THIS IS A COMPLETED SALE
View current listings by this company

Green Ridge Wood Products
Previous Page Listing ID#: 1509145

Auction Location
Baltic, OH 43804

Auction Dates and TimesSALE IS COMPLETED
Thursday Jun 1, 2023 Completed

Auction Type
Live Auction

Company Information
Bright Star Realty and Auctions, INC Contact: Loren Beachy Phone: 574-825-0704 Email: beachyauctions@gmail.com Website: brightstarauctions.com GoToAuction.com ID#: 5286 View company information and listings

Free Email Notifications

Sign up for the GoToAuction.com email notifications and we will let you know about sales in your area! You may set up alerts by area (zip and radius), keywords, and by company. It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions
Bidder Terms and Conditions There is a 13% online buyer’s premium in effect for all purchases made online. Buyer’s premium is 10% for onsite bidders. All items sell where is as is with no warranties or guarantees. Buyer is responsible to inspect all merchandise prior to placing bids. Payment terms: Cash, check, wire transfer. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice. Onsite buyers, payment is due the day of the auction. If onsite bidders wish to send a wire and still be assessed only the onsite buyer’s premium, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. All items are pick-up only. Smalls must be removed within 2 days. All items must be removed within 30 days unless otherwise noted. Loadout available day of auction, after that by appointment. Please call agent for more info. Buyer shall assume responsibility of all property when auctioneer says sold. Auction company is not responsible for any missing or stolen items. These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer. Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms. Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded where required. Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer: “Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction. “Absentee Bidder” means a person or entity that submits an Absentee Bid. “Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION. “Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids. “Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected. “Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder. “Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms. “Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer. "Buyer" means the Winning Bidder with respect to each Lot of Personal Property. "Buyer's Premium" is an amount with respect to each Lot of Personal Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account. “Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation. “Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer. “High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot. “High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on the Lot put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price. “High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot. "Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event. “Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer. “No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale. “Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions. “Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online. "Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered. “Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers. “Personal Property” means all tangible and moveable property, including fixtures, designated as Property. “Pick-up” means the act of picking up or removing sold Lots by respective Winning Bidders at the date(s), time(s), and location indicated for such during the Auction or as later agreed to by Seller and Buyer. “Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer). “Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms-length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction. “Property” means the Real Property and the Personal Property. “Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium. "Registered Bidder" means a person or entity that has registered to bid at the Auction. “Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction. “Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE. “Reserve Price” means the minimum price that Seller is willing to accept for specific Property. “Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer. “Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid. “Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by Seller). "Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid. “Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction. Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration. Governing Law. For Auctions in the State of Indiana and Online. Unless otherwise indicated, all Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are deemed to be entered into in the State of Indiana, all bids and payments are deemed to be received in the State of Indiana, and the contract, if any, will be deemed to be formed and entered into in the State of Indiana. Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium. Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion. Nature of the Auction. This Property is being sold at the Auction in the manner indicated on the first page of this Agreement. Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms. No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer. Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online: Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties, (i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer. No Reduction or Retraction of Online Bids. Online bids may not be reduced or retracted. Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification. Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). All prebids and maxbids placed online are considered absentee bids. Auctioneer pledges complete integrity in the treatment of absentee bids and absentee bids may be initiated and advanced in accordance with Auctioneer’s policies and procedures. Auctioneer has the right to initiate any absentee bids at 25% to 50% of their maximum amount. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder. Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion. Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder. Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction. Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot of Personal Property will be the Buyer of such Property. All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING. Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings. Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property. Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or representation by Auctioneer. Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller. Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction. Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ringman, or multiple bid assistants or ringmen, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid. Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer. All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS. Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked-Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made. Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases are due upon receipt of your invoice. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. If onsite bidders wish to send a wire, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion. Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Tools, packing material, and/or assistance will not be supplied at Pickup, so Buyer must plan accordingly. Disassembly and removal shall be done in a quiet and workmanlike manner, and each Buyer, in making its bid, shall thereby indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer’s employees, agents, representatives, or independent contractors in connection with the Pickup. Any and all damages to the Pickup site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller. Each Buyer must show a copy of the invoice (digital or hard copy) and government-issued photo identification before Lots will be released. No Buyer shall bring pets or young children to the Pickup, as the movement of Lots presents an extremely high-risk environment that could result in injury or death. Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them. In addition, Buyer’s bidding privileges may be suspended at future auctions. Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid. No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number. Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer. Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession. Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled to specific performance or other equitable relief. Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages. Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property. Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium. Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller. Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site. Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim or suit relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial. Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their rights.

Listing Terms and Conditions

Bidder Terms and Conditions
There is a 13% online buyer’s premium in effect for all purchases made online. Buyer’s premium is 10% for onsite bidders. All items sell where is as is with no warranties or guarantees. Buyer is responsible to inspect all merchandise prior to placing bids. Payment terms: Cash, check, wire transfer. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice. Onsite buyers, payment is due the day of the auction. If onsite bidders wish to send a wire and still be assessed only the onsite buyer’s premium, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. All items are pick-up only. Smalls must be removed within 2 days. All items must be removed within 30 days unless otherwise noted. Loadout available day of auction, after that by appointment. Please call agent for more info. Buyer shall assume responsibility of all property when auctioneer says sold. Auction company is not responsible for any missing or stolen items.
These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer.

Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded where required.
Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer:

“Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction.
“Absentee Bidder” means a person or entity that submits an Absentee Bid.
“Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION.
“Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids.
“Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected.
“Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder.
“Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms.
“Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer.
"Buyer" means the Winning Bidder with respect to each Lot of Personal Property.
"Buyer's Premium" is an amount with respect to each Lot of Personal Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account.
“Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation.
“Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer.
“High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot.
“High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on the Lot put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price.
“High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot.
"Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event.
“Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer.
“No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale.
“Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions.
“Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online.
"Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered.
“Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers.
“Personal Property” means all tangible and moveable property, including fixtures, designated as Property.
“Pick-up” means the act of picking up or removing sold Lots by respective Winning Bidders at the date(s), time(s), and location indicated for such during the Auction or as later agreed to by Seller and Buyer.
“Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer).
“Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms-length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction.
“Property” means the Real Property and the Personal Property.
“Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium.
"Registered Bidder" means a person or entity that has registered to bid at the Auction.
“Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction.
“Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE.
“Reserve Price” means the minimum price that Seller is willing to accept for specific Property.
“Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer.
“Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid.
“Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by Seller).
"Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid.
“Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction.

Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.
Governing Law.
1. For Auctions in the State of Indiana and Online. Unless otherwise indicated, all Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are deemed to be entered into in the State of Indiana, all bids and payments are deemed to be received in the State of Indiana, and the contract, if any, will be deemed to be formed and entered into in the State of Indiana.
Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.
Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
Nature of the Auction. This Property is being sold at the Auction in the manner indicated on the first page of this Agreement.
Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
2. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
3. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
4. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
5. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
6. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
7. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
8. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.
9. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties, (i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
10. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
11. No Reduction or Retraction of Online Bids. Online bids may not be reduced or retracted.
12. Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.
13. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.
Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). All prebids and maxbids placed online are considered absentee bids. Auctioneer pledges complete integrity in the treatment of absentee bids and absentee bids may be initiated and advanced in accordance with Auctioneer’s policies and procedures. Auctioneer has the right to initiate any absentee bids at 25% to 50% of their maximum amount. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot of Personal Property will be the Buyer of such Property.
All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.
Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or representation by Auctioneer.
Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ringman, or multiple bid assistants or ringmen, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked-Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases are due upon receipt of your invoice. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. If onsite bidders wish to send a wire, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.
Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Tools, packing material, and/or assistance will not be supplied at Pickup, so Buyer must plan accordingly. Disassembly and removal shall be done in a quiet and workmanlike manner, and each Buyer, in making its bid, shall thereby indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer’s employees, agents, representatives, or independent contractors in connection with the Pickup. Any and all damages to the Pickup site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller. Each Buyer must show a copy of the invoice (digital or hard copy) and government-issued photo identification before Lots will be released. No Buyer shall bring pets or young children to the Pickup, as the movement of Lots presents an extremely high-risk environment that could result in injury or death.
Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them. In addition, Buyer’s bidding privileges may be suspended at future auctions.
Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.
No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.
Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled to specific performance or other equitable relief.
Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim or suit relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their rights.

