Williamsfield Valley Veneer
Previous Page Listing ID#: 1429699

Auction Location

Williamsfield, OH 44093
Auction Dates and TimesSALE IS COMPLETED
Wednesday Sep 21, 2022 Completed
Auction Type
 Live Auction 
Company Information
Bright Star Realty and Auctions, INC

Contact: Loren Beachy
Phone: 574-825-0704
Email: beachyauctions@gmail.com
Website: brightstarauctions.com

GoToAuction.com ID#: 5286
View company information and listings

Free Email Notifications

Sign up for the GoToAuction.com email notifications and we will let you know about sales in your area!  You may set up alerts by area (zip and radius), keywords, and by company.  It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions
There is a 13% online buyer’s premium in effect for all purchases. All items sell where is as is with no warranties or guarantees. Buyer is responsible to inspect all merchandise prior to placing bids. All items must be paid within 7 business days. Payment terms: Cash, check, wire transfer, or any major credit card. ($2,500 limit applies to credit card payments.). All items are pick-up only. Smalls must be removed within 2 days. All items must be removed within 60 days. Loadout  terms 45 days on installed items and 1 week for uninstalled. Please call agent for more info. Buyer shall assume responsibility of all property when auctioneer says sold. Auction company is not responsible for any missing or stolen items.

 

 

 

 

 

 

 

Bidder Terms and Conditions

These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer.
 
  1. Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
 
  1. Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded, where required, as follows:
IN, IL , WI , KY , OH , VA , AR , NY, NC, TN, MO .
 
  1. Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer: “Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction. “Absentee Bidder” means a person or entity that submits an Absentee Bid.
“Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION.
“Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids.
“Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected and where a Buyer may pick up Personal Property.

“Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder.

“Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms.

“Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer.
"Buyer" means the Winning Bidder with respect to each Lot of Personal Property or of each parcel of Real Property.
"Buyer's Premium" is an amount with respect to each Lot of Personal Property or with respect to each parcel of Real Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account. For Real Property offered Subject to Seller’s Confirmation, the Buyer’s Premium will be calculated on the amount of the High Bid Subject to Confirmation.

“Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property or Real Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation.

“Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer.

“High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot or on a parcel of Real Property.

“High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on Real Property put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price.
 
“High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot or a parcel of Real Property.

"Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event.

“Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer.

“No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale.

“Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions.

“Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online.

"Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered.

“Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers.

“Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer).

“Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms- length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction.

“Property” means the Real Property and the Personal Property.

“Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium. "Registered Bidder" means a person or entity that has registered to bid at the Auction.

“Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction.
“Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE.

“Reserve Price” means the minimum price that Seller is willing to accept for specific Property.

“Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer.

“Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid.

“Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by
Seller).

"Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid.

“Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction.

“Without Reserve” means Absolute.
 
 
  1. Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.
 
  1. Auction Conducted in the State of Indiana.
 
    1. For Auctions in the State of Indiana and Online. All Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are entered into in the State of Indiana, all bids and payments are received in the State of Indiana, and the Realty Purchase Agreement, if any, will be formed and entered into in the State of Indiana.
    2. For Auctions outside of the State of Indiana. All Property is offered for sale in the state of the Auction Site, and will be sold in the state of the Auction Site. Notwithstanding the physical location of any Bidder or any Participant, these Terms are entered into in the state of the Auction Site, all bids and payments are received in the state of the Auction Site, and the Realty Purchase Agreement, if any, will be formed and entered into in the state of the Auction Site.
 
  1. Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.

The Buyer’s Premium for Personal Property will be amount equal to thirteen percent ( 13%) of the Hammer Price for each Lot Knocked Down at the Auction.

The Buyer’s Premium for Real Property will be amount equal to percent ( %) of the Hammer Price for each parcel of Real Property Knocked Down at the Auction.
 
  1. Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
  2. Nature of the Auction.

X The Auction for the Personal Property is an Absolute Auction.

The Auction for the Personal Property is With Reserve. Auctioneer may Withdraw any Lot offered With Reserve prior to the Fall of the Hammer.
 
  1. Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
 
  1. No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
 
  1. Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
 
    1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
 
    1. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
 
    1. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
 
    1. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
 
    1. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
 
    1. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
 
    1. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
 
    1. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.
 
    1. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties,
(i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
 
    1. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
 
    1. No Reduction or Retraction of Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.
 
    1. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.
 
    1. Online Bids. Online bids may not be reduced or retracted.
 
  1. Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). Absentee Bids may be initiated and advances in accordance with Auctioneer’s policies and procedures. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
 
  1. Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
 
  1. Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
 
  1.  
 
  1. Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
 
  1. Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot or item of Personal Property or each parcel of Real Property will be the Buyer of such Property.
 
  1. All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
 
  1. Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
 
  1. Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.
 
  1. Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or
representation by Auctioneer
 
  1. Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
  1.  
Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
 
  1. Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ring man, or multiple bid assistants or ring men, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
 
  1. Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the

vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
 
  1. All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
 
  1. Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked- Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
 
  1. Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases must be paid for within five (5) days after the close of the Auction. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.
 
  1. Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Disassembly and removal shall be done in a workmanlike manner, and each Buyer shall indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer's employees, agents, representatives, or independent contractors, in connection with the disassembly or removal of any Personal Property. Any and all damages to the Auction Site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller.
 
  1. Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them.
 
  1. Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.
 
  1. No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
 
  1. Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
 
  1. Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.




 
  1. Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled
to specific performance or other equitable relief.
 
  1. Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
 
  1. Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
 
  1. Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
 
  1. Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
 
  1. Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
 
  1. Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim, suit or cause of action relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
 
  1. Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their respective rights hereunder.

 
Listing Information
This will be a nice sized  auction with some very good rolling stock

00
Information Lot
Complete liquidation of Williamsfield Valley Veneer in Williamsfield, Ohio, including HMC carriage, Precision chipper, Brewco Big Band Resaw, multiple Komatsu wheel loaders, Kenworth log truck, multiple chip trailers, and much more. 
QUESTIONS CONTACT EUGENE 260.350.8953 
LOADOUT: All uninstalled items MUST be removed within 10 days. Rolling stock MUST be removed within 10 days. Loadout is available on all items. 45 days for removal of installed equipment. Rigging is available. 
TRUCKING/SHIPPING: is available for all items by calling  Darrin at 574.349.8485 

98
Manual Sealless Steel Strapping Tool
Model A333, works for 1/2" 5/8" or 3/4" banding, new in box. Shipping available for $30

3

99
Heavy Equipment Key Set 39 Keys
Shipping available for $20

100
Milwaukee Cordless Grease Gun
New in case with battery and charger, 18V, MN 2646-20

101
Milwaukee Cordless Grease Gun
MN 2646-20, 18V, charger and 1 battery, good condition

102
Milwaukee Cordless Fuel Impact
MN 2864-20, 18V, 5.0 amp battery, charger, 3/4'' square ring

103
Milwaukee Cordless Fuel Impact
MN 2767-20, 1/2'' square ring, 18V, 5.0 amp battery, no charger, good condition

105
Milwaukee Cordless Fuel Impact
MN 2763-20, 18V, square ring 1/2'' drive, 2 pc. 5.0 amp batteries, charger, good condition

106
Dewalt Reciprocating Saw
MN DW304P, some new blades

107
Encore Steel Strapping and Crimper
MN EP-1425 (tensioner), MN E1850-01-A (crimper), NEW!

107A
FSI Jett Tally (Handheld)
hydrus chain tally, includes charger and computer

107B
Honeywell Lumber and Log Tally (Handheld)
MN 99EXLO, includes charger and computer cable

107C
40'' Grading Sticks
2 pc., New!

107D
36'' Grading Sticks
3 pc., New!

107E
42'' Lumber Marker , 32'' Tree Scale Stick, 36'' Grading Stick
(Used)

108
Ridgid 14'' Metal Chop Saw
3 extra blades, good condition

109
Lincoln Cordless Grease Gun
MN 1880 power luber, includes 2 batteries and charger, good condition

109A
Lincoln Cordless Grease Gun
MN 1880 power luber, includes 2 batteries and charger, good condition

109B
Lincoln Cordless Grease Gun
MN 1880 power luber, includes 2 batteries and charger, good condition

109C
Lincoln Cordless Grease Gun
MN 1880 power luber, includes 2 batteries and charger, good condition

110
Husqvarna Chain Saw
MN 576 x P, X-Torq, 24'' bar, wooden box with lid, good condition

110A
Husqvarna Chain Saw
MN 372 x P, X-Torq, 20'' bar, good condition

110B
Husqvarna Chain Saw
MN 572 x P, 19'' bar, good condition

110C
Husqvarna Chain Saw
MN 576 x P, 19'' bar, good condition

111
HMC Debarker
4' x 7' operator cab with controls,10 HP electric on hydraulic, 40 HP electric motor on head, cable and pulley head carrier, MN V206HST, SN 352-86, 3'' x 24'' bull wheels, 13' bull wheel length, barn sweep connected to debarker, bull wheel bearings show some wear, control box (no wiring), air kick off, hydraulic barrel with pump

112
3 Strand Log Deck
10' x 18', Tulsa gear box, hydraulic drive, stop and load

113
HMC 4-Head Block Carriage
16' x 6', air dogs and kickers, tongue dog, bottom cant kickers, electric, set works, 5 axle, 10'' wheels, panaraph arm, MN AC40BD, SN 530-93, controls in cab, 1st Lot of an Entirety

114
HMC Carriage Drive and Feed
50 HP electric motor, 5/8'' cable, 20'' idler pulley, control valve in cab, MN HD-40, SN 460-93, good condition

115
Track and Feed
45'' center to center, 50', 22'' high, welded on I beam in floor

116
HMC Husk
56'' husk, 7' 6'' x 5', 30'' top saw, 20'' x 5' 6'' off bear belt, 16'' belt, 30 HP electric motor on top saw

117
Lincoln Electric Motor
125 HP, 445T frame, 1,185 RPM, starter control box, no wiring, SN 1981760

118
HMC Saw Cab
4' x4' x 6' high, A/C and heater, camera screen, extra seat

119
HMC Entirety
Lots #113-118 with a 10% raise

119A
HMC Carriage Drive
includes drum and cable, 50HP electric motor on drive pump, Hydraulic drive motor has been swapped out, needs repaired.

120
HMC Log Turner
46'' hydraulic drive, extra chain, control valve in cab

120A
HMC Hydraulic Pack
15 HP electric motor, no hydraulic lines

121
4 Strand Log Deck
11' 6'' X 20', 4' nose skids, Tulsa gear box, hydraulic drive, no control valve, cut off saw

122
Blower
15 HP electric motor, 24'' blower, 10'' inlet, 8'' outlet, includes 10'' pipe to saw

123
Mellot Rollcase and Pop-up Deck
32'' x 22', 6 1/2'' x 24'' rolls, 24'' roll spacing, electric drive, board stop switch, pop-up transfer deck with foot switch, 4 strand, 12' x 6 1/2'', extra chain, electric drive

124
Mellot Rollcase
36'' x 12', 6 1/2'' x 24'' rolls, 24'' spacing, no power, no drive

125
4 Strand Transfer Deck
10' x 9', foot switch, electric drive, pop up, board stop, breaker box, roof top style chain H78

126
Reckart Edger
2 moving saws, 3 stationary saws, 6'' x 42'' capacity, 4' x 9' infeed table, 21'' saw blades, 50 horse electric motor, SN 134, Size R612, 3 laser lights, side press bars, hydraulic cylinder, 4' x 9' outfeed belt, 10 HP electric hydraulic pack

126A
Laser Lite*
Model L-30-R W/mounting arm  [Rebuilt]

126B
Laser Lite*
Model #L-20-R    [Rebuilt]

126C
Laser Lite*
Model #L-10-R     [Rebuilt]

126D
Laser Lite W/Mounting Bracket*
Model# L-30-R    [Rebuilt]

127
Saw Dust Transfer Belt
17'' x 10', electric drive, air cylinder

128
Blower
24'' blower, 10'' inlet, 8'' outlet, 15 HP electric motor, includes 10'' pipe to edger

129
Transfer Belt
16'' x 26' with electric drive

130
Side Transfer Belt
16'' x 7' with electric drive

131
Precision Chipper 1st Lot of an Entirety
# C-2189, chipper size 48-11, 3 knives, 100 horse electric motor, includes pipe to cyclone, includes set of New bolts

132
Shaker Screen
5 x 5, # S-1667, includes 4' cyclone

133
Chip Blower
E-36KW, #108254, dual loading chutes, Phelps, 20 horse electric motor

134
Fines Blower
24'' blower with 10'' inlet, 8'' outlet, includes 10'' pipe to blower, 15 horse electric motor

135
Entirety 131-134
Precision Chip pack, with a 10% raise

136
Vibrating Conveyor
Mellot, 25'' overall width, 6' x 10' slide pan, 18 1/2'' pan, 4'' sides, 21' with chipper adapter, electric drive

137
Rollcase
28'' x 21', 5 1/2'' x 20'' rolls, switch blade for pop up transfer, some spiral rolls, electric drive

138
4 Strand Transfer Deck
12' wide x 19' long, hydraulc drive, includes control box, 4 strand pop up transfer (6' 6''), electric drive, pop up rolls for cant transfer, includes control box, 20'' x 16', 6 1/2'' x 12'' rolls

138A
Hydraulic Pack
5 horse electric

139
4 Strand Transfer Deck
10' x 22', roof top chain, 4' slant deck for side loading, electric drive

140
*4 Strand Green Chain (Reckart)
10' x 6'' x 45', elelctric drive

141
Mellot Transfer Belt
27'' x 53', 28' flat, 25' on incline, elecrtic drive, 23'' pan, 22'' belt

141A
Skate Rolls
18'' x 10', 2 1/2'' rolls

142
Transfer Belt
electric drive, 24'' x 13'

143
Brewco Big Band Grade Resaw
# BD0003, 1 3/4'' x 40'' wheels, Press downroll with air cylinder, MN E1620 (runs 2'' bands), 40 horse electric motor, computerized control center, lubricating system, 12'' x 112'' feed belt-hydraulic drive, 14'' x 16'' capacity. 1st lot of an entirety.

144
Brewco Run Around System
hydraulic drive, controlled by main control panel,includes air supply tank (2 hydraulic packs), oil cooling radiator

144A
*Reckart Blower
NOT PART OF ENTIRETY 15 HP electric motor, 24'' blower, 10'' inlet, 8'' outlet, includes 6 flex pipe to blower

144B
*Pennsaw-AM Oil
NOT PART OF ENTIRETY 5 full buckets, 2 part buckets

145
Brewco Big Band Entirety
Lots #143 - 144

146
Set of Band Saw Wheels
1 3/4'' x 40'' wheels

147
Set of Band Saw Wheels
1 3/4'' x 40'' wheels

148
Cabinet and Contents
Tools and supplies for resaw, 36'' x 24'' x 6' cabinet

149
Shelf and Contents
Hydraulic motors, New belts, includes wooden box and used belts and Tyvar plates (5 pc.), 2'' x 60'', parts and misc. for run around

150
New Saw Blades
20' x 4'' x 2'' x .005 x .740, 30 new blades, 290 used and resharpened bands

150A
Saw Blades
60 pieces used and not resharpened

150B
Saw Blades
40 pieces used and not resharpened

151
ITT Reznor Heater
electric fans, natural gas heater

152
Ingersoll Rand Air Compressor
480 3 phase MN 7100, SN NAR10203995, 15 HP electric motor, with control box, no air lines incuded

153
Hankison Air Dryer
MN DH60, # 3332-2-9808-280, 110V, 60 SCFM at 100 PSIG

154
Ingersoll Rand Air Compressor (New in 2020)
480 3 phase MN 7100, # NAR10617246, 15 HP electric motror, 120 gallon tank, with electric cut out, no air lines included

155
Ingersoll Rand Air Compressor
480 3 phase MN 7100, NAR10203940, 120 gallon tank, with electric cut out, no air lines included

155A
Gardener Denver Air Dryer
SN 1000002964412, MN DGHB-115, single phase 110 plug in, 115SCFM@100PSIG, filters for dryer, ativated alumina, Hankison Centrifugal separator MN MS400D, auto drain

155B
Air Cooling Radiator
42'' x 23'', electric motor, lines with bypass valves

156
Fans
36'' portable fan, 14'' fans on stand x 2

157
Saw Blade
F8 style, 56'' good condition

158
Saw Blade
B style, 56'', good condition

159
Saw Blade
F8 style, 56'', good condition

160
Saw Blade
B style, 56'', good condition

161
Saw Blade
F8 style, 56'', good condition

162
Saw Blade
B style, 56'', good condition

163
Saw Blade
B style, 56'', good condition

164
Saw Blade
B style, 56'', good condition

165
Saw Blade
B style, 56'', good condition

166
Saw Blade
B style, 56'', broken shoulder

167
3 Saw Blades
56'', damaged

168
4 Lumber Carts
42'' x 6', steel wheels and 38'' posts, 2 x 2 tubing frame

168A
3 Lumber Carts
42'' x 6', steel wheels and 38'' posts, 2 x 2 tubing frame

169
4 Lumber Carts
2'' x 2'' tubing, 42'' x 6', steel wheels

169A
3 Lumber Carts
2'' x 2'' tubing, 42'' x 6', steel wheels

169B
3 Lumber Carts
2'' x 2'' tubing, 42'' x 6', steel wheels

169C
3 Lumber Carts
2'' x 2'' tubing, 42'' x 6', steel wheels

170
Quad Release Ice Melt
13, 50 lb. bags

171
2 Fans
24'' floor stand, 28'' floor stand

172
6 Fans
in green chain building

172A
24'' Fan
electric, mounted on wall mount, swing arm

173
Cable and Pulley System
cable and pulley system for cord carrier, 2- 50' cords

173A
Water Tank and Pressure System
250 gallon water tank with pressure pump, includes pipe line along greenchain walls, was used to spray lumber stain control.

174
Lights
plug in lights, 2 pc.

175
6'' PVC Pipe
all 6'' pipe going to dust bin, approx. 300'

176
Cox Reels Air Hose Reel
retracting 1/2'' hose

177
Tool Lot
Brooms, shovels, mite, cant hooks

178
Tool Lot
Brooms, shovels, scraper, cant hooks, fork ax

179
Tool Lot
Brooms, shovels, fork , hoe

180
Tool Lot
Brooms, bars, fork, shovel

181
Tool Lot
Brooms, shovels, rakes

182
Banding Tools
6 tighteners, 6 crimpers, 3/4'' clips

183
3/4'' Banding
3 New rolls

184
Banding Cart with Roll of 3/4'' Steel Banding
1 1/2 gallon pump sprayer, gas cans

185
Chains
1 pc. 3/8'' x 20' with hooks, 1 pc. 1/4'' x 20' with hooks

186
Lumber Cart, Lights, Polyboard, and Banding Cart
lumber cart with 4 posts, 44'' inside, 6' long, 1 pc. 1/8'' x 4' x 8' poly board, 1 pc. 1/8'' x 24'' x 70'' poly board, 2 flourescent lights, 2' x 4', tarp, banding cart with 3/4'' steel banding

187
Parts for HMC Carriage
Air cylinders, New bearings, lots of misc. parts

188
Saw Sharpener Shanks and Teeth
2 hanchet Jockey grinders, (1 like New), some new and used saw shanks and teeth, laser lites, saw wrenches, New grinding stones, Jockey grinder for parts, MN 06H

189
Roller Chains
lots of used chains, 4 boxes of New RS60RIV

190
Belts and Sprockets
Skid of used belts and sprockets, sledge, shovels and broom

191
Capacitor Bank
in close to new condition.

191A
Office Desk and File Cabinets
knee hole desk, 2-2 drawer file cabinets, 20'' x 48'' desk
LOT UPDATE; knee hole desk was removed and 2pc file cabinet added.
1pc 15''x35''x5' w/4drawers
1pc 14''x18''x44'' w/3drawers including first aid supplys

191B
File Cabinets*
2pc 15''x35''x5'     good condition 

192
Office Chair and Aluminum Ladder
20' aluminum extension ladder, 8' wooden step ladder

193
Shop Vac
10 gallon

194
General Electric Motor
40 HP, frame 364TS, 1180 RPM

194B
#5 Soft start
good condition

195
Lincoln Electric Motor
150 HP, Frame 444T, 1780 RPM

196
2 Electric Motors
Baldor 40 HP, 324T frame, 1780 RPM, General Electric 30 HP, 256T frame, 1755 RPM

197
Used Belting and Cable
used cable, skid of used belting, various sizes

198
15 HP Electric Hydraulic Pack Mac Neil
50 gallon tank, SN 19589100, MN K11596

199
Cat Claw Band Sharpener and Setters
looks complete, 2 Cat Claw hand setters, extra parts

200
Automatic Band Saw Setter
made in the US, electric drive

201
Steel Scrap Pile
on side of building, 55 gallon barrels full of steel

202
New Steel
2 pc. 2'' x 4'' x 24' square tube, 5 pc. 2'' x 2'' x 20' angle, 1 pc. 2'' x2'' x 6'' x 18' c-channel, 1 pc. 1 1/4'' x 1 1/4'' x 3'' x 20' c-channel, 1 pc. 1/4'' x 4'' x 20' flat, 1 pc. 3/8'' x 4'' x 20' flat, 1 pc. 1/2'' x 1'' x 20' flat, 1 pc. 3/8'' x 2'' x 13' flat, 1 pc. 1/4'' x 1 1/2'' x 2 1/2'' x 20' angle

203
New Steel
1 pc. 2'' x 4'' x 11' square tube, 1 pc. 3/8'' x 4'' x 6'' x 10' square tube, 1 pc. 1/4'' x 6 1/2'' x 6' pipe, 1 pc. 1/4'' x 6 1/2'' x 7' pipe, 1 pc. 1/4'' x 6'' x 6'' x 11' square tube, misc.smaller pieces, 3/8'' x 5'' x 8'' x 9' I beam

204
Treated 6'' x 6'' Posts
2 pc. 6'' x 6'' x 14', 1 pc. 4'' x 4''x 9'

205
Loader Forks
6'' wide

206
Ingersol Rand Air Compressor and Dryer
SN NAR10203440, MN 7100, 15 HP, electric, 120 gallon tank

207
Air Compressor
10HP, electric, 80 gallon tank

208
Michigan Knife Grinder
SN 1163, MN 48, chipper knife grinder, holds 4 knives,size 48, new parts

209
Chipper Knives
lots of used knives, bolts and parts, 3 pc. NEW 14 3/4'' counter knives, 6 pc. New 4'' x 14 3/4'' knives

210
Babbit Melting Pots and Knife Jig
3 hand held melting pots (electric), 1 knife jig, tools

211
Shelf and Cabinet with Parts
5 drawer cabinet with parts, snap rings and o-rings, shelf with parts, electrical parts, 2 pc. Ingersol Rand 1/2''-20V cordless impact (broken) dri Micro meter

212
Barrel Top Parts Washer
can fluid

213
Central Machine Metal Cutting Band Saw
1/2'' band, 4'' x 6'' capacity

214
Delta Rockwell Drill Press
8'' stroke, 1/2'' chuck

215
Bench Top Grinder
6'', mounted on pedestal

216
Steel Workbench 5'' Vise
clamps, open end wrenches, bench grinder with wire brush, all tools and parts on workbench, 28'' x 9' with 3/8'' top

217
Shelf with Welding Supplies
welding helmets, jackets, and rods, 36'' x 16'' x 7', electric motor, misc. parts

218
Shelf with Parts
used cutting blades, sprockets, paint, bearings, 36'' x 16'' x 7', all contents on shelf

218A
Dewalt Hammer Drill
corded, good condition

219
Snap-on Tool chest with Tools
31'' x 15'' x 28'', loaded with tools, including snap-on, Milwaukee cordless ratchet, sockets, screwdrivers, mallets

219A
Craftsman Tool Chest with Tools
Craftsman and Jobsmart tools, 20 1/2'' x 8 1/2'' x 14''

219B
Cresent Socket Set and Jobsmart Sockets
Cresent sockets (open end wrenches), Jobsmart sockets 3/4'' drive, 8 pc. 1''-1 1/2'', pry bars, hammer, brush

219C
Tap And Die Set*
good condition

219D
Orange Tree Marking paint*
16 cans spray paint

220
File Cabinet with Parts
4 drawer, all contents, seals, hydraulic fittings

221
Bolt Bin and Cabinets
3 cabinets with parts, 35'' x 12'' x 42'' bolt bin with all contents, bolts, nuts, and washers

222
U Punch Time Clock with Card Holder and Cards

223
Anchor Seal Spray Pump and Nozzzle
electric motor, pump with hose and wand, 1/4 barrel with Anchor seal

224
Barrel Hydraulic Oil
55 gallon AW46 hydraulic oil

225
Lots of Tools, Cresent Wrenches and Screwdrivers
6 adjustable wrenches, screwdriver set, level, square

226
Wrench Set
open end wrenches, 3/8''-2'', 50 pc.

227
Shelf with Parts
36'' x 15'' x 7', microwave, coffee pot, griddle, stereo, all parts on shelf

228
Chainsaw Parts
36'' x 15'' x 7', 2 new 20'' bars, punches, all parts on shelf and bars and chain on wall

229
Bosch CS10 Saw
working saw that is being used

229A
Bosch CS10 Saw
working saw that is being used

229B
Bosch CS10 Saw
working saw that is being used

246

229C
Bosch CS10 Saw
working saw that is being used

229D
Bosch CS10 Saw
working saw that is being used

230
Ridgid Pipe Wrenches, Pry Bars, Sledge
Ridgid 48'' aluminum pipe wrench, 2 pc. Ridgid 18'' steel pipe wrench, Murry 24'' aluminum chain type wrench, 2 pc. pry bars, 8 pc. sledge with fiberglass handle

