Equipment Showcase Auction
Previous Page Listing ID#: 1290871

Auction Location

Middlebury, IN 46540
Auction Dates and TimesSALE IS COMPLETED
Thursday Jul 1, 2021 Completed
Auction Type
 Live Auction 
Company Information
Bright Star Realty and Auctions, INC

Contact: Loren Beachy
Phone: 574-825-0704
Email: beachyauctions@gmail.com
Website: brightstarauctions.com

GoToAuction.com ID#: 5286
View company information and listings

Free Email Notifications

Sign up for the GoToAuction.com email notifications and we will let you know about sales in your area!  You may set up alerts by area (zip and radius), keywords, and by company.  It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions

Cash, check, or major credit card(with 2% con. fee). 10% buyers premium applies to onsite bidders. 13% buyers premium online , 7% sales tax will be in effect , buyers are welcome to fill out a valid exemption. All items are sold without reserve. 

Bidder Terms and Conditions

These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer.
 
  1. Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
 
  1. Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded, where required, as follows:
IN, IL , WI , KY , OH , VA , AR , NY, NC, TN, MO .
 
  1. Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer: “Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction. “Absentee Bidder” means a person or entity that submits an Absentee Bid.
“Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION.
“Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids.
“Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected and where a Buyer may pick up Personal Property.

“Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder.

“Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms.

“Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer.
"Buyer" means the Winning Bidder with respect to each Lot of Personal Property or of each parcel of Real Property.
"Buyer's Premium" is an amount with respect to each Lot of Personal Property or with respect to each parcel of Real Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account. For Real Property offered Subject to Seller’s Confirmation, the Buyer’s Premium will be calculated on the amount of the High Bid Subject to Confirmation.

“Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property or Real Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation.

“Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer.

“High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot or on a parcel of Real Property.

“High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on Real Property put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price.
 
“High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot or a parcel of Real Property.

"Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event.

“Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer.

“No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale.

“Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions.

“Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online.

"Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered.

“Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers.

“Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer).

“Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms- length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction.

“Property” means the Real Property and the Personal Property.

“Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium. "Registered Bidder" means a person or entity that has registered to bid at the Auction.

“Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction.
“Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE.

“Reserve Price” means the minimum price that Seller is willing to accept for specific Property.

“Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer.

“Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid.

“Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by
Seller).

"Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid.

“Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction.

“Without Reserve” means Absolute.
 
 
  1. Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.
 
  1. Auction Conducted in the State of Indiana.
 
    1. For Auctions in the State of Indiana and Online. All Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are entered into in the State of Indiana, all bids and payments are received in the State of Indiana, and the Realty Purchase Agreement, if any, will be formed and entered into in the State of Indiana.
    2. For Auctions outside of the State of Indiana. All Property is offered for sale in the state of the Auction Site, and will be sold in the state of the Auction Site. Notwithstanding the physical location of any Bidder or any Participant, these Terms are entered into in the state of the Auction Site, all bids and payments are received in the state of the Auction Site, and the Realty Purchase Agreement, if any, will be formed and entered into in the state of the Auction Site.
 
  1. Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.

The Buyer’s Premium for Personal Property will be amount equal to thirteen percent ( 13%) of the Hammer Price for each Lot Knocked Down at the Auction.

The Buyer’s Premium for Real Property will be amount equal to percent ( %) of the Hammer Price for each parcel of Real Property Knocked Down at the Auction.
 
  1. Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
  2. Nature of the Auction.

X The Auction for the Personal Property is an Absolute Auction.

The Auction for the Personal Property is With Reserve. Auctioneer may Withdraw any Lot offered With Reserve prior to the Fall of the Hammer.
 
  1. Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
 
  1. No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
 
  1. Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
 
    1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
 
    1. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
 
    1. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
 
    1. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
 
    1. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
 
    1. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
 
    1. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
 
    1. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.
 
    1. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties,
(i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
 
    1. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
 
    1. No Reduction or Retraction of Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.
 
    1. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.
 
    1. Online Bids. Online bids may not be reduced or retracted.
 
  1. Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). Absentee Bids may be initiated and advances in accordance with Auctioneer’s policies and procedures. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
 
  1. Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
 
  1. Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
 
  1.  
 
  1. Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
 
  1. Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot or item of Personal Property or each parcel of Real Property will be the Buyer of such Property.
 
  1. All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
 
  1. Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
 
  1. Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.
 
  1. Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or
representation by Auctioneer
 
  1. Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
  1.  
Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
 
  1. Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ring man, or multiple bid assistants or ring men, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
 
  1. Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the

vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
 
  1. All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
 
  1. Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked- Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
 
  1. Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases must be paid for within five (5) days after the close of the Auction. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.
 
  1. Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Disassembly and removal shall be done in a workmanlike manner, and each Buyer shall indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer's employees, agents, representatives, or independent contractors, in connection with the disassembly or removal of any Personal Property. Any and all damages to the Auction Site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller.
 
  1. Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them.
 
  1. Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.
 
  1. No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
 
  1. Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
 
  1. Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.




 
  1. Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled
to specific performance or other equitable relief.
 
  1. Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
 
  1. Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
 
  1. Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
 
  1. Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
 
  1. Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
 
  1. Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim, suit or cause of action relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
 
  1. Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their respective rights hereunder.

Listing Information
Equipment Showcase Auction
Skid loaders ~ Excavating~ Construction Equipment
At Absolute Auction!



Consign now
for FREE
advertising!
Consignments are
wanted including:
• Contractor’s Equipment
• Excavating Equipment
• Trailers
• Skid loaders
• Power Tools
 

00
Information Lot
No minimums, no reserves. Auction will begin at 9:00 AM. Live, phone, and online bidding available. Call Bronson with questions 574.210.3721. Loadout M-F from 8-4. 

01
Selling to Onsite Bidders only starting at 9 AM.
Brand new DeWalt, Makita, and Milwaukee tools, batteries etc.

82
AR 500 Steel Spinner Target 3/8"
AR 500 Steel Spinner Target 3/8"

83
AR 500 Steel Spinner Target 3/8"
AR 500 Steel Spinner Target 3/8"

84
AR 500 Steel Spinner Target 3/8"
AR 500 Steel Spinner Target 3/8"

85
New AR 500 Gong Target 3/8''
New AR 500 Gong Target 3/8''

86
New AR 500 Gong Target 3/8''
New AR 500 Gong Target 3/8''

87
New AR 500 Gong Target 3/8''
New AR 500 Gong Target 3/8''

88
New AR 500 Gong Target 3/8''
New AR 500 Gong Target 3/8''

89
New 3/8" AR 500 Steel Coyote Shooting Target With Heart Flapper
New 3/8" AR 500 Steel Coyote Shooting Target With Heart Flapper

90
New 3/8" AR 500 Steel Coyote Shooting Target With Heart Flapper
New 3/8" AR 500 Steel Coyote Shooting Target With Heart Flapper

91
New 3/8" AR 500 Steel Bear Shooting Target With Heart Flapper
New 3/8" AR 500 Steel Bear Shooting Target With Heart Flapper

92
New 3/8" AR 500 Steel Deer Shooting Target With Heart Flapper
New 3/8" AR 500 Steel Deer Shooting Target With Heart Flapper

93
New 3/8" AR 500 Steel Deer Shooting Target With Heart Flapper
New 3/8" AR 500 Steel Deer Shooting Target With Heart Flapper

94
New 30" x 57" Work Table Unfinished 5/16" Top
New 30" x 57" Work Table Unfinished 5/16" Top

95
New 30" x 57" Work Table Unfinished 5/16" Top
New 30" x 57" Work Table Unfinished 5/16" Top

96
New 30" x 57" Work Table Unfinished 5/16" Top
New 30" x 57" Work Table Unfinished 5/16" Top

97
New 30" x 57" Work Table Unfinished 5/16" Top
New 30" x 57" Work Table Unfinished 5/16" Top

98
New 30" x 57" Work Table Unfinished 5/16" Top
New 30" x 57" Work Table Unfinished 5/16" Top

99
New 30" x 57" Work Table Unfinished 5/16" Top
New 30" x 57" Work Table Unfinished 5/16" Top

100
New 30" x 57" Work Table Black 5/16" Top
New 30" x 57" Work Table Black 5/16" Top

101
New 30" x 57" Work Table Black 5/16" Top
New 30" x 57" Work Table Black 5/16" Top

102
New 30" x 57" Work Table Black 5/16" Top
New 30" x 57" Work Table Black 5/16" Top

103
New 30" x 57" Work Table Black 5/16" Top
New 30" x 57" Work Table Black 5/16" Top

104
New 30" x 57" Work Table Black 5/16" Top
New 30" x 57" Work Table Black 5/16" Top

105
New 30" x 57" Work Table Black 5/16" Top
New 30" x 57" Work Table Black 5/16" Top

106
New 26" x 60" Work Bench Black
New 26" x 60" Work Bench Black

107
New 26" x 60" Work Bench Black
New 26" x 60" Work Bench Black

108
New 26" x 60" Work Bench Black
New 26" x 60" Work Bench Black

109
New 26" x 60" Work Bench Black
New 26" x 60" Work Bench Black

110
New 26" x 60" Work Bench Black
New 26" x 60" Work Bench Black

111
New 26" x 60" Work Bench Black
New 26" x 60" Work Bench Black

165
Magnum 4000 Hot Water Pressure Washer
Magnum 4000 Hot Water Pressure Washer on wheels.   It has a 15 hp gas engine and a diesel powered hot water burner. It runs 3.5 GPM at 4'000 PSI. It has electric and recoil start, It is less that 1 year old and is in good working condition.

112
New 30" x 90" Steel Work Bench
New 30" x 90" Steel Work Bench

166
Pallet of Hoses
Pallet of Hoses, Gardend hoses and a high pressure hose.  

113
New 30" x 90" Steel Work Bench
New 30" x 90" Steel Work Bench

114
New 30" x 90" Steel Work Bench
New 30" x 90" Steel Work Bench

115
New 30" x 90" Steel Work Bench
New 30" x 90" Steel Work Bench

116
New 90" Cattle Feeder Orange
New 90" Cattle Feeder Orange

117
New 90" Cattle Feeder Orange
New 90" Cattle Feeder Orange

118
New 90" Cattle Feeder Orange
New 90" Cattle Feeder Orange

119
New 90" Cattle Feeder Orange
New 90" Cattle Feeder Orange

120
New 90" Cattle Feeder Orange
New 90" Cattle Feeder Orange

121
New 90" Cattle Feeder Orange
New 90" Cattle Feeder Orange

122
New 90" Cattle Feeder Green
New 90" Cattle Feeder Green

123
New 90" Cattle Feeder Green
New 90" Cattle Feeder Green

124
New 90" Cattle Feeder Green
New 90" Cattle Feeder Green

125
New 90" Cattle Feeder Green
New 90" Cattle Feeder Green

126
New 7 CY Telehandler Trash/Debris Container

127
New 2 YD Self Dumping Hopper With Fork Pockets

128
New 2 YD Self Dumping Hopper With Fork Pockets

129
New 2 YD Self Dumping Hopper With Fork Pockets

130
New 2 YD Self Dumping Hopper With Fork Pockets

131
Miller Syncrowave 250 Welder
Miller Syncrowave 250 Welder, arc welder with cooling system, in working condition, does not have a tank. 

132
Chicago Electric 90 Amp Flux Wire Welder
Chicago Electric 90 Amp Flux Wire Welder, in good working condition

135
Craftsman Air Compressor
Craftsman Air Compressor, 5 HP, 20 gallon tank, 125 max psi, 110 volt, in good condition. 

136
12' Bauer Fiberglass Step Ladder
12' Bauer Fiberglass Step Ladder, in good condition. 

137
Oxy Acetylene Torch Set
Oxy Acetylene Torch Set, complete set up, hoses appear to be cracking from age,

138
New Miller CP300 Welder
New Miller CP300 Welder, new unused condition, still in plastic wrapper.   200/230/460 Volt, 3-Phase. 

139
Miller CP300 Welder
Miller CP300 Welder, 3-phase, condition is unknown. 

140
Miller CP250TS with Wire
Miller CP250TS with Wire.   Welder is in good working condition and comes with barrel 1/3 full of welding wire. 

141
Miller DialArc 250 AC Welder
Miller DialArc 250 AC Welder, condition is unknown. 

142
Miller 60 Series Wire Feeder & Long Reach Extension
Miller 60 Series Wire Feeder & Long Reach Extension with digital readout. 

143
Aluminum Welding Spool Gun
Aluminum Welding Spool Gun with long hose and MIller Matic WC-IV weld control box.  Condition is unknown.

144
Predator 8750 Gas Generator
7000 Running watts, 8750 peak watts, A/C 120/240V, electric or recoil start, GFCI protected outlets, low hours, in very good condition

146
Craftsman Drill Press
Craftsman Drill Press mounted on metal shop table.  It has a 1/2 HP, 110V multi speed motor, comes mounted with a cross slide vice. 

147
Lincoln Welding Gun
Lincoln Welding Gun that can reach 25', it is for 400 amp, has a new liner installed and is in working condition. 

148
Tweco Welding Gun
Tweco Welding Gun for Miller Welders, 250 amp, comes with a new liner (not installed). 

149
Enco Belt Sander with Belts
Enco Belt Sander with approximately 20 extra belts, belt size is 4" X 36" with a 6" sanding disc.  

150
Heavy Duty Drill Press Vice
Heavy Duty Drill Press Vice that expands up to 9''

151
Accura Metal Band Saw
Accura Metal Band Saw that is 3 years old, 7" X 9", Operates on 220V single phase electric, it has a 60 degree mitering head, roll case is 7' on one side 5'6'' on the other, includes 10 new blades. 1) 5-7 variable pitch  8) 6-10 variable pitch 1) 8-12 variable pitch. 

152
Port-O-Brake DL860 Metal Brake
Port-O-Brake DL860 Metal Brake, 8' long,  In good condition. 

153
Xtreme Portable Dust Collector
110 Volt, Very good condition

154
Power Wheel Chair
Working condition, includes charger

155
Power Wheel Chair
Working condition, includes charger

156
Power Wheel Chair
Working condition, includes charger

157
Power Wheel Chair
Working condition, includes charger

158
New 40' Shipping Container
New 40' high cube multi-door shipping container, 4 side doors, end doors, 9'6'' high, 8' wide.  

159
New 9' Storage Container
New Storage Container, 9' long, 7'2'' wide, 8' high, double rear door, side man door, sliding window, fork pockets, many possible uses. 

160
New 9' Storage Container
New Storage Container, 9' long, 7'2'' wide, 8' high, double rear door, side man door, sliding window, fork pockets, many possible uses.

161
New 8' Storage Container
New Storage Container, 8' long, 6'6''' wide, 7'4''high, double rear door, side man door, sliding window, fork pockets, many possible uses.

162
New 8' Storage Container
New Storage Container, 8' long, 6'6''' wide, 7'4''high, double rear door, side man door, sliding window, fork pockets, many possible uses.

163
New Hot Water Pressure Washer
New Hot Water Pressure Washer, 4'000 PSI powered by a 420cc gas engine that has electric or recoil start (battery not included). Diesel powered hot water burner, LED work lights, fork pockets for easy transport, 

164
Magnum 4000 Hot Water Pressure Washer
Magnum 4000 Hot Water Pressure Washer on a steel skid for easy mounting in pickup truck or on a trailer.  It has a 15 hp gas engine and a diesel powered hot water burner.   It runs 3.5 GPM at 4'000 PSI.  It has electric and recoil start,  It is less that 1 year old and is in good working condition.   Water tank is approximately 200 Gallons.

167
New Steelman Work Bench Toolbox
New Steelman Work Bench Toolbox model 7ft-10D-2-01B, It has 10 drawers, 2 cabinets, 3 rail sliding drawers, anti slip mats, drawer locks, 110 lb rating per drawer. 

168
New Steelman Work Bench Toolbox
New Steelman Work Bench Toolbox model 7ft-10D-2-01B, It has 10 drawers, 2 cabinets, 3 rail sliding drawers, anti slip mats, drawer locks, 110 lb rating per drawer.

169
New Steelman Work Bench Toolbox
New Steelman Work Bench Toolbox model 7ft-20D-01B, It has 20 drawers, 3 rail sliding drawers, anti slip mats, drawer locks, 110 lb rating per drawer.

170
New Steelman Work Bench Toolbox
New Steelman Work Bench Toolbox model 7ft-20D-01B, It has 20 drawers, 3 rail sliding drawers, anti slip mats, drawer locks, 110 lb rating per drawer.

171
New Steelman Work Bench Toolbox
New Steelman Work Bench Toolbox model 7ft-18HD, It has 18 drawers, 2 cabinets, 3 rail sliding drawers, anti slip mats, drawer locks, 110 lb rating per drawer.

