Formerly Graham Lumber
Previous Page Listing ID#: 1355223

Auction Location

Selmer, TN 38375
Auction Dates and TimesSALE IS COMPLETED
Tuesday Dec 14, 2021 Completed
Auction Type
 Live Auction 
Company Information
Bright Star Realty and Auctions, INC

Contact: Loren Beachy
Phone: 574-825-0704
Email: beachyauctions@gmail.com
Website: brightstarauctions.com

GoToAuction.com ID#: 5286
View company information and listings

Free Email Notifications

Sign up for the GoToAuction.com email notifications and we will let you know about sales in your area!  You may set up alerts by area (zip and radius), keywords, and by company.  It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions

There is a 13% online buyer’s premium in effect for all purchases. All items sell where is as is with no warranties or guarantees. Buyer is responsible to inspect all merchandise prior to placing bids. All items must be paid within 7 business days. Payment terms: Cash, check, wire transfer, or any major credit card. (additional 2% CC fee will be charged for CC payments). All items are pick-up only. Smalls must be removed within 2 days. Buyer shall assume responsibility of all property when auctioneer says sold. Auction company is not responsible for any missing or stolen items.



11751 CR 12 Middlebury IN 46540
Office 574.825.0704 • Fax 574.825.2757
Direct 260.350.8953 Eugene Hochstetler
Email: eh@brightstarauctions.com
Website: www.brightstarauctions.com
 
 

TERMS AND CONDITIONS OF SALE and MACHINERY REMOVAL

Equipment Bidding Terms: Full payment day of auction in the form of cash, personal check, business or company check or certified funds. Credit card payment is available for an additional 2% fee. See full auction terms for buyer’s premium and more information.

General liability insurance of no less than $1,000,000 shall be required to remove any machinery from the site, installed or not installed. This certificate will be required before entering the property to remove any items.

Full payment must be made or arranged before leaving premises and before machinery and equipment is removed.

Buyer shall indemnify and hold harmless the seller and auctioneer, its agents and employees from and against claims, damages, losses and expenses including, but not limited to attorney’s fees arising out of or resulting from purchase and removal of equipment.

Buyer will provide fire watch at buyer’s expense during cutting and welding activities associated with removal of equipment.


All descriptions are conscientiously described by the seller and Auctioneer; however, neither assumes any liability for errors or omissions. Everything sold as is where is with no expressed or implied warranties of any kind. No guarantee of merchantability or suitability for intended use is given or implied. The successful bidder is responsible for the lot purchases from the time the auctioneer calls it sold. Neither the auction company nor the seller assumes any responsibility for any injuries suffered while inspecting, buying, or removing machinery and equipment. Jurisdiction and venue regarding any legal dispute shall be in McNairy County, TN .


 

_______________________________
Buyer – Graham Lumber Company, Selmer Operation Auction Buyer #______________
December 14, 2021
 

 

 

 

 

 

 

 

Bidder Terms and Conditions

These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer.
 
  1. Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
 
  1. Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded, where required, as follows:
IN, IL , WI , KY , OH , VA , AR , NY, NC, TN, MO .
 
  1. Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer: “Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction. “Absentee Bidder” means a person or entity that submits an Absentee Bid.
“Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION.
“Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids.
“Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected and where a Buyer may pick up Personal Property.

“Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder.

“Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms.

“Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer.
"Buyer" means the Winning Bidder with respect to each Lot of Personal Property or of each parcel of Real Property.
"Buyer's Premium" is an amount with respect to each Lot of Personal Property or with respect to each parcel of Real Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account. For Real Property offered Subject to Seller’s Confirmation, the Buyer’s Premium will be calculated on the amount of the High Bid Subject to Confirmation.

“Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property or Real Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation.

“Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer.

“High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot or on a parcel of Real Property.

“High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on Real Property put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price.
 
“High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot or a parcel of Real Property.

"Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event.

“Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer.

“No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale.

“Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions.

“Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online.

"Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered.

“Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers.

“Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer).

“Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms- length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction.

“Property” means the Real Property and the Personal Property.

“Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium. "Registered Bidder" means a person or entity that has registered to bid at the Auction.

“Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction.
“Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE.

“Reserve Price” means the minimum price that Seller is willing to accept for specific Property.

“Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer.

“Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid.

“Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by
Seller).

"Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid.

“Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction.

“Without Reserve” means Absolute.
 
 
  1. Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.
 
  1. Auction Conducted in the State of Indiana.
 
    1. For Auctions in the State of Indiana and Online. All Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are entered into in the State of Indiana, all bids and payments are received in the State of Indiana, and the Realty Purchase Agreement, if any, will be formed and entered into in the State of Indiana.
    2. For Auctions outside of the State of Indiana. All Property is offered for sale in the state of the Auction Site, and will be sold in the state of the Auction Site. Notwithstanding the physical location of any Bidder or any Participant, these Terms are entered into in the state of the Auction Site, all bids and payments are received in the state of the Auction Site, and the Realty Purchase Agreement, if any, will be formed and entered into in the state of the Auction Site.
 
  1. Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.

The Buyer’s Premium for Personal Property will be amount equal to thirteen percent ( 13%) of the Hammer Price for each Lot Knocked Down at the Auction.

The Buyer’s Premium for Real Property will be amount equal to percent ( %) of the Hammer Price for each parcel of Real Property Knocked Down at the Auction.
 
  1. Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
  2. Nature of the Auction.

X The Auction for the Personal Property is an Absolute Auction.

The Auction for the Personal Property is With Reserve. Auctioneer may Withdraw any Lot offered With Reserve prior to the Fall of the Hammer.
 
  1. Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
 
  1. No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
 
  1. Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
 
    1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
 
    1. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
 
    1. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
 
    1. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
 
    1. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
 
    1. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
 
    1. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
 
    1. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.
 
    1. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties,
(i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
 
    1. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
 
    1. No Reduction or Retraction of Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.
 
    1. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.
 
    1. Online Bids. Online bids may not be reduced or retracted.
 
  1. Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). Absentee Bids may be initiated and advances in accordance with Auctioneer’s policies and procedures. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
 
  1. Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
 
  1. Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
 
  1.  
 
  1. Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
 
  1. Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot or item of Personal Property or each parcel of Real Property will be the Buyer of such Property.
 
  1. All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
 
  1. Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
 
  1. Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.
 
  1. Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or
representation by Auctioneer
 
  1. Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
  1.  
Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
 
  1. Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ring man, or multiple bid assistants or ring men, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
 
  1. Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the

vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
 
  1. All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
 
  1. Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked- Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
 
  1. Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases must be paid for within five (5) days after the close of the Auction. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.
 
  1. Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Disassembly and removal shall be done in a workmanlike manner, and each Buyer shall indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer's employees, agents, representatives, or independent contractors, in connection with the disassembly or removal of any Personal Property. Any and all damages to the Auction Site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller.
 
  1. Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them.
 
  1. Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.
 
  1. No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
 
  1. Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
 
  1. Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.




 
  1. Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled
to specific performance or other equitable relief.
 
  1. Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
 
  1. Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
 
  1. Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
 
  1. Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
 
  1. Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
 
  1. Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim, suit or cause of action relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
 
  1. Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their respective rights hereunder.

 
Listing Information
Liquidation of formerly Graham Lumber including Morbark and Fulghum debarkers, TMA carriage, Sherman Top Arbor thin kerf gang saw, 2013 Helle Scragg mill and much more. Don't miss your chance on this quality equipment. Consignments are welcome, call Myron @ 574.229.4341 to consign your equipment for free marketing.

3D39

1

00
Information Lot
TENNESSEE STATE AND LOCAL SALES TAX OF 9.25% WILL BE CHARGED. Please bring valid exemption certificates if you have them or provide them immediately upon receiving an invoice if you win a bid online. Buyers have 90 days to remove installed equipment
 

111

98
Heavy Equipment Key Set 24 Keys
Heavy Equipment Key Set 24 Keys. Kit includes keys for John Deere, Toyota, Yanmar, Hyster, CAT, Lull, Volvo, Case, Skytrack, Bobcat, Hybrid, Massey Ferguson, Snorkel, JLG, Upright, New Holland, Skyjack, Genie, Snorkel and many more.

124

99
Manual Sealless Steel Strapping Tool
Model A333, works for 1/2", 5/8" or 3/4" banding, new in box

132

100
Fulghum E1018 Rosserhead Debarker
Serial # F1-00-61, DED-320101-0320, 20' capacity, 7' x 30' overall, 40 HP electric motor, hydraulic kickers, includes cab and controls, electric shutoff, cab has A/C and is 4' x 5' x 7', includes structure steel to ground, one owner and overall in good condition, first lot of an entirety

135

101
4 Strand Log Deck with Stop 'N Load
14' x 24' overall, electric drive, includes catwalk on sides of deck and structural steel to ground, good condition

138

102
Belt Conveyor
26" belt, 10" sides, 3' x 85' overall, electric drive

139

103
Entirety Lot 100-102
With 10% raise

142

104
Schurman Log Boss 3-HB Carriage
RH 42" style C carriage, tong dog carriage, lineal position, air dogs, includes controls in cab, no setworks, 1st lot of an entirety

143

105
Carriage Track
62" center to center, 7' x 65' long overall

145

106
Rub Rail
17' 6" long, 38" tall

146

107
Tyrone Berry Carriage Feed
Model SMA-285-5, serial # G1349, DA-LM-50234-6, 150 HP motor, 5' x 8' x 6' tall overall, includes electric shut off

147

107A
Shotgun Drive

149

108
Shurman Operator's Cab
5' x 12' x 8' tall, insulated, has A/C

150

109
Lewis Control Scanner
20' long, no controls 

151

110
Entirety Lot 104-109
With 10% raise

152

111
5 Strand Log Deck with Stop 'N Load
13' x 37' x 5' tall, included structural steel to ground, electric drive

153

112
Bar-Type Log Turner
60" turner, 3' x 6' x 3' tall overall

154

113
Belt Conveyor
35" belt, 38" pan, 4' x 22' overall, electric drive

155

114
Lumber Transfer Bar
5' x 16', air cylinder

156

115
Drop Belt Conveyor
36" pan, 21" belt, 4' x 15' overall, air cylinder for lift, electric drive

157

116
Roll Case with Pop Up Transfer
4' 6" x 22', 36" long, 8 1/2" rolls, 2 3/16" shaft, 34" on center, 8' x 11' 4 strand pop up transfer, electric drive, air stop/pup up

158

117
5 Strand Pop Up Transfer Deck
6' x 14', air pop up, electric drive

159

118
Efurd Edger
Serial # C207-16-1194, 4' x 8' x 6' tall, has 2 laser lights, twin blade split arbor, includes electric motors, and lot # 119 and 120

121
GE Electric Motor
40 HP, 324T frame, 1780 RPM, includes electrical shut off

160

119
Infeed for Edger
Sells with edger, 4' x 8', 33" long, 4" rolls, 24" on center

122
Electric Motor on Edger
No tag

161

120
Tailing Belt
Sells with edger, 21' long, 5" belt, 6" x 12" frame, no slidepans included

162

122A
Hydraulic Pack
36" x 24" x 13" tank, 10 HP electric motor, includes valves, part of entirety-goes with edger lot 118

163

123
Entirety Lot 118-122
With 10% raise

124
Belt Conveyor
30" x 28' overall, 23" belt, electric drive

167

125
3 Strand 90 degree Transfer Deck
11' x 20', no drive, includes steel structure to first cross beam, no end sprockets on end that butts into next transfer deck, sells with lot # 126

171

126
4 Strand Transfer Deck
Sells with lot # 125, 12' 6" x 28', electric drive, H78B rooftop chain, includes steel legs to ground in building and no structural steel on outside