231
Chain Saw, Chaps, Hard Hats, Skid of Parts
1 pc. Husqvarna chaps and hard hat, 1 pc. Stihl chaps and hard hat, pressure washer wands, 2 chairs, misc. parts

231A
Premier Mold Control
1 1/2 containers full

232
Husqvarna Trimmer with Blade Attachment
MN 1296K, string, good condition

233
Echo Blower & Hand Pruner Saw
MN PB-520, good condition

234
Dewalt 7'' Angle Grinder
MN DW840, good condition

235
Dewalt 4 1/2'' Angle Grinder
MN DWE402, with wire brush, good condition

236
Milwaukee 4 1/2'' Angle Grinder
# 6142-30, good condition

237
GP 1'' Air Impack 3/4'' Drill
with socket, Black and Decker 3/4'' drill (reversing), electric

238
Tool Lot
Handyman jack, 8 lb. Sledge with fiberglass handle, 2 pry bars, blue point 3/4'' ratchet handle 42'', 1'' ratchet handle 36''

239
New MIP Tensioner and Crimper
MN MIP-1300, crimp tool MN MIP 1152-34

240
Encore Steel Strapping Tensioner
NEW!

241
Misc skid
battery grease guns for parts, 3 Lithium batteries for Lincoln grease gun (works), Scotts cordless leaf blower, broom and shovel, 4'-8' fluorescent bulbs

242
Toro Pro Grind 2000 Tub Grinder
MN 2000, SN 867341KBL, knuckleboom with wide grapple, meter reads 594 hours, Cummins engine (rebuilt), 24' folding discharge belt, mounted on trailer with stabilizer arms, good running condition, extra screens and teeth

243
Komatsu WA200 Wheel Loader
MN WA200-7, SN 80740, PIN # KMTWA126KEA080740, NEW TIRES! pin on forks with clamp, meter reads 14,180 hours, Komatsu engine SN 144057 and MN SAA4D107E-2, heat and A/C. new tires, radio, pilot joystick controls, 1 owner machine in good running condition

244
Komatsu WA200PZ Wheel Loader
MN WA200PZ-6, SN 71757, PIN # KMTWA105H01071757, quick attach fork system, Komatsu engine SN 35042244 and MN SAA4D107E-1, meter reads 6,101 hours, pilot joystick controls and 3rd valve, heat and A/C, radio, tire tread 30 to 50%, 1 owner machine, in good running condition

244A
Forks Quick Attach JRB
6'' x 48'' forks with clamp

244B
Slip On Sawdust Bucket
8' x 4' x 4'

245
Komatsu WA200PZ Wheel Loader
SN 71835, MN WA200PZ-6, PIN KMTWA105U01071835, quick attach system, Komatsu engine SN 26586370 and MN SAA4D107E-1, meter reads 9,025 hours, pilot joystick controls and 3rd valve, heat and A/C, radio, tire tread 30 to 50%, 1 owner, good clean machine

245A
Forks Quick Attach with Clamp
JRB, 6'' x 48'' forks, fits Komatsu loaders

245B
Slip On Sawdust Bucket
8' x 4' x 4', 42'' between fork holes

247
*Volvo Wheel Loader
RESERVE FOR 10 DAYS FOR LOADOUT, MN L50E, VIN L50EV71628, 100 HP, 21,252 hours, year 2007, Rebuilt engine model D4DLAE2, quick attach system, 6'' x 42'' forks with clamp, 24V system, heat and A/C, 3 lever boom controls, good tight machine that runs well

247A
Slip On Sawdust Bucket Loader
76'' x 46'' x 48''

248
Allis Chalmers Forklift
RESERVE FOR 10 DAYS FOR LOADOUT, MN FPL50-24, SN 46791000, 5,161 hours, propane engine, 4''x 53'' forks with side shift, 82'' 2 stage mast, brakes need to be worked on, runs and operates, rough condition

249
Kubota Track Hoe KX057-4
MN KX057-4, VIN KBCK0574KK3031122, 419 hours, year 2019, engine 8KE2845, rubber tracks, 24'' bucket with clamp, 6.5 float angle blade, pilot joystick controls, cab has heat, A/C,and radio, includes 4' bucket, quick pin on, low hours, is in excellent almost new condition

250
*JLG Scissor Lift
2005 MN 1930ES, 387 hours, electric scissor lift, new batteries in 2021, 23 x 100 solid tires, good condition

251
Oshkosh Truck with Prentice 210 Knuckleboom Loader
has title, MN C-1834, SN 9056, Fuller transmission with 3 speed aux., Detroit 671 Engine, 6 wheel drive, 10 speed, completely rebuilt, meter reads 113,141 miles, Prentice 210 knuckleboom, SN 210P20875, MN D-210, Detroit 353 rebuilt engine, hydraulics have been rebuilt, lever controls

252
*Hood 28000 Knuckleboom Loader
 MN 28000, SN 287184, approx. 10,000 hrs. new transfer pump, remote hydraulic hook up for slasher saw, 34' boom, mounted on a Pitts trailer, cab has heat, A/C, radio, and joystick controls, front glass has a crack, continues rotating grapple, John Deere Powertech 6.8 engine, Eberspacher system, good tires, very good condition

253
*Prentice 210D Knuckleboom Loader
MN D210D, SN 210P26845, 9,888 hours, has hydraulics for buck saw, Cummins engine,  trailer mounted, joystick controls, foot pedal swing, continuous grapple, good wheels and tires, runs and operates good.

254
*2007 Kenworth T800 with Knuckleboom Loader
New Trunion suspension in 2020, Has a 2017 Serco 1050XR knuckleboom loader, 525 HP Cat, 18 speed, year 2007, full locking rear ends, rebuilt engine at 576,245 hours, has rear mount

255
2004 Peterbilt 379 with 2016 Serco 1050XR Loader
Black log truck with front mount loader, 550 HP Cat engine, 18 speed, year 2005, full locking rear ends, new tag axle, new shocks all around, new springs on drive axles, new torque arms, engine rebuilt December 2019 by Kenworth of Youngstown, transmission rebuilt in January 2020 by Transgear of Hubbard, around 100,000 miles on both rebuilds

256
2002 Freightliner FLD120 Truck
2002 Freightliner
Model: FLD120
Mileage:812,334
Drive Line: 6x4
Engine Type: 12.7 Detroit
Fuel Type: Diesel
Horsepower:500
Transmission:10 speed Eaton Fuller
VIN #: 1FUJAHCG42PK16607

Features and Notes: Detroit 60 series engine, wet line

257
*2005 Kenworth W900 Truck
2005 Kenworth
Model: W900
Mileage:402,827, since Platinum rebuild by OH Cat, 1,402,827 total miles
Drive Line: 6x4
Engine Type: L6, 14.6L (893 CID)
Fuel Type: Diesel
Horsepower:475 Cat
Transmission: 10 speed
VIN #: 1XKWDB9X45J070441

Features and Notes: MN W900, engine MN C15475 with twin turbo, aluminum wheels, good tires, wet line, New hydraulic pump, rebuilt transmision, clutch & fly wheel less then 100K miles ago.  good condition

258
2002 International 9200i Truck
2002 International
Model: 9200i
Vehicle Type: Truck
Mileage:391,761
Drive Line: 6x4
Engine Type: L6, 14.0L (855 CID) N14 Cummins
Fuel Type: Diesel
Horsepower:525
Transmission:10 speed Eaton Fuller
VIN #: 2HSCEAERX2C032422

Features and Notes: MN 9200I6X4, flat top sleeper

259
1999 International 9400 Truck
1999 International
Model: 9400
Mileage:691,906
Drive Line: 6x4
Engine Type:N14 Cummins
Fuel Type: Diesel
Horsepower:525
Transmission: 10 speed Eaton Fuller
VIN #: 2HSFHAER4XC091249

Features and Notes: MN 94006X4, wet line, engine rebuilt in August of 2022, rebuild done in-house, New turbo and air to air, raised sleeper

260
2014 Freightliner Cascadia 125
460 HP Cummins ISX engine, 687,782 miles, year 2014, 10 speed Eaton Fuller transmission, good drive tires, aluminum tires, very good condition

261
*2004 Mack CX613 Vision Truck
2004 Mack
Model: CX613 Vision
Mileage: 706,710
Engine Type: Mack L6, 12.0L (728 CID)
Fuel Type: Diesel
Horsepower:460
Transmission: 13 speed Maxitrque
VIN #: 1M2AE07Y14N020814

Features and Notes: MN CX613, Silver Bulldog, Mack engine, wet line, full locking rear ends, aluminum wheels, good tires, very good condition

262
1998 Peterbilt 379 Truck
1998 Peterbilt
Model: 379
Mileage: 234,793
Drive Line: 6x4
Engine Type:11.1 Detroit
Fuel Type: Diesel
Horsepower: 430 
Transmission: 9 speed Eaton Fuller
VIN #: 1XP5DR9X8WD454978

Features and Notes: 379 Detroit 60 series engine, full locking rear ends, aluminum wheels with good tires, very good condition

263
BMY Military 6 x 6 Truck
Has title, 1990, meter reads 25,930 miles, VIN 31/00549, Cummins engine SN 44386672, 5 speed, 5 ton rating, runs good

264
2013 Chevrolet Silverado Pickup Truck
2013 Chevrolet Silverado
Mileage: 114,804
Body Type: 4 Door Cab; Extended
Trim Level: LT
Drive Line: 4WD
Engine Type: V8, 5.3L; FFV
Fuel Type: Gasoline/E85
VIN #: 1GCRKSE77DZ234222

Features and Notes: MN 10753, crew cab, 5.3 Vortec engine, very good condition

265
Liberty Jeep
year 2006 ,4x4, Sunroof,folddown rear seat,meter reads 182,960 mi.
vin#1J4GL58K26W237937
3.7L engine
Runs and drives good
 

265A
Kenworth Parts Truck
VIN 1XKDDB9X35J641811, year 1995, no hood, engine, or transmission

265B
Kenworth Fiberglass Hood
Fiberglass

265C
Kenworth Parts Truck
no engine or transmission

265D
* Freightliner Parts Truck with Super Cab
no engine or transmission, no title

265E
International Hood
Fiberglass

265F
Rubber Tracks
off of forwarder, 28'' wide, 2 pieces

265H
Poly Tank
1,500 gallon, 8' diameter, 5' 6'' high

265G
Parts Frame

265I
Side Step with Tool Box

265J
Hydraulic Tank Truck Mount
22'' x 14' x 42''    New tank for Serco knuckleboom trucks.

265K
Truck Fuel tank and Mount
aluminum

265L
Scrap Pile

265M
Galvanized Sink
26'' x 89''

265N
Truck Head Board with Built In Hydraulic Tank
84'' x 62'' x4'' tubing

266
2019 Kaufman DT35 Lowboy Trailer
MN DT35, VIN 1K9FR3622KB36754, low hours, year 2019, GX390 Honda Engine on hydraulics, 102'' x 24' deck plus 12' over wheels, 14'' swing outs on each side for a wide load, tool box with 6 ratcheting boomers and chains, aluminum wheels, good tires, very good condition

267
2021 Pitts LT42 Log Trailer
MN Load paying series, VIN 5JYLT4027JPP07068, year 2021, 42', 6 bunks 101''X7' high, steel wheels with good tires, 1' extended bumper, mounted tie down straps, almost new condition

268
Pitts Log Trailer
MN LT42, VIN 5JYLT4228MPP21269, year 2018, 42', 6 bunks, 101'' wide, steel wheels with good tires, mounted tie down straps, very good condition

269
Pitts LT42 Log Trailer
VIN 1PELT4228TP960678, year 1996, 6 bunks, 8' x 7' high, 44' long, steel wheels and good tires, mounted tie down straps, good condition

270
Pitts LT40 Log Trailer
VIN PE9LT40T3KP960235, year 1989, 6 bunks 8' x 7' high, steel wheels with good tires, 42' long, mounted tie down straps, good condition

271
Rebel Trailer
VIN 1R41Y02C7CM000418, year 1983, 42', 8' x 7' high bunks, 6 bunks, steel wheels with good tires, mounted tie down straps, good condition

272
Reitnouer Maximiser Trailer
VIN 1RNF48A27FR034189, year 2015, aluminum flatbed trailer, 90,000 lb. capacity, 102'' x 48', aluminum wheels, tie down straps mounted on rail, very good condition

273
Peerless Walking Floor Trailer
2013, 45' open top w-good tarp system, very good condition, two extra new swinging doors. 46'' x 90'', go with Peerless trailer, VERY NICE!

274
Peerless CTS Trailer Walking Floor
VIN 1P1E04221TPA20851, year 1996, walking floor chip trailer is 8' x 8' x 42', just replaced shoes & parts of the floor that needed it, new suspension 5 years ago, steel wheels with good tires, good condition

275
Budd Chip Trailer 1979
VIN 178523E, 8' x 42', has just been inspected and is OK, good condition

276
Budd Chip Trailer 1979
VIN 167893, 8' x 42', has just been inspected and is OK, good condition

277
Budd Chip Trailer 1979
VIN 178557E, 8' x 42', has just been inspected and is OK, good condition

278
Fruehauf Chip Trailer 1977
VIN HPY583113, 8' x 40', just inspected and is OK, good condition

278A
Aluminum Utility Trailer
65'' x 120'' inside, 4' tail gate, manufactured by: Carry On Trailer Corp., wood floor

279
Fuel Tank with Metered Pump
electric pump, 38'' x 60'' on skids

279A
Fuel Tank with Hand Pump
48'' x 70'' on skids

280
Debarker Parts
New V belts, gear box, and joystick control handle, new head bearings, all parts on pallet

281
Edger Parts
feed roll with some new inserts, gear box, bearings, 19 blades 21'', all parts on pallet

282
Cart Wheels and Parts
All parts on skid, hydrauliic pump and cylinders, 7 pc. 2'' x 8'' cast wheels with bearings

283
Tire Chains
2 pc. For semi tractor dual wheels

284
Belt Guards
all items on skid

285
Bolts and Nuts
misc. bolts and nuts, all items on skid

286
Rollcase Parts
Air cylinders, 24'' portable fan, 6 1/2'' x 24'' rolls with sprockets, deck chain, all parts on pallet

287
Dyna-Glo Deluxe Space Heater
Diesel or kerosene, portable, 50,000 BTU, good condition

287A
Dyna-Glo Deluxe Space Heater
Diesel or kerosene, portable, 50,000 BTU, good condition

287B
Dyna-Glo Deluxe Space Heater
Diesel or kerosene, portable, 50,000 BTU, good condition

287C
Dyna-Glo Deluxe Space Heater
Diesel or kerosene, portable, 50,000 BTU, good condition

287D
Dyna-Glo Deluxe Space Heater
Diesel or kerosene, portable, 50,000 BTU, good condition

288
Remington Space Heaters
80,000 BTU 1 pc., 45,000 BTU 1 pc., 125 propane 1 pc., good condition

288A
Remington Space Heaters
80,000 BTU 1 pc., 45,000 BTU 1 pc., 125 propane 1 pc., good condition

288B
Remington Space Heaters
80,000 BTU 1 pc., 45,000 BTU 1 pc., 125 propane 1 pc., good condition

289
Munsters Sial Space Heaters
40,000 BTU, 3 pc., good condition

290
Space Heaters
2 pc. Masters 75,000 and 135,000, 1 pc. Dura Heat 50,000 BTU

291
Loader Tire Chains
4 pc.

292
Wheelbarrow and Electric Cords

293
Wheelbarrow Loaded with Tools and Parts
ax, air hose, grease guns, tool box, misc. parts

294
Wheelbarrow Loaded with Air Hoses

295
Wheelbarrow Loaded with Tools
wrench sets, socket sets, 125' steel fish tape, grease gun, hard hat, first aid kit, lots of misc. tools

296
Wheelbarrow Loaded with Tools
Fillrite fuel pump with meter, torch, 20 ton hydraulic jack, 2 smaller hydraulic jacks, lots of misc. tools

297
Skid of Supplies
New 24'' Work Station fan, 5 pc. Propane tanks (empty), filters for Komatsu, battery tester,jumper cable # 4 20', Diesel all additive, pump sprayer, 5 case Red # 1 multipurpose grease, washer fluid, antifreeze, WD 40, caulking, SAE 80W-90 gear oil (3 gallons),hand pump for oil on bucket

298
Chain Hoists for Misc. Chains
1 ton chain hoist 1/4'' cable, 1/2 ton chain hoist 1/2'' cable, misc. chains and binders, all parts on skid

299
Saws for Parts
9 pc. Bosch skill saws, 2 pc. Chain saws for parts, oil pump, all items on skid

299A
Socket Set
7/8''- 2'' complete set with 3/4'' drive wrench

299B
Dewalt Grinder
with 46 cutting wheels

300
Motor Oil
6 galons Kawasaki bar and chain oil, 18 pc. 2 stroke oil mixes (5 gallons), 1 1/2 buckets Power Drive fluid 10W for Kommatsu, 1/4 bucket air tool oil, 1/2 bucket 75W-90 oil, propane heater, hand sprayers, misc. oils

301
Log Savers Systems (Skid of Parts)
plastic and metal log saver clips, hammer for clips, Latsch Bacher 4484 Tagging System with hammer and tag dispenser, box of tags, 30 ton hydraulic jack, 2 buckets with tools and parts, Lincoln battery and charger, Propane tank with 2 flame torches

302
Anchor Seal Spray Pump (Skid of Supplies)
Electric sray pump, gas cans, Sunbrite cleaner, hand pump, Dry-o-lite Gas Dry Prime, all parts on skid

303
Skid of Parts
Electrical fuses, roll of plastic sheeting, all parts on skid

303A
Conveyor Belt Fasteners
with alligator tool press

304
Milwaukee Cordless Grease Gun (Items on Skid)
30'' pipe wrench, crimp tools, leaf blower, gas cans, Husquarana 455 Rancher chain saw, condition unknown

305
Electric Cords and Misc. Parts
Dura Heat propane space heater, electric lights and supplies

306
Hydraulic Hose and 5' Saw Bar
all hose on skid

306A
Pacific Hydrostar Water Pump
212CC predator, gas engine with 3'' hose

306B
80,000 BTU Gas Heater
80,000 BTU, 1 hour, heats up to 2,000 square feet,hangs from cieling. Brand new and in the box!

307
Hand Tools
shovels, scraper, cant hooks, all tools on skid

308
Parts and Fittings
Pintle hitch, all parts on skid

309
Electric Heaters
2 pc. 14'' x 21'' heat mat, 1 new heater, 3 used heaters, box fan, Milwaukee cordless drill and driver, chaps, heat bulbs, Power House pressure washer

310
8 Chairs

311
Loader Parts and Skid of Misc. Parts

312
Skid of Hoses
Hydraulic and water hoses, all parts on skid

313
Werner 8' Fiberglass Step Ladder
good condition

314
Werner 6' Fiberglass Step Ladder
good condition

315
Werner 6' Aluminum Step Ladder
good condition

316
Tub Grinder Parts and Hydraulic Oil
3/4 barrel hydraulic oil 46, all parts on shelf

317
Anchor Seal Sprayer System with Honda Gas Motor
Honda GX120 motor, sprayer hose and wand, 3 empty barrels

318
Lockable Storage Cabinet and Tarps and Hoses
Built with 1/4'' steel, 27'' x 27'' x 6', water hoses, 2 pc. Tarps

319
Hand Pumps Broom
work sign, pipe clamp, rake

320
Garden Hose Reel
Shop built on cart fixed for drill power, holds 300' hose, cleaning tub, shop vac

321
Simpson Pressure Washer
Honda GC190 gas motor, hose and wand, good condition

322
Napa 200A Battery Charger and Starter
200A engine start, 60A boost charge, 2A charge, good condition

323
Napa 200A Battery Charger and Starter
200A engine start, 40A boost charge, 6-2A charge, good condition

324
Pro Series Battery Charger
250A engine start 12V, 150A engine start 24V, 150A engine start 6V, good condition

325
Lincoln Ideal Arc Welder 250`
220-480V, MN 250-250, SN 177714, on cart

326
Lincoln AC225 Arc Welder
MN AC225, with extention cord, on cart

327
Western Accu-Flame Cutting Torch
with hose and gauges, tanks on cart

327A
Airco 36'' Cutting Torch (Head Only)

500

327B
Hand Carts
1 pc. 24'' wide with 12'' air tires, 1 pc. 14'' wide with 7'' solid tires

328
Traffic Cones Control Box
3 pc. cones 18'', 4 pc. cones 36''

329
Slip On Tow Motor Forks
5'' x 42'' forks, could be used as quick attach forks

330
Slip On Boom with 2 Attachments
12' boom

331
Steel Plate with Chain
3/8'' x 4' x 8'

331A
*Whit Oak Planks
Approx. 672 board feet of 2''X randem width X 12' 

332
Slip On Loader Bucket
7' x 4' x 4' with slant sides

333
Stacking Rack
76'' x 43'' x 38'''

334
Slip On Loader Bucket
8' x 4' x 4' with slant sides

335
Slip On Scraper
12' x 30'' with 2' sides

336
Bucket fits Kubota Mini Hoe,
4' x 30'' x 30''

337
Skate Rolls
2 1/2'' rolls, 18'' x 10'

338
Used Loader Tires
20.5 R25

339
Loader Dirt Bucket
8' x 40''

340
Slip On Loader Dirt Bucket
92'' x 40''   

341
High Dump Slip On Bucket
3 1/2 yd., 8' x 4' x 4', 

342
Shaft with Sprockets and Bearings
2 pc., 4- 19'' sprockets, 2 11/16'' shaft x 23'

343
Shaft and Bearings
1 7/16'' x 20'

344
Gear Box with Sprockets

345
Frick Track and Frame
45', 38'' C-C 

346
I Beam
3 pc., 3/8'' x 6 1/2'' x 12'' x 23'   

347
I Beam
3/8'' x 6 1/2'' x 12'' x 17' 8''  

348
I Beam
3/8'' x 5'' x 14'' x 24'  

349
I Beam
3/8'' x 8'' x 8'' x 19'  

350
I Beam
1/2'' x 8'' x 14'' x 20'  

351
Steel Sled
1 pc. 5' x 16', 1 pc. 5' x 10'

352
Bridge Steel Frame
2 pc. 6' x 20', side rails

352A
Portable Bridge UPDATED LOT
2 pc. 6' x 30', needs new wood floor, made by ADM Welding
LOT UPDATE New flooring has been added

353
Swamp Mats
12 pc. 4' x 16', 4 pc. 7' 6'' x 12'

354
Steel Pipe
2 pc. 1/2'' x 20'' x 11'

355
Steel Pipe
2 pc. 8'' x 11''

356
Steel Pipe
1 pc. 15'' x 18', 7 pc. 12'' x 7'-18'

357
CTR Circular Buck Saw
60'' saw, direct mount hydraulic motor on saw, SN 610300, hydraulic cyliinder operated, carbide inserted teeth

358
Buck Saw and Bunks
5' bar, hydraulic drive, 16' bunk

359
Belt Conveyor
18'' pan, 6'' sider, 22'' x 18', no drive

360
3 Strand Transfer
10' x 16', no drive

361
Edmiston Portable Sawmill 36'' 4HB
Fully hydraulic, chain tye turner, hydraulic dogs and tapers, 15' carriage, track 34'' C-C, 46' track and frame, 110V over hydraulic set works, panagraph, 20'' x 5' off bear belt, 24'' x 8' outfeed belt, Tong dog, on wheels, 42'' x 48'' cab

362
*Polartec Plus by Snap On Refridgerant Recharger
NOTE: ALL THE REST OF THE ITEMS ARE LOCATED IN THE TRUCK GARAGE approx. 1 1/2 mile up the road just west of the train tracks. MN Polartec Plus A, SN EC1911-259, year 2019, R134A refridgerant, recovery, recycle, recharge station, very good condition

362A
Weitron 134A Refridgerant
1 1/2 tank

363
North Star Performance Pressure Washer
Honda GX390, gas with diesel heater and electronic start, with hose and wand

364
Simpson Pressure Washer
3.5 GPM, 4,000 PSI, Honda GX270, gas, with hose and wand

365
Troy-Bilt Pressure Washer
2.7 GPM, 3,000 PSI, Honda GCV190, gas, with hose and wand

366
Simpson Pressure Washer
2.4 GPM, 3,300 PSI, Honda GC190, gas, with hose and wand

367
3 In 1 Welder
Fabricatoor 252I, mig, stick, and tig welder on metal cart, with 2 auto darkening helmets and 1 canister

368
Lincoln Electric Welder
SN K913858820, weldon power G8000 on performer 16XSL, gas engine, tig welder, meter reads 980 hours

367A
Welding Rods and Wire
4 Boxes 6011 welding rods 
1 roll .35 welding wire 
ALL NEW

369
Cutting Torch
2 tanks on metal dolly cart with gauges and torch

370
cutting Torch
2 tanks on a metal dolly cart with gauges and torch

371
Ingersoll Rand Air Compressor
with single tower van air, air dryer, 7.5 HP electric drive, 80 gallon tank, 2 stage reel not included

371A
2 Retractale Hose Reels
with air hose

372
US General tool Box
includeds all contents, 22'' x 4' x 41'', assorted sockets ranging from 7/8''-5'', 2' ratchets, wrenches, and sleeve pullers

373
US General tool Box
includes all contents, assorted wires, fuses, connector ring, shring tubing, strippers, and zip ties, 3' x 21'' x 41''

374
Parts washer
30'' x 21'' x 3', good condition

375
Kobalt Tol Box
includeds all contents, socket sets, wrenches, channel locks, chizzles, sledges, screwdrivers, 19'' x 41'' x 64'', with built in electric strip

375A
Open End Wrenches
10 mm-32 mm, 1 5/8''- 2 1/2''

377
Retractable Hose Reel

378
Lube Pump with Hose Reel
retractable hose reel with grease sert

378A
Premalube
NLGI # 2 grease, 2 unopened barrels, 1 partially used

379
2 Ton Foldine Engine Crane
SN 367821928, with 5' extended arm

380
2,000 Lb. Transmission Jack
SN 372552049, 10 1/2'' x 6 1/2'' plate

380A
Strongway Pallet Jack
4400 lb. capacity 
Good condition 

381
3 Ton Car Jack

382
Pro Series Car Jack
capacity unknown

383
Air Jack on Wheels

384
Tap and Die Set
Like New! Complete Set!

385
Blue-Point Hex Bit Socket set
87 pieces, Like New! Complete Set!

386
Snap On 1/2'' Digital Torque with Ratchet
SN 1014070486, manual included

387
Snap On Ring Pliers Set
12 pc.

388
Socket and Allen Wrench Sets
13/16''-1 1/2'' sockets, 3/4'' drive, 8mm-19mm Allen wrenches, 3/8'' -3/4'' Allen wrenches

389
Porta-Power
4 ton, 10 ton, 20 ton sets

390
Pro-Logix 12124V Battery Charger
MN PL3760, with engine start

391
Associated Battery Charger
200 amp, 12V, with engine start

392
Shop Vac
5 gallon

393
Husquarna 128LD Weed Wacker
with 2.5 gallon gas jug and partial roll of cord

394
Light Tower and Creeper Cart
commercial electric, 2 lamp light tower, and a snap on creeper cart

395
Werner Adjustable Ladder
300 lb. capacity, 21' ladder

396
Tire Working Safety Cage and Assorted Tools UPDATED LOT
pry bars, cage, sledge, bead setting blaster tank
LOT UPDATE;add wheel balancer weights 10 oz-12 oz.-16 oz.