172
New Steelman Work Bench Toolbox
New Steelman Work Bench Toolbox model 7ft-18HD, It has 18 drawers, 2 cabinets, 3 rail sliding drawers, anti slip mats, drawer locks, 110 lb rating per drawer.

173
New Steelman Work Bench Toolbox
New Steelman Work Bench Toolbox model 7ft-18HD, It has 18 drawers, 2 cabinets, 3 rail sliding drawers, anti slip mats, drawer locks, 110 lb rating per drawer.

174
New Cast Iron Anvil
New Cast Iron Anvil, 200lb 

175
New 20'000 lb Electric Winch
New 20'000 lb Electric Winch, 12 volt, ready to install. 

176
New 14' Iron Gate with Deer Logo
New 14' bi-parting wrought iron gate with Deer artwork in the middle of the gate frame. 

177
New Dome Storage Shelter
New Dome Storage Shelter, 30' X 20' X 12', It comes with 6 arches, 12 anchor plates, the door size is 16' wide X 8' high, new in the box. Snow rating of 400lbs per square meter.

178
New Dome Storage Shelter
New Dome Storage Shelter, 30' X 20' X 12', It comes with 6 arches, 12 anchor plates, the door size is 16' wide X 8' high, new in the box.  Snow rating of 400lbs per square meter. 

179
New Self Dumping Hopper
New Self Dumping Hopper, 1 CY capacity, measures 3'6'' X 3'6'' at the top and has fork pockets on the bottom, 

180
New Self Dumping Hopper
New Self Dumping Hopper, 1 CY capacity, measures 3'6'' X 3'6'' at the top and has fork pockets on the bottom,

181
New Kohler 3-In-1 Generator, Compressor and Welder
New Kohler 3-In-1 Generator, Compressor and Welder, 9500W generator, 120 PSI dual tank air compressor and 200 amp max current regulator welder.   It is all powered by a Kohler 14 HP 429cc gas engine that has electric start, remote start and back up recoil start. It has never had gas or oil and is in brand new condition.  

182
New Kohler 3" Trash Pump
New Kohler 3" Water Pump that is powered by a 6.5 HP 196cc gas engine.  It is in brand new condition and never had gas or oil in it.  

183
40'000 BTU Ready Heater
40'000 BTU Ready Heater that runs and operates as it should and can be powered by either diesel or kerosene. 

184
Fork Extensions
Fork Extensions, 8' long, little use and in good condition. 

185
Motorcycle Lift
Motorcycle Lift in good condition with extended sides that are removable.   It also has a drive on ramp that comes off and foot pedal to operate the air, a wheel chock vice. It is wide enought to fit ATV's and some garden tractors.   1'000 lb lift capacity.  

186
Lift Gate
Lift Gate that is 7' wide, came off a box truck and is in working condition.   Installation manual is included. 

187
Pool Slide
Pool Slide 

188
Andersen Windows
Andersen Windows, various sizes of windows, most are vinyl.  

189
Roof Jacks
Roof Jacks, 2 buckets full. 

190
Pallet of New Tile Flooring
Pallet of New Tile Flooring, new in the boxes, 2 different colors.

191
4X4 Treated Posts (10)

192
Barn Metal 23' 16 Pieces A-Panel
Barn Metal 23' 16 Pieces A Panel, brown in color, 3' wide. new condition.

193
Pallet Racking (4) 48'' x 186" Uprights - (20) 8' Beams - (12) Wire Decks
Pallet Racking (4) 48'' x 186" Uprights - (20) 8' Beams - (12) Wire Decks

194
Pallet Racking Beams (14) Various Length
Pallet Racking Beams (14) Various Length

195
Pallet Racking (5) 48'' x 10' Uprights- (26) 8' Beams
Pallet Racking (5) 48'' x 10' Uprights- (26) 8' Beams

751
Deckover Equipment Trailer
Deckover Equipment Trailer that is 8' wide and19' long plus it has a 4' dovetail with folding ramps, It is a tri axle with each being rated at 7'000 lbs with newer G rated tires.   It has new electric brakes, new lights, pintle hitch and does sell with a title.   VIN: PH324161547

196
Pallet Racking Beams (4) 100''
Pallet Racking Beams (4) 100''

197
Pallet Racking (10) 42'' Uprights - (66) 8' Beams- (30) Wire Decks
Pallet Racking (10) 42'' Uprights - (66) 8' Beams- (30) Wire Decks

198
Pallet Racking Beams (14) 102''
Pallet Racking Beams (14) 102''

199
Pallet Racking Beams (8) 11' Beams
Pallet Racking Beams (8) 11' Beams

200
Pallet Racking Deck Pans (4) 48'' x 36''
Pallet Racking Deck Pans (4) 48'' x 36''

676

201
Pallet Racking Wire Decks (16) 48" x 56"
Pallet Racking Wire Decks (16) 48" x 56"

202
Pallet Racking Wire Decks (27) 48" x 58''
Pallet Racking Wire Decks (27) 48" x 58''

203
Pallet Racking Wire Decks (40) 48'' x 32''
Pallet Racking Wire Decks (40) 48'' x 32''

204
Pallet Racking (2) 48" 12'6'' Uprights (2) 48'' x 8' uprights (6) 12' beams (4) Wire Decks
Pallet Racking (2) 48" 12'6'' Uprights (2) 48'' x 8' uprights (6) 12' beams (4) Wire Decks

205
Pallet Racking Uprights (15) 48" x 18'
Pallet Racking Uprights (15) 48" x 18'

206
Pallet Racking (2) 38'' x 9'3'' Uprights - (2) 38'' x x10' uprights - (18) 106'' Arms Bolt Together
Pallet Racking (2) 38'' x 9'3'' Uprights - (2) 38'' x x10' uprights - (18) 106'' Arms Bolt Together

207
Pallet Racking (14) 38'' x 12' Uprights - (78) 106'' Beams - Bolt Together
Pallet Racking (14) 38'' x 12' Uprights - (78) 106'' Beams - Bolt Together

208
Pallet Racking Uprights (4) 42" x 12'
Pallet Racking Uprights (4) 42" x 12'

209
Pallet Racking (2) 38" x 98" Uprights - (4) 106" Beams - Bolt Together
Pallet Racking (2) 38" x 98" Uprights - (4) 106" Beams - Bolt Together

210
Pallet Racking (8) 36'' x 21' Teardrop Uprights
Pallet Racking (8) 36'' x 21' Teardrop Uprights

211
Pallet Racking (6) x 21' Teardrop Uprights
Pallet Racking (6) x 21' Teardrop Uprights

212
Pallet Racking (3) 42" x 12' Upright - (8) 8' Beams
Pallet Racking (3) 42" x 12' Upright - (8) 8' Beams

213
Pallet Racking (5) 48'' x 18' Uprights - (16) 99'' Beams - (16) 48'' x 46'' Wire Decks
Pallet Racking (5) 48'' x 18' Uprights - (16) 99'' Beams - (16) 48'' x 46'' Wire Decks

214
Pallet Racking (23) 106" Beams - Bolt Together
Pallet Racking (23) 106" Beams - Bolt Together

215
Pallet Racking (1) 38" x 10' Upright - (2) 38" x 103" Upright (12) 106" Beams Bolt Together
Pallet Racking (1) 38" x 10' Upright - (2) 38" x 103" Upright (12) 106" Beams Bolt Together

216
Pallet Racking (3) 38" x 12' Uprights - (16) 106" Beams - Bolt Together
Pallet Racking (3) 38" x 12' Uprights - (16) 106" Beams - Bolt Together

217
Pallet Racking (3) 38" x 98" Upright - (8) 106" Beams - Bolt Together
Pallet Racking (3) 38" x 98" Upright - (8) 106" Beams - Bolt Together

218
Pallet Racking (12) 48" x 10' Uprights - (18) 10' Beams - (17) 8' Beams
Pallet Racking (12) 48" x 10' Uprights - (18) 10' Beams - (17) 8' Beams

219
Wire Baskets (2)
Wire Baskets (2), 4' wide x 3'6'' deep x 32'' high. 

220
Wire Baskets (2)
Wire Baskets (2), 4' wide x 3'6'' deep x 32'' high.

221
Wire Baskets (2)
Wire Baskets (2), 4' wide x 3'6'' deep x 32'' high.

222
Wire Baskets (2)
Wire Baskets (2), 4' wide x 3'6'' deep x 32'' high.

223
Wire Baskets (2)
Wire Baskets (2), 4' wide x 3'6'' deep x 32'' high.

224
Wire Baskets (2)
Wire Baskets (2), 4' wide x 3'6'' deep x 32'' high.

225
Wire Baskets (2)
Wire Baskets (2), 4' wide x 3'6'' deep x 32'' high.

226
Wire Baskets (2)
Wire Baskets (2), 4' wide x 3'6'' deep x 32'' high.

227
Wire Baskets (2)
Wire Baskets (2), 4' wide x 3'6'' deep x 32'' high.

228
Wire Basket Shelving (8)
Wire Basket Shelving (8) 2' wide x 3' deep x 2' high.   Baskets are welded together in a stack. 

229
Wire Basket Shelving (8)
Wire Basket Shelving (8) 2' wide x 3' deep x 2' high. Baskets are welded together in a stack.

230
Wire Basket Shelving (4)
Wire Basket Shelving (4) 2' wide x 3' deep x 2' high. Baskets are welded together in a stack.

231
Wire Basket Shelving (6)
Wire Basket Shelving (6) 2' wide x 3' deep x 2' high. Baskets are welded together in a stack.

232
Cantilever Arm Rack Double Sided
Cantilever Arm Rack Double Sided, 7 arms per side, approximately 90" high.  

233
Cantilever Arm Rack Double Sided
Cantilever Arm Rack Double Sided, 7 arms per side, approximately 90" high.

234
Steel Sawhorse Set
Steel Sawhorse Set.  20'' high x 48'' wide. 

235
Steel Sawhorse Set
Steel Sawhorse Set.  18.5" high x 60'' wide. 

236
Steel Sawhorse Set
Steel Sawhorse Set. 18.5" high x 60'' wide. 

237
Steel Sawhorse Set
Steel Sawhorse Set.  (1) 24'' high x 48" wide.   (1) 25" high x 48" wide. 

238
Steel Sawhorse Set
Steel Sawhorse Set.  27" high x 60" wide 

239
LP Tank Approximately 500 Gallon
LP Tank Approximately 500 Gallon. It measures approximately 40" high, 36" diameter and 9' long. 

240
7 Pallets Of Lighting

241
5 Pallets of Lighting

242
1 Pallet of Lighting

243
Tool boxes and Organizers
Tool boxes and Organizers on a pallet, Organizers are full of assorted nuts,bolts and various hardware. 

301
Mcculloch Chain Saw
Mcculloch Chain Saw, 36" bar, unknown engine size, does not have gas but has good compression. 

244
Sidewall Barn Fan
Sidewall Barn Fan, 44'' diameter, 3-phase power. 

245
Sidewall Barn Fan
Sidewall Barn Fan, 44'' diameter, 3-phase power.

246
Sidewall Barn Fan
Sidewall Barn Fan, 44'' diameter, 3-phase power.

247
Diesel Pump
Diesel Pump with 8' of pipe, Gasboy Model, 1820

248
Fuel Tank
Fuel Tank,  60'' wide x 38" diameter.

249
Fuel Tank with Pump
Fuel Tank with Pump,   tank is 67" wide x 48" diameter, Gasboy pump included and in unknown opereating condition. 

250
Hog Roaster
Hog Roaster,   60" wide 

308
Stihl BR600 Backpack Leaf Blower
Stihl BR600 Backpack Leaf Blower, 2-stroke engine, in good running condition. 

300
Husqvarna 353 Chain Saw
Husqvarna 353 Chain Saw, 19" bar, 52cc engine, does not have gas but has good compression. 

302
Echo Chain Saw
Echo Chain Saw with case, 19" bar, no chain, does not have gas but has good compression. 

303
Mcculloch Chain Saw
Mcculloch Chain Saw, model MAC110, with case, 9" bar, does not have gas but has good compression.

304
Yard Machine String Trimmer
Yard Machine String Trimmer, 31cc 2-stroke engine, 17" cut, model Y28, does not have gas but has good compression. 

305
Boles String Trimmer
Boles String Trimmer, model BL100, 17' cut, 31cc 2-stroke engine, does not have gas but has good compression. 

306
Boles String Trimmer
Boles String Trimmer, model BL100, 17' cut, 31cc 2-stroke engine, does not have gas but has good compression.

307
HomeLite Prunner
HomeLite  Prunner, Shrub Shaper 17, 2-stroke engine, does not have gas but has good compression. 

309
Toro Mower/Mulcher
Toro Mower/Mulcher powered by a 6HP Briggs and Stratton engine, does not have gas but has good compression. 

202

310
Mower
Mower with a 3.5 HP Briggs and Stratton engine, 21'' deck, unknown running condition. 

311
Ranch King Riding Mower
Ranch King Riding Mower with a 14.5 HP Briggs and Stratton engine, 42'' mower deck, 7-speed forward and reverse transmission, 5-position deck height, does not have a battery or gas.  

312
Lawn Roller 24"
Lawn Roller 24'',  push by hand or hook to lawn tractor, needs plug, in good condition. 

313
Lawn Cart
Lawn Cart, self dumping, hooks to draw bar, 32'' wide X 40'' long, no tailgate, good condition. 

314
Lawn Cart
Lawn Cart, self dumping, hooks to draw bar, 32'' wide X 40'' long, good condition.

315
Wood Chipper
Wood Chipper with a Briggs and Stratton 5HP engine, does not have gas but has good compression.  

316
Huskee 22 Ton Log Splitter
Huskee 22 Ton Log Splitter with a 190cc Briggs and Stratton engine, pulls with a 2'' ball, does not have gas but has excellent compression. 

317
Log Splitter
Log Splitter with a 5.5 HP Briggs and Stratton engine, pulls with a 2'' ball, does not have gas but has excellent compression. 

318
Advance Retriever 5800 Industrial Sweeper
Advance Retriever 5800 Industrial Sweeper with only 8 Hours!  It has a Nissan LP powered 4-cylinder engine and is in excellent running condition.   It is all hydraulically operated and has a weight of 2'900 lbs.   Serial Number: 1077349

319
1981 Honda Goldwing Interstate GL1100I
1981 Honda Goldwing Interstate GL1100I with 24'838 miles, it has a 4-cylinder 1100cc engine with a 5-speed manual transmission. It does have the side boxes and trunk and includes a cover.  It does not currently run as it has been parked for several years.  Sells with Title- HOWEVER, with the name on the title and the paperwork that is included, it will be difficult to get it titled in your name. You are buying it with the paperwork as is.

320
Dirt Bike
Dirt Bike with a motor and transmission from a Chinese 4-wheeler.  It does start and run.  Sells with a bill of sale only.

321
Motorcycle Dolly
Motorcycle Dolly with a weight capacity of 1'250 lbs and is 8' long with a kickstand tray and is on castors.  Roll motorcycle onto stand to easily move it around garage or storage facility. 

322
Murray Go-Cart
Murray Go-Cart powered by a 318cc Tecumseh engine, has a Comet Clutch and is in running condition, brakes do need attention. 

323
Go-Cart
Go-Cart is in running condition and is powered by a 212cc Predator engine, brakes need attention.

324
Go-Cart
Go-Cart that runs and is powered by a 79cc Predator engine, brakes need attention.  

325
Case 444 Garden Tractor
Case 444 Garden Tractor powered by a Kohler K321 engine with a hydrostatic transmission that has hi-low range. Tractor has been repainted, comes with a 44" mower deck, 42" rear blade, hours are unknown, in good running condition. 

326
Carbide 150cc Go-Cart
Carbide 150cc Go-Cart, It has full suspension 2 bucket seats and is electric start.   It was in running when it was parked but not currently running. 

327
Helix 150cc Go-Cart
Helix 150cc Go-Cart, It has full suspension, bench seat for 2 people and is electric start. It was in running when it was parked but not currently running.

328
Tiron 150cc Go-cart
Tiron 150cc Go-Cart, It has full suspension, bench seat for 2 people and is electric start. It was in running when it was parked but not currently running.

329
Wizard Walk Behind Tractor
Wizard Walk Behind Tractor in unknown running condition.   It currently has a disc on the back and is gas powered.   

330
Predator Engine
Predator Engine,   It is a 420cc gas engine that has electric start and recoil start.   It does not currently have a battery and is mounted to a steel frame.   Running condition is unknown. 

331
John Deere F725 Mower
John Deere F725 Mower with 2'306 hours, It has a Kawasaki F590 liquid cooled v-twin engine, hydrostatic transmission, 54" mower deck and power steering.   It has a recent tune and service and everything works as it should.   PIN: M0F725X041354

332
Simplicity Riding Mower
Simplicity Riding Mower with a Briggs and Stratton Vanguard 16 HP V-Twin engine and hydrostatic transmission. It has a 44'' mowing deck that has adjustable height.  It has a recent tune and service and runs and operates as it should.   