179

127
Shurman Thin Kerf Gangsaw
Model 10SEA48, serial # 3014, 8' x 14' x 7' tall, 22"-28" blades, 10" bottom arbor with clam shell opening, 50" capacity, very good feed rolls, does not include electric motors or outfeed, includes electric disconnect, sells with the infeed lot # 128, first lot of an entirety

181

127A
Gangsaw Blades
14- 28" blades, 8- blades on cart, cart for blades 32" x 60"

184

128
Infeed for Gang Saw
This lot will sell with the gang lot # 127, 8' x 22', 65" long, 8 1/2" rolls, 2 3/16" shaft, 30" spacing, hydraulic drive, 12' x 13', 6 strand pop up transfer with electric drive and cant stop, does not have idler sprockets on end of transfer

187

129
Outfeed for Gang Saw
5' x 17' roll case, 53" long, 8 1/2" rolls, 3' spacing, 8'- 4 strand pop up transfer, 2 3/16" shaft, hydraulic drive, 14' x 18' x 3' tall transfer deck, ties into rollcase, electric drive, air pop ups

195

130
Toshiba Electric Motor
Model B3004VLF4VM, serial # 95102163, 300 HP, 447TC frame, 1775 RPM, 3 PH

198

131
Toshiba Electric Motor
Model 4C4300L169931, serial # 130400870, 300 HP, 11780 RPM, 447TC frame, 3 PH

212

132
Teco Electric Motor
Serial # DF7535220002A, 30/20 HP, 364T frame, 1765/1185 RPM

225

132A
Hydraulic Pack
16" x 60" x 24" tank, 25 HP motor, has oil cooler, part of entirety-used on gang saw lot 150

227

133
Hydraulic Pack
2 electric drive hydraulic pumps, 1st tank is 2' x 3' x 42" tall, 2nd tank is 2' x 3' x 2'

231

134
Entirety Lot 127-134
With 10% raise

243

135
Belt Conveyor
32" x 24' overall, 18" belt, electric drive

255

136
Belt Conveyor
28" x 21", 18" belt, 22" pan, 6" sides, electric drive

331

137
Belt Conveyor
32" x 30', 23" belt, 25" pan, 8" sides, electric drive

343

138
4 Strand Transfer Deck
11' x 36' overall, electric drive, sells with lot # 140

347

139
5 Strand Transfer Deck
12' x 18', H78B rooftop chain, electric drive

351

140
4 Strand Incline Transfer Deck
8' x 11', does not include sprockets or shaft where it butts up to another transfer deck, no drive, sells with lot # 138

355

141
Morbark 640 Debarker
Hydraulic feed, electric head, structural steel to ground, 75 HP electric motor, first lot of an entirety

357

142
Emerson Electric Motor
75 HP, 11785 RPM, 365T frame

143
Morbark Debarker Infeed Trough
Serial # 284, 18' infeed trough, 13" cleat track, hydraulic drive, includes structural steel to ground, good chain

F

144
Morbark Debarker Outfeed Trough
20' long, 12' ladderback chain, hydraulic drive, 3 arm kicker, includes structural steel to ground, good chain

145
Morbark Debarker Cab
54" x 60" x 70" high, A/C, includes structural steel to ground

146
Morbark Hydraulic Unit
75 HP, includes cut off

147
Bark/Mulch Conveyor
25' x 25" wide, 18" pan, 12" sides, includes electric cut out, # 15 ladderback chain, 11" wide, electric drive

148
Entirety Lot 141-147
With 10% raise

149
4 Strand Log Deck with Stop 'N Load
Debarker deck, 13' x 30' with 3 stop and load arms, no drive, includes structural steel to ground

150
2013 Helle Scragg Mill
16' overhead end dogging w/vertical edger #1 & 2, S/N 201438, 50 HP each w/setwork position, 56" F7 saws, 20' tailing belt, rooftop deck under trailer to catch boards, independent vertical edgers and scraggs, C-55 rooftop chain, tipple section for slab dump or board, transfer to edger, air conditioned saw cab w/ setworks & monitors, S/N 201435, missing arbor and blades on one edger, very nice late model unit

151
Scragg Infeed Log Deck with Stop 'N Load
13' x 28', 4 chain, electric motor, 10 HP, serial # 135055958, legs to first I-beam, 36", includes structural steel to ground

152
Webster Vibrating Conveyor
50' x 36", 25" pan, 9" sides

153
Belt Conveyor
33" x 32', no drive, 25" pan, 12" sides, 20" belt, no drive

154
Belt Conveyor
24" x 28', 10" sides, 23" belt, legs to first I-beam, electric drive

155
Belt Conveyor
28" x 58', 22" pan, 8" sides, 19" belt, electric drive

156
Fan
30" master air fan

157
Control Panel
Electric, for scragg

158
3 Strand Transfer Deck
10' x 18', electric drive, includes structural steel to ground, sells with lot # 159

159
3 Strand Transfer Deck
18' x 8', electric drive, sells with lot # 158

161
4 Strand Transfer Deck
12' x 40', H78A chain, electric drive

160
Transfer Deck
3- 15' strand for transfer deck, no chain, no drive

162
6 Strand Unscrambler
15' x 7', electric drive, 8' deck on top with 5 end evener rolls

163
Belt Conveyor
28" x 26' x 46" high, 4" sides, 22" pan, 15" belt, electric drive

164
9 Saw Drop Saw Trimmer
20' capacity, 24" blades, includes control panel, 8 strand deck 18',

165
Transfer Deck
Slanted, attached to trimmer, 15' x 22', 7 strand, electric drive, no sprockets on 1 end

166
Belt Conveyor
36" x 35', 28" pan, 26" belt, 12" sides, electric drive, does not include apron

167
4 Strand Green Chain
12' x 112', 5 arm electric board stop, 42" high, electric drive

168
Corley Edger
Serial # T3-C531-004, 2- 18" moving blades, 34" x 9' infeed, 36" x 9' deck, 2 1/2" x 32" rolls, 40 HP motor, electric drive

169
Progress Chipper
Model 60, serial # 00 00 20, 650 RPM, bottom discharge 6 knife, includes electric cutoff, 60" wheel, first lot of an entirety

170
NAE Electric Motor
200 HP, 1185 RPM, 449T7

171
Chain Conveyor
19" x 7' flat and 9' slant, 11" pan, 16" sides, 9" ladderback chain, no drive

172
Chip Screen
6' x 6", 40" high, electric drive, 3/2 2 HP, model C526, serial # 26386

173
Concave Belt Conveyor
42" x 24', 26" belt, electric drive, no drive

174
Morbark Chip Blower
30" blower, 40 HP electric motor, dual chute

175
Entirety Lot 169-174
With 10% raise

176
Webster Vibrating Conveyor
36" x 25 1/2', 24" pan, 9 1/2" sides, electric drive, 5' fiberglass section, infeed to chipper

177
MDI XR-3000 Metal Detector
Serial # XRS-10852, does not include fiberglass section

178
Belt Conveyor
36" x 65', electric drive, 26" pan, 26" belt, 12" sides, NAE motor 7.5 HP, serial # 15042860W

179
Concave Belt Conveyor
38" x 40', 22" belt, electric drive

180
Belt Conveyor
20" x 28', electric drive, no drive, 18" pan, 15 1/2" belt, 6" sides

181
Chip Screen and Cyclone

182
Vibrating Conveyor
40" x 26', includes 5' x 26" fiberglass section, 22" pan, 8" side, electric drive

183
Belt Conveyor
36" x 110', 31" pan, 8" side, 29" belt, electric drive

183A
Belt Conveyor
36" x 13', 31" pan, 29" belt, 10" sides, electric drive

183B
Concave Belt Conveyor
48" x 50', 36" belt, 2 end no roll, no drive

184
Belt Conveyor
22" x 20', 18" pan, 8" sides, 15" belt, electric drive

185
Precision Vibrating Conveyor
Model 65, serial V-1511, 45" x 65', 36" pan, 8" sides, 15 HP motor model 5KE254BC205B, serial # HOH13746302H

186
Precision Vibrating Conveyor
Serial # V1512, 45" x 55', 36" pan, 8" sides, electric drive

187
Vibra-Pro Vibrating Belt
12' x 33", 18" pan, 12" side, 26' overall, 7' tapered section 18" to 9", fiberglass section 48" x 29', 18" pan, 5 1/2" side, electric drive

188
Concave Belt Conveyor

189
Belt Conveyor
36" x 80', 31" pan, 10" sides, 26" belt, includes cutoff and starter, cleated, electric drive, incline to trailer loading system

190
Twin Auger Trailer Loading Station
40' x 24' x 15' high, auger mission

191
Belt Conveyor
22" x 48' x 13" sides, 18" pan, 18' to incline, 30' incline to deck, 14" belt, includes structural steel to ground

192
5 Strand Transfer Deck
16' x 17' x 52" high, 1 strand no chain, electric motor but no gearbox

193
Hose Coil
Reel with high pressure hose, 70' hose

194
Hydraulic Pack
48" x 30" x 18", with oil cooler (no motor on cooler), 40 HP electric motor

195
Water Tank
36" high x 36" in diameter, loose valve

196
Hydraulic Pack
27" x 60" x 18" tank, 20 HP motor, oil cooler, with valves, used on lot 112

197
Quincy Air Compressor
Model QSF150-125, serial # G0472F, includes cutout, 150 HP, hours unknown

198
Silvan Twin Tank Air Dryer

199
Disscant Air Dryer
3' x 8' diameter, includes cutout

200A
Abel-Howe Crane
1 ton crane with trolley, 16' boom

201
Armstrong Grinder
Serial # 4562, #6 right hand sharpener for band saw

200
Entirety Lot 197-199
With 10% raise

202
Armstrong #16 Post Brackets
7 piece, band clamp and brackets

203
Armstrong Band Roller
Stretcher and Roller, electric motor

204
Hammering Bench
Top and bottom anvil

205
Armstrong Stretcher and Roller
Model 3-10C, serial # 9294, for circular saw, includes hammering table

206
Edger Blade Grinder

207
Wright Machine Grinder
Model W-150HD B, serial # A9535, gang saw sharpener

208
Wright Machine Grinder
Model W-350HO, serial # 69422, auto dual

209
Oregon Select Grinder
Model BSA 1000, 12" wheel

210
Precision Tub Grinder
Model 3K-440, serial # PAG-792, chipper knife grinder

211
Air Clamp

212
Babbitt Melting Pot
With updraft, includes chipper parts on bench, knife jigs, some new knife holders

213
Dual Head Resurfacer
Serial # 3014-10

214
Metal Work Bench
36" x 48" x 36" high

215
Metal Cabinet
Includes contents, grinding wheels, and stretcher parts

216
Midwest Fastener Drawer
Includes contents

217
Cart on Wheels
36" x 24" x 32", includes contents

218
Band Saw Blade
9" wide

219
4 Trimmer Blades
24", 1 3/8" arbor

220
6 Edger Blades
18" split blades, 2" and 3 1/4" arbor

221
Tools on Work Bench
48" hanchett back gauge, everything on bench and cabinet beneath

222
Torit Filter
Filter house and collector, includes dust pipe on inside of filling room

223
Goodman A/C and Heating Unit
serial # 1508037487, no duct work

224
Tank Holder
58" x 34" x 66", 4 shelf

225
Ice Box
92" x 36" x 64", 2 doors

226
Fans and Chairs
20" fan, 16" fan on wheels, 2 folding chairs, 1 wooden chair

227
Air Hoses, Floor Mats, Tarp, Vacuum, Water Cooler, Fire Extinguisher, Gas Can, Etc.

228
Emerson Microwave and Work Bench
48" x 36" x 38" workbench, fire extinguisher, utilidor wash tub, Sony radio

229
Allen Bradley Electrical Control Station
11' x 90", 5- 16" columns, 1- 28" column, includes single face transformer

230
Cutout and Starter
Scragg and Chipper electric control panel

230A
Allen Bradley PowerFlex 700*
VFD 150 HP 480V AC Drive, Excellent Condition, still in Original box

230B
Wiegmann N1C243008LP Electrical Housing*
New Large Enclosure, 30" X 24" X 8 5/8"

230C
Hoffmann C-SD30248 Concept Junction Box*
New Wall Mount Enclosure

230D
Landen Strapping Machine*
Model LP-9, Ser# 2191, Good Condition!