Listing Information
Type of Auction: Sawmill and Precut Line liquidation Highlight Pieces: New Holland and Komatsu wheel loaders, Toyota forklifts, 3 Head Baker resaw, like new Millcreek sizer and chop saw, Baker de-duster, John Deere power unit and complete hydraulic system. 00 Information Lot Type of Auction: Sawmill and Precut Line liquidation Highlight Pieces: Komatsu wheel loader, Toyota forklift, 3 Head Baker resaw, like new Millcreek sizer and chop saw, Baker de-duster, John Deere power unit and complete hydraulic system. Buyers have option to buy complete precut line and lease the building for up to two years. Auction/Seller Story: Green Ridge Wood Products in Baltic OH, is liquidating their complete sawmill and pre-cut line. Equipment such as Komatsu wheel loaders, Toyota forklifts, a 3 Head Baker resaw, like-new Millcreek sizer and chop saw, Baker de-duster, John Deere power unit, and hydraulic system will be sold at no reserve auction. Most equipment was purchased new in 2018 but is being sold due to the owner's battle with COVID-19 and their decision to pursue other income streams. Consignments are welcome with seller-provided unloading by appointment. Don't miss this chance to buy high-quality equipment from a reputable seller. Buyers have the option to buy the complete, late model, pre-cut line and lease the property for up to two years. 01 Preview Lot Week of auction from 8-4 or by appointment. 02 Loadout Information Daniel (330-897-0909) will provide loading for smalls for the first 2 days after the auction. Everything must be removed in 30 days Riggers: Nick Neuenshwander Metal Monkey 330.231.1490. By appointment only. 03 Payment Information Payment terms: Cash, check, wire transfer. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice. Onsite buyers, payment is due the day of the auction. If onsite bidders wish to send a wire and still be assessed only the onsite buyer’s premium, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. 10 3156G Live Heel Log Loader 1/50 Die-Cast Metal Replica Have fun buying a high-quality, die-cast toy! All proceeds including buyer's premium will go to Feed My Starving Children (FMSC) which is a Christian nonprofit dedicated to seeing every child and person around the world healthy, nourished and whole in body and spirit. Bright Star will pay for standard shipping and handling to the 48 contiguous states for buyers of this lot. https://www.youtube.com/watch?v=jYATxeDmuzM&t=8s 11 Manual Sealless Steel Strapping Tool Model A333, works for 1/2" 5/8" or 3/4" banding, new in box. Shipping available for $30 12 Heavy Equipment Key Set 36 Keys Shipping available for $20 46 Jockey Grinder MN: 97H, Milwaukee drill powered 47 Electric Saw Sharpener Saw arbor guided 48 Signode Poly Banding Cart MN: DF-10D, 1/2" poly strapping on cart, 1 roll 5/8" poly strapping 49 Signode Poly Banding Cart MN: DD-1A, has 7/16" poly strapping 50 Banding Tools and Cart Steel banding tightener and crimper, Signode model DF15 cart 51 Signode Banding Tool Tightener and cutter, for 1/2" poly banding 60 Meadows # 2 Hydraulic Carriage 3 HB (1st of an entirety) SN: 20-0027-02, 15' x 38" center to center wheel base, 110 V over hydraulic controls, hydraulic dogs, tapers, setworks, digital electronic setworks, panagraph, 2 headblock have live dogs and tapers, one is manual, New in 2002 not used hard, one owner used mostly for a hobby. 61 Wood Frame Husk 56" (Part of an entirety) 4' x 7' frame, live outfeed rolls with hydraulic motor, 56" saw, no control valves, 20" dust blower pipe to bin 62 Track and Frame with Carriage Drive (Part of an entirety) 45' track, cable drum with hydraulic motor and control valve 63 Roll Case (Part of an entirety) 24" x 6' live roll case, 6 1/2" x 19 1/2" rolls, no drive 64 Meadows Mill Entirety of Lots 60-63 With 10% raise. 65 Meadows 40" Log Turner Hydraulic drive, control valve 66 3 Strand Log Deck with Stop'n'Load 8' x 22' plus 42" nose skids, Tulsa winch drive with hydraulic motor, hydraulic stop'n'load 66A 56" Sawblade B style 66B Cable 3/8" for Carriage Drive New cable, length unknown 67 Mud Saw 3/4" x 8" cutter, 6' arm, hydraulic drive, control valve 68 Hydraulic Tank and Pumps (1st of an entirety) 3 hydraulic pumps, 54" x 48" x 36" tank, all hydraulic lines going to equipment and pumps 69 1989 Cummins Diesel Engine (Part of an entirety) MN: C Series, 150 hp, 3352 hours, 8.3L, Model SP114P1 clutch with pulley, WinCo generator 2400 watts, 120 V, in very good condition 70 Line Shaft and Belts (Part of an entirety) 2 7/16" x 16' shaft, pulleys and belts, belt tightener, steel supports 71 Diesel and Line Shaft Entirety of Lots 68-70 With 10% raise. 72 Meadows 3 Saw Edger SN: 867X-66, 2 moving saws, 1 stationary saw, 4" x 36" capacity, hydraulic drive. 73 Dust Blower 16" 6" inlet, 4" outlet, no drive, includes pipe to bin 74 Irvington Swing Arm Chop Saw Hydraulic motor, 14" blade 75 Skate Rolls 2 sections 20" x 10', 2 pc. 28" x 10' 76 Slab Racks 38" x 40", 4 pc. 77 Fuel Tank on Stand 30" x 48" 78 Air Tank 30" x 10' 100 Baker 3 Head Band Saw (1st of an entirety) Model: BRR-O, SN: 98-2531, hydraulic motor on heads, hydraulic feed, 7/8" x 28' wheels, 1 1/4" bands, 6" feed belt, Air Bag blade tension, includes hydraulic control valves. 101 Cant Sizer Build By Millcreek Machine (Part of an entirety) 5" cutter head carbide tips, hydraulic drive, 5" wide feed belt, hydraulic drive side press rolls, 6" dust outlet, includes hydraulic control valves, cant capacity 5 1/2" x 11". 102 Millcreek Machine Up Cut Chop Saw (1st of an entirety) 22" blade hydraulic drive, air lift cylinder, dual press safety switch, 22" x 8' live out feed roll, air cylinder material stops. 103 Live In Feed Rolls Millcreek Machine (Part of an entirety) 22" x 12', 4 1/2" x 18" rolls, air side press arms, hydraulic control valve. 104 3 Strand In Feed Deck (Part of an entirety) 8' x 8' hydraulic drive 105 4 Strand Unscrambler (Part of an entirety) 9' x 4' hydraulic drive, with air control valve 106 Live Out Feed Rolls (Part of an entirety) 22" x 7', 4 1/2" x 18" rolls, hydraulic drive, air side kickers, automatic switch for kicker. 107 Skate Rolls (Part of an entirety) 4 strand, 4 1/2' long, 6" x 6 1/2' landing table. 108 Cut Up Line Entirety of Lots 102 - 107 With 10% raise. 109 Turn Around Belt by Millcreek Machine (Part of an entirety) 33" 68" belt, 6" x 66" popup transfer belt, sidekick cant transfer, hydraulic driven, air lift cylinder, air hydraulic control valve, 8" x 20" fill in table. 110 Live Transfer Belt (Part of an entirety) 6" x 17' hydraulic drive, no controls. 111 Turn Around Table (Part of an entirety) 33" x 88", 44" pop up live rolls. 112 Baker M4I Deduster (Part of an entirety) Model: BDD-O, SN: 19-553, electric drive, 3 head Nylon brushes, with cut out box. 113 Live Out Feed Belt (Part of an entirety) 44" x 20' electric drive 114 Groove Cutting Machine (Part of an entirety) 1" wide cutting head, hydraulic drive, hydraulic feed rolls air press down, air hydraulic control valve. 115 Chop Saw (Part of an entirety) 12" blade, 15" x 5' dead rolls, material stops, hydraulic drive, with air hydraulic control valve, manual cut. 116 42" Reckart Dust Blower (Part of an entirety) 18" inlet, 18" outlet, hydraulic drive. 117 Dust Cyclone (Part of an entirety) 6' x 12' with 18" pipe from blower. 1 pc. 18’’ x 18’ , 1pc. 18’’ x 8’ , 90 degree elbow 118 Dust Pipe (Part of an entirety) All pipe from equipment to blower. 2 pc. 22 degree elbows , 1 pc 18’’ x 11’6’’ pipe , 58’ pipe stepped down with 6’’ x 6’ drops to equipment 119 John Deere Power Unit (1st of an entirety) SN: PE6068H732172, 6.8L 225 hp, 3000 hours since complete rebuild, with NACD clutch. 120 Lima Mac Generator (Part of an entirety) Model: 440MDL0861, SN LC-0000148-1514, 60 KW, 208/240 V, 440 frame, with cut out box, no wires included. 121 GE Transformer (Part of an entirety) 75.0 KVA, 60HZ, 3 ph., electrical conduit with 50' wire included 122 Air Compressor (Part of an entirety) SN: 010117-111, belt drive with adjustable mount. 123 Electrical Conduit with Wire 50' wire and conduit 123 Line Shaft and Hydraulics (Part of an entirety) 700 gallon hydraulic tank, hydraulic pumps, hydraulic valves, line shaft, hydraulic lines going to equipment. 123A John Deere Power Unit and Hydraulic System Entirety of Lot 119 - 123 With 10% raise. 124 Master Tieback from Lots 100-123 With 10% raise. Buyer has the opportunity to buy complete precut line and lease the property for up to two years 124A Wood-Mizer HR120 Resaw MN: HR120G25, SN: 09091010, 25 hp, 2310 hours, Kohler Command Pro 25 gas engine, electric start, 12" x 6' feed belt, 1 1/4" bands, 7/8" x 19" wheels with v belts 124B 3 Electric Motors for Baker Resaw MN: 1799A, 20 hp, 1765 rpm, 256 T frame, 3 ph, off of Baker resaw, 1 adjustable mount, cord, in good condition 125 Air Tank 9' x 3' 126 Fuel Tank 38" x 60" on skids 127 Fuel Tank 38" x 60" on skids 128 1 1/4" Bandsaw Blades 12 new blades 129 1 1/4" Bandsaw Blades 45 used blades 130 Self Dumping Hopper 1 cu. Yard hopper 131 Self Dumping Hopper 4' x 3' x 2' 132 Trash Hopper 6' x 5' x 4' hopper, with 7" x 3" fork pockets, heavy duty 3/8" metal 133 Scrap Rack 47" x 35" x 38" 134 Material Rack 15' long 40" at one end and 20" at other 135 Metal Shelf 10' long, 4' deep 6' tall 136 Swing Arm Cut Off Saw Hydraulic drive 14" blade, 17' x 21" live in feed rolls hydraulic drive, 22" x 6' dead out feed rolls with material stops 137 Material Unscrambler 4 strand, 42" tall, 11' wide, hydraulic drive with air hydraulic control valve. 138 3 Strand In Feed Deck 9' x 9' hydraulic drive 139 Rip Saw Set up for line shaft, 14" blade hydraulic drive feed rolls. 139A Carbide Tip Blades 14" 1 1/2" arbor, 10 pc. Fresh sharpened 140 Accura Planer Model: WJ28, SN 31211637, set up for line shaft. 141 Single Head Notcher Manual loading with power feed, 9" wide head, set up for line shaft. 142 J.A. Fay Planer Set up for line shaft. 143 Dado Cutter Hydraulic drive, 1 1/2" wide blade. 144 Heavy Duty Drill Press Model: 170F, hydraulic drive. 145 10" table saw Model: TSC-10, SN: 47058, hydraulic drive. 146 Perkins Power Unit 2900 hours since complete rebuild, 4 cylinder diesel, with clutch. 147 Air Compressor Belt drive, with adjustable mount 148 Line Shaft, Hydraulic Tank, and Hydraulic Pumps 3 hydraulic pumps 149 Air Tank 40" x 8' 150 Fuel Tank 67" x 3' with stand 151 36" Dust Blower Hydraulic drive, with all pipes to and from blower 152 Storage Cabinet 32" wide x 6' tall x 24" deep 153 Material Rack 3' x 3' square 6' tall, 5 shelves 154 Material Racks 3' wide x 2' deep x 6' tall, 8' wide x 3' deep x 7' tall 155 Material Rack 4' wide x 3' deep x 6' tall 156 Material Rack 5' wide x 3' deep x 6' tall 157 Lumber Cart 3' wide x 6' long, two wheels swivel. 158 Board Stacking Rack 4' x 4' x 8' steel rack. 163 Toyota Forklift Model: 7FGU18, SN: 61456, 7,742 hours, 2 stage mast, side shift, 4" x 42" forks, propane or regular gas, no tank included, solid rubber tires, 3300 lb capacity, 7' mast. One owner unit that was well maintained and is ready to go. 164 2005 Komatsu WA150-5 Wheel Loader SN: KMTWA051C01071803 Meter reads: 6,328 hours Engine: Komatsu 3.9L Fuel type: Diesel ROPS: Enclosed 3rd Valve: No Tire Size: 17.5 R25 Attachments: Log forks Heater: Yes A/C: Yes Quick Attach: No Features and Notes: Joystick boom control, well maintained, one owner machine that is production ready. 164A Tire Chains for Loader 165 1949 John Deere A Tractor SN: 616435 Engine: 2 cylinder Fuel type: Gas Transmission: 4 speed standard Drive: 2 wheel Rear PTO: Yes 3 Point hitch: No Features and Notes: Belt pulley, aux hydraulic, runs strong. 164B Case W20C Wheel Loader* 2 lever boom control, no third valve, has heat/AC, pin on forks,sells with forks, runs and operates. 164C Bucket for W20C* Pin on dirt bucket. 165A Massey Ferguson 50 Tractor* SN: SGM5000I7 Meter reads: 1,367 hours Engine: 4 cylinder Transmission type: 3 speed with high and low Fuel type: Gas Rear PTO: Yes 3 Point hitch: Yes Features and Notes: 1,367 hours after rebuilt, new battery, rubber on steel wheels. Contact Allen with any questions 330-600-0754 166 2001 John Deere 250 Skid Steer SN: KV0250A251321 Meter reads: 18.5 hours Engine: John Deere 2.9L Fuel type: Diesel ROPS: Open 2 Speed: No Highflow: No Attachments: None A/C: No Heater: No Features and Notes: Over $9000 spent on overhaul for parts alone, new brake system, 18.5 hours on overhaul, low hours on new hydraulics, runs strong. 166A Quick Attach Forks 4" x 42" forks, skid steer quick attach 167 Hawk Line 3 Point Drag Grader 8', 3 pt. mount 168 Bessemer Hit and Miss Engine Pulley with clutch 169 Ford Power Unit MN: 786091-G15-TB, SN: AHE-0290-2BB, 3.7L, diesel, clutch with pulley 169A Case Power Unit 4 Cylinder Diesel SN: M56 CBLCCFCDECFAMKFAAKR, motor reads 3017 hours, clutch, control panel, approx 75 HP. one owner unit that was well maintained and is production ready 170 4 Strand Transfer Deck 11' x 13', no drive 170A 2 Strand Transfer Deck 46" x 18', no chain, no sprockets, no drive 171 Dust Blower 36" Portable 13" inlet, 12" outlet, mounted on trailer, no power 172 Electric Motor and Gear Boxes 2 hp. Electric, 2 gear boxes 173 Deck Chain All chain on pallet 174 Deck Chain 81X All chain and sprocket on pallet 175 Sprockets and Pulley Skid of parts, pulleys, sprockets, chain, connecting links 175A Pulleys Skid of used pulleys 176 Antique Chain Saws Includes Stihl, Sears, Pioneer, Craftsman, McCulloch, Wright, Powerline, David Bradley, Condition unknown. 177 Hoffco Scythette Brush Cutter SN: 9441, hand held brush cutter, 10" cutting bar, condition unknown. 178 Stacking Racks 1 pc. 4' x 4' x 4', 1 pc. 42" x 42" x 48", 1 pc. 36" x 48" x 38" 179 Stacking Shelves 36" x 36" x 8' 180 Pallet Racks 2 pc. 42" x 8' end frames, 6 pc. 8' cross members, 16 pc. 9' cross members, boards for shelfing 181 Slip on Dust Bucket 92" x 5" x 48", tie down chain 182 Wooden Scrap Box 6' x 42" x 42" 183 Deer Transport Box 4' x 44" x 36", 2 compartments, carry handles 184 Truck Box and Air Tanks 4' x 2' x 2' tool box, 2 pc. Vertical air tanks 185 Baker Control Boxes Electrical breaker and fuse box with variable speed drive 186 Steel Lug Wheels 42" 6 hole steel wheels, 17-5L-24 Bolton tire, 13-6-28 bolt on tire 186A Solid Rubber Wheels* 7" x 16" inside, 1 rim w/ tire 6.50 - 16. 3 pieces 187 Skid Steer Wheels with Solid Rubber Tires 30-10-16, 8 lugs 187A Spartan Equipment Generator E9500 SN: GTB 6670, new unit, 20 and 30 amp outlets, portable 188 Lincoln Portable Welder MN: AC 150, SN: A-952153, Kohler 10 hp gas engine. 189 Emglo Twin Tank Portable Air Compressor 10 hp Honda gas engine, engine not starting 190 Air Compressor on Tank MN: 320, SN: 209605, Honda GX160 gas engine, vertical tank 191 Hawke Shop Press 60,000 lbs., no Jack 192 Slider Window 36" x 32" slider window 193 Work Bench Wood Top 7' x 30" workbench with vise, tool drawer. Contact Allen with any questions 330-600-0754 193A Work Bench with drawers 6' x 24" x 35" 193B Work Bench with drawers 6' x 24" x 35" 194 Hydraulic Tank, Rollers, and Deck Chain 24" x 16" x 12" hydraulic tank, 2 1/2" x 17 1/2" conveyor rolls, deck chain 195 Hydraulic Tank 18" x 18" x 16", valve and filter 196 V-Belts New and used belts 197 New! Fuel Transfer Pump 12 V New in box, includes wire and hose 197A Gas Boy Fuel Pump Manual pump with hose 198 Truck Hitch Adjustable Fits 2" Reese hitch 199 Hydraulic Hose with Elbow Ends 3/4" hose, male pipe one end JIC elbow one end, assorted length, 11 pc. 199A 3" Coil Pallet Nails 11 boxes 199B Sure Fit 3 1/2" Wire Coil Pallet Nails 12 1/2 boxes 199C 1" Coil Roofing Nails 1 box 199D Pulley on Hook 200 Do-All Metal Cutting Bandsaw Model: DBW, SN: 2462917C, 220V 1ph, variable speed, edging stone, oiler, light, 16" throat capacity, electric drive. Contact Allen with any questions 330-600-0754 201 Kalamazoo Metal Bandsaw Model: P-46, SN: 10123, 9" x 16" capacity, electric drive, 1 new blade #16. Contact Allen with any questions 330-600-0754 202 Kondia Powermill Milling Machine Model: FV-1, SN: 102-1, electric drive, extra tools, power feed table. Contact Allen with any questions 330-600-0754 203 Brown Sharper Horizontal Milling Machine Electric drive, lots of extra tooling. Contact Allen with any questions 330-600-0754 204 SIP Jig Boring Machine Model: MP-3K, SN: 304, extra tooling, electric drive. Contact Allen with any questions 330-600-0754 205 Covel Surface Grinder Model: 35, SN: 35-140, 8" x 24" capacity, electric drive. Contact Allen with any questions 330-600-0754 206 Hamond Surface Grinder Model: 2, SN: 1116-51, 6" x 18" capacity, electric drive, Brown + Sharp Magnetic chuck, extra tooling. Contact Allen with any questions 330-600-0754 207 LeBlond Regal Metal Lathe 13" x 30" capacity, with tooling, electric drive. Contact Allen with any questions 330-600-0754 207A Layout Plates 15" x 20", 3 pc. Contact Allen with any questions 330-600-0754 207B Machinist Vice 8 1/2" 208 Klopp Metal Mill Electric drive. Contact Allen with any questions 330-600-0754 209 Floor Model Drill Press Heavy duty, electric drive, 6" throat, 4" stroke. Contact Allen with any questions 330-600-0754 210 Index Machine Vertical Mill Electric drive, powered table. Contact Allen with any questions 330-600-0754 211 Royal Double Drill Press SN: 16-21204, 8" throat, 5" stroke, electric drive. Contact Allen with any questions 330-600-0754 212 South Bend Lathe 10" x 30 capacity, extra tooling. Contact Allen with any questions 330-600-0754 213 Majestic Grinder Mill ID-OD grinder. Contact Allen with any questions 330-600-0754 214 Floor Model Drill Press 4" stroke, 7" throat, electric drive, variable speed. Contact Allen with any questions 330-600-0754 215 Sonnet Honing Machine Electric drive, extra stones. Contact Allen with any questions 330-600-0754 216 Scripta Pantograph Copy Mill Operators manual. Contact Allen with any questions 330-600-0754 217 K.O. Lee Tool Cutter Model: A600, SN: 1498, electric drive. Contact Allen with any questions 330-600-0754 218 Niagara Metal Shear Model: 42-F, SN: 48966, Mild steel capacity 42" -16 ga, guide. Contact Allen with any questions 330-600-0754 219 Stacking Racks 30" x 41" x 8", 10 pc. 220 Fairbanks Platform Scales With parts. Contact Allen with any questions 330-600-0754 221 CAT FC40 Tow Motor Battery Powered SN: 544374, 15526 hours, 4" x 42" forks, 83" high mast, 2 stage, side shift, brakes need fixed, battery is weak, runs and operates. Contact Allen with any questions 330-600-0754 222 Hydraulic Pak 32" x 68" x 25" tanks, steel platform, 2 Baldor 30 hp. Electric motors with pumps, oil cooler radiator, wires to motors. Contact Allen with any questions 330-600-0754 223 Hydraulic Pak 4' x 5' x 2' tank on stand, 2 hydraulic pumps on mounts, air control valve, no power. Contact Allen with any questions 330-600-0754 224 Lumber Cart 28" x 90", tongue steer, solid rubber wheels. Contact Allen with any questions 330-600-0754 225 Bandsaw Blades and Parts New 8 pc. 1 1/4" bandsaw blades for Wood-Mizer multi-head resaw, parts for Wood-Mizer resaw. Contact Allen with any questions 330-600-0754 226 Chains 5/16" with hooks 2 pc. 10", 1 pc. 7" Contact Allen with any questions 330-600-0754 227 Stihl MS 290 Chainsaw 20" bar, case. Contact Allen with any questions 330-600-0754 228 Ridge Metal Chopsaw 14" Electric motor. Contact Allen with any questions 330-600-0754 229 Cleereman 36" Carriage SN: 36-307, MN: 36, 3 head block, air dogs, tapers, setworks, 16' long, 50" wide center to center wheels, no control, 6" x 6" frame, 5/8" dogs. Contact Daniel Miller with any questions 440-321-5965 230 Timber Wolf Rosser Head Debarker (1st of an entirety) hydraulic pump, runs and operates, extra pump and head motor, head hydraulic powered, bull wheels hydraulic powered, barn sweep bark conveyor, pantograph, 3" x 24" bull wheels, 12' outside to outside bull wheels, 30" x 16' capacity, 36" x 20' flat 16' slant barn sweep. Sold offsite. Location: 51584 TR 214B, Fresno, OH 43824 231 Perkins Power Unit (Part of an entirety) MN: 5791/2400, SN: U137125G, 75 hp, 4760 hours, Murphy controls with shut down, no pump, in good condition. Sold offsite. Location: 51584 TR 214B, Fresno, OH 43824 232 Debarker Entirety of Lot 230-231 With 10% raise. Sold offsite. Location: 51584 TR 214B, Fresno, OH 43824 233 90-Degree Green Chain Has poly chain, hydraulic drive, Made by Mill Innovation Designs 234 Frevert Lathe* Hydraulic drive. Contact Allen with any questions 330-600-0754 235 Delta Rockwell Drill Press* 3 head drill press, air powered with foot pedal control. Contact Allen with any questions 330-600-0754 236 Craftsman Rip Table* 8" blade, belt drive, no drive motor. Contact Allen with any questions 330-600-0754 237 Hankison After Cooler* SN: T49097, Model: ACH 300, Air cooled, 2 electric drive fans, 300 CFM. Contact Allen with any questions 330-600-0754 238 22" Squirrel Cage Blower* SN: 21287, setup for belt drive. Contact Allen with any questions 330-600-0754 239 Trailer Axle with Wheels and Tires* 3' long leaf springs. Contact Allen with any questions 330-600-0754 240 Steel Crate* 60" w x 30" deep, 44" high. Contact Allen with any questions 330-600-0754 241 Banding Tools 10 pc. tighteners and crimpers 242 Control cables, Oil Filters , and Belts Control cable for encoder to computer, all parts on skid. 243 Welding Helmets 2 pc. 244 Chain Binders, Hydraulic Motor, Gauges, Wheels All parts on skid 245 4' x 4' Operating Cab 246 Tool Lot* Hand tools, pipe fittings, air hose 247 Privacy Fence Boards 3/4" x 5" x 48" long, 60 pieces total.

