132

Power Unit Entirety of Lots 129-131
With 10% raise.

133

52" Dust Blower
24" inlet and outlet, hydraulic drive, uninstalled, in good condition

134

Dust Pipe System
Includes all pipe as pictured, (6) 24" pipe, flex hose, elbows, fittings, adaptors, includes pipe installed on ceiling in moulder building

135

Sears Roebuck Table Saw
Model: 113.299315, SN: 87302P2092, 10" blade, 27" x 44" table top, hydraulic drive

136

Craftsman Table Saw
SN: R901300835, 10" blade, hydraulic drive, 27" x 44" table top

137

Delta Table Saw
SN: 17E-061182-2017-21-CT, 10" blade, 110 V plug in, mounted on wheels, 27" x 40" table top

138

Whirlwind Upcut Saw
SN: 1604194R, model: 1000R, air cylinder, 12" blade, foot control, no drive

139

Hitachi CB 75F Bandsaw
Air powered, 5/8" x 111 1/4" bands, includes extra bands, 2 3/4" x 16" band wheels

140

2 Head Drill Press
Air powered, shop built on wheels

141

Delta Drill Press
SN: 014420W2080, hydraulic drive, mounted on cart dolly

142

Porter-Cable Drill Press
SN: 098285, 110 V plug in, 12 speed

143

Skil 3320 Drill Press
SN: 602, 110 V plug in, 10", mounted on wooden stand

144

Weaver Shaper
27" x 39" tabletop, hydraulic drive, 4" cutting head, includes box of parts and tools

150

Skate Rolls
12" x 10' on legs

151

Skate Rolls
18" x 10'

152

Skate Rolls
18" x 10'

153

Skate Rolls
18" x 10'

154

Skate Rolls
18" x 10'

155

Skate Rolls
90°, 12" wide, 52" inside to inside

156

Skate Rolls
18" x 10'

157

Skate Rolls
18" x 4', includes 17" x 3', section of rolls

158

Fros Tek Gas Freezer
15" x 3' x 2' deep storage

159

Mitsubishi 6D-22T Diesel Engine
280 hp at 1800 rpm, 680 cubic inches, needs to be rebuilt, includes clutch, needs to be rebuilt, clutch rebuilt parts included

160

Radiator
2" hose inlet, 27" x 32" x 6" deep

161

Taping Machine
Air over 110 V power, 27" x 45" skate rolls, works good

162

Taping Machine
Air over 110 V power, 20" x 35" skate rolls, works good

163

Taping Machine
Air over 110 V power, parts machine, 29 x 42" rolls

164

Tape
48mm x 914m rolls, 6 rolls/box, 3 full boxes, works for lots 161-163

165

Aluminum Birdhouse Jig

166

Aluminum Birdhouse Jig
Includes air lines and valves, staple gun

167

Aluminum Birdhouse Jig
12 x 41" skate roll section

168

Aluminum Birdhouse Jig

169

Aluminum Birdhouse Jig
Air hoses and valves

170

Aluminum Birdhouse Jig
(3) large drills, air lines and valves

171

Aluminum Birdhouse Jig
Air lines and valves, (2) staple guns

172

Aluminum Birdhouse Jig
Air lines and valves

172A

Staple Guns and Fittings
L-staplers, assorted fittings

172B

Assorted Staple Guns
Fit on aluminum jigs

172C

Assorted Staple Guns
Fit on aluminum jigs

172D

Assorted Staple Guns
Fit on aluminum jigs

172E

Assorted Staple Guns
Fit on aluminum jigs

173

Plastic Bird Feeder Tubes
3 1/2" x 12 1/2", 276 pieces

174

Plastic Bird Feeder Tubes
3 1/2" x 7 3/4", 414/box, 2 boxes, 828 pieces

175

Plastic Bird Feeder Tubes
3 1/2"x 7 3/4", 414/box, 2 full boxes, 108 pieces on top of boxes, 936 pieces total

