Industrial Equipment/Tools/Office Furniture - Winchester VA
Previous Page Listing ID#: 1486943

Auction Location

Winchester, VA 22602
Auction Dates and TimesSALE IS COMPLETED
Bidding Starts: Saturday Feb 11
Bidding Ends: Monday Mar 13
Auction Type
 Online Auction  VIEW ONLINE CATALOG
Company Information
BidTender Auctions

Website: https://www.bidtenderauctions.com/

GoToAuction.com ID#: 10186
View company information and listings

Free Email Notifications

Sign up for the GoToAuction.com email notifications and we will let you know about sales in your area!  You may set up alerts by area (zip and radius), keywords, and by company.  It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions
BidTender Auctions, Inc., - Terms and Conditions The following terms and conditions apply to bidders, sellers, and participants in any auctions or events held, owned, or managed by BidTender Auctions, Inc., and/or assigns. It is your responsibility, prior to bidding, to ensure that you fully understand all terms and conditions defined herein. All Bidders and participants have complete and full knowledge of this agreement at registration for our auctions, and agree to be bound by these terms and conditions. * BidTender Auctions, Inc., shall herein/hereafter be referred to as BidTender Auctions, Auctioneer, and/or BTA, and these terms shall be interchangeable. * Bidder/Buyer/Purchaser will herein/hereafter collectively be referred to as Bidder. * Registering to bid with BidTender Auctions constitutes acknowledgement and acceptance of terms and conditions mentioned herein. These terms may be occasionally be updated, and continuance of participation and/or registration by Bidder constitutes full and future acceptance. * All lots are sold at auction, and are sold without warranty, expressed, or implied, and are sold as-is, where-is, along with any and all faults or discrepancies that may or may not be present. BTA, and/or the seller, makes no representation as to the safety, quality, condition, completeness, or operation of any items sold at auction. Although inspection/preview is not a requirement to bid, BTA encourages in-person preview/inspections on all items prior to bidding. * Bidder enters any auction site, property, or facility controlled or managed by BidTender Auctions, at his/her own risk, and agrees to hold harmless BTA for injury, accidents, and damages. * Due Diligence: BTA, and/or sellers/consignors strongly encourage all bidders to exercise due diligence prior to bidding on any items. This should include, but not be limited to, in-person inspections, hired technicians, and expert advice from a neutral party. Refunds are at the sole and absolute discretion of BTA. Preview inspections, when available, will be offered during a specified window of time, on a specified date(s). * Bidder acknowledges and accepts that errors may or may not be present in photographs, catalogs, descriptions, and any other information via written, spoken, or advertised. Bidder must communicate any errors or omissions to BTA, in writing or in person, prior to removal of purchased items. Bidder acknowledges that once an item has been removed from the auction site Bidder shall automatically assume full acceptance of items, complete with any and all faults, errors, or omissions. * BTA, as a convenience to the seller and the auction process, will try to have equipment and utilities disconnected, and purchased items ready for removal by the Bidder. But if BidTender Auctions does not have disconnections, removal, or any other convenience service(s) performed, for any reasons as deemed appropriate by BidTender Auctions, Bidder hereby acknowledges and reaffirms that it is the sole responsibility of the Bidder to safely disconnect and remove the their purchased items, without help or assistance from BTA, Seller, or the Consignor. Bidder also agrees to hold harmless BTA and/or the seller/consignor, of any liability, injury, or damages, and bidder hereby accepts sole responsibility for their own safety and the safety of anyone hired or with Bidder, when entering, while on, and when exiting the auction site. Bidder/buyer acknowledges and accepts the dangers inherent to auction sites, commercial equipment, and removing equipment, fall hazards, slipping or tripping hazards, utility connections, and any other potential or unpredictable hazards and/or harm not described herein. Bidder also agrees that at no time shall children or pets be permitted to enter the auction site (service animals are allowed). * BidTender Auctions, and/or assigns reserves the right to deny or revoke access to the auction site if Bidder behaves in a manner that BTA deems dangerous, inappropriate, or disruptive. Bidder also accepts all responsibility, financially and otherwise, for any damage or injury caused to the auction site, other people, building, equipment, vehicles, or any other property, due to actions, accident, or negligence by the Bidder and/or any parties hired by, representing, or helping Bidder. * If Bidder fails to remove any of their items by the end of the scheduled pickup date, BTA may, at their sole discretion, consider those items abandoned, and dispose of them in any manner BTA chooses. This may include, but is not limited to, selling at another auction or sale and BTA retaining any monies recovered, hauling away or storing for future disposal; and BTA reserves the right to charge bidder for reasonable disposal and/or storage fees. Should any items be abandoned by Bidder, Bidder shall lose all rights to said items, no refunds shall be issued to the Bidder, and any monies still due to Seller or BTA shall still be in force, immediately due, and payable to BTA. * When auction concludes, bidder agrees to have BTA charge their credit card on file for all items won, including fees, taxes, etc., as represented in the invoice which shall be emailed to Bidder at email address provided by Bidder during registration. Failure to receive invoice does not relieve Bidder of obligation to pay debt in full. Payment shall be completed within 24 hours of auction closing, unless prior agreement has been entered into and agreed upon, in writing, by BTA and the Bidder. Bidder also agrees not to initiate chargebacks against BidTender Auctions Inc., for any reason. * Bidder acknowledges that their bid is a legally binding contract with BTA, and Bidder agrees that BTA may use any legal means necessary for collecting or enforcing specific performance, which is defined in these terms and conditions. Collection costs, and legal costs incurred by BTA, shall also be borne by, and become the absolute responsibility of Bidder. * Bidder hereby agrees, that in the event of a dispute, where the parties involved are unable to come to a resolution, all further negotiations shall be handled , negotiated and settled through a third-party mutual arbitrator. Any and all fees, expenses, or costs of arbitration, for either party, shall be borne by, and become the sole and absolute responsibility of Bidder. * BTA reserves the right to have charge limits on any invoices, and require wire transfer, or certified bank check for any invoices over a certain threshold, or for any reason whatsoever as determined by BTA. Bidder agrees that all sales are final. Credit cards will not be accepted as payment for any items requiring shipping, and Bidder acknowledges that wire transfers are the only method of payment accepted for shipping. * Should Bidder default on full payment of invoice by the date due, BTA may seek any and actions allowed by law, and BTA may retain any and all monies and/or consideration, received as a deposit or otherwise, as a form of liquidated damages. Any of the Bidder's items that are not paid for and/or removed within the specified and advertised times, may be disposed of, or resold at public or private sale or auction, without further notice, and any deficiency, fiscal or otherwise, together with all expenses and of re-sale costs, will become the debt of, and be charged to the defaulting Bidder. * All fluids, oils, coolants, chemicals, fuels, gases, if required by federal, state, or local laws, ordinances, or shipping requirements, must be removed prior to removal and/or shipment. Bidder acknowledges and accepts this responsibility, and holds harmless BTA, Seller, Consignor, and any other entities affiliated with BTA from any and all claims or future claims for damages, injury, proximal consequence, environmental impact, or any other liabilities. * Shipping: BTA will offer shipping via USPS, UPS, FedEx, Freight, and/or other manner, as determined by BTA, solely at cost to the Bidder. Bidder should contact BTA immediately following auction closing if shipping arrangements are requested by Bidder. Under no circumstances will BTA ship Bidder's items until all invoices are paid and settled via wire transfer, including shipping costs. Additional, reasonable fees for shipping-related services may be applicable. These additional fees can be, but are not limited to a fifty-dollar ($50.00) palletization fee, a fifteen-dollar ($15.00) packing/boxing/labeling fee, a transport fee for transport of Bidder items to a shipping facility, liftgate fees, and postage or other shipment charges/expenses/costs/fees that may be charged to BTA by FedEx, UPS, USPS, etc. BTA is unable to estimate shipping expenses without knowing destination, exact items to be shipped, and exact weight after palletiziation and/or packaging. Therefore BTA recommends Bidder use the approximated dimensions of item provided by BTA in the lot descriptions, along with visiting the manufacturers website for weights as specified on their Spec Sheet, data sheet, or manuals, then cross referencing that data with a shipping company or freight company cost estimate tool. For Bidder convenience, BTA has commercial accounts set up with companies such as XPO Logistics, and Old Dominion Freight, and can provide shipping through them for a lower cost than is typically available to the public. * BTA reserves the right to deny access, exclude, or refuse service to any individual, or parties, for any reason whatsoever, without explanation, provided such refusal is legal and does not violate federal, state, or local law(s). * Any dollies, pallet jacks, pallets, or other items shown in the lot pictures, other than the lot in the description, are not included in the sale, and are only in the pictures as needed to better facilitate safely moving the lot around for photography. * If any item Bidder purchases is, for any reason, not available, or missing, any liability of BTA shall be limited to a refund of the purchase price of that item. * A buyer's premium of fifteen percent (15%), charged by BTA, shall be added to the total of all invoices, and is payable to BTA. BTA will offer a 3% discount for cash payments, which may be made at auction pick up, however Bidder must bring payment in exact amount specified on invoice, as change may not be available. * Sales Tax: Sales tax will be charged after all bids, fees, premiums, and totals have been calculated, then added to the Bidder's invoice, applicable to the rates and laws of the state and/or jurisdictions the auction(s) are/were held in. If you are legally exempt from sales tax, you must submit the proper documentation and credentials to BTA. As of the date these terms and conditions were drafted, the sales tax rate for Fairfax County Virginia is/was (6%), Maryland (6%), and DC (6%); however additional local and/or jurisdictional taxes may apply. * Currency type for all transactions and debts with BTA shall be in the form of USD (United States Dollar). Auction Location: 250 Independence Dr WInchester, VA 22602
Listing Information
Recently closed manufacturing facility in Winchester, VA is liquidating industrial machinery, tools, pallet racks & shelving, air handling units, paint booths, HAZMAT management enclosure skid, urethane mold ovens, lathes, vertical milling machines, Herman Miller office partitions, cubicles, desks, lateral file cabinets, and so much more! 3-days for removal, including a Saturday! Forklifts onsite to assist. Shipping not available for this auction, all items must be picked up in person except as otherwise noted in individual lots. In Person Preview is Saturday, March 11th from 12-3pm. You may pick up your items on the scheduled pick up days at: 250 Independence Dr Winchester, VA 22602 Pick Up Dates/Times are as Follows: Thursday March 16th from 10am-4pm Friday March 17th from 10am-4pm Saturday March 18th from 10am-4pm All equipment will be professionally disconnected by seller, and ready for you to pick up on scheduled pick up days. Office furnishings/cubicles/partitions, and Herman Miller furniture will need to be disassembled by winning bidders. This auction is packed with well maintained industrial machinery, lathes, vertical milling machines, air/exhaust/fume handling & dust removal units, hazmat management equipment, steel I-beam mezzanines, Herman Miller office equipment and furnishings, and so much more. Bidding is now open and starts closing at 8pm on Monday, March 13th. All equipment is fully functional and was still in use until the end of this month. The company is still in operation, and has been in Winchester for over 35 years. They're consolidating facilities and will continue operations at their other locations. It's a great opportunity to upgrade your current equipment, or increase your current capability and output. Forklifts will be onsite to assist. Easy access to the building for Tractor Trailers and large trucks, and conveniently located within a few miles of Interstate 81. Facility is equipped with a full size loading dock, and also a ground level loading dock. Address is: MPC Creative Urethanes LLC 250 Independence Dr Winchester, VA 22602 All items must be removed by 4pm on Saturday March 18th, or items will be considered abandoned, disposed of, and no refunds will be given. Additional charges for removal & disposal will apply if items are not picked up by deadline. New tenant will be taking over facility, so we cannot extend the pick up deadline. If you cannot pick up by the end of the scheduled pick up days, please do not bid.