Listing Information

Type of Auction: Sawmill and Precut Line liquidation
Highlight Pieces: New Holland and Komatsu wheel loaders, Toyota forklifts, 3 Head Baker resaw, like new Millcreek sizer and chop saw, Baker de-duster, John Deere power unit and complete hydraulic system.

Information Lot
Type of Auction: Sawmill and Precut Line liquidation

Highlight Pieces: Komatsu wheel loader, Toyota forklift, 3 Head Baker resaw, like new Millcreek sizer and chop saw, Baker de-duster, John Deere power unit and complete hydraulic system. Buyers have option to buy complete precut line and lease the building for up to two years.

Auction/Seller Story: Green Ridge Wood Products in Baltic OH, is liquidating their complete sawmill and pre-cut line. Equipment such as Komatsu wheel loaders, Toyota forklifts, a 3 Head Baker resaw, like-new Millcreek sizer and chop saw, Baker de-duster, John Deere power unit, and hydraulic system will be sold at no reserve auction. Most equipment was purchased new in 2018 but is being sold due to the owner's battle with COVID-19 and their decision to pursue other income streams. Consignments are welcome with seller-provided unloading by appointment. Don't miss this chance to buy high-quality equipment from a reputable seller. Buyers have the option to buy the complete, late model, pre-cut line and lease the property for up to two years.

Preview Lot
Week of auction from 8-4 or by appointment.

Loadout Information
Daniel (330-897-0909) will provide loading for smalls for the first 2 days after the auction. Everything must be removed in 30 days
Riggers: Nick Neuenshwander Metal Monkey 330.231.1490. By appointment only.

Payment Information
Payment terms: Cash, check, wire transfer. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice. Onsite buyers, payment is due the day of the auction. If onsite bidders wish to send a wire and still be assessed only the onsite buyer’s premium, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction.

3156G Live Heel Log Loader 1/50 Die-Cast Metal Replica
Have fun buying a high-quality, die-cast toy! All proceeds including buyer's premium will go to Feed My Starving Children (FMSC) which is a Christian nonprofit dedicated to seeing every child and person around the world healthy, nourished and whole in body and spirit. Bright Star will pay for standard shipping and handling to the 48 contiguous states for buyers of this lot.
https://www.youtube.com/watch?v=jYATxeDmuzM&t=8s

Manual Sealless Steel Strapping Tool
Model A333, works for 1/2" 5/8" or 3/4" banding, new in box. Shipping available for $30

Heavy Equipment Key Set 36 Keys
Shipping available for $20

Jockey Grinder
MN: 97H, Milwaukee drill powered

Electric Saw Sharpener
Saw arbor guided

Signode Poly Banding Cart
MN: DF-10D, 1/2" poly strapping on cart, 1 roll 5/8" poly strapping

Signode Poly Banding Cart
MN: DD-1A, has 7/16" poly strapping

Banding Tools and Cart
Steel banding tightener and crimper, Signode model DF15 cart

Signode Banding Tool
Tightener and cutter, for 1/2" poly banding

Meadows # 2 Hydraulic Carriage 3 HB
(1st of an entirety) SN: 20-0027-02, 15' x 38" center to center wheel base, 110 V over hydraulic controls, hydraulic dogs, tapers, setworks, digital electronic setworks, panagraph, 2 headblock have live dogs and tapers, one is manual, New in 2002 not used hard, one owner used mostly for a hobby.

Wood Frame Husk 56"
(Part of an entirety) 4' x 7' frame, live outfeed rolls with hydraulic motor, 56" saw, no control valves, 20" dust blower pipe to bin

Track and Frame with Carriage Drive
(Part of an entirety) 45' track, cable drum with hydraulic motor and control valve

Roll Case
(Part of an entirety) 24" x 6' live roll case, 6 1/2" x 19 1/2" rolls, no drive

Meadows Mill Entirety of Lots 60-63
With 10% raise.

Meadows 40" Log Turner
Hydraulic drive, control valve

3 Strand Log Deck with Stop'n'Load
8' x 22' plus 42" nose skids, Tulsa winch drive with hydraulic motor, hydraulic stop'n'load

66A

56" Sawblade
B style

66B

Cable 3/8" for Carriage Drive
New cable, length unknown

Mud Saw
3/4" x 8" cutter, 6' arm, hydraulic drive, control valve

Hydraulic Tank and Pumps
(1st of an entirety) 3 hydraulic pumps, 54" x 48" x 36" tank, all hydraulic lines going to equipment and pumps

1989 Cummins Diesel Engine
(Part of an entirety) MN: C Series, 150 hp, 3352 hours, 8.3L, Model SP114P1 clutch with pulley, WinCo generator 2400 watts, 120 V, in very good condition

Line Shaft and Belts
(Part of an entirety) 2 7/16" x 16' shaft, pulleys and belts, belt tightener, steel supports

Diesel and Line Shaft Entirety of Lots 68-70
With 10% raise.

Meadows 3 Saw Edger
SN: 867X-66, 2 moving saws, 1 stationary saw, 4" x 36" capacity, hydraulic drive.

Dust Blower 16"
6" inlet, 4" outlet, no drive, includes pipe to bin

Irvington Swing Arm Chop Saw
Hydraulic motor, 14" blade

Skate Rolls
2 sections 20" x 10', 2 pc. 28" x 10'

Slab Racks
38" x 40", 4 pc.

Fuel Tank on Stand
30" x 48"

Air Tank
30" x 10'

100

Baker 3 Head Band Saw
(1st of an entirety) Model: BRR-O, SN: 98-2531, hydraulic motor on heads, hydraulic feed, 7/8" x 28' wheels, 1 1/4" bands, 6" feed belt, Air Bag blade tension, includes hydraulic control valves.

101

Cant Sizer Build By Millcreek Machine
(Part of an entirety) 5" cutter head carbide tips, hydraulic drive, 5" wide feed belt, hydraulic drive side press rolls, 6" dust outlet, includes hydraulic control valves, cant capacity 5 1/2" x 11".

102

Millcreek Machine Up Cut Chop Saw
(1st of an entirety) 22" blade hydraulic drive, air lift cylinder, dual press safety switch, 22" x 8' live out feed roll, air cylinder material stops.

103

Live In Feed Rolls Millcreek Machine
(Part of an entirety) 22" x 12', 4 1/2" x 18" rolls, air side press arms, hydraulic control valve.

104

3 Strand In Feed Deck
(Part of an entirety) 8' x 8' hydraulic drive

105

4 Strand Unscrambler
(Part of an entirety) 9' x 4' hydraulic drive, with air control valve

106

Live Out Feed Rolls
(Part of an entirety) 22" x 7', 4 1/2" x 18" rolls, hydraulic drive, air side kickers, automatic switch for kicker.

107

Skate Rolls
(Part of an entirety) 4 strand, 4 1/2' long, 6" x 6 1/2' landing table.

108

Cut Up Line Entirety of Lots 102 - 107
With 10% raise.

109

Turn Around Belt by Millcreek Machine
(Part of an entirety) 33" 68" belt, 6" x 66" popup transfer belt, sidekick cant transfer, hydraulic driven, air lift cylinder, air hydraulic control valve, 8" x 20" fill in table.

110

Live Transfer Belt
(Part of an entirety) 6" x 17' hydraulic drive, no controls.

111

Turn Around Table
(Part of an entirety) 33" x 88", 44" pop up live rolls.