333
Stihl FS55R Weed Trimmer
Stihl FS55R Weed Trimmer, starts, runs and operates. 

334
Stihl SH86C Leaf Blower
Stihl SH86C Leaf Blower, did not start, recoil would not pull.   

335
Stihl BG56C Leaf Blower
Stihl BG86 Leaf Blower, Starts and Runs

336
Stihl BG86 Leaf Blower
Stihl BG86 Leaf Blower, Starts and Runs

337
Poulan Pro Leaf Blower
Poulan Pro Leaf Blower, 25cc 2-stroke, 200 mph, did not start, has good compression.  

338
Stihl SR450 Back Back Sprayer / Leaf Blower
Stihl SR450 Back Back Sprayer / Leaf Blower, runs and operates. 

339
Stihl KM85R Combi Unit
Stihl KM85R Combi Unit, made to be attached to several different attachments, did not start, no gas, good compression 

340
Husqvarna 455 Rancher Chain Saw
Husqvarna 455 Rancher Chain Saw, runs and operates. 

341
Stihl TS670 Concrete Saw
Stihl TS670 Concrete Saw, runs and operates. 

342
Brouwer Sod Cutter
Brouwer Sod Cutter, Honda 5.5 HP GX160 Engine, runs and operates.

343
Maximum Lawn Edger, Honda GX120 engine, did not start, has good compression.  

344
Simplicity Riding Mower
Simplicity Riding Mower, It has a 14.5 hp 500cc engine and a hydrostatic transmission, 6-position deck height, bagger system is included.  It will need a starter before to long. 

345
John Deere D130 Riding Mower (No Deck)
John Deere D130 Riding Mower (No Deck),  It has a 22 HP 656cc Briggs and Stratton engine and a hydrostatic transmission, It has 482 hours, cruise control, runs and operates as it should. 

346
Wen 4750W Dual Fuel Generator
Wen 4750W Dual Fuel Generator that can run on gas or LP.   It has under 10 hours, Electric or recoil start, 246cc engine, with pull handle and on wheels for easy movement.    Almost New Condition 

347
Troy Built Riding Lawn Mower
Troy Built Riding Lawn Mower, It has a 17hp 597cc engine and a hydrostatic transmission, 5-position deck height, wash out 42" mowing deck, under 25 hours. Very good condition.  Serial Number: 4505032373

348
Honda EU2000i Generator Inverter
Honda EU2000i Generator Inverter,   just recently serviced and runs and operates as it should, very quiet.   

349
2010 Yamaha Grizzly 350 ATV, VIN # 5Y4AH28Y8AA008370
Year: 2010
Make: Yamaha
Model: Grizzly 350
Vehicle Type: ATV
Mileage:
Plate:
Body Type:
Trim Level:
Drive Line: 2WD
Engine Type: SOHC; A/C; 4-Stroke
Fuel Type: Gasoline
Horsepower:
Transmission: Automatic 
VIN #: 5Y4AH28Y8AA008370

Features and Notes:  350cc automatic 2-wheel drive ATV.  It does not currently start as it has sat for a year and it is assumed to need a carb clean but does crank over very well.   It also does include a hitch, owners manual and factory tool kit.   This sells with a bill of sale only and also has had a police VIN inspection.

350
Go-Cart
Go-Cart with a 5.5 hp Honda GX160 engine, in running condition. 

351
Go-Cart (No Engine)
Go-Cart (No Engine)  ready to have an engine bolted on.

352
Go-Cart Body
Go-Cart Body, ready to be mounted to cart or keep for a spare. 

353
7200W Generator
7200W Generator, Suburu powered, 296 hours, runs and operates

354
7200W Generator
7200W Generator, Suburu powered, 98 hours, runs and operates and has auto idle. 

355
John Deere 265 Riding Mower
John Deere 265 Riding Mower,   It has a Kawasaki FC540 engime, Hydrostatic transmission, 54" mowing deck, hours are unknown, new battery, works as it should. 

356
Hydro Seeder
Hydro Seeder with 500 gallon tank,  It needs and engine and it has the pump components. the trailer is in decent shape and uses a pintle stlye hitch.  Bill of sale only 

357
(2) 300 Gallon Dual Wall Insulated Tanks

358
Industrial Water Hose and Reel
Industrial Water Hose and Reel, Approximately 700' for traveling sprinkler. 

359
1993 Yamaha Blaster YFS200 ATV, VIN # JY43JMA0XPA146263
Year: 1993
Make: Yamaha Blaster
Model: YFS200
Vehicle Type: ATV
Mileage:
Plate:
Body Type:
Trim Level:
Drive Line:
Engine Type: 1cyl, 195 cc; 2-Stroke
Fuel Type: Gasoline
Horsepower:
Transmission: 6-Speed Manual
VIN #: JY43JMA0XPA146263

Features and Notes: 200cc 2-stroke oil injected air cooled engine, it has new tires.   It has been parked for a few years and curently does not start.

360
Kees Walk Behind Mower
Kees Walk Behind Mower,   It has a 48'' mowing deck, Kawasaki FC420V Engine and is self propelled,   unknown running condition. 

361
Lawn Edger
Lawn Edger with a 3.75 hp Briggs and Stratton engine,  It was in running condition when it was put away last year.

362
Craftsman LTS2000 Riding Lawn Mower
Craftsman LTS2000 Riding Lawn Mower, 20 HP Briggs and Stratton Engine, 42'' Deck, with bagger system, hydrostatic drive transmission, 6-position deck height, runs but needs new battery.

395
Heavy Equipment Key Set 24 Keys
Heavy Equipment Key Set 24 Keys.   Kit includes keys for John Deere, Toyota, Yanmar, Hyster, CAT, Lull, Volvo, Case, Skytrack, Bobcat, Hybrid, Massey Ferguson, Snorkel, JLG, Upright, New Holland, Skyjack, Genie, Snorkel and many more.  

396
Heavy Equipment Key Set 24 Keys
Heavy Equipment Key Set 24 Keys. Kit includes keys for John Deere, Toyota, Yanmar, Hyster, CAT, Lull, Volvo, Case, Skytrack, Bobcat, Hybrid, Massey Ferguson, Snorkel, JLG, Upright, New Holland, Skyjack, Genie, Snorkel and many more.

397
Heavy Equipment Key Set 24 Keys
Heavy Equipment Key Set 24 Keys. Kit includes keys for John Deere, Toyota, Yanmar, Hyster, CAT, Lull, Volvo, Case, Skytrack, Bobcat, Hybrid, Massey Ferguson, Snorkel, JLG, Upright, New Holland, Skyjack, Genie, Snorkel and many more.

398
Heavy Equipment Key Set 24 Keys
Heavy Equipment Key Set 24 Keys. Kit includes keys for John Deere, Toyota, Yanmar, Hyster, CAT, Lull, Volvo, Case, Skytrack, Bobcat, Hybrid, Massey Ferguson, Snorkel, JLG, Upright, New Holland, Skyjack, Genie, Snorkel and many more.

399
Heavy Equipment Key Set 24 Keys
Heavy Equipment Key Set 24 Keys. Kit includes keys for John Deere, Toyota, Yanmar, Hyster, CAT, Lull, Volvo, Case, Skytrack, Bobcat, Hybrid, Massey Ferguson, Snorkel, JLG, Upright, New Holland, Skyjack, Genie, Snorkel and many more.

400
Lister Petter Diesel Engine
Lister Petter Diesel Engine, 4-cylinder engine with radiator, good working condition, on skid.  

401
Go Fast Grade Resaw
Go Fast Grade Resaw with complete run around system, 12 or 24 volt controls, 14'' capacity, all hydraulic set up.

402
Morbark Chip-Pac
Morbark Chip-Pac, 48'', 3-knife, includes chipper, shaker and cyclone, in fair condition. 

403
Dust Blower
Dust Blower, 48" diameter, no power.  In fair condition.  

404
Belt Conveyor
Belt Conveyor that is 30'' wide, 56' long, hydraulic drive, does not include the belt.  

405
Roll Case
Roll Case that is 24' wide and 28' long and comes in 2 sections, rollers are 81/2'' diameter, no power. 

406
Hydraulic Tank Unit
Hydraulic Tank Unit that is 32'' x 60'' x 46" high,  includes 2 pumps, 1 pressure comp and 1 vain type.  

407
Line Shaft
Line Shaft that is 2 7/16" diameter X 7' long and includes bearings and pullys. 

408
Chamfer
Chamfer with air and hydraulic drive and is in good condition. 

409
John Deere Power Unit
John Deere Power Unit,  It is a 4-cylinder and includes the clutch, approximately 80-90 HP, hours are unknown, 

410
Woodmizer LT40 Sawmill
Woodmizer LT40 Sawmill, It is powered by a Honda GX630 engine, it is all manual, hours are unknown, runs and operates as it should, it will have a new battery before auction, includes several new bands and an attachment for shingles.   Serial Number 09881377AK

411
Morbark Chipper
Morbark Chipper that is portable and powered by a Wisconsin V-twin gas engine that has electric start, It is a 3-knife and in good working condition.   It does need a new fuel line 

412
2006 Woodmizer LT70 Sawmill
2006 Woodmizer LT70 Sawmill, Fully portable and has electric drive, full hydraulics, laser light, debarker, 1 1/2 band, chain log turner, no controls or set works. In overall good condition. approximately 1'000 hours.     VIN: 456D724186NCA7446

413
CAT Genset with 400KW Generator
CAT Genset with 400KW Generator, It has a CAT 3406 Turbo diesel engine that has less than 200 hours on rebuild.   It does have new pistons and cylinder sleeves, runs and operates as it should, needs new coolant overflow tank and red button needs held in while starting.   

414
2001 Woodmizer LT40 Sawmill
2001 Woodmizer LT40 Sawmill, It has a Kohler Command 25 hp V-twin engine, It is all hydraulic, has a debarker, an upgraded dog system, board return, new battery, new alternator, new tires, fully portable, in good condition.    VIN: 456B424141NMJ4555

415
Roll Case
Roll Case with 18" wide rollers, 12' long, with pop up transfer chains and built in cant turner, no drive

416
Roll Case
Roll Case, 24" wide x 16' long, no drive. 

417
Belt Conveyor
Belt Conveyor, 20'' wide x 58' long, 4'' sides, hydraulic drive, belt included. 

418
Cooks Bandmill
Cooks AC36 Bandmill, mill is disassembled and appears to be complete, no power on head unit, track is fully hydraulic with 24" log capacity with controls, air set works

419
Cummins Power Unit
Cummins Power Unit.  It is a factory remanufactured 5.9 liter 160 hp Cummins Engine with a complete new clutch and Murphy controls. 

421
Conveyor
Conveyor, 24" long, electric drive, 

422
Bayle Grain Bin Drying Fan with 75HP Motor
Bayle Grain Bin Drying Fan with 75HP Motor, 1'400 bushels per hour, built in 1995, Model AFC445, Serial Number 100123-65.  It has a Baldor 75 hp 3-phase electric motor in good working conditon.

500
2014 Bobcat T870 Skid Loader
2014 Bobcat T870 Skid Loader with only 3'209 hours.   It has new tracks with under 200 hours on them.   It has a Tier 4, 4-cylinder turbo charged Kubota diesel engine rated at 100 horsepower, 2-speed drive,  a lift capacity of 5'200 lbs.  Features include a full cab with heat and air conditioning, auxiliary hydraulics, air suspension seat, ISO or H pattern hand controls, radio, power attach, code start, unit will sell with a 83" bucket.   Product ID Number: A3PG13113

501
Case 1818 Skid Loader
Case 1818 Skid Loader powered by a 2 cylinder Onan gas engine that is rated at 18 HP.   It has a lift capacity of 1'100 lbs, and operating weight of 2'593 lbs, comes with a 60" bucket, shows 2'648 hours, hand controls, tires are at about 10%, just recently serviced and runs as it should.    Fuel petcock was added, must be shut off and let unit turn off or engine will fill with gas.    PIN: JAF007-836

502
John Deere CT322 Skid Loader
John Deere CT322 Skid Loader with 4'268 hours.  It is powered by a 4-cylinder turbo charged  2240 engine that makes 66 HP.  It has a lift capacity of 3'200 lbs and comes with a 72'' bucket.   It has good tracks, power attach, auxiliary hydraulics, hand and foot controls.   It is just out of the shop with a fresh service including new injectors, new fuel pump.  Radiator and drive motors are new 1 year ago.  Product ID Number: T0322TA136307

503
2019 CAT 259D3 Skid Loader
2019 CAT 259D3 Skid Loader with 990 hours.   It is powered by a CAT C3.3B turbo diesel engine that makes 74 horsepower, it is a 2-speed, it has a lift capacity of 2'870 lbs, H2 performance package with auxiliary hydraulics, electronic self level, full cab with heat and cold air conditioning, suspension seat, stereo, hand controls with foot throttle, good tracks, everything works as it should, well cared for very clean machine and it has only had 1 owner.   Product ID Number: CAT0259DJCW902194

Follow this link for a full spec sheet 
https://s7d2.scene7.com/is/content/Caterpillar/CM20190726-932c7-3cd82  

504
2013 CAT 272D Skid Loader
2013 CAT 272D Skid Loader with 3'795 hours, It has a CAT C3.8 Turbo charged 2-speed diesel engine that is rated at 98 HP, auxiliary hydraulics, power attach, full cab with heat and air conditioning, hand controls, foot throttle, suspension seat, 80'' bucket, lift capacity of 3'200 lbs, almost new tires, operating weight of 18'527 lbs.   This is the biggest wheel machine CAT made at the time of manufacture.   Product ID Number CAT0272DTGSL00281

505
Toro Dingo TX-420 Walk Behind Skid Loader
Toro Dingo TX-420 Walk Behind Skid Loader, It is powered by a Kohler V-twin engine and has auxiliary hydraulics, 41" loader bucket, 500 lb lift capacity, quick attach. Rubber tracks will need replaced soon.    Serial Number 280000159

506
2002 Bobcat T200 Skid Loader
2002 Bobcat T200 Skid Loader with 4'667 hours,   It has a 4-cylinder Turbo diesel engine rated at 73 HP, It has a full cab with Heat and A/C ( but doesn't blow cold), auxiliary hydraulics, power attach, hand and foot controls, 2'000 lb lift capacity, it was serviced 100 hours ago, does not include attachment, tracks have 50% tread but are cracked.   Product ID Number: 518915808

540
Genie Z-45/22 Boom Lift
Genie Z-45/22 Boom Lift with 5'448 hours.  It has a 4-cylinder Ford engine that runs on either gas or propane and is 4-wheel drive. It has a maximum platform height of 45' and a maximum reach of 22'.  The platform can hold up to 2 people and has a lift capacity of 500 lbs. It was  built in  1997 everything works and operates as it should and is in good working condition.  The unladen weight is 14'400 lbs.  Serial Number: Z-45-005592

541
2013 Haulotte 45XA Man Lift
2013 Haulotte 45XA Man Lift from a rental fleet in good working condition amd has 9'913 hours.  It has a maximum height of 45' a maximum reach of 27' a lift capacity of 500 lbs or 2 people and weighs 4'900 lbs.   It is powered by a Kawasaki V-twin engine, it is 2-wheel drive, 2-wheel steering, 4 outriggers that have auto leveling and cylinders were recently repacked.  Everything works and is in good condition.  The drive is powered by the gas engine and the lift is powered the electrical system that has a built in charger.  

542
2007 JLG 600S Boom Lift
2007 JLG 600S  Boom Lift that is powered by a dual fuel Ford engine that can run or gas or LP.  It has 4'561 hours, 4-wheel drive, foam filled tires, a platform maximum height of 60', maximum horizontal reach of 49', platform weight capacity of 1'000 lbs, total weight of 21'461 lbs, good paint and decals, in excellent working condition, 
Serial Number: 0300114123

543
2005 JLG E450AJ

SPECIFICATIONS

General

Year
2005
Manufacturer
JLG
Model
E450AJ
Condition
Used
Hours
1457
Stock Number
6576R
Powertrain
Drive
2 WD

560
JLG Scissor Lift 1932E2
JLG Scissor Lift 1932E2 with only 325 hours.  It has a maximum height of 19' and is 32" wide.  It has an extendable platform, 500 lb or 2 person capacity, fork pockets, works and operates as it should.  Serial Number: 200108916

561
MEC Scissor Lift
MEC Scissor Lift model 2548HT, It has a platform height of 25' and a width of 48" and is 8'6'' long with an extendable platform,  It has new batteries, a new charger and fork pockets for easy loading, hours are unknown.  