1
Steel Mezzanine 16 x 18ft - already disassembled
Steel Mezanine with staircase Approximately 16ft wide, and 18ft deep. Clearance underneath is 8ft Height to top of floor is 9ft 4 inches (not including safety hand rails) The mezzanine will be disassembled by the seller and ready for pick up by winn...

2
Steel Mezzanine 33 x 24ft - already disassembled
Steel mezzanine without staircase. Does not include the small overhead hoist crane mounted underneath (that is a separate lot) Approximately 33ft wide, and 24ft deep. Clearance underneath is 9.5ft Height to top of floor is 10ft not including safety h...

3
(2) Air Handling Units
(2) Airflow Systems air handling units. Model 2400 VOM Disconnected and ready for easy pick up by winning bidder You get both units for one price. Forklift onsite to assist

3
Hazmat Storage Container on Skid - self contained
Hazmat Storage Container built-in skid - self contained Dimensions are 116 inches wide, 82 deep, and 90 tall. Forklift onsite to assist in loading

4
Gantry Crane - Overhead Hoist
Overhead Hoist Gantry Crane Bidder responsible for removal - it is not anchored to the floor

4
Warehouse Enclosure - Office, etc
Winning bidder responsible for disassembly and removal. Forklift onsite to help load. Self contained warehouse enclosure for offices, or particulate containment. Currently used for sandblasting and paint booth. Enclosure only, paint booth or sandblas...

5
Hazmat Storage Container on Skid - self contained
Hazmat Storage Container built-in skid - self contained Forklift onsite to assist in loading

5
Lathe - Jet GH 1840ZX
Jet GH 1840ZX lathe with tooling 93 inches wide, 24 deep, and 53 tall Will be disconnected by seller for easy pick up by winning bidder Forklift onsite to assist.

6
Lathe - Jet GH 1840ZX
Jet GH 1840ZX lathe with tooling Will be disconnected by seller for easy pick up by winning bidder Forklift onsite to assist.

5
Lathe - Delta 14
Rockwell Delta 14 Lathe 23 inches deep, 87 wide, and 51 tall Will be disconnected by seller for easy pick up by winning bidder Forklift onsite to assist

7
Lathe Jet TL25
Jet TL25 lathe Will be disconnected by seller for easy pick up by winning bidder Forklift onsite to assist

5
Lathe - Omniturn Hardinge with Controller
Lathe - Omniturn Hardinge with controls Will be disconnected by seller for easy pick up by winning bidder Forklift onsite to assist

8
Lathe - Delta 14
Rockwell Delta 14 Lathe Will be disconnected by seller for easy pick up by winning bidder Forklift onsite to assist

5
Lathe Jet TL25
Jet TL25 lathe Will be disconnected by seller for easy pick up by winning bidder Forklift onsite to assist

9
Lathe - Omniturn Hardinge with Controller
Lathe - Omniturn Hardinge with controls Will be disconnected by seller for easy pick up by winning bidder Forklift onsite to assist

5
Lathe Tooling, Collets, etc - Large Lot
Tooling and collets for lathes. Known to fit the Jet GH1840ZX Lathe, and also fits the SuperMax vertical milling machine. Since these can work with both machines, they are being auctioned as a seperate lot. All for one price

10
Lathe Tooling, Collets, etc - Large Lot
Tooling and collets for lathes. Known to fit the Jet GH1840ZX Lathe, and also fits the SuperMax vertical milling machine. Since these can work with both machines, they are being auctioned as a seperate lot. All for one price

5
Lathe Leveler and Micrometers
Lathe leveler, micrometers, etc

11
Lathe Leveler and Micrometers
Lathe leveler, micrometers, etc

5
Decimal Equivalents Chart
Plastic decimal equivalents chart $1 bill is for scale and is not included

12
Warehouse Enclosure - Sand Blasting, Office, etc
Self contained warehouse enclosure for offices, or particulate containment. Currently used for sandblasting Dimensions are 8ft 4 inches wide, 10ft 4 inches deep, and 7ft 3 inches tall This is for the booth only, equipment inside are listed as seper...

6
Gantry Crane - Overhead w/ 1000 lb Hoist
Overhead Hoist Gantry Crane with 1000 lb hoist 20ft wide, and 10.5 feet tall Bidder responsible for removal - it is not anchored to the floor, so removal should be fairly simple after unbolting and lowering the overhead beam. We do have a forklift o...

6
Overhead Crane - w/ 500lb hoist (under mezzanine)
Overhead crane - hoist - 500lbs - with track (unit is currently mounted under large mezzanine - will be removed/uninstalled by seller for easy pick up.

13
Sandblaster Cabinet - Zero Blast n Peen
Zero Blast 'n Peen sandblaster & cabinet Forklift onsite to assist

6
Hoist - 500 lb - Brand = CM
CM brand chain Chain hoist - 500 lbs

6
Hoist - 500 lb - Brand = CM
CM brand chain Chain hoist - 500 lbs

14
Sandblaster - Portable, on cart
Lindsay Portable sandblaster on cart

6
Hoist Winch - Northern Industrial
Northern industrial hoist - winch - no other items in pictures are included

6
Hoist Winch - Northern Industrial
Northern industrial hoist - winch - no other items in pictures are included

15
Vertical Milling Machine - Supermax
Supermax vertical milling machine Will be disconnected by seller for easy pick up by winning bidder. Forklift onsite to assist

7
Vertical Milling Machine - Supermax
Supermax vertical milling machine Will be disconnected by seller for easy pick up by winning bidder. Forklift onsite to assist

16
Bandsaw - Vertical
Vertical Bandsaw with extra blades. Disconnected by seller for easy pick up by winning bidder Forklift onsite to assist

8
Bandsaw - Vertical
Vertical Bandsaw with extra blades. Disconnected by seller for easy pick up by winning bidder Forklift onsite to assist

9
Paint Booth - Updraft Ventilation Booth
Updraft ventilation booth for painting, includes spray equipment in pictures. Air handling units not included Approximately 8ft 4 inches wide, 10ft 4 inches deep, and 7ft 2 tall. Rigging services and/or labor will be required to remove from the buil...

9
Paint Booth - Ventilated - for airbrush, etc
Paint booth only. Air handling system is in a different lot Rigging services and/or labor will be required to remove from the building and this is not included. It is up to the winning bidder to provide labor for this. However we will have forklift...

10
Robot Trim Enclosure w/ Fanuc Robot - SEE UPDATE!
UPDATE: For this lot, and this lot only, more time can be given for pickup/removal, including the following week after the auction (but this must be scheduled with us, and complete removal must be finished by noon on Friday March 24th. However, all p...

11
Hydraulic Press 35 Ton - Packard
35 ton hydraulic press Forklift onsite to assist

12
Hydraulic Press
Hydraulic press Forklift onsite to assist

22
Paint Booth - Updraft Ventilation Booth
Updraft ventilation booth for painting, includes spray equipment in pictures. Air handling units not included

13
Sandblaster Cabinet - Zero Blast n Peen
Zero Blast 'n Peen sandblaster & cabinet Forklift onsite to assist

23
Hydraulic Press 35 Ton - Packard
35 ton hydraulic press Forklift onsite to assist

13
Sandblaster - Portable, on cart
Lindsay Portable sandblaster on cart

24
Compressed Air Back Up Tank
Back up air tank for compressed air system Disconnected for easy pick up

14
JESCO Self Dumping Hopper - Dumpster - larger
Jesco 2.5 Yard Self Dumping Hopper Dumpster, model 211761. 2000 pound capacity. Dimensions are 60 inches wide, 64 deep, and 51 tall.

25
Hoist - 500 lb
Chain hoist - 500 lbs

14
JESCO Self Dumping Hopper - Dumpster - smaller
Jesco self dumping hopper dumpster. We cannot read the data tag or model number, so the volume and weight capacity are not know. It is appears about 15% smaller than the other unit for auction. The dimensions are: 57 inches wide, 61 deep, and 37 ta...