112

Baker M4I Deduster
(Part of an entirety) Model: BDD-O, SN: 19-553, electric drive, 3 head Nylon brushes, with cut out box.

113

Live Out Feed Belt
(Part of an entirety) 44" x 20' electric drive

114

Groove Cutting Machine
(Part of an entirety) 1" wide cutting head, hydraulic drive, hydraulic feed rolls air press down, air hydraulic control valve.

115

Chop Saw
(Part of an entirety) 12" blade, 15" x 5' dead rolls, material stops, hydraulic drive, with air hydraulic control valve, manual cut.

116

42" Reckart Dust Blower
(Part of an entirety) 18" inlet, 18" outlet, hydraulic drive.

117

Dust Cyclone
(Part of an entirety) 6' x 12' with 18" pipe from blower. 1 pc. 18’’ x 18’ , 1pc. 18’’ x 8’ , 90 degree elbow

118

Dust Pipe
(Part of an entirety) All pipe from equipment to blower. 2 pc. 22 degree elbows , 1 pc 18’’ x 11’6’’ pipe , 58’ pipe stepped down with 6’’ x 6’ drops to equipment

119

John Deere Power Unit
(1st of an entirety) SN: PE6068H732172, 6.8L 225 hp, 3000 hours since complete rebuild, with NACD clutch.

120

Lima Mac Generator
(Part of an entirety) Model: 440MDL0861, SN LC-0000148-1514, 60 KW, 208/240 V, 440 frame, with cut out box, no wires included.

121

GE Transformer
(Part of an entirety) 75.0 KVA, 60HZ, 3 ph., electrical conduit with 50' wire included

122

Air Compressor
(Part of an entirety) SN: 010117-111, belt drive with adjustable mount.

123

Electrical Conduit with Wire
50' wire and conduit

123

Line Shaft and Hydraulics
(Part of an entirety) 700 gallon hydraulic tank, hydraulic pumps, hydraulic valves, line shaft, hydraulic lines going to equipment.

123A

John Deere Power Unit and Hydraulic System Entirety of Lot 119 - 123
With 10% raise.

124

Master Tieback from Lots 100-123
With 10% raise. Buyer has the opportunity to buy complete precut line and lease the property for up to two years

124A

Wood-Mizer HR120 Resaw
MN: HR120G25, SN: 09091010, 25 hp, 2310 hours, Kohler Command Pro 25 gas engine, electric start, 12" x 6' feed belt, 1 1/4" bands, 7/8" x 19" wheels with v belts

124B

3 Electric Motors for Baker Resaw
MN: 1799A, 20 hp, 1765 rpm, 256 T frame, 3 ph, off of Baker resaw, 1 adjustable mount, cord, in good condition

125

Air Tank
9' x 3'

126

Fuel Tank
38" x 60" on skids

127

Fuel Tank
38" x 60" on skids

128

1 1/4" Bandsaw Blades
12 new blades

129

1 1/4" Bandsaw Blades
45 used blades

130

Self Dumping Hopper
1 cu. Yard hopper

131

Self Dumping Hopper
4' x 3' x 2'

132

Trash Hopper
6' x 5' x 4' hopper, with 7" x 3" fork pockets, heavy duty 3/8" metal

133

Scrap Rack
47" x 35" x 38"

134

Material Rack
15' long 40" at one end and 20" at other

135

Metal Shelf
10' long, 4' deep 6' tall

136

Swing Arm Cut Off Saw
Hydraulic drive 14" blade, 17' x 21" live in feed rolls hydraulic drive, 22" x 6' dead out feed rolls with material stops

137

Material Unscrambler
4 strand, 42" tall, 11' wide, hydraulic drive with air hydraulic control valve.

138

3 Strand In Feed Deck
9' x 9' hydraulic drive

139

Rip Saw
Set up for line shaft, 14" blade hydraulic drive feed rolls.

139A

Carbide Tip Blades 14"
1 1/2" arbor, 10 pc. Fresh sharpened

140

Accura Planer
Model: WJ28, SN 31211637, set up for line shaft.

141

Single Head Notcher
Manual loading with power feed, 9" wide head, set up for line shaft.

142

J.A. Fay Planer
Set up for line shaft.

143

Dado Cutter
Hydraulic drive, 1 1/2" wide blade.

144

Heavy Duty Drill Press
Model: 170F, hydraulic drive.

145

10" table saw
Model: TSC-10, SN: 47058, hydraulic drive.

146

Perkins Power Unit
2900 hours since complete rebuild, 4 cylinder diesel, with clutch.

147

Air Compressor
Belt drive, with adjustable mount

148

Line Shaft, Hydraulic Tank, and Hydraulic Pumps
3 hydraulic pumps

149

Air Tank
40" x 8'

150

Fuel Tank
67" x 3' with stand

151

36" Dust Blower
Hydraulic drive, with all pipes to and from blower

152

Storage Cabinet
32" wide x 6' tall x 24" deep

153

Material Rack
3' x 3' square 6' tall, 5 shelves

154

Material Racks
3' wide x 2' deep x 6' tall, 8' wide x 3' deep x 7' tall

155

Material Rack
4' wide x 3' deep x 6' tall

156

Material Rack
5' wide x 3' deep x 6' tall

157

Lumber Cart
3' wide x 6' long, two wheels swivel.

158

Board Stacking Rack
4' x 4' x 8' steel rack.

163

Toyota Forklift
Model: 7FGU18, SN: 61456, 7,742 hours, 2 stage mast, side shift, 4" x 42" forks, propane or regular gas, no tank included, solid rubber tires, 3300 lb capacity, 7' mast. One owner unit that was well maintained and is ready to go.

164

2005 Komatsu WA150-5 Wheel Loader
SN: KMTWA051C01071803
Meter reads: 6,328 hours
Engine: Komatsu 3.9L
Fuel type: Diesel
ROPS: Enclosed
3rd Valve: No
Tire Size: 17.5 R25
Attachments: Log forks
Heater: Yes
A/C: Yes
Quick Attach: No

Features and Notes: Joystick boom control, well maintained, one owner machine that is production ready.

164A

Tire Chains for Loader

165

1949 John Deere A Tractor
SN: 616435
Engine: 2 cylinder
Fuel type: Gas
Transmission: 4 speed standard
Drive: 2 wheel
Rear PTO: Yes
3 Point hitch: No

Features and Notes: Belt pulley, aux hydraulic, runs strong.

164B

Case W20C Wheel Loader*
2 lever boom control, no third valve, has heat/AC, pin on forks,sells with forks, runs and operates.

164C

Bucket for W20C*
Pin on dirt bucket.

165A

Massey Ferguson 50 Tractor*
SN: SGM5000I7
Meter reads: 1,367 hours
Engine: 4 cylinder
Transmission type: 3 speed with high and low
Fuel type: Gas
Rear PTO: Yes
3 Point hitch: Yes

Features and Notes: 1,367 hours after rebuilt, new battery, rubber on steel wheels. Contact Allen with any questions 330-600-0754

166

2001 John Deere 250 Skid Steer
SN: KV0250A251321
Meter reads: 18.5 hours
Engine: John Deere 2.9L
Fuel type: Diesel
ROPS: Open
2 Speed: No
Highflow: No
Attachments: None
A/C: No
Heater: No

Features and Notes: Over $9000 spent on overhaul for parts alone, new brake system, 18.5 hours on overhaul, low hours on new hydraulics, runs strong.

166A

Quick Attach Forks
4" x 42" forks, skid steer quick attach

167

Hawk Line 3 Point Drag Grader
8', 3 pt. mount

168

Bessemer Hit and Miss Engine
Pulley with clutch

169

Ford Power Unit
MN: 786091-G15-TB, SN: AHE-0290-2BB, 3.7L, diesel, clutch with pulley

169A

Case Power Unit 4 Cylinder Diesel
SN: M56 CBLCCFCDECFAMKFAAKR, motor reads 3017 hours, clutch, control panel, approx 75 HP. one owner unit that was well maintained and is production ready

170

4 Strand Transfer Deck
11' x 13', no drive

170A

2 Strand Transfer Deck
46" x 18', no chain, no sprockets, no drive

171

Dust Blower 36" Portable
13" inlet, 12" outlet, mounted on trailer, no power

172

Electric Motor and Gear Boxes
2 hp. Electric, 2 gear boxes

173

Deck Chain
All chain on pallet

174

Deck Chain 81X
All chain and sprocket on pallet

175

Sprockets and Pulley
Skid of parts, pulleys, sprockets, chain, connecting links

175A

Pulleys
Skid of used pulleys

176

Antique Chain Saws
Includes Stihl, Sears, Pioneer, Craftsman, McCulloch, Wright, Powerline, David Bradley, Condition unknown.

177

Hoffco Scythette Brush Cutter
SN: 9441, hand held brush cutter, 10" cutting bar, condition unknown.

178

Stacking Racks
1 pc. 4' x 4' x 4', 1 pc. 42" x 42" x 48", 1 pc. 36" x 48" x 38"

179

Stacking Shelves
36" x 36" x 8'

180

Pallet Racks
2 pc. 42" x 8' end frames, 6 pc. 8' cross members, 16 pc. 9' cross members, boards for shelfing

181

Slip on Dust Bucket
92" x 5" x 48", tie down chain

182

Wooden Scrap Box
6' x 42" x 42"

183

Deer Transport Box
4' x 44" x 36", 2 compartments, carry handles

184

Truck Box and Air Tanks
4' x 2' x 2' tool box, 2 pc. Vertical air tanks

185

Baker Control Boxes
Electrical breaker and fuse box with variable speed drive

186

Steel Lug Wheels
42" 6 hole steel wheels, 17-5L-24 Bolton tire, 13-6-28 bolt on tire

186A

Solid Rubber Wheels*
7" x 16" inside, 1 rim w/ tire 6.50 - 16. 3 pieces

187

Skid Steer Wheels with Solid Rubber Tires
30-10-16, 8 lugs

187A

Spartan Equipment Generator E9500
SN: GTB 6670, new unit, 20 and 30 amp outlets, portable

188

Lincoln Portable Welder
MN: AC 150, SN: A-952153, Kohler 10 hp gas engine.

189

Emglo Twin Tank Portable Air Compressor
10 hp Honda gas engine, engine not starting

190

Air Compressor on Tank
MN: 320, SN: 209605, Honda GX160 gas engine, vertical tank

191

Hawke Shop Press
60,000 lbs., no Jack

192

Slider Window
36" x 32" slider window

193

Work Bench Wood Top
7' x 30" workbench with vise, tool drawer. Contact Allen with any questions 330-600-0754

193A

Work Bench with drawers
6' x 24" x 35"

193B

Work Bench with drawers
6' x 24" x 35"

194

Hydraulic Tank, Rollers, and Deck Chain
24" x 16" x 12" hydraulic tank, 2 1/2" x 17 1/2" conveyor rolls, deck chain

195

Hydraulic Tank
18" x 18" x 16", valve and filter

196

V-Belts
New and used belts

197

New! Fuel Transfer Pump 12 V
New in box, includes wire and hose

197A

Gas Boy Fuel Pump
Manual pump with hose

198

Truck Hitch Adjustable
Fits 2" Reese hitch

199

Hydraulic Hose with Elbow Ends
3/4" hose, male pipe one end JIC elbow one end, assorted length, 11 pc.

199A

3" Coil Pallet Nails
11 boxes

199B

Sure Fit 3 1/2" Wire Coil Pallet Nails
12 1/2 boxes

199C

1" Coil Roofing Nails
1 box

199D

Pulley on Hook

200

Do-All Metal Cutting Bandsaw
Model: DBW, SN: 2462917C, 220V 1ph, variable speed, edging stone, oiler, light, 16" throat capacity, electric drive. Contact Allen with any questions 330-600-0754

201

Kalamazoo Metal Bandsaw
Model: P-46, SN: 10123, 9" x 16" capacity, electric drive, 1 new blade #16. Contact Allen with any questions 330-600-0754

202

Kondia Powermill Milling Machine
Model: FV-1, SN: 102-1, electric drive, extra tools, power feed table. Contact Allen with any questions 330-600-0754

203

Brown Sharper Horizontal Milling Machine
Electric drive, lots of extra tooling. Contact Allen with any questions 330-600-0754

204

SIP Jig Boring Machine
Model: MP-3K, SN: 304, extra tooling, electric drive. Contact Allen with any questions 330-600-0754

205

Covel Surface Grinder
Model: 35, SN: 35-140, 8" x 24" capacity, electric drive. Contact Allen with any questions 330-600-0754

206

Hamond Surface Grinder
Model: 2, SN: 1116-51, 6" x 18" capacity, electric drive, Brown + Sharp Magnetic chuck, extra tooling. Contact Allen with any questions 330-600-0754

207

LeBlond Regal Metal Lathe
13" x 30" capacity, with tooling, electric drive. Contact Allen with any questions 330-600-0754

207A

Layout Plates
15" x 20", 3 pc. Contact Allen with any questions 330-600-0754

207B

Machinist Vice
8 1/2"

208

Klopp Metal Mill
Electric drive. Contact Allen with any questions 330-600-0754

209

Floor Model Drill Press
Heavy duty, electric drive, 6" throat, 4" stroke. Contact Allen with any questions 330-600-0754

210

Index Machine Vertical Mill
Electric drive, powered table. Contact Allen with any questions 330-600-0754

211

Royal Double Drill Press
SN: 16-21204, 8" throat, 5" stroke, electric drive. Contact Allen with any questions 330-600-0754

212

South Bend Lathe
10" x 30 capacity, extra tooling. Contact Allen with any questions 330-600-0754

213

Majestic Grinder Mill
ID-OD grinder. Contact Allen with any questions 330-600-0754

214

Floor Model Drill Press
4" stroke, 7" throat, electric drive, variable speed. Contact Allen with any questions 330-600-0754

215

Sonnet Honing Machine
Electric drive, extra stones. Contact Allen with any questions 330-600-0754

216

Scripta Pantograph Copy Mill
Operators manual. Contact Allen with any questions 330-600-0754

217

K.O. Lee Tool Cutter
Model: A600, SN: 1498, electric drive. Contact Allen with any questions 330-600-0754

218

Niagara Metal Shear
Model: 42-F, SN: 48966, Mild steel capacity 42" -16 ga, guide. Contact Allen with any questions 330-600-0754

219

Stacking Racks
30" x 41" x 8", 10 pc.