562
JLG Scissor Lift 2646E2
JLG Scissor Lift 2646E2, has a platform height of 26' and is 46'' wide.  It has an extendable platform that can hold 750 lbs, It has also has new batteries, a new charger and fork pockets for easy loading.   Serial Number 0200087766

563
JLG 1932E2 Scissor Lift
JLG 1932E2 Scissor Lift, It does not currently have batteries and running condition is unknown,    19' Lift height and 32" wide, 500 lb lift capacity, extendable platform, fork pockets for easy loading, 

580
Toyota Forklift
Toyota Forklift with a 7'400 lb lift capacity.   It has a 3 stage mast, side shift, 48" forks, 2-speed forward drive, lp powered, fresh paint, decent tires and runs good.   Tank is not included and the hours are unknown as gauges do not work.  Model: FGC33.  Serial Number: 12547. 

581
Allis-Chalmers Forklift
Allis-Chalmers Forklift with only 8'583 hours and a 12'000 lb lift capacity.  It has 60" forks, dual front tires, 2-stage mast, side shift, weight of 16'248 lbs.   Everything works on this machine, it was a former rental, does have a small oil leak by side shift, lp tank not included, Serial # M1TF83

582
Nissan Forklift
Nissan Forklift with 9'249 hours and a lift capacity of 7'100 lbs.   It has a 3-stage mast, 48" forks, side shift, good tires and weighs 11'800 lbs.   Lp tank is not included.  Serial Number: D238599

583
Big Joe EZ-30 Electric Pallet Jack
Big Joe EZ-30 Electric Pallet Jack. It has a lift capacity of 3'000 lbs, New batteries, built it charger, 48" forks, good working condition, Serial number: E2021760

584
Big Joe EZ-30 Electric Pallet Jack
Big Joe EZ-30 Electric Pallet Jack. It has a lift capacity of 3'000 lbs, New batteries, built it charger, 48" forks, good working condition, Serial number: E2021426

585
Toyota Electric Pallet Jack
Toyota Electric Pallet Jack with a 4'000 lift capacity and has 10'215 hours.   It has a total weight of 800 lbs,  has good batteries and is good working condition.   Model 6HBW20

586
Clark Forklift
Clark Forklift that is LP powered and has a 3-stage mast with side shift and a lift capacity of 2'900 lbs.  It has6'668 hours,  48" forks, new battery, fresh service and is in good running condition.   Serial Number: G127-0275-7645K0F  Model Number: GCS17S

587
Mitsubishi Fork Lift
MitsubishiIt Fork Lift that has 9'012 hours and is LP powered.   It has a lift capacity of 3'000 lbs, 3-stage mast, side shift, 42'' forks, new battery, fresh service and is in good running condition.  Serial Number: AF81B-51026  Model Number : AF81B-51026

588
Crown Electric Pallet Jack
Crown Electric Pallet Jack, in working condition with 46'' forks and has a lift capacity of 4'500 lbs.   Model: WP3035-45.   Serial Number 7A257353

589
Crown Electric Pallet Jack
Crown Electric Pallet Jack, 4'500 lbs lift capacity, in working condition, needs new batteries.  Model WP-2335-45

590
Crown Electric Pallet Jack
Crown Electric Pallet Jack, 4'500 lbs lift capacity, in working condition, needs new batteries. Model WP-2335-45

591
Crown Electric Pallet Jack
Crown Electric Pallet Jack, 4'500 lbs lift capacity, in working condition, needs new batteries. Model WP-2335-45

592
Crown Electric Pallet Jack
Crown Electric Pallet Jack, 4'500 lbs lift capacity, in working condition but needs some tlc,  needs new batteries. Model WP2035-45

600
CAT 910 Wheel Loader
CAT 910 Wheel Loader with 8'067 hours, It has a 9'10'' bucket, 3 speed transmission and is powered by CAT 4 cylinder 3204 diesel engine that is rated at 65 horsepower and has a weight of 14'200 lbs. The tires are at about 10%.  Serial Number: 80U0430

601
1998 CAT 924F Wheel Loader
1998 CAT 924F Wheel Loader with 23'886 hours.  It is powered by a CAT 3114 turbo charged diesel engine that is rated at 111 HP.   The engine is backed by a Powershift Transmission with 4 forward and 3 reverse gears. It has a weight of 20'000 lbs. It has a full cab with heat and a/c and a suspension seat.  It sells with 44'' forks.  The machine works and operates as it should.  The tires are rated at 25-50%.  Product ID Number : 5NN00223

602
Loader Bucket
Loader Bucket that is 94" wide, has a good edge, known to fit a CAT 924F and possibly other models also.  

603
2 Wheel Loader Tires
2 Wheel Loader Tires  size 17.5R 25 both have low tread but are still in useable condition.  

604
2007 Volvo L110F Wheel Loader
2007 Volvo L110F Wheel Loader. It is powered by a 6 cylinder 2244  turbo charged and intercooled diesel engine rated at 228 horsepower that is backed by an automatic powershift transmission that has 4 forward and 4 reverse gears.  It has only 4'787 hours, a complete cab with heat and air conditioning, a suspension seat, adjustable steering, quick attach and much more.   This loader has been very well professionally maintained and service records are available.  Bucket and forks sold separately.    Product ID Number: L110FV61618

605
Wheel Loader Bucket
Wheel Loader Bucket, Volvo model 80575  it is 9'6'' wide and 5' high with quick attach and is in good condition. 

606
Wheel Loader Forks
Wheel Loader Forks that are 57'' long and have adjustable width.  They are in good condition. 

607
Hyster C612 Smooth Drum Vibratory Roller
Hyster Smooth Drum Vibratory Roller that is powered by a Detroit Diesel engine.   The drum is 6' wide and is in good condition, the hours are unknown but believed to be 3'500-4'000 and a new meter was put on 28 hours ago.   It runs and operates as it should. The tire does have a slow leak.   Serial Number 1630

610
1995 Case 850G Longtrack Dozer
1995 Case 850G Longtrack Dozer with 6'846 hours, It runs and operates and has 18'' wide tracks, 8 1/2' blade.  It is powered by a Case 6T-590 6-cylinder engine that nets about 120 horsepower and has 4 forward and 4 reverse gears and seems to be  in good working condition.  Product ID Number: JJG0217824

611
Fiat-Allis FD9 Dozer
Fiat Allis FD9 Dozer with 4'363 hours and is powered by a turbo charged diesel engine rated at 90 HP.  It has a 9' 4-way blade, decent undercarriage, Everything works and is in good condition.   

612
1970 Case 310G Crawler Dozer
1970 Case 310G Crawler Dozer, it has a 38 hp 4-cylinder gas engine, 4 way  blade that is 6 1/2' wide, 4 speed forward gears and 1 reverse, newer sprockets and rollers, grease tighteners, 25 hours on engine rebuild, no leaks, works and operates as it should.   Serial Number: 3039711   ***update NEW Decals***

620
1997 Case 9020B Excavator
1997 Case 9020B Excavator with 11'398 hours.  It has 2' wide tracks, 42" 5-tooth bucket and a hydraulic thumb.  The front glass is missing the other glass is discolored and it does have some leaks.   It has a digging depth of approximately 20' and a reach across the ground of about 30' and weighs 35'275 pounds.   It has a 4 cylinder 2239 turbo charged diesel engine that puts out 106 horsepower, It is in good running condition. Product ID Number: DAC0201476

621
CAT 307 SSR Excavator
CAT 307 SSR Excavator in good running condition.   It has rubber tracks, articulating stick, engine rated at 40 HP, weight if 16'300, reach across the ground is 24' and dig depth is 15'.  It has a 7'6" back fill blade, 33" 7-tooth bucket with smooth edge attachment, mechanical thumb, It is missing the sunroof and door window.   Good operating machine.   

622
Kubota KX027 Mini-Excavator
Kubota KX027 Mini-Excavator with 3'489 hours.  It has a 20" bucket with a hydraulic thumb, 58" backfill blade, 12" wide steel tracks. It is powered by a 4-cylinder Kubota diesel engine and is in working condition however the backfill blade does not go up.   Serial Number: 10036.  Engine Number 218455

623
Insley Crane
Insley Crane with a 35' boom,   It ran and operated when it was parked 8 years ago.   It sells offsite and can be viewed at 16483 CR 8  Bristol, IN 46507.  Buyer is responsible for loading and removal.   

624
2008 CAT 303C CR Mini Excavator
2008 CAT 303C CR Mini Excavator with around 3'000 hours.   It is powered by a CAT 3 cylinder diesel engine rated at 30 HP and is a 2-speed.   It has a 24" 5-tooth bucket with a hydraulic thumb, mechanical quick coupler, 5' 4-way back fill blade, reach is 16', max dig depth is 9'6'', rubber tracks are at about 50%, pins a bit sloppy, runs and operates and tracks well, hour meter is not correct.   Serial Number: BXT02888

625
Vermeer Trencher V2050
Vermeer Trencher V2050.  It has a 52'' arm,  a Kohler Command 20 hp engine, hour meter shows 708 hours, runs and operates. 

630
John Deere 440D Skidder
John Deere 440D Skidder with only 151 hour on rebuilt motor and new transmission seals, bearing, clutch and flywheel as of 4-27-2021.  It is powered by a 90 HP 4-cylinder turbo charged John Deere 4-276T engine. It is 4 wheel drive (1 drive wheel doesnt engage) has newer tires rated at approximately 90%. It has a 7 foot blade, 100' of new cable on winch with 3 choker cables, just had a tune and service and comes with a full set of books and manuals,   PIN: DW440DA501857

631
Vermeer BC600XL Chipper
Vermeer BC60XL Chipper with a Kohler Command Pro 27 HP V-Twin electric start Engine with 732 hours. It is 6" rated and has auto feed, This machine is outfitted with a hydraulic drive for easy movement, pulls with 2" ball and has lights,   VIN: 1VR2091HB1003980

631A
Vermeer BC1500 Chipper
Vermeer BC1500 Chipper in good working condition, It has a John Deere 125 hp diesel engine, approximately 7'600 hours, recently serviced, pintle hitch, good tires, works and operates as it should. 

632
Timberjack 225 Skidder
Timberjack 225 Skidder that is powered by a 353 Detroit Diesel engine and has a 4-speed forward and reverse transmission with Hi-low gear and it is a 4-wheel drive.   It also has an Eaton 20 ton winch that has 4 speed forward and reverse with Hi-low and comes with 3 chokers and has the room for 4 chokers. The winch cylinders hve been recently rebuilt and has a new kit in it. The tires hve good tread depth but do have some chunks out of some of the lugs and they are foam filled. Everything works as it should and it does not have any leaks and the hours are unknown.   Serial Number: 792980

650
2007 John Deere 5325 tractor with 542 Loader
2007 John Deere 5325 with a 542 loader bucket and only has 590 hours! It is powered by a 3.1 liter 5-cylinder 67 horsepower turbo diesel engine and backed by a 12-speed transmission with power reverse.  It is a 4-wheel drive, comes with a 6' quick attach loader bucket, 55 horsepower PTO, 3 point hitch, remote hydraulics, excellent paint, always stored inside, tires rated over 80%, Very nice clean machine.   Serial Number : LV5325R334428

651
2006 Kubota BX1850
2006 Kubota BX1850 with only 7 hours.   It has a 3 cylinder Kubota diesel engine rated at 18 HP, a hydrostatic transmission, hydrostatic power steering, 4-wheel drive, a 54" mower deck, 3-point hitch and PTO.   Several attachments are made for this tractor including front loaders.   Model BX1850T54   Serial Number: 53974

652
Fordson Major Diesel Tractor
Fordson Major Diesel Tractor, It is powered by a Ford 3.6 liter 4-cylinder diesel engine and is backed by a 6-speed manual transmission. It is a 2 wheel drive, and has a 540 PTO, 3-point hitch, draw bar, rear hydraulics, original hours are unknown.  It does start and run.  

653
1955 Farmall 400 Row Crop Tractor
1955 Farmall 400 Row Crop Tractor,  It is powered bt a 4.3 liter gas engine that is rated at 50 horse power and backed by a manual transmission with 10 forward gears and 2 reverse gears.  It is a 2wd and has a 540 PTO, Drawbar , 3-point hitch, rear hydraulics.  It runs and operates good and has fresh paint.   Serial Number: 14698

654
1997 Case 4230 Tractor
1997 Case 4230 Tractor that is rated at 80 horsepower.  It is powered by a Case 4.4 liter diesel engine and backed by a manual synchromesh transmission with 8 forward gears and 4 reverse.  It has 3'070 hours, full cab with heat and a/c, remote hydraulics, drawbar,  3-point hitch, 540 and 1000 PTO, rear tires are worn, one owner machine, Three point is currently stuck in place. Had worked but seller hasn’t used it in multiple years.
Slight fuel leak.
Product ID Number: 4230RXLJJE0916598

655
Knight Pro Twin Slinger Manure Spreader
Knight Pro Twin Slinger Manure Spreader with side discharge, 16' long, augers are wore, in working condition, stored inside, Model 8024

656
1941 Farmall H Tractor
1941 Farmall H Tractor with a 4 cylinder gas engine and a 5-speed manual transmission, 540 PTO, drawbar, 6 volt electrical system, runs and drives.   

700
1995 Mack RB690S Dump Truck, VIN # 1M2AM20C2SM002600
Year: 1995
Make: Mack
Model: RB690S
Vehicle Type: Truck
Mileage: 332'005
Plate:
Body Type:
Trim Level:
Drive Line:
Engine Type: L6, 12.0L (728 CID)
Fuel Type: Diesel
Horsepower: 300HP (224kW)
Transmission: Manual
VIN #: 1M2AM20C2SM002600

Features and Notes:  1995 Mack RB690S Dump Truck, It is a Tri-Axle and has 19'428 hours, 7-speed transmission, runs and drives, 8' X 16' dump bed, tires are at or below 10%, the speedometer and fuel gauge are not working correctly. 

701
1995 Mack RB690S Dump Truck, VIN # 1M2AM20C9SM002593
Year: 1995
Make: Mack
Model: RB690S
Vehicle Type: Truck
Mileage:257'283
Plate:
Body Type:
Trim Level:
Drive Line:
Engine Type: L6, 12.0L (728 CID)
Fuel Type: Diesel
Horsepower: 300HP (224kW)
Transmission: Manual
VIN #: 1M2AM20C9SM002593

Features and Notes: 1995 Mack RB690S Dump Truck, It is a Tri-Axle and has 18'918 hours, 7-speed transmission, runs and drives, 8' X 16' dump bed, tires are at or below 10% and the tailgate is off, the speedometer and fuel gauge are not working correctly.

702
1995 Mack RB690S Dump Truck, VIN # 1M2AM20C7SM002592
Year: 1995
Make: Mack
Model: RB690S
Vehicle Type: Truck
Mileage: 342'475
Plate:
Body Type:
Trim Level:
Drive Line:
Engine Type: L6, 12.0L (728 CID)
Fuel Type: Diesel
Horsepower: 300HP (224kW)
Transmission: Manual
VIN #: 1M2AM20C7SM002592

Features and Notes: 1995 Mack RB690S Dump Truck, It is a Tri-Axle and has 18'644 hours, 7-speed transmission, runs and drives, 8' X 16' dump bed, tires are at or below 10% and the tailgate is off, the speedometer and fuel gauge are not working correctly.

703
1995 Mack RB690S Dump Truck, VIN # 1M2AM20C5SM002591
Year: 1995
Make: Mack
Model: RB690S
Vehicle Type: Truck
Mileage: 337'168
Plate:
Body Type:
Trim Level:
Drive Line:
Engine Type: L6, 12.0L (728 CID)
Fuel Type: Diesel
Horsepower: 300HP (224kW)
Transmission: Manual
VIN #: 1M2AM20C5SM002591

Features and Notes: 1995 Mack RB690S Dump Truck, It is a Tri-Axle and has 18'644 hours, 7-speed transmission, runs and drives, 8' X 16' dump bed, tires are at or below 10% and the tailgate is off.  It was driven to the auction and does smoke and seems to be under powered, the speedometer and fuel gauge are not working correctly.

704
1984 International 1955 Dump Truck, VIN # 1HSLRTVN8EHA54030
Year: 1984
Make: International
Model: 1955
Vehicle Type: Truck
Mileage:231'812
Plate:
Body Type:
Trim Level:
Drive Line: 4x2
Engine Type: L6, 7.6L (466 CID)
Fuel Type: Diesel
Horsepower:
Transmission: Manual
VIN #: 1HSLRTVN8EHA54030

Features and Notes:  1984 International 1955 Dump Truck that runs and drives.   It has a 8' wide X 9' long dump bed, diamond plate tool boxes, good tires, air brakes, two-speed axle and a heavy duty hitch. It was driven to the auction location and seems to drive good, the temperature light goes on and off intermittently.  