26
Hydraulic Press
Hydraulic press Forklift onsite to assist

17
Pallet Rack #1 - located near the far corner
Pallet rack - located near the far corner of the building, next to but not including the L-shaped pallet racks Buyer responsible for disassembly

18
Pallet Racks #2 (3 section L-shape) far corner
Pallet racks - L-shape unit - located near the far corner of building Buyer responsible for disassembly

19
Pallet Racks #3 (2 section) includes IBC Tote
Pallet Racks - 2 sections - Includes IBC Tote seen in pictures on rack. Located near garage bay door and fire exit Buyer responsible for disassembly

20
Pallet Racks #4 (2 section)
Pallet racks Buyer responsible for disassembly

21
Pallet Stacker Forklift - Straddle Stacker
Pallet Stradde Stacker forklift Needs battery - unit works Forklift onsite to assist in loading

27
Mixer - ProMix Plural Component Proportioner
ProMix Easy Plural Component Proportioner Mixer Forklift onsite to assist

28
Mixers (2) Bracket Mount Mixers
This lot contains (2) INDCO bracket mount mixers, and an additonal mixer head. Configured to mount ontop of an IBC tote frame to mix the contents of tote.

29
Mixer - Handheld
Hand held mixing unit

30
Motors - Electric - 2 Pallets
2 Pallets of various electric motors and power switches. See pictures for data plates & info

31
Pad Printer 6-color Kent PP2000e
Pad Printer PP2000e 6 Color Forklift onsite to assist

32
Oven - Electric - Large - for Urethane Molds
Oven - Urethane molds. On wheels (heavy duty needle bearing warehouse cart) electric

33
Oven - Electric - Urethane Molds #2
Electric oven for urethane molds

38
Robot Trim Enclosure w/ Fanuc Robot, & Air Handler
Robot Trim Enclosure with Fanuc Robot and air hanlder filtration & dust/particulate control Comes with controller, manuals, & software Buyer responsible for disassembly Forklift onsite to assist

34
Oven - Electric - Urethane Molds #3
Electric oven for urethane molds

35
Oven - electric - tabletop - for urethane molds #4
Tabletop Electric oven for urethane molds

36
Chiller - Maximum MK Series Portable Chiller
Maximum MK Series portable chiller Forklift onsite to assist

37
Plural Component Proportioner - Reactor E-XP2
This lot consists of (2) Reactor E-XP2 plural component proportioners. Both units for one price. Forklift onsite to assist

39
Sprayer Carts with sprayers - paint
This lot consists of (3) sprayer carts & sprayers All 3 units for one price

40
Scale - Pallet Scale - grey - #1
Pallet scale Forklift onsite to assist

41
Scale - Pallet Scale - blue - #2
Pallet Scale Forklift onsite to assist

45
Welding Cart with Victory gauges, lines, torch
Welding cart with Victory gauges, lines, torch, & brand new in box welding helmet.


43
Scales - Balance Scales - misc lot
Misc Lot of tabletop balance scales

46
Welding Table with tons of welding clamps
Welding table with tons of welding clamps All for one price

44
Stairs - Rolling Warehouse Stocking Staircase
Rollng warehouse stock staircase

47
Welding Table - with removable urethane insulated
Welding table with removable urethane insulated cover

45
Welding Cart with Victory gauges, lines, torch
Welding cart with Victory gauges, lines, torch, & brand new in box welding helmet.

45
Welding Table with tons of clamps, tools & grinder
Welding table with tapped/threaded jig holes, and tons of welding clamps, tooling, and angle grinder All for one price

45
Welding Table - with removable urethane insulated
Welding table with removable urethane insulated cover

45
Welding Table - Metal Top with Heavy Vise
Metal top work table with heavy duty Wilson 4500 vise. Contents of table not included, this auction lot is for just the table and the vise.

48
Transformer - Universal #1 (large)
Universal Transformer Forklift onsite to assist

49
Transformer - Universal #2
Universal Transformer Forklift onsite to assist

50
Workbench Worktable - Heated Top (very thick) #2
Heated top metal worktable with a very thick metal top (see dollar bill in pictures for scale). This is for the table only, contents and items on top are not included. Forklift onsite to assist

54
Fluid Transfer Cart w/ 50 Gallon Drum
All mounted on pallet jack for easy use. Fluid transfer cart

51
Workbench Worktable Heated Top - #1
Heated top metal worktable - this is the heated worktable with the thinner top than the other one. This is for the table only, contents and items on top are not included Forklift onsite to assist

52
Flammables Storage Cabinet #1
Storage cabinet for flammables


53
Flammables Storage Cabinet #2
Storage cabinet for flammables

54
Flammables Storage Cabinet (sandblast area)
Steel cabinet for flammables storage








66
Paint Booth - Ventilated - for airbrush, etc
Paint booth only. Air handling system is in a different lot

63
Steel Bolts Organizer with nuts, bolts, fasteners
Very large lot of nuts, bolts, fasteners, organizer All for one money.


64
Shelving - Steel - Large Lot
Large lot of steel shelving - winning bidder must take all. See video. All for one price Must take all.

65
(13) Large U-Shape Stock Warehouse Carts -
(13) large u-shape warehouse stock carts All for 1 money

67
(2) Air Handling Units
(2) Airflow Systems air handling units. Each unit is approximately 12.5 feet tall, 55 inches wide, and 48 inches deep. Model 2400 VOM. They are disconnected and ready for pick up by winning bidder. Rigging services, labor, and equipment will be neede...

68
Wall Lockers - easy removal
Room full of steel wall lockers- Units have been unfastened from wall/floor and are located next to exit door for super easy removal. Includes an additional wall locker unit located in the tool room All for one price



71
Grease Guns - All for one money
Grease Guns All for one price

72
Etching Print Maker
Print Maker (light etching) with spare bulbs, etc

73
Drill Press - Rockwell Delta 15
Rockwell Delta 15 Drill Press


75
Drill Press w/ parts
Unknown working condition

76
Drill Bit Lot
Table full of misc drill bits


77
Toolbox - FULL OF TOOLS!!! - on wheels -Steel
Black steel Craftsman tool box with tools, and red steel toolbox next to it... All for one price

79
Dollies for Steel Drums - Large Lot
Large lot of dollies for 50 gallon steel drums All for one price

78
Tool Box - Rolling - FULL OF TOOLS! (poly)
Rolling Craftsman Plastic-Poly Toolbox FULL OF TOOLS! Toolbox and contents only, nothing else in pictures are included. All for one price

81
Air Cleaner -MFG Industrial (near sandblast booth)
MFG industrial Air Cleaner Forklift onsite to assist

81
(2) Hydraulic Pumps & Motors - powers 4 units
A set of 2 matching industrial sized hydraulic pumps with twin motors on each unit. Each unit can power 2 large machines, and holds approximately 100 gallons of hydraulic fluid. Were used to power the 2 Fanuc robots you see in the pictures (Robots ar...