220

Fairbanks Platform Scales
With parts. Contact Allen with any questions 330-600-0754

221

CAT FC40 Tow Motor Battery Powered
SN: 544374, 15526 hours, 4" x 42" forks, 83" high mast, 2 stage, side shift, brakes need fixed, battery is weak, runs and operates. Contact Allen with any questions 330-600-0754

222

Hydraulic Pak
32" x 68" x 25" tanks, steel platform, 2 Baldor 30 hp. Electric motors with pumps, oil cooler radiator, wires to motors. Contact Allen with any questions 330-600-0754

223

Hydraulic Pak
4' x 5' x 2' tank on stand, 2 hydraulic pumps on mounts, air control valve, no power. Contact Allen with any questions 330-600-0754

224

Lumber Cart
28" x 90", tongue steer, solid rubber wheels. Contact Allen with any questions 330-600-0754

225

Bandsaw Blades and Parts
New 8 pc. 1 1/4" bandsaw blades for Wood-Mizer multi-head resaw, parts for Wood-Mizer resaw. Contact Allen with any questions 330-600-0754

226

Chains 5/16" with hooks
2 pc. 10", 1 pc. 7" Contact Allen with any questions 330-600-0754

227

Stihl MS 290 Chainsaw
20" bar, case. Contact Allen with any questions 330-600-0754

228

Ridge Metal Chopsaw 14"
Electric motor. Contact Allen with any questions 330-600-0754

229

Cleereman 36" Carriage
SN: 36-307, MN: 36, 3 head block, air dogs, tapers, setworks, 16' long, 50" wide center to center wheels, no control, 6" x 6" frame, 5/8" dogs. Contact Daniel Miller with any questions 440-321-5965

230

Timber Wolf Rosser Head Debarker
(1st of an entirety) hydraulic pump, runs and operates, extra pump and head motor, head hydraulic powered, bull wheels hydraulic powered, barn sweep bark conveyor, pantograph, 3" x 24" bull wheels, 12' outside to outside bull wheels, 30" x 16' capacity, 36" x 20' flat 16' slant barn sweep. Sold offsite. Location: 51584 TR 214B, Fresno, OH 43824

231

Perkins Power Unit
(Part of an entirety) MN: 5791/2400, SN: U137125G, 75 hp, 4760 hours, Murphy controls with shut down, no pump, in good condition. Sold offsite. Location: 51584 TR 214B, Fresno, OH 43824

232

Debarker Entirety of Lot 230-231
With 10% raise. Sold offsite. Location: 51584 TR 214B, Fresno, OH 43824

233

90-Degree Green Chain
Has poly chain, hydraulic drive, Made by Mill Innovation Designs

234

Frevert Lathe*
Hydraulic drive. Contact Allen with any questions 330-600-0754

235

Delta Rockwell Drill Press*
3 head drill press, air powered with foot pedal control. Contact Allen with any questions 330-600-0754

236

Craftsman Rip Table*
8" blade, belt drive, no drive motor. Contact Allen with any questions 330-600-0754

237

Hankison After Cooler*
SN: T49097, Model: ACH 300, Air cooled, 2 electric drive fans, 300 CFM. Contact Allen with any questions 330-600-0754

238

22" Squirrel Cage Blower*
SN: 21287, setup for belt drive. Contact Allen with any questions 330-600-0754

239

Trailer Axle with Wheels and Tires*
3' long leaf springs. Contact Allen with any questions 330-600-0754

240

Steel Crate*
60" w x 30" deep, 44" high. Contact Allen with any questions 330-600-0754

241

Banding Tools
10 pc. tighteners and crimpers

242

Control cables, Oil Filters , and Belts
Control cable for encoder to computer, all parts on skid.

243

Welding Helmets
2 pc.

244

Chain Binders, Hydraulic Motor, Gauges, Wheels
All parts on skid

245

4' x 4' Operating Cab

246

Tool Lot*
Hand tools, pipe fittings, air hose

247

Privacy Fence Boards
3/4" x 5" x 48" long, 60 pieces total.

Photo Gallery

Share This Listing

Other Sales by
This Company

Jan 1
Des Arc, AR

Oct 1
Middlebury, IN

Green Ridge Wood Products

Bright Star Realty and Auctions, INC

Contact: Loren Beachy
Phone: 574-825-0704

51450 Township Rd 220
Baltic, OH 43804

Thursday Jun 1, 2023 Completed

Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded where required.
Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer:

Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.
Governing Law.
1. For Auctions in the State of Indiana and Online. Unless otherwise indicated, all Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are deemed to be entered into in the State of Indiana, all bids and payments are deemed to be received in the State of Indiana, and the contract, if any, will be deemed to be formed and entered into in the State of Indiana.
Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.
Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
Nature of the Auction. This Property is being sold at the Auction in the manner indicated on the first page of this Agreement.
Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
2. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
3. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
4. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
5. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
6. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
7. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
8. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.
9. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties, (i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
10. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
11. No Reduction or Retraction of Online Bids. Online bids may not be reduced or retracted.
12. Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.
13. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.
Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). All prebids and maxbids placed online are considered absentee bids. Auctioneer pledges complete integrity in the treatment of absentee bids and absentee bids may be initiated and advanced in accordance with Auctioneer’s policies and procedures. Auctioneer has the right to initiate any absentee bids at 25% to 50% of their maximum amount. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot of Personal Property will be the Buyer of such Property.
All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.
Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or representation by Auctioneer.
Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ringman, or multiple bid assistants or ringmen, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked-Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases are due upon receipt of your invoice. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. If onsite bidders wish to send a wire, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.
Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Tools, packing material, and/or assistance will not be supplied at Pickup, so Buyer must plan accordingly. Disassembly and removal shall be done in a quiet and workmanlike manner, and each Buyer, in making its bid, shall thereby indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer’s employees, agents, representatives, or independent contractors in connection with the Pickup. Any and all damages to the Pickup site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller. Each Buyer must show a copy of the invoice (digital or hard copy) and government-issued photo identification before Lots will be released. No Buyer shall bring pets or young children to the Pickup, as the movement of Lots presents an extremely high-risk environment that could result in injury or death.
Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them. In addition, Buyer’s bidding privileges may be suspended at future auctions.
Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.
No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.
Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled to specific performance or other equitable relief.
Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim or suit relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their rights.