397
2 Sledges and Pick Ax
10 lb. sledge

398
Assorted Pry Bars

399
Sunex Air Impact
1'' drive with 10'' extension

400
Ingersoll Rand Air Impact
SN A02426917, 90 PSIG, 4,000 RPM, 1'' drive with 10'' extension

401
Hydraulic Bottle Jack
Air powered 

402
Hydraulic Bottle Jack
Air powered

402A
Central Machinery 20 Ton Shop Press
SN 371951522, 26'' x 26'' x 62''

403
Hydraulic Bottle Jack
20 ton

404
Plasma Cutter and Welder
SN 189181200229, Forney easy weld, 180 A., 27V, Chicago Electric Plasma Cutter 40 A., 90V

405
Heater, Microwave, and Creeper
snap on creeper cart, 80,000 BTU Dyna Glo Deluxe kerosene/diesel heater, MN KFA80DGD

406
Milawaukee 1/2'' High Torque Impact
with charger and 5 amp. battery in case

407
Milawaukee 1/2'' High Torque Impact
with charger and 5 amp. battery in case

408
Milawaukee Impact and Drill
with 5 amp and 1.5 amp battery and charger in case

409
Milawaukee 3/8'' Impact and Ratchet
with 1.5, 3, 5 amp batteries and charger. No case.

410
Needle Scaler
4,000 BPM, comes with box, new parts, and manual

411
Ingersoll Rand 261 Series Impact
SN SR21G200312, 90 PSIG, 6,000 RPM, 3/4'' drive, good condition

412
Mini Angle Die Grinder Kit
2 mini die grinders with assorted wheels and brushes and manual, very good condition

413
Air Grinder and Ratchet
chief extended die grinder, SN 375351852, Ingersoll Rand 3/8'' drive air ratchet

414
Porter Cable Heat Gun
120V, 1,500 W

415
Storm Torque Wrench
SN 2016069771, 3/4'' drive, 100-600 FT16

416
Bosch CS10 Circular Saw
SN 903051940, corded, good condition

416A
Bosch CS10 Circular Saw
SN 706000473, corded, good condition

417
Slack Adjuster Kit
with organizer, box of wires, connectors, and zip ties

418
Centech Digital Inspection Camera
2' long camera extension

419
Bosch Oscillating Sander
SN 111005457, good condition

420
Ingersoll Rand Air Chisel

484
Master Force Drill
SN 20190101

485
Bosch RS325 Sawzall
with new metal and wood blades

486
2 Dewalt 4'' Angle Grinders

487
Dewalt 7'' Angle Grinder

488
Dewalt 7'' Angle Grinder
SN 023624

489
2-12 Ton Jack Stands
minimum height 19''

490
3-16'' Jack Stands

491
2-15'' 6 Ton Jack Stands and 2-11'' 2 Ton Jack Stands

492
Air Hoses
with funnels and 28'' zip ties, shop chair

493
Truck Seat
good condition

494
Assorted Pallet
asssorted fuel jugs, tow strap, extension cord, welder extension, air hose

495
3' Countyline Fan

496
Wooden Work Bench
with electric strip, bit sets, grinding wheels, vice grips, 2 clamps, and all contents

497
Work Bench
with table grinder and vice, all contents included

498
Assorted Pallet
Earthquake 1'' drive air impact, 3/4'' air impact, U joints, 3/4'' bolts and nuts

499
Assorted Pallet
2 refridgerant pumps, 245I HP fan alternator, 2 power take offs, tool box, and electrical starter

500
Clean Burn Heater
MN CB3250, SN 12239, 2,598 hours, used oil heater, 300,000 BTU, includes pump unit on tank

501
Oil Tank
13' x 4' tank approx. half full of used motor oil
 

502
Fuel Tank
5' x 27'' x 44''

503
Steps and Platform
6' x 4' x 2'

504
Steps and Platform
6' x 4' x 2'

505
Carted Oil Catch
2' x 3' x 10'', with hand pump for 5 gallon bucket

506
Filing Cabinet and Mini Fridge
works

507
Metal Shelf
173'' x 34'' x 151'' with contents

508
Metal Shelf
126'' x 42'' x 120'', contents not included

509
Metal Shelf
173'' x 34'' x 100''

509A
Metal Shelf
8' x 42'' x 10'

509B
Metal Shelf
76'' x 2' x 6' with tarps

510
20' Extension Ladder
20', capacity 225 lb.

511
Grease Tubes
approx. 120 multi purpose # 2 grease

512
Diesel Anti Gel
8 bottles of anti gel and 13 bottles of 80W-90 gear oil

513
Anti Freeze
11 gallons of pre-mixed anti freeze

514
Air Filters

515
Wheelbarrow with Tools
with 3 extension cords, jumper cables, 4' level

516
Assorted Pallet
3 tire chains, cutting torch

517
New Battery 12V Battery
1 pc. New battery 
925 cca.
threaded posts 

518
Interstate Battery 12v
Starting battery was installed some in 2020. 
1pc.
950 cca.
Still useable 
Threaded posts 

519
Interstate Battery 12V
Starting battery was installed some in 2020
Still useable
1pc. 
950 cca
Threaded posts.

520
Interstate 12V Battery
Starting battery was installed some in 2020
Still useable 
1pc. 
950 cca.
Threaded posts

521
12V Batteries
Starting battery
used 
650 cca.
Threaded posts
4 pieces
1 pc. 925 cca.

522
12V Batteries
Starting battery
Used 
925 cca
Threaded posts .
5 pieces
 

523
2 Boxes of New Bungy Cords
Tarp straps 

524
Assorted Pallet
open end wrenches, crimp kit, assorted chains, manual air hose reel, rope, wooden stakes, shop vac hose

525
Assorted Pallet
rubber belt, LED shop light, Lincoln grease gun, exterior light fixture, radio

526
Assorted Pallet
New chain flags, hard hats, arm rests, high vision vests

527
3 Barrel Shelves and barrels
With 3 barrels of anti freeze and 13 empty barrels 

528
Brake Shoes and drums
10 sets, 3 brake drums

529
Brake Shoes
25 sets

541
Cargo Locks
with canopy bars and mounts

530
Metal Cart
with barrels and funnels

531
2 Piece Tire Chain Set
for Volvo wheel loader, 10' x 30''

532
2 Piece Tire Chain Set
11' x 30''

533
Bolt Bin
with contents of 1/4'' -1' bolts, nuts, lock washers, flat washers

534
All hydraulic hoses on rack
Some new hoses to fit Serco knuckleboom loaders,includes allhoses on rack

535
International Tie Rod
1 pc with knuckle ends 

536
2 Peterbilt Tie rods
1 new and one used with knuckle ends

537
Peterbuilt Doors
Nice condition 

538
Semi Bumper
T800

539
Assorted Pallet
organizer bin with contents of elbows and nylon tubing, hose mounts

540
6' Steel Ramps
6' x 9''

542
Deck Plates
34'' x 24'', 19'' x 34'', 22'' x 24''

543
Semi Air Hoses

544
Protech Boxes
2'' x 3'' x 2'' with 27'' x 11'' step

545
2 Boxes and Mounts
3' x 18'' x 18'' with box mounts and 32'' x 18'' air intake

546
Assorted Pallet
paint supplies, mouse traps, buffing wheel

547
Fuel Tank and Mounts
40'' x 2' fuel tank

548
Pallet of Assorted Belts

549
4 Tire Chains

550
2 Ladders
8' ladder and 24' extension, 225 lb. capacity

551
Assorted Pallet
assorted hydraulics hoses, hydraulic motor, 12'' belt

552
Assorted Pallet
Craftsman tool box with drills, roll pins, bucksaw chain hydraulic hose and motor, assorted bolts, nuts, and washers

553
Assorted Pallet
oil filters, air filters, extension cord, tarp, and air hose

554
Pallet of Binders
Brand new web binders, tie down straps, chain binders, ratchets

554A
Strap Ratchet Handle
LOT UPDATE 
2 pc used 

554B
Strap Ratchet Handle
1pc., New!

554C
Strap Ratchet Handle
1 pc., New!

554D
Fifth Wheel Pin Pull Handle
1 pc. New

554E
Fifth Wheel Pin Pull Handle
1 pc. New

554F
Fifth Wheel Pin Pull Handle
1 pc. New

554G
1pc Ratchet Handle 1 pc Pin pull handle .Used*

554H
1pc. Ratchet Handle 1pc. Pin Pull Handle Used*

554I
1pc Ratchet Handle 1pc. Pin Pull Handle*

554J
1pc Ratchet Handle, 1pc Pin Pull*

554K
2 Ratchet Handles, 1pc Pin Pull Handle. Used*

555
Assorted Pallet
lug nuts, chrome covers, creeper cart, stud bolts

556
Assorted Pallet
steel line, gaskets, fuel filters, injectors

557
Hand Pumps and Gear Oil
unopened trans axle oil and 4 hand pumps

558
Assorted Pallet
hose clamps, radiator fans, hydraulic fittings, coolant hose

559
Chrome Exhaust Pipes

560
Assorted Pallet
springs, u-bolts, air hose, steel mounts

561
Hydraulic Pump and Brooms
Rebuilt hydraulic pump for Prentice knuckleboom loader on Osh Kosh truck,or will fit any Prentice loader 

561A
Brooms and Shovel

562
Chain
1 pc. 1/2'' x 10', 1 pc. 1/2'' x 20'

563
Misc. Chains
12 pieces

564
Assorted Pallet
parts for Serco 8500 loader, 43'' hydrulic cylinder, rubber seals, 20'' dual threaded bolts,seals fit 1050 and 8500

565
Steel Work Bench
6' x 3' x 3' with Dewalt bench grinder and a Colombian 4 1/2'' vice

566
Pipe Threading Kit
3/8''-2'' bits, threading oil and threading tool

567
Assorted Pallet
Reese tow power 1 ton hoist, cleaning supplies, 31 cans of brake cleaner

568
Truck Parts
steering wheels, mirrors, air horn, seat belts

569
Assorted Pallet
head lights, running lights, and trailer lights

570
Assorted Pallet
shocks, wheel bearings, brake adjusters

571
Assorted Pallet
air shocks, filters, hub seals, wheel seals, gaskets

572
Assorted Pallet
fans, wheel bearings, U bolts, mount brackets

573
Assorted Pallet
fire extinguishers, garden sprayers, caution reflectors, filing cabinet, trailer lights

574
Mud Flaps and Hose Clips

575
Air Suspension Mounts and Hitch Pins
Peterbilt parts

576
Truck Springs and Diesel Mate
36 bottles of diesel mate

577
Assorted Pallet
assorted lights, air suspension, water valves, fuel transfer box kit

578
Assorted Pallet
grease surts, 34'' x 4'' roller, 2 pc., 18'' x 8'' roller, hydraulic valves, electric outlets and sockets

579
Thrust Bearings
2 barrels of used anti freeze

580
Assorted Pallet
3 turbos, oil pump, steering pump

581
Assorted Parts
U joints, rubber shocks, grease caps, bearings, brake tensioners

582
Assorted Lights
trailer plugs, trailer lights, running lights, liscense plate lights, pin plugs, 2'' chrome plastics, LED lights

583
Caterpillar Head
Used head. 
2 pc. New spring leaves

584
4 Tires
P265165R18

585
Wooden Shelf
New fender mounting kits, 51'' x 28'' x 6'

586
Detroit Diesel Series 60
12.7 series 60 , 400 hp. Running good when taken out

587
W900 Front Drive Axle
 completely rebuilt, new yokes,wheel hubs 

588
Disassembled Axle
axle housing with leaf springs, fits 2001 Freightliner

589
Semi Hitch Mount
mount plate size 50'' x 39''

590
Assorted Pallet
cutting torch set, tie down straps and ratchets, manual oil pumps, 2 rolls of plastic

591
Assorted Pallet
PTO gear box, hydraulic motor transformer, gear fork and cover, spigot caps

593
New Fan Clutch Rebuid Kit

594
Rotating Electrical Contron
for the rotating point on a knuckleboom

595
Brake Drums
2 Brake drums with 2 brake shoe sets, fit on Freightliner Cascadia

596
New Brake Drums LOT UPDATE
For steer axle
UPDATE only 2pc 

596A
UPDATE ADDED LOT 4pc Brake Drum*
For steer axle or tag axle rated 20,000pds.

596B
UPDATE ADDED LOT 6pc*
Brake Drum for drop axle rated for 13,500 pds

596C
UPDATE added lot,6pc Brake Drum*
Same as lot 596B

596D
UPDATE added lot 5pc Brake Drum*
Same as lot 596B

597
3600AX Brake Drums
4pc New Brake Drums 

618
2 Tires
425165R22.5, recaps

597A
Brake Drums 3600AX
NEW 4pc

597B
Brake Drums 3600AX
NEW4pc 

598
LOT UPDATE Lot removed
New 3600AX Brake Drums
3pc.

598A
Brake Drums 3600AX*
NEW 4pc

598B
Brake Drums 3600AX*
NEW  4pc 

598C
Brake Drums 3600AX*
NEW 4pc 

598D
Brake Drums 3600AX*
NEW  4pc

598E
Brake Drums 3600AX*
NEW 3pc

599
3 Wheel Wells

600
Oil Filters

601
Oil Filters

602
Oil Filters and Air Filters

603
Oil Filters
for Serco loaders

604
Tank Tap Hand Pump
barrel hand pump

605
Gibson Refridgerator and Contents
air tight storage for chemicals and welding supplies

606
Radiators
3 radiators 28'' x 3', 1 oil cooler 21'' x 34'', box of electrical wrap

607
Used Rims
3-22.5'' aluminum rims, 1-24.5'' steel rim

608
New Steel Rims
2-W24.5'' x 8.25'', 4-W22.5'' x 8.25''

609
Rims
9-22.5'' aluminum rims

610
Rims
9-24.5'' aluminum rims

P813489N

611
4 Tires
4-11R24.5, used

612
4 Tires
4-11R24.5, used

613
4 Tires
4-11R24.5, recaps

614
4 Tires
4-11R24.5. recaps

615
4 Tires
4-11R24.5, recaps

616
3 Tires
11R22.5, 11/32 tread depth, virgin rubber

617
2 Tires
virgin rubber, 295/75R22.5, 10/32 tread depth

619
2 New Tires
315/80R22.5, New!

620
2 Tires
425/65R22.5, recapped

621
Tire
New!, 425165R22.5

622
Tire
New!, 315/80R22.5

623
5 Tires
5 pcs., 295/75R22.5, recaps
LOT UPDATE; add 1 tire , 6 pc total

624
3 Tires
3 pcs., 275/80R22.5, recaps
UPDATE LOT;add 1pc.same size with Trailer tread,4pc total

625
3 Tires
11R22.5, 3 pcs., recaps

626
4 Tires
11R225, recaps

627
6 Tires
virgin rubber, 255/80R22.5, 6 pcs.

628
6 Tires
255/70R22.5, 4 pcs., recaps
LOT UPDATE; add 1 tire same size with rim

629
4 Tires
295/75R22.2, 4 pcs., recaps

630
4 Tires
11R22.5, 4 pcs., recaps
LOT UPDATE; add 2pc ,6pc total

631
2 Tires
recap, 315/80R22.5, 2 pcs.
LOT UPDATE: only 1 tire left

632
6 Tires
295/75R22.5, 6 pcs., recaps

633
6 Tires
11R24.5, 6 pcs.
UPDATED LOT; add 1pc ,7pc total

634
Plastic 55 Gallon Drums
13 empty drums

635
Sawhorses
2 pc., steel, 36'' x 36'' high

636
Treated Plywood
3/4'' x 4' x 8' and some smaller pieces

637
Driveway Cloth*
12'x approx.300'  new
Photo Gallery








































































































































































































































































































































































































































































































































































































Save Listing As Favorite

Print Listing information

Share This Listing

  • Facebook
  • Email this Listing to a Friend





Other Sales by
This Company

Jan 1
Des Arc, AR

Oct 1
Middlebury, IN

Sponsored Links

Williamsfield Valley Veneer

Bright Star Realty and Auctions, INC

Bright Star Realty and Auctions, INC

Contact: Loren Beachy
Phone: 574-825-0704
Sale Location
4261 State Route 322
Williamsfield, OH 44093
Sale Dates and Times
Wednesday Sep 21, 2022 Completed
Sale Terms and Conditions
There is a 13% online buyer’s premium in effect for all purchases. All items sell where is as is with no warranties or guarantees. Buyer is responsible to inspect all merchandise prior to placing bids. All items must be paid within 7 business days. Payment terms: Cash, check, wire transfer, or any major credit card. ($2,500 limit applies to credit card payments.). All items are pick-up only. Smalls must be removed within 2 days. All items must be removed within 60 days. Loadout  terms 45 days on installed items and 1 week for uninstalled. Please call agent for more info. Buyer shall assume responsibility of all property when auctioneer says sold. Auction company is not responsible for any missing or stolen items.

 

 

 

 

 

 

 

Bidder Terms and Conditions

These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer.
 
  1. Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
 
  1. Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded, where required, as follows:
IN, IL , WI , KY , OH , VA , AR , NY, NC, TN, MO .
 
  1. Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer: “Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction. “Absentee Bidder” means a person or entity that submits an Absentee Bid.
“Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION.
“Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids.
“Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected and where a Buyer may pick up Personal Property.

“Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder.

“Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms.

“Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer.
"Buyer" means the Winning Bidder with respect to each Lot of Personal Property or of each parcel of Real Property.
"Buyer's Premium" is an amount with respect to each Lot of Personal Property or with respect to each parcel of Real Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account. For Real Property offered Subject to Seller’s Confirmation, the Buyer’s Premium will be calculated on the amount of the High Bid Subject to Confirmation.

“Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property or Real Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation.

“Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer.

“High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot or on a parcel of Real Property.

“High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on Real Property put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price.
 
“High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot or a parcel of Real Property.

"Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event.

“Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer.

“No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale.

“Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions.

“Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online.

"Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered.

“Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers.

“Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer).

“Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms- length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction.

“Property” means the Real Property and the Personal Property.

“Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium. "Registered Bidder" means a person or entity that has registered to bid at the Auction.

“Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction.
“Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE.

“Reserve Price” means the minimum price that Seller is willing to accept for specific Property.

“Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer.

“Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid.

“Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by
Seller).

"Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid.

“Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction.

“Without Reserve” means Absolute.
 
 
  1. Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.
 
  1. Auction Conducted in the State of Indiana.
 
    1. For Auctions in the State of Indiana and Online. All Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are entered into in the State of Indiana, all bids and payments are received in the State of Indiana, and the Realty Purchase Agreement, if any, will be formed and entered into in the State of Indiana.
    2. For Auctions outside of the State of Indiana. All Property is offered for sale in the state of the Auction Site, and will be sold in the state of the Auction Site. Notwithstanding the physical location of any Bidder or any Participant, these Terms are entered into in the state of the Auction Site, all bids and payments are received in the state of the Auction Site, and the Realty Purchase Agreement, if any, will be formed and entered into in the state of the Auction Site.
 
  1. Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.

The Buyer’s Premium for Personal Property will be amount equal to thirteen percent ( 13%) of the Hammer Price for each Lot Knocked Down at the Auction.

The Buyer’s Premium for Real Property will be amount equal to percent ( %) of the Hammer Price for each parcel of Real Property Knocked Down at the Auction.
 
  1. Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
  2. Nature of the Auction.

X The Auction for the Personal Property is an Absolute Auction.

The Auction for the Personal Property is With Reserve. Auctioneer may Withdraw any Lot offered With Reserve prior to the Fall of the Hammer.
 
  1. Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
 
  1. No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
 
  1. Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
 
    1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
 
    1. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
 
    1. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
 
    1. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
 
    1. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
 
    1. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
 
    1. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
 
    1. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.
 
    1. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties,
(i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
 
    1. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
 
    1. No Reduction or Retraction of Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.
 
    1. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.
 
    1. Online Bids. Online bids may not be reduced or retracted.
 
  1. Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). Absentee Bids may be initiated and advances in accordance with Auctioneer’s policies and procedures. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
 
  1. Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
 
  1. Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
 
  1.  
 
  1. Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
 
  1. Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot or item of Personal Property or each parcel of Real Property will be the Buyer of such Property.
 
  1. All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
 
  1. Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
 
  1. Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.
 
  1. Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or
representation by Auctioneer
 
  1. Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
  1.  
Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
 
  1. Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ring man, or multiple bid assistants or ring men, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
 
  1. Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the

vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
 
  1. All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
 
  1. Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked- Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
 
  1. Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases must be paid for within five (5) days after the close of the Auction. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.
 
  1. Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Disassembly and removal shall be done in a workmanlike manner, and each Buyer shall indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer's employees, agents, representatives, or independent contractors, in connection with the disassembly or removal of any Personal Property. Any and all damages to the Auction Site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller.
 
  1. Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them.
 
  1. Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.
 
  1. No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
 
  1. Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
 
  1. Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.




 
  1. Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled
to specific performance or other equitable relief.
 
  1. Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
 
  1. Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
 
  1. Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
 
  1. Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
 
  1. Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
 
  1. Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim, suit or cause of action relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
 
  1. Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their respective rights hereunder.

 
Listing Details
This will be a nice sized  auction with some very good rolling stock

00
Information Lot
Complete liquidation of Williamsfield Valley Veneer in Williamsfield, Ohio, including HMC carriage, Precision chipper, Brewco Big Band Resaw, multiple Komatsu wheel loaders, Kenworth log truck, multiple chip trailers, and much more. 
QUESTIONS CONTACT EUGENE 260.350.8953 
LOADOUT: All uninstalled items MUST be removed within 10 days. Rolling stock MUST be removed within 10 days. Loadout is available on all items. 45 days for removal of installed equipment. Rigging is available. 
TRUCKING/SHIPPING: is available for all items by calling  Darrin at 574.349.8485 

98
Manual Sealless Steel Strapping Tool
Model A333, works for 1/2" 5/8" or 3/4" banding, new in box. Shipping available for $30

3

99
Heavy Equipment Key Set 39 Keys
Shipping available for $20

100
Milwaukee Cordless Grease Gun
New in case with battery and charger, 18V, MN 2646-20

101
Milwaukee Cordless Grease Gun
MN 2646-20, 18V, charger and 1 battery, good condition

102
Milwaukee Cordless Fuel Impact
MN 2864-20, 18V, 5.0 amp battery, charger, 3/4'' square ring

103
Milwaukee Cordless Fuel Impact
MN 2767-20, 1/2'' square ring, 18V, 5.0 amp battery, no charger, good condition

105
Milwaukee Cordless Fuel Impact
MN 2763-20, 18V, square ring 1/2'' drive, 2 pc. 5.0 amp batteries, charger, good condition

106
Dewalt Reciprocating Saw
MN DW304P, some new blades

107
Encore Steel Strapping and Crimper
MN EP-1425 (tensioner), MN E1850-01-A (crimper), NEW!

107A
FSI Jett Tally (Handheld)
hydrus chain tally, includes charger and computer

107B
Honeywell Lumber and Log Tally (Handheld)
MN 99EXLO, includes charger and computer cable

107C
40'' Grading Sticks
2 pc., New!

107D
36'' Grading Sticks
3 pc., New!