80
Air - dust - Filtration - Steel Drum Mounted
Steel Drum mounted particulate air filters (2) Both for one price

81
Refrigerator - Hallway
Dimensions are 66.25 inches tall, 29.75 wide, and 32 deep

83
Shop Lights - Portable - Lot of 3
Lot of 3 portable shop lights All 3 for one price

84
Fans - Portable Shop Fans - Lot of 9
Lot of 9 warehouse shop fans All for one price




91
Cabinet - Steel Parts Cabinet -Empty - #2
Cabinet is empty, and locked - no key


Auction License: 2907004786
Photo Gallery

Save Listing As Favorite

Print Listing information

Share This Listing

  • Facebook
  • Email this Listing to a Friend






Other Sales by
This Company

Nov 25
Chantilly, VA



Sponsored Links

Industrial Equipment/Tools/Office Furniture - Winchester VA

BidTender Auctions

BidTender Auctions


Contact:
Phone:
Sale Location
250 Independence Dr
Winchester, VA 22602
Sale Dates and Times
Sale Terms and Conditions
BidTender Auctions, Inc., - Terms and Conditions The following terms and conditions apply to bidders, sellers, and participants in any auctions or events held, owned, or managed by BidTender Auctions, Inc., and/or assigns. It is your responsibility, prior to bidding, to ensure that you fully understand all terms and conditions defined herein. All Bidders and participants have complete and full knowledge of this agreement at registration for our auctions, and agree to be bound by these terms and conditions. * BidTender Auctions, Inc., shall herein/hereafter be referred to as BidTender Auctions, Auctioneer, and/or BTA, and these terms shall be interchangeable. * Bidder/Buyer/Purchaser will herein/hereafter collectively be referred to as Bidder. * Registering to bid with BidTender Auctions constitutes acknowledgement and acceptance of terms and conditions mentioned herein. These terms may be occasionally be updated, and continuance of participation and/or registration by Bidder constitutes full and future acceptance. * All lots are sold at auction, and are sold without warranty, expressed, or implied, and are sold as-is, where-is, along with any and all faults or discrepancies that may or may not be present. BTA, and/or the seller, makes no representation as to the safety, quality, condition, completeness, or operation of any items sold at auction. Although inspection/preview is not a requirement to bid, BTA encourages in-person preview/inspections on all items prior to bidding. * Bidder enters any auction site, property, or facility controlled or managed by BidTender Auctions, at his/her own risk, and agrees to hold harmless BTA for injury, accidents, and damages. * Due Diligence: BTA, and/or sellers/consignors strongly encourage all bidders to exercise due diligence prior to bidding on any items. This should include, but not be limited to, in-person inspections, hired technicians, and expert advice from a neutral party. Refunds are at the sole and absolute discretion of BTA. Preview inspections, when available, will be offered during a specified window of time, on a specified date(s). * Bidder acknowledges and accepts that errors may or may not be present in photographs, catalogs, descriptions, and any other information via written, spoken, or advertised. Bidder must communicate any errors or omissions to BTA, in writing or in person, prior to removal of purchased items. Bidder acknowledges that once an item has been removed from the auction site Bidder shall automatically assume full acceptance of items, complete with any and all faults, errors, or omissions. * BTA, as a convenience to the seller and the auction process, will try to have equipment and utilities disconnected, and purchased items ready for removal by the Bidder. But if BidTender Auctions does not have disconnections, removal, or any other convenience service(s) performed, for any reasons as deemed appropriate by BidTender Auctions, Bidder hereby acknowledges and reaffirms that it is the sole responsibility of the Bidder to safely disconnect and remove the their purchased items, without help or assistance from BTA, Seller, or the Consignor. Bidder also agrees to hold harmless BTA and/or the seller/consignor, of any liability, injury, or damages, and bidder hereby accepts sole responsibility for their own safety and the safety of anyone hired or with Bidder, when entering, while on, and when exiting the auction site. Bidder/buyer acknowledges and accepts the dangers inherent to auction sites, commercial equipment, and removing equipment, fall hazards, slipping or tripping hazards, utility connections, and any other potential or unpredictable hazards and/or harm not described herein. Bidder also agrees that at no time shall children or pets be permitted to enter the auction site (service animals are allowed). * BidTender Auctions, and/or assigns reserves the right to deny or revoke access to the auction site if Bidder behaves in a manner that BTA deems dangerous, inappropriate, or disruptive. Bidder also accepts all responsibility, financially and otherwise, for any damage or injury caused to the auction site, other people, building, equipment, vehicles, or any other property, due to actions, accident, or negligence by the Bidder and/or any parties hired by, representing, or helping Bidder. * If Bidder fails to remove any of their items by the end of the scheduled pickup date, BTA may, at their sole discretion, consider those items abandoned, and dispose of them in any manner BTA chooses. This may include, but is not limited to, selling at another auction or sale and BTA retaining any monies recovered, hauling away or storing for future disposal; and BTA reserves the right to charge bidder for reasonable disposal and/or storage fees. Should any items be abandoned by Bidder, Bidder shall lose all rights to said items, no refunds shall be issued to the Bidder, and any monies still due to Seller or BTA shall still be in force, immediately due, and payable to BTA. * When auction concludes, bidder agrees to have BTA charge their credit card on file for all items won, including fees, taxes, etc., as represented in the invoice which shall be emailed to Bidder at email address provided by Bidder during registration. Failure to receive invoice does not relieve Bidder of obligation to pay debt in full. Payment shall be completed within 24 hours of auction closing, unless prior agreement has been entered into and agreed upon, in writing, by BTA and the Bidder. Bidder also agrees not to initiate chargebacks against BidTender Auctions Inc., for any reason. * Bidder acknowledges that their bid is a legally binding contract with BTA, and Bidder agrees that BTA may use any legal means necessary for collecting or enforcing specific performance, which is defined in these terms and conditions. Collection costs, and legal costs incurred by BTA, shall also be borne by, and become the absolute responsibility of Bidder. * Bidder hereby agrees, that in the event of a dispute, where the parties involved are unable to come to a resolution, all further negotiations shall be handled , negotiated and settled through a third-party mutual arbitrator. Any and all fees, expenses, or costs of arbitration, for either party, shall be borne by, and become the sole and absolute responsibility of Bidder. * BTA reserves the right to have charge limits on any invoices, and require wire transfer, or certified bank check for any invoices over a certain threshold, or for any reason whatsoever as determined by BTA. Bidder agrees that all sales are final. Credit cards will not be accepted as payment for any items requiring shipping, and Bidder acknowledges that wire transfers are the only method of payment accepted for shipping. * Should Bidder default on full payment of invoice by the date due, BTA may seek any and actions allowed by law, and BTA may retain any and all monies and/or consideration, received as a deposit or otherwise, as a form of liquidated damages. Any of the Bidder's items that are not paid for and/or removed within the specified and advertised times, may be disposed of, or resold at public or private sale or auction, without further notice, and any deficiency, fiscal or otherwise, together with all expenses and of re-sale costs, will become the debt of, and be charged to the defaulting Bidder. * All fluids, oils, coolants, chemicals, fuels, gases, if required by federal, state, or local laws, ordinances, or shipping requirements, must be removed prior to removal and/or shipment. Bidder acknowledges and accepts this responsibility, and holds harmless BTA, Seller, Consignor, and any other entities affiliated with BTA from any and all claims or future claims for damages, injury, proximal consequence, environmental impact, or any other liabilities. * Shipping: BTA will offer shipping via USPS, UPS, FedEx, Freight, and/or other manner, as determined by BTA, solely at cost to the Bidder. Bidder should contact BTA immediately following auction closing if shipping arrangements are requested by Bidder. Under no circumstances will BTA ship Bidder's items until all invoices are paid and settled via wire transfer, including shipping costs. Additional, reasonable fees for shipping-related services may be applicable. These additional fees can be, but are not limited to a fifty-dollar ($50.00) palletization fee, a fifteen-dollar ($15.00) packing/boxing/labeling fee, a transport fee for transport of Bidder items to a shipping facility, liftgate fees, and postage or other shipment charges/expenses/costs/fees that may be charged to BTA by FedEx, UPS, USPS, etc. BTA is unable to estimate shipping expenses without knowing destination, exact items to be shipped, and exact weight after palletiziation and/or packaging. Therefore BTA recommends Bidder use the approximated dimensions of item provided by BTA in the lot descriptions, along with visiting the manufacturers website for weights as specified on their Spec Sheet, data sheet, or manuals, then cross referencing that data with a shipping company or freight company cost estimate tool. For Bidder convenience, BTA has commercial accounts set up with companies such as XPO Logistics, and Old Dominion Freight, and can provide shipping through them for a lower cost than is typically available to the public. * BTA reserves the right to deny access, exclude, or refuse service to any individual, or parties, for any reason whatsoever, without explanation, provided such refusal is legal and does not violate federal, state, or local law(s). * Any dollies, pallet jacks, pallets, or other items shown in the lot pictures, other than the lot in the description, are not included in the sale, and are only in the pictures as needed to better facilitate safely moving the lot around for photography. * If any item Bidder purchases is, for any reason, not available, or missing, any liability of BTA shall be limited to a refund of the purchase price of that item. * A buyer's premium of fifteen percent (15%), charged by BTA, shall be added to the total of all invoices, and is payable to BTA. BTA will offer a 3% discount for cash payments, which may be made at auction pick up, however Bidder must bring payment in exact amount specified on invoice, as change may not be available. * Sales Tax: Sales tax will be charged after all bids, fees, premiums, and totals have been calculated, then added to the Bidder's invoice, applicable to the rates and laws of the state and/or jurisdictions the auction(s) are/were held in. If you are legally exempt from sales tax, you must submit the proper documentation and credentials to BTA. As of the date these terms and conditions were drafted, the sales tax rate for Fairfax County Virginia is/was (6%), Maryland (6%), and DC (6%); however additional local and/or jurisdictional taxes may apply. * Currency type for all transactions and debts with BTA shall be in the form of USD (United States Dollar). Auction Location: 250 Independence Dr WInchester, VA 22602
Listing Details
Recently closed manufacturing facility in Winchester, VA is liquidating industrial machinery, tools, pallet racks & shelving, air handling units, paint booths, HAZMAT management enclosure skid, urethane mold ovens, lathes, vertical milling machines, Herman Miller office partitions, cubicles, desks, lateral file cabinets, and so much more! 3-days for removal, including a Saturday! Forklifts onsite to assist. Shipping not available for this auction, all items must be picked up in person except as otherwise noted in individual lots. In Person Preview is Saturday, March 11th from 12-3pm. You may pick up your items on the scheduled pick up days at: 250 Independence Dr Winchester, VA 22602 Pick Up Dates/Times are as Follows: Thursday March 16th from 10am-4pm Friday March 17th from 10am-4pm Saturday March 18th from 10am-4pm All equipment will be professionally disconnected by seller, and ready for you to pick up on scheduled pick up days. Office furnishings/cubicles/partitions, and Herman Miller furniture will need to be disassembled by winning bidders. This auction is packed with well maintained industrial machinery, lathes, vertical milling machines, air/exhaust/fume handling & dust removal units, hazmat management equipment, steel I-beam mezzanines, Herman Miller office equipment and furnishings, and so much more. Bidding is now open and starts closing at 8pm on Monday, March 13th. All equipment is fully functional and was still in use until the end of this month. The company is still in operation, and has been in Winchester for over 35 years. They're consolidating facilities and will continue operations at their other locations. It's a great opportunity to upgrade your current equipment, or increase your current capability and output. Forklifts will be onsite to assist. Easy access to the building for Tractor Trailers and large trucks, and conveniently located within a few miles of Interstate 81. Facility is equipped with a full size loading dock, and also a ground level loading dock. Address is: MPC Creative Urethanes LLC 250 Independence Dr Winchester, VA 22602 All items must be removed by 4pm on Saturday March 18th, or items will be considered abandoned, disposed of, and no refunds will be given. Additional charges for removal & disposal will apply if items are not picked up by deadline. New tenant will be taking over facility, so we cannot extend the pick up deadline. If you cannot pick up by the end of the scheduled pick up days, please do not bid.

1
Steel Mezzanine 16 x 18ft - already disassembled
Steel Mezanine with staircase Approximately 16ft wide, and 18ft deep. Clearance underneath is 8ft Height to top of floor is 9ft 4 inches (not including safety hand rails) The mezzanine will be disassembled by the seller and ready for pick up by winn...

2
Steel Mezzanine 33 x 24ft - already disassembled
Steel mezzanine without staircase. Does not include the small overhead hoist crane mounted underneath (that is a separate lot) Approximately 33ft wide, and 24ft deep. Clearance underneath is 9.5ft Height to top of floor is 10ft not including safety h...

3
(2) Air Handling Units
(2) Airflow Systems air handling units. Model 2400 VOM Disconnected and ready for easy pick up by winning bidder You get both units for one price. Forklift onsite to assist

3
Hazmat Storage Container on Skid - self contained
Hazmat Storage Container built-in skid - self contained Dimensions are 116 inches wide, 82 deep, and 90 tall. Forklift onsite to assist in loading

4
Gantry Crane - Overhead Hoist
Overhead Hoist Gantry Crane Bidder responsible for removal - it is not anchored to the floor

4
Warehouse Enclosure - Office, etc
Winning bidder responsible for disassembly and removal. Forklift onsite to help load. Self contained warehouse enclosure for offices, or particulate containment. Currently used for sandblasting and paint booth. Enclosure only, paint booth or sandblas...

5
Hazmat Storage Container on Skid - self contained
Hazmat Storage Container built-in skid - self contained Forklift onsite to assist in loading

5
Lathe - Jet GH 1840ZX
Jet GH 1840ZX lathe with tooling 93 inches wide, 24 deep, and 53 tall Will be disconnected by seller for easy pick up by winning bidder Forklift onsite to assist.