Listing Details
Type of Auction: Sawmill and Precut Line liquidation Highlight Pieces: New Holland and Komatsu wheel loaders, Toyota forklifts, 3 Head Baker resaw, like new Millcreek sizer and chop saw, Baker de-duster, John Deere power unit and complete hydraulic system. 00 Information Lot Type of Auction: Sawmill and Precut Line liquidation Highlight Pieces: Komatsu wheel loader, Toyota forklift, 3 Head Baker resaw, like new Millcreek sizer and chop saw, Baker de-duster, John Deere power unit and complete hydraulic system. Buyers have option to buy complete precut line and lease the building for up to two years. Auction/Seller Story: Green Ridge Wood Products in Baltic OH, is liquidating their complete sawmill and pre-cut line. Equipment such as Komatsu wheel loaders, Toyota forklifts, a 3 Head Baker resaw, like-new Millcreek sizer and chop saw, Baker de-duster, John Deere power unit, and hydraulic system will be sold at no reserve auction. Most equipment was purchased new in 2018 but is being sold due to the owner's battle with COVID-19 and their decision to pursue other income streams. Consignments are welcome with seller-provided unloading by appointment. Don't miss this chance to buy high-quality equipment from a reputable seller. Buyers have the option to buy the complete, late model, pre-cut line and lease the property for up to two years. 01 Preview Lot Week of auction from 8-4 or by appointment. 02 Loadout Information Daniel (330-897-0909) will provide loading for smalls for the first 2 days after the auction. Everything must be removed in 30 days Riggers: Nick Neuenshwander Metal Monkey 330.231.1490. By appointment only. 03 Payment Information Payment terms: Cash, check, wire transfer. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice. Onsite buyers, payment is due the day of the auction. If onsite bidders wish to send a wire and still be assessed only the onsite buyer’s premium, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. 10 3156G Live Heel Log Loader 1/50 Die-Cast Metal Replica Have fun buying a high-quality, die-cast toy! All proceeds including buyer's premium will go to Feed My Starving Children (FMSC) which is a Christian nonprofit dedicated to seeing every child and person around the world healthy, nourished and whole in body and spirit. Bright Star will pay for standard shipping and handling to the 48 contiguous states for buyers of this lot. https://www.youtube.com/watch?v=jYATxeDmuzM&t=8s 11 Manual Sealless Steel Strapping Tool Model A333, works for 1/2" 5/8" or 3/4" banding, new in box. Shipping available for $30 12 Heavy Equipment Key Set 36 Keys Shipping available for $20 46 Jockey Grinder MN: 97H, Milwaukee drill powered 47 Electric Saw Sharpener Saw arbor guided 48 Signode Poly Banding Cart MN: DF-10D, 1/2" poly strapping on cart, 1 roll 5/8" poly strapping 49 Signode Poly Banding Cart MN: DD-1A, has 7/16" poly strapping 50 Banding Tools and Cart Steel banding tightener and crimper, Signode model DF15 cart 51 Signode Banding Tool Tightener and cutter, for 1/2" poly banding 60 Meadows # 2 Hydraulic Carriage 3 HB (1st of an entirety) SN: 20-0027-02, 15' x 38" center to center wheel base, 110 V over hydraulic controls, hydraulic dogs, tapers, setworks, digital electronic setworks, panagraph, 2 headblock have live dogs and tapers, one is manual, New in 2002 not used hard, one owner used mostly for a hobby. 61 Wood Frame Husk 56" (Part of an entirety) 4' x 7' frame, live outfeed rolls with hydraulic motor, 56" saw, no control valves, 20" dust blower pipe to bin 62 Track and Frame with Carriage Drive (Part of an entirety) 45' track, cable drum with hydraulic motor and control valve 63 Roll Case (Part of an entirety) 24" x 6' live roll case, 6 1/2" x 19 1/2" rolls, no drive 64 Meadows Mill Entirety of Lots 60-63 With 10% raise. 65 Meadows 40" Log Turner Hydraulic drive, control valve 66 3 Strand Log Deck with Stop'n'Load 8' x 22' plus 42" nose skids, Tulsa winch drive with hydraulic motor, hydraulic stop'n'load 66A 56" Sawblade B style 66B Cable 3/8" for Carriage Drive New cable, length unknown 67 Mud Saw 3/4" x 8" cutter, 6' arm, hydraulic drive, control valve 68 Hydraulic Tank and Pumps (1st of an entirety) 3 hydraulic pumps, 54" x 48" x 36" tank, all hydraulic lines going to equipment and pumps 69 1989 Cummins Diesel Engine (Part of an entirety) MN: C Series, 150 hp, 3352 hours, 8.3L, Model SP114P1 clutch with pulley, WinCo generator 2400 watts, 120 V, in very good condition 70 Line Shaft and Belts (Part of an entirety) 2 7/16" x 16' shaft, pulleys and belts, belt tightener, steel supports 71 Diesel and Line Shaft Entirety of Lots 68-70 With 10% raise. 72 Meadows 3 Saw Edger SN: 867X-66, 2 moving saws, 1 stationary saw, 4" x 36" capacity, hydraulic drive. 73 Dust Blower 16" 6" inlet, 4" outlet, no drive, includes pipe to bin 74 Irvington Swing Arm Chop Saw Hydraulic motor, 14" blade 75 Skate Rolls 2 sections 20" x 10', 2 pc. 28" x 10' 76 Slab Racks 38" x 40", 4 pc. 77 Fuel Tank on Stand 30" x 48" 78 Air Tank 30" x 10' 100 Baker 3 Head Band Saw (1st of an entirety) Model: BRR-O, SN: 98-2531, hydraulic motor on heads, hydraulic feed, 7/8" x 28' wheels, 1 1/4" bands, 6" feed belt, Air Bag blade tension, includes hydraulic control valves. 101 Cant Sizer Build By Millcreek Machine (Part of an entirety) 5" cutter head carbide tips, hydraulic drive, 5" wide feed belt, hydraulic drive side press rolls, 6" dust outlet, includes hydraulic control valves, cant capacity 5 1/2" x 11". 102 Millcreek Machine Up Cut Chop Saw (1st of an entirety) 22" blade hydraulic drive, air lift cylinder, dual press safety switch, 22" x 8' live out feed roll, air cylinder material stops. 103 Live In Feed Rolls Millcreek Machine (Part of an entirety) 22" x 12', 4 1/2" x 18" rolls, air side press arms, hydraulic control valve. 104 3 Strand In Feed Deck (Part of an entirety) 8' x 8' hydraulic drive 105 4 Strand Unscrambler (Part of an entirety) 9' x 4' hydraulic drive, with air control valve 106 Live Out Feed Rolls (Part of an entirety) 22" x 7', 4 1/2" x 18" rolls, hydraulic drive, air side kickers, automatic switch for kicker. 107 Skate Rolls (Part of an entirety) 4 strand, 4 1/2' long, 6" x 6 1/2' landing table. 108 Cut Up Line Entirety of Lots 102 - 107 With 10% raise. 109 Turn Around Belt by Millcreek Machine (Part of an entirety) 33" 68" belt, 6" x 66" popup transfer belt, sidekick cant transfer, hydraulic driven, air lift cylinder, air hydraulic control valve, 8" x 20" fill in table. 110 Live Transfer Belt (Part of an entirety) 6" x 17' hydraulic drive, no controls. 111 Turn Around Table (Part of an entirety) 33" x 88", 44" pop up live rolls. 112 Baker M4I Deduster (Part of an entirety) Model: BDD-O, SN: 19-553, electric drive, 3 head Nylon brushes, with cut out box. 113 Live Out Feed Belt (Part of an entirety) 44" x 20' electric drive 114 Groove Cutting Machine (Part of an entirety) 1" wide cutting head, hydraulic drive, hydraulic feed rolls air press down, air hydraulic control valve. 115 Chop Saw (Part of an entirety) 12" blade, 15" x 5' dead rolls, material stops, hydraulic drive, with air hydraulic control valve, manual cut. 116 42" Reckart Dust Blower (Part of an entirety) 18" inlet, 18" outlet, hydraulic drive. 117 Dust Cyclone (Part of an entirety) 6' x 12' with 18" pipe from blower. 1 pc. 18’’ x 18’ , 1pc. 18’’ x 8’ , 90 degree elbow 118 Dust Pipe (Part of an entirety) All pipe from equipment to blower. 2 pc. 22 degree elbows , 1 pc 18’’ x 11’6’’ pipe , 58’ pipe stepped down with 6’’ x 6’ drops to equipment 119 John Deere Power Unit (1st of an entirety) SN: PE6068H732172, 6.8L 225 hp, 3000 hours since complete rebuild, with NACD clutch. 120 Lima Mac Generator (Part of an entirety) Model: 440MDL0861, SN LC-0000148-1514, 60 KW, 208/240 V, 440 frame, with cut out box, no wires included. 121 GE Transformer (Part of an entirety) 75.0 KVA, 60HZ, 3 ph., electrical conduit with 50' wire included 122 Air Compressor (Part of an entirety) SN: 010117-111, belt drive with adjustable mount. 123 Electrical Conduit with Wire 50' wire and conduit 123 Line Shaft and Hydraulics (Part of an entirety) 700 gallon hydraulic tank, hydraulic pumps, hydraulic valves, line shaft, hydraulic lines going to equipment. 123A John Deere Power Unit and Hydraulic System Entirety of Lot 119 - 123 With 10% raise. 124 Master Tieback from Lots 100-123 With 10% raise. Buyer has the opportunity to buy complete precut line and lease the property for up to two years 124A Wood-Mizer HR120 Resaw MN: HR120G25, SN: 09091010, 25 hp, 2310 hours, Kohler Command Pro 25 gas engine, electric start, 12" x 6' feed belt, 1 1/4" bands, 7/8" x 19" wheels with v belts 124B 3 Electric Motors for Baker Resaw MN: 1799A, 20 hp, 1765 rpm, 256 T frame, 3 ph, off of Baker resaw, 1 adjustable mount, cord, in good condition 125 Air Tank 9' x 3' 126 Fuel Tank 38" x 60" on skids 127 Fuel Tank 38" x 60" on skids 128 1 1/4" Bandsaw Blades 12 new blades 129 1 1/4" Bandsaw Blades 45 used blades 130 Self Dumping Hopper 1 cu. Yard hopper 131 Self Dumping Hopper 4' x 3' x 2' 132 Trash Hopper 6' x 5' x 4' hopper, with 7" x 3" fork pockets, heavy duty 3/8" metal 133 Scrap Rack 47" x 35" x 38" 134 Material Rack 15' long 40" at one end and 20" at other 135 Metal Shelf 10' long, 4' deep 6' tall 136 Swing Arm Cut Off Saw Hydraulic drive 14" blade, 17' x 21" live in feed rolls hydraulic drive, 22" x 6' dead out feed rolls with material stops 137 Material Unscrambler 4 strand, 42" tall, 11' wide, hydraulic drive with air hydraulic control valve. 138 3 Strand In Feed Deck 9' x 9' hydraulic drive 139 Rip Saw Set up for line shaft, 14" blade hydraulic drive feed rolls. 139A Carbide Tip Blades 14" 1 1/2" arbor, 10 pc. Fresh sharpened 140 Accura Planer Model: WJ28, SN 31211637, set up for line shaft. 141 Single Head Notcher Manual loading with power feed, 9" wide head, set up for line shaft. 142 J.A. Fay Planer Set up for line shaft. 143 Dado Cutter Hydraulic drive, 1 1/2" wide blade. 144 Heavy Duty Drill Press Model: 170F, hydraulic drive. 145 10" table saw Model: TSC-10, SN: 47058, hydraulic drive. 146 Perkins Power Unit 2900 hours since complete rebuild, 4 cylinder diesel, with clutch. 147 Air Compressor Belt drive, with adjustable mount 148 Line Shaft, Hydraulic Tank, and Hydraulic Pumps 3 hydraulic pumps 149 Air Tank 40" x 8' 150 Fuel Tank 67" x 3' with stand 151 36" Dust Blower Hydraulic drive, with all pipes to and from blower 152 Storage Cabinet 32" wide x 6' tall x 24" deep 153 Material Rack 3' x 3' square 6' tall, 5 shelves 154 Material Racks 3' wide x 2' deep x 6' tall, 8' wide x 3' deep x 7' tall 155 Material Rack 4' wide x 3' deep x 6' tall 156 Material Rack 5' wide x 3' deep x 6' tall 157 Lumber Cart 3' wide x 6' long, two wheels swivel. 158 Board Stacking Rack 4' x 4' x 8' steel rack. 163 Toyota Forklift Model: 7FGU18, SN: 61456, 7,742 hours, 2 stage mast, side shift, 4" x 42" forks, propane or regular gas, no tank included, solid rubber tires, 3300 lb capacity, 7' mast. One owner unit that was well maintained and is ready to go. 164 2005 Komatsu WA150-5 Wheel Loader SN: KMTWA051C01071803 Meter reads: 6,328 hours Engine: Komatsu 3.9L Fuel type: Diesel ROPS: Enclosed 3rd Valve: No Tire Size: 17.5 R25 Attachments: Log forks Heater: Yes A/C: Yes Quick Attach: No Features and Notes: Joystick boom control, well maintained, one owner machine that is production ready. 164A Tire Chains for Loader 165 1949 John Deere A Tractor SN: 616435 Engine: 2 cylinder Fuel type: Gas Transmission: 4 speed standard Drive: 2 wheel Rear PTO: Yes 3 Point hitch: No Features and Notes: Belt pulley, aux hydraulic, runs strong. 164B Case W20C Wheel Loader* 2 lever boom control, no third valve, has heat/AC, pin on forks,sells with forks, runs and operates. 164C Bucket for W20C* Pin on dirt bucket. 165A Massey Ferguson 50 Tractor* SN: SGM5000I7 Meter reads: 1,367 hours Engine: 4 cylinder Transmission type: 3 speed with high and low Fuel type: Gas Rear PTO: Yes 3 Point hitch: Yes Features and Notes: 1,367 hours after rebuilt, new battery, rubber on steel wheels. Contact Allen with any questions 330-600-0754 166 2001 John Deere 250 Skid Steer SN: KV0250A251321 Meter reads: 18.5 hours Engine: John Deere 2.9L Fuel type: Diesel ROPS: Open 2 Speed: No Highflow: No Attachments: None A/C: No Heater: No Features and Notes: Over $9000 spent on overhaul for parts alone, new brake system, 18.5 hours on overhaul, low hours on new hydraulics, runs strong. 166A Quick Attach Forks 4" x 42" forks, skid steer quick attach 167 Hawk Line 3 Point Drag Grader 8', 3 pt. mount 168 Bessemer Hit and Miss Engine Pulley with clutch 169 Ford Power Unit MN: 786091-G15-TB, SN: AHE-0290-2BB, 3.7L, diesel, clutch with pulley 169A Case Power Unit 4 Cylinder Diesel SN: M56 CBLCCFCDECFAMKFAAKR, motor reads 3017 hours, clutch, control panel, approx 75 HP. one owner unit that was well maintained and is production ready 170 4 Strand Transfer Deck 11' x 13', no drive 170A 2 Strand Transfer Deck 46" x 18', no chain, no sprockets, no drive 171 Dust Blower 36" Portable 13" inlet, 12" outlet, mounted on trailer, no power 172 Electric Motor and Gear Boxes 2 hp. Electric, 2 gear boxes 173 Deck Chain All chain on pallet 174 Deck Chain 81X All chain and sprocket on pallet 175 Sprockets and Pulley Skid of parts, pulleys, sprockets, chain, connecting links 175A Pulleys Skid of used pulleys 176 Antique Chain Saws Includes Stihl, Sears, Pioneer, Craftsman, McCulloch, Wright, Powerline, David Bradley, Condition unknown. 177 Hoffco Scythette Brush Cutter SN: 9441, hand held brush cutter, 10" cutting bar, condition unknown. 178 Stacking Racks 1 pc. 4' x 4' x 4', 1 pc. 42" x 42" x 48", 1 pc. 36" x 48" x 38" 179 Stacking Shelves 36" x 36" x 8' 180 Pallet Racks 2 pc. 42" x 8' end frames, 6 pc. 8' cross members, 16 pc. 9' cross members, boards for shelfing 181 Slip on Dust Bucket 92" x 5" x 48", tie down chain 182 Wooden Scrap Box 6' x 42" x 42" 183 Deer Transport Box 4' x 44" x 36", 2 compartments, carry handles 184 Truck Box and Air Tanks 4' x 2' x 2' tool box, 2 pc. Vertical air tanks 185 Baker Control Boxes Electrical breaker and fuse box with variable speed drive 186 Steel Lug Wheels 42" 6 hole steel wheels, 17-5L-24 Bolton tire, 13-6-28 bolt on tire 186A Solid Rubber Wheels* 7" x 16" inside, 1 rim w/ tire 6.50 - 16. 3 pieces 187 Skid Steer Wheels with Solid Rubber Tires 30-10-16, 8 lugs 187A Spartan Equipment Generator E9500 SN: GTB 6670, new unit, 20 and 30 amp outlets, portable 188 Lincoln Portable Welder MN: AC 150, SN: A-952153, Kohler 10 hp gas engine. 189 Emglo Twin Tank Portable Air Compressor 10 hp Honda gas engine, engine not starting 190 Air Compressor on Tank MN: 320, SN: 209605, Honda GX160 gas engine, vertical tank 191 Hawke Shop Press 60,000 lbs., no Jack 192 Slider Window 36" x 32" slider window 193 Work Bench Wood Top 7' x 30" workbench with vise, tool drawer. Contact Allen with any questions 330-600-0754 193A Work Bench with drawers 6' x 24" x 35" 193B Work Bench with drawers 6' x 24" x 35" 194 Hydraulic Tank, Rollers, and Deck Chain 24" x 16" x 12" hydraulic tank, 2 1/2" x 17 1/2" conveyor rolls, deck chain 195 Hydraulic Tank 18" x 18" x 16", valve and filter 196 V-Belts New and used belts 197 New! Fuel Transfer Pump 12 V New in box, includes wire and hose 197A Gas Boy Fuel Pump Manual pump with hose 198 Truck Hitch Adjustable Fits 2" Reese hitch 199 Hydraulic Hose with Elbow Ends 3/4" hose, male pipe one end JIC elbow one end, assorted length, 11 pc. 199A 3" Coil Pallet Nails 11 boxes 199B Sure Fit 3 1/2" Wire Coil Pallet Nails 12 1/2 boxes 199C 1" Coil Roofing Nails 1 box 199D Pulley on Hook 200 Do-All Metal Cutting Bandsaw Model: DBW, SN: 2462917C, 220V 1ph, variable speed, edging stone, oiler, light, 16" throat capacity, electric drive. Contact Allen with any questions 330-600-0754 201 Kalamazoo Metal Bandsaw Model: P-46, SN: 10123, 9" x 16" capacity, electric drive, 1 new blade #16. Contact Allen with any questions 330-600-0754 202 Kondia Powermill Milling Machine Model: FV-1, SN: 102-1, electric drive, extra tools, power feed table. Contact Allen with any questions 330-600-0754 203 Brown Sharper Horizontal Milling Machine Electric drive, lots of extra tooling. Contact Allen with any questions 330-600-0754 204 SIP Jig Boring Machine Model: MP-3K, SN: 304, extra tooling, electric drive. Contact Allen with any questions 330-600-0754 205 Covel Surface Grinder Model: 35, SN: 35-140, 8" x 24" capacity, electric drive. Contact Allen with any questions 330-600-0754 206 Hamond Surface Grinder Model: 2, SN: 1116-51, 6" x 18" capacity, electric drive, Brown + Sharp Magnetic chuck, extra tooling. Contact Allen with any questions 330-600-0754 207 LeBlond Regal Metal Lathe 13" x 30" capacity, with tooling, electric drive. Contact Allen with any questions 330-600-0754 207A Layout Plates 15" x 20", 3 pc. Contact Allen with any questions 330-600-0754 207B Machinist Vice 8 1/2" 208 Klopp Metal Mill Electric drive. Contact Allen with any questions 330-600-0754 209 Floor Model Drill Press Heavy duty, electric drive, 6" throat, 4" stroke. Contact Allen with any questions 330-600-0754 210 Index Machine Vertical Mill Electric drive, powered table. Contact Allen with any questions 330-600-0754 211 Royal Double Drill Press SN: 16-21204, 8" throat, 5" stroke, electric drive. Contact Allen with any questions 330-600-0754 212 South Bend Lathe 10" x 30 capacity, extra tooling. Contact Allen with any questions 330-600-0754 213 Majestic Grinder Mill ID-OD grinder. Contact Allen with any questions 330-600-0754 214 Floor Model Drill Press 4" stroke, 7" throat, electric drive, variable speed. Contact Allen with any questions 330-600-0754 215 Sonnet Honing Machine Electric drive, extra stones. Contact Allen with any questions 330-600-0754 216 Scripta Pantograph Copy Mill Operators manual. Contact Allen with any questions 330-600-0754 217 K.O. Lee Tool Cutter Model: A600, SN: 1498, electric drive. Contact Allen with any questions 330-600-0754 218 Niagara Metal Shear Model: 42-F, SN: 48966, Mild steel capacity 42" -16 ga, guide. Contact Allen with any questions 330-600-0754 219 Stacking Racks 30" x 41" x 8", 10 pc. 220 Fairbanks Platform Scales With parts. Contact Allen with any questions 330-600-0754 221 CAT FC40 Tow Motor Battery Powered SN: 544374, 15526 hours, 4" x 42" forks, 83" high mast, 2 stage, side shift, brakes need fixed, battery is weak, runs and operates. Contact Allen with any questions 330-600-0754 222 Hydraulic Pak 32" x 68" x 25" tanks, steel platform, 2 Baldor 30 hp. Electric motors with pumps, oil cooler radiator, wires to motors. Contact Allen with any questions 330-600-0754 223 Hydraulic Pak 4' x 5' x 2' tank on stand, 2 hydraulic pumps on mounts, air control valve, no power. Contact Allen with any questions 330-600-0754 224 Lumber Cart 28" x 90", tongue steer, solid rubber wheels. Contact Allen with any questions 330-600-0754 225 Bandsaw Blades and Parts New 8 pc. 1 1/4" bandsaw blades for Wood-Mizer multi-head resaw, parts for Wood-Mizer resaw. Contact Allen with any questions 330-600-0754 226 Chains 5/16" with hooks 2 pc. 10", 1 pc. 7" Contact Allen with any questions 330-600-0754 227 Stihl MS 290 Chainsaw 20" bar, case. Contact Allen with any questions 330-600-0754 228 Ridge Metal Chopsaw 14" Electric motor. Contact Allen with any questions 330-600-0754 229 Cleereman 36" Carriage SN: 36-307, MN: 36, 3 head block, air dogs, tapers, setworks, 16' long, 50" wide center to center wheels, no control, 6" x 6" frame, 5/8" dogs. Contact Daniel Miller with any questions 440-321-5965 230 Timber Wolf Rosser Head Debarker (1st of an entirety) hydraulic pump, runs and operates, extra pump and head motor, head hydraulic powered, bull wheels hydraulic powered, barn sweep bark conveyor, pantograph, 3" x 24" bull wheels, 12' outside to outside bull wheels, 30" x 16' capacity, 36" x 20' flat 16' slant barn sweep. Sold offsite. Location: 51584 TR 214B, Fresno, OH 43824 231 Perkins Power Unit (Part of an entirety) MN: 5791/2400, SN: U137125G, 75 hp, 4760 hours, Murphy controls with shut down, no pump, in good condition. Sold offsite. Location: 51584 TR 214B, Fresno, OH 43824 232 Debarker Entirety of Lot 230-231 With 10% raise. Sold offsite. Location: 51584 TR 214B, Fresno, OH 43824 233 90-Degree Green Chain Has poly chain, hydraulic drive, Made by Mill Innovation Designs 234 Frevert Lathe* Hydraulic drive. Contact Allen with any questions 330-600-0754 235 Delta Rockwell Drill Press* 3 head drill press, air powered with foot pedal control. Contact Allen with any questions 330-600-0754 236 Craftsman Rip Table* 8" blade, belt drive, no drive motor. Contact Allen with any questions 330-600-0754 237 Hankison After Cooler* SN: T49097, Model: ACH 300, Air cooled, 2 electric drive fans, 300 CFM. Contact Allen with any questions 330-600-0754 238 22" Squirrel Cage Blower* SN: 21287, setup for belt drive. Contact Allen with any questions 330-600-0754 239 Trailer Axle with Wheels and Tires* 3' long leaf springs. Contact Allen with any questions 330-600-0754 240 Steel Crate* 60" w x 30" deep, 44" high. Contact Allen with any questions 330-600-0754 241 Banding Tools 10 pc. tighteners and crimpers 242 Control cables, Oil Filters , and Belts Control cable for encoder to computer, all parts on skid. 243 Welding Helmets 2 pc. 244 Chain Binders, Hydraulic Motor, Gauges, Wheels All parts on skid 245 4' x 4' Operating Cab 246 Tool Lot* Hand tools, pipe fittings, air hose 247 Privacy Fence Boards 3/4" x 5" x 48" long, 60 pieces total.