230E
PAC Strapping Machine*
Model PSM1412-IC3A, Ser# 608107414, Semiautomatic Strapper, 110 volt, single phase

230F
Kirko DOPAG Grease Transfer Pump*
For 5 gallon Bucket

230G
Kirko DOPAG Grease Transfer Pump*
For 5 Gallon Bucket

231
Monticello Steel Lined Dip Tank
20' x 7' x 6', hydraulic lift, includes controls and chemical barrel with pump

232
Merchandising Saw
80" saw, 100 HP motor, includes controls, first lot of an entirety

233
Operators Cab
48" x 50" x 6'

234
MI Hydraulic Pack
46" x 15" x 27" tank, 20 HP motor, with cutout, includes cooling unit

235
Belt Conveyor
12", 4" sides, 34' long, electric drive

236
Belt Conveyor
36" wide, 50' long, 30" belt, electric drive, 5 HP motor

237
Chain Conveyor Log Trough
40" wide, 18" pan, 17" cleats, 15' long, 56" high, electric drive

238
Chain Conveyor Log Trough
40" wide, 18" pan, 17" cleats, 50' long, 56" high, electric drive

238A
Electrical in small building

239
Entirety Lot 232-238
With 10% raise, includes electric control panels in building

240
Toledo Truck Scale
We will not offer this lot at auction. If you have interest please call Eugene. 70' long x 11' wide, 4 sections, Matko electronic readout, Mettler Toledo control panel

241
Sprinkler System
8 units, for log yard, no pump

242
Container Used for Tank
8' x 8' x 40', steel container, partially underground

243
Steel Building
We will not offer this lot at auction. If you have interest please call Eugene. Main building: 50' x 150' x 28' sidewalls, 2 story 10' to first floor, 20' x 20' addition on end 2 story, 30' x 40' addition on backside 2 story

244
Cat Walk and Stairs in Mill
Does not include any structural steel, catwalk and roof over dip tank only

245
Electrical Conduit and Wiring
All electrical in building not lotted with equipment, includes lighting

246
56" Saw Blade
F7 style

247
56" Saw Blade
F7 style

248
56" Saw Blade
F7 style

249
56" Saw Blade
F7 style

250
56" Saw Blade
F7 style

251
52" Saw Blade
F7 style, new saw

252
52" Saw Blade
F7 style, new saw

253
Air Powered Grease Pump
Fire-Ball 300, includes hose reel and barrel with grease

254
Handpump on Barrel
Barrel with oil

255
36" Fan
No motor

256
Metal Shelf
12" x 24" x 60", steel frame

257
Poly Wheelbarrow

258
Washer Parts
Model PW20G, needs new pump

259
Hydraulic Cylinder for Carriage
2 new cylinders

259A
Cylinder
Model 4 00CTCUTTLUN1.50041L, serial # B4851430001E

260
Metal Cabinet
28" x 24" x 76"

261
Roller
5 1/2" x 29", 1 15/16" x 65" shaft

262
North America Electric Motor
10 HP, 1770 RPM, 215T frame, inverter duty 20:1UT, new motor

263
Steel Table
8' x 24" x 36", contents included, 2 1/2" x 100' water hose, NAE electric motor, 3 HP, 1760 RPM, 182T frame, water hose

264
Briggs and Stratton
5.5 HP, OHV motor

265
Burks Water Pump
Serial # C1751738

266
Steel Table
51" x 47" x 37", includes roll of #100 roller chain

267
Steel Table
48" x 40" x 37", includes contents: fire extinguishers, anti-freeze, 2 transducers, etc.

268
Fiberglass Sections
28" x 60", 1 new and 2 used, 22" pan, 8" side, for vibrating conveyor

269
Steel Shelf
64" x 31" x 72", 3 shelves, includes contents

270
Belts
Skid of new and used belts, various sizes, 44" x 8' x 1/4" white poly plate

271
Conveyor Belts
30" 2 rolls

272
Hydraulic Hoses
Skid of air, hydraulic, and acetylene hoses

273
Steel Shelf
All contents included on 2 shelves along wall

274
Steel Shelf
8' shelf with bearings, 10' shelf with sprockets and housings 

275
Steel Shelf
Contents on 3 shelves including bearings, carriage parts, belt lacings, welding rods, filters

276
Tool Box and Shelf
All contents included: chains, electric valves, bolts, etc.

277
Cutler Hammer Freedom 2100 Motor Control Center
4- 800 amp, 2- 600 amp, includes motor starters and breakers

278
Cutler Hammer Freedom 2100 Motor Control Center
20" x 90", includes starters and breakers

279
2 ACME Transformers
General purpose Siemens transformer

280
Autobar Power Capacitor Bank
Includes 2 boxes extra capacitors

281
Motor Breakers

282
Phone System and A/C Unit
GE 24200 BTU A/C, Clarity phone system

283
GE A/C Unit and Water Fountain
Elkay water fountain

284
Frigidaire Refrigerator

285
Pop Vending Machine

286
Snack Vending Machine

287
Display Case First Aid Box Peg Board

289
Air Hose, Water Hose, Hang-On Vacuum

290
Table and Contents
Welding rods, grease and grease gun, electrical wires, circuit boards, tarp, heaters

291
Jugs, Wires, Belt, Tailing Belt
Anti freeze, tannergas, extension cords, 4" tailing belt, etc.

292
Rods
46"

293
Chainsaw Parts and Fan
Hard hat, chaps, chain bar, welding helmet

294
4 Dyna Vision Laser
Model L400, 4 sections, electric valve, wood table

295
12 Fire Extinguishers
Various sizes

296
Fan and Chairs
3 folding chairs, 28" pedestal fan

297
Fax Machine and Copy Machine
Dell copy machine, laser printer E310dw,

298
Microwave and Table
Steel table, xfinity surge protector, earplug dispenser, toilet snake

299
Office Contents
Computer, printer, and bookshelf

300
Forestline Laser Light and 4 Grease Guns

301
Fromm Bander and 5/8" Banding
Model P327, 2 rolls banding, battery operated crimper with battery charger

302
Belts
Used, various sizes

303
Flex Track Chains

304
Electrical Items
Fuses, wires, valves

305
Air Hoses, Electric Wires, Heater, Fan

306
Bump Stop and Gas Cans
3 gas cans, 1 bard chain oil

307
Miscellaneous Items
Sprockets, tub of bolts, chain, A/C filter, chipper knife

308
4 Fire Extinguishers, Hydraulic Hose, Water Hose
Welding rods, 2 water hoses, miscellaneous electrical items

309
7 Fans
In green chain building

310
3 Heaters
In green chain building

311
Office Space and Contents
Desks, cabinets, chairs

312
Cummins Turbo
Serial # M1734897

313
Cabinet with First Aid
2 shelves filled

314
Closet with Office Items
Box with light bulbs, Phillips 40 watt

315
Conference Room with Contents
Frigidaire Refrigerator, 23 folding chairs, 3 folding tables, filing cabinet

316
Office Space and Contents
3 office chairs, 3 rolling chairs, 1 folding chair, part for Lewis scanner
Photo Gallery

























































































































































































































































































Save Listing As Favorite

Print Listing information

Share This Listing

  • Facebook
  • Email this Listing to a Friend





Other Sales by
This Company

Jan 1
Des Arc, AR

Oct 1
Middlebury, IN

Sponsored Links

Formerly Graham Lumber

Bright Star Realty and Auctions, INC

Bright Star Realty and Auctions, INC

Contact: Loren Beachy
Phone: 574-825-0704
Sale Location
860 Highway 142
Selmer, TN 38375
Sale Dates and Times
Tuesday Dec 14, 2021 Completed
Sale Terms and Conditions

There is a 13% online buyer’s premium in effect for all purchases. All items sell where is as is with no warranties or guarantees. Buyer is responsible to inspect all merchandise prior to placing bids. All items must be paid within 7 business days. Payment terms: Cash, check, wire transfer, or any major credit card. (additional 2% CC fee will be charged for CC payments). All items are pick-up only. Smalls must be removed within 2 days. Buyer shall assume responsibility of all property when auctioneer says sold. Auction company is not responsible for any missing or stolen items.



11751 CR 12 Middlebury IN 46540
Office 574.825.0704 • Fax 574.825.2757
Direct 260.350.8953 Eugene Hochstetler
Email: eh@brightstarauctions.com
Website: www.brightstarauctions.com
 
 

TERMS AND CONDITIONS OF SALE and MACHINERY REMOVAL

Equipment Bidding Terms: Full payment day of auction in the form of cash, personal check, business or company check or certified funds. Credit card payment is available for an additional 2% fee. See full auction terms for buyer’s premium and more information.

General liability insurance of no less than $1,000,000 shall be required to remove any machinery from the site, installed or not installed. This certificate will be required before entering the property to remove any items.

Full payment must be made or arranged before leaving premises and before machinery and equipment is removed.

Buyer shall indemnify and hold harmless the seller and auctioneer, its agents and employees from and against claims, damages, losses and expenses including, but not limited to attorney’s fees arising out of or resulting from purchase and removal of equipment.

Buyer will provide fire watch at buyer’s expense during cutting and welding activities associated with removal of equipment.


All descriptions are conscientiously described by the seller and Auctioneer; however, neither assumes any liability for errors or omissions. Everything sold as is where is with no expressed or implied warranties of any kind. No guarantee of merchantability or suitability for intended use is given or implied. The successful bidder is responsible for the lot purchases from the time the auctioneer calls it sold. Neither the auction company nor the seller assumes any responsibility for any injuries suffered while inspecting, buying, or removing machinery and equipment. Jurisdiction and venue regarding any legal dispute shall be in McNairy County, TN .


 

_______________________________
Buyer – Graham Lumber Company, Selmer Operation Auction Buyer #______________
December 14, 2021
 

 

 

 

 

 

 

 

Bidder Terms and Conditions

These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer.
 
  1. Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
 
  1. Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded, where required, as follows:
IN, IL , WI , KY , OH , VA , AR , NY, NC, TN, MO .
 
  1. Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer: “Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction. “Absentee Bidder” means a person or entity that submits an Absentee Bid.
“Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION.
“Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids.
“Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected and where a Buyer may pick up Personal Property.

“Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder.

“Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms.

“Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer.
"Buyer" means the Winning Bidder with respect to each Lot of Personal Property or of each parcel of Real Property.
"Buyer's Premium" is an amount with respect to each Lot of Personal Property or with respect to each parcel of Real Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account. For Real Property offered Subject to Seller’s Confirmation, the Buyer’s Premium will be calculated on the amount of the High Bid Subject to Confirmation.

“Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property or Real Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation.

“Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer.

“High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot or on a parcel of Real Property.

“High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on Real Property put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price.
 
“High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot or a parcel of Real Property.

"Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event.

“Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer.

“No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale.

“Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions.

“Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online.

"Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered.

“Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers.

“Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer).

“Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms- length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction.

“Property” means the Real Property and the Personal Property.

“Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium. "Registered Bidder" means a person or entity that has registered to bid at the Auction.

“Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction.
“Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE.

“Reserve Price” means the minimum price that Seller is willing to accept for specific Property.

“Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer.

“Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid.

“Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by
Seller).

"Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid.

“Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction.

“Without Reserve” means Absolute.
 
 
  1. Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.
 
  1. Auction Conducted in the State of Indiana.
 
    1. For Auctions in the State of Indiana and Online. All Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are entered into in the State of Indiana, all bids and payments are received in the State of Indiana, and the Realty Purchase Agreement, if any, will be formed and entered into in the State of Indiana.
    2. For Auctions outside of the State of Indiana. All Property is offered for sale in the state of the Auction Site, and will be sold in the state of the Auction Site. Notwithstanding the physical location of any Bidder or any Participant, these Terms are entered into in the state of the Auction Site, all bids and payments are received in the state of the Auction Site, and the Realty Purchase Agreement, if any, will be formed and entered into in the state of the Auction Site.
 
  1. Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.

The Buyer’s Premium for Personal Property will be amount equal to thirteen percent ( 13%) of the Hammer Price for each Lot Knocked Down at the Auction.

The Buyer’s Premium for Real Property will be amount equal to percent ( %) of the Hammer Price for each parcel of Real Property Knocked Down at the Auction.
 
  1. Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
  2. Nature of the Auction.

X The Auction for the Personal Property is an Absolute Auction.

The Auction for the Personal Property is With Reserve. Auctioneer may Withdraw any Lot offered With Reserve prior to the Fall of the Hammer.
 
  1. Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
 
  1. No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
 
  1. Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
 
    1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
 
    1. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
 
    1. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
 
    1. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
 
    1. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
 
    1. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
 
    1. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
 
    1. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.
 
    1. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties,
(i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
 
    1. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
 
    1. No Reduction or Retraction of Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.
 
    1. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.
 
    1. Online Bids. Online bids may not be reduced or retracted.
 
  1. Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). Absentee Bids may be initiated and advances in accordance with Auctioneer’s policies and procedures. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
 
  1. Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
 
  1. Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
 
  1.  
 
  1. Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
 
  1. Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot or item of Personal Property or each parcel of Real Property will be the Buyer of such Property.
 
  1. All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
 
  1. Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
 
  1. Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.
 
  1. Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or
representation by Auctioneer
 
  1. Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
  1.  
Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
 
  1. Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ring man, or multiple bid assistants or ring men, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
 
  1. Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the

vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
 
  1. All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
 
  1. Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked- Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
 
  1. Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases must be paid for within five (5) days after the close of the Auction. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.
 
  1. Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Disassembly and removal shall be done in a workmanlike manner, and each Buyer shall indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer's employees, agents, representatives, or independent contractors, in connection with the disassembly or removal of any Personal Property. Any and all damages to the Auction Site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller.
 
  1. Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them.
 
  1. Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.
 
  1. No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
 
  1. Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
 
  1. Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.




 
  1. Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled
to specific performance or other equitable relief.
 
  1. Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
 
  1. Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
 
  1. Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
 
  1. Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
 
  1. Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
 
  1. Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim, suit or cause of action relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
 
  1. Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their respective rights hereunder.

 
Listing Details
Liquidation of formerly Graham Lumber including Morbark and Fulghum debarkers, TMA carriage, Sherman Top Arbor thin kerf gang saw, 2013 Helle Scragg mill and much more. Don't miss your chance on this quality equipment. Consignments are welcome, call Myron @ 574.229.4341 to consign your equipment for free marketing.

3D39

1

00
Information Lot
TENNESSEE STATE AND LOCAL SALES TAX OF 9.25% WILL BE CHARGED. Please bring valid exemption certificates if you have them or provide them immediately upon receiving an invoice if you win a bid online. Buyers have 90 days to remove installed equipment
 

111

98
Heavy Equipment Key Set 24 Keys
Heavy Equipment Key Set 24 Keys. Kit includes keys for John Deere, Toyota, Yanmar, Hyster, CAT, Lull, Volvo, Case, Skytrack, Bobcat, Hybrid, Massey Ferguson, Snorkel, JLG, Upright, New Holland, Skyjack, Genie, Snorkel and many more.

124

99
Manual Sealless Steel Strapping Tool
Model A333, works for 1/2", 5/8" or 3/4" banding, new in box

132

100
Fulghum E1018 Rosserhead Debarker
Serial # F1-00-61, DED-320101-0320, 20' capacity, 7' x 30' overall, 40 HP electric motor, hydraulic kickers, includes cab and controls, electric shutoff, cab has A/C and is 4' x 5' x 7', includes structure steel to ground, one owner and overall in good condition, first lot of an entirety

135

101
4 Strand Log Deck with Stop 'N Load
14' x 24' overall, electric drive, includes catwalk on sides of deck and structural steel to ground, good condition

138

102
Belt Conveyor
26" belt, 10" sides, 3' x 85' overall, electric drive

139

103
Entirety Lot 100-102
With 10% raise

142

104
Schurman Log Boss 3-HB Carriage
RH 42" style C carriage, tong dog carriage, lineal position, air dogs, includes controls in cab, no setworks, 1st lot of an entirety

143

105
Carriage Track
62" center to center, 7' x 65' long overall

145

106
Rub Rail
17' 6" long, 38" tall

146

107
Tyrone Berry Carriage Feed
Model SMA-285-5, serial # G1349, DA-LM-50234-6, 150 HP motor, 5' x 8' x 6' tall overall, includes electric shut off

147

107A
Shotgun Drive

149

108
Shurman Operator's Cab
5' x 12' x 8' tall, insulated, has A/C

150

109
Lewis Control Scanner
20' long, no controls 

151

110
Entirety Lot 104-109
With 10% raise

152

111
5 Strand Log Deck with Stop 'N Load
13' x 37' x 5' tall, included structural steel to ground, electric drive

153

112
Bar-Type Log Turner
60" turner, 3' x 6' x 3' tall overall

154

113
Belt Conveyor
35" belt, 38" pan, 4' x 22' overall, electric drive

155

114
Lumber Transfer Bar
5' x 16', air cylinder

156

115
Drop Belt Conveyor
36" pan, 21" belt, 4' x 15' overall, air cylinder for lift, electric drive

157

116
Roll Case with Pop Up Transfer
4' 6" x 22', 36" long, 8 1/2" rolls, 2 3/16" shaft, 34" on center, 8' x 11' 4 strand pop up transfer, electric drive, air stop/pup up

158

117
5 Strand Pop Up Transfer Deck
6' x 14', air pop up, electric drive

159

118
Efurd Edger
Serial # C207-16-1194, 4' x 8' x 6' tall, has 2 laser lights, twin blade split arbor, includes electric motors, and lot # 119 and 120

121
GE Electric Motor
40 HP, 324T frame, 1780 RPM, includes electrical shut off

160

119
Infeed for Edger
Sells with edger, 4' x 8', 33" long, 4" rolls, 24" on center

122
Electric Motor on Edger
No tag

161

120
Tailing Belt
Sells with edger, 21' long, 5" belt, 6" x 12" frame, no slidepans included

162

122A
Hydraulic Pack
36" x 24" x 13" tank, 10 HP electric motor, includes valves, part of entirety-goes with edger lot 118

163

123
Entirety Lot 118-122
With 10% raise

124
Belt Conveyor
30" x 28' overall, 23" belt, electric drive

167

125
3 Strand 90 degree Transfer Deck
11' x 20', no drive, includes steel structure to first cross beam, no end sprockets on end that butts into next transfer deck, sells with lot # 126

171

126
4 Strand Transfer Deck
Sells with lot # 125, 12' 6" x 28', electric drive, H78B rooftop chain, includes steel legs to ground in building and no structural steel on outside

179

127
Shurman Thin Kerf Gangsaw
Model 10SEA48, serial # 3014, 8' x 14' x 7' tall, 22"-28" blades, 10" bottom arbor with clam shell opening, 50" capacity, very good feed rolls, does not include electric motors or outfeed, includes electric disconnect, sells with the infeed lot # 128, first lot of an entirety

181

127A
Gangsaw Blades
14- 28" blades, 8- blades on cart, cart for blades 32" x 60"

184

128
Infeed for Gang Saw
This lot will sell with the gang lot # 127, 8' x 22', 65" long, 8 1/2" rolls, 2 3/16" shaft, 30" spacing, hydraulic drive, 12' x 13', 6 strand pop up transfer with electric drive and cant stop, does not have idler sprockets on end of transfer

187

129
Outfeed for Gang Saw
5' x 17' roll case, 53" long, 8 1/2" rolls, 3' spacing, 8'- 4 strand pop up transfer, 2 3/16" shaft, hydraulic drive, 14' x 18' x 3' tall transfer deck, ties into rollcase, electric drive, air pop ups

195

130
Toshiba Electric Motor
Model B3004VLF4VM, serial # 95102163, 300 HP, 447TC frame, 1775 RPM, 3 PH

198

131
Toshiba Electric Motor
Model 4C4300L169931, serial # 130400870, 300 HP, 11780 RPM, 447TC frame, 3 PH

212

132
Teco Electric Motor
Serial # DF7535220002A, 30/20 HP, 364T frame, 1765/1185 RPM

225

132A
Hydraulic Pack
16" x 60" x 24" tank, 25 HP motor, has oil cooler, part of entirety-used on gang saw lot 150

227

133
Hydraulic Pack
2 electric drive hydraulic pumps, 1st tank is 2' x 3' x 42" tall, 2nd tank is 2' x 3' x 2'

231

134
Entirety Lot 127-134
With 10% raise

243

135
Belt Conveyor
32" x 24' overall, 18" belt, electric drive

255

136
Belt Conveyor
28" x 21", 18" belt, 22" pan, 6" sides, electric drive

331

137
Belt Conveyor
32" x 30', 23" belt, 25" pan, 8" sides, electric drive

343

138
4 Strand Transfer Deck
11' x 36' overall, electric drive, sells with lot # 140

347

139
5 Strand Transfer Deck
12' x 18', H78B rooftop chain, electric drive

351

140
4 Strand Incline Transfer Deck
8' x 11', does not include sprockets or shaft where it butts up to another transfer deck, no drive, sells with lot # 138

355

141
Morbark 640 Debarker
Hydraulic feed, electric head, structural steel to ground, 75 HP electric motor, first lot of an entirety

357

142
Emerson Electric Motor
75 HP, 11785 RPM, 365T frame

143
Morbark Debarker Infeed Trough
Serial # 284, 18' infeed trough, 13" cleat track, hydraulic drive, includes structural steel to ground, good chain

F

144
Morbark Debarker Outfeed Trough
20' long, 12' ladderback chain, hydraulic drive, 3 arm kicker, includes structural steel to ground, good chain

145
Morbark Debarker Cab
54" x 60" x 70" high, A/C, includes structural steel to ground

146
Morbark Hydraulic Unit
75 HP, includes cut off

147
Bark/Mulch Conveyor
25' x 25" wide, 18" pan, 12" sides, includes electric cut out, # 15 ladderback chain, 11" wide, electric drive

148
Entirety Lot 141-147
With 10% raise

149
4 Strand Log Deck with Stop 'N Load
Debarker deck, 13' x 30' with 3 stop and load arms, no drive, includes structural steel to ground

150
2013 Helle Scragg Mill
16' overhead end dogging w/vertical edger #1 & 2, S/N 201438, 50 HP each w/setwork position, 56" F7 saws, 20' tailing belt, rooftop deck under trailer to catch boards, independent vertical edgers and scraggs, C-55 rooftop chain, tipple section for slab dump or board, transfer to edger, air conditioned saw cab w/ setworks & monitors, S/N 201435, missing arbor and blades on one edger, very nice late model unit