6
Lathe - Jet GH 1840ZX
Jet GH 1840ZX lathe with tooling Will be disconnected by seller for easy pick up by winning bidder Forklift onsite to assist.

5
Lathe - Delta 14
Rockwell Delta 14 Lathe 23 inches deep, 87 wide, and 51 tall Will be disconnected by seller for easy pick up by winning bidder Forklift onsite to assist

7
Lathe Jet TL25
Jet TL25 lathe Will be disconnected by seller for easy pick up by winning bidder Forklift onsite to assist

5
Lathe - Omniturn Hardinge with Controller
Lathe - Omniturn Hardinge with controls Will be disconnected by seller for easy pick up by winning bidder Forklift onsite to assist

8
Lathe - Delta 14
Rockwell Delta 14 Lathe Will be disconnected by seller for easy pick up by winning bidder Forklift onsite to assist

5
Lathe Jet TL25
Jet TL25 lathe Will be disconnected by seller for easy pick up by winning bidder Forklift onsite to assist

9
Lathe - Omniturn Hardinge with Controller
Lathe - Omniturn Hardinge with controls Will be disconnected by seller for easy pick up by winning bidder Forklift onsite to assist

5
Lathe Tooling, Collets, etc - Large Lot
Tooling and collets for lathes. Known to fit the Jet GH1840ZX Lathe, and also fits the SuperMax vertical milling machine. Since these can work with both machines, they are being auctioned as a seperate lot. All for one price

10
Lathe Tooling, Collets, etc - Large Lot
Tooling and collets for lathes. Known to fit the Jet GH1840ZX Lathe, and also fits the SuperMax vertical milling machine. Since these can work with both machines, they are being auctioned as a seperate lot. All for one price

5
Lathe Leveler and Micrometers
Lathe leveler, micrometers, etc

11
Lathe Leveler and Micrometers
Lathe leveler, micrometers, etc

5
Decimal Equivalents Chart
Plastic decimal equivalents chart $1 bill is for scale and is not included

12
Warehouse Enclosure - Sand Blasting, Office, etc
Self contained warehouse enclosure for offices, or particulate containment. Currently used for sandblasting Dimensions are 8ft 4 inches wide, 10ft 4 inches deep, and 7ft 3 inches tall This is for the booth only, equipment inside are listed as seper...

6
Gantry Crane - Overhead w/ 1000 lb Hoist
Overhead Hoist Gantry Crane with 1000 lb hoist 20ft wide, and 10.5 feet tall Bidder responsible for removal - it is not anchored to the floor, so removal should be fairly simple after unbolting and lowering the overhead beam. We do have a forklift o...

6
Overhead Crane - w/ 500lb hoist (under mezzanine)
Overhead crane - hoist - 500lbs - with track (unit is currently mounted under large mezzanine - will be removed/uninstalled by seller for easy pick up.

13
Sandblaster Cabinet - Zero Blast n Peen
Zero Blast 'n Peen sandblaster & cabinet Forklift onsite to assist

6
Hoist - 500 lb - Brand = CM
CM brand chain Chain hoist - 500 lbs

6
Hoist - 500 lb - Brand = CM
CM brand chain Chain hoist - 500 lbs

14
Sandblaster - Portable, on cart
Lindsay Portable sandblaster on cart

6
Hoist Winch - Northern Industrial
Northern industrial hoist - winch - no other items in pictures are included

6
Hoist Winch - Northern Industrial
Northern industrial hoist - winch - no other items in pictures are included

15
Vertical Milling Machine - Supermax
Supermax vertical milling machine Will be disconnected by seller for easy pick up by winning bidder. Forklift onsite to assist

7
Vertical Milling Machine - Supermax
Supermax vertical milling machine Will be disconnected by seller for easy pick up by winning bidder. Forklift onsite to assist

16
Bandsaw - Vertical
Vertical Bandsaw with extra blades. Disconnected by seller for easy pick up by winning bidder Forklift onsite to assist

8
Bandsaw - Vertical
Vertical Bandsaw with extra blades. Disconnected by seller for easy pick up by winning bidder Forklift onsite to assist

9
Paint Booth - Updraft Ventilation Booth
Updraft ventilation booth for painting, includes spray equipment in pictures. Air handling units not included Approximately 8ft 4 inches wide, 10ft 4 inches deep, and 7ft 2 tall. Rigging services and/or labor will be required to remove from the buil...

9
Paint Booth - Ventilated - for airbrush, etc
Paint booth only. Air handling system is in a different lot Rigging services and/or labor will be required to remove from the building and this is not included. It is up to the winning bidder to provide labor for this. However we will have forklift...

10
Robot Trim Enclosure w/ Fanuc Robot - SEE UPDATE!
UPDATE: For this lot, and this lot only, more time can be given for pickup/removal, including the following week after the auction (but this must be scheduled with us, and complete removal must be finished by noon on Friday March 24th. However, all p...

11
Hydraulic Press 35 Ton - Packard
35 ton hydraulic press Forklift onsite to assist

12
Hydraulic Press
Hydraulic press Forklift onsite to assist

22
Paint Booth - Updraft Ventilation Booth
Updraft ventilation booth for painting, includes spray equipment in pictures. Air handling units not included

13
Sandblaster Cabinet - Zero Blast n Peen
Zero Blast 'n Peen sandblaster & cabinet Forklift onsite to assist

23
Hydraulic Press 35 Ton - Packard
35 ton hydraulic press Forklift onsite to assist

13
Sandblaster - Portable, on cart
Lindsay Portable sandblaster on cart

24
Compressed Air Back Up Tank
Back up air tank for compressed air system Disconnected for easy pick up

14
JESCO Self Dumping Hopper - Dumpster - larger
Jesco 2.5 Yard Self Dumping Hopper Dumpster, model 211761. 2000 pound capacity. Dimensions are 60 inches wide, 64 deep, and 51 tall.

25
Hoist - 500 lb
Chain hoist - 500 lbs

14
JESCO Self Dumping Hopper - Dumpster - smaller
Jesco self dumping hopper dumpster. We cannot read the data tag or model number, so the volume and weight capacity are not know. It is appears about 15% smaller than the other unit for auction. The dimensions are: 57 inches wide, 61 deep, and 37 ta...

26
Hydraulic Press
Hydraulic press Forklift onsite to assist

17
Pallet Rack #1 - located near the far corner
Pallet rack - located near the far corner of the building, next to but not including the L-shaped pallet racks Buyer responsible for disassembly

18
Pallet Racks #2 (3 section L-shape) far corner
Pallet racks - L-shape unit - located near the far corner of building Buyer responsible for disassembly

19
Pallet Racks #3 (2 section) includes IBC Tote
Pallet Racks - 2 sections - Includes IBC Tote seen in pictures on rack. Located near garage bay door and fire exit Buyer responsible for disassembly

20
Pallet Racks #4 (2 section)
Pallet racks Buyer responsible for disassembly

21
Pallet Stacker Forklift - Straddle Stacker
Pallet Stradde Stacker forklift Needs battery - unit works Forklift onsite to assist in loading

27
Mixer - ProMix Plural Component Proportioner
ProMix Easy Plural Component Proportioner Mixer Forklift onsite to assist

28
Mixers (2) Bracket Mount Mixers
This lot contains (2) INDCO bracket mount mixers, and an additonal mixer head. Configured to mount ontop of an IBC tote frame to mix the contents of tote.

29
Mixer - Handheld
Hand held mixing unit

30
Motors - Electric - 2 Pallets
2 Pallets of various electric motors and power switches. See pictures for data plates & info

31
Pad Printer 6-color Kent PP2000e
Pad Printer PP2000e 6 Color Forklift onsite to assist

32
Oven - Electric - Large - for Urethane Molds
Oven - Urethane molds. On wheels (heavy duty needle bearing warehouse cart) electric

33
Oven - Electric - Urethane Molds #2
Electric oven for urethane molds

38
Robot Trim Enclosure w/ Fanuc Robot, & Air Handler
Robot Trim Enclosure with Fanuc Robot and air hanlder filtration & dust/particulate control Comes with controller, manuals, & software Buyer responsible for disassembly Forklift onsite to assist

34
Oven - Electric - Urethane Molds #3
Electric oven for urethane molds

35
Oven - electric - tabletop - for urethane molds #4
Tabletop Electric oven for urethane molds

36
Chiller - Maximum MK Series Portable Chiller
Maximum MK Series portable chiller Forklift onsite to assist

37
Plural Component Proportioner - Reactor E-XP2
This lot consists of (2) Reactor E-XP2 plural component proportioners. Both units for one price. Forklift onsite to assist

39
Sprayer Carts with sprayers - paint
This lot consists of (3) sprayer carts & sprayers All 3 units for one price

40
Scale - Pallet Scale - grey - #1
Pallet scale Forklift onsite to assist

41
Scale - Pallet Scale - blue - #2
Pallet Scale Forklift onsite to assist

45
Welding Cart with Victory gauges, lines, torch
Welding cart with Victory gauges, lines, torch, & brand new in box welding helmet.


43
Scales - Balance Scales - misc lot
Misc Lot of tabletop balance scales

46
Welding Table with tons of welding clamps
Welding table with tons of welding clamps All for one price

44
Stairs - Rolling Warehouse Stocking Staircase
Rollng warehouse stock staircase

47
Welding Table - with removable urethane insulated
Welding table with removable urethane insulated cover

45
Welding Cart with Victory gauges, lines, torch
Welding cart with Victory gauges, lines, torch, & brand new in box welding helmet.

45
Welding Table with tons of clamps, tools & grinder
Welding table with tapped/threaded jig holes, and tons of welding clamps, tooling, and angle grinder All for one price

45
Welding Table - with removable urethane insulated
Welding table with removable urethane insulated cover

45
Welding Table - Metal Top with Heavy Vise
Metal top work table with heavy duty Wilson 4500 vise. Contents of table not included, this auction lot is for just the table and the vise.