107E
42'' Lumber Marker , 32'' Tree Scale Stick, 36'' Grading Stick
(Used)

108
Ridgid 14'' Metal Chop Saw
3 extra blades, good condition

109
Lincoln Cordless Grease Gun
MN 1880 power luber, includes 2 batteries and charger, good condition

109A
Lincoln Cordless Grease Gun
MN 1880 power luber, includes 2 batteries and charger, good condition

109B
Lincoln Cordless Grease Gun
MN 1880 power luber, includes 2 batteries and charger, good condition

109C
Lincoln Cordless Grease Gun
MN 1880 power luber, includes 2 batteries and charger, good condition

110
Husqvarna Chain Saw
MN 576 x P, X-Torq, 24'' bar, wooden box with lid, good condition

110A
Husqvarna Chain Saw
MN 372 x P, X-Torq, 20'' bar, good condition

110B
Husqvarna Chain Saw
MN 572 x P, 19'' bar, good condition

110C
Husqvarna Chain Saw
MN 576 x P, 19'' bar, good condition

111
HMC Debarker
4' x 7' operator cab with controls,10 HP electric on hydraulic, 40 HP electric motor on head, cable and pulley head carrier, MN V206HST, SN 352-86, 3'' x 24'' bull wheels, 13' bull wheel length, barn sweep connected to debarker, bull wheel bearings show some wear, control box (no wiring), air kick off, hydraulic barrel with pump

112
3 Strand Log Deck
10' x 18', Tulsa gear box, hydraulic drive, stop and load

113
HMC 4-Head Block Carriage
16' x 6', air dogs and kickers, tongue dog, bottom cant kickers, electric, set works, 5 axle, 10'' wheels, panaraph arm, MN AC40BD, SN 530-93, controls in cab, 1st Lot of an Entirety

114
HMC Carriage Drive and Feed
50 HP electric motor, 5/8'' cable, 20'' idler pulley, control valve in cab, MN HD-40, SN 460-93, good condition

115
Track and Feed
45'' center to center, 50', 22'' high, welded on I beam in floor

116
HMC Husk
56'' husk, 7' 6'' x 5', 30'' top saw, 20'' x 5' 6'' off bear belt, 16'' belt, 30 HP electric motor on top saw

117
Lincoln Electric Motor
125 HP, 445T frame, 1,185 RPM, starter control box, no wiring, SN 1981760

118
HMC Saw Cab
4' x4' x 6' high, A/C and heater, camera screen, extra seat

119
HMC Entirety
Lots #113-118 with a 10% raise

119A
HMC Carriage Drive
includes drum and cable, 50HP electric motor on drive pump, Hydraulic drive motor has been swapped out, needs repaired.

120
HMC Log Turner
46'' hydraulic drive, extra chain, control valve in cab

120A
HMC Hydraulic Pack
15 HP electric motor, no hydraulic lines

121
4 Strand Log Deck
11' 6'' X 20', 4' nose skids, Tulsa gear box, hydraulic drive, no control valve, cut off saw

122
Blower
15 HP electric motor, 24'' blower, 10'' inlet, 8'' outlet, includes 10'' pipe to saw

123
Mellot Rollcase and Pop-up Deck
32'' x 22', 6 1/2'' x 24'' rolls, 24'' roll spacing, electric drive, board stop switch, pop-up transfer deck with foot switch, 4 strand, 12' x 6 1/2'', extra chain, electric drive

124
Mellot Rollcase
36'' x 12', 6 1/2'' x 24'' rolls, 24'' spacing, no power, no drive

125
4 Strand Transfer Deck
10' x 9', foot switch, electric drive, pop up, board stop, breaker box, roof top style chain H78

126
Reckart Edger
2 moving saws, 3 stationary saws, 6'' x 42'' capacity, 4' x 9' infeed table, 21'' saw blades, 50 horse electric motor, SN 134, Size R612, 3 laser lights, side press bars, hydraulic cylinder, 4' x 9' outfeed belt, 10 HP electric hydraulic pack

126A
Laser Lite*
Model L-30-R W/mounting arm  [Rebuilt]

126B
Laser Lite*
Model #L-20-R    [Rebuilt]

126C
Laser Lite*
Model #L-10-R     [Rebuilt]

126D
Laser Lite W/Mounting Bracket*
Model# L-30-R    [Rebuilt]

127
Saw Dust Transfer Belt
17'' x 10', electric drive, air cylinder

128
Blower
24'' blower, 10'' inlet, 8'' outlet, 15 HP electric motor, includes 10'' pipe to edger

129
Transfer Belt
16'' x 26' with electric drive

130
Side Transfer Belt
16'' x 7' with electric drive

131
Precision Chipper 1st Lot of an Entirety
# C-2189, chipper size 48-11, 3 knives, 100 horse electric motor, includes pipe to cyclone, includes set of New bolts

132
Shaker Screen
5 x 5, # S-1667, includes 4' cyclone

133
Chip Blower
E-36KW, #108254, dual loading chutes, Phelps, 20 horse electric motor

134
Fines Blower
24'' blower with 10'' inlet, 8'' outlet, includes 10'' pipe to blower, 15 horse electric motor

135
Entirety 131-134
Precision Chip pack, with a 10% raise

136
Vibrating Conveyor
Mellot, 25'' overall width, 6' x 10' slide pan, 18 1/2'' pan, 4'' sides, 21' with chipper adapter, electric drive

137
Rollcase
28'' x 21', 5 1/2'' x 20'' rolls, switch blade for pop up transfer, some spiral rolls, electric drive

138
4 Strand Transfer Deck
12' wide x 19' long, hydraulc drive, includes control box, 4 strand pop up transfer (6' 6''), electric drive, pop up rolls for cant transfer, includes control box, 20'' x 16', 6 1/2'' x 12'' rolls

138A
Hydraulic Pack
5 horse electric

139
4 Strand Transfer Deck
10' x 22', roof top chain, 4' slant deck for side loading, electric drive

140
*4 Strand Green Chain (Reckart)
10' x 6'' x 45', elelctric drive

141
Mellot Transfer Belt
27'' x 53', 28' flat, 25' on incline, elecrtic drive, 23'' pan, 22'' belt

141A
Skate Rolls
18'' x 10', 2 1/2'' rolls

142
Transfer Belt
electric drive, 24'' x 13'

143
Brewco Big Band Grade Resaw
# BD0003, 1 3/4'' x 40'' wheels, Press downroll with air cylinder, MN E1620 (runs 2'' bands), 40 horse electric motor, computerized control center, lubricating system, 12'' x 112'' feed belt-hydraulic drive, 14'' x 16'' capacity. 1st lot of an entirety.

144
Brewco Run Around System
hydraulic drive, controlled by main control panel,includes air supply tank (2 hydraulic packs), oil cooling radiator

144A
*Reckart Blower
NOT PART OF ENTIRETY 15 HP electric motor, 24'' blower, 10'' inlet, 8'' outlet, includes 6 flex pipe to blower

144B
*Pennsaw-AM Oil
NOT PART OF ENTIRETY 5 full buckets, 2 part buckets

145
Brewco Big Band Entirety
Lots #143 - 144

146
Set of Band Saw Wheels
1 3/4'' x 40'' wheels

147
Set of Band Saw Wheels
1 3/4'' x 40'' wheels

148
Cabinet and Contents
Tools and supplies for resaw, 36'' x 24'' x 6' cabinet

149
Shelf and Contents
Hydraulic motors, New belts, includes wooden box and used belts and Tyvar plates (5 pc.), 2'' x 60'', parts and misc. for run around

150
New Saw Blades
20' x 4'' x 2'' x .005 x .740, 30 new blades, 290 used and resharpened bands

150A
Saw Blades
60 pieces used and not resharpened

150B
Saw Blades
40 pieces used and not resharpened

151
ITT Reznor Heater
electric fans, natural gas heater

152
Ingersoll Rand Air Compressor
480 3 phase MN 7100, SN NAR10203995, 15 HP electric motor, with control box, no air lines incuded

153
Hankison Air Dryer
MN DH60, # 3332-2-9808-280, 110V, 60 SCFM at 100 PSIG

154
Ingersoll Rand Air Compressor (New in 2020)
480 3 phase MN 7100, # NAR10617246, 15 HP electric motror, 120 gallon tank, with electric cut out, no air lines included

155
Ingersoll Rand Air Compressor
480 3 phase MN 7100, NAR10203940, 120 gallon tank, with electric cut out, no air lines included

155A
Gardener Denver Air Dryer
SN 1000002964412, MN DGHB-115, single phase 110 plug in, 115SCFM@100PSIG, filters for dryer, ativated alumina, Hankison Centrifugal separator MN MS400D, auto drain

155B
Air Cooling Radiator
42'' x 23'', electric motor, lines with bypass valves

156
Fans
36'' portable fan, 14'' fans on stand x 2

157
Saw Blade
F8 style, 56'' good condition

158
Saw Blade
B style, 56'', good condition

159
Saw Blade
F8 style, 56'', good condition

160
Saw Blade
B style, 56'', good condition

161
Saw Blade
F8 style, 56'', good condition

162
Saw Blade
B style, 56'', good condition

163
Saw Blade
B style, 56'', good condition

164
Saw Blade
B style, 56'', good condition

165
Saw Blade
B style, 56'', good condition

166
Saw Blade
B style, 56'', broken shoulder

167
3 Saw Blades
56'', damaged

168
4 Lumber Carts
42'' x 6', steel wheels and 38'' posts, 2 x 2 tubing frame

168A
3 Lumber Carts
42'' x 6', steel wheels and 38'' posts, 2 x 2 tubing frame

169
4 Lumber Carts
2'' x 2'' tubing, 42'' x 6', steel wheels

169A
3 Lumber Carts
2'' x 2'' tubing, 42'' x 6', steel wheels

169B
3 Lumber Carts
2'' x 2'' tubing, 42'' x 6', steel wheels

169C
3 Lumber Carts
2'' x 2'' tubing, 42'' x 6', steel wheels

170
Quad Release Ice Melt
13, 50 lb. bags

171
2 Fans
24'' floor stand, 28'' floor stand

172
6 Fans
in green chain building

172A
24'' Fan
electric, mounted on wall mount, swing arm

173
Cable and Pulley System
cable and pulley system for cord carrier, 2- 50' cords

173A
Water Tank and Pressure System
250 gallon water tank with pressure pump, includes pipe line along greenchain walls, was used to spray lumber stain control.

174
Lights
plug in lights, 2 pc.

175
6'' PVC Pipe
all 6'' pipe going to dust bin, approx. 300'

176
Cox Reels Air Hose Reel
retracting 1/2'' hose

177
Tool Lot
Brooms, shovels, mite, cant hooks

178
Tool Lot
Brooms, shovels, scraper, cant hooks, fork ax

179
Tool Lot
Brooms, shovels, fork , hoe

180
Tool Lot
Brooms, bars, fork, shovel

181
Tool Lot
Brooms, shovels, rakes

182
Banding Tools
6 tighteners, 6 crimpers, 3/4'' clips

183
3/4'' Banding
3 New rolls

184
Banding Cart with Roll of 3/4'' Steel Banding
1 1/2 gallon pump sprayer, gas cans

185
Chains
1 pc. 3/8'' x 20' with hooks, 1 pc. 1/4'' x 20' with hooks

186
Lumber Cart, Lights, Polyboard, and Banding Cart
lumber cart with 4 posts, 44'' inside, 6' long, 1 pc. 1/8'' x 4' x 8' poly board, 1 pc. 1/8'' x 24'' x 70'' poly board, 2 flourescent lights, 2' x 4', tarp, banding cart with 3/4'' steel banding

187
Parts for HMC Carriage
Air cylinders, New bearings, lots of misc. parts

188
Saw Sharpener Shanks and Teeth
2 hanchet Jockey grinders, (1 like New), some new and used saw shanks and teeth, laser lites, saw wrenches, New grinding stones, Jockey grinder for parts, MN 06H

189
Roller Chains
lots of used chains, 4 boxes of New RS60RIV

190
Belts and Sprockets
Skid of used belts and sprockets, sledge, shovels and broom

191
Capacitor Bank
in close to new condition.

191A
Office Desk and File Cabinets
knee hole desk, 2-2 drawer file cabinets, 20'' x 48'' desk
LOT UPDATE; knee hole desk was removed and 2pc file cabinet added.
1pc 15''x35''x5' w/4drawers
1pc 14''x18''x44'' w/3drawers including first aid supplys

191B
File Cabinets*
2pc 15''x35''x5'     good condition 

192
Office Chair and Aluminum Ladder
20' aluminum extension ladder, 8' wooden step ladder

193
Shop Vac
10 gallon

194
General Electric Motor
40 HP, frame 364TS, 1180 RPM

194B
#5 Soft start
good condition

195
Lincoln Electric Motor
150 HP, Frame 444T, 1780 RPM

196
2 Electric Motors
Baldor 40 HP, 324T frame, 1780 RPM, General Electric 30 HP, 256T frame, 1755 RPM

197
Used Belting and Cable
used cable, skid of used belting, various sizes

198
15 HP Electric Hydraulic Pack Mac Neil
50 gallon tank, SN 19589100, MN K11596

199
Cat Claw Band Sharpener and Setters
looks complete, 2 Cat Claw hand setters, extra parts

200
Automatic Band Saw Setter
made in the US, electric drive

201
Steel Scrap Pile
on side of building, 55 gallon barrels full of steel

202
New Steel
2 pc. 2'' x 4'' x 24' square tube, 5 pc. 2'' x 2'' x 20' angle, 1 pc. 2'' x2'' x 6'' x 18' c-channel, 1 pc. 1 1/4'' x 1 1/4'' x 3'' x 20' c-channel, 1 pc. 1/4'' x 4'' x 20' flat, 1 pc. 3/8'' x 4'' x 20' flat, 1 pc. 1/2'' x 1'' x 20' flat, 1 pc. 3/8'' x 2'' x 13' flat, 1 pc. 1/4'' x 1 1/2'' x 2 1/2'' x 20' angle

203
New Steel
1 pc. 2'' x 4'' x 11' square tube, 1 pc. 3/8'' x 4'' x 6'' x 10' square tube, 1 pc. 1/4'' x 6 1/2'' x 6' pipe, 1 pc. 1/4'' x 6 1/2'' x 7' pipe, 1 pc. 1/4'' x 6'' x 6'' x 11' square tube, misc.smaller pieces, 3/8'' x 5'' x 8'' x 9' I beam

204
Treated 6'' x 6'' Posts
2 pc. 6'' x 6'' x 14', 1 pc. 4'' x 4''x 9'

205
Loader Forks
6'' wide

206
Ingersol Rand Air Compressor and Dryer
SN NAR10203440, MN 7100, 15 HP, electric, 120 gallon tank

207
Air Compressor
10HP, electric, 80 gallon tank

208
Michigan Knife Grinder
SN 1163, MN 48, chipper knife grinder, holds 4 knives,size 48, new parts

209
Chipper Knives
lots of used knives, bolts and parts, 3 pc. NEW 14 3/4'' counter knives, 6 pc. New 4'' x 14 3/4'' knives

210
Babbit Melting Pots and Knife Jig
3 hand held melting pots (electric), 1 knife jig, tools

211
Shelf and Cabinet with Parts
5 drawer cabinet with parts, snap rings and o-rings, shelf with parts, electrical parts, 2 pc. Ingersol Rand 1/2''-20V cordless impact (broken) dri Micro meter

212
Barrel Top Parts Washer
can fluid

213
Central Machine Metal Cutting Band Saw
1/2'' band, 4'' x 6'' capacity

214
Delta Rockwell Drill Press
8'' stroke, 1/2'' chuck

215
Bench Top Grinder
6'', mounted on pedestal

216
Steel Workbench 5'' Vise
clamps, open end wrenches, bench grinder with wire brush, all tools and parts on workbench, 28'' x 9' with 3/8'' top

217
Shelf with Welding Supplies
welding helmets, jackets, and rods, 36'' x 16'' x 7', electric motor, misc. parts

218
Shelf with Parts
used cutting blades, sprockets, paint, bearings, 36'' x 16'' x 7', all contents on shelf

218A
Dewalt Hammer Drill
corded, good condition

219
Snap-on Tool chest with Tools
31'' x 15'' x 28'', loaded with tools, including snap-on, Milwaukee cordless ratchet, sockets, screwdrivers, mallets

219A
Craftsman Tool Chest with Tools
Craftsman and Jobsmart tools, 20 1/2'' x 8 1/2'' x 14''

219B
Cresent Socket Set and Jobsmart Sockets
Cresent sockets (open end wrenches), Jobsmart sockets 3/4'' drive, 8 pc. 1''-1 1/2'', pry bars, hammer, brush

219C
Tap And Die Set*
good condition

219D
Orange Tree Marking paint*
16 cans spray paint

220
File Cabinet with Parts
4 drawer, all contents, seals, hydraulic fittings

221
Bolt Bin and Cabinets
3 cabinets with parts, 35'' x 12'' x 42'' bolt bin with all contents, bolts, nuts, and washers

222
U Punch Time Clock with Card Holder and Cards

223
Anchor Seal Spray Pump and Nozzzle
electric motor, pump with hose and wand, 1/4 barrel with Anchor seal

224
Barrel Hydraulic Oil
55 gallon AW46 hydraulic oil

225
Lots of Tools, Cresent Wrenches and Screwdrivers
6 adjustable wrenches, screwdriver set, level, square

226
Wrench Set
open end wrenches, 3/8''-2'', 50 pc.

227
Shelf with Parts
36'' x 15'' x 7', microwave, coffee pot, griddle, stereo, all parts on shelf

228
Chainsaw Parts
36'' x 15'' x 7', 2 new 20'' bars, punches, all parts on shelf and bars and chain on wall

229
Bosch CS10 Saw
working saw that is being used

229A
Bosch CS10 Saw
working saw that is being used

229B
Bosch CS10 Saw
working saw that is being used

246

229C
Bosch CS10 Saw
working saw that is being used

229D
Bosch CS10 Saw
working saw that is being used

230
Ridgid Pipe Wrenches, Pry Bars, Sledge
Ridgid 48'' aluminum pipe wrench, 2 pc. Ridgid 18'' steel pipe wrench, Murry 24'' aluminum chain type wrench, 2 pc. pry bars, 8 pc. sledge with fiberglass handle

231
Chain Saw, Chaps, Hard Hats, Skid of Parts
1 pc. Husqvarna chaps and hard hat, 1 pc. Stihl chaps and hard hat, pressure washer wands, 2 chairs, misc. parts

231A
Premier Mold Control
1 1/2 containers full

232
Husqvarna Trimmer with Blade Attachment
MN 1296K, string, good condition

233
Echo Blower & Hand Pruner Saw
MN PB-520, good condition

234
Dewalt 7'' Angle Grinder
MN DW840, good condition

235
Dewalt 4 1/2'' Angle Grinder
MN DWE402, with wire brush, good condition

236
Milwaukee 4 1/2'' Angle Grinder
# 6142-30, good condition

237
GP 1'' Air Impack 3/4'' Drill
with socket, Black and Decker 3/4'' drill (reversing), electric

238
Tool Lot
Handyman jack, 8 lb. Sledge with fiberglass handle, 2 pry bars, blue point 3/4'' ratchet handle 42'', 1'' ratchet handle 36''

239
New MIP Tensioner and Crimper
MN MIP-1300, crimp tool MN MIP 1152-34

240
Encore Steel Strapping Tensioner
NEW!

241
Misc skid
battery grease guns for parts, 3 Lithium batteries for Lincoln grease gun (works), Scotts cordless leaf blower, broom and shovel, 4'-8' fluorescent bulbs

242
Toro Pro Grind 2000 Tub Grinder
MN 2000, SN 867341KBL, knuckleboom with wide grapple, meter reads 594 hours, Cummins engine (rebuilt), 24' folding discharge belt, mounted on trailer with stabilizer arms, good running condition, extra screens and teeth

243
Komatsu WA200 Wheel Loader
MN WA200-7, SN 80740, PIN # KMTWA126KEA080740, NEW TIRES! pin on forks with clamp, meter reads 14,180 hours, Komatsu engine SN 144057 and MN SAA4D107E-2, heat and A/C. new tires, radio, pilot joystick controls, 1 owner machine in good running condition

244
Komatsu WA200PZ Wheel Loader
MN WA200PZ-6, SN 71757, PIN # KMTWA105H01071757, quick attach fork system, Komatsu engine SN 35042244 and MN SAA4D107E-1, meter reads 6,101 hours, pilot joystick controls and 3rd valve, heat and A/C, radio, tire tread 30 to 50%, 1 owner machine, in good running condition

244A
Forks Quick Attach JRB
6'' x 48'' forks with clamp

244B
Slip On Sawdust Bucket
8' x 4' x 4'

245
Komatsu WA200PZ Wheel Loader
SN 71835, MN WA200PZ-6, PIN KMTWA105U01071835, quick attach system, Komatsu engine SN 26586370 and MN SAA4D107E-1, meter reads 9,025 hours, pilot joystick controls and 3rd valve, heat and A/C, radio, tire tread 30 to 50%, 1 owner, good clean machine

245A
Forks Quick Attach with Clamp
JRB, 6'' x 48'' forks, fits Komatsu loaders

245B
Slip On Sawdust Bucket
8' x 4' x 4', 42'' between fork holes

247
*Volvo Wheel Loader
RESERVE FOR 10 DAYS FOR LOADOUT, MN L50E, VIN L50EV71628, 100 HP, 21,252 hours, year 2007, Rebuilt engine model D4DLAE2, quick attach system, 6'' x 42'' forks with clamp, 24V system, heat and A/C, 3 lever boom controls, good tight machine that runs well

247A
Slip On Sawdust Bucket Loader
76'' x 46'' x 48''

248
Allis Chalmers Forklift
RESERVE FOR 10 DAYS FOR LOADOUT, MN FPL50-24, SN 46791000, 5,161 hours, propane engine, 4''x 53'' forks with side shift, 82'' 2 stage mast, brakes need to be worked on, runs and operates, rough condition

249
Kubota Track Hoe KX057-4
MN KX057-4, VIN KBCK0574KK3031122, 419 hours, year 2019, engine 8KE2845, rubber tracks, 24'' bucket with clamp, 6.5 float angle blade, pilot joystick controls, cab has heat, A/C,and radio, includes 4' bucket, quick pin on, low hours, is in excellent almost new condition

250
*JLG Scissor Lift
2005 MN 1930ES, 387 hours, electric scissor lift, new batteries in 2021, 23 x 100 solid tires, good condition

251
Oshkosh Truck with Prentice 210 Knuckleboom Loader
has title, MN C-1834, SN 9056, Fuller transmission with 3 speed aux., Detroit 671 Engine, 6 wheel drive, 10 speed, completely rebuilt, meter reads 113,141 miles, Prentice 210 knuckleboom, SN 210P20875, MN D-210, Detroit 353 rebuilt engine, hydraulics have been rebuilt, lever controls

252
*Hood 28000 Knuckleboom Loader
 MN 28000, SN 287184, approx. 10,000 hrs. new transfer pump, remote hydraulic hook up for slasher saw, 34' boom, mounted on a Pitts trailer, cab has heat, A/C, radio, and joystick controls, front glass has a crack, continues rotating grapple, John Deere Powertech 6.8 engine, Eberspacher system, good tires, very good condition

253
*Prentice 210D Knuckleboom Loader
MN D210D, SN 210P26845, 9,888 hours, has hydraulics for buck saw, Cummins engine,  trailer mounted, joystick controls, foot pedal swing, continuous grapple, good wheels and tires, runs and operates good.

254
*2007 Kenworth T800 with Knuckleboom Loader
New Trunion suspension in 2020, Has a 2017 Serco 1050XR knuckleboom loader, 525 HP Cat, 18 speed, year 2007, full locking rear ends, rebuilt engine at 576,245 hours, has rear mount

255
2004 Peterbilt 379 with 2016 Serco 1050XR Loader
Black log truck with front mount loader, 550 HP Cat engine, 18 speed, year 2005, full locking rear ends, new tag axle, new shocks all around, new springs on drive axles, new torque arms, engine rebuilt December 2019 by Kenworth of Youngstown, transmission rebuilt in January 2020 by Transgear of Hubbard, around 100,000 miles on both rebuilds

256
2002 Freightliner FLD120 Truck
2002 Freightliner
Model: FLD120
Mileage:812,334
Drive Line: 6x4
Engine Type: 12.7 Detroit
Fuel Type: Diesel
Horsepower:500
Transmission:10 speed Eaton Fuller
VIN #: 1FUJAHCG42PK16607

Features and Notes: Detroit 60 series engine, wet line

257
*2005 Kenworth W900 Truck
2005 Kenworth
Model: W900
Mileage:402,827, since Platinum rebuild by OH Cat, 1,402,827 total miles
Drive Line: 6x4
Engine Type: L6, 14.6L (893 CID)
Fuel Type: Diesel
Horsepower:475 Cat
Transmission: 10 speed
VIN #: 1XKWDB9X45J070441

Features and Notes: MN W900, engine MN C15475 with twin turbo, aluminum wheels, good tires, wet line, New hydraulic pump, rebuilt transmision, clutch & fly wheel less then 100K miles ago.  good condition

258
2002 International 9200i Truck
2002 International
Model: 9200i
Vehicle Type: Truck
Mileage:391,761
Drive Line: 6x4
Engine Type: L6, 14.0L (855 CID) N14 Cummins
Fuel Type: Diesel
Horsepower:525
Transmission:10 speed Eaton Fuller
VIN #: 2HSCEAERX2C032422

Features and Notes: MN 9200I6X4, flat top sleeper

259
1999 International 9400 Truck
1999 International
Model: 9400
Mileage:691,906
Drive Line: 6x4
Engine Type:N14 Cummins
Fuel Type: Diesel
Horsepower:525
Transmission: 10 speed Eaton Fuller
VIN #: 2HSFHAER4XC091249

Features and Notes: MN 94006X4, wet line, engine rebuilt in August of 2022, rebuild done in-house, New turbo and air to air, raised sleeper

260
2014 Freightliner Cascadia 125
460 HP Cummins ISX engine, 687,782 miles, year 2014, 10 speed Eaton Fuller transmission, good drive tires, aluminum tires, very good condition

261
*2004 Mack CX613 Vision Truck
2004 Mack
Model: CX613 Vision
Mileage: 706,710
Engine Type: Mack L6, 12.0L (728 CID)
Fuel Type: Diesel
Horsepower:460
Transmission: 13 speed Maxitrque
VIN #: 1M2AE07Y14N020814

Features and Notes: MN CX613, Silver Bulldog, Mack engine, wet line, full locking rear ends, aluminum wheels, good tires, very good condition

262
1998 Peterbilt 379 Truck
1998 Peterbilt
Model: 379
Mileage: 234,793
Drive Line: 6x4
Engine Type:11.1 Detroit
Fuel Type: Diesel
Horsepower: 430 
Transmission: 9 speed Eaton Fuller
VIN #: 1XP5DR9X8WD454978

Features and Notes: 379 Detroit 60 series engine, full locking rear ends, aluminum wheels with good tires, very good condition

263
BMY Military 6 x 6 Truck
Has title, 1990, meter reads 25,930 miles, VIN 31/00549, Cummins engine SN 44386672, 5 speed, 5 ton rating, runs good

264
2013 Chevrolet Silverado Pickup Truck
2013 Chevrolet Silverado
Mileage: 114,804
Body Type: 4 Door Cab; Extended
Trim Level: LT
Drive Line: 4WD
Engine Type: V8, 5.3L; FFV
Fuel Type: Gasoline/E85
VIN #: 1GCRKSE77DZ234222

Features and Notes: MN 10753, crew cab, 5.3 Vortec engine, very good condition

265
Liberty Jeep
year 2006 ,4x4, Sunroof,folddown rear seat,meter reads 182,960 mi.
vin#1J4GL58K26W237937
3.7L engine
Runs and drives good
 

265A
Kenworth Parts Truck
VIN 1XKDDB9X35J641811, year 1995, no hood, engine, or transmission

265B
Kenworth Fiberglass Hood
Fiberglass

265C
Kenworth Parts Truck
no engine or transmission

265D
* Freightliner Parts Truck with Super Cab
no engine or transmission, no title

265E
International Hood
Fiberglass

265F
Rubber Tracks
off of forwarder, 28'' wide, 2 pieces

265H
Poly Tank
1,500 gallon, 8' diameter, 5' 6'' high

265G
Parts Frame

265I
Side Step with Tool Box

265J
Hydraulic Tank Truck Mount
22'' x 14' x 42''    New tank for Serco knuckleboom trucks.