151
Scragg Infeed Log Deck with Stop 'N Load
13' x 28', 4 chain, electric motor, 10 HP, serial # 135055958, legs to first I-beam, 36", includes structural steel to ground

152
Webster Vibrating Conveyor
50' x 36", 25" pan, 9" sides

153
Belt Conveyor
33" x 32', no drive, 25" pan, 12" sides, 20" belt, no drive

154
Belt Conveyor
24" x 28', 10" sides, 23" belt, legs to first I-beam, electric drive

155
Belt Conveyor
28" x 58', 22" pan, 8" sides, 19" belt, electric drive

156
Fan
30" master air fan

157
Control Panel
Electric, for scragg

158
3 Strand Transfer Deck
10' x 18', electric drive, includes structural steel to ground, sells with lot # 159

159
3 Strand Transfer Deck
18' x 8', electric drive, sells with lot # 158

161
4 Strand Transfer Deck
12' x 40', H78A chain, electric drive

160
Transfer Deck
3- 15' strand for transfer deck, no chain, no drive

162
6 Strand Unscrambler
15' x 7', electric drive, 8' deck on top with 5 end evener rolls

163
Belt Conveyor
28" x 26' x 46" high, 4" sides, 22" pan, 15" belt, electric drive

164
9 Saw Drop Saw Trimmer
20' capacity, 24" blades, includes control panel, 8 strand deck 18',

165
Transfer Deck
Slanted, attached to trimmer, 15' x 22', 7 strand, electric drive, no sprockets on 1 end

166
Belt Conveyor
36" x 35', 28" pan, 26" belt, 12" sides, electric drive, does not include apron

167
4 Strand Green Chain
12' x 112', 5 arm electric board stop, 42" high, electric drive

168
Corley Edger
Serial # T3-C531-004, 2- 18" moving blades, 34" x 9' infeed, 36" x 9' deck, 2 1/2" x 32" rolls, 40 HP motor, electric drive

169
Progress Chipper
Model 60, serial # 00 00 20, 650 RPM, bottom discharge 6 knife, includes electric cutoff, 60" wheel, first lot of an entirety

170
NAE Electric Motor
200 HP, 1185 RPM, 449T7

171
Chain Conveyor
19" x 7' flat and 9' slant, 11" pan, 16" sides, 9" ladderback chain, no drive

172
Chip Screen
6' x 6", 40" high, electric drive, 3/2 2 HP, model C526, serial # 26386

173
Concave Belt Conveyor
42" x 24', 26" belt, electric drive, no drive

174
Morbark Chip Blower
30" blower, 40 HP electric motor, dual chute

175
Entirety Lot 169-174
With 10% raise

176
Webster Vibrating Conveyor
36" x 25 1/2', 24" pan, 9 1/2" sides, electric drive, 5' fiberglass section, infeed to chipper

177
MDI XR-3000 Metal Detector
Serial # XRS-10852, does not include fiberglass section

178
Belt Conveyor
36" x 65', electric drive, 26" pan, 26" belt, 12" sides, NAE motor 7.5 HP, serial # 15042860W

179
Concave Belt Conveyor
38" x 40', 22" belt, electric drive

180
Belt Conveyor
20" x 28', electric drive, no drive, 18" pan, 15 1/2" belt, 6" sides

181
Chip Screen and Cyclone

182
Vibrating Conveyor
40" x 26', includes 5' x 26" fiberglass section, 22" pan, 8" side, electric drive

183
Belt Conveyor
36" x 110', 31" pan, 8" side, 29" belt, electric drive

183A
Belt Conveyor
36" x 13', 31" pan, 29" belt, 10" sides, electric drive

183B
Concave Belt Conveyor
48" x 50', 36" belt, 2 end no roll, no drive

184
Belt Conveyor
22" x 20', 18" pan, 8" sides, 15" belt, electric drive

185
Precision Vibrating Conveyor
Model 65, serial V-1511, 45" x 65', 36" pan, 8" sides, 15 HP motor model 5KE254BC205B, serial # HOH13746302H

186
Precision Vibrating Conveyor
Serial # V1512, 45" x 55', 36" pan, 8" sides, electric drive

187
Vibra-Pro Vibrating Belt
12' x 33", 18" pan, 12" side, 26' overall, 7' tapered section 18" to 9", fiberglass section 48" x 29', 18" pan, 5 1/2" side, electric drive

188
Concave Belt Conveyor

189
Belt Conveyor
36" x 80', 31" pan, 10" sides, 26" belt, includes cutoff and starter, cleated, electric drive, incline to trailer loading system

190
Twin Auger Trailer Loading Station
40' x 24' x 15' high, auger mission

191
Belt Conveyor
22" x 48' x 13" sides, 18" pan, 18' to incline, 30' incline to deck, 14" belt, includes structural steel to ground

192
5 Strand Transfer Deck
16' x 17' x 52" high, 1 strand no chain, electric motor but no gearbox

193
Hose Coil
Reel with high pressure hose, 70' hose

194
Hydraulic Pack
48" x 30" x 18", with oil cooler (no motor on cooler), 40 HP electric motor

195
Water Tank
36" high x 36" in diameter, loose valve

196
Hydraulic Pack
27" x 60" x 18" tank, 20 HP motor, oil cooler, with valves, used on lot 112

197
Quincy Air Compressor
Model QSF150-125, serial # G0472F, includes cutout, 150 HP, hours unknown

198
Silvan Twin Tank Air Dryer

199
Disscant Air Dryer
3' x 8' diameter, includes cutout

200A
Abel-Howe Crane
1 ton crane with trolley, 16' boom

201
Armstrong Grinder
Serial # 4562, #6 right hand sharpener for band saw

200
Entirety Lot 197-199
With 10% raise

202
Armstrong #16 Post Brackets
7 piece, band clamp and brackets

203
Armstrong Band Roller
Stretcher and Roller, electric motor

204
Hammering Bench
Top and bottom anvil

205
Armstrong Stretcher and Roller
Model 3-10C, serial # 9294, for circular saw, includes hammering table

206
Edger Blade Grinder

207
Wright Machine Grinder
Model W-150HD B, serial # A9535, gang saw sharpener

208
Wright Machine Grinder
Model W-350HO, serial # 69422, auto dual

209
Oregon Select Grinder
Model BSA 1000, 12" wheel

210
Precision Tub Grinder
Model 3K-440, serial # PAG-792, chipper knife grinder

211
Air Clamp

212
Babbitt Melting Pot
With updraft, includes chipper parts on bench, knife jigs, some new knife holders

213
Dual Head Resurfacer
Serial # 3014-10

214
Metal Work Bench
36" x 48" x 36" high

215
Metal Cabinet
Includes contents, grinding wheels, and stretcher parts

216
Midwest Fastener Drawer
Includes contents

217
Cart on Wheels
36" x 24" x 32", includes contents

218
Band Saw Blade
9" wide

219
4 Trimmer Blades
24", 1 3/8" arbor

220
6 Edger Blades
18" split blades, 2" and 3 1/4" arbor

221
Tools on Work Bench
48" hanchett back gauge, everything on bench and cabinet beneath

222
Torit Filter
Filter house and collector, includes dust pipe on inside of filling room

223
Goodman A/C and Heating Unit
serial # 1508037487, no duct work

224
Tank Holder
58" x 34" x 66", 4 shelf

225
Ice Box
92" x 36" x 64", 2 doors

226
Fans and Chairs
20" fan, 16" fan on wheels, 2 folding chairs, 1 wooden chair

227
Air Hoses, Floor Mats, Tarp, Vacuum, Water Cooler, Fire Extinguisher, Gas Can, Etc.

228
Emerson Microwave and Work Bench
48" x 36" x 38" workbench, fire extinguisher, utilidor wash tub, Sony radio

229
Allen Bradley Electrical Control Station
11' x 90", 5- 16" columns, 1- 28" column, includes single face transformer

230
Cutout and Starter
Scragg and Chipper electric control panel

230A
Allen Bradley PowerFlex 700*
VFD 150 HP 480V AC Drive, Excellent Condition, still in Original box

230B
Wiegmann N1C243008LP Electrical Housing*
New Large Enclosure, 30" X 24" X 8 5/8"

230C
Hoffmann C-SD30248 Concept Junction Box*
New Wall Mount Enclosure

230D
Landen Strapping Machine*
Model LP-9, Ser# 2191, Good Condition!

230E
PAC Strapping Machine*
Model PSM1412-IC3A, Ser# 608107414, Semiautomatic Strapper, 110 volt, single phase

230F
Kirko DOPAG Grease Transfer Pump*
For 5 gallon Bucket

230G
Kirko DOPAG Grease Transfer Pump*
For 5 Gallon Bucket

231
Monticello Steel Lined Dip Tank
20' x 7' x 6', hydraulic lift, includes controls and chemical barrel with pump

232
Merchandising Saw
80" saw, 100 HP motor, includes controls, first lot of an entirety

233
Operators Cab
48" x 50" x 6'

234
MI Hydraulic Pack
46" x 15" x 27" tank, 20 HP motor, with cutout, includes cooling unit

235
Belt Conveyor
12", 4" sides, 34' long, electric drive

236
Belt Conveyor
36" wide, 50' long, 30" belt, electric drive, 5 HP motor

237
Chain Conveyor Log Trough
40" wide, 18" pan, 17" cleats, 15' long, 56" high, electric drive

238
Chain Conveyor Log Trough
40" wide, 18" pan, 17" cleats, 50' long, 56" high, electric drive

238A
Electrical in small building

239
Entirety Lot 232-238
With 10% raise, includes electric control panels in building

240
Toledo Truck Scale
We will not offer this lot at auction. If you have interest please call Eugene. 70' long x 11' wide, 4 sections, Matko electronic readout, Mettler Toledo control panel

241
Sprinkler System
8 units, for log yard, no pump

242
Container Used for Tank
8' x 8' x 40', steel container, partially underground

243
Steel Building
We will not offer this lot at auction. If you have interest please call Eugene. Main building: 50' x 150' x 28' sidewalls, 2 story 10' to first floor, 20' x 20' addition on end 2 story, 30' x 40' addition on backside 2 story

244
Cat Walk and Stairs in Mill
Does not include any structural steel, catwalk and roof over dip tank only

245
Electrical Conduit and Wiring
All electrical in building not lotted with equipment, includes lighting

246
56" Saw Blade
F7 style

247
56" Saw Blade
F7 style

248
56" Saw Blade
F7 style

249
56" Saw Blade
F7 style

250
56" Saw Blade
F7 style

251
52" Saw Blade
F7 style, new saw

252
52" Saw Blade
F7 style, new saw

253
Air Powered Grease Pump
Fire-Ball 300, includes hose reel and barrel with grease

254
Handpump on Barrel
Barrel with oil

255
36" Fan
No motor

256
Metal Shelf
12" x 24" x 60", steel frame

257
Poly Wheelbarrow

258
Washer Parts
Model PW20G, needs new pump

259
Hydraulic Cylinder for Carriage
2 new cylinders

259A
Cylinder
Model 4 00CTCUTTLUN1.50041L, serial # B4851430001E

260
Metal Cabinet
28" x 24" x 76"

261
Roller
5 1/2" x 29", 1 15/16" x 65" shaft

262
North America Electric Motor
10 HP, 1770 RPM, 215T frame, inverter duty 20:1UT, new motor

263
Steel Table
8' x 24" x 36", contents included, 2 1/2" x 100' water hose, NAE electric motor, 3 HP, 1760 RPM, 182T frame, water hose