Close X

Gallery Images Loading, Please Wait...

Close X

Save this sale to your Saved Sales list!

Your Saved Sales list is an easy way to return to sale listings which are of interest to you.

Login

Username:

Password:

Sign Up

FREE EMAIL NOTIFICATIONS
auction listings delivered to your inbox

Close X

Sign Up

FREE EMAIL NOTIFICATIONS
auction listings delivered to your inbox

Login

Username:

Password:

Return

Green Ridge Wood Products

Live Auction

View Gallery (198)

Auction Date(s)

Thursday Jun 1, 2023 Completed

Auction Location

Baltic, OH 43804

View Map

Company

Bright Star Realty and Auctions, INC

Contact: Loren Beachy
Phone: 574-825-0704
Website: brightstarauctions.com

Listing Terms and Conditions

Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded where required.
Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer:

Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.
Governing Law.
1. For Auctions in the State of Indiana and Online. Unless otherwise indicated, all Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are deemed to be entered into in the State of Indiana, all bids and payments are deemed to be received in the State of Indiana, and the contract, if any, will be deemed to be formed and entered into in the State of Indiana.
Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.
Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
Nature of the Auction. This Property is being sold at the Auction in the manner indicated on the first page of this Agreement.
Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
2. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
3. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
4. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
5. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
6. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
7. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
8. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.
9. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties, (i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
10. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
11. No Reduction or Retraction of Online Bids. Online bids may not be reduced or retracted.
12. Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.
13. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.
Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). All prebids and maxbids placed online are considered absentee bids. Auctioneer pledges complete integrity in the treatment of absentee bids and absentee bids may be initiated and advanced in accordance with Auctioneer’s policies and procedures. Auctioneer has the right to initiate any absentee bids at 25% to 50% of their maximum amount. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot of Personal Property will be the Buyer of such Property.
All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.
Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or representation by Auctioneer.
Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ringman, or multiple bid assistants or ringmen, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked-Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases are due upon receipt of your invoice. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. If onsite bidders wish to send a wire, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.
Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Tools, packing material, and/or assistance will not be supplied at Pickup, so Buyer must plan accordingly. Disassembly and removal shall be done in a quiet and workmanlike manner, and each Buyer, in making its bid, shall thereby indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer’s employees, agents, representatives, or independent contractors in connection with the Pickup. Any and all damages to the Pickup site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller. Each Buyer must show a copy of the invoice (digital or hard copy) and government-issued photo identification before Lots will be released. No Buyer shall bring pets or young children to the Pickup, as the movement of Lots presents an extremely high-risk environment that could result in injury or death.
Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them. In addition, Buyer’s bidding privileges may be suspended at future auctions.
Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.
No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.
Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled to specific performance or other equitable relief.
Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim or suit relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their rights.

Preview Lot
Week of auction from 8-4 or by appointment.

Manual Sealless Steel Strapping Tool
Model A333, works for 1/2" 5/8" or 3/4" banding, new in box. Shipping available for $30

Heavy Equipment Key Set 36 Keys
Shipping available for $20

Jockey Grinder
MN: 97H, Milwaukee drill powered

Electric Saw Sharpener
Saw arbor guided

Signode Poly Banding Cart
MN: DF-10D, 1/2" poly strapping on cart, 1 roll 5/8" poly strapping

Signode Poly Banding Cart
MN: DD-1A, has 7/16" poly strapping

Banding Tools and Cart
Steel banding tightener and crimper, Signode model DF15 cart

Signode Banding Tool
Tightener and cutter, for 1/2" poly banding

Wood Frame Husk 56"
(Part of an entirety) 4' x 7' frame, live outfeed rolls with hydraulic motor, 56" saw, no control valves, 20" dust blower pipe to bin

Track and Frame with Carriage Drive
(Part of an entirety) 45' track, cable drum with hydraulic motor and control valve

Roll Case
(Part of an entirety) 24" x 6' live roll case, 6 1/2" x 19 1/2" rolls, no drive

Meadows Mill Entirety of Lots 60-63
With 10% raise.

Meadows 40" Log Turner
Hydraulic drive, control valve

3 Strand Log Deck with Stop'n'Load
8' x 22' plus 42" nose skids, Tulsa winch drive with hydraulic motor, hydraulic stop'n'load

66A

56" Sawblade
B style

66B

Cable 3/8" for Carriage Drive
New cable, length unknown

Mud Saw
3/4" x 8" cutter, 6' arm, hydraulic drive, control valve

Hydraulic Tank and Pumps
(1st of an entirety) 3 hydraulic pumps, 54" x 48" x 36" tank, all hydraulic lines going to equipment and pumps

1989 Cummins Diesel Engine
(Part of an entirety) MN: C Series, 150 hp, 3352 hours, 8.3L, Model SP114P1 clutch with pulley, WinCo generator 2400 watts, 120 V, in very good condition

Line Shaft and Belts
(Part of an entirety) 2 7/16" x 16' shaft, pulleys and belts, belt tightener, steel supports

Diesel and Line Shaft Entirety of Lots 68-70
With 10% raise.

Meadows 3 Saw Edger
SN: 867X-66, 2 moving saws, 1 stationary saw, 4" x 36" capacity, hydraulic drive.

Dust Blower 16"
6" inlet, 4" outlet, no drive, includes pipe to bin

Irvington Swing Arm Chop Saw
Hydraulic motor, 14" blade

Skate Rolls
2 sections 20" x 10', 2 pc. 28" x 10'

Slab Racks
38" x 40", 4 pc.

Fuel Tank on Stand
30" x 48"

Air Tank
30" x 10'

100

101

102

Millcreek Machine Up Cut Chop Saw
(1st of an entirety) 22" blade hydraulic drive, air lift cylinder, dual press safety switch, 22" x 8' live out feed roll, air cylinder material stops.

103

Live In Feed Rolls Millcreek Machine
(Part of an entirety) 22" x 12', 4 1/2" x 18" rolls, air side press arms, hydraulic control valve.

104

3 Strand In Feed Deck
(Part of an entirety) 8' x 8' hydraulic drive

105

4 Strand Unscrambler
(Part of an entirety) 9' x 4' hydraulic drive, with air control valve

106

Live Out Feed Rolls
(Part of an entirety) 22" x 7', 4 1/2" x 18" rolls, hydraulic drive, air side kickers, automatic switch for kicker.

107

Skate Rolls
(Part of an entirety) 4 strand, 4 1/2' long, 6" x 6 1/2' landing table.

108

Cut Up Line Entirety of Lots 102 - 107
With 10% raise.

109

110

Live Transfer Belt
(Part of an entirety) 6" x 17' hydraulic drive, no controls.

111

Turn Around Table
(Part of an entirety) 33" x 88", 44" pop up live rolls.

112

Baker M4I Deduster
(Part of an entirety) Model: BDD-O, SN: 19-553, electric drive, 3 head Nylon brushes, with cut out box.

113

Live Out Feed Belt
(Part of an entirety) 44" x 20' electric drive

114

Groove Cutting Machine
(Part of an entirety) 1" wide cutting head, hydraulic drive, hydraulic feed rolls air press down, air hydraulic control valve.

115

Chop Saw
(Part of an entirety) 12" blade, 15" x 5' dead rolls, material stops, hydraulic drive, with air hydraulic control valve, manual cut.

116

42" Reckart Dust Blower
(Part of an entirety) 18" inlet, 18" outlet, hydraulic drive.

117

Dust Cyclone
(Part of an entirety) 6' x 12' with 18" pipe from blower. 1 pc. 18’’ x 18’ , 1pc. 18’’ x 8’ , 90 degree elbow

118

Dust Pipe
(Part of an entirety) All pipe from equipment to blower. 2 pc. 22 degree elbows , 1 pc 18’’ x 11’6’’ pipe , 58’ pipe stepped down with 6’’ x 6’ drops to equipment

119

John Deere Power Unit
(1st of an entirety) SN: PE6068H732172, 6.8L 225 hp, 3000 hours since complete rebuild, with NACD clutch.

120

Lima Mac Generator
(Part of an entirety) Model: 440MDL0861, SN LC-0000148-1514, 60 KW, 208/240 V, 440 frame, with cut out box, no wires included.

121

GE Transformer
(Part of an entirety) 75.0 KVA, 60HZ, 3 ph., electrical conduit with 50' wire included

122

Air Compressor
(Part of an entirety) SN: 010117-111, belt drive with adjustable mount.

123

Electrical Conduit with Wire
50' wire and conduit

123

Line Shaft and Hydraulics
(Part of an entirety) 700 gallon hydraulic tank, hydraulic pumps, hydraulic valves, line shaft, hydraulic lines going to equipment.

123A

John Deere Power Unit and Hydraulic System Entirety of Lot 119 - 123
With 10% raise.