705
1994 Kenworth T450 Truck, VIN # 2XKND99X5RM635217
Year: 1994
Make: Kenworth
Model: T450
Vehicle Type: Truck
Mileage: 478'195
Plate:
Body Type:
Trim Level:
Drive Line: 6x4
Engine Type: L6, 10.8L
Fuel Type: Diesel
Horsepower:
Transmission: Manual
VIN #: 2XKND99X5RM635217

Features and Notes:  Kenworth day cab semi tractor with a Cummins Engine.  It does run and drive, has dual fuel tanks, missing some batteries and the tires are at or below 25%. It was driven to the auction location and has some issues including bad steering, bad brakes and issues with holding and or building air pressure.  

706
1984 International 1654 Truck, VIN # 1HTLAHEHXEHA38793
Year: 1984
Make: International
Model: 1654
Vehicle Type: Truck
Mileage: 260'589
Plate:
Body Type:
Trim Level:
Drive Line: 4x2
Engine Type: V8, 6.9L
Fuel Type: Diesel
Horsepower:
Transmission: Manual
VIN #: 1HTLAHEHXEHA38793

Features and Notes: Rollback tow truck in running condition.  It has a Challenger steel bed that is 92" wide and 19' long, electric 10'000 winch, manual windows and locks. runs and drives but needs TLC,  (chains and hooks not included.)

707
1995 Chevrolet C3500 Pickup Truck, VIN # 1GBKC34N2SJ101629
Year: 1995
Make: Chevrolet
Model: C3500
Vehicle Type: Pickup Truck
Mileage: 115'382
Plate:
Body Type: 2 Door Cab; Chassis
Trim Level: Base
Drive Line: RWD
Engine Type: V8, 7.4L
Fuel Type: Gasoline
Horsepower:
Transmission: Automatic 
VIN #: 1GBKC34N2SJ101629

Features and Notes:  Good running and driving flatbed truck with only 115'382 miles.  It has a 14' bed with a headache rack.  It includes a toolbox, newer tires, trailer brake hookup, new alternator, newer battery, bench seat, manual windows and locks, GVWR 15'000 lbs, hydraulic brakes and gas engine.   

708
Dump Truck Bed
Dump Truck Bed manufactured by Galion-Godwin.  It is 7' wide X 11' long and has been reconditioned.   It has new paint, new lights, new wood on the sides.   It was last mounted on an International single axle dump truck.  Model # 100USD-11  Serial # B11-0115

709
1997 Chevrolet K1500 Pickup Truck, VIN # 1GCEK14R5VE106520
Year: 1997
Make: Chevrolet
Model: K1500
Vehicle Type: Pickup Truck
Mileage: 174'181
Plate:
Body Type: 2 Door Cab; Regular
Trim Level: Base
Drive Line: 4WD
Engine Type: V8, 5.7L; CPI
Fuel Type: Gasoline
Horsepower:
Transmission:Automatic 
VIN #: 1GCEK14R5VE106520

Features and Notes:  Good running work truck with floor shift 4-wheel drive. It has manual windows and locks and a 8' bed. The frame is rusted through and needs a rear brake line replaced.  

710
2000 GMC Savana Van, VIN # 1GTGG25F0Y1236754
Year: 2000
Make: GMC
Model: Savana
Vehicle Type: Van
Mileage: 300'234
Plate:
Body Type: 3 Door Van; Cargo
Trim Level: Base
Drive Line: RWD
Engine Type: V8, 6.5L; Turbo
Fuel Type: Diesel
Horsepower:
Transmission: Automatic 
VIN #: 1GTGG25F0Y1236754

Features and Notes:  Good running diesel powered work van with newer Yokohama tires. Transmission seems a bit weak in low gear when accelerated hard.   Van does include shelving inside. 

711
2005 Jeep Liberty Multipurpose Vehicle (MPV), VIN # 1J4GL58K25W539713
Year: 2005
Make: Jeep
Model: Liberty
Vehicle Type: Multipurpose Vehicle (MPV)
Mileage: 157'060
Plate:
Body Type: 4 Door Wagon
Trim Level: Limited
Drive Line: 4WD
Engine Type: V6, 3.7L (225 CID)
Fuel Type: Gasoline
Horsepower:
Transmission: Automatic 
VIN #: 1J4GL58K25W539713

Features and Notes:  It is a 4-wheel drive and has a nice body and interior.   It also has power windows, power locks, power mirrors, power seat and sunroof. 

712
2000 Volvo VNL Truck, VIN # 4V4N25UF0YN792813
Year: 2000
Make: Volvo
Model: VNL
Vehicle Type: Truck
Mileage: 1 Million Plus
Plate:
Body Type:
Trim Level:
Drive Line: 4x2
Engine Type: L6, 10.8L (661 CID)
Fuel Type: Diesel
Horsepower: 325-374HP
Transmission: 13 Speed Manual
VIN #: 4V4N25UF0YN792813

Features and Notes: 2000 Volvo VNL Truck with over 1 million miles.   It is powered by a Cummings ISM engine and backed by a 13-speed manual transmission that replaced the original 9-speed.  It is EDL Exempt as the engine has a manufacture date of 1999.  It does smoke when it starts cold.  The steer tires are at 75% and the drives are 25%.  It has a sliding 5th wheel, good air lines, dual tanks, electric brake controller and RV plug for towing campers, wired for Proheat X45 coolant and cab heat, cabinet fits standard Kenworth mini fridge, wired for inverter behind drivers seat, leather air ride seat, air conditioning works, runs and drives good. 

713
1973 Chevy C20 Custom Deluxe Pick-up Truck
1973 Chevy C20 Custom Deluxe Pick-up Truck,  It does run and drive, it has a V-8 gas engine and an automatic transmission and is 2-wheel drive.  It has a Supreme stake side bed that is 7' wide X 9' long. The odometer shows 96'440 original miles. The body is in decent condition.  VIN: CCY243F466776

714
1973 Chevy Cheyenne Super 20 Pick-up Truck
1973 Chevy Cheyenne Super 20 Pick-up Truck that has 87'999 miles.   It has a V-8 gas engine, automatic transmission and floor shift 4-wheel drive.  It is not in running condition and has been parked for 10 years.   Does not have keys.  VIN: CKY243F360906

715
1964 Ford N600
1964 Ford N600.  It has a V-8 gas engine, manual transmission and the miles are unknown, it has an 8' X 14' dump bed that is in good condition and a 17'000 lb GVWR.  It has been parked for several years and is not in running condition.  

716
2003 Ford F-350 Pickup Truck, VIN # 1FTWW32P93EC55919
Year: 2003
Make: Ford
Model: F-350
Vehicle Type: Pickup Truck
Mileage:167'199
Plate:
Body Type: 4 Door Cab; Crew
Trim Level: XL; XLT; Lariat
Drive Line: RWD; Dual Rear Wheels
Engine Type: V8, 6.0L; Turbo
Fuel Type: Diesel
Horsepower:
Transmission: Auto
VIN #: 1FTWW32P93EC55919

Features and Notes:  Very clean low mileage dually diesel that has several options that include the following.   FASS fuel filter system, CS Chip system, High Tech oil cooler, S & B air intake with a K&N Filter, New LED lights, Under coating, Tinted Glass, Sun visor, Extendable Mirrors, Nearly new Tires (1'000 miles), Chrome Exhaust stacks (removed to tow 5th wheel) replaced with new exhaust, Removable B & W hitch or use as ball hitch,  EGR Deleted at 137k miles, New ball joints at 137k, new turbo at 137k, new batteries this year, hasn't seen winter weather in 8 years.   

717
2004 Freightliner FL80 Curtain Side Truck, VIN # 1FVHBXAK24HM57975
Year: 2004
Make: Freightliner
Model: FL80
Vehicle Type: Truck
Mileage: 349'337
Plate:
Body Type:
Trim Level:
Drive Line: 6x4
Engine Type: L6, 7.2L (439 CID)
Fuel Type: Diesel
Horsepower:230
Transmission: 9-Speed Manual
VIN #: 1FVHBXAK24HM57975

Features and Notes:  2004 Freightliner curtain side truck, It has newer curtains, newer batteries, CAT 3126 engine, 9-speed Eaton Fuller transmission, air brakes, GVWR 52'000 lbs, fuel gauge does not work. Runs and drives as it should, clean truck, Title is in transit. 

718
Truck Flat Bed
Truck Flat Bed, It is 7'6'' wide and 9' long with a headache rack.  

719
2004 Chevrolet Silverado Pickup Truck, VIN # 1GCEK19TX4E349338
Year: 2004
Make: Chevrolet
Model: Silverado
Vehicle Type: Pickup Truck
Mileage:147'687
Plate:
Body Type: 4 Door Cab; Extended
Trim Level: Base; LS; LT; Z71; Work Truck
Drive Line: 4WD
Engine Type: V8, 5.3L
Fuel Type: Gasoline
Horsepower:
Transmission: Automatic 
VIN #: 1GCEK19TX4E349338

Features and Notes:  Push button 4-wheel drive, leather interior, ext cab with 3rd and 4th door, 6 1/2' bed, tow package, diamond plate tool box, remote start, power windows, power locks, power seat, power mirrors, nerf bars, bed liner, new rear shocks, tires at 50%, a/c not blowing cold, no check engine lights, works and runs as it should. 

720
1985 GMC C7000 Truck, VIN # 1GDS7D4EXFV617527
Year: 1985
Make: GMC
Model: C7000
Vehicle Type: Truck
Mileage: 130'502
Plate:
Body Type: Medium Conventional Cab & Chassis
Trim Level:
Drive Line: 6x4
Engine Type: V8, 7.0L (427 CID)
Fuel Type: Gasoline
Horsepower:
Transmission: Automatic 
VIN #: 1GDS7D4EXFV617527

Features and Notes: Gas engine was replaced 70k miles ago, air brakes, PTO, diff lock, runs and drives, was driven to the auction, will need tires, dump box is 7' 6'' wide x 11' long.   

721
2004 Chevrolet Tahoe Multipurpose Vehicle (MPV), VIN # 1GNEK13Z44R219648
Year: 2004
Make: Chevrolet
Model: Tahoe
Vehicle Type: Multipurpose Vehicle (MPV)
Mileage: 211'396
Plate:
Body Type: 4 Door Wagon
Trim Level: LS; LT; Z71
Drive Line: 4WD
Engine Type: V8, 5.3L; FFV
Fuel Type: Gasoline/E85
Horsepower:
Transmission: Automatic
VIN #: 1GNEK13Z44R219648

Features and Notes:  It has a 5.3 Liter Vortec V-8, auto transmission, push button 4-wheel drive, sunroof, heated leather interior, 3rd row seating that sits 7, power windows, power locks, power mirrors, power seat, tow package and much more, check engine light on for O2 sensor and tire pressure monitor light.   Runs and drives as it should.   

722
1999 Chevrolet Blazer Multipurpose Vehicle (MPV), VIN # 1GNDT13W6X2170867
Year: 1999
Make: Chevrolet
Model: Blazer
Vehicle Type: Multipurpose Vehicle (MPV)
Mileage: 118'000
Plate:
Body Type: 4 Door Wagon
Trim Level: Base; LS; LT
Drive Line: 4WD
Engine Type: V6, 4.3L; 90 deg.; CPI
Fuel Type: Gasoline
Horsepower:
Transmission: Automatic 
VIN #: 1GNDT13W6X2170867

Features and Notes: This SUV has had the same owner since 2002 and was Grandma driven. It has a 4.3 Liter Voortec V-6, auto transmission, push button 4-wheel drive, 4-door that seats 5, very clean body, power windows, power locks, power mirrors, check engine light is on.   

723
2001 Ford F-250 Pickup Truck, VIN # 1FTNX21F91EC22802
Year: 2001
Make: Ford
Model: F-250
Vehicle Type: Pickup Truck
Mileage: 406'488
Plate:
Body Type: 4 Door Cab; Super Cab
Trim Level: XL; XLT; Lariat
Drive Line: 4WD
Engine Type: V8, 7.3L; OHV 16V; Turbo
Fuel Type: Diesel
Horsepower: 215-235HP
Transmission: Automatic 
VIN #: 1FTNX21F91EC22802

Features and Notes: It has an extended cab, 7' wide x 6 1/2' long flat bed, trailer hitch, power windows, trailer hitch, good tires, 4x4 not currently working.  Check oil light is on and power steering is not working. 

724
1993 Ford Ranger Pickup Truck, VIN # 1FTDR15X4PTA36821
Year: 1993
Make: Ford
Model: Ranger
Vehicle Type: Pickup Truck
Mileage: 41'783 (Rolled Over)
Plate:
Body Type: 2 Door Cab; Super Cab
Trim Level: STX; XL; XLT; Splash
Drive Line: 4WD
Engine Type: V6, 4.0L (244 CID); OHV 12V; EFI
Fuel Type: Gasoline
Horsepower:
Transmission: Manual
VIN #: 1FTDR15X4PTA36821

Features and Notes:m Good running Ford Ranger with 4-wheel drive, and has an extended cab.  It also has oversize 31x10.5-15 Goodyear Wrangler Tires, and a brushguard. 

750
2010 Pro-Track Gooseneck Trailer 8' X27'
2010 Pro-Track Gooseneck Trailer 8' X27' with 5' dove tail and folding ramps.  It has dual tires on 10'000 lb dual axles, 48" tool box, new lights, new decking, fresh paint, good tires, sells with title. VIN: 5BNDG3226AW000159

752
2016 48' Aluminum Flatbed Trailer
2016 48' Aluminum Flatbed Trailer by Direct Trailers.   It has a universal moffett truck attachment on the back, headache rack, straps, sliding rear axel, in good condition.   Tires are at about 25%.   VIN: 5UJFC4822GW002833
Model Number: DT48CFTWSA-RAS-LH-G

754
Storage Van Trailer
Storage Van Trailer, for storage only.   Does not have a title and sells with a bill of sale only. It is 48' long and tires are at or below 10%.  Manufactured by Strick Corp and was built in 1989

755
Storage Van Trailer
Storage Van Trailer, for storage only. Does not have a title and sells with a bill of sale only. It is 48' long and tires are at or below 10%. Manufactured by Monon corporation and was built in 1987.

756
1984 Eager Beaver Lowboy Detach Trailer
1984 Eager Beaver Lowboy Detach Trailer,  Needs new decking, has decent tires, detatch is powered by a 11.5 horsepower Briggs and Stratton engine that is in unknown working condition, it was brought to the auction on a step deck trailer and is not deemed to be road worthy. 
VIN: 112HGB201ET350110 

757
Utility Trailer
Utility Trailer that is 6' 6'' wide ad 8' long, It is a single axle, pulls with a 2'' ball, has a jack, light need some work and sells with a bill of sale only. 

758
Enclosed Trailer 7' X 18'
Enclosed Trailer that is 7' X 18' and has double door on both the front and back,  It is a tandem axle, pulls with 2" ball, has a jack, solid floor, sells with a title. 

759
2020 Formula Cargo Trailer 8'X 18'
2020 Formula Cargo Trailer that is 8' X 18'.  It has tandem 6- lug axles, LED lights, ramp rear door, curb side man door, pulls with 2 5/16" ball, has brakes, damage on right rear, front left and right, paint damage on inside.  Sells with bill of sale only. 

760
5' X 10' Utility Trailer
5' X 10' Utility Trailer with drive on ramp, pulls, with 2" ball and has a jack, It does have a bent tongue, bent axle with one new tire. Sells with bill of sale only. 

761
12' Aluminum John Boat on Trailer
12' Aluminum John Boat on Trailer, It has 2 seats, oars, trailer pulls with a 2'' ball and has a jack, sells with bill of sale only. 

762
13' Aluminum John Boat on Trailer
13' Aluminum John Boat on Trailer, It has 3 seats, 12 volt trolling motor.  It is powered by a vintage Mercury 5 hp outboard engine, the running condition is unknown, does have good compression, on a trailer that does includes a winch and a jack and pulls with a 2'' ball. 
Bill of sale only. 

763
11' Aluminum John Boat on Trailer
11' Aluminum John Boat on a trailer and is powered by a 9.9 hp Evinrude outboard engine, and has a 12 volt trolling motor.  The running condition is unknown, does have good compression, trailer includes a winch and a jack, pulls with a 1 7/8" ball.   Bill of sale only. 

764
Car Dolly
Car Dolly, pulls with a 2" ball, needs a new coupler, does not include straps or lights, has good tires, sells with a bill of sale only. 

765
Surveyor SV291 Camper
Surveyor SV291 Camper by Forrest River.  It has a queen bed in front full bed in the back with a bunk above it.   The dinette converts into a bed and the sofa folds down for more sleeping space as well.   It has a full bathroom, full kitchen including a LP stove and oven, microwave, double sink, full fridge and freezer.   The out side has an awning, folding steps, leveling jacks, 2 LP tanks, power jack and it pulls with a 2 5/16'' ball.  The floor does feel soft. 