48
Transformer - Universal #1 (large)
Universal Transformer Forklift onsite to assist

49
Transformer - Universal #2
Universal Transformer Forklift onsite to assist

50
Workbench Worktable - Heated Top (very thick) #2
Heated top metal worktable with a very thick metal top (see dollar bill in pictures for scale). This is for the table only, contents and items on top are not included. Forklift onsite to assist

54
Fluid Transfer Cart w/ 50 Gallon Drum
All mounted on pallet jack for easy use. Fluid transfer cart

51
Workbench Worktable Heated Top - #1
Heated top metal worktable - this is the heated worktable with the thinner top than the other one. This is for the table only, contents and items on top are not included Forklift onsite to assist

52
Flammables Storage Cabinet #1
Storage cabinet for flammables


53
Flammables Storage Cabinet #2
Storage cabinet for flammables

54
Flammables Storage Cabinet (sandblast area)
Steel cabinet for flammables storage








66
Paint Booth - Ventilated - for airbrush, etc
Paint booth only. Air handling system is in a different lot

63
Steel Bolts Organizer with nuts, bolts, fasteners
Very large lot of nuts, bolts, fasteners, organizer All for one money.


64
Shelving - Steel - Large Lot
Large lot of steel shelving - winning bidder must take all. See video. All for one price Must take all.

65
(13) Large U-Shape Stock Warehouse Carts -
(13) large u-shape warehouse stock carts All for 1 money

67
(2) Air Handling Units
(2) Airflow Systems air handling units. Each unit is approximately 12.5 feet tall, 55 inches wide, and 48 inches deep. Model 2400 VOM. They are disconnected and ready for pick up by winning bidder. Rigging services, labor, and equipment will be neede...

68
Wall Lockers - easy removal
Room full of steel wall lockers- Units have been unfastened from wall/floor and are located next to exit door for super easy removal. Includes an additional wall locker unit located in the tool room All for one price



71
Grease Guns - All for one money
Grease Guns All for one price

72
Etching Print Maker
Print Maker (light etching) with spare bulbs, etc

73
Drill Press - Rockwell Delta 15
Rockwell Delta 15 Drill Press


75
Drill Press w/ parts
Unknown working condition

76
Drill Bit Lot
Table full of misc drill bits


77
Toolbox - FULL OF TOOLS!!! - on wheels -Steel
Black steel Craftsman tool box with tools, and red steel toolbox next to it... All for one price

79
Dollies for Steel Drums - Large Lot
Large lot of dollies for 50 gallon steel drums All for one price

78
Tool Box - Rolling - FULL OF TOOLS! (poly)
Rolling Craftsman Plastic-Poly Toolbox FULL OF TOOLS! Toolbox and contents only, nothing else in pictures are included. All for one price

81
Air Cleaner -MFG Industrial (near sandblast booth)
MFG industrial Air Cleaner Forklift onsite to assist

81
(2) Hydraulic Pumps & Motors - powers 4 units
A set of 2 matching industrial sized hydraulic pumps with twin motors on each unit. Each unit can power 2 large machines, and holds approximately 100 gallons of hydraulic fluid. Were used to power the 2 Fanuc robots you see in the pictures (Robots ar...



80
Air - dust - Filtration - Steel Drum Mounted
Steel Drum mounted particulate air filters (2) Both for one price

81
Refrigerator - Hallway
Dimensions are 66.25 inches tall, 29.75 wide, and 32 deep

83
Shop Lights - Portable - Lot of 3
Lot of 3 portable shop lights All 3 for one price

84
Fans - Portable Shop Fans - Lot of 9
Lot of 9 warehouse shop fans All for one price




91
Cabinet - Steel Parts Cabinet -Empty - #2
Cabinet is empty, and locked - no key

Gallery Images Loading, Please Wait...
  • Home
  • Hire an Auction Company
  • Add Your Auction Company
  • Member Login
  • Contact Us
  • Desktop Site
Return
Industrial Equipment/Tools/Office Furniture - Winchester VA
 Online Only Auction
Auction Date(s)
Bidding Starts: Saturday Feb 11
Bidding Ends: Monday Mar 13
Auction Location

Winchester, VA 22602
Listing Terms and Conditions
BidTender Auctions, Inc., - Terms and Conditions The following terms and conditions apply to bidders, sellers, and participants in any auctions or events held, owned, or managed by BidTender Auctions, Inc., and/or assigns. It is your responsibility, prior to bidding, to ensure that you fully understand all terms and conditions defined herein. All Bidders and participants have complete and full knowledge of this agreement at registration for our auctions, and agree to be bound by these terms and conditions. * BidTender Auctions, Inc., shall herein/hereafter be referred to as BidTender Auctions, Auctioneer, and/or BTA, and these terms shall be interchangeable. * Bidder/Buyer/Purchaser will herein/hereafter collectively be referred to as Bidder. * Registering to bid with BidTender Auctions constitutes acknowledgement and acceptance of terms and conditions mentioned herein. These terms may be occasionally be updated, and continuance of participation and/or registration by Bidder constitutes full and future acceptance. * All lots are sold at auction, and are sold without warranty, expressed, or implied, and are sold as-is, where-is, along with any and all faults or discrepancies that may or may not be present. BTA, and/or the seller, makes no representation as to the safety, quality, condition, completeness, or operation of any items sold at auction. Although inspection/preview is not a requirement to bid, BTA encourages in-person preview/inspections on all items prior to bidding. * Bidder enters any auction site, property, or facility controlled or managed by BidTender Auctions, at his/her own risk, and agrees to hold harmless BTA for injury, accidents, and damages. * Due Diligence: BTA, and/or sellers/consignors strongly encourage all bidders to exercise due diligence prior to bidding on any items. This should include, but not be limited to, in-person inspections, hired technicians, and expert advice from a neutral party. Refunds are at the sole and absolute discretion of BTA. Preview inspections, when available, will be offered during a specified window of time, on a specified date(s). * Bidder acknowledges and accepts that errors may or may not be present in photographs, catalogs, descriptions, and any other information via written, spoken, or advertised. Bidder must communicate any errors or omissions to BTA, in writing or in person, prior to removal of purchased items. Bidder acknowledges that once an item has been removed from the auction site Bidder shall automatically assume full acceptance of items, complete with any and all faults, errors, or omissions. * BTA, as a convenience to the seller and the auction process, will try to have equipment and utilities disconnected, and purchased items ready for removal by the Bidder. But if BidTender Auctions does not have disconnections, removal, or any other convenience service(s) performed, for any reasons as deemed appropriate by BidTender Auctions, Bidder hereby acknowledges and reaffirms that it is the sole responsibility of the Bidder to safely disconnect and remove the their purchased items, without help or assistance from BTA, Seller, or the Consignor. Bidder also agrees to hold harmless BTA and/or the seller/consignor, of any liability, injury, or damages, and bidder hereby accepts sole responsibility for their own safety and the safety of anyone hired or with Bidder, when entering, while on, and when exiting the auction site. Bidder/buyer acknowledges and accepts the dangers inherent to auction sites, commercial equipment, and removing equipment, fall hazards, slipping or tripping hazards, utility connections, and any other potential or unpredictable hazards and/or harm not described herein. Bidder also agrees that at no time shall children or pets be permitted to enter the auction site (service animals are allowed). * BidTender Auctions, and/or assigns reserves the right to deny or revoke access to the auction site if Bidder behaves in a manner that BTA deems dangerous, inappropriate, or disruptive. Bidder also accepts all responsibility, financially and otherwise, for any damage or injury caused to the auction site, other people, building, equipment, vehicles, or any other property, due to actions, accident, or negligence by the Bidder and/or any parties hired by, representing, or helping Bidder. * If Bidder fails to remove any of their items by the end of the scheduled pickup date, BTA may, at their sole discretion, consider those items abandoned, and dispose of them in any manner BTA chooses. This may include, but is not limited to, selling at another auction or sale and BTA retaining any monies recovered, hauling away or storing for future disposal; and BTA reserves the right to charge bidder for reasonable disposal and/or storage fees. Should any items be abandoned by Bidder, Bidder shall lose all rights to said items, no refunds shall be issued to the Bidder, and any monies still due to Seller or BTA shall still be in force, immediately due, and payable to BTA. * When auction concludes, bidder agrees to have BTA charge their credit card on file for all items won, including fees, taxes, etc., as represented in the invoice which shall be emailed to Bidder at email address provided by Bidder during registration. Failure to receive invoice does not relieve Bidder of obligation to pay debt in full. Payment shall be completed within 24 hours of auction closing, unless prior agreement has been entered into and agreed upon, in writing, by BTA and the Bidder. Bidder also agrees not to initiate chargebacks against BidTender Auctions Inc., for any reason. * Bidder acknowledges that their bid is a legally binding contract with BTA, and Bidder agrees that BTA may use any legal means necessary for collecting or enforcing specific performance, which is defined in these terms and conditions. Collection costs, and legal costs incurred by BTA, shall also be borne by, and become the absolute responsibility of Bidder. * Bidder hereby agrees, that in the event of a dispute, where the parties involved are unable to come to a resolution, all further negotiations shall be handled , negotiated and settled through a third-party mutual arbitrator. Any and all fees, expenses, or costs of arbitration, for either party, shall be borne by, and become the sole and absolute responsibility of Bidder. * BTA reserves the right to have charge limits on any invoices, and require wire transfer, or certified bank check for any invoices over a certain threshold, or for any reason whatsoever as determined by BTA. Bidder agrees that all sales are final. Credit cards will not be accepted as payment for any items requiring shipping, and Bidder acknowledges that wire transfers are the only method of payment accepted for shipping. * Should Bidder default on full payment of invoice by the date due, BTA may seek any and actions allowed by law, and BTA may retain any and all monies and/or consideration, received as a deposit or otherwise, as a form of liquidated damages. Any of the Bidder's items that are not paid for and/or removed within the specified and advertised times, may be disposed of, or resold at public or private sale or auction, without further notice, and any deficiency, fiscal or otherwise, together with all expenses and of re-sale costs, will become the debt of, and be charged to the defaulting Bidder. * All fluids, oils, coolants, chemicals, fuels, gases, if required by federal, state, or local laws, ordinances, or shipping requirements, must be removed prior to removal and/or shipment. Bidder acknowledges and accepts this responsibility, and holds harmless BTA, Seller, Consignor, and any other entities affiliated with BTA from any and all claims or future claims for damages, injury, proximal consequence, environmental impact, or any other liabilities. * Shipping: BTA will offer shipping via USPS, UPS, FedEx, Freight, and/or other manner, as determined by BTA, solely at cost to the Bidder. Bidder should contact BTA immediately following auction closing if shipping arrangements are requested by Bidder. Under no circumstances will BTA ship Bidder's items until all invoices are paid and settled via wire transfer, including shipping costs. Additional, reasonable fees for shipping-related services may be applicable. These additional fees can be, but are not limited to a fifty-dollar ($50.00) palletization fee, a fifteen-dollar ($15.00) packing/boxing/labeling fee, a transport fee for transport of Bidder items to a shipping facility, liftgate fees, and postage or other shipment charges/expenses/costs/fees that may be charged to BTA by FedEx, UPS, USPS, etc. BTA is unable to estimate shipping expenses without knowing destination, exact items to be shipped, and exact weight after palletiziation and/or packaging. Therefore BTA recommends Bidder use the approximated dimensions of item provided by BTA in the lot descriptions, along with visiting the manufacturers website for weights as specified on their Spec Sheet, data sheet, or manuals, then cross referencing that data with a shipping company or freight company cost estimate tool. For Bidder convenience, BTA has commercial accounts set up with companies such as XPO Logistics, and Old Dominion Freight, and can provide shipping through them for a lower cost than is typically available to the public. * BTA reserves the right to deny access, exclude, or refuse service to any individual, or parties, for any reason whatsoever, without explanation, provided such refusal is legal and does not violate federal, state, or local law(s). * Any dollies, pallet jacks, pallets, or other items shown in the lot pictures, other than the lot in the description, are not included in the sale, and are only in the pictures as needed to better facilitate safely moving the lot around for photography. * If any item Bidder purchases is, for any reason, not available, or missing, any liability of BTA shall be limited to a refund of the purchase price of that item. * A buyer's premium of fifteen percent (15%), charged by BTA, shall be added to the total of all invoices, and is payable to BTA. BTA will offer a 3% discount for cash payments, which may be made at auction pick up, however Bidder must bring payment in exact amount specified on invoice, as change may not be available. * Sales Tax: Sales tax will be charged after all bids, fees, premiums, and totals have been calculated, then added to the Bidder's invoice, applicable to the rates and laws of the state and/or jurisdictions the auction(s) are/were held in. If you are legally exempt from sales tax, you must submit the proper documentation and credentials to BTA. As of the date these terms and conditions were drafted, the sales tax rate for Fairfax County Virginia is/was (6%), Maryland (6%), and DC (6%); however additional local and/or jurisdictional taxes may apply. * Currency type for all transactions and debts with BTA shall be in the form of USD (United States Dollar). Auction Location: 250 Independence Dr WInchester, VA 22602
Recently closed manufacturing facility in Winchester, VA is liquidating industrial machinery, tools, pallet racks & shelving, air handling units, paint booths, HAZMAT management enclosure skid, urethane mold ovens, lathes, vertical milling machines, Herman Miller office partitions, cubicles, desks, lateral file cabinets, and so much more! 3-days for removal, including a Saturday! Forklifts onsite to assist. Shipping not available for this auction, all items must be picked up in person except as otherwise noted in individual lots. In Person Preview is Saturday, March 11th from 12-3pm. You may pick up your items on the scheduled pick up days at: 250 Independence Dr Winchester, VA 22602 Pick Up Dates/Times are as Follows: Thursday March 16th from 10am-4pm Friday March 17th from 10am-4pm Saturday March 18th from 10am-4pm All equipment will be professionally disconnected by seller, and ready for you to pick up on scheduled pick up days. Office furnishings/cubicles/partitions, and Herman Miller furniture will need to be disassembled by winning bidders. This auction is packed with well maintained industrial machinery, lathes, vertical milling machines, air/exhaust/fume handling & dust removal units, hazmat management equipment, steel I-beam mezzanines, Herman Miller office equipment and furnishings, and so much more. Bidding is now open and starts closing at 8pm on Monday, March 13th. All equipment is fully functional and was still in use until the end of this month. The company is still in operation, and has been in Winchester for over 35 years. They're consolidating facilities and will continue operations at their other locations. It's a great opportunity to upgrade your current equipment, or increase your current capability and output. Forklifts will be onsite to assist. Easy access to the building for Tractor Trailers and large trucks, and conveniently located within a few miles of Interstate 81. Facility is equipped with a full size loading dock, and also a ground level loading dock. Address is: MPC Creative Urethanes LLC 250 Independence Dr Winchester, VA 22602 All items must be removed by 4pm on Saturday March 18th, or items will be considered abandoned, disposed of, and no refunds will be given. Additional charges for removal & disposal will apply if items are not picked up by deadline. New tenant will be taking over facility, so we cannot extend the pick up deadline. If you cannot pick up by the end of the scheduled pick up days, please do not bid.