176

Pallet of Shrink Wrap
18" x 70' rolls, 4 rolls/box, 9 boxes, 36 rolls

177

Pallet of Shrink Wrap
18" x 70' rolls, 4 rolls/box, 9 boxes, 36 rolls

178

Pallet of Shrink Wrap
18" x 70' rolls, 4 rolls/box, 9 boxes, 36 rolls

179

Birdhouses/Feeders
3 pieces

180

Birdhouses/Feeders
2 pieces

181

Birdhouses/Feeders
4 pieces

182

Birdhouses/Feeders
2 pieces

183

Birdhouses/Feeders
3 pieces

184

Birdhouse
1 piece

185

Birdhouses/Feeders
3 pieces

186

Birdhouses/Feeders
3 pieces

187

Birdhouses/Feeders
3 pieces

188

Birdhouses/Feeders
3 pieces

189

Birdhouses/Feeders
3 pieces

190

Birdhouses/Feeders
3 pieces

191

Pallet of Cedar Birdhouse Parts

192

Pallet of Cedar Birdhouse Parts

193

Pallet of Cedar Birdhouse Parts

194

Cedar Birdhouses/Feeders
3 pieces

195

Cedar Birdhouses/Feeders
4 pieces

196

Cedar Birdhouses/Feeders
6 pieces

197

Cedar Birdhouses/Feeders
6 pieces

198

Pallet of Cedar Birdhouse Parts

199

Pallet of Cedar Birdhouse Parts

199A

Pallet of Cedar Birdhouse Parts

199B

Pallet of Cedar Birdhouse Parts

199C

Pallet of Cedar Birdhouse Parts

200

2 Yard Self Dumping Hopper
With fork pockets

201

2 Yard Self Dumping Hopper
With fork pockets

202

2 Yard Self Dumping Hopper
With fork pockets

203

2 Yard Self Dumping Hopper
With fork pockets

204

2 Yard Self Dumping Hopper
With fork pockets

205

2 Yard Self Dumping Hopper
With fork pockets

206

Jet Pallet Jack
6000 lb. capacity, SN: 2000128454, 6 x 48" forks, 27" wide

207

Scissor-Lift Pallet Jack
6 x 46" forks, 27" wide, approx. 5000 lb. capacity

208

Roughneck Pallet Jack
4400 lb. capacity, 6 x 48" forks, 26" wide

210

Lumber Cart
4' x 7' x 32" tall

211

Lumber Cart
42" x 54" x 3' tall

212

Lumber Cart
4' x 7' x 32" tall

11527

213

Lumber Cart
4' x 7' x 32" tall

I2HSCKASR71C000040

214

Lumber Cart
44 x 44 x 32" tall

215

Lumber Cart
42 x 48 x 36" tall

216

Lumber Cart
4' x 4' x 3' tall

217

Lumber Cart
40" x 6' x 3' tall

218

Lumber Cart
44" x 7' x 32" tall

219

Lumber Cart
4' x 7' x 32" tall

220

Lumber Cart
4' x 7' x 32" tall

221

Lumber Cart
44" x 4' x 34" tall

222

Chop Saw*
20" blade, 20"x16' dead roll feed, No drive, Line shaft ready, Manual pull down

223

4 Cylinder Diesel Power Unit*
Make and Model unknown, No clutch, Was running when last used

225

Stihl MS661C Chainsaw*
20" bar, includes extra bar, works good

226

Stihl MS661C Chainsaw*
20" bar, works good

227

Stihl MS661C Chainsaw*
20" bar, works good

228

Stihl MS500i Chainsaw*
20" bar, works good

229

Stihl MS500i Chainsaw*
20" bar, works good

230

Husquarna 390XP Chainsaw*
18" bar, works good

231

Husquarna 390XP Chainsaw*
18" bar, works good

232

Husquarna 390XP Chainsaw*
18" bar, works good

250

251

Bobcat Over-Wheel Skid Steer Tracks
15' wide, was used on lot # 250, on 12-16.5 tires, in good condition

252

Bobcat 80" Heavy Duty Bucket
Standard quick attach, Part # 7272681

253

85" Brush Grapple
Standard quick attach, 2 hose hydraulic hookup, in good condition

254

Over Tire Skid Steer Tracks
14" wide

254A

Bobcat Skid Steer Tires with Rims*
2 tires, 10-16.5, 8 lug

255

256

257

260

265

266

269

Skidder Tires and Rims
23.1-26, 12 lugs, fits on lot 266, 4 tires

270

271

Bucksaw
Direct drive, 48" bar, 52" x 12' log rack, in good condition

275

276

280

281

1977 Nelson Lo-Boy Trailer
SN: 3611, Model: WBT-30F, rated at 60000 lb, 8' x 21' main deck, 3' dovetail, 2' x 32" ramps, 38' long overall

282

283

Flatbed Gooseneck Trailer*
7' x 18' main deck, 2' dovetail, 14" x 5' ramps, 28'6" long overall, ST235/80R16 tires, 8 lug axles, has wiring for trailer lights and brakes. No title, bill of sale only

296

Scag Walk Behind Mower*
48" deck, 14 hp Kohler engine, SN: 19160363, Model: SW48-14KH, good working mower

297

500 Gallon Diesel Fuel Tank
4' x 6' long

298

Log Bunks
1 piece, 8' x 8' x 5' tall, ready to bolt on

299

300 Gallon Diesel Fuel Tank on Skids
12 V Gasboy fuel pump, model: 620B-DSL

300

Emglo Air Compressor
SN: 07269105, 8 hp Honda motor

301

Quincy 340 Air Compressor
SN: 6132198, no drive, worked well when removed

302

Worthington Air Compressor
SN: ED9803, Honda GX 270 motor, 2' x 64" tank, size 4 7/8 x 2 7/8 x 2 1/8