766
Wooden Jon Boat 12'
Wooden Jon Boat 12' in good condition.   It sells with 2 sets of oars, 2 life jackets, and a 2 HP Johnson Sea-Horse outboard motor that is in unknown running condition but has good compression.  Sells with bill of sale only. 

767
6' X 10' Utility Trailer
6' X 10' Utility Trailer, It is a single axle with a tilt bed and has good decking, It does include a jack, pulls with a 2'' ball.  It will need new lens on the lights. Sells with a title.   VIN: 4ASTS1011WS002649

768
6' x 10'6'' Equipment Trailer
6' x 10'6'' Equipment Trailer, It is a tandem axle, has 3' drive on ramps, pulls with a 2 5/16'' ball and has a jack.   It does not have lights and the tires are worn.  Sells with a bill of sale only. 

769
2009 Gator Made Deck Over Trailer
2009 Gator Made Deck Over Trailer.  It is 8' X 16' with a 4' dovetail and 4' drive on ramps. It is a tri-axle with brakes and has good tires, pintle style hitch, a new pig tail for the lights and is in good condition.   VIN: 4Z1PB25209S008001   Sells with bill of sale only.

770
7' x 16' Equipment Trailer
7' x 16' Equipment Trailer with a 2' dovetail and 5' drive on ramps. It is a a tandem axle with 8-lug wheels, pulls with a 2 5/16'' ball, has brakes,  a GVW of 12'000 lbs.   
VIN: 1VK500H2751053416

771
Karavan Trailer
Karavan Trailer, 5' X 8' with a tilt deck and a diamond plate toolbox.  It does have new lights and wiring, pulls with a 1 7/8'' ball.  Sells with bill of sale only. 

772
New 2021 Karavan Utility Trailer
New 2021 Karavan Utility Trailer.  It is 82" wide X 12' long and has a 1' dove tail and 4' drive on ramp.   It is a single axle and pulls with a 2'' ball and includes, LED lights, jack, removable and adjustable side rails, tie dow storage in fenders.   This Trailer has only been used twice.  Model KTS-2990-82-13-DT   VIN: 5KTUS1713MF589218

773
Eager Beaver Tri Axle Equipment Trailer
Eager Beaver Tri Axel Equipment Trailer, It is 8 /12' wide and 20' long with the dovetail and has 4' folding ramps, does need tires, lights and brakes are in unknown working condition.   1985 model. 

774
2011 Cargo Express 8' x 20' Enclosed V-Nose Trailer
2011 Cargo Express 8' x 20' Enclosed V-Nose Trailer with ramp rear door, curb side man door, tandem axle with brakes, includes a spare tire, tie down anchors throughout, pulls with 2 5/16" ball.

VIN: 40L1C2020BP900071

775
Equipment Trailer With Ramps
Equipment Trailer With Ramps, It is 6 1/2' wide, 16' long, tandem axle and has 5' folding ramps.   

776
Sea-Nymph Fishing Boat and Trailer
Sea-Nymph Fishing Boat and Trailer,   It is a 14' aluminum fishing boat powered by a 25 HP Mercury outboard motor and has a Motorguide trolling motor that has 46 lbs of thrust.   It also comes with a Humming bird fish finder, live well and a hand winch on the trailer.    The trailer sells with a title and the boat will have a bill of sale.  

777
2011 Elite Gooseneck Trailer
2011 Elite Gooseneck Trailer, It is 8' wide x 20' long with a 5' dovetail and 4 1/2' folding drive on ramps.  The ramp mounts have been moved from original position. The GVWR is 22'500 lbs and has decent tires, brakes and deck.   

778
2000 PJ Trailers Equipment Trailer
2000 PJ Trailers Equipment Trailer.  It is 7' wide x 21' long with a 3' dove tail and 5' drive on ramps. It is a Tri-axle and has (2) 42'' wide Knack job boxes mounted to either side, pintle hitch, needs decking, brake condition is unknown. 

779
1995 Econoline Equipment Trailer
1995 Econoline Equipment Trailer.  It is 8' wide x 18' long with a 5' dove tail and 5' drive on ramps,  It has dual tires on tandem axles with 1 wheel on either side of the suspension springs. It has a 24 ton weight capacity, pintle hitch, brakes are in unknown condition, needs new decking. 

780
2015 Belshe Equipment Trailer
2015 Belshe Equipment Trailer, It is 8 1/2' wide x 21' long plus a 6' dove tail and 7' drive on ramps.   It is a tandem axel with dually tires on each and has a pintle style hitch, good tires, good decking, air brakes are backed off because of a bad splitter valve, GVWR 25'500 lbs.  VIN: 16JF02129F1048076

781
5' x 8' Utility Trailer
5' x 8' Utility Trailer with a tilt deck.  It also includes a jack and 2' sides.   Sells with bill of sale only. 

782
4' x 8' Utility Trailer
4' x 8' Utility Trailer with a 4' x 4' ramp, pulls with 2'' ball.  Sells with Bill of Sale only 
 

783
4' x 10' Utility Trailer
4' x 10' Utility Trailer with a steel wire mesh floor. It includes a jack and pulls with a 2'' ball and it needs lights.   Sells with a bill of sale only. 

784
Sunfish Sailboat
Sunfish Sailboat, approximately 13' long, with mast, no sail, sells with bill of sale only. 

785
Aluminum Fishing Boat & Trailer
Aluminum Fishing Boat & Trailer,   boat is 14' long, has 3 bench seats, Shakespear 12 volt trolling motor, oars, boat cover included, Titles for both trailer and boat. 

786
Tri Axle Equipment Trailer
Tri Axle Equipment Trailer, 9 ton capacity, it is 78" wide x 16' long with folding 4 1/2' ramps, has a toolbox, draw bar style hitch, and draw bar on rear to pull tandem, will need lights,    has title

787
2010 Griffin Dump Trailer
2010 Griffin Dump Trailer  It is 7' wide x 14' long and includes removable ramps, New 7'000 lb tandem 8-lug axles, pulls with a 2 5/16" ball and has a good floor, pulls and operates as it should.  1 owner unit, 
VIN: 4C9BU1429AE020288

788
Truck Flat Bed
Truck Flat Bed, 8' wide x 24' long, 42" high headache rack. 

789
1997 Haulmark 30' Enclosed Gooseneck Trailer
1997 Haulmark 30' Enclosed Gooseneck Trailer, It is 8 1/2' wide x 30' long plus 8' long on top.   It has an interior height of 8' has e-track throughout and tie down points.   It comes with a ramp rear door and curb side man door, It is a tri-axle with 8-lug wheels and good brakes, It also includes items on inside to convert to a camper or toy hauler. 

790
2006 Cargo Express Enclosed Trailer
2006 Cargo Express Enclosed Trailer,   It is 7' wide x 16' long plus v-nose,   It has double rear doors, curb side man door, tandem 8-lug axles, brakes, LED lights, pulls with 2 5/16" ball and a jack.  It has also been a 1-Owner unit.   VIN: 4U01C16246A028447

791
7' X 12' Flatbed Trailer
7' X 12' Flatbed Trailer that sits on tandem 6-lug axles and has brakes, RAM tongue jack, good decking and pulls with a 2 5/16''ball.   VIN: MVIN316868IND

800
Tomahawk 96" Snow/Mulch Bucket

For year-round versatility, there is no better attachment for your skid steer than a Tomahawk 96" Snow/Mulch Bucket. Constructed from high-tensile steel, this bucket has high sides for maximum capacity and a rolled rear bottom for added strength and easier cleanup. The Tomahawk 96" Snow/Mulch Bucket easily scoops up and moves dirt, mulch, snow, gravel and more!

  • 1/8" Grade 50 High-Tensile Steel construction
  • 1/2" x 6" cutting edge 
  • 1.28 Cubic Yard Capacity
  • 96" Wide

801
Tomahawk 90" Snow/Mulch Bucket

For year-round versatility, there is no better attachment for your skid steer than a Tomahawk 90" Snow/Mulch Bucket. Constructed from high-tensile steel, this bucket has high sides for maximum capacity and a rolled rear bottom for added strength and easier cleanup. The Tomahawk 90" Snow/Mulch Bucket easily scoops up and moves dirt, mulch, snow, gravel and more!

  • 1/8" Grade 50 High-Tensile Steel construction
  • 1/2" x 6" cutting edge 
  • 1.2 Cubic Yard Capacity
  • 90" Wide

802
Tomahawk 84" Snow/Mulch Bucket

For year-round versatility, there is no better attachment for your skid steer than a Tomahawk 84" Snow/Mulch Bucket. Constructed from high-tensile steel, this bucket has high sides for maximum capacity and a rolled rear bottom for added strength and easier cleanup. The Tomahawk 84" Snow/Mulch Bucket easily scoops up and moves dirt, mulch, snow, gravel and more!

  • 1/8" Grade 50 High-Tensile Steel construction
  • 1/2" x 6" cutting edge 
  • 1.12 Cubic Yard Capacity
  • 84" Wide

803
Tomahawk 78" Snow/Mulch Bucket

For year-round versatility, there is no better attachment for your skid steer than a Tomahawk 78" Snow/Mulch Bucket. Constructed from high-tensile steel, this bucket has high sides for maximum capacity and a rolled rear bottom for added strength and easier cleanup. The Tomahawk 78" Snow/Mulch Bucket easily scoops up and moves dirt, mulch, snow, gravel and more!

  • 1/8" Grade 50 High-Tensile Steel construction
  • 1/2" x 6" cutting edge 
  • 1.0 Cubic Yard Capacity
  • 78" Wide

804
Tomahawk 72" Snow/Mulch Bucket

For year-round versatility, there is no better attachment for your skid steer than a Tomahawk 72" Snow/Mulch Bucket. Constructed from high-tensile steel, this bucket has high sides for maximum capacity and a rolled rear bottom for added strength and easier cleanup. The Tomahawk 72" Snow/Mulch Bucket easily scoops up and moves dirt, mulch, snow, gravel and more!

  • 1/8" Grade 50 High-Tensile Steel construction
  • 1/2" x 6" cutting edge 
  • 0.95 Cubic Yard Capacity
  • 72" Wide

805
Tomahawk 66" Snow/Mulch Bucket

For year-round versatility, there is no better attachment for your skid steer than a Tomahawk 66" Snow/Mulch Bucket. Constructed from high-tensile steel, this bucket has high sides for maximum capacity and a rolled rear bottom for added strength and easier cleanup. The Tomahawk 66" Snow/Mulch Bucket easily scoops up and moves dirt, mulch, snow, gravel and more!

  • 1/8" Grade 50 High-Tensile Steel construction
  • 1/2" x 6" cutting edge 
  • 0.87 Cubic Yard Capacity
  • 66" Wide

806
Tomahawk 60" Snow/Mulch Bucket

For year-round versatility, there is no better attachment for your skid steer than a Tomahawk 60" Snow/Mulch Bucket. Constructed from high-tensile steel, this bucket has high sides for maximum capacity and a rolled rear bottom for added strength and easier cleanup. The Tomahawk 60" Snow/Mulch Bucket easily scoops up and moves dirt, mulch, snow, gravel and more!

  • 1/8" Grade 50 High-Tensile Steel construction
  • 1/2" x 6" Cutting Edge
  • 0.8 Cubic Yard Capacity
  • 60" Wide

807
Tomahawk 84" Smooth Bucket

Need a better bucket for your skid steer? The general purpose Tomahawk 84" Smooth Bucket features a longer bottom than industry standard for better visibility. The rolled rear bottom adds strength and makes clean-up easier, while the wide 6" cutting edge ensures years of reliable performance. If you need a bucket for your skid steer, then the Tomahawk 84" Smooth Bucket is the obvious choice!

  • 1/2" x 6" Cutting Edge
  • 3/16" Wrap
  • 0.60 Cubic Yard Capacity
  • 84" Wide

808
Tomahawk 78" Smooth Bucket

Need a better bucket for your skid steer? The general purpose Tomahawk 78" Smooth Bucket features a longer bottom than the industry standard for better visibility. The rolled rear bottom adds strength and makes clean-up easier, while the wide 6" cutting edge ensures years of reliable performance. If you need a bucket for your skid steer, then the Tomahawk 78" Smooth Bucket is the obvious choice!

  • 1/2" x 6" Cutting Edge
  • 3/16" Wrap
  • 0.56 Cubic Yard Capacity
  • 78" Wide

809
Tomahawk 72" Smooth Bucket

Need a better bucket for your skid steer? The general purpose Tomahawk 72" Smooth Bucket features a longer bottom than industry standard for better visibility. The rolled rear bottom adds strength and makes clean-up easier, while the wide 6" cutting edge ensures years of reliable performance. If you need a bucket for your skid steer, then the Tomahawk 72" Smooth Bucket is the obvious choice!

  • 1/2" x 6" Cutting Edge
  • 10-Gauge Wrap
  • 0.5 Cubic Yard Capacity
  • 72" Wide

810
Tomahawk 66" Smooth Bucket

Need a better bucket for your skid steer? The general purpose Tomahawk 66" Smooth Bucket features a longer bottom than industry standard for better visibility. The rolled rear bottom adds strength and makes clean-up easier, while the wide 6” cutting edge ensures years of reliable performance. If you need a bucket for your skid steer, then the Tomahawk 66" Smooth Bucket is the obvious choice!

  • 1/2" x 6" Cutting Edge
  • 10-Gauge Wrap
  • 0.46 Cubic Yard Capacity
  • 66" Wide

811
Tomahawk 60" Smooth Bucket

Need a better bucket for your skid steer? The general purpose Tomahawk 60" Smooth Bucket features a longer bottom than industry standard for better visibility. The rolled rear bottom adds strength and makes clean-up easier, while the wide 6” cutting edge ensures years of reliable performance. If you need a bucket for your skid steer, then the Tomahawk 60" Smooth Bucket is the obvious choice!

  • 1/2" x 6" Cutting Edge
  • 10-Gauge Wrap
  • 0.4 Cubic Yard Capacity
  • 60" Wide

812
Tomahawk 78" HD Two-Cylinder Brush Grapple

If you need to move around brush or small logs, then the Tomahawk 78" HD Two-Cylinder Brush Grapple is the perfect attachment for your skid steer. This heavy-duty brush grapple is made from tough 1/2" steel and comes with dual top clamps for irregular-sized loads. The Tomahawk 78" HD Two-Cylinder Brush Grapple allows you to quickly and easily clear brush and other debris from a jobsite. Brush doesn’t stand a chance against this fearsome skid steer attachment!

  • 1/2" All-Steel Construction
  • Dual Top Clamps for irregular-sized loads
  • Dual Cylinder Covers
  • 78" Wide

813
Tomahawk 72" HD Two-Cylinder Brush Grapple

If you need to move around brush or small logs, then the Tomahawk 72" HD Two-Cylinder Brush Grapple is the perfect attachment for your skid steer. This heavy-duty brush grapple is made from tough 1/2" steel and comes with dual top clamps for irregular-sized loads. The Tomahawk 72" HD Two-Cylinder Brush Grapple allows you to quickly and easily clear brush and other debris from a job site. Brush doesn’t stand a chance against this fearsome skid steer attachment!

  • 1/2" All-Steel Construction
  • Dual Top Clamps for irregular-sized loads
  • Dual Cylinder Covers
  • 72" Wide

814
Tomahawk 66" Two-Cylinder Brush Grapple

Save time and effort when clearing brush with the Tomahawk 66” Two-Cylinder Brush Grapple. Constructed from 3/8” steel, this brush grapple makes an easy meal out of troublesome debris. The dual top clamps make the Tomahawk 66” Two-Cylinder Brush Grapple the perfect skid steer attachment for moving around irregularly-shaped loads.

  • 3/8" All-Steel Construction
  • Dual Top Clamps for irregularly-shaped loads
  • Dual Cylinder Covers
  • 66" Wide

815
Tomahawk 66" One-Cylinder Brush Grapple

Clear brush quickly and easily with the rugged Tomahawk 66” One-Cylinder Brush Grapple. Constructed from 3/8” steel, this brush grapple is perfect for moving around troublesome debris.

  • 3/8" All-Steel Construction
  • 3/8" Single Top Clamp
  • Cylinder Cover
  • 66" Wide

816
Tomahawk 66" One-Cylinder Grapple Bucket

Scoop up and secure your load easily with the Tomahawk 66” One-Cylinder Grapple Bucket. Featuring our rolled rear bottom for extra strength and cleanup, this grapple bucket has a tough cutting edge and powerful clamping action. The Tomahawk 66” One-Cylinder Grapple Bucket makes it easy to clamp down on debris and move it around with your skid steer.