1
Steel Mezzanine 16 x 18ft - already disassembled
Steel Mezanine with staircase Approximately 16ft wide, and 18ft deep. Clearance underneath is 8ft Height to top of floor is 9ft 4 inches (not including safety hand rails) The mezzanine will be disassembled by the seller and ready for pick up by winn...

2
Steel Mezzanine 33 x 24ft - already disassembled
Steel mezzanine without staircase. Does not include the small overhead hoist crane mounted underneath (that is a separate lot) Approximately 33ft wide, and 24ft deep. Clearance underneath is 9.5ft Height to top of floor is 10ft not including safety h...

3
(2) Air Handling Units
(2) Airflow Systems air handling units. Model 2400 VOM Disconnected and ready for easy pick up by winning bidder You get both units for one price. Forklift onsite to assist

3
Hazmat Storage Container on Skid - self contained
Hazmat Storage Container built-in skid - self contained Dimensions are 116 inches wide, 82 deep, and 90 tall. Forklift onsite to assist in loading

4
Gantry Crane - Overhead Hoist
Overhead Hoist Gantry Crane Bidder responsible for removal - it is not anchored to the floor

4
Warehouse Enclosure - Office, etc
Winning bidder responsible for disassembly and removal. Forklift onsite to help load. Self contained warehouse enclosure for offices, or particulate containment. Currently used for sandblasting and paint booth. Enclosure only, paint booth or sandblas...

5
Hazmat Storage Container on Skid - self contained
Hazmat Storage Container built-in skid - self contained Forklift onsite to assist in loading

5
Lathe - Jet GH 1840ZX
Jet GH 1840ZX lathe with tooling 93 inches wide, 24 deep, and 53 tall Will be disconnected by seller for easy pick up by winning bidder Forklift onsite to assist.

6
Lathe - Jet GH 1840ZX
Jet GH 1840ZX lathe with tooling Will be disconnected by seller for easy pick up by winning bidder Forklift onsite to assist.

5
Lathe - Delta 14
Rockwell Delta 14 Lathe 23 inches deep, 87 wide, and 51 tall Will be disconnected by seller for easy pick up by winning bidder Forklift onsite to assist

7
Lathe Jet TL25
Jet TL25 lathe Will be disconnected by seller for easy pick up by winning bidder Forklift onsite to assist

5
Lathe - Omniturn Hardinge with Controller
Lathe - Omniturn Hardinge with controls Will be disconnected by seller for easy pick up by winning bidder Forklift onsite to assist

8
Lathe - Delta 14
Rockwell Delta 14 Lathe Will be disconnected by seller for easy pick up by winning bidder Forklift onsite to assist

5
Lathe Jet TL25
Jet TL25 lathe Will be disconnected by seller for easy pick up by winning bidder Forklift onsite to assist

9
Lathe - Omniturn Hardinge with Controller
Lathe - Omniturn Hardinge with controls Will be disconnected by seller for easy pick up by winning bidder Forklift onsite to assist

5
Lathe Tooling, Collets, etc - Large Lot
Tooling and collets for lathes. Known to fit the Jet GH1840ZX Lathe, and also fits the SuperMax vertical milling machine. Since these can work with both machines, they are being auctioned as a seperate lot. All for one price

10
Lathe Tooling, Collets, etc - Large Lot
Tooling and collets for lathes. Known to fit the Jet GH1840ZX Lathe, and also fits the SuperMax vertical milling machine. Since these can work with both machines, they are being auctioned as a seperate lot. All for one price

5
Lathe Leveler and Micrometers
Lathe leveler, micrometers, etc

11
Lathe Leveler and Micrometers
Lathe leveler, micrometers, etc

5
Decimal Equivalents Chart
Plastic decimal equivalents chart $1 bill is for scale and is not included

12
Warehouse Enclosure - Sand Blasting, Office, etc
Self contained warehouse enclosure for offices, or particulate containment. Currently used for sandblasting Dimensions are 8ft 4 inches wide, 10ft 4 inches deep, and 7ft 3 inches tall This is for the booth only, equipment inside are listed as seper...

6
Gantry Crane - Overhead w/ 1000 lb Hoist
Overhead Hoist Gantry Crane with 1000 lb hoist 20ft wide, and 10.5 feet tall Bidder responsible for removal - it is not anchored to the floor, so removal should be fairly simple after unbolting and lowering the overhead beam. We do have a forklift o...

6
Overhead Crane - w/ 500lb hoist (under mezzanine)
Overhead crane - hoist - 500lbs - with track (unit is currently mounted under large mezzanine - will be removed/uninstalled by seller for easy pick up.