264
Briggs and Stratton
5.5 HP, OHV motor

265
Burks Water Pump
Serial # C1751738

266
Steel Table
51" x 47" x 37", includes roll of #100 roller chain

267
Steel Table
48" x 40" x 37", includes contents: fire extinguishers, anti-freeze, 2 transducers, etc.

268
Fiberglass Sections
28" x 60", 1 new and 2 used, 22" pan, 8" side, for vibrating conveyor

269
Steel Shelf
64" x 31" x 72", 3 shelves, includes contents

270
Belts
Skid of new and used belts, various sizes, 44" x 8' x 1/4" white poly plate

271
Conveyor Belts
30" 2 rolls

272
Hydraulic Hoses
Skid of air, hydraulic, and acetylene hoses

273
Steel Shelf
All contents included on 2 shelves along wall

274
Steel Shelf
8' shelf with bearings, 10' shelf with sprockets and housings 

275
Steel Shelf
Contents on 3 shelves including bearings, carriage parts, belt lacings, welding rods, filters

276
Tool Box and Shelf
All contents included: chains, electric valves, bolts, etc.

277
Cutler Hammer Freedom 2100 Motor Control Center
4- 800 amp, 2- 600 amp, includes motor starters and breakers

278
Cutler Hammer Freedom 2100 Motor Control Center
20" x 90", includes starters and breakers

279
2 ACME Transformers
General purpose Siemens transformer

280
Autobar Power Capacitor Bank
Includes 2 boxes extra capacitors

281
Motor Breakers

282
Phone System and A/C Unit
GE 24200 BTU A/C, Clarity phone system

283
GE A/C Unit and Water Fountain
Elkay water fountain

284
Frigidaire Refrigerator

285
Pop Vending Machine

286
Snack Vending Machine

287
Display Case First Aid Box Peg Board

289
Air Hose, Water Hose, Hang-On Vacuum

290
Table and Contents
Welding rods, grease and grease gun, electrical wires, circuit boards, tarp, heaters

291
Jugs, Wires, Belt, Tailing Belt
Anti freeze, tannergas, extension cords, 4" tailing belt, etc.

292
Rods
46"

293
Chainsaw Parts and Fan
Hard hat, chaps, chain bar, welding helmet

294
4 Dyna Vision Laser
Model L400, 4 sections, electric valve, wood table

295
12 Fire Extinguishers
Various sizes

296
Fan and Chairs
3 folding chairs, 28" pedestal fan

297
Fax Machine and Copy Machine
Dell copy machine, laser printer E310dw,

298
Microwave and Table
Steel table, xfinity surge protector, earplug dispenser, toilet snake

299
Office Contents
Computer, printer, and bookshelf

300
Forestline Laser Light and 4 Grease Guns

301
Fromm Bander and 5/8" Banding
Model P327, 2 rolls banding, battery operated crimper with battery charger

302
Belts
Used, various sizes

303
Flex Track Chains

304
Electrical Items
Fuses, wires, valves

305
Air Hoses, Electric Wires, Heater, Fan

306
Bump Stop and Gas Cans
3 gas cans, 1 bard chain oil

307
Miscellaneous Items
Sprockets, tub of bolts, chain, A/C filter, chipper knife

308
4 Fire Extinguishers, Hydraulic Hose, Water Hose
Welding rods, 2 water hoses, miscellaneous electrical items

309
7 Fans
In green chain building

310
3 Heaters
In green chain building

311
Office Space and Contents
Desks, cabinets, chairs

312
Cummins Turbo
Serial # M1734897

313
Cabinet with First Aid
2 shelves filled

314
Closet with Office Items
Box with light bulbs, Phillips 40 watt

315
Conference Room with Contents
Frigidaire Refrigerator, 23 folding chairs, 3 folding tables, filing cabinet

316
Office Space and Contents
3 office chairs, 3 rolling chairs, 1 folding chair, part for Lewis scanner
Gallery Images Loading, Please Wait...
  • Home
  • Hire an Auction Company
  • Add Your Auction Company
  • Member Login
  • Contact Us
  • Desktop Site
Return
Formerly Graham Lumber
 Live Auction
 
Auction Date(s)
Tuesday Dec 14, 2021 Completed
Auction Location

Selmer, TN 38375
Company
Bright Star Realty and Auctions, INC

Contact: Loren Beachy
Phone: 574-825-0704
Website: brightstarauctions.com

Listing Terms and Conditions

There is a 13% online buyer’s premium in effect for all purchases. All items sell where is as is with no warranties or guarantees. Buyer is responsible to inspect all merchandise prior to placing bids. All items must be paid within 7 business days. Payment terms: Cash, check, wire transfer, or any major credit card. (additional 2% CC fee will be charged for CC payments). All items are pick-up only. Smalls must be removed within 2 days. Buyer shall assume responsibility of all property when auctioneer says sold. Auction company is not responsible for any missing or stolen items.



11751 CR 12 Middlebury IN 46540
Office 574.825.0704 • Fax 574.825.2757
Direct 260.350.8953 Eugene Hochstetler
Email: eh@brightstarauctions.com
Website: www.brightstarauctions.com
 
 

TERMS AND CONDITIONS OF SALE and MACHINERY REMOVAL

Equipment Bidding Terms: Full payment day of auction in the form of cash, personal check, business or company check or certified funds. Credit card payment is available for an additional 2% fee. See full auction terms for buyer’s premium and more information.

General liability insurance of no less than $1,000,000 shall be required to remove any machinery from the site, installed or not installed. This certificate will be required before entering the property to remove any items.

Full payment must be made or arranged before leaving premises and before machinery and equipment is removed.

Buyer shall indemnify and hold harmless the seller and auctioneer, its agents and employees from and against claims, damages, losses and expenses including, but not limited to attorney’s fees arising out of or resulting from purchase and removal of equipment.

Buyer will provide fire watch at buyer’s expense during cutting and welding activities associated with removal of equipment.


All descriptions are conscientiously described by the seller and Auctioneer; however, neither assumes any liability for errors or omissions. Everything sold as is where is with no expressed or implied warranties of any kind. No guarantee of merchantability or suitability for intended use is given or implied. The successful bidder is responsible for the lot purchases from the time the auctioneer calls it sold. Neither the auction company nor the seller assumes any responsibility for any injuries suffered while inspecting, buying, or removing machinery and equipment. Jurisdiction and venue regarding any legal dispute shall be in McNairy County, TN .


 

_______________________________
Buyer – Graham Lumber Company, Selmer Operation Auction Buyer #______________
December 14, 2021
 

 

 

 

 

 

 

 

Bidder Terms and Conditions

These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer.
 
  1. Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
 
  1. Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded, where required, as follows:
IN, IL , WI , KY , OH , VA , AR , NY, NC, TN, MO .
 
  1. Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer: “Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction. “Absentee Bidder” means a person or entity that submits an Absentee Bid.
“Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION.
“Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids.
“Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected and where a Buyer may pick up Personal Property.

“Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder.

“Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms.

“Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer.
"Buyer" means the Winning Bidder with respect to each Lot of Personal Property or of each parcel of Real Property.
"Buyer's Premium" is an amount with respect to each Lot of Personal Property or with respect to each parcel of Real Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account. For Real Property offered Subject to Seller’s Confirmation, the Buyer’s Premium will be calculated on the amount of the High Bid Subject to Confirmation.

“Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property or Real Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation.

“Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer.

“High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot or on a parcel of Real Property.

“High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on Real Property put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price.
 
“High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot or a parcel of Real Property.

"Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event.

“Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer.

“No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale.

“Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions.

“Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online.

"Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered.

“Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers.

“Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer).

“Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms- length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction.

“Property” means the Real Property and the Personal Property.

“Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium. "Registered Bidder" means a person or entity that has registered to bid at the Auction.

“Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction.
“Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE.

“Reserve Price” means the minimum price that Seller is willing to accept for specific Property.

“Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer.

“Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid.

“Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by
Seller).

"Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid.

“Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction.

“Without Reserve” means Absolute.
 
 
  1. Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.
 
  1. Auction Conducted in the State of Indiana.
 
    1. For Auctions in the State of Indiana and Online. All Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are entered into in the State of Indiana, all bids and payments are received in the State of Indiana, and the Realty Purchase Agreement, if any, will be formed and entered into in the State of Indiana.
    2. For Auctions outside of the State of Indiana. All Property is offered for sale in the state of the Auction Site, and will be sold in the state of the Auction Site. Notwithstanding the physical location of any Bidder or any Participant, these Terms are entered into in the state of the Auction Site, all bids and payments are received in the state of the Auction Site, and the Realty Purchase Agreement, if any, will be formed and entered into in the state of the Auction Site.
 
  1. Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.

The Buyer’s Premium for Personal Property will be amount equal to thirteen percent ( 13%) of the Hammer Price for each Lot Knocked Down at the Auction.

The Buyer’s Premium for Real Property will be amount equal to percent ( %) of the Hammer Price for each parcel of Real Property Knocked Down at the Auction.
 
  1. Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
  2. Nature of the Auction.

X The Auction for the Personal Property is an Absolute Auction.

The Auction for the Personal Property is With Reserve. Auctioneer may Withdraw any Lot offered With Reserve prior to the Fall of the Hammer.
 
  1. Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
 
  1. No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
 
  1. Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
 
    1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
 
    1. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
 
    1. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
 
    1. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
 
    1. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
 
    1. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
 
    1. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
 
    1. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.
 
    1. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties,
(i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
 
    1. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
 
    1. No Reduction or Retraction of Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.
 
    1. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.
 
    1. Online Bids. Online bids may not be reduced or retracted.
 
  1. Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). Absentee Bids may be initiated and advances in accordance with Auctioneer’s policies and procedures. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
 
  1. Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
 
  1. Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
 
  1.  
 
  1. Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
 
  1. Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot or item of Personal Property or each parcel of Real Property will be the Buyer of such Property.
 
  1. All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
 
  1. Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
 
  1. Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.
 
  1. Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or
representation by Auctioneer
 
  1. Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
  1.  
Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
 
  1. Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ring man, or multiple bid assistants or ring men, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
 
  1. Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the

vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
 
  1. All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
 
  1. Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked- Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
 
  1. Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases must be paid for within five (5) days after the close of the Auction. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.
 
  1. Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Disassembly and removal shall be done in a workmanlike manner, and each Buyer shall indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer's employees, agents, representatives, or independent contractors, in connection with the disassembly or removal of any Personal Property. Any and all damages to the Auction Site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller.
 
  1. Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them.
 
  1. Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.
 
  1. No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
 
  1. Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
 
  1. Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.




 
  1. Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled
to specific performance or other equitable relief.
 
  1. Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
 
  1. Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
 
  1. Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
 
  1. Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
 
  1. Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
 
  1. Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim, suit or cause of action relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
 
  1. Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their respective rights hereunder.

 
Liquidation of formerly Graham Lumber including Morbark and Fulghum debarkers, TMA carriage, Sherman Top Arbor thin kerf gang saw, 2013 Helle Scragg mill and much more. Don't miss your chance on this quality equipment. Consignments are welcome, call Myron @ 574.229.4341 to consign your equipment for free marketing.

3D39

1

00
Information Lot
TENNESSEE STATE AND LOCAL SALES TAX OF 9.25% WILL BE CHARGED. Please bring valid exemption certificates if you have them or provide them immediately upon receiving an invoice if you win a bid online. Buyers have 90 days to remove installed equipment
 

111

98
Heavy Equipment Key Set 24 Keys
Heavy Equipment Key Set 24 Keys. Kit includes keys for John Deere, Toyota, Yanmar, Hyster, CAT, Lull, Volvo, Case, Skytrack, Bobcat, Hybrid, Massey Ferguson, Snorkel, JLG, Upright, New Holland, Skyjack, Genie, Snorkel and many more.