265K
Truck Fuel tank and Mount
aluminum

265L
Scrap Pile

265M
Galvanized Sink
26'' x 89''

265N
Truck Head Board with Built In Hydraulic Tank
84'' x 62'' x4'' tubing

266
2019 Kaufman DT35 Lowboy Trailer
MN DT35, VIN 1K9FR3622KB36754, low hours, year 2019, GX390 Honda Engine on hydraulics, 102'' x 24' deck plus 12' over wheels, 14'' swing outs on each side for a wide load, tool box with 6 ratcheting boomers and chains, aluminum wheels, good tires, very good condition

267
2021 Pitts LT42 Log Trailer
MN Load paying series, VIN 5JYLT4027JPP07068, year 2021, 42', 6 bunks 101''X7' high, steel wheels with good tires, 1' extended bumper, mounted tie down straps, almost new condition

268
Pitts Log Trailer
MN LT42, VIN 5JYLT4228MPP21269, year 2018, 42', 6 bunks, 101'' wide, steel wheels with good tires, mounted tie down straps, very good condition

269
Pitts LT42 Log Trailer
VIN 1PELT4228TP960678, year 1996, 6 bunks, 8' x 7' high, 44' long, steel wheels and good tires, mounted tie down straps, good condition

270
Pitts LT40 Log Trailer
VIN PE9LT40T3KP960235, year 1989, 6 bunks 8' x 7' high, steel wheels with good tires, 42' long, mounted tie down straps, good condition

271
Rebel Trailer
VIN 1R41Y02C7CM000418, year 1983, 42', 8' x 7' high bunks, 6 bunks, steel wheels with good tires, mounted tie down straps, good condition

272
Reitnouer Maximiser Trailer
VIN 1RNF48A27FR034189, year 2015, aluminum flatbed trailer, 90,000 lb. capacity, 102'' x 48', aluminum wheels, tie down straps mounted on rail, very good condition

273
Peerless Walking Floor Trailer
2013, 45' open top w-good tarp system, very good condition, two extra new swinging doors. 46'' x 90'', go with Peerless trailer, VERY NICE!

274
Peerless CTS Trailer Walking Floor
VIN 1P1E04221TPA20851, year 1996, walking floor chip trailer is 8' x 8' x 42', just replaced shoes & parts of the floor that needed it, new suspension 5 years ago, steel wheels with good tires, good condition

275
Budd Chip Trailer 1979
VIN 178523E, 8' x 42', has just been inspected and is OK, good condition

276
Budd Chip Trailer 1979
VIN 167893, 8' x 42', has just been inspected and is OK, good condition

277
Budd Chip Trailer 1979
VIN 178557E, 8' x 42', has just been inspected and is OK, good condition

278
Fruehauf Chip Trailer 1977
VIN HPY583113, 8' x 40', just inspected and is OK, good condition

278A
Aluminum Utility Trailer
65'' x 120'' inside, 4' tail gate, manufactured by: Carry On Trailer Corp., wood floor

279
Fuel Tank with Metered Pump
electric pump, 38'' x 60'' on skids

279A
Fuel Tank with Hand Pump
48'' x 70'' on skids

280
Debarker Parts
New V belts, gear box, and joystick control handle, new head bearings, all parts on pallet

281
Edger Parts
feed roll with some new inserts, gear box, bearings, 19 blades 21'', all parts on pallet

282
Cart Wheels and Parts
All parts on skid, hydrauliic pump and cylinders, 7 pc. 2'' x 8'' cast wheels with bearings

283
Tire Chains
2 pc. For semi tractor dual wheels

284
Belt Guards
all items on skid

285
Bolts and Nuts
misc. bolts and nuts, all items on skid

286
Rollcase Parts
Air cylinders, 24'' portable fan, 6 1/2'' x 24'' rolls with sprockets, deck chain, all parts on pallet

287
Dyna-Glo Deluxe Space Heater
Diesel or kerosene, portable, 50,000 BTU, good condition

287A
Dyna-Glo Deluxe Space Heater
Diesel or kerosene, portable, 50,000 BTU, good condition

287B
Dyna-Glo Deluxe Space Heater
Diesel or kerosene, portable, 50,000 BTU, good condition

287C
Dyna-Glo Deluxe Space Heater
Diesel or kerosene, portable, 50,000 BTU, good condition

287D
Dyna-Glo Deluxe Space Heater
Diesel or kerosene, portable, 50,000 BTU, good condition

288
Remington Space Heaters
80,000 BTU 1 pc., 45,000 BTU 1 pc., 125 propane 1 pc., good condition

288A
Remington Space Heaters
80,000 BTU 1 pc., 45,000 BTU 1 pc., 125 propane 1 pc., good condition

288B
Remington Space Heaters
80,000 BTU 1 pc., 45,000 BTU 1 pc., 125 propane 1 pc., good condition

289
Munsters Sial Space Heaters
40,000 BTU, 3 pc., good condition

290
Space Heaters
2 pc. Masters 75,000 and 135,000, 1 pc. Dura Heat 50,000 BTU

291
Loader Tire Chains
4 pc.

292
Wheelbarrow and Electric Cords

293
Wheelbarrow Loaded with Tools and Parts
ax, air hose, grease guns, tool box, misc. parts

294
Wheelbarrow Loaded with Air Hoses

295
Wheelbarrow Loaded with Tools
wrench sets, socket sets, 125' steel fish tape, grease gun, hard hat, first aid kit, lots of misc. tools

296
Wheelbarrow Loaded with Tools
Fillrite fuel pump with meter, torch, 20 ton hydraulic jack, 2 smaller hydraulic jacks, lots of misc. tools

297
Skid of Supplies
New 24'' Work Station fan, 5 pc. Propane tanks (empty), filters for Komatsu, battery tester,jumper cable # 4 20', Diesel all additive, pump sprayer, 5 case Red # 1 multipurpose grease, washer fluid, antifreeze, WD 40, caulking, SAE 80W-90 gear oil (3 gallons),hand pump for oil on bucket

298
Chain Hoists for Misc. Chains
1 ton chain hoist 1/4'' cable, 1/2 ton chain hoist 1/2'' cable, misc. chains and binders, all parts on skid

299
Saws for Parts
9 pc. Bosch skill saws, 2 pc. Chain saws for parts, oil pump, all items on skid

299A
Socket Set
7/8''- 2'' complete set with 3/4'' drive wrench

299B
Dewalt Grinder
with 46 cutting wheels

300
Motor Oil
6 galons Kawasaki bar and chain oil, 18 pc. 2 stroke oil mixes (5 gallons), 1 1/2 buckets Power Drive fluid 10W for Kommatsu, 1/4 bucket air tool oil, 1/2 bucket 75W-90 oil, propane heater, hand sprayers, misc. oils

301
Log Savers Systems (Skid of Parts)
plastic and metal log saver clips, hammer for clips, Latsch Bacher 4484 Tagging System with hammer and tag dispenser, box of tags, 30 ton hydraulic jack, 2 buckets with tools and parts, Lincoln battery and charger, Propane tank with 2 flame torches

302
Anchor Seal Spray Pump (Skid of Supplies)
Electric sray pump, gas cans, Sunbrite cleaner, hand pump, Dry-o-lite Gas Dry Prime, all parts on skid

303
Skid of Parts
Electrical fuses, roll of plastic sheeting, all parts on skid

303A
Conveyor Belt Fasteners
with alligator tool press

304
Milwaukee Cordless Grease Gun (Items on Skid)
30'' pipe wrench, crimp tools, leaf blower, gas cans, Husquarana 455 Rancher chain saw, condition unknown

305
Electric Cords and Misc. Parts
Dura Heat propane space heater, electric lights and supplies

306
Hydraulic Hose and 5' Saw Bar
all hose on skid

306A
Pacific Hydrostar Water Pump
212CC predator, gas engine with 3'' hose

306B
80,000 BTU Gas Heater
80,000 BTU, 1 hour, heats up to 2,000 square feet,hangs from cieling. Brand new and in the box!

307
Hand Tools
shovels, scraper, cant hooks, all tools on skid

308
Parts and Fittings
Pintle hitch, all parts on skid

309
Electric Heaters
2 pc. 14'' x 21'' heat mat, 1 new heater, 3 used heaters, box fan, Milwaukee cordless drill and driver, chaps, heat bulbs, Power House pressure washer

310
8 Chairs

311
Loader Parts and Skid of Misc. Parts

312
Skid of Hoses
Hydraulic and water hoses, all parts on skid

313
Werner 8' Fiberglass Step Ladder
good condition

314
Werner 6' Fiberglass Step Ladder
good condition

315
Werner 6' Aluminum Step Ladder
good condition

316
Tub Grinder Parts and Hydraulic Oil
3/4 barrel hydraulic oil 46, all parts on shelf

317
Anchor Seal Sprayer System with Honda Gas Motor
Honda GX120 motor, sprayer hose and wand, 3 empty barrels

318
Lockable Storage Cabinet and Tarps and Hoses
Built with 1/4'' steel, 27'' x 27'' x 6', water hoses, 2 pc. Tarps

319
Hand Pumps Broom
work sign, pipe clamp, rake

320
Garden Hose Reel
Shop built on cart fixed for drill power, holds 300' hose, cleaning tub, shop vac

321
Simpson Pressure Washer
Honda GC190 gas motor, hose and wand, good condition

322
Napa 200A Battery Charger and Starter
200A engine start, 60A boost charge, 2A charge, good condition

323
Napa 200A Battery Charger and Starter
200A engine start, 40A boost charge, 6-2A charge, good condition

324
Pro Series Battery Charger
250A engine start 12V, 150A engine start 24V, 150A engine start 6V, good condition

325
Lincoln Ideal Arc Welder 250`
220-480V, MN 250-250, SN 177714, on cart

326
Lincoln AC225 Arc Welder
MN AC225, with extention cord, on cart

327
Western Accu-Flame Cutting Torch
with hose and gauges, tanks on cart

327A
Airco 36'' Cutting Torch (Head Only)

500

327B
Hand Carts
1 pc. 24'' wide with 12'' air tires, 1 pc. 14'' wide with 7'' solid tires

328
Traffic Cones Control Box
3 pc. cones 18'', 4 pc. cones 36''

329
Slip On Tow Motor Forks
5'' x 42'' forks, could be used as quick attach forks

330
Slip On Boom with 2 Attachments
12' boom

331
Steel Plate with Chain
3/8'' x 4' x 8'

331A
*Whit Oak Planks
Approx. 672 board feet of 2''X randem width X 12' 

332
Slip On Loader Bucket
7' x 4' x 4' with slant sides

333
Stacking Rack
76'' x 43'' x 38'''

334
Slip On Loader Bucket
8' x 4' x 4' with slant sides

335
Slip On Scraper
12' x 30'' with 2' sides

336
Bucket fits Kubota Mini Hoe,
4' x 30'' x 30''

337
Skate Rolls
2 1/2'' rolls, 18'' x 10'

338
Used Loader Tires
20.5 R25

339
Loader Dirt Bucket
8' x 40''

340
Slip On Loader Dirt Bucket
92'' x 40''   

341
High Dump Slip On Bucket
3 1/2 yd., 8' x 4' x 4', 

342
Shaft with Sprockets and Bearings
2 pc., 4- 19'' sprockets, 2 11/16'' shaft x 23'

343
Shaft and Bearings
1 7/16'' x 20'

344
Gear Box with Sprockets

345
Frick Track and Frame
45', 38'' C-C 

346
I Beam
3 pc., 3/8'' x 6 1/2'' x 12'' x 23'   

347
I Beam
3/8'' x 6 1/2'' x 12'' x 17' 8''  

348
I Beam
3/8'' x 5'' x 14'' x 24'  

349
I Beam
3/8'' x 8'' x 8'' x 19'  

350
I Beam
1/2'' x 8'' x 14'' x 20'  

351
Steel Sled
1 pc. 5' x 16', 1 pc. 5' x 10'

352
Bridge Steel Frame
2 pc. 6' x 20', side rails

352A
Portable Bridge UPDATED LOT
2 pc. 6' x 30', needs new wood floor, made by ADM Welding
LOT UPDATE New flooring has been added

353
Swamp Mats
12 pc. 4' x 16', 4 pc. 7' 6'' x 12'

354
Steel Pipe
2 pc. 1/2'' x 20'' x 11'

355
Steel Pipe
2 pc. 8'' x 11''

356
Steel Pipe
1 pc. 15'' x 18', 7 pc. 12'' x 7'-18'

357
CTR Circular Buck Saw
60'' saw, direct mount hydraulic motor on saw, SN 610300, hydraulic cyliinder operated, carbide inserted teeth

358
Buck Saw and Bunks
5' bar, hydraulic drive, 16' bunk

359
Belt Conveyor
18'' pan, 6'' sider, 22'' x 18', no drive

360
3 Strand Transfer
10' x 16', no drive

361
Edmiston Portable Sawmill 36'' 4HB
Fully hydraulic, chain tye turner, hydraulic dogs and tapers, 15' carriage, track 34'' C-C, 46' track and frame, 110V over hydraulic set works, panagraph, 20'' x 5' off bear belt, 24'' x 8' outfeed belt, Tong dog, on wheels, 42'' x 48'' cab

362
*Polartec Plus by Snap On Refridgerant Recharger
NOTE: ALL THE REST OF THE ITEMS ARE LOCATED IN THE TRUCK GARAGE approx. 1 1/2 mile up the road just west of the train tracks. MN Polartec Plus A, SN EC1911-259, year 2019, R134A refridgerant, recovery, recycle, recharge station, very good condition

362A
Weitron 134A Refridgerant
1 1/2 tank

363
North Star Performance Pressure Washer
Honda GX390, gas with diesel heater and electronic start, with hose and wand

364
Simpson Pressure Washer
3.5 GPM, 4,000 PSI, Honda GX270, gas, with hose and wand

365
Troy-Bilt Pressure Washer
2.7 GPM, 3,000 PSI, Honda GCV190, gas, with hose and wand

366
Simpson Pressure Washer
2.4 GPM, 3,300 PSI, Honda GC190, gas, with hose and wand

367
3 In 1 Welder
Fabricatoor 252I, mig, stick, and tig welder on metal cart, with 2 auto darkening helmets and 1 canister

368
Lincoln Electric Welder
SN K913858820, weldon power G8000 on performer 16XSL, gas engine, tig welder, meter reads 980 hours

367A
Welding Rods and Wire
4 Boxes 6011 welding rods 
1 roll .35 welding wire 
ALL NEW

369
Cutting Torch
2 tanks on metal dolly cart with gauges and torch

370
cutting Torch
2 tanks on a metal dolly cart with gauges and torch

371
Ingersoll Rand Air Compressor
with single tower van air, air dryer, 7.5 HP electric drive, 80 gallon tank, 2 stage reel not included

371A
2 Retractale Hose Reels
with air hose

372
US General tool Box
includeds all contents, 22'' x 4' x 41'', assorted sockets ranging from 7/8''-5'', 2' ratchets, wrenches, and sleeve pullers

373
US General tool Box
includes all contents, assorted wires, fuses, connector ring, shring tubing, strippers, and zip ties, 3' x 21'' x 41''

374
Parts washer
30'' x 21'' x 3', good condition

375
Kobalt Tol Box
includeds all contents, socket sets, wrenches, channel locks, chizzles, sledges, screwdrivers, 19'' x 41'' x 64'', with built in electric strip

375A
Open End Wrenches
10 mm-32 mm, 1 5/8''- 2 1/2''

377
Retractable Hose Reel

378
Lube Pump with Hose Reel
retractable hose reel with grease sert

378A
Premalube
NLGI # 2 grease, 2 unopened barrels, 1 partially used

379
2 Ton Foldine Engine Crane
SN 367821928, with 5' extended arm

380
2,000 Lb. Transmission Jack
SN 372552049, 10 1/2'' x 6 1/2'' plate

380A
Strongway Pallet Jack
4400 lb. capacity 
Good condition 

381
3 Ton Car Jack

382
Pro Series Car Jack
capacity unknown

383
Air Jack on Wheels

384
Tap and Die Set
Like New! Complete Set!

385
Blue-Point Hex Bit Socket set
87 pieces, Like New! Complete Set!

386
Snap On 1/2'' Digital Torque with Ratchet
SN 1014070486, manual included

387
Snap On Ring Pliers Set
12 pc.

388
Socket and Allen Wrench Sets
13/16''-1 1/2'' sockets, 3/4'' drive, 8mm-19mm Allen wrenches, 3/8'' -3/4'' Allen wrenches

389
Porta-Power
4 ton, 10 ton, 20 ton sets

390
Pro-Logix 12124V Battery Charger
MN PL3760, with engine start

391
Associated Battery Charger
200 amp, 12V, with engine start

392
Shop Vac
5 gallon

393
Husquarna 128LD Weed Wacker
with 2.5 gallon gas jug and partial roll of cord

394
Light Tower and Creeper Cart
commercial electric, 2 lamp light tower, and a snap on creeper cart

395
Werner Adjustable Ladder
300 lb. capacity, 21' ladder

396
Tire Working Safety Cage and Assorted Tools UPDATED LOT
pry bars, cage, sledge, bead setting blaster tank
LOT UPDATE;add wheel balancer weights 10 oz-12 oz.-16 oz.

397
2 Sledges and Pick Ax
10 lb. sledge

398
Assorted Pry Bars

399
Sunex Air Impact
1'' drive with 10'' extension

400
Ingersoll Rand Air Impact
SN A02426917, 90 PSIG, 4,000 RPM, 1'' drive with 10'' extension

401
Hydraulic Bottle Jack
Air powered 

402
Hydraulic Bottle Jack
Air powered

402A
Central Machinery 20 Ton Shop Press
SN 371951522, 26'' x 26'' x 62''

403
Hydraulic Bottle Jack
20 ton

404
Plasma Cutter and Welder
SN 189181200229, Forney easy weld, 180 A., 27V, Chicago Electric Plasma Cutter 40 A., 90V

405
Heater, Microwave, and Creeper
snap on creeper cart, 80,000 BTU Dyna Glo Deluxe kerosene/diesel heater, MN KFA80DGD

406
Milawaukee 1/2'' High Torque Impact
with charger and 5 amp. battery in case

407
Milawaukee 1/2'' High Torque Impact
with charger and 5 amp. battery in case

408
Milawaukee Impact and Drill
with 5 amp and 1.5 amp battery and charger in case

409
Milawaukee 3/8'' Impact and Ratchet
with 1.5, 3, 5 amp batteries and charger. No case.

410
Needle Scaler
4,000 BPM, comes with box, new parts, and manual

411
Ingersoll Rand 261 Series Impact
SN SR21G200312, 90 PSIG, 6,000 RPM, 3/4'' drive, good condition

412
Mini Angle Die Grinder Kit
2 mini die grinders with assorted wheels and brushes and manual, very good condition

413
Air Grinder and Ratchet
chief extended die grinder, SN 375351852, Ingersoll Rand 3/8'' drive air ratchet

414
Porter Cable Heat Gun
120V, 1,500 W

415
Storm Torque Wrench
SN 2016069771, 3/4'' drive, 100-600 FT16

416
Bosch CS10 Circular Saw
SN 903051940, corded, good condition

416A
Bosch CS10 Circular Saw
SN 706000473, corded, good condition

417
Slack Adjuster Kit
with organizer, box of wires, connectors, and zip ties

418
Centech Digital Inspection Camera
2' long camera extension

419
Bosch Oscillating Sander
SN 111005457, good condition

420
Ingersoll Rand Air Chisel

484
Master Force Drill
SN 20190101

485
Bosch RS325 Sawzall
with new metal and wood blades

486
2 Dewalt 4'' Angle Grinders

487
Dewalt 7'' Angle Grinder

488
Dewalt 7'' Angle Grinder
SN 023624

489
2-12 Ton Jack Stands
minimum height 19''

490
3-16'' Jack Stands

491
2-15'' 6 Ton Jack Stands and 2-11'' 2 Ton Jack Stands

492
Air Hoses
with funnels and 28'' zip ties, shop chair

493
Truck Seat
good condition

494
Assorted Pallet
asssorted fuel jugs, tow strap, extension cord, welder extension, air hose

495
3' Countyline Fan

496
Wooden Work Bench
with electric strip, bit sets, grinding wheels, vice grips, 2 clamps, and all contents

497
Work Bench
with table grinder and vice, all contents included

498
Assorted Pallet
Earthquake 1'' drive air impact, 3/4'' air impact, U joints, 3/4'' bolts and nuts

499
Assorted Pallet
2 refridgerant pumps, 245I HP fan alternator, 2 power take offs, tool box, and electrical starter

500
Clean Burn Heater
MN CB3250, SN 12239, 2,598 hours, used oil heater, 300,000 BTU, includes pump unit on tank

501
Oil Tank
13' x 4' tank approx. half full of used motor oil
 

502
Fuel Tank
5' x 27'' x 44''

503
Steps and Platform
6' x 4' x 2'

504
Steps and Platform
6' x 4' x 2'

505
Carted Oil Catch
2' x 3' x 10'', with hand pump for 5 gallon bucket

506
Filing Cabinet and Mini Fridge
works

507
Metal Shelf
173'' x 34'' x 151'' with contents

508
Metal Shelf
126'' x 42'' x 120'', contents not included

509
Metal Shelf
173'' x 34'' x 100''

509A
Metal Shelf
8' x 42'' x 10'

509B
Metal Shelf
76'' x 2' x 6' with tarps

510
20' Extension Ladder
20', capacity 225 lb.

511
Grease Tubes
approx. 120 multi purpose # 2 grease

512
Diesel Anti Gel
8 bottles of anti gel and 13 bottles of 80W-90 gear oil

513
Anti Freeze
11 gallons of pre-mixed anti freeze

514
Air Filters

515
Wheelbarrow with Tools
with 3 extension cords, jumper cables, 4' level

516
Assorted Pallet
3 tire chains, cutting torch

517
New Battery 12V Battery
1 pc. New battery 
925 cca.
threaded posts 

518
Interstate Battery 12v
Starting battery was installed some in 2020. 
1pc.
950 cca.
Still useable 
Threaded posts 

519
Interstate Battery 12V
Starting battery was installed some in 2020
Still useable
1pc. 
950 cca
Threaded posts.

520
Interstate 12V Battery
Starting battery was installed some in 2020
Still useable 
1pc. 
950 cca.
Threaded posts

521
12V Batteries
Starting battery
used 
650 cca.
Threaded posts
4 pieces
1 pc. 925 cca.

522
12V Batteries
Starting battery
Used 
925 cca
Threaded posts .
5 pieces
 

523
2 Boxes of New Bungy Cords
Tarp straps 

524
Assorted Pallet
open end wrenches, crimp kit, assorted chains, manual air hose reel, rope, wooden stakes, shop vac hose

525
Assorted Pallet
rubber belt, LED shop light, Lincoln grease gun, exterior light fixture, radio

526
Assorted Pallet
New chain flags, hard hats, arm rests, high vision vests

527
3 Barrel Shelves and barrels
With 3 barrels of anti freeze and 13 empty barrels 

528
Brake Shoes and drums
10 sets, 3 brake drums

529
Brake Shoes
25 sets

541
Cargo Locks
with canopy bars and mounts

530
Metal Cart
with barrels and funnels

531
2 Piece Tire Chain Set
for Volvo wheel loader, 10' x 30''

532
2 Piece Tire Chain Set
11' x 30''

533
Bolt Bin
with contents of 1/4'' -1' bolts, nuts, lock washers, flat washers

534
All hydraulic hoses on rack
Some new hoses to fit Serco knuckleboom loaders,includes allhoses on rack

535
International Tie Rod
1 pc with knuckle ends 

536
2 Peterbilt Tie rods
1 new and one used with knuckle ends

537
Peterbuilt Doors
Nice condition 

538
Semi Bumper
T800

539
Assorted Pallet
organizer bin with contents of elbows and nylon tubing, hose mounts

540
6' Steel Ramps
6' x 9''

542
Deck Plates
34'' x 24'', 19'' x 34'', 22'' x 24''

543
Semi Air Hoses

544
Protech Boxes
2'' x 3'' x 2'' with 27'' x 11'' step

545
2 Boxes and Mounts
3' x 18'' x 18'' with box mounts and 32'' x 18'' air intake

546
Assorted Pallet
paint supplies, mouse traps, buffing wheel

547
Fuel Tank and Mounts
40'' x 2' fuel tank

548
Pallet of Assorted Belts

549
4 Tire Chains

550
2 Ladders
8' ladder and 24' extension, 225 lb. capacity

551
Assorted Pallet
assorted hydraulics hoses, hydraulic motor, 12'' belt

552
Assorted Pallet
Craftsman tool box with drills, roll pins, bucksaw chain hydraulic hose and motor, assorted bolts, nuts, and washers

553
Assorted Pallet
oil filters, air filters, extension cord, tarp, and air hose

554
Pallet of Binders
Brand new web binders, tie down straps, chain binders, ratchets

554A
Strap Ratchet Handle
LOT UPDATE 
2 pc used 

554B
Strap Ratchet Handle
1pc., New!