13
Sandblaster Cabinet - Zero Blast n Peen
Zero Blast 'n Peen sandblaster & cabinet Forklift onsite to assist

6
Hoist - 500 lb - Brand = CM
CM brand chain Chain hoist - 500 lbs

6
Hoist - 500 lb - Brand = CM
CM brand chain Chain hoist - 500 lbs

14
Sandblaster - Portable, on cart
Lindsay Portable sandblaster on cart

6
Hoist Winch - Northern Industrial
Northern industrial hoist - winch - no other items in pictures are included

6
Hoist Winch - Northern Industrial
Northern industrial hoist - winch - no other items in pictures are included

15
Vertical Milling Machine - Supermax
Supermax vertical milling machine Will be disconnected by seller for easy pick up by winning bidder. Forklift onsite to assist

7
Vertical Milling Machine - Supermax
Supermax vertical milling machine Will be disconnected by seller for easy pick up by winning bidder. Forklift onsite to assist

16
Bandsaw - Vertical
Vertical Bandsaw with extra blades. Disconnected by seller for easy pick up by winning bidder Forklift onsite to assist

8
Bandsaw - Vertical
Vertical Bandsaw with extra blades. Disconnected by seller for easy pick up by winning bidder Forklift onsite to assist

9
Paint Booth - Updraft Ventilation Booth
Updraft ventilation booth for painting, includes spray equipment in pictures. Air handling units not included Approximately 8ft 4 inches wide, 10ft 4 inches deep, and 7ft 2 tall. Rigging services and/or labor will be required to remove from the buil...

9
Paint Booth - Ventilated - for airbrush, etc
Paint booth only. Air handling system is in a different lot Rigging services and/or labor will be required to remove from the building and this is not included. It is up to the winning bidder to provide labor for this. However we will have forklift...

10
Robot Trim Enclosure w/ Fanuc Robot - SEE UPDATE!
UPDATE: For this lot, and this lot only, more time can be given for pickup/removal, including the following week after the auction (but this must be scheduled with us, and complete removal must be finished by noon on Friday March 24th. However, all p...

11
Hydraulic Press 35 Ton - Packard
35 ton hydraulic press Forklift onsite to assist

12
Hydraulic Press
Hydraulic press Forklift onsite to assist

22
Paint Booth - Updraft Ventilation Booth
Updraft ventilation booth for painting, includes spray equipment in pictures. Air handling units not included

13
Sandblaster Cabinet - Zero Blast n Peen
Zero Blast 'n Peen sandblaster & cabinet Forklift onsite to assist

23
Hydraulic Press 35 Ton - Packard
35 ton hydraulic press Forklift onsite to assist

13
Sandblaster - Portable, on cart
Lindsay Portable sandblaster on cart

24
Compressed Air Back Up Tank
Back up air tank for compressed air system Disconnected for easy pick up

14
JESCO Self Dumping Hopper - Dumpster - larger
Jesco 2.5 Yard Self Dumping Hopper Dumpster, model 211761. 2000 pound capacity. Dimensions are 60 inches wide, 64 deep, and 51 tall.

25
Hoist - 500 lb
Chain hoist - 500 lbs

14
JESCO Self Dumping Hopper - Dumpster - smaller
Jesco self dumping hopper dumpster. We cannot read the data tag or model number, so the volume and weight capacity are not know. It is appears about 15% smaller than the other unit for auction. The dimensions are: 57 inches wide, 61 deep, and 37 ta...

26
Hydraulic Press
Hydraulic press Forklift onsite to assist

17
Pallet Rack #1 - located near the far corner
Pallet rack - located near the far corner of the building, next to but not including the L-shaped pallet racks Buyer responsible for disassembly

18
Pallet Racks #2 (3 section L-shape) far corner
Pallet racks - L-shape unit - located near the far corner of building Buyer responsible for disassembly

19
Pallet Racks #3 (2 section) includes IBC Tote
Pallet Racks - 2 sections - Includes IBC Tote seen in pictures on rack. Located near garage bay door and fire exit Buyer responsible for disassembly

20
Pallet Racks #4 (2 section)
Pallet racks Buyer responsible for disassembly

21
Pallet Stacker Forklift - Straddle Stacker
Pallet Stradde Stacker forklift Needs battery - unit works Forklift onsite to assist in loading

27
Mixer - ProMix Plural Component Proportioner
ProMix Easy Plural Component Proportioner Mixer Forklift onsite to assist

28
Mixers (2) Bracket Mount Mixers
This lot contains (2) INDCO bracket mount mixers, and an additonal mixer head. Configured to mount ontop of an IBC tote frame to mix the contents of tote.

29
Mixer - Handheld
Hand held mixing unit

30
Motors - Electric - 2 Pallets
2 Pallets of various electric motors and power switches. See pictures for data plates & info

31
Pad Printer 6-color Kent PP2000e
Pad Printer PP2000e 6 Color Forklift onsite to assist

32
Oven - Electric - Large - for Urethane Molds
Oven - Urethane molds. On wheels (heavy duty needle bearing warehouse cart) electric

33
Oven - Electric - Urethane Molds #2
Electric oven for urethane molds

38
Robot Trim Enclosure w/ Fanuc Robot, & Air Handler
Robot Trim Enclosure with Fanuc Robot and air hanlder filtration & dust/particulate control Comes with controller, manuals, & software Buyer responsible for disassembly Forklift onsite to assist

34
Oven - Electric - Urethane Molds #3
Electric oven for urethane molds

35
Oven - electric - tabletop - for urethane molds #4
Tabletop Electric oven for urethane molds

36
Chiller - Maximum MK Series Portable Chiller
Maximum MK Series portable chiller Forklift onsite to assist

37
Plural Component Proportioner - Reactor E-XP2
This lot consists of (2) Reactor E-XP2 plural component proportioners. Both units for one price. Forklift onsite to assist

39
Sprayer Carts with sprayers - paint
This lot consists of (3) sprayer carts & sprayers All 3 units for one price

40
Scale - Pallet Scale - grey - #1
Pallet scale Forklift onsite to assist

41
Scale - Pallet Scale - blue - #2
Pallet Scale Forklift onsite to assist

45
Welding Cart with Victory gauges, lines, torch
Welding cart with Victory gauges, lines, torch, & brand new in box welding helmet.

42

43
Scales - Balance Scales - misc lot
Misc Lot of tabletop balance scales

46
Welding Table with tons of welding clamps
Welding table with tons of welding clamps All for one price

44
Stairs - Rolling Warehouse Stocking Staircase
Rollng warehouse stock staircase

47
Welding Table - with removable urethane insulated
Welding table with removable urethane insulated cover

45
Welding Cart with Victory gauges, lines, torch
Welding cart with Victory gauges, lines, torch, & brand new in box welding helmet.

45
Welding Table with tons of clamps, tools & grinder
Welding table with tapped/threaded jig holes, and tons of welding clamps, tooling, and angle grinder All for one price

45
Welding Table - with removable urethane insulated
Welding table with removable urethane insulated cover

45
Welding Table - Metal Top with Heavy Vise
Metal top work table with heavy duty Wilson 4500 vise. Contents of table not included, this auction lot is for just the table and the vise.

48
Transformer - Universal #1 (large)
Universal Transformer Forklift onsite to assist

49
Transformer - Universal #2
Universal Transformer Forklift onsite to assist

50
Workbench Worktable - Heated Top (very thick) #2
Heated top metal worktable with a very thick metal top (see dollar bill in pictures for scale). This is for the table only, contents and items on top are not included. Forklift onsite to assist

54
Fluid Transfer Cart w/ 50 Gallon Drum
All mounted on pallet jack for easy use. Fluid transfer cart

51
Workbench Worktable Heated Top - #1
Heated top metal worktable - this is the heated worktable with the thinner top than the other one. This is for the table only, contents and items on top are not included Forklift onsite to assist

52
Flammables Storage Cabinet #1
Storage cabinet for flammables

57

53
Flammables Storage Cabinet #2
Storage cabinet for flammables

54
Flammables Storage Cabinet (sandblast area)
Steel cabinet for flammables storage

55

56

58

59

60

61

62

66
Paint Booth - Ventilated - for airbrush, etc
Paint booth only. Air handling system is in a different lot

63
Steel Bolts Organizer with nuts, bolts, fasteners
Very large lot of nuts, bolts, fasteners, organizer All for one money.

67

64
Shelving - Steel - Large Lot
Large lot of steel shelving - winning bidder must take all. See video. All for one price Must take all.

65
(13) Large U-Shape Stock Warehouse Carts -
(13) large u-shape warehouse stock carts All for 1 money

67
(2) Air Handling Units
(2) Airflow Systems air handling units. Each unit is approximately 12.5 feet tall, 55 inches wide, and 48 inches deep. Model 2400 VOM. They are disconnected and ready for pick up by winning bidder. Rigging services, labor, and equipment will be neede...

68
Wall Lockers - easy removal
Room full of steel wall lockers- Units have been unfastened from wall/floor and are located next to exit door for super easy removal. Includes an additional wall locker unit located in the tool room All for one price

69

70

71
Grease Guns - All for one money
Grease Guns All for one price

72
Etching Print Maker
Print Maker (light etching) with spare bulbs, etc

73
Drill Press - Rockwell Delta 15
Rockwell Delta 15 Drill Press

74

75
Drill Press w/ parts
Unknown working condition

76
Drill Bit Lot
Table full of misc drill bits

78

77
Toolbox - FULL OF TOOLS!!! - on wheels -Steel
Black steel Craftsman tool box with tools, and red steel toolbox next to it... All for one price

79
Dollies for Steel Drums - Large Lot
Large lot of dollies for 50 gallon steel drums All for one price

78
Tool Box - Rolling - FULL OF TOOLS! (poly)
Rolling Craftsman Plastic-Poly Toolbox FULL OF TOOLS! Toolbox and contents only, nothing else in pictures are included. All for one price

81
Air Cleaner -MFG Industrial (near sandblast booth)
MFG industrial Air Cleaner Forklift onsite to assist

81
(2) Hydraulic Pumps & Motors - powers 4 units
A set of 2 matching industrial sized hydraulic pumps with twin motors on each unit. Each unit can power 2 large machines, and holds approximately 100 gallons of hydraulic fluid. Were used to power the 2 Fanuc robots you see in the pictures (Robots ar...

79

82

80
Air - dust - Filtration - Steel Drum Mounted
Steel Drum mounted particulate air filters (2) Both for one price

81
Refrigerator - Hallway
Dimensions are 66.25 inches tall, 29.75 wide, and 32 deep

83
Shop Lights - Portable - Lot of 3
Lot of 3 portable shop lights All 3 for one price

84
Fans - Portable Shop Fans - Lot of 9
Lot of 9 warehouse shop fans All for one price

85

86

87

91
Cabinet - Steel Parts Cabinet -Empty - #2
Cabinet is empty, and locked - no key