  • 10-gauge Steel wrap
  • 1/2" x 6" Cutting Edge
  • 3/8" Top Clamp 
  • Cylinder Cover
  • 66" Wide

817
Tomahawk 72" Rock Bucket Grapple

Built from high-strength steel, the Tomahawk 72" Rock Bucket Grapple is perfect for collecting and securing small rocks and other large debris while allowing dirt to sift through. The grapple allows you to lock materials in place, quickly clearing difficult areas. The Tomahawk 72" Rock Bucket Grapple is tough enough to handle virtually any job you throw at it!

  • 1/4" Grade 50 High Tensile Steel Teeth
  • Cylinder Cover
  • 3/8" Top Clamp

818
Tomahawk 72" Rock Bucket

Clear rocks quickly and easily with our rugged Tomahawk 72" Rock Bucket! Constructed from high-tensile strength, grade 50 steel, our Tomahawk 72" Rock Bucket is built to last. The big teeth can easily rip into the earth, lifting rocks and other debris from the soil. Dirt and smaller objects easily fall through the slotted back and bottom.

  • 1/4" Teeth
  • Grade 50 High-Tensile Steel
  • 72" Wide

819
Tomahawk 66" Rock Bucket

Clear rocks quickly and easily with our rugged Tomahawk 66" Rock Bucket! Constructed from high-tensile strength, grade 50 steel, our Tomahawk 66" Rock Bucket is built to last. The big teeth can easily rip into the earth, lifting rocks and other debris from the soil. Dirt and smaller objects easily fall through the slotted back and bottom.

  • 1/4" Teeth
  • Grade 50 High-Tensile Steel
  • 66" Wide
  • 72" shown in picture

820
Tomahawk Fork Frame w/48" Forks

Add versatility to your skid steer with the Tomahawk Fork Frame w/Forks. Equipped with 48" class II forks, you can easily move around palletized materials. The high-visibility, see-through frame is ideal for operators.

  • 45 1/2" Wide
  • 35 1/2" Tall
  • 48" Class II Forks
  • High Visibility See Through Frame
  • 2800 lb. Weight Rating

821
Tomahawk Fork Frame w/42" Forks

Add versatility to your skid steer with the Tomahawk Fork Frame w/Forks. Equipped with 42" class II forks, you can easily move around palletized materials. The high-visibility, see-through frame is ideal for operators.

  • 45 1/2" Wide
  • 35 1/2" Tall
  • 42" Class II Forks
  • High Visibility See Through Frame
  • 2800 lb. Weight Rating

822
Tomahawk Fork Frame

Add versatility to your skid steer with the Tomahawk Fork Frame. By adding your own forks, you can easily move around palletized materials. The high-visibility, see-through frame is ideal for operators.

  • 45 1/2" wide
  • 35 1/2" tall
  • High Visibility See Through Frame

823
Tomahawk Round Bale Hay Spear Frame

If you live or work on a farm, then you probably know how difficult it can be to move round hay bales. Make that job easier with the Tomahawk Round Bale Hay Spear Frame. The long removable main spear and two removable bottom stabilizing spears allow your skid steer to easily pick up large round bales. The sturdy tubular steel frame is built for years of use. We think you’ll find the Tomahawk Round Bale Hay Spear Frame an indispensable attachment for your skid steer!

  • 1/4"x3"x3" Tubular Steel Frame
  • 49" Removable Main Spear
  • Two 18" Removable Bottom Stabilizing Spears
  • 1800 lb. Weight Rating

824
Tomahawk Square Bale Hay Spear Frame
If you live or work on a farm, then you probably know how difficult it can be to move large square hay bales. Make that job easier with the Tomahawk Square Bale Hay Spear Frame. The three long removable main spears allow your skid steer to easily pick up large square bales. The sturdy tubular steel frame is built for years of use. We think you’ll find the Tomahawk Square Bale Hay Spear Frame an indispensable attachment for your skid steer!
  • 1/4"x3"x3" Tubular Steel Frame 
  • 39" Removable Main Spears (3)
  • 1800 lb. Weight Rating

825
Tomahawk Thumb

The Tomahawk Thumb is the perfect attachment for your small excavator. It offers rigid support for materials when handling them in the bucket. The Tomahawk Thumb adds versatility to your excavator with a three-stage adjustable arm - allowing you to pick up and move objects like never before!

  • 3/8" Material
  • 3-Stage Adjustable Arm

826
Tomahawk Stump Bucket

Having trouble getting those pesky stumps out of the ground? Then the Tomahawk Stump Bucket is the perfect solution! Features four 7/8" thick teeth a 3/8" serrated edge to dig deep and rip those tough roots out of the ground.

  • 7/8" Thick Teeth (4)
  • 1/2" x 6" Cutting Edge
  • 3/8" Serrated Edge
  • 3/16" Wrap

827
Tomahawk Universal Mount Plate

Easily welds to your existing attachment and will allow you to use non-universal attachments on skid steers with the Tomahawk Universal Mount Plate.

  • 3/16" all-steel construction
  • Fits all models of skid loaders

828
Tomahawk Tree Boom

Move trees around easily with the Tomahawk Tree Boom. This attachment is indispensable for landscapers, as it allows you to easily pick up, move and position old and new trees with your skid steer like never before! The Tomahawk Tree Boom is constructed from high-quality steel materials for years of reliable use.

  • 1/4" x 4" x 4" Tube
  • 1/4" Quick Attach Mount Plate
  • 1/2" Upper Hook Plate

829
Tomahawk Trailer Spotter

Move your trailers around easily with our Tomahawk Trailer Spotter. Constructed to withstand the most demanding jobs, this trailer spotter accepts a standard 2" receiver hitch.

  • 3/16" Mount Plate
  • 2-1/2" Square Tube, 3/16" Wall and 13" Long
  • Accepts 2" Receiver Hitch

830
Bradco 48" Pallet Forks
Bradco 48" Pallet Forks for quick attach on tractor loader, good condition with little use. 

831
John Deere MX7 Brush Mower
John Deere MX7 Brush Mower.  It is 7' wide, runs on 540 PTO and 3-point attach. In very good condition. 

832
John Deere Round Bale Spear Attachment
John Deere Round Bale Spear Attachment,  Quick attach for tractor loader,  

833
John Deere 7' 3-Point Rear Blade
John Deere 7' wide  3-Point Rear Blade model RB2084. In good condition. 

834
New Skid Steer Backhoe
New Skid Steer Backhoe with a 9'' wide 2 teeth bucket and stationary 12" thumb.   

835
New Skid Steer 12" Backhoe Bucket
New Skid Steer 12" Backhoe Bucket with 3 teeth

836
New Skid Steer 24" Backhoe Bucket
New Skid Steer 24" Backhoe Bucket with 4 teeth. 

837
New Greatbear Skid Steer Brush Mower
New Greatbear Skid Steer Brush Mower, 66'' wide cut, quick attach. 

838
New Greatbear Skid Steer Brush Mower
New Greatbear Skid Steer Brush Mower, 66'' wide cut, quick attach.

839
New Skid Steer Heavy Grass Fork Grapple
New Skid Steer Heavy Grass Fork Grapple, 76" wide, 8 tooth, 2 cylinder, new in crate 

840
New Skid Steer Heavy Grass Fork Grapple
New Skid Steer Heavy Grass Fork Grapple, 76" wide, 8 tooth, 2 cylinder, new in crate

841
New Skid Steer Heavy Grass Fork Grapple
New Skid Steer Heavy Grass Fork Grapple, 76" wide, 8 tooth, 2 cylinder, new in crate

842
New Skid Steer Auger Attachment
New Skid Steer Auger Attachment with 3 bits, 19'', 14'' and 11'' new in crate,

843
New Skid Steer Auger Attachment
New Skid Steer Auger Attachment with 3 bits, 19'', 14'' and 11'' new in crate,

844
New Skid Steer Trencher Attachment
New Skid Steer Trencher Attachment, Approximately 4' long arm, auger side discharge, new in crate

845
New Skid Steer 72" Rock Grapple Bucket
New Skid Steer 72'' Rock Grapple Bucket, 2-cylinder, 

846
New Skid Steer Vibratory Roller Attachment
New Skid Steer Vibratory Roller Attachment, 72" wide, not for high flow hydraulics, 

847
New Skid Steer Vibratory Roller Attachment
New Skid Steer Vibratory Roller Attachment, 72" wide, not for high flow hydraulics,

848
New Skid Steer Snow Plow Attachment
New Skid Steer Snow Plow Attachment, 86" wide, 

849
New Skid Steer Rotary Cultivator Attachment
New Skid Steer Rotary Cultivator Attachment, 9 tines, 72'' wide working width, new in crate, 

850
Loader Bucket
Loader Bucket that fits a CAT 910 Wheel Loader.   It is 82'' wide and may fit other units also.   In useable condition. 

851
John Deere Roller Fairlead
Roller Fairlead for John Deere 4'000 Series winch

852
John Deere 72" Mower
John Deere 72'' rough cut mower,  540 PTO driven, 3-point lift, in good working condition.   Model 616. 

853
King Kutter 60" Mower
King Kutter 60" Mower, PTO driven and 3-point lift.  In working condition. 

854
Western V-Blade Snow Plow
Western V-Blade Snow Plow,  it is 8'6'' wide, ultra mount, MVP (multi position v plow)  In working condition. 

855
Western V-Blade Snow Plow
Western V-Blade Snow Plow, it is 8'6'' wide, uni-mount,  In working condition.

856
Skid Steer Snow Plow
Skid Steer Snow Plow,  It has a 4-way blade and is 9' wide and is in good working condition. 

857
Snow Ex Salt Spreader
Snow Ex Salt Spreader, model V Maxx 7550, still in working condition.  

858
3-Point Auger Attachment
3-Point Auger Attachment, does not include auger bit.   

859
Bobcat Skid Steer Dozer Blade
Bobcat Skid Steer Dozer Blade, It is 80'' wide and in good working condition and has been recently serviced by a Bobcat dealer.   Model: 80 Dozer    Serial Number 232111995

860
3-Point Finish Mower
3-Point Finish Mower, 72'' wide, 3-point lift and runs on 540 PTO, works but does need some new bearings. 

861
3-Point Snow Blower
3-Point Snow Blower, It is 78" wide, 2-stage augers, runs on 540 PTO and is in working condition. 

862
5' Brush Mower
5' Brush Mower, works good, blades could be sharpened, PTO shaft is 3 years old, 3-point lift.   

863
Skid Loader Forks
Skid Loader Forks,  home built and forks are 48'' long. 

864
Backhoe Bucket
Backhoe Bucket, 18'' wide 4-tooth, known to fit a Case backhoe unsure of model

865
Backhoe Bucket
Backhoe Bucket, 24'' wide 5-tooth, known to fit a Case backhoe unsure of model

865A
CAT Excavator Bucket
CAT Excavator Bucket, approximately 24" wide, 5-tooth with bolt on smooth edge.   Known to fit a CAT 307 SSR and will likely fit others as well. 

866
Set of Forks
Set of Forks  42'' long,  1 is bent.

867
New 40'' Skid Steer Spade Bucket
New 40'' Skid Steer Spade Bucket

867A
New 40'' Skid Steer Spade Bucket
New 40'' Skid Steer Spade Bucket

868
New 3/4 CY Concrete Placement Bucket

869
New 76" Single Cylinder Skeleton Grapple Bucket
New 76" Single Cylinder Skeleton Grapple Bucket

870
New 76" Single Cylinder Skeleton Grapple Bucket
New 76" Single Cylinder Skeleton Grapple Bucket

871
New Skid Steer 70" Root Rake
New Skid Steer 70" Root Rake

872
New Skid Steer Brush Mower

873
New Skid Steer Rock Bucket 84"
New Skid Steer Rock Bucket 84"

874
New Skid Steer Rock Bucket 78"
New Skid Steer Rock Bucket 78"

875
New Skid Steer Rock Bucket 74"
New Skid Steer Rock Bucket 74"

876
New Skid Steer Rock Bucket 68"
New Skid Steer Rock Bucket 68"

877
New Skid Steer Root Grapple 80"
New Skid Steer Root Grapple 80"

878
New Skid Steer Root Grapple 70"
New Skid Steer Root Grapple 70"

879
New Skid Steer Rock & Brush Grapple 84''
New Skid Steer Rock & Brush Grapple 84''

880
New Skid Steer Rock & Brush Grapple 78''
New Skid Steer Rock & Brush Grapple 78''

881
New Skid Steer Rock & Brush Grapple 74''
New Skid Steer Rock & Brush Grapple 74''

882
New Skid Steer Rock & Brush Grapple 68''
New Skid Steer Rock & Brush Grapple 68''

883
New Skid Steer Attach Frame

884
New Skid Steer Attach Frame

885
New Skid Steer Attach Frame

886
New Skid Steer Attach Frame

887
New Skid Steer Attach Frame

888
New Skid Steer Attach Frame

889
New Skid Steer Attach Frame

890
New Skid Steer Attach Frame

891
New Skid Steer Attach Frame

892
New Skid Steer Attach Frame

893
New Skid Steer Attach Frame

894
New Skid Steer Attach Frame

895
New Skid Steer Snow Pusher 8'
New Skid Steer Snow Pusher 8'

896
New Skid Steer Snow Pusher 6'
New Skid Steer Snow Pusher 6'

897
New 72" Class 2 Fork Lift Fork Set of 2, 5500lb Cap Per Fork
New 72" Class 2 Fork Lift Fork Set of 2, 5500lb Cap Per Fork

898
New 84" Light Duty Fork Extensions
New 84" Light Duty Fork Extensions

899
New 84" Light Duty Fork Extensions
New 84" Light Duty Fork Extensions

900
New Skid Steer Plate With Guard

901
New Skid Steer Plate With Guard

902
New Skid Steer Plate With Guard

903
New Fork Frame 48" For Skid Steer
New Fork Frame 48" For Skid Steer

904
New Fork Frame 48" For Skid Steer
New Fork Frame 48" For Skid Steer

905
New Fork Frame 48" For Skid Steer
New Fork Frame 48" For Skid Steer

906
New Fork Frame 48" For Skid Steer
New Fork Frame 48" For Skid Steer

907
New Skid Steer 76" Skeleton Bucket High Sides
New Skid Steer 76" Skeleton Bucket High Sides

908
New Skid Steer 76" Skeleton Bucket High Sides
New Skid Steer 76" Skeleton Bucket High Sides

909
New Skid Steer 72" Bucket With Teeth
New Skid Steer 72" Bucket With Teeth

910
New Skid Steer 72" Bucket With Teeth
New Skid Steer 72" Bucket With Teeth

911
New Skid Steer 78" Bucket With Blade
New Skid Steer 78" Bucket With Blade

912
New Skid Steer 78" Bucket With Blade
New Skid Steer 78" Bucket With Blade

913
New Skid Steer 66" Bucket With Blade
New Skid Steer 66" Bucket With Blade

914
New Skid Steer 66" Bucket With Blade
New Skid Steer 66" Bucket With Blade

915
New Skid Steer 90" Snow Bucket
New Skid Steer 90" Snow Bucket

916
New Skid Steer 90" Snow Bucket
New Skid Steer 90" Snow Bucket

917
New Skid Steer 78" Single Cylinder Grapple Bucket
New Skid Steer 78" Single Cylinder Grapple Bucket

918
New Skid Steer 78" Single Cylinder Grapple Bucket
New Skid Steer 78" Single Cylinder Grapple Bucket

919
New Skid Steer Quick Attach Plate

920
New Skid Steer Quick Attach Plate

921
New Skid Steer Quick Attach Plate

922
New Skid Steer Quick Attach Plate

923
New Skid Steer Quick Attach Plate

924
New Skid Steer Quick Attach Plate

925
New Skid Steer Quick Attach Plate

926
New Skid Steer Quick Attach Plate

927
New Pallet Fork Extensions Light Duty

928
New Pallet Fork Extensions Light Duty

929
New Skid Steer Receiver Hitch Trailer Mover

930
New Skid Steer Receiver Hitch Trailer Mover

931
Skid Steer Power Broom
Skid Steer Power Broom, 68" wide, good bristles, needs chain.

932
3-Point Disc
3-Point Disc, 72'' wide appears to be in decent condition. 