303

Hydraulic Unit
Honda GX 270 gas motor, 15 x 21 x 5" tank, pump and valves

304

Hydraulic Unit
10 hp electric motor, 22 x 29 x 16" tank

305

Electric Motors and Gearboxes
(2) 2 hp with gearboxes, (1) unknown hp with hydraulic pump

306

Electric Motors
(2) 20 hp, (1) 3 hp with gearbox, electrical box and controls

307

Radiator Unit
40 x 48"

308

Radiator Unit
36" x 42"

309

Radiator Unit
34" x 42"

310

PAC Auto Strapping Machine
Model: PSM1412-1C3A, 110 plug in, 3/8" poly banding

311

Banding Cart
1/2" poly banding, crimper and strapping tool included

312

Chop Saws
(4) Hitachi saws, all selling as parts saws

313

Chop Saws
(3) Kobalt saws selling for parts, DeWalt saw is hydraulic drive and works

314

Drill Propelled Tre stand
36" x 42" platform, designed for wheel chair to be driven onto platform and "climb" up the stand

315

Cart and Stands
Cart with aluminum jig part fasteners and tape, 2 adjustable stands

316

2 Gas Jugs and Cant Hook
(2) 5 gallon jugs, 60" cant hook

317

Milwaukee 10 1/4" Circle Saw
SN: B49AD1828-00056, 110 V plug in, includes case

317A

Northern Tool Pipe Threader
SN: 002, 1/2"-2", 110 V plug in, works good

317B

Horse Drawn Cultivator
5 tooth, single horse

317C

Tinned Meat Mauler
Powered by 3 1/2 hp Honda motor

317D

Honda GX160 Motor
5 1/2 hp

317E

School Desk and Chair
20 x 24", desktop

317F

Hand Tools*
4" bench vise, hay hook, sledge hammer head, potato planter

318

Delta Dust Collector
Converted to hydraulic drive, 10" blower, (4) 4" inlet pipe, 2 bag collector, on wheels

318A

Banding
1/2" poly banding, 600 lb./box, 7 new boxes, 1/2" seals-1000/box, 6 boxes, includes crimper

318B

Scaffolding
(10) cross braces, 80" long, (12) 5' x 5' tall legs, planks not included

319

Sawblades and Belts
Assorted motor belts, new and used 10-12" sawblades, new hydraulic pump

320

Work Bench and LP Cabinet
14 x 28 x 30" LP storage cabinet, 21 x 42 x 56" tall workbench

321

Box Fans
(7) 18" box fans-110 plug in wiring, poly banding, hose clamps, jig parts

322

Pallet of Misc.
Chainsaw safety clothing, toolbox, antique glass bottles, rubber counter weights

323

Pallet of Tools
Corded DeWalt drills, air nailers, and staplers

324

Honda Motor and Magnet Rollers
Motor size unknown

325

Pallet of Assorted Fasteners
Pole barn spikes, framing nails, metal screws

326

Pallet of Tools
10" Kobalt chop saw, skill saws, Sawzall, bench grinder, Bosch hammer drill, Skil router table

327

Pallet of Assorted Fasteners
Pole barn spikes, metal screws

328

Pallet of Assorted Fasteners
Metal screws, 16D hand nails

329

Pallet of Assorted Fasteners
Metal screws

330

Pallet of Assorted Fasteners
Metal screws, pole barn spikes, 16D nails

331

Air Powered Drum Fan
Mounted on wheels

332

2 Floor Fans
Both 24" air powered

333

2 Floor Fans
Both 24" air powered

334

Box Fan
Air powered, 36" fan, 44 x 44" box

335

2 Floor Fans
Air powered both 24"

336

12 V Light Stands
(4) stands, have all wiring to run lights off 12 V batteries, 6' tall, mounted on wheels

337

Pallet of Fasteners
Assorted staples

338

Pallet of Parts
PVC fittings, jig parts, screws

339

Pallet of Misc.
Mailbox, DeWalt tools

340

Pallet of Misc.
Zip ties, parts, drill bits, grease gun

341

Pallet of Misc.
DeWalt battery nail gun-needs work, done on driver, creeper, assorted staples, scales

342

Pallet of Misc.
Air sanders, air lines, cylinders, bolts, chain, fittings

343

Pallet of Aluminum Jig Parts

344

Pallet of Clear Packing Tape
48mm x 50m rolls, 96 rolls/box, 8 full boxes

345

Bird Feeder Parts
Feeder wire, tape

346

Assorted Rubber Floor Mats

347

Assorted Air Hose and 3 Chairs

348

Pallet of Misc.
Small tool sets, parts

349

Pallet of Hand Tools
Handsaws, milk jug, hedge trimmer, plow seats, battery weed-eater