554C
Strap Ratchet Handle
1 pc., New!

554D
Fifth Wheel Pin Pull Handle
1 pc. New

554E
Fifth Wheel Pin Pull Handle
1 pc. New

554F
Fifth Wheel Pin Pull Handle
1 pc. New

554G
1pc Ratchet Handle 1 pc Pin pull handle .Used*

554H
1pc. Ratchet Handle 1pc. Pin Pull Handle Used*

554I
1pc Ratchet Handle 1pc. Pin Pull Handle*

554J
1pc Ratchet Handle, 1pc Pin Pull*

554K
2 Ratchet Handles, 1pc Pin Pull Handle. Used*

555
Assorted Pallet
lug nuts, chrome covers, creeper cart, stud bolts

556
Assorted Pallet
steel line, gaskets, fuel filters, injectors

557
Hand Pumps and Gear Oil
unopened trans axle oil and 4 hand pumps

558
Assorted Pallet
hose clamps, radiator fans, hydraulic fittings, coolant hose

559
Chrome Exhaust Pipes

560
Assorted Pallet
springs, u-bolts, air hose, steel mounts

561
Hydraulic Pump and Brooms
Rebuilt hydraulic pump for Prentice knuckleboom loader on Osh Kosh truck,or will fit any Prentice loader 

561A
Brooms and Shovel

562
Chain
1 pc. 1/2'' x 10', 1 pc. 1/2'' x 20'

563
Misc. Chains
12 pieces

564
Assorted Pallet
parts for Serco 8500 loader, 43'' hydrulic cylinder, rubber seals, 20'' dual threaded bolts,seals fit 1050 and 8500

565
Steel Work Bench
6' x 3' x 3' with Dewalt bench grinder and a Colombian 4 1/2'' vice

566
Pipe Threading Kit
3/8''-2'' bits, threading oil and threading tool

567
Assorted Pallet
Reese tow power 1 ton hoist, cleaning supplies, 31 cans of brake cleaner

568
Truck Parts
steering wheels, mirrors, air horn, seat belts

569
Assorted Pallet
head lights, running lights, and trailer lights

570
Assorted Pallet
shocks, wheel bearings, brake adjusters

571
Assorted Pallet
air shocks, filters, hub seals, wheel seals, gaskets

572
Assorted Pallet
fans, wheel bearings, U bolts, mount brackets

573
Assorted Pallet
fire extinguishers, garden sprayers, caution reflectors, filing cabinet, trailer lights

574
Mud Flaps and Hose Clips

575
Air Suspension Mounts and Hitch Pins
Peterbilt parts

576
Truck Springs and Diesel Mate
36 bottles of diesel mate

577
Assorted Pallet
assorted lights, air suspension, water valves, fuel transfer box kit

578
Assorted Pallet
grease surts, 34'' x 4'' roller, 2 pc., 18'' x 8'' roller, hydraulic valves, electric outlets and sockets

579
Thrust Bearings
2 barrels of used anti freeze

580
Assorted Pallet
3 turbos, oil pump, steering pump

581
Assorted Parts
U joints, rubber shocks, grease caps, bearings, brake tensioners

582
Assorted Lights
trailer plugs, trailer lights, running lights, liscense plate lights, pin plugs, 2'' chrome plastics, LED lights

583
Caterpillar Head
Used head. 
2 pc. New spring leaves

584
4 Tires
P265165R18

585
Wooden Shelf
New fender mounting kits, 51'' x 28'' x 6'

586
Detroit Diesel Series 60
12.7 series 60 , 400 hp. Running good when taken out

587
W900 Front Drive Axle
 completely rebuilt, new yokes,wheel hubs 

588
Disassembled Axle
axle housing with leaf springs, fits 2001 Freightliner

589
Semi Hitch Mount
mount plate size 50'' x 39''

590
Assorted Pallet
cutting torch set, tie down straps and ratchets, manual oil pumps, 2 rolls of plastic

591
Assorted Pallet
PTO gear box, hydraulic motor transformer, gear fork and cover, spigot caps

593
New Fan Clutch Rebuid Kit

594
Rotating Electrical Contron
for the rotating point on a knuckleboom

595
Brake Drums
2 Brake drums with 2 brake shoe sets, fit on Freightliner Cascadia

596
New Brake Drums LOT UPDATE
For steer axle
UPDATE only 2pc 

596A
UPDATE ADDED LOT 4pc Brake Drum*
For steer axle or tag axle rated 20,000pds.

596B
UPDATE ADDED LOT 6pc*
Brake Drum for drop axle rated for 13,500 pds

596C
UPDATE added lot,6pc Brake Drum*
Same as lot 596B

596D
UPDATE added lot 5pc Brake Drum*
Same as lot 596B

597
3600AX Brake Drums
4pc New Brake Drums 

618
2 Tires
425165R22.5, recaps

597A
Brake Drums 3600AX
NEW 4pc

597B
Brake Drums 3600AX
NEW4pc 

598
LOT UPDATE Lot removed
New 3600AX Brake Drums
3pc.

598A
Brake Drums 3600AX*
NEW 4pc

598B
Brake Drums 3600AX*
NEW  4pc 

598C
Brake Drums 3600AX*
NEW 4pc 

598D
Brake Drums 3600AX*
NEW  4pc

598E
Brake Drums 3600AX*
NEW 3pc

599
3 Wheel Wells

600
Oil Filters

601
Oil Filters

602
Oil Filters and Air Filters

603
Oil Filters
for Serco loaders

604
Tank Tap Hand Pump
barrel hand pump

605
Gibson Refridgerator and Contents
air tight storage for chemicals and welding supplies

606
Radiators
3 radiators 28'' x 3', 1 oil cooler 21'' x 34'', box of electrical wrap

607
Used Rims
3-22.5'' aluminum rims, 1-24.5'' steel rim

608
New Steel Rims
2-W24.5'' x 8.25'', 4-W22.5'' x 8.25''

609
Rims
9-22.5'' aluminum rims

610
Rims
9-24.5'' aluminum rims

P813489N

611
4 Tires
4-11R24.5, used

612
4 Tires
4-11R24.5, used

613
4 Tires
4-11R24.5, recaps

614
4 Tires
4-11R24.5. recaps

615
4 Tires
4-11R24.5, recaps

616
3 Tires
11R22.5, 11/32 tread depth, virgin rubber

617
2 Tires
virgin rubber, 295/75R22.5, 10/32 tread depth

619
2 New Tires
315/80R22.5, New!

620
2 Tires
425/65R22.5, recapped

621
Tire
New!, 425165R22.5

622
Tire
New!, 315/80R22.5

623
5 Tires
5 pcs., 295/75R22.5, recaps
LOT UPDATE; add 1 tire , 6 pc total

624
3 Tires
3 pcs., 275/80R22.5, recaps
UPDATE LOT;add 1pc.same size with Trailer tread,4pc total

625
3 Tires
11R22.5, 3 pcs., recaps

626
4 Tires
11R225, recaps

627
6 Tires
virgin rubber, 255/80R22.5, 6 pcs.

628
6 Tires
255/70R22.5, 4 pcs., recaps
LOT UPDATE; add 1 tire same size with rim

629
4 Tires
295/75R22.2, 4 pcs., recaps

630
4 Tires
11R22.5, 4 pcs., recaps
LOT UPDATE; add 2pc ,6pc total

631
2 Tires
recap, 315/80R22.5, 2 pcs.
LOT UPDATE: only 1 tire left

632
6 Tires
295/75R22.5, 6 pcs., recaps

633
6 Tires
11R24.5, 6 pcs.
UPDATED LOT; add 1pc ,7pc total

634
Plastic 55 Gallon Drums
13 empty drums

635
Sawhorses
2 pc., steel, 36'' x 36'' high

636
Treated Plywood
3/4'' x 4' x 8' and some smaller pieces

637
Driveway Cloth*
12'x approx.300'  new
Gallery Images Loading, Please Wait...
  • Home
  • Hire an Auction Company
  • Add Your Auction Company
  • Member Login
  • Contact Us
  • Desktop Site
Return
Williamsfield Valley Veneer
 Live Auction
 
Auction Date(s)
Wednesday Sep 21, 2022 Completed
Auction Location

Williamsfield, OH 44093
Company
Bright Star Realty and Auctions, INC

Contact: Loren Beachy
Phone: 574-825-0704
Website: brightstarauctions.com

Listing Terms and Conditions
There is a 13% online buyer’s premium in effect for all purchases. All items sell where is as is with no warranties or guarantees. Buyer is responsible to inspect all merchandise prior to placing bids. All items must be paid within 7 business days. Payment terms: Cash, check, wire transfer, or any major credit card. ($2,500 limit applies to credit card payments.). All items are pick-up only. Smalls must be removed within 2 days. All items must be removed within 60 days. Loadout  terms 45 days on installed items and 1 week for uninstalled. Please call agent for more info. Buyer shall assume responsibility of all property when auctioneer says sold. Auction company is not responsible for any missing or stolen items.

 

 

 

 

 

 

 

Bidder Terms and Conditions

These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer.
 
  1. Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
 
  1. Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded, where required, as follows:
IN, IL , WI , KY , OH , VA , AR , NY, NC, TN, MO .
 
  1. Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer: “Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction. “Absentee Bidder” means a person or entity that submits an Absentee Bid.
“Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION.
“Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids.
“Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected and where a Buyer may pick up Personal Property.

“Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder.

“Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms.

“Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer.
"Buyer" means the Winning Bidder with respect to each Lot of Personal Property or of each parcel of Real Property.
"Buyer's Premium" is an amount with respect to each Lot of Personal Property or with respect to each parcel of Real Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account. For Real Property offered Subject to Seller’s Confirmation, the Buyer’s Premium will be calculated on the amount of the High Bid Subject to Confirmation.

“Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property or Real Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation.

“Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer.

“High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot or on a parcel of Real Property.

“High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on Real Property put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price.
 
“High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot or a parcel of Real Property.

"Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event.

“Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer.

“No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale.

“Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions.

“Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online.

"Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered.

“Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers.

“Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer).

“Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms- length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction.

“Property” means the Real Property and the Personal Property.

“Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium. "Registered Bidder" means a person or entity that has registered to bid at the Auction.

“Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction.
“Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE.

“Reserve Price” means the minimum price that Seller is willing to accept for specific Property.

“Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer.

“Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid.

“Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by
Seller).

"Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid.

“Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction.

“Without Reserve” means Absolute.
 
 
  1. Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.
 
  1. Auction Conducted in the State of Indiana.
 
    1. For Auctions in the State of Indiana and Online. All Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are entered into in the State of Indiana, all bids and payments are received in the State of Indiana, and the Realty Purchase Agreement, if any, will be formed and entered into in the State of Indiana.
    2. For Auctions outside of the State of Indiana. All Property is offered for sale in the state of the Auction Site, and will be sold in the state of the Auction Site. Notwithstanding the physical location of any Bidder or any Participant, these Terms are entered into in the state of the Auction Site, all bids and payments are received in the state of the Auction Site, and the Realty Purchase Agreement, if any, will be formed and entered into in the state of the Auction Site.
 
  1. Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.

The Buyer’s Premium for Personal Property will be amount equal to thirteen percent ( 13%) of the Hammer Price for each Lot Knocked Down at the Auction.

The Buyer’s Premium for Real Property will be amount equal to percent ( %) of the Hammer Price for each parcel of Real Property Knocked Down at the Auction.
 
  1. Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
  2. Nature of the Auction.

X The Auction for the Personal Property is an Absolute Auction.

The Auction for the Personal Property is With Reserve. Auctioneer may Withdraw any Lot offered With Reserve prior to the Fall of the Hammer.
 
  1. Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
 
  1. No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
 
  1. Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
 
    1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
 
    1. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
 
    1. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
 
    1. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
 
    1. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
 
    1. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
 
    1. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
 
    1. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.
 
    1. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties,
(i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
 
    1. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
 
    1. No Reduction or Retraction of Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.
 
    1. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.
 
    1. Online Bids. Online bids may not be reduced or retracted.
 
  1. Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). Absentee Bids may be initiated and advances in accordance with Auctioneer’s policies and procedures. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
 
  1. Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
 
  1. Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
 
  1.  
 
  1. Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
 
  1. Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot or item of Personal Property or each parcel of Real Property will be the Buyer of such Property.
 
  1. All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
 
  1. Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
 
  1. Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.
 
  1. Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or
representation by Auctioneer
 
  1. Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
  1.  
Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
 
  1. Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ring man, or multiple bid assistants or ring men, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
 
  1. Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the

vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
 
  1. All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
 
  1. Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked- Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
 
  1. Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases must be paid for within five (5) days after the close of the Auction. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.
 
  1. Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Disassembly and removal shall be done in a workmanlike manner, and each Buyer shall indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer's employees, agents, representatives, or independent contractors, in connection with the disassembly or removal of any Personal Property. Any and all damages to the Auction Site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller.
 
  1. Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them.
 
  1. Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.
 
  1. No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
 
  1. Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
 
  1. Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.




 
  1. Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled
to specific performance or other equitable relief.
 
  1. Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
 
  1. Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
 
  1. Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
 
  1. Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
 
  1. Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
 
  1. Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim, suit or cause of action relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
 
  1. Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their respective rights hereunder.

 
This will be a nice sized  auction with some very good rolling stock

00
Information Lot
Complete liquidation of Williamsfield Valley Veneer in Williamsfield, Ohio, including HMC carriage, Precision chipper, Brewco Big Band Resaw, multiple Komatsu wheel loaders, Kenworth log truck, multiple chip trailers, and much more. 
QUESTIONS CONTACT EUGENE 260.350.8953 
LOADOUT: All uninstalled items MUST be removed within 10 days. Rolling stock MUST be removed within 10 days. Loadout is available on all items. 45 days for removal of installed equipment. Rigging is available. 
TRUCKING/SHIPPING: is available for all items by calling  Darrin at 574.349.8485 

98
Manual Sealless Steel Strapping Tool
Model A333, works for 1/2" 5/8" or 3/4" banding, new in box. Shipping available for $30

3

99
Heavy Equipment Key Set 39 Keys
Shipping available for $20

100
Milwaukee Cordless Grease Gun
New in case with battery and charger, 18V, MN 2646-20

101
Milwaukee Cordless Grease Gun
MN 2646-20, 18V, charger and 1 battery, good condition

102
Milwaukee Cordless Fuel Impact
MN 2864-20, 18V, 5.0 amp battery, charger, 3/4'' square ring

103
Milwaukee Cordless Fuel Impact
MN 2767-20, 1/2'' square ring, 18V, 5.0 amp battery, no charger, good condition

105
Milwaukee Cordless Fuel Impact
MN 2763-20, 18V, square ring 1/2'' drive, 2 pc. 5.0 amp batteries, charger, good condition

106
Dewalt Reciprocating Saw
MN DW304P, some new blades

107
Encore Steel Strapping and Crimper
MN EP-1425 (tensioner), MN E1850-01-A (crimper), NEW!

107A
FSI Jett Tally (Handheld)
hydrus chain tally, includes charger and computer

107B
Honeywell Lumber and Log Tally (Handheld)
MN 99EXLO, includes charger and computer cable

107C
40'' Grading Sticks
2 pc., New!

107D
36'' Grading Sticks
3 pc., New!

107E
42'' Lumber Marker , 32'' Tree Scale Stick, 36'' Grading Stick
(Used)

108
Ridgid 14'' Metal Chop Saw
3 extra blades, good condition

109
Lincoln Cordless Grease Gun
MN 1880 power luber, includes 2 batteries and charger, good condition

109A
Lincoln Cordless Grease Gun
MN 1880 power luber, includes 2 batteries and charger, good condition

109B
Lincoln Cordless Grease Gun
MN 1880 power luber, includes 2 batteries and charger, good condition

109C
Lincoln Cordless Grease Gun
MN 1880 power luber, includes 2 batteries and charger, good condition

110
Husqvarna Chain Saw
MN 576 x P, X-Torq, 24'' bar, wooden box with lid, good condition

110A
Husqvarna Chain Saw
MN 372 x P, X-Torq, 20'' bar, good condition

110B
Husqvarna Chain Saw
MN 572 x P, 19'' bar, good condition

110C
Husqvarna Chain Saw
MN 576 x P, 19'' bar, good condition

111
HMC Debarker
4' x 7' operator cab with controls,10 HP electric on hydraulic, 40 HP electric motor on head, cable and pulley head carrier, MN V206HST, SN 352-86, 3'' x 24'' bull wheels, 13' bull wheel length, barn sweep connected to debarker, bull wheel bearings show some wear, control box (no wiring), air kick off, hydraulic barrel with pump

112
3 Strand Log Deck
10' x 18', Tulsa gear box, hydraulic drive, stop and load

113
HMC 4-Head Block Carriage
16' x 6', air dogs and kickers, tongue dog, bottom cant kickers, electric, set works, 5 axle, 10'' wheels, panaraph arm, MN AC40BD, SN 530-93, controls in cab, 1st Lot of an Entirety

114
HMC Carriage Drive and Feed
50 HP electric motor, 5/8'' cable, 20'' idler pulley, control valve in cab, MN HD-40, SN 460-93, good condition

115
Track and Feed
45'' center to center, 50', 22'' high, welded on I beam in floor

116
HMC Husk
56'' husk, 7' 6'' x 5', 30'' top saw, 20'' x 5' 6'' off bear belt, 16'' belt, 30 HP electric motor on top saw

117
Lincoln Electric Motor
125 HP, 445T frame, 1,185 RPM, starter control box, no wiring, SN 1981760

118
HMC Saw Cab
4' x4' x 6' high, A/C and heater, camera screen, extra seat

119
HMC Entirety
Lots #113-118 with a 10% raise

119A
HMC Carriage Drive
includes drum and cable, 50HP electric motor on drive pump, Hydraulic drive motor has been swapped out, needs repaired.

120
HMC Log Turner
46'' hydraulic drive, extra chain, control valve in cab

120A
HMC Hydraulic Pack
15 HP electric motor, no hydraulic lines

121
4 Strand Log Deck
11' 6'' X 20', 4' nose skids, Tulsa gear box, hydraulic drive, no control valve, cut off saw

122
Blower
15 HP electric motor, 24'' blower, 10'' inlet, 8'' outlet, includes 10'' pipe to saw

123
Mellot Rollcase and Pop-up Deck
32'' x 22', 6 1/2'' x 24'' rolls, 24'' roll spacing, electric drive, board stop switch, pop-up transfer deck with foot switch, 4 strand, 12' x 6 1/2'', extra chain, electric drive

124
Mellot Rollcase
36'' x 12', 6 1/2'' x 24'' rolls, 24'' spacing, no power, no drive

125
4 Strand Transfer Deck
10' x 9', foot switch, electric drive, pop up, board stop, breaker box, roof top style chain H78

126
Reckart Edger
2 moving saws, 3 stationary saws, 6'' x 42'' capacity, 4' x 9' infeed table, 21'' saw blades, 50 horse electric motor, SN 134, Size R612, 3 laser lights, side press bars, hydraulic cylinder, 4' x 9' outfeed belt, 10 HP electric hydraulic pack

126A
Laser Lite*
Model L-30-R W/mounting arm  [Rebuilt]

126B
Laser Lite*
Model #L-20-R    [Rebuilt]

126C
Laser Lite*
Model #L-10-R     [Rebuilt]

126D
Laser Lite W/Mounting Bracket*
Model# L-30-R    [Rebuilt]

127
Saw Dust Transfer Belt
17'' x 10', electric drive, air cylinder

128
Blower
24'' blower, 10'' inlet, 8'' outlet, 15 HP electric motor, includes 10'' pipe to edger

129
Transfer Belt
16'' x 26' with electric drive

130
Side Transfer Belt
16'' x 7' with electric drive

131
Precision Chipper 1st Lot of an Entirety
# C-2189, chipper size 48-11, 3 knives, 100 horse electric motor, includes pipe to cyclone, includes set of New bolts

132
Shaker Screen
5 x 5, # S-1667, includes 4' cyclone

133
Chip Blower
E-36KW, #108254, dual loading chutes, Phelps, 20 horse electric motor

134
Fines Blower
24'' blower with 10'' inlet, 8'' outlet, includes 10'' pipe to blower, 15 horse electric motor

135
Entirety 131-134
Precision Chip pack, with a 10% raise

136
Vibrating Conveyor
Mellot, 25'' overall width, 6' x 10' slide pan, 18 1/2'' pan, 4'' sides, 21' with chipper adapter, electric drive

137
Rollcase
28'' x 21', 5 1/2'' x 20'' rolls, switch blade for pop up transfer, some spiral rolls, electric drive

138
4 Strand Transfer Deck
12' wide x 19' long, hydraulc drive, includes control box, 4 strand pop up transfer (6' 6''), electric drive, pop up rolls for cant transfer, includes control box, 20'' x 16', 6 1/2'' x 12'' rolls

138A
Hydraulic Pack
5 horse electric

139
4 Strand Transfer Deck
10' x 22', roof top chain, 4' slant deck for side loading, electric drive

140
*4 Strand Green Chain (Reckart)
10' x 6'' x 45', elelctric drive

141
Mellot Transfer Belt
27'' x 53', 28' flat, 25' on incline, elecrtic drive, 23'' pan, 22'' belt

141A
Skate Rolls
18'' x 10', 2 1/2'' rolls

142
Transfer Belt
electric drive, 24'' x 13'

143
Brewco Big Band Grade Resaw
# BD0003, 1 3/4'' x 40'' wheels, Press downroll with air cylinder, MN E1620 (runs 2'' bands), 40 horse electric motor, computerized control center, lubricating system, 12'' x 112'' feed belt-hydraulic drive, 14'' x 16'' capacity. 1st lot of an entirety.

144
Brewco Run Around System
hydraulic drive, controlled by main control panel,includes air supply tank (2 hydraulic packs), oil cooling radiator

144A
*Reckart Blower
NOT PART OF ENTIRETY 15 HP electric motor, 24'' blower, 10'' inlet, 8'' outlet, includes 6 flex pipe to blower

144B
*Pennsaw-AM Oil
NOT PART OF ENTIRETY 5 full buckets, 2 part buckets

145
Brewco Big Band Entirety
Lots #143 - 144

146
Set of Band Saw Wheels
1 3/4'' x 40'' wheels

147
Set of Band Saw Wheels
1 3/4'' x 40'' wheels

148
Cabinet and Contents
Tools and supplies for resaw, 36'' x 24'' x 6' cabinet

149
Shelf and Contents
Hydraulic motors, New belts, includes wooden box and used belts and Tyvar plates (5 pc.), 2'' x 60'', parts and misc. for run around

150
New Saw Blades
20' x 4'' x 2'' x .005 x .740, 30 new blades, 290 used and resharpened bands

150A
Saw Blades
60 pieces used and not resharpened

150B
Saw Blades
40 pieces used and not resharpened

151
ITT Reznor Heater
electric fans, natural gas heater

152
Ingersoll Rand Air Compressor
480 3 phase MN 7100, SN NAR10203995, 15 HP electric motor, with control box, no air lines incuded

153
Hankison Air Dryer
MN DH60, # 3332-2-9808-280, 110V, 60 SCFM at 100 PSIG

154
Ingersoll Rand Air Compressor (New in 2020)
480 3 phase MN 7100, # NAR10617246, 15 HP electric motror, 120 gallon tank, with electric cut out, no air lines included

155
Ingersoll Rand Air Compressor
480 3 phase MN 7100, NAR10203940, 120 gallon tank, with electric cut out, no air lines included

155A
Gardener Denver Air Dryer
SN 1000002964412, MN DGHB-115, single phase 110 plug in, 115SCFM@100PSIG, filters for dryer, ativated alumina, Hankison Centrifugal separator MN MS400D, auto drain

155B
Air Cooling Radiator
42'' x 23'', electric motor, lines with bypass valves

156
Fans
36'' portable fan, 14'' fans on stand x 2

157
Saw Blade
F8 style, 56'' good condition

158
Saw Blade
B style, 56'', good condition

159
Saw Blade
F8 style, 56'', good condition

160
Saw Blade
B style, 56'', good condition

161
Saw Blade
F8 style, 56'', good condition

162
Saw Blade
B style, 56'', good condition

163
Saw Blade
B style, 56'', good condition

164
Saw Blade
B style, 56'', good condition

165
Saw Blade
B style, 56'', good condition

166
Saw Blade
B style, 56'', broken shoulder

167
3 Saw Blades
56'', damaged

168
4 Lumber Carts
42'' x 6', steel wheels and 38'' posts, 2 x 2 tubing frame

168A
3 Lumber Carts
42'' x 6', steel wheels and 38'' posts, 2 x 2 tubing frame

169
4 Lumber Carts
2'' x 2'' tubing, 42'' x 6', steel wheels

169A
3 Lumber Carts
2'' x 2'' tubing, 42'' x 6', steel wheels

169B
3 Lumber Carts
2'' x 2'' tubing, 42'' x 6', steel wheels

169C
3 Lumber Carts
2'' x 2'' tubing, 42'' x 6', steel wheels

170
Quad Release Ice Melt
13, 50 lb. bags

171
2 Fans
24'' floor stand, 28'' floor stand

172
6 Fans
in green chain building

172A
24'' Fan
electric, mounted on wall mount, swing arm

173
Cable and Pulley System
cable and pulley system for cord carrier, 2- 50' cords

173A
Water Tank and Pressure System
250 gallon water tank with pressure pump, includes pipe line along greenchain walls, was used to spray lumber stain control.