124

99
Manual Sealless Steel Strapping Tool
Model A333, works for 1/2", 5/8" or 3/4" banding, new in box

132

100
Fulghum E1018 Rosserhead Debarker
Serial # F1-00-61, DED-320101-0320, 20' capacity, 7' x 30' overall, 40 HP electric motor, hydraulic kickers, includes cab and controls, electric shutoff, cab has A/C and is 4' x 5' x 7', includes structure steel to ground, one owner and overall in good condition, first lot of an entirety

135

101
4 Strand Log Deck with Stop 'N Load
14' x 24' overall, electric drive, includes catwalk on sides of deck and structural steel to ground, good condition

138

102
Belt Conveyor
26" belt, 10" sides, 3' x 85' overall, electric drive

139

103
Entirety Lot 100-102
With 10% raise

142

104
Schurman Log Boss 3-HB Carriage
RH 42" style C carriage, tong dog carriage, lineal position, air dogs, includes controls in cab, no setworks, 1st lot of an entirety

143

105
Carriage Track
62" center to center, 7' x 65' long overall

145

106
Rub Rail
17' 6" long, 38" tall

146

107
Tyrone Berry Carriage Feed
Model SMA-285-5, serial # G1349, DA-LM-50234-6, 150 HP motor, 5' x 8' x 6' tall overall, includes electric shut off

147

107A
Shotgun Drive

149

108
Shurman Operator's Cab
5' x 12' x 8' tall, insulated, has A/C

150

109
Lewis Control Scanner
20' long, no controls 

151

110
Entirety Lot 104-109
With 10% raise

152

111
5 Strand Log Deck with Stop 'N Load
13' x 37' x 5' tall, included structural steel to ground, electric drive

153

112
Bar-Type Log Turner
60" turner, 3' x 6' x 3' tall overall

154

113
Belt Conveyor
35" belt, 38" pan, 4' x 22' overall, electric drive

155

114
Lumber Transfer Bar
5' x 16', air cylinder

156

115
Drop Belt Conveyor
36" pan, 21" belt, 4' x 15' overall, air cylinder for lift, electric drive

157

116
Roll Case with Pop Up Transfer
4' 6" x 22', 36" long, 8 1/2" rolls, 2 3/16" shaft, 34" on center, 8' x 11' 4 strand pop up transfer, electric drive, air stop/pup up

158

117
5 Strand Pop Up Transfer Deck
6' x 14', air pop up, electric drive

159

118
Efurd Edger
Serial # C207-16-1194, 4' x 8' x 6' tall, has 2 laser lights, twin blade split arbor, includes electric motors, and lot # 119 and 120

121
GE Electric Motor
40 HP, 324T frame, 1780 RPM, includes electrical shut off

160

119
Infeed for Edger
Sells with edger, 4' x 8', 33" long, 4" rolls, 24" on center

122
Electric Motor on Edger
No tag

161

120
Tailing Belt
Sells with edger, 21' long, 5" belt, 6" x 12" frame, no slidepans included

162

122A
Hydraulic Pack
36" x 24" x 13" tank, 10 HP electric motor, includes valves, part of entirety-goes with edger lot 118

163

123
Entirety Lot 118-122
With 10% raise

124
Belt Conveyor
30" x 28' overall, 23" belt, electric drive

167

125
3 Strand 90 degree Transfer Deck
11' x 20', no drive, includes steel structure to first cross beam, no end sprockets on end that butts into next transfer deck, sells with lot # 126

171

126
4 Strand Transfer Deck
Sells with lot # 125, 12' 6" x 28', electric drive, H78B rooftop chain, includes steel legs to ground in building and no structural steel on outside

179

127
Shurman Thin Kerf Gangsaw
Model 10SEA48, serial # 3014, 8' x 14' x 7' tall, 22"-28" blades, 10" bottom arbor with clam shell opening, 50" capacity, very good feed rolls, does not include electric motors or outfeed, includes electric disconnect, sells with the infeed lot # 128, first lot of an entirety

181

127A
Gangsaw Blades
14- 28" blades, 8- blades on cart, cart for blades 32" x 60"

184

128
Infeed for Gang Saw
This lot will sell with the gang lot # 127, 8' x 22', 65" long, 8 1/2" rolls, 2 3/16" shaft, 30" spacing, hydraulic drive, 12' x 13', 6 strand pop up transfer with electric drive and cant stop, does not have idler sprockets on end of transfer

187

129
Outfeed for Gang Saw
5' x 17' roll case, 53" long, 8 1/2" rolls, 3' spacing, 8'- 4 strand pop up transfer, 2 3/16" shaft, hydraulic drive, 14' x 18' x 3' tall transfer deck, ties into rollcase, electric drive, air pop ups

195

130
Toshiba Electric Motor
Model B3004VLF4VM, serial # 95102163, 300 HP, 447TC frame, 1775 RPM, 3 PH

198

131
Toshiba Electric Motor
Model 4C4300L169931, serial # 130400870, 300 HP, 11780 RPM, 447TC frame, 3 PH

212

132
Teco Electric Motor
Serial # DF7535220002A, 30/20 HP, 364T frame, 1765/1185 RPM

225

132A
Hydraulic Pack
16" x 60" x 24" tank, 25 HP motor, has oil cooler, part of entirety-used on gang saw lot 150

227

133
Hydraulic Pack
2 electric drive hydraulic pumps, 1st tank is 2' x 3' x 42" tall, 2nd tank is 2' x 3' x 2'

231

134
Entirety Lot 127-134
With 10% raise

243

135
Belt Conveyor
32" x 24' overall, 18" belt, electric drive

255

136
Belt Conveyor
28" x 21", 18" belt, 22" pan, 6" sides, electric drive

331

137
Belt Conveyor
32" x 30', 23" belt, 25" pan, 8" sides, electric drive

343

138
4 Strand Transfer Deck
11' x 36' overall, electric drive, sells with lot # 140

347

139
5 Strand Transfer Deck
12' x 18', H78B rooftop chain, electric drive

351

140
4 Strand Incline Transfer Deck
8' x 11', does not include sprockets or shaft where it butts up to another transfer deck, no drive, sells with lot # 138

355

141
Morbark 640 Debarker
Hydraulic feed, electric head, structural steel to ground, 75 HP electric motor, first lot of an entirety

357

142
Emerson Electric Motor
75 HP, 11785 RPM, 365T frame

143
Morbark Debarker Infeed Trough
Serial # 284, 18' infeed trough, 13" cleat track, hydraulic drive, includes structural steel to ground, good chain

F

144
Morbark Debarker Outfeed Trough
20' long, 12' ladderback chain, hydraulic drive, 3 arm kicker, includes structural steel to ground, good chain

145
Morbark Debarker Cab
54" x 60" x 70" high, A/C, includes structural steel to ground

146
Morbark Hydraulic Unit
75 HP, includes cut off

147
Bark/Mulch Conveyor
25' x 25" wide, 18" pan, 12" sides, includes electric cut out, # 15 ladderback chain, 11" wide, electric drive

148
Entirety Lot 141-147
With 10% raise

149
4 Strand Log Deck with Stop 'N Load
Debarker deck, 13' x 30' with 3 stop and load arms, no drive, includes structural steel to ground

150
2013 Helle Scragg Mill
16' overhead end dogging w/vertical edger #1 & 2, S/N 201438, 50 HP each w/setwork position, 56" F7 saws, 20' tailing belt, rooftop deck under trailer to catch boards, independent vertical edgers and scraggs, C-55 rooftop chain, tipple section for slab dump or board, transfer to edger, air conditioned saw cab w/ setworks & monitors, S/N 201435, missing arbor and blades on one edger, very nice late model unit

151
Scragg Infeed Log Deck with Stop 'N Load
13' x 28', 4 chain, electric motor, 10 HP, serial # 135055958, legs to first I-beam, 36", includes structural steel to ground

152
Webster Vibrating Conveyor
50' x 36", 25" pan, 9" sides

153
Belt Conveyor
33" x 32', no drive, 25" pan, 12" sides, 20" belt, no drive

154
Belt Conveyor
24" x 28', 10" sides, 23" belt, legs to first I-beam, electric drive

155
Belt Conveyor
28" x 58', 22" pan, 8" sides, 19" belt, electric drive

156
Fan
30" master air fan

157
Control Panel
Electric, for scragg

158
3 Strand Transfer Deck
10' x 18', electric drive, includes structural steel to ground, sells with lot # 159

159
3 Strand Transfer Deck
18' x 8', electric drive, sells with lot # 158

161
4 Strand Transfer Deck
12' x 40', H78A chain, electric drive

160
Transfer Deck
3- 15' strand for transfer deck, no chain, no drive

162
6 Strand Unscrambler
15' x 7', electric drive, 8' deck on top with 5 end evener rolls

163
Belt Conveyor
28" x 26' x 46" high, 4" sides, 22" pan, 15" belt, electric drive

164
9 Saw Drop Saw Trimmer
20' capacity, 24" blades, includes control panel, 8 strand deck 18',

165
Transfer Deck
Slanted, attached to trimmer, 15' x 22', 7 strand, electric drive, no sprockets on 1 end

166
Belt Conveyor
36" x 35', 28" pan, 26" belt, 12" sides, electric drive, does not include apron

167
4 Strand Green Chain
12' x 112', 5 arm electric board stop, 42" high, electric drive

168
Corley Edger
Serial # T3-C531-004, 2- 18" moving blades, 34" x 9' infeed, 36" x 9' deck, 2 1/2" x 32" rolls, 40 HP motor, electric drive

169
Progress Chipper
Model 60, serial # 00 00 20, 650 RPM, bottom discharge 6 knife, includes electric cutoff, 60" wheel, first lot of an entirety

170
NAE Electric Motor
200 HP, 1185 RPM, 449T7

171
Chain Conveyor
19" x 7' flat and 9' slant, 11" pan, 16" sides, 9" ladderback chain, no drive

172
Chip Screen
6' x 6", 40" high, electric drive, 3/2 2 HP, model C526, serial # 26386

173
Concave Belt Conveyor
42" x 24', 26" belt, electric drive, no drive

174
Morbark Chip Blower
30" blower, 40 HP electric motor, dual chute

175
Entirety Lot 169-174
With 10% raise

176
Webster Vibrating Conveyor
36" x 25 1/2', 24" pan, 9 1/2" sides, electric drive, 5' fiberglass section, infeed to chipper

177
MDI XR-3000 Metal Detector
Serial # XRS-10852, does not include fiberglass section

178
Belt Conveyor
36" x 65', electric drive, 26" pan, 26" belt, 12" sides, NAE motor 7.5 HP, serial # 15042860W

179
Concave Belt Conveyor
38" x 40', 22" belt, electric drive

180
Belt Conveyor
20" x 28', electric drive, no drive, 18" pan, 15 1/2" belt, 6" sides

181
Chip Screen and Cyclone

182
Vibrating Conveyor
40" x 26', includes 5' x 26" fiberglass section, 22" pan, 8" side, electric drive

183
Belt Conveyor
36" x 110', 31" pan, 8" side, 29" belt, electric drive

183A
Belt Conveyor
36" x 13', 31" pan, 29" belt, 10" sides, electric drive

183B
Concave Belt Conveyor
48" x 50', 36" belt, 2 end no roll, no drive

184
Belt Conveyor
22" x 20', 18" pan, 8" sides, 15" belt, electric drive

185
Precision Vibrating Conveyor
Model 65, serial V-1511, 45" x 65', 36" pan, 8" sides, 15 HP motor model 5KE254BC205B, serial # HOH13746302H