350

Pallet of Hydraulic Parts

351

Pallet of Misc.
Plow handles, large bird box, box of tape, assorted fasteners

352

2 Wall Heaters
(1) gas, (1) electric

352A

Pallet of Parts*
Hose fittings, hydraulic fittings, hose clamps, (4) 10' sections of 6" flex hose, (1) section 5", (2) sections 4"

352B

Pallet of Hydraulic Parts*
Pumps, valves, pulleys, jig parts, (3) 7" conveyor belts

380

Hunting Blind
44" x 44" x 6' tall, windows on all sides

381

Round Bale Feeder
101" x 104" x 53" tall

382

Hay Feeder
52" x 10' x 80" tall

383

Enclosed Feeder
4' x 54" x 6' tall, on skids, has roof

384

Enclosed Feeder
4' x 54" x 6' tall, on skids, has roof

385

Pioneer Horse Cart
P225/75R16 tires, 34 x 40" platform with seat, needs new shaft

386

IH 200 Manure Spreader
1/2" x 8'6" x 16" deep, works

386A

Fuel Tank and T-Posts
28 x 44 x 60" long fuel tank-has a few holes, approx. 25 assorted t-posts

387

Livestock Waterer
Mounted on 6" x 5' concrete slab

388

Livestock Waterer
Mounted on 6" x 5' concrete slab, Ritchie Thrifty-King CT2-2000

389

Livestock Waterer
Mounted on 6" x 5' concrete slab, Ritchie Thrifty-King CT2-2000

390

Round Hay Feeder*
8' x 45" tall

391

Round Hay Feeder*
8' x 45" tall

392

Skate Rolls*
19" x 10'8", 2 x 15 1/2" rolls, varied spacing

399

3 Schwinn Bikes and Bike Cart
(3) 7 speed bikes, (1) child carrier cart

400

Rough Cut Cherry Table Top Slab
25-30" wide x 85" long, 2" thick

401

Rough Cut Cherry Table Top Slab
28" x 7' x 2"

402

Rough Cut Cherry Table Top Slab
30" x 7' x 2"

403

Rough Cut Cherry Table Top Slab
30" x 7' x 2"

404

Rough Cut Cherry Table Top Slab
30" x 7' x 2"

405

Rough Cut Walnut Slabs
4 pieces, 18-20" wide, 80-84" long, 2" thick

406

Rough Cut Walnut Lumber
9-12" wide, 8'6"-12'6" long, 1" thick, 6 pieces

407

Rough Cut Walnut Lumber
5 1/2-10" wide, 7'-12' long, 1-1 1/4" thick, approx. 390 board foot

407A

Rough Cut Cedar Lumber*
Approx. 616 BF, 4 1/2-28" wide, 9' long, 1" thick

407B

Rough Cut Cedar Tabletop Slab*
26 x 102 x 2 1/2" thick

407C

Rough Cut Cedar Tabletop Slab*
20 X 102 x 2 1/4" thick

407D

Rough Cut Cedar Tabletop Slab*
23 x 102 x 2" thick

407E

Rough Cut Cedar Tabletop Slab*
26 x 102 x 2 1/4" thick

407F

Rough Cut Cedar Tabletop Slab*
27 x 102 x 2 1/8" thick

407G

Rough Cut Cedar Tabletop Slab*
24 x 102 x 2" thick

407H

Rough Cut Cedar Tabletop Slab*
20 X 102 X 2 1/4" thick

408

Cedar Firewood Blocks
3 1/2 x 3 1/2 x 20" long, approx. 1000-1100 pieces

409

Cedar Firewood Blocks
3 1/2 x 3 1/2 x 20" long, approx. 1000-1100 pieces

410

Cedar Firewood Blocks
3 1/2 x 3 1/2 x 20" long, approx. 1000-1100 pieces

411

Stacking Sticks
3/4 x 1 1/4 x 39", approx. 1500 pieces

412

Cedar Firewood Blocks
3 1/2 x 3 1/2 x 27" long, approx. 350 pieces

413

Cedar Cribbage Blocks
3 1/2 x 3 1/2 x 40" long, approx. 250 pieces

414

Cedar Cribbage Blocks*
3 1/2 x 3 1/2 x 42", approx. 260 pieces

Schrock WoodworkingPrevious Page Listing ID#: 1525794

Free Email Notifications

Share This Listing

Other Sales byThis Company

Sponsored Links

Schrock Woodworking

Login

Sign Up

Sign Up

Login

Schrock Woodworking
Previous Page Listing ID#: 1525794

Other Sales by
This Company