174
Lights
plug in lights, 2 pc.

175
6'' PVC Pipe
all 6'' pipe going to dust bin, approx. 300'

176
Cox Reels Air Hose Reel
retracting 1/2'' hose

177
Tool Lot
Brooms, shovels, mite, cant hooks

178
Tool Lot
Brooms, shovels, scraper, cant hooks, fork ax

179
Tool Lot
Brooms, shovels, fork , hoe

180
Tool Lot
Brooms, bars, fork, shovel

181
Tool Lot
Brooms, shovels, rakes

182
Banding Tools
6 tighteners, 6 crimpers, 3/4'' clips

183
3/4'' Banding
3 New rolls

184
Banding Cart with Roll of 3/4'' Steel Banding
1 1/2 gallon pump sprayer, gas cans

185
Chains
1 pc. 3/8'' x 20' with hooks, 1 pc. 1/4'' x 20' with hooks

186
Lumber Cart, Lights, Polyboard, and Banding Cart
lumber cart with 4 posts, 44'' inside, 6' long, 1 pc. 1/8'' x 4' x 8' poly board, 1 pc. 1/8'' x 24'' x 70'' poly board, 2 flourescent lights, 2' x 4', tarp, banding cart with 3/4'' steel banding

187
Parts for HMC Carriage
Air cylinders, New bearings, lots of misc. parts

188
Saw Sharpener Shanks and Teeth
2 hanchet Jockey grinders, (1 like New), some new and used saw shanks and teeth, laser lites, saw wrenches, New grinding stones, Jockey grinder for parts, MN 06H

189
Roller Chains
lots of used chains, 4 boxes of New RS60RIV

190
Belts and Sprockets
Skid of used belts and sprockets, sledge, shovels and broom

191
Capacitor Bank
in close to new condition.

191A
Office Desk and File Cabinets
knee hole desk, 2-2 drawer file cabinets, 20'' x 48'' desk
LOT UPDATE; knee hole desk was removed and 2pc file cabinet added.
1pc 15''x35''x5' w/4drawers
1pc 14''x18''x44'' w/3drawers including first aid supplys

191B
File Cabinets*
2pc 15''x35''x5'     good condition 

192
Office Chair and Aluminum Ladder
20' aluminum extension ladder, 8' wooden step ladder

193
Shop Vac
10 gallon

194
General Electric Motor
40 HP, frame 364TS, 1180 RPM

194B
#5 Soft start
good condition

195
Lincoln Electric Motor
150 HP, Frame 444T, 1780 RPM

196
2 Electric Motors
Baldor 40 HP, 324T frame, 1780 RPM, General Electric 30 HP, 256T frame, 1755 RPM

197
Used Belting and Cable
used cable, skid of used belting, various sizes

198
15 HP Electric Hydraulic Pack Mac Neil
50 gallon tank, SN 19589100, MN K11596

199
Cat Claw Band Sharpener and Setters
looks complete, 2 Cat Claw hand setters, extra parts

200
Automatic Band Saw Setter
made in the US, electric drive

201
Steel Scrap Pile
on side of building, 55 gallon barrels full of steel

202
New Steel
2 pc. 2'' x 4'' x 24' square tube, 5 pc. 2'' x 2'' x 20' angle, 1 pc. 2'' x2'' x 6'' x 18' c-channel, 1 pc. 1 1/4'' x 1 1/4'' x 3'' x 20' c-channel, 1 pc. 1/4'' x 4'' x 20' flat, 1 pc. 3/8'' x 4'' x 20' flat, 1 pc. 1/2'' x 1'' x 20' flat, 1 pc. 3/8'' x 2'' x 13' flat, 1 pc. 1/4'' x 1 1/2'' x 2 1/2'' x 20' angle

203
New Steel
1 pc. 2'' x 4'' x 11' square tube, 1 pc. 3/8'' x 4'' x 6'' x 10' square tube, 1 pc. 1/4'' x 6 1/2'' x 6' pipe, 1 pc. 1/4'' x 6 1/2'' x 7' pipe, 1 pc. 1/4'' x 6'' x 6'' x 11' square tube, misc.smaller pieces, 3/8'' x 5'' x 8'' x 9' I beam

204
Treated 6'' x 6'' Posts
2 pc. 6'' x 6'' x 14', 1 pc. 4'' x 4''x 9'

205
Loader Forks
6'' wide

206
Ingersol Rand Air Compressor and Dryer
SN NAR10203440, MN 7100, 15 HP, electric, 120 gallon tank

207
Air Compressor
10HP, electric, 80 gallon tank

208
Michigan Knife Grinder
SN 1163, MN 48, chipper knife grinder, holds 4 knives,size 48, new parts

209
Chipper Knives
lots of used knives, bolts and parts, 3 pc. NEW 14 3/4'' counter knives, 6 pc. New 4'' x 14 3/4'' knives

210
Babbit Melting Pots and Knife Jig
3 hand held melting pots (electric), 1 knife jig, tools

211
Shelf and Cabinet with Parts
5 drawer cabinet with parts, snap rings and o-rings, shelf with parts, electrical parts, 2 pc. Ingersol Rand 1/2''-20V cordless impact (broken) dri Micro meter

212
Barrel Top Parts Washer
can fluid

213
Central Machine Metal Cutting Band Saw
1/2'' band, 4'' x 6'' capacity

214
Delta Rockwell Drill Press
8'' stroke, 1/2'' chuck

215
Bench Top Grinder
6'', mounted on pedestal

216
Steel Workbench 5'' Vise
clamps, open end wrenches, bench grinder with wire brush, all tools and parts on workbench, 28'' x 9' with 3/8'' top

217
Shelf with Welding Supplies
welding helmets, jackets, and rods, 36'' x 16'' x 7', electric motor, misc. parts

218
Shelf with Parts
used cutting blades, sprockets, paint, bearings, 36'' x 16'' x 7', all contents on shelf

218A
Dewalt Hammer Drill
corded, good condition

219
Snap-on Tool chest with Tools
31'' x 15'' x 28'', loaded with tools, including snap-on, Milwaukee cordless ratchet, sockets, screwdrivers, mallets

219A
Craftsman Tool Chest with Tools
Craftsman and Jobsmart tools, 20 1/2'' x 8 1/2'' x 14''

219B
Cresent Socket Set and Jobsmart Sockets
Cresent sockets (open end wrenches), Jobsmart sockets 3/4'' drive, 8 pc. 1''-1 1/2'', pry bars, hammer, brush

219C
Tap And Die Set*
good condition

219D
Orange Tree Marking paint*
16 cans spray paint

220
File Cabinet with Parts
4 drawer, all contents, seals, hydraulic fittings

221
Bolt Bin and Cabinets
3 cabinets with parts, 35'' x 12'' x 42'' bolt bin with all contents, bolts, nuts, and washers

222
U Punch Time Clock with Card Holder and Cards

223
Anchor Seal Spray Pump and Nozzzle
electric motor, pump with hose and wand, 1/4 barrel with Anchor seal

224
Barrel Hydraulic Oil
55 gallon AW46 hydraulic oil

225
Lots of Tools, Cresent Wrenches and Screwdrivers
6 adjustable wrenches, screwdriver set, level, square

226
Wrench Set
open end wrenches, 3/8''-2'', 50 pc.

227
Shelf with Parts
36'' x 15'' x 7', microwave, coffee pot, griddle, stereo, all parts on shelf

228
Chainsaw Parts
36'' x 15'' x 7', 2 new 20'' bars, punches, all parts on shelf and bars and chain on wall

229
Bosch CS10 Saw
working saw that is being used

229A
Bosch CS10 Saw
working saw that is being used

229B
Bosch CS10 Saw
working saw that is being used

246

229C
Bosch CS10 Saw
working saw that is being used

229D
Bosch CS10 Saw
working saw that is being used

230
Ridgid Pipe Wrenches, Pry Bars, Sledge
Ridgid 48'' aluminum pipe wrench, 2 pc. Ridgid 18'' steel pipe wrench, Murry 24'' aluminum chain type wrench, 2 pc. pry bars, 8 pc. sledge with fiberglass handle

231
Chain Saw, Chaps, Hard Hats, Skid of Parts
1 pc. Husqvarna chaps and hard hat, 1 pc. Stihl chaps and hard hat, pressure washer wands, 2 chairs, misc. parts

231A
Premier Mold Control
1 1/2 containers full

232
Husqvarna Trimmer with Blade Attachment
MN 1296K, string, good condition

233
Echo Blower & Hand Pruner Saw
MN PB-520, good condition

234
Dewalt 7'' Angle Grinder
MN DW840, good condition

235
Dewalt 4 1/2'' Angle Grinder
MN DWE402, with wire brush, good condition

236
Milwaukee 4 1/2'' Angle Grinder
# 6142-30, good condition

237
GP 1'' Air Impack 3/4'' Drill
with socket, Black and Decker 3/4'' drill (reversing), electric

238
Tool Lot
Handyman jack, 8 lb. Sledge with fiberglass handle, 2 pry bars, blue point 3/4'' ratchet handle 42'', 1'' ratchet handle 36''

239
New MIP Tensioner and Crimper
MN MIP-1300, crimp tool MN MIP 1152-34

240
Encore Steel Strapping Tensioner
NEW!

241
Misc skid
battery grease guns for parts, 3 Lithium batteries for Lincoln grease gun (works), Scotts cordless leaf blower, broom and shovel, 4'-8' fluorescent bulbs

242
Toro Pro Grind 2000 Tub Grinder
MN 2000, SN 867341KBL, knuckleboom with wide grapple, meter reads 594 hours, Cummins engine (rebuilt), 24' folding discharge belt, mounted on trailer with stabilizer arms, good running condition, extra screens and teeth

243
Komatsu WA200 Wheel Loader
MN WA200-7, SN 80740, PIN # KMTWA126KEA080740, NEW TIRES! pin on forks with clamp, meter reads 14,180 hours, Komatsu engine SN 144057 and MN SAA4D107E-2, heat and A/C. new tires, radio, pilot joystick controls, 1 owner machine in good running condition

244
Komatsu WA200PZ Wheel Loader
MN WA200PZ-6, SN 71757, PIN # KMTWA105H01071757, quick attach fork system, Komatsu engine SN 35042244 and MN SAA4D107E-1, meter reads 6,101 hours, pilot joystick controls and 3rd valve, heat and A/C, radio, tire tread 30 to 50%, 1 owner machine, in good running condition

244A
Forks Quick Attach JRB
6'' x 48'' forks with clamp

244B
Slip On Sawdust Bucket
8' x 4' x 4'

245
Komatsu WA200PZ Wheel Loader
SN 71835, MN WA200PZ-6, PIN KMTWA105U01071835, quick attach system, Komatsu engine SN 26586370 and MN SAA4D107E-1, meter reads 9,025 hours, pilot joystick controls and 3rd valve, heat and A/C, radio, tire tread 30 to 50%, 1 owner, good clean machine

245A
Forks Quick Attach with Clamp
JRB, 6'' x 48'' forks, fits Komatsu loaders

245B
Slip On Sawdust Bucket
8' x 4' x 4', 42'' between fork holes

247
*Volvo Wheel Loader
RESERVE FOR 10 DAYS FOR LOADOUT, MN L50E, VIN L50EV71628, 100 HP, 21,252 hours, year 2007, Rebuilt engine model D4DLAE2, quick attach system, 6'' x 42'' forks with clamp, 24V system, heat and A/C, 3 lever boom controls, good tight machine that runs well

247A
Slip On Sawdust Bucket Loader
76'' x 46'' x 48''

248
Allis Chalmers Forklift
RESERVE FOR 10 DAYS FOR LOADOUT, MN FPL50-24, SN 46791000, 5,161 hours, propane engine, 4''x 53'' forks with side shift, 82'' 2 stage mast, brakes need to be worked on, runs and operates, rough condition

249
Kubota Track Hoe KX057-4
MN KX057-4, VIN KBCK0574KK3031122, 419 hours, year 2019, engine 8KE2845, rubber tracks, 24'' bucket with clamp, 6.5 float angle blade, pilot joystick controls, cab has heat, A/C,and radio, includes 4' bucket, quick pin on, low hours, is in excellent almost new condition

250
*JLG Scissor Lift
2005 MN 1930ES, 387 hours, electric scissor lift, new batteries in 2021, 23 x 100 solid tires, good condition

251
Oshkosh Truck with Prentice 210 Knuckleboom Loader
has title, MN C-1834, SN 9056, Fuller transmission with 3 speed aux., Detroit 671 Engine, 6 wheel drive, 10 speed, completely rebuilt, meter reads 113,141 miles, Prentice 210 knuckleboom, SN 210P20875, MN D-210, Detroit 353 rebuilt engine, hydraulics have been rebuilt, lever controls

252
*Hood 28000 Knuckleboom Loader
 MN 28000, SN 287184, approx. 10,000 hrs. new transfer pump, remote hydraulic hook up for slasher saw, 34' boom, mounted on a Pitts trailer, cab has heat, A/C, radio, and joystick controls, front glass has a crack, continues rotating grapple, John Deere Powertech 6.8 engine, Eberspacher system, good tires, very good condition

253
*Prentice 210D Knuckleboom Loader
MN D210D, SN 210P26845, 9,888 hours, has hydraulics for buck saw, Cummins engine,  trailer mounted, joystick controls, foot pedal swing, continuous grapple, good wheels and tires, runs and operates good.

254
*2007 Kenworth T800 with Knuckleboom Loader
New Trunion suspension in 2020, Has a 2017 Serco 1050XR knuckleboom loader, 525 HP Cat, 18 speed, year 2007, full locking rear ends, rebuilt engine at 576,245 hours, has rear mount

255
2004 Peterbilt 379 with 2016 Serco 1050XR Loader
Black log truck with front mount loader, 550 HP Cat engine, 18 speed, year 2005, full locking rear ends, new tag axle, new shocks all around, new springs on drive axles, new torque arms, engine rebuilt December 2019 by Kenworth of Youngstown, transmission rebuilt in January 2020 by Transgear of Hubbard, around 100,000 miles on both rebuilds

256
2002 Freightliner FLD120 Truck
2002 Freightliner
Model: FLD120
Mileage:812,334
Drive Line: 6x4
Engine Type: 12.7 Detroit
Fuel Type: Diesel
Horsepower:500
Transmission:10 speed Eaton Fuller
VIN #: 1FUJAHCG42PK16607

Features and Notes: Detroit 60 series engine, wet line

257
*2005 Kenworth W900 Truck
2005 Kenworth
Model: W900
Mileage:402,827, since Platinum rebuild by OH Cat, 1,402,827 total miles
Drive Line: 6x4
Engine Type: L6, 14.6L (893 CID)
Fuel Type: Diesel
Horsepower:475 Cat
Transmission: 10 speed
VIN #: 1XKWDB9X45J070441

Features and Notes: MN W900, engine MN C15475 with twin turbo, aluminum wheels, good tires, wet line, New hydraulic pump, rebuilt transmision, clutch & fly wheel less then 100K miles ago.  good condition

258
2002 International 9200i Truck
2002 International
Model: 9200i
Vehicle Type: Truck
Mileage:391,761
Drive Line: 6x4
Engine Type: L6, 14.0L (855 CID) N14 Cummins
Fuel Type: Diesel
Horsepower:525
Transmission:10 speed Eaton Fuller
VIN #: 2HSCEAERX2C032422

Features and Notes: MN 9200I6X4, flat top sleeper

259
1999 International 9400 Truck
1999 International
Model: 9400
Mileage:691,906
Drive Line: 6x4
Engine Type:N14 Cummins
Fuel Type: Diesel
Horsepower:525
Transmission: 10 speed Eaton Fuller
VIN #: 2HSFHAER4XC091249

Features and Notes: MN 94006X4, wet line, engine rebuilt in August of 2022, rebuild done in-house, New turbo and air to air, raised sleeper

260
2014 Freightliner Cascadia 125
460 HP Cummins ISX engine, 687,782 miles, year 2014, 10 speed Eaton Fuller transmission, good drive tires, aluminum tires, very good condition

261
*2004 Mack CX613 Vision Truck
2004 Mack
Model: CX613 Vision
Mileage: 706,710
Engine Type: Mack L6, 12.0L (728 CID)
Fuel Type: Diesel
Horsepower:460
Transmission: 13 speed Maxitrque
VIN #: 1M2AE07Y14N020814

Features and Notes: MN CX613, Silver Bulldog, Mack engine, wet line, full locking rear ends, aluminum wheels, good tires, very good condition

262
1998 Peterbilt 379 Truck
1998 Peterbilt
Model: 379
Mileage: 234,793
Drive Line: 6x4
Engine Type:11.1 Detroit
Fuel Type: Diesel
Horsepower: 430 
Transmission: 9 speed Eaton Fuller
VIN #: 1XP5DR9X8WD454978

Features and Notes: 379 Detroit 60 series engine, full locking rear ends, aluminum wheels with good tires, very good condition

263
BMY Military 6 x 6 Truck
Has title, 1990, meter reads 25,930 miles, VIN 31/00549, Cummins engine SN 44386672, 5 speed, 5 ton rating, runs good

264
2013 Chevrolet Silverado Pickup Truck
2013 Chevrolet Silverado
Mileage: 114,804
Body Type: 4 Door Cab; Extended
Trim Level: LT
Drive Line: 4WD
Engine Type: V8, 5.3L; FFV
Fuel Type: Gasoline/E85
VIN #: 1GCRKSE77DZ234222

Features and Notes: MN 10753, crew cab, 5.3 Vortec engine, very good condition

265
Liberty Jeep
year 2006 ,4x4, Sunroof,folddown rear seat,meter reads 182,960 mi.
vin#1J4GL58K26W237937
3.7L engine
Runs and drives good
 

265A
Kenworth Parts Truck
VIN 1XKDDB9X35J641811, year 1995, no hood, engine, or transmission

265B
Kenworth Fiberglass Hood
Fiberglass

265C
Kenworth Parts Truck
no engine or transmission

265D
* Freightliner Parts Truck with Super Cab
no engine or transmission, no title

265E
International Hood
Fiberglass

265F
Rubber Tracks
off of forwarder, 28'' wide, 2 pieces

265H
Poly Tank
1,500 gallon, 8' diameter, 5' 6'' high

265G
Parts Frame

265I
Side Step with Tool Box

265J
Hydraulic Tank Truck Mount
22'' x 14' x 42''    New tank for Serco knuckleboom trucks.

265K
Truck Fuel tank and Mount
aluminum

265L
Scrap Pile

265M
Galvanized Sink
26'' x 89''

265N
Truck Head Board with Built In Hydraulic Tank
84'' x 62'' x4'' tubing

266
2019 Kaufman DT35 Lowboy Trailer
MN DT35, VIN 1K9FR3622KB36754, low hours, year 2019, GX390 Honda Engine on hydraulics, 102'' x 24' deck plus 12' over wheels, 14'' swing outs on each side for a wide load, tool box with 6 ratcheting boomers and chains, aluminum wheels, good tires, very good condition

267
2021 Pitts LT42 Log Trailer
MN Load paying series, VIN 5JYLT4027JPP07068, year 2021, 42', 6 bunks 101''X7' high, steel wheels with good tires, 1' extended bumper, mounted tie down straps, almost new condition

268
Pitts Log Trailer
MN LT42, VIN 5JYLT4228MPP21269, year 2018, 42', 6 bunks, 101'' wide, steel wheels with good tires, mounted tie down straps, very good condition

269
Pitts LT42 Log Trailer
VIN 1PELT4228TP960678, year 1996, 6 bunks, 8' x 7' high, 44' long, steel wheels and good tires, mounted tie down straps, good condition

270
Pitts LT40 Log Trailer
VIN PE9LT40T3KP960235, year 1989, 6 bunks 8' x 7' high, steel wheels with good tires, 42' long, mounted tie down straps, good condition

271
Rebel Trailer
VIN 1R41Y02C7CM000418, year 1983, 42', 8' x 7' high bunks, 6 bunks, steel wheels with good tires, mounted tie down straps, good condition

272
Reitnouer Maximiser Trailer
VIN 1RNF48A27FR034189, year 2015, aluminum flatbed trailer, 90,000 lb. capacity, 102'' x 48', aluminum wheels, tie down straps mounted on rail, very good condition

273
Peerless Walking Floor Trailer
2013, 45' open top w-good tarp system, very good condition, two extra new swinging doors. 46'' x 90'', go with Peerless trailer, VERY NICE!

274
Peerless CTS Trailer Walking Floor
VIN 1P1E04221TPA20851, year 1996, walking floor chip trailer is 8' x 8' x 42', just replaced shoes & parts of the floor that needed it, new suspension 5 years ago, steel wheels with good tires, good condition

275
Budd Chip Trailer 1979
VIN 178523E, 8' x 42', has just been inspected and is OK, good condition

276
Budd Chip Trailer 1979
VIN 167893, 8' x 42', has just been inspected and is OK, good condition

277
Budd Chip Trailer 1979
VIN 178557E, 8' x 42', has just been inspected and is OK, good condition

278
Fruehauf Chip Trailer 1977
VIN HPY583113, 8' x 40', just inspected and is OK, good condition

278A
Aluminum Utility Trailer
65'' x 120'' inside, 4' tail gate, manufactured by: Carry On Trailer Corp., wood floor

279
Fuel Tank with Metered Pump
electric pump, 38'' x 60'' on skids

279A
Fuel Tank with Hand Pump
48'' x 70'' on skids

280
Debarker Parts
New V belts, gear box, and joystick control handle, new head bearings, all parts on pallet

281
Edger Parts
feed roll with some new inserts, gear box, bearings, 19 blades 21'', all parts on pallet

282
Cart Wheels and Parts
All parts on skid, hydrauliic pump and cylinders, 7 pc. 2'' x 8'' cast wheels with bearings

283
Tire Chains
2 pc. For semi tractor dual wheels

284
Belt Guards
all items on skid

285
Bolts and Nuts
misc. bolts and nuts, all items on skid

286
Rollcase Parts
Air cylinders, 24'' portable fan, 6 1/2'' x 24'' rolls with sprockets, deck chain, all parts on pallet

287
Dyna-Glo Deluxe Space Heater
Diesel or kerosene, portable, 50,000 BTU, good condition

287A
Dyna-Glo Deluxe Space Heater
Diesel or kerosene, portable, 50,000 BTU, good condition

287B
Dyna-Glo Deluxe Space Heater
Diesel or kerosene, portable, 50,000 BTU, good condition

287C
Dyna-Glo Deluxe Space Heater
Diesel or kerosene, portable, 50,000 BTU, good condition

287D
Dyna-Glo Deluxe Space Heater
Diesel or kerosene, portable, 50,000 BTU, good condition

288
Remington Space Heaters
80,000 BTU 1 pc., 45,000 BTU 1 pc., 125 propane 1 pc., good condition

288A
Remington Space Heaters
80,000 BTU 1 pc., 45,000 BTU 1 pc., 125 propane 1 pc., good condition

288B
Remington Space Heaters
80,000 BTU 1 pc., 45,000 BTU 1 pc., 125 propane 1 pc., good condition

289
Munsters Sial Space Heaters
40,000 BTU, 3 pc., good condition

290
Space Heaters
2 pc. Masters 75,000 and 135,000, 1 pc. Dura Heat 50,000 BTU

291
Loader Tire Chains
4 pc.

292
Wheelbarrow and Electric Cords

293
Wheelbarrow Loaded with Tools and Parts
ax, air hose, grease guns, tool box, misc. parts

294
Wheelbarrow Loaded with Air Hoses

295
Wheelbarrow Loaded with Tools
wrench sets, socket sets, 125' steel fish tape, grease gun, hard hat, first aid kit, lots of misc. tools

296
Wheelbarrow Loaded with Tools
Fillrite fuel pump with meter, torch, 20 ton hydraulic jack, 2 smaller hydraulic jacks, lots of misc. tools

297
Skid of Supplies
New 24'' Work Station fan, 5 pc. Propane tanks (empty), filters for Komatsu, battery tester,jumper cable # 4 20', Diesel all additive, pump sprayer, 5 case Red # 1 multipurpose grease, washer fluid, antifreeze, WD 40, caulking, SAE 80W-90 gear oil (3 gallons),hand pump for oil on bucket

298
Chain Hoists for Misc. Chains
1 ton chain hoist 1/4'' cable, 1/2 ton chain hoist 1/2'' cable, misc. chains and binders, all parts on skid

299
Saws for Parts
9 pc. Bosch skill saws, 2 pc. Chain saws for parts, oil pump, all items on skid

299A
Socket Set
7/8''- 2'' complete set with 3/4'' drive wrench

299B
Dewalt Grinder
with 46 cutting wheels

300
Motor Oil
6 galons Kawasaki bar and chain oil, 18 pc. 2 stroke oil mixes (5 gallons), 1 1/2 buckets Power Drive fluid 10W for Kommatsu, 1/4 bucket air tool oil, 1/2 bucket 75W-90 oil, propane heater, hand sprayers, misc. oils

301
Log Savers Systems (Skid of Parts)
plastic and metal log saver clips, hammer for clips, Latsch Bacher 4484 Tagging System with hammer and tag dispenser, box of tags, 30 ton hydraulic jack, 2 buckets with tools and parts, Lincoln battery and charger, Propane tank with 2 flame torches

302
Anchor Seal Spray Pump (Skid of Supplies)
Electric sray pump, gas cans, Sunbrite cleaner, hand pump, Dry-o-lite Gas Dry Prime, all parts on skid

303
Skid of Parts
Electrical fuses, roll of plastic sheeting, all parts on skid

303A
Conveyor Belt Fasteners
with alligator tool press

304
Milwaukee Cordless Grease Gun (Items on Skid)
30'' pipe wrench, crimp tools, leaf blower, gas cans, Husquarana 455 Rancher chain saw, condition unknown

305
Electric Cords and Misc. Parts
Dura Heat propane space heater, electric lights and supplies

306
Hydraulic Hose and 5' Saw Bar
all hose on skid

306A
Pacific Hydrostar Water Pump
212CC predator, gas engine with 3'' hose

306B
80,000 BTU Gas Heater
80,000 BTU, 1 hour, heats up to 2,000 square feet,hangs from cieling. Brand new and in the box!