124

Master Tieback from Lots 100-123
With 10% raise. Buyer has the opportunity to buy complete precut line and lease the property for up to two years

124A

Wood-Mizer HR120 Resaw
MN: HR120G25, SN: 09091010, 25 hp, 2310 hours, Kohler Command Pro 25 gas engine, electric start, 12" x 6' feed belt, 1 1/4" bands, 7/8" x 19" wheels with v belts

124B

3 Electric Motors for Baker Resaw
MN: 1799A, 20 hp, 1765 rpm, 256 T frame, 3 ph, off of Baker resaw, 1 adjustable mount, cord, in good condition

125

Air Tank
9' x 3'

126

Fuel Tank
38" x 60" on skids

127

Fuel Tank
38" x 60" on skids

128

1 1/4" Bandsaw Blades
12 new blades

129

1 1/4" Bandsaw Blades
45 used blades

130

Self Dumping Hopper
1 cu. Yard hopper

131

Self Dumping Hopper
4' x 3' x 2'

132

Trash Hopper
6' x 5' x 4' hopper, with 7" x 3" fork pockets, heavy duty 3/8" metal

133

Scrap Rack
47" x 35" x 38"

134

Material Rack
15' long 40" at one end and 20" at other

135

Metal Shelf
10' long, 4' deep 6' tall

136

Swing Arm Cut Off Saw
Hydraulic drive 14" blade, 17' x 21" live in feed rolls hydraulic drive, 22" x 6' dead out feed rolls with material stops

137

Material Unscrambler
4 strand, 42" tall, 11' wide, hydraulic drive with air hydraulic control valve.

138

3 Strand In Feed Deck
9' x 9' hydraulic drive

139

Rip Saw
Set up for line shaft, 14" blade hydraulic drive feed rolls.

139A

Carbide Tip Blades 14"
1 1/2" arbor, 10 pc. Fresh sharpened

140

Accura Planer
Model: WJ28, SN 31211637, set up for line shaft.

141

Single Head Notcher
Manual loading with power feed, 9" wide head, set up for line shaft.

142

J.A. Fay Planer
Set up for line shaft.

143

Dado Cutter
Hydraulic drive, 1 1/2" wide blade.

144

Heavy Duty Drill Press
Model: 170F, hydraulic drive.

145

10" table saw
Model: TSC-10, SN: 47058, hydraulic drive.

146

Perkins Power Unit
2900 hours since complete rebuild, 4 cylinder diesel, with clutch.

147

Air Compressor
Belt drive, with adjustable mount

148

Line Shaft, Hydraulic Tank, and Hydraulic Pumps
3 hydraulic pumps

149

Air Tank
40" x 8'

150

Fuel Tank
67" x 3' with stand

151

36" Dust Blower
Hydraulic drive, with all pipes to and from blower

152

Storage Cabinet
32" wide x 6' tall x 24" deep

153

Material Rack
3' x 3' square 6' tall, 5 shelves

154

Material Racks
3' wide x 2' deep x 6' tall, 8' wide x 3' deep x 7' tall

155

Material Rack
4' wide x 3' deep x 6' tall

156

Material Rack
5' wide x 3' deep x 6' tall

157

Lumber Cart
3' wide x 6' long, two wheels swivel.

158

Board Stacking Rack
4' x 4' x 8' steel rack.

163

164

164A

Tire Chains for Loader

165

164B

Case W20C Wheel Loader*
2 lever boom control, no third valve, has heat/AC, pin on forks,sells with forks, runs and operates.

164C

Bucket for W20C*
Pin on dirt bucket.

165A

166

166A

Quick Attach Forks
4" x 42" forks, skid steer quick attach

167

Hawk Line 3 Point Drag Grader
8', 3 pt. mount

168

Bessemer Hit and Miss Engine
Pulley with clutch

169

Ford Power Unit
MN: 786091-G15-TB, SN: AHE-0290-2BB, 3.7L, diesel, clutch with pulley

169A

Case Power Unit 4 Cylinder Diesel
SN: M56 CBLCCFCDECFAMKFAAKR, motor reads 3017 hours, clutch, control panel, approx 75 HP. one owner unit that was well maintained and is production ready

170

4 Strand Transfer Deck
11' x 13', no drive

170A

2 Strand Transfer Deck
46" x 18', no chain, no sprockets, no drive

171

Dust Blower 36" Portable
13" inlet, 12" outlet, mounted on trailer, no power

172

Electric Motor and Gear Boxes
2 hp. Electric, 2 gear boxes

173

Deck Chain
All chain on pallet

174

Deck Chain 81X
All chain and sprocket on pallet

175

Sprockets and Pulley
Skid of parts, pulleys, sprockets, chain, connecting links

175A

Pulleys
Skid of used pulleys

176

Antique Chain Saws
Includes Stihl, Sears, Pioneer, Craftsman, McCulloch, Wright, Powerline, David Bradley, Condition unknown.

177

Hoffco Scythette Brush Cutter
SN: 9441, hand held brush cutter, 10" cutting bar, condition unknown.

178

Stacking Racks
1 pc. 4' x 4' x 4', 1 pc. 42" x 42" x 48", 1 pc. 36" x 48" x 38"

179

Stacking Shelves
36" x 36" x 8'

180

Pallet Racks
2 pc. 42" x 8' end frames, 6 pc. 8' cross members, 16 pc. 9' cross members, boards for shelfing

181

Slip on Dust Bucket
92" x 5" x 48", tie down chain

182

Wooden Scrap Box
6' x 42" x 42"

183

Deer Transport Box
4' x 44" x 36", 2 compartments, carry handles

184

Truck Box and Air Tanks
4' x 2' x 2' tool box, 2 pc. Vertical air tanks

185

Baker Control Boxes
Electrical breaker and fuse box with variable speed drive

186

Steel Lug Wheels
42" 6 hole steel wheels, 17-5L-24 Bolton tire, 13-6-28 bolt on tire

186A

Solid Rubber Wheels*
7" x 16" inside, 1 rim w/ tire 6.50 - 16. 3 pieces

187

Skid Steer Wheels with Solid Rubber Tires
30-10-16, 8 lugs

187A

Spartan Equipment Generator E9500
SN: GTB 6670, new unit, 20 and 30 amp outlets, portable

188

Lincoln Portable Welder
MN: AC 150, SN: A-952153, Kohler 10 hp gas engine.

189

Emglo Twin Tank Portable Air Compressor
10 hp Honda gas engine, engine not starting

190

Air Compressor on Tank
MN: 320, SN: 209605, Honda GX160 gas engine, vertical tank

191

Hawke Shop Press
60,000 lbs., no Jack

192

Slider Window
36" x 32" slider window

193

Work Bench Wood Top
7' x 30" workbench with vise, tool drawer. Contact Allen with any questions 330-600-0754

193A

Work Bench with drawers
6' x 24" x 35"

193B

Work Bench with drawers
6' x 24" x 35"

194

Hydraulic Tank, Rollers, and Deck Chain
24" x 16" x 12" hydraulic tank, 2 1/2" x 17 1/2" conveyor rolls, deck chain

195

Hydraulic Tank
18" x 18" x 16", valve and filter

196

V-Belts
New and used belts

197

New! Fuel Transfer Pump 12 V
New in box, includes wire and hose

197A

Gas Boy Fuel Pump
Manual pump with hose

198

Truck Hitch Adjustable
Fits 2" Reese hitch

199

Hydraulic Hose with Elbow Ends
3/4" hose, male pipe one end JIC elbow one end, assorted length, 11 pc.

199A

3" Coil Pallet Nails
11 boxes

199B

Sure Fit 3 1/2" Wire Coil Pallet Nails
12 1/2 boxes

199C

1" Coil Roofing Nails
1 box

199D

Pulley on Hook

200

Do-All Metal Cutting Bandsaw
Model: DBW, SN: 2462917C, 220V 1ph, variable speed, edging stone, oiler, light, 16" throat capacity, electric drive. Contact Allen with any questions 330-600-0754

201

Kalamazoo Metal Bandsaw
Model: P-46, SN: 10123, 9" x 16" capacity, electric drive, 1 new blade #16. Contact Allen with any questions 330-600-0754

202

Kondia Powermill Milling Machine
Model: FV-1, SN: 102-1, electric drive, extra tools, power feed table. Contact Allen with any questions 330-600-0754

203

Brown Sharper Horizontal Milling Machine
Electric drive, lots of extra tooling. Contact Allen with any questions 330-600-0754

204

SIP Jig Boring Machine
Model: MP-3K, SN: 304, extra tooling, electric drive. Contact Allen with any questions 330-600-0754

205

Covel Surface Grinder
Model: 35, SN: 35-140, 8" x 24" capacity, electric drive. Contact Allen with any questions 330-600-0754

206

Hamond Surface Grinder
Model: 2, SN: 1116-51, 6" x 18" capacity, electric drive, Brown + Sharp Magnetic chuck, extra tooling. Contact Allen with any questions 330-600-0754

207

LeBlond Regal Metal Lathe
13" x 30" capacity, with tooling, electric drive. Contact Allen with any questions 330-600-0754

207A

Layout Plates
15" x 20", 3 pc. Contact Allen with any questions 330-600-0754

207B

Machinist Vice
8 1/2"

208

Klopp Metal Mill
Electric drive. Contact Allen with any questions 330-600-0754

209

Floor Model Drill Press
Heavy duty, electric drive, 6" throat, 4" stroke. Contact Allen with any questions 330-600-0754

210

Index Machine Vertical Mill
Electric drive, powered table. Contact Allen with any questions 330-600-0754

211

Royal Double Drill Press
SN: 16-21204, 8" throat, 5" stroke, electric drive. Contact Allen with any questions 330-600-0754

212

South Bend Lathe
10" x 30 capacity, extra tooling. Contact Allen with any questions 330-600-0754

213

Majestic Grinder Mill
ID-OD grinder. Contact Allen with any questions 330-600-0754

214

Floor Model Drill Press
4" stroke, 7" throat, electric drive, variable speed. Contact Allen with any questions 330-600-0754

215

Sonnet Honing Machine
Electric drive, extra stones. Contact Allen with any questions 330-600-0754

216

Scripta Pantograph Copy Mill
Operators manual. Contact Allen with any questions 330-600-0754

217

K.O. Lee Tool Cutter
Model: A600, SN: 1498, electric drive. Contact Allen with any questions 330-600-0754

218

Niagara Metal Shear
Model: 42-F, SN: 48966, Mild steel capacity 42" -16 ga, guide. Contact Allen with any questions 330-600-0754

219

Stacking Racks
30" x 41" x 8", 10 pc.

220

Fairbanks Platform Scales
With parts. Contact Allen with any questions 330-600-0754

221

222

Hydraulic Pak
32" x 68" x 25" tanks, steel platform, 2 Baldor 30 hp. Electric motors with pumps, oil cooler radiator, wires to motors. Contact Allen with any questions 330-600-0754

223

Hydraulic Pak
4' x 5' x 2' tank on stand, 2 hydraulic pumps on mounts, air control valve, no power. Contact Allen with any questions 330-600-0754

224

Lumber Cart
28" x 90", tongue steer, solid rubber wheels. Contact Allen with any questions 330-600-0754

225

Bandsaw Blades and Parts
New 8 pc. 1 1/4" bandsaw blades for Wood-Mizer multi-head resaw, parts for Wood-Mizer resaw. Contact Allen with any questions 330-600-0754

226

Chains 5/16" with hooks
2 pc. 10", 1 pc. 7" Contact Allen with any questions 330-600-0754

227

Stihl MS 290 Chainsaw
20" bar, case. Contact Allen with any questions 330-600-0754

228

Ridge Metal Chopsaw 14"
Electric motor. Contact Allen with any questions 330-600-0754

229

230

231

232

Debarker Entirety of Lot 230-231
With 10% raise. Sold offsite. Location: 51584 TR 214B, Fresno, OH 43824

233

90-Degree Green Chain
Has poly chain, hydraulic drive, Made by Mill Innovation Designs

234

Frevert Lathe*
Hydraulic drive. Contact Allen with any questions 330-600-0754

235

Delta Rockwell Drill Press*
3 head drill press, air powered with foot pedal control. Contact Allen with any questions 330-600-0754

236

Craftsman Rip Table*
8" blade, belt drive, no drive motor. Contact Allen with any questions 330-600-0754

237

Hankison After Cooler*
SN: T49097, Model: ACH 300, Air cooled, 2 electric drive fans, 300 CFM. Contact Allen with any questions 330-600-0754

238

22" Squirrel Cage Blower*
SN: 21287, setup for belt drive. Contact Allen with any questions 330-600-0754

239

Trailer Axle with Wheels and Tires*
3' long leaf springs. Contact Allen with any questions 330-600-0754

240

Steel Crate*
60" w x 30" deep, 44" high. Contact Allen with any questions 330-600-0754

241

Banding Tools
10 pc. tighteners and crimpers

242

Control cables, Oil Filters , and Belts
Control cable for encoder to computer, all parts on skid.

243

Welding Helmets
2 pc.

244

Chain Binders, Hydraulic Motor, Gauges, Wheels
All parts on skid

245

4' x 4' Operating Cab

246

Tool Lot*
Hand tools, pipe fittings, air hose

247

Privacy Fence Boards
3/4" x 5" x 48" long, 60 pieces total.

Green Ridge Wood ProductsPrevious Page Listing ID#: 1509145

Free Email Notifications

Share This Listing

Other Sales byThis Company

Sponsored Links

Green Ridge Wood Products

Login

Sign Up

Sign Up

Login

Green Ridge Wood Products
Previous Page Listing ID#: 1509145

Other Sales by
This Company