186
Precision Vibrating Conveyor
Serial # V1512, 45" x 55', 36" pan, 8" sides, electric drive

187
Vibra-Pro Vibrating Belt
12' x 33", 18" pan, 12" side, 26' overall, 7' tapered section 18" to 9", fiberglass section 48" x 29', 18" pan, 5 1/2" side, electric drive

188
Concave Belt Conveyor

189
Belt Conveyor
36" x 80', 31" pan, 10" sides, 26" belt, includes cutoff and starter, cleated, electric drive, incline to trailer loading system

190
Twin Auger Trailer Loading Station
40' x 24' x 15' high, auger mission

191
Belt Conveyor
22" x 48' x 13" sides, 18" pan, 18' to incline, 30' incline to deck, 14" belt, includes structural steel to ground

192
5 Strand Transfer Deck
16' x 17' x 52" high, 1 strand no chain, electric motor but no gearbox

193
Hose Coil
Reel with high pressure hose, 70' hose

194
Hydraulic Pack
48" x 30" x 18", with oil cooler (no motor on cooler), 40 HP electric motor

195
Water Tank
36" high x 36" in diameter, loose valve

196
Hydraulic Pack
27" x 60" x 18" tank, 20 HP motor, oil cooler, with valves, used on lot 112

197
Quincy Air Compressor
Model QSF150-125, serial # G0472F, includes cutout, 150 HP, hours unknown

198
Silvan Twin Tank Air Dryer

199
Disscant Air Dryer
3' x 8' diameter, includes cutout

200A
Abel-Howe Crane
1 ton crane with trolley, 16' boom

201
Armstrong Grinder
Serial # 4562, #6 right hand sharpener for band saw

200
Entirety Lot 197-199
With 10% raise

202
Armstrong #16 Post Brackets
7 piece, band clamp and brackets

203
Armstrong Band Roller
Stretcher and Roller, electric motor

204
Hammering Bench
Top and bottom anvil

205
Armstrong Stretcher and Roller
Model 3-10C, serial # 9294, for circular saw, includes hammering table

206
Edger Blade Grinder

207
Wright Machine Grinder
Model W-150HD B, serial # A9535, gang saw sharpener

208
Wright Machine Grinder
Model W-350HO, serial # 69422, auto dual

209
Oregon Select Grinder
Model BSA 1000, 12" wheel

210
Precision Tub Grinder
Model 3K-440, serial # PAG-792, chipper knife grinder

211
Air Clamp

212
Babbitt Melting Pot
With updraft, includes chipper parts on bench, knife jigs, some new knife holders

213
Dual Head Resurfacer
Serial # 3014-10

214
Metal Work Bench
36" x 48" x 36" high

215
Metal Cabinet
Includes contents, grinding wheels, and stretcher parts

216
Midwest Fastener Drawer
Includes contents

217
Cart on Wheels
36" x 24" x 32", includes contents

218
Band Saw Blade
9" wide

219
4 Trimmer Blades
24", 1 3/8" arbor

220
6 Edger Blades
18" split blades, 2" and 3 1/4" arbor

221
Tools on Work Bench
48" hanchett back gauge, everything on bench and cabinet beneath

222
Torit Filter
Filter house and collector, includes dust pipe on inside of filling room

223
Goodman A/C and Heating Unit
serial # 1508037487, no duct work

224
Tank Holder
58" x 34" x 66", 4 shelf

225
Ice Box
92" x 36" x 64", 2 doors

226
Fans and Chairs
20" fan, 16" fan on wheels, 2 folding chairs, 1 wooden chair

227
Air Hoses, Floor Mats, Tarp, Vacuum, Water Cooler, Fire Extinguisher, Gas Can, Etc.

228
Emerson Microwave and Work Bench
48" x 36" x 38" workbench, fire extinguisher, utilidor wash tub, Sony radio

229
Allen Bradley Electrical Control Station
11' x 90", 5- 16" columns, 1- 28" column, includes single face transformer

230
Cutout and Starter
Scragg and Chipper electric control panel

230A
Allen Bradley PowerFlex 700*
VFD 150 HP 480V AC Drive, Excellent Condition, still in Original box

230B
Wiegmann N1C243008LP Electrical Housing*
New Large Enclosure, 30" X 24" X 8 5/8"

230C
Hoffmann C-SD30248 Concept Junction Box*
New Wall Mount Enclosure

230D
Landen Strapping Machine*
Model LP-9, Ser# 2191, Good Condition!

230E
PAC Strapping Machine*
Model PSM1412-IC3A, Ser# 608107414, Semiautomatic Strapper, 110 volt, single phase

230F
Kirko DOPAG Grease Transfer Pump*
For 5 gallon Bucket

230G
Kirko DOPAG Grease Transfer Pump*
For 5 Gallon Bucket

231
Monticello Steel Lined Dip Tank
20' x 7' x 6', hydraulic lift, includes controls and chemical barrel with pump

232
Merchandising Saw
80" saw, 100 HP motor, includes controls, first lot of an entirety

233
Operators Cab
48" x 50" x 6'

234
MI Hydraulic Pack
46" x 15" x 27" tank, 20 HP motor, with cutout, includes cooling unit

235
Belt Conveyor
12", 4" sides, 34' long, electric drive

236
Belt Conveyor
36" wide, 50' long, 30" belt, electric drive, 5 HP motor

237
Chain Conveyor Log Trough
40" wide, 18" pan, 17" cleats, 15' long, 56" high, electric drive

238
Chain Conveyor Log Trough
40" wide, 18" pan, 17" cleats, 50' long, 56" high, electric drive

238A
Electrical in small building

239
Entirety Lot 232-238
With 10% raise, includes electric control panels in building

240
Toledo Truck Scale
We will not offer this lot at auction. If you have interest please call Eugene. 70' long x 11' wide, 4 sections, Matko electronic readout, Mettler Toledo control panel

241
Sprinkler System
8 units, for log yard, no pump

242
Container Used for Tank
8' x 8' x 40', steel container, partially underground

243
Steel Building
We will not offer this lot at auction. If you have interest please call Eugene. Main building: 50' x 150' x 28' sidewalls, 2 story 10' to first floor, 20' x 20' addition on end 2 story, 30' x 40' addition on backside 2 story

244
Cat Walk and Stairs in Mill
Does not include any structural steel, catwalk and roof over dip tank only

245
Electrical Conduit and Wiring
All electrical in building not lotted with equipment, includes lighting

246
56" Saw Blade
F7 style

247
56" Saw Blade
F7 style

248
56" Saw Blade
F7 style

249
56" Saw Blade
F7 style

250
56" Saw Blade
F7 style

251
52" Saw Blade
F7 style, new saw

252
52" Saw Blade
F7 style, new saw

253
Air Powered Grease Pump
Fire-Ball 300, includes hose reel and barrel with grease

254
Handpump on Barrel
Barrel with oil

255
36" Fan
No motor

256
Metal Shelf
12" x 24" x 60", steel frame

257
Poly Wheelbarrow

258
Washer Parts
Model PW20G, needs new pump

259
Hydraulic Cylinder for Carriage
2 new cylinders

259A
Cylinder
Model 4 00CTCUTTLUN1.50041L, serial # B4851430001E

260
Metal Cabinet
28" x 24" x 76"

261
Roller
5 1/2" x 29", 1 15/16" x 65" shaft

262
North America Electric Motor
10 HP, 1770 RPM, 215T frame, inverter duty 20:1UT, new motor

263
Steel Table
8' x 24" x 36", contents included, 2 1/2" x 100' water hose, NAE electric motor, 3 HP, 1760 RPM, 182T frame, water hose

264
Briggs and Stratton
5.5 HP, OHV motor

265
Burks Water Pump
Serial # C1751738

266
Steel Table
51" x 47" x 37", includes roll of #100 roller chain

267
Steel Table
48" x 40" x 37", includes contents: fire extinguishers, anti-freeze, 2 transducers, etc.

268
Fiberglass Sections
28" x 60", 1 new and 2 used, 22" pan, 8" side, for vibrating conveyor

269
Steel Shelf
64" x 31" x 72", 3 shelves, includes contents

270
Belts
Skid of new and used belts, various sizes, 44" x 8' x 1/4" white poly plate

271
Conveyor Belts
30" 2 rolls

272
Hydraulic Hoses
Skid of air, hydraulic, and acetylene hoses

273
Steel Shelf
All contents included on 2 shelves along wall

274
Steel Shelf
8' shelf with bearings, 10' shelf with sprockets and housings 

275
Steel Shelf
Contents on 3 shelves including bearings, carriage parts, belt lacings, welding rods, filters

276
Tool Box and Shelf
All contents included: chains, electric valves, bolts, etc.

277
Cutler Hammer Freedom 2100 Motor Control Center
4- 800 amp, 2- 600 amp, includes motor starters and breakers

278
Cutler Hammer Freedom 2100 Motor Control Center
20" x 90", includes starters and breakers

279
2 ACME Transformers
General purpose Siemens transformer

280
Autobar Power Capacitor Bank
Includes 2 boxes extra capacitors

281
Motor Breakers

282
Phone System and A/C Unit
GE 24200 BTU A/C, Clarity phone system

283
GE A/C Unit and Water Fountain
Elkay water fountain

284
Frigidaire Refrigerator

285
Pop Vending Machine

286
Snack Vending Machine

287
Display Case First Aid Box Peg Board

289
Air Hose, Water Hose, Hang-On Vacuum

290
Table and Contents
Welding rods, grease and grease gun, electrical wires, circuit boards, tarp, heaters

291
Jugs, Wires, Belt, Tailing Belt
Anti freeze, tannergas, extension cords, 4" tailing belt, etc.

292
Rods
46"

293
Chainsaw Parts and Fan
Hard hat, chaps, chain bar, welding helmet

294
4 Dyna Vision Laser
Model L400, 4 sections, electric valve, wood table

295
12 Fire Extinguishers
Various sizes

296
Fan and Chairs
3 folding chairs, 28" pedestal fan

297
Fax Machine and Copy Machine
Dell copy machine, laser printer E310dw,

298
Microwave and Table
Steel table, xfinity surge protector, earplug dispenser, toilet snake

299
Office Contents
Computer, printer, and bookshelf

300
Forestline Laser Light and 4 Grease Guns

301
Fromm Bander and 5/8" Banding
Model P327, 2 rolls banding, battery operated crimper with battery charger

302
Belts
Used, various sizes

303
Flex Track Chains

304
Electrical Items
Fuses, wires, valves

305
Air Hoses, Electric Wires, Heater, Fan

306
Bump Stop and Gas Cans
3 gas cans, 1 bard chain oil

307
Miscellaneous Items
Sprockets, tub of bolts, chain, A/C filter, chipper knife

308
4 Fire Extinguishers, Hydraulic Hose, Water Hose
Welding rods, 2 water hoses, miscellaneous electrical items

309
7 Fans
In green chain building

310
3 Heaters
In green chain building

311
Office Space and Contents
Desks, cabinets, chairs

312
Cummins Turbo
Serial # M1734897

313
Cabinet with First Aid
2 shelves filled

314
Closet with Office Items
Box with light bulbs, Phillips 40 watt

315
Conference Room with Contents
Frigidaire Refrigerator, 23 folding chairs, 3 folding tables, filing cabinet

316
Office Space and Contents
3 office chairs, 3 rolling chairs, 1 folding chair, part for Lewis scanner