307
Hand Tools
shovels, scraper, cant hooks, all tools on skid

308
Parts and Fittings
Pintle hitch, all parts on skid

309
Electric Heaters
2 pc. 14'' x 21'' heat mat, 1 new heater, 3 used heaters, box fan, Milwaukee cordless drill and driver, chaps, heat bulbs, Power House pressure washer

310
8 Chairs

311
Loader Parts and Skid of Misc. Parts

312
Skid of Hoses
Hydraulic and water hoses, all parts on skid

313
Werner 8' Fiberglass Step Ladder
good condition

314
Werner 6' Fiberglass Step Ladder
good condition

315
Werner 6' Aluminum Step Ladder
good condition

316
Tub Grinder Parts and Hydraulic Oil
3/4 barrel hydraulic oil 46, all parts on shelf

317
Anchor Seal Sprayer System with Honda Gas Motor
Honda GX120 motor, sprayer hose and wand, 3 empty barrels

318
Lockable Storage Cabinet and Tarps and Hoses
Built with 1/4'' steel, 27'' x 27'' x 6', water hoses, 2 pc. Tarps

319
Hand Pumps Broom
work sign, pipe clamp, rake

320
Garden Hose Reel
Shop built on cart fixed for drill power, holds 300' hose, cleaning tub, shop vac

321
Simpson Pressure Washer
Honda GC190 gas motor, hose and wand, good condition

322
Napa 200A Battery Charger and Starter
200A engine start, 60A boost charge, 2A charge, good condition

323
Napa 200A Battery Charger and Starter
200A engine start, 40A boost charge, 6-2A charge, good condition

324
Pro Series Battery Charger
250A engine start 12V, 150A engine start 24V, 150A engine start 6V, good condition

325
Lincoln Ideal Arc Welder 250`
220-480V, MN 250-250, SN 177714, on cart

326
Lincoln AC225 Arc Welder
MN AC225, with extention cord, on cart

327
Western Accu-Flame Cutting Torch
with hose and gauges, tanks on cart

327A
Airco 36'' Cutting Torch (Head Only)

500

327B
Hand Carts
1 pc. 24'' wide with 12'' air tires, 1 pc. 14'' wide with 7'' solid tires

328
Traffic Cones Control Box
3 pc. cones 18'', 4 pc. cones 36''

329
Slip On Tow Motor Forks
5'' x 42'' forks, could be used as quick attach forks

330
Slip On Boom with 2 Attachments
12' boom

331
Steel Plate with Chain
3/8'' x 4' x 8'

331A
*Whit Oak Planks
Approx. 672 board feet of 2''X randem width X 12' 

332
Slip On Loader Bucket
7' x 4' x 4' with slant sides

333
Stacking Rack
76'' x 43'' x 38'''

334
Slip On Loader Bucket
8' x 4' x 4' with slant sides

335
Slip On Scraper
12' x 30'' with 2' sides

336
Bucket fits Kubota Mini Hoe,
4' x 30'' x 30''

337
Skate Rolls
2 1/2'' rolls, 18'' x 10'

338
Used Loader Tires
20.5 R25

339
Loader Dirt Bucket
8' x 40''

340
Slip On Loader Dirt Bucket
92'' x 40''   

341
High Dump Slip On Bucket
3 1/2 yd., 8' x 4' x 4', 

342
Shaft with Sprockets and Bearings
2 pc., 4- 19'' sprockets, 2 11/16'' shaft x 23'

343
Shaft and Bearings
1 7/16'' x 20'

344
Gear Box with Sprockets

345
Frick Track and Frame
45', 38'' C-C 

346
I Beam
3 pc., 3/8'' x 6 1/2'' x 12'' x 23'   

347
I Beam
3/8'' x 6 1/2'' x 12'' x 17' 8''  

348
I Beam
3/8'' x 5'' x 14'' x 24'  

349
I Beam
3/8'' x 8'' x 8'' x 19'  

350
I Beam
1/2'' x 8'' x 14'' x 20'  

351
Steel Sled
1 pc. 5' x 16', 1 pc. 5' x 10'

352
Bridge Steel Frame
2 pc. 6' x 20', side rails

352A
Portable Bridge UPDATED LOT
2 pc. 6' x 30', needs new wood floor, made by ADM Welding
LOT UPDATE New flooring has been added

353
Swamp Mats
12 pc. 4' x 16', 4 pc. 7' 6'' x 12'

354
Steel Pipe
2 pc. 1/2'' x 20'' x 11'

355
Steel Pipe
2 pc. 8'' x 11''

356
Steel Pipe
1 pc. 15'' x 18', 7 pc. 12'' x 7'-18'

357
CTR Circular Buck Saw
60'' saw, direct mount hydraulic motor on saw, SN 610300, hydraulic cyliinder operated, carbide inserted teeth

358
Buck Saw and Bunks
5' bar, hydraulic drive, 16' bunk

359
Belt Conveyor
18'' pan, 6'' sider, 22'' x 18', no drive

360
3 Strand Transfer
10' x 16', no drive

361
Edmiston Portable Sawmill 36'' 4HB
Fully hydraulic, chain tye turner, hydraulic dogs and tapers, 15' carriage, track 34'' C-C, 46' track and frame, 110V over hydraulic set works, panagraph, 20'' x 5' off bear belt, 24'' x 8' outfeed belt, Tong dog, on wheels, 42'' x 48'' cab

362
*Polartec Plus by Snap On Refridgerant Recharger
NOTE: ALL THE REST OF THE ITEMS ARE LOCATED IN THE TRUCK GARAGE approx. 1 1/2 mile up the road just west of the train tracks. MN Polartec Plus A, SN EC1911-259, year 2019, R134A refridgerant, recovery, recycle, recharge station, very good condition

362A
Weitron 134A Refridgerant
1 1/2 tank

363
North Star Performance Pressure Washer
Honda GX390, gas with diesel heater and electronic start, with hose and wand

364
Simpson Pressure Washer
3.5 GPM, 4,000 PSI, Honda GX270, gas, with hose and wand

365
Troy-Bilt Pressure Washer
2.7 GPM, 3,000 PSI, Honda GCV190, gas, with hose and wand

366
Simpson Pressure Washer
2.4 GPM, 3,300 PSI, Honda GC190, gas, with hose and wand

367
3 In 1 Welder
Fabricatoor 252I, mig, stick, and tig welder on metal cart, with 2 auto darkening helmets and 1 canister

368
Lincoln Electric Welder
SN K913858820, weldon power G8000 on performer 16XSL, gas engine, tig welder, meter reads 980 hours

367A
Welding Rods and Wire
4 Boxes 6011 welding rods 
1 roll .35 welding wire 
ALL NEW

369
Cutting Torch
2 tanks on metal dolly cart with gauges and torch

370
cutting Torch
2 tanks on a metal dolly cart with gauges and torch

371
Ingersoll Rand Air Compressor
with single tower van air, air dryer, 7.5 HP electric drive, 80 gallon tank, 2 stage reel not included

371A
2 Retractale Hose Reels
with air hose

372
US General tool Box
includeds all contents, 22'' x 4' x 41'', assorted sockets ranging from 7/8''-5'', 2' ratchets, wrenches, and sleeve pullers

373
US General tool Box
includes all contents, assorted wires, fuses, connector ring, shring tubing, strippers, and zip ties, 3' x 21'' x 41''

374
Parts washer
30'' x 21'' x 3', good condition

375
Kobalt Tol Box
includeds all contents, socket sets, wrenches, channel locks, chizzles, sledges, screwdrivers, 19'' x 41'' x 64'', with built in electric strip

375A
Open End Wrenches
10 mm-32 mm, 1 5/8''- 2 1/2''

377
Retractable Hose Reel

378
Lube Pump with Hose Reel
retractable hose reel with grease sert

378A
Premalube
NLGI # 2 grease, 2 unopened barrels, 1 partially used

379
2 Ton Foldine Engine Crane
SN 367821928, with 5' extended arm

380
2,000 Lb. Transmission Jack
SN 372552049, 10 1/2'' x 6 1/2'' plate

380A
Strongway Pallet Jack
4400 lb. capacity 
Good condition 

381
3 Ton Car Jack

382
Pro Series Car Jack
capacity unknown

383
Air Jack on Wheels

384
Tap and Die Set
Like New! Complete Set!

385
Blue-Point Hex Bit Socket set
87 pieces, Like New! Complete Set!

386
Snap On 1/2'' Digital Torque with Ratchet
SN 1014070486, manual included

387
Snap On Ring Pliers Set
12 pc.

388
Socket and Allen Wrench Sets
13/16''-1 1/2'' sockets, 3/4'' drive, 8mm-19mm Allen wrenches, 3/8'' -3/4'' Allen wrenches

389
Porta-Power
4 ton, 10 ton, 20 ton sets

390
Pro-Logix 12124V Battery Charger
MN PL3760, with engine start

391
Associated Battery Charger
200 amp, 12V, with engine start

392
Shop Vac
5 gallon

393
Husquarna 128LD Weed Wacker
with 2.5 gallon gas jug and partial roll of cord

394
Light Tower and Creeper Cart
commercial electric, 2 lamp light tower, and a snap on creeper cart

395
Werner Adjustable Ladder
300 lb. capacity, 21' ladder

396
Tire Working Safety Cage and Assorted Tools UPDATED LOT
pry bars, cage, sledge, bead setting blaster tank
LOT UPDATE;add wheel balancer weights 10 oz-12 oz.-16 oz.

397
2 Sledges and Pick Ax
10 lb. sledge

398
Assorted Pry Bars

399
Sunex Air Impact
1'' drive with 10'' extension

400
Ingersoll Rand Air Impact
SN A02426917, 90 PSIG, 4,000 RPM, 1'' drive with 10'' extension

401
Hydraulic Bottle Jack
Air powered 

402
Hydraulic Bottle Jack
Air powered

402A
Central Machinery 20 Ton Shop Press
SN 371951522, 26'' x 26'' x 62''

403
Hydraulic Bottle Jack
20 ton

404
Plasma Cutter and Welder
SN 189181200229, Forney easy weld, 180 A., 27V, Chicago Electric Plasma Cutter 40 A., 90V

405
Heater, Microwave, and Creeper
snap on creeper cart, 80,000 BTU Dyna Glo Deluxe kerosene/diesel heater, MN KFA80DGD

406
Milawaukee 1/2'' High Torque Impact
with charger and 5 amp. battery in case

407
Milawaukee 1/2'' High Torque Impact
with charger and 5 amp. battery in case

408
Milawaukee Impact and Drill
with 5 amp and 1.5 amp battery and charger in case

409
Milawaukee 3/8'' Impact and Ratchet
with 1.5, 3, 5 amp batteries and charger. No case.

410
Needle Scaler
4,000 BPM, comes with box, new parts, and manual

411
Ingersoll Rand 261 Series Impact
SN SR21G200312, 90 PSIG, 6,000 RPM, 3/4'' drive, good condition

412
Mini Angle Die Grinder Kit
2 mini die grinders with assorted wheels and brushes and manual, very good condition

413
Air Grinder and Ratchet
chief extended die grinder, SN 375351852, Ingersoll Rand 3/8'' drive air ratchet

414
Porter Cable Heat Gun
120V, 1,500 W

415
Storm Torque Wrench
SN 2016069771, 3/4'' drive, 100-600 FT16

416
Bosch CS10 Circular Saw
SN 903051940, corded, good condition

416A
Bosch CS10 Circular Saw
SN 706000473, corded, good condition

417
Slack Adjuster Kit
with organizer, box of wires, connectors, and zip ties

418
Centech Digital Inspection Camera
2' long camera extension

419
Bosch Oscillating Sander
SN 111005457, good condition

420
Ingersoll Rand Air Chisel

484
Master Force Drill
SN 20190101

485
Bosch RS325 Sawzall
with new metal and wood blades

486
2 Dewalt 4'' Angle Grinders

487
Dewalt 7'' Angle Grinder

488
Dewalt 7'' Angle Grinder
SN 023624

489
2-12 Ton Jack Stands
minimum height 19''

490
3-16'' Jack Stands

491
2-15'' 6 Ton Jack Stands and 2-11'' 2 Ton Jack Stands

492
Air Hoses
with funnels and 28'' zip ties, shop chair

493
Truck Seat
good condition

494
Assorted Pallet
asssorted fuel jugs, tow strap, extension cord, welder extension, air hose

495
3' Countyline Fan

496
Wooden Work Bench
with electric strip, bit sets, grinding wheels, vice grips, 2 clamps, and all contents

497
Work Bench
with table grinder and vice, all contents included

498
Assorted Pallet
Earthquake 1'' drive air impact, 3/4'' air impact, U joints, 3/4'' bolts and nuts

499
Assorted Pallet
2 refridgerant pumps, 245I HP fan alternator, 2 power take offs, tool box, and electrical starter

500
Clean Burn Heater
MN CB3250, SN 12239, 2,598 hours, used oil heater, 300,000 BTU, includes pump unit on tank

501
Oil Tank
13' x 4' tank approx. half full of used motor oil
 

502
Fuel Tank
5' x 27'' x 44''

503
Steps and Platform
6' x 4' x 2'

504
Steps and Platform
6' x 4' x 2'

505
Carted Oil Catch
2' x 3' x 10'', with hand pump for 5 gallon bucket

506
Filing Cabinet and Mini Fridge
works

507
Metal Shelf
173'' x 34'' x 151'' with contents

508
Metal Shelf
126'' x 42'' x 120'', contents not included

509
Metal Shelf
173'' x 34'' x 100''

509A
Metal Shelf
8' x 42'' x 10'

509B
Metal Shelf
76'' x 2' x 6' with tarps

510
20' Extension Ladder
20', capacity 225 lb.

511
Grease Tubes
approx. 120 multi purpose # 2 grease

512
Diesel Anti Gel
8 bottles of anti gel and 13 bottles of 80W-90 gear oil

513
Anti Freeze
11 gallons of pre-mixed anti freeze

514
Air Filters

515
Wheelbarrow with Tools
with 3 extension cords, jumper cables, 4' level

516
Assorted Pallet
3 tire chains, cutting torch

517
New Battery 12V Battery
1 pc. New battery 
925 cca.
threaded posts 

518
Interstate Battery 12v
Starting battery was installed some in 2020. 
1pc.
950 cca.
Still useable 
Threaded posts 

519
Interstate Battery 12V
Starting battery was installed some in 2020
Still useable
1pc. 
950 cca
Threaded posts.

520
Interstate 12V Battery
Starting battery was installed some in 2020
Still useable 
1pc. 
950 cca.
Threaded posts

521
12V Batteries
Starting battery
used 
650 cca.
Threaded posts
4 pieces
1 pc. 925 cca.

522
12V Batteries
Starting battery
Used 
925 cca
Threaded posts .
5 pieces
 

523
2 Boxes of New Bungy Cords
Tarp straps 

524
Assorted Pallet
open end wrenches, crimp kit, assorted chains, manual air hose reel, rope, wooden stakes, shop vac hose

525
Assorted Pallet
rubber belt, LED shop light, Lincoln grease gun, exterior light fixture, radio

526
Assorted Pallet
New chain flags, hard hats, arm rests, high vision vests

527
3 Barrel Shelves and barrels
With 3 barrels of anti freeze and 13 empty barrels 

528
Brake Shoes and drums
10 sets, 3 brake drums

529
Brake Shoes
25 sets

541
Cargo Locks
with canopy bars and mounts

530
Metal Cart
with barrels and funnels

531
2 Piece Tire Chain Set
for Volvo wheel loader, 10' x 30''

532
2 Piece Tire Chain Set
11' x 30''

533
Bolt Bin
with contents of 1/4'' -1' bolts, nuts, lock washers, flat washers

534
All hydraulic hoses on rack
Some new hoses to fit Serco knuckleboom loaders,includes allhoses on rack

535
International Tie Rod
1 pc with knuckle ends 

536
2 Peterbilt Tie rods
1 new and one used with knuckle ends

537
Peterbuilt Doors
Nice condition 

538
Semi Bumper
T800

539
Assorted Pallet
organizer bin with contents of elbows and nylon tubing, hose mounts

540
6' Steel Ramps
6' x 9''

542
Deck Plates
34'' x 24'', 19'' x 34'', 22'' x 24''

543
Semi Air Hoses

544
Protech Boxes
2'' x 3'' x 2'' with 27'' x 11'' step

545
2 Boxes and Mounts
3' x 18'' x 18'' with box mounts and 32'' x 18'' air intake

546
Assorted Pallet
paint supplies, mouse traps, buffing wheel

547
Fuel Tank and Mounts
40'' x 2' fuel tank

548
Pallet of Assorted Belts

549
4 Tire Chains

550
2 Ladders
8' ladder and 24' extension, 225 lb. capacity

551
Assorted Pallet
assorted hydraulics hoses, hydraulic motor, 12'' belt

552
Assorted Pallet
Craftsman tool box with drills, roll pins, bucksaw chain hydraulic hose and motor, assorted bolts, nuts, and washers

553
Assorted Pallet
oil filters, air filters, extension cord, tarp, and air hose

554
Pallet of Binders
Brand new web binders, tie down straps, chain binders, ratchets

554A
Strap Ratchet Handle
LOT UPDATE 
2 pc used 

554B
Strap Ratchet Handle
1pc., New!

554C
Strap Ratchet Handle
1 pc., New!

554D
Fifth Wheel Pin Pull Handle
1 pc. New

554E
Fifth Wheel Pin Pull Handle
1 pc. New

554F
Fifth Wheel Pin Pull Handle
1 pc. New

554G
1pc Ratchet Handle 1 pc Pin pull handle .Used*

554H
1pc. Ratchet Handle 1pc. Pin Pull Handle Used*

554I
1pc Ratchet Handle 1pc. Pin Pull Handle*

554J
1pc Ratchet Handle, 1pc Pin Pull*

554K
2 Ratchet Handles, 1pc Pin Pull Handle. Used*

555
Assorted Pallet
lug nuts, chrome covers, creeper cart, stud bolts

556
Assorted Pallet
steel line, gaskets, fuel filters, injectors

557
Hand Pumps and Gear Oil
unopened trans axle oil and 4 hand pumps

558
Assorted Pallet
hose clamps, radiator fans, hydraulic fittings, coolant hose

559
Chrome Exhaust Pipes

560
Assorted Pallet
springs, u-bolts, air hose, steel mounts

561
Hydraulic Pump and Brooms
Rebuilt hydraulic pump for Prentice knuckleboom loader on Osh Kosh truck,or will fit any Prentice loader 

561A
Brooms and Shovel

562
Chain
1 pc. 1/2'' x 10', 1 pc. 1/2'' x 20'

563
Misc. Chains
12 pieces

564
Assorted Pallet
parts for Serco 8500 loader, 43'' hydrulic cylinder, rubber seals, 20'' dual threaded bolts,seals fit 1050 and 8500

565
Steel Work Bench
6' x 3' x 3' with Dewalt bench grinder and a Colombian 4 1/2'' vice

566
Pipe Threading Kit
3/8''-2'' bits, threading oil and threading tool

567
Assorted Pallet
Reese tow power 1 ton hoist, cleaning supplies, 31 cans of brake cleaner

568
Truck Parts
steering wheels, mirrors, air horn, seat belts

569
Assorted Pallet
head lights, running lights, and trailer lights

570
Assorted Pallet
shocks, wheel bearings, brake adjusters

571
Assorted Pallet
air shocks, filters, hub seals, wheel seals, gaskets

572
Assorted Pallet
fans, wheel bearings, U bolts, mount brackets

573
Assorted Pallet
fire extinguishers, garden sprayers, caution reflectors, filing cabinet, trailer lights

574
Mud Flaps and Hose Clips

575
Air Suspension Mounts and Hitch Pins
Peterbilt parts

576
Truck Springs and Diesel Mate
36 bottles of diesel mate

577
Assorted Pallet
assorted lights, air suspension, water valves, fuel transfer box kit

578
Assorted Pallet
grease surts, 34'' x 4'' roller, 2 pc., 18'' x 8'' roller, hydraulic valves, electric outlets and sockets

579
Thrust Bearings
2 barrels of used anti freeze

580
Assorted Pallet
3 turbos, oil pump, steering pump

581
Assorted Parts
U joints, rubber shocks, grease caps, bearings, brake tensioners

582
Assorted Lights
trailer plugs, trailer lights, running lights, liscense plate lights, pin plugs, 2'' chrome plastics, LED lights

583
Caterpillar Head
Used head. 
2 pc. New spring leaves

584
4 Tires
P265165R18

585
Wooden Shelf
New fender mounting kits, 51'' x 28'' x 6'

586
Detroit Diesel Series 60
12.7 series 60 , 400 hp. Running good when taken out

587
W900 Front Drive Axle
 completely rebuilt, new yokes,wheel hubs 

588
Disassembled Axle
axle housing with leaf springs, fits 2001 Freightliner

589
Semi Hitch Mount
mount plate size 50'' x 39''

590
Assorted Pallet
cutting torch set, tie down straps and ratchets, manual oil pumps, 2 rolls of plastic

591
Assorted Pallet
PTO gear box, hydraulic motor transformer, gear fork and cover, spigot caps

593
New Fan Clutch Rebuid Kit

594
Rotating Electrical Contron
for the rotating point on a knuckleboom

595
Brake Drums
2 Brake drums with 2 brake shoe sets, fit on Freightliner Cascadia

596
New Brake Drums LOT UPDATE
For steer axle
UPDATE only 2pc 

596A
UPDATE ADDED LOT 4pc Brake Drum*
For steer axle or tag axle rated 20,000pds.

596B
UPDATE ADDED LOT 6pc*
Brake Drum for drop axle rated for 13,500 pds

596C
UPDATE added lot,6pc Brake Drum*
Same as lot 596B

596D
UPDATE added lot 5pc Brake Drum*
Same as lot 596B

597
3600AX Brake Drums
4pc New Brake Drums 

618
2 Tires
425165R22.5, recaps

597A
Brake Drums 3600AX
NEW 4pc

597B
Brake Drums 3600AX
NEW4pc 

598
LOT UPDATE Lot removed
New 3600AX Brake Drums
3pc.

598A
Brake Drums 3600AX*
NEW 4pc

598B
Brake Drums 3600AX*
NEW  4pc 

598C
Brake Drums 3600AX*
NEW 4pc 

598D
Brake Drums 3600AX*
NEW  4pc

598E
Brake Drums 3600AX*
NEW 3pc

599
3 Wheel Wells

600
Oil Filters

601
Oil Filters

602
Oil Filters and Air Filters

603
Oil Filters
for Serco loaders

604
Tank Tap Hand Pump
barrel hand pump

605
Gibson Refridgerator and Contents
air tight storage for chemicals and welding supplies

606
Radiators
3 radiators 28'' x 3', 1 oil cooler 21'' x 34'', box of electrical wrap

607
Used Rims
3-22.5'' aluminum rims, 1-24.5'' steel rim

608
New Steel Rims
2-W24.5'' x 8.25'', 4-W22.5'' x 8.25''

609
Rims
9-22.5'' aluminum rims

610
Rims
9-24.5'' aluminum rims

P813489N

611
4 Tires
4-11R24.5, used

612
4 Tires
4-11R24.5, used

613
4 Tires
4-11R24.5, recaps

614
4 Tires
4-11R24.5. recaps

615
4 Tires
4-11R24.5, recaps

616
3 Tires
11R22.5, 11/32 tread depth, virgin rubber

617
2 Tires
virgin rubber, 295/75R22.5, 10/32 tread depth

619
2 New Tires
315/80R22.5, New!

620
2 Tires
425/65R22.5, recapped

621
Tire
New!, 425165R22.5

622
Tire
New!, 315/80R22.5

623
5 Tires
5 pcs., 295/75R22.5, recaps
LOT UPDATE; add 1 tire , 6 pc total

624
3 Tires
3 pcs., 275/80R22.5, recaps
UPDATE LOT;add 1pc.same size with Trailer tread,4pc total

625
3 Tires
11R22.5, 3 pcs., recaps

626
4 Tires
11R225, recaps

627
6 Tires
virgin rubber, 255/80R22.5, 6 pcs.

628
6 Tires
255/70R22.5, 4 pcs., recaps
LOT UPDATE; add 1 tire same size with rim

629
4 Tires
295/75R22.2, 4 pcs., recaps

630
4 Tires
11R22.5, 4 pcs., recaps
LOT UPDATE; add 2pc ,6pc total

631
2 Tires
recap, 315/80R22.5, 2 pcs.
LOT UPDATE: only 1 tire left

632
6 Tires
295/75R22.5, 6 pcs., recaps

633
6 Tires
11R24.5, 6 pcs.
UPDATED LOT; add 1pc ,7pc total

634
Plastic 55 Gallon Drums
13 empty drums

635
Sawhorses
2 pc., steel, 36'' x 36'' high

636
Treated Plywood
3/4'' x 4' x 8' and some smaller pieces

637
Driveway Cloth*
12'x approx.300'  new