933
Rotary Hoe
Rotary Hoe that is 14'6'' wide and attaches with 3-point hitch. 

934
V-Blade
V-blade is approximately 8' wide unknown fitment 

Photo Gallery

Gallery 1 (2000 images)          Gallery 2 (2000 images)          Gallery 3 (1828 images)

Save Listing As Favorite

Print Listing information

Share This Listing

  • Facebook
  • Email this Listing to a Friend






Other Sales by
This Company

Jan 1
Des Arc, AR


Oct 1
Middlebury, IN



Sponsored Links

Equipment Showcase Auction

Bright Star Realty and Auctions, INC

Bright Star Realty and Auctions, INC


Contact: Loren Beachy
Phone: 574-825-0704
Sale Location
11751 CR 12
Middlebury, IN 46540
Sale Dates and Times
Thursday Jul 1, 2021 Completed
Sale Terms and Conditions

Cash, check, or major credit card(with 2% con. fee). 10% buyers premium applies to onsite bidders. 13% buyers premium online , 7% sales tax will be in effect , buyers are welcome to fill out a valid exemption. All items are sold without reserve. 

Bidder Terms and Conditions

These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer.
 
  1. Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
 
  1. Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded, where required, as follows:
IN, IL , WI , KY , OH , VA , AR , NY, NC, TN, MO .
 
  1. Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer: “Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction. “Absentee Bidder” means a person or entity that submits an Absentee Bid.
“Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION.
“Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids.
“Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected and where a Buyer may pick up Personal Property.

“Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder.

“Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms.

“Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer.
"Buyer" means the Winning Bidder with respect to each Lot of Personal Property or of each parcel of Real Property.
"Buyer's Premium" is an amount with respect to each Lot of Personal Property or with respect to each parcel of Real Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account. For Real Property offered Subject to Seller’s Confirmation, the Buyer’s Premium will be calculated on the amount of the High Bid Subject to Confirmation.

“Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property or Real Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation.

“Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer.

“High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot or on a parcel of Real Property.

“High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on Real Property put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price.
 
“High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot or a parcel of Real Property.

"Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event.

“Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer.

“No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale.

“Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions.

“Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online.

"Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered.

“Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers.

“Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer).

“Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms- length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction.

“Property” means the Real Property and the Personal Property.

“Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium. "Registered Bidder" means a person or entity that has registered to bid at the Auction.

“Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction.
“Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE.

“Reserve Price” means the minimum price that Seller is willing to accept for specific Property.

“Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer.

“Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid.

“Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by
Seller).

"Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid.

“Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction.

“Without Reserve” means Absolute.
 
 
  1. Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.
 
  1. Auction Conducted in the State of Indiana.
 
    1. For Auctions in the State of Indiana and Online. All Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are entered into in the State of Indiana, all bids and payments are received in the State of Indiana, and the Realty Purchase Agreement, if any, will be formed and entered into in the State of Indiana.
    2. For Auctions outside of the State of Indiana. All Property is offered for sale in the state of the Auction Site, and will be sold in the state of the Auction Site. Notwithstanding the physical location of any Bidder or any Participant, these Terms are entered into in the state of the Auction Site, all bids and payments are received in the state of the Auction Site, and the Realty Purchase Agreement, if any, will be formed and entered into in the state of the Auction Site.
 
  1. Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.

The Buyer’s Premium for Personal Property will be amount equal to thirteen percent ( 13%) of the Hammer Price for each Lot Knocked Down at the Auction.

The Buyer’s Premium for Real Property will be amount equal to percent ( %) of the Hammer Price for each parcel of Real Property Knocked Down at the Auction.
 
  1. Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
  2. Nature of the Auction.

X The Auction for the Personal Property is an Absolute Auction.

The Auction for the Personal Property is With Reserve. Auctioneer may Withdraw any Lot offered With Reserve prior to the Fall of the Hammer.
 
  1. Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
 
  1. No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
 
  1. Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
 
    1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
 
    1. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
 
    1. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
 
    1. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
 
    1. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
 
    1. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
 
    1. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
 
    1. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.
 
    1. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties,
(i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
 
    1. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
 
    1. No Reduction or Retraction of Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.
 
    1. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.
 
    1. Online Bids. Online bids may not be reduced or retracted.
 
  1. Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). Absentee Bids may be initiated and advances in accordance with Auctioneer’s policies and procedures. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
 
  1. Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
 
  1. Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
 
  1.  
 
  1. Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
 
  1. Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot or item of Personal Property or each parcel of Real Property will be the Buyer of such Property.
 
  1. All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
 
  1. Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
 
  1. Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.
 
  1. Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or
representation by Auctioneer
 
  1. Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
  1.  
Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
 
  1. Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ring man, or multiple bid assistants or ring men, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
 
  1. Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the

vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
 
  1. All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
 
  1. Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked- Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
 
  1. Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases must be paid for within five (5) days after the close of the Auction. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.
 
  1. Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Disassembly and removal shall be done in a workmanlike manner, and each Buyer shall indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer's employees, agents, representatives, or independent contractors, in connection with the disassembly or removal of any Personal Property. Any and all damages to the Auction Site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller.
 
  1. Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them.
 
  1. Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.
 
  1. No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
 
  1. Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
 
  1. Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.




 
  1. Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled
to specific performance or other equitable relief.
 
  1. Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
 
  1. Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
 
  1. Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
 
  1. Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
 
  1. Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
 
  1. Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim, suit or cause of action relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
 
  1. Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their respective rights hereunder.

Listing Details
Equipment Showcase Auction
Skid loaders ~ Excavating~ Construction Equipment
At Absolute Auction!



Consign now
for FREE
advertising!
Consignments are
wanted including:
• Contractor’s Equipment
• Excavating Equipment
• Trailers
• Skid loaders
• Power Tools
 

00
Information Lot
No minimums, no reserves. Auction will begin at 9:00 AM. Live, phone, and online bidding available. Call Bronson with questions 574.210.3721. Loadout M-F from 8-4. 

01
Selling to Onsite Bidders only starting at 9 AM.
Brand new DeWalt, Makita, and Milwaukee tools, batteries etc.

82
AR 500 Steel Spinner Target 3/8"
AR 500 Steel Spinner Target 3/8"

83
AR 500 Steel Spinner Target 3/8"
AR 500 Steel Spinner Target 3/8"

84
AR 500 Steel Spinner Target 3/8"
AR 500 Steel Spinner Target 3/8"

85
New AR 500 Gong Target 3/8''
New AR 500 Gong Target 3/8''

86
New AR 500 Gong Target 3/8''
New AR 500 Gong Target 3/8''

87
New AR 500 Gong Target 3/8''
New AR 500 Gong Target 3/8''

88
New AR 500 Gong Target 3/8''
New AR 500 Gong Target 3/8''

89
New 3/8" AR 500 Steel Coyote Shooting Target With Heart Flapper
New 3/8" AR 500 Steel Coyote Shooting Target With Heart Flapper

90
New 3/8" AR 500 Steel Coyote Shooting Target With Heart Flapper
New 3/8" AR 500 Steel Coyote Shooting Target With Heart Flapper

91
New 3/8" AR 500 Steel Bear Shooting Target With Heart Flapper
New 3/8" AR 500 Steel Bear Shooting Target With Heart Flapper

92
New 3/8" AR 500 Steel Deer Shooting Target With Heart Flapper
New 3/8" AR 500 Steel Deer Shooting Target With Heart Flapper

93
New 3/8" AR 500 Steel Deer Shooting Target With Heart Flapper
New 3/8" AR 500 Steel Deer Shooting Target With Heart Flapper

94
New 30" x 57" Work Table Unfinished 5/16" Top
New 30" x 57" Work Table Unfinished 5/16" Top

95
New 30" x 57" Work Table Unfinished 5/16" Top
New 30" x 57" Work Table Unfinished 5/16" Top

96
New 30" x 57" Work Table Unfinished 5/16" Top
New 30" x 57" Work Table Unfinished 5/16" Top

97
New 30" x 57" Work Table Unfinished 5/16" Top
New 30" x 57" Work Table Unfinished 5/16" Top

98
New 30" x 57" Work Table Unfinished 5/16" Top
New 30" x 57" Work Table Unfinished 5/16" Top

99
New 30" x 57" Work Table Unfinished 5/16" Top
New 30" x 57" Work Table Unfinished 5/16" Top

100
New 30" x 57" Work Table Black 5/16" Top
New 30" x 57" Work Table Black 5/16" Top

101
New 30" x 57" Work Table Black 5/16" Top
New 30" x 57" Work Table Black 5/16" Top

102
New 30" x 57" Work Table Black 5/16" Top
New 30" x 57" Work Table Black 5/16" Top

103
New 30" x 57" Work Table Black 5/16" Top
New 30" x 57" Work Table Black 5/16" Top

104
New 30" x 57" Work Table Black 5/16" Top
New 30" x 57" Work Table Black 5/16" Top

105
New 30" x 57" Work Table Black 5/16" Top
New 30" x 57" Work Table Black 5/16" Top

106
New 26" x 60" Work Bench Black
New 26" x 60" Work Bench Black

107
New 26" x 60" Work Bench Black
New 26" x 60" Work Bench Black

108
New 26" x 60" Work Bench Black
New 26" x 60" Work Bench Black

109
New 26" x 60" Work Bench Black
New 26" x 60" Work Bench Black

110
New 26" x 60" Work Bench Black
New 26" x 60" Work Bench Black

111
New 26" x 60" Work Bench Black
New 26" x 60" Work Bench Black

165
Magnum 4000 Hot Water Pressure Washer
Magnum 4000 Hot Water Pressure Washer on wheels.   It has a 15 hp gas engine and a diesel powered hot water burner. It runs 3.5 GPM at 4'000 PSI. It has electric and recoil start, It is less that 1 year old and is in good working condition.

112
New 30" x 90" Steel Work Bench
New 30" x 90" Steel Work Bench

166
Pallet of Hoses
Pallet of Hoses, Gardend hoses and a high pressure hose.  

113
New 30" x 90" Steel Work Bench
New 30" x 90" Steel Work Bench

114
New 30" x 90" Steel Work Bench
New 30" x 90" Steel Work Bench

115
New 30" x 90" Steel Work Bench
New 30" x 90" Steel Work Bench

116
New 90" Cattle Feeder Orange
New 90" Cattle Feeder Orange

117
New 90" Cattle Feeder Orange
New 90" Cattle Feeder Orange

118
New 90" Cattle Feeder Orange
New 90" Cattle Feeder Orange

119
New 90" Cattle Feeder Orange
New 90" Cattle Feeder Orange

120
New 90" Cattle Feeder Orange
New 90" Cattle Feeder Orange

121
New 90" Cattle Feeder Orange
New 90" Cattle Feeder Orange

122
New 90" Cattle Feeder Green
New 90" Cattle Feeder Green

123
New 90" Cattle Feeder Green
New 90" Cattle Feeder Green

124
New 90" Cattle Feeder Green
New 90" Cattle Feeder Green

125
New 90" Cattle Feeder Green
New 90" Cattle Feeder Green

126
New 7 CY Telehandler Trash/Debris Container

127
New 2 YD Self Dumping Hopper With Fork Pockets

128
New 2 YD Self Dumping Hopper With Fork Pockets

129
New 2 YD Self Dumping Hopper With Fork Pockets

130
New 2 YD Self Dumping Hopper With Fork Pockets

131
Miller Syncrowave 250 Welder
Miller Syncrowave 250 Welder, arc welder with cooling system, in working condition, does not have a tank. 

132
Chicago Electric 90 Amp Flux Wire Welder
Chicago Electric 90 Amp Flux Wire Welder, in good working condition

135
Craftsman Air Compressor
Craftsman Air Compressor, 5 HP, 20 gallon tank, 125 max psi, 110 volt, in good condition. 

136
12' Bauer Fiberglass Step Ladder
12' Bauer Fiberglass Step Ladder, in good condition. 

137
Oxy Acetylene Torch Set
Oxy Acetylene Torch Set, complete set up, hoses appear to be cracking from age,

138
New Miller CP300 Welder
New Miller CP300 Welder, new unused condition, still in plastic wrapper.   200/230/460 Volt, 3-Phase. 

139
Miller CP300 Welder
Miller CP300 Welder, 3-phase, condition is unknown. 

140
Miller CP250TS with Wire
Miller CP250TS with Wire.   Welder is in good working condition and comes with barrel 1/3 full of welding wire. 

141
Miller DialArc 250 AC Welder
Miller DialArc 250 AC Welder, condition is unknown. 

142
Miller 60 Series Wire Feeder & Long Reach Extension
Miller 60 Series Wire Feeder & Long Reach Extension with digital readout. 

143
Aluminum Welding Spool Gun
Aluminum Welding Spool Gun with long hose and MIller Matic WC-IV weld control box.  Condition is unknown.

144
Predator 8750 Gas Generator
7000 Running watts, 8750 peak watts, A/C 120/240V, electric or recoil start, GFCI protected outlets, low hours, in very good condition

146
Craftsman Drill Press
Craftsman Drill Press mounted on metal shop table.  It has a 1/2 HP, 110V multi speed motor, comes mounted with a cross slide vice. 

147
Lincoln Welding Gun
Lincoln Welding Gun that can reach 25', it is for 400 amp, has a new liner installed and is in working condition. 

148
Tweco Welding Gun
Tweco Welding Gun for Miller Welders, 250 amp, comes with a new liner (not installed). 

149
Enco Belt Sander with Belts
Enco Belt Sander with approximately 20 extra belts, belt size is 4" X 36" with a 6" sanding disc.  

150
Heavy Duty Drill Press Vice
Heavy Duty Drill Press Vice that expands up to 9''

151
Accura Metal Band Saw
Accura Metal Band Saw that is 3 years old, 7" X 9", Operates on 220V single phase electric, it has a 60 degree mitering head, roll case is 7' on one side 5'6'' on the other, includes 10 new blades. 1) 5-7 variable pitch  8) 6-10 variable pitch 1) 8-12 variable pitch. 

152
Port-O-Brake DL860 Metal Brake
Port-O-Brake DL860 Metal Brake, 8' long,  In good condition. 

153
Xtreme Portable Dust Collector
110 Volt, Very good condition

154
Power Wheel Chair
Working condition, includes charger

155
Power Wheel Chair
Working condition, includes charger

156
Power Wheel Chair
Working condition, includes charger

157
Power Wheel Chair
Working condition, includes charger

158
New 40' Shipping Container
New 40' high cube multi-door shipping container, 4 side doors, end doors, 9'6'' high, 8' wide.  

159
New 9' Storage Container
New Storage Container, 9' long, 7'2'' wide, 8' high, double rear door, side man door, sliding window, fork pockets, many possible uses. 

160
New 9' Storage Container
New Storage Container, 9' long, 7'2'' wide, 8' high, double rear door, side man door, sliding window, fork pockets, many possible uses.

161
New 8' Storage Container
New Storage Container, 8' long, 6'6''' wide, 7'4''high, double rear door, side man door, sliding window, fork pockets, many possible uses.

162
New 8' Storage Container
New Storage Container, 8' long, 6'6''' wide, 7'4''high, double rear door, side man door, sliding window, fork pockets, many possible uses.

163
New Hot Water Pressure Washer
New Hot Water Pressure Washer, 4'000 PSI powered by a 420cc gas engine that has electric or recoil start (battery not included). Diesel powered hot water burner, LED work lights, fork pockets for easy transport, 

164
Magnum 4000 Hot Water Pressure Washer
Magnum 4000 Hot Water Pressure Washer on a steel skid for easy mounting in pickup truck or on a trailer.  It has a 15 hp gas engine and a diesel powered hot water burner.   It runs 3.5 GPM at 4'000 PSI.  It has electric and recoil start,  It is less that 1 year old and is in good working condition.   Water tank is approximately 200 Gallons.

167
New Steelman Work Bench Toolbox
New Steelman Work Bench Toolbox model 7ft-10D-2-01B, It has 10 drawers, 2 cabinets, 3 rail sliding drawers, anti slip mats, drawer locks, 110 lb rating per drawer. 

168
New Steelman Work Bench Toolbox
New Steelman Work Bench Toolbox model 7ft-10D-2-01B, It has 10 drawers, 2 cabinets, 3 rail sliding drawers, anti slip mats, drawer locks, 110 lb rating per drawer.

169
New Steelman Work Bench Toolbox
New Steelman Work Bench Toolbox model 7ft-20D-01B, It has 20 drawers, 3 rail sliding drawers, anti slip mats, drawer locks, 110 lb rating per drawer.

170
New Steelman Work Bench Toolbox
New Steelman Work Bench Toolbox model 7ft-20D-01B, It has 20 drawers, 3 rail sliding drawers, anti slip mats, drawer locks, 110 lb rating per drawer.

171
New Steelman Work Bench Toolbox
New Steelman Work Bench Toolbox model 7ft-18HD, It has 18 drawers, 2 cabinets, 3 rail sliding drawers, anti slip mats, drawer locks, 110 lb rating per drawer.

172
New Steelman Work Bench Toolbox
New Steelman Work Bench Toolbox model 7ft-18HD, It has 18 drawers, 2 cabinets, 3 rail sliding drawers, anti slip mats, drawer locks, 110 lb rating per drawer.

173
New Steelman Work Bench Toolbox
New Steelman Work Bench Toolbox model 7ft-18HD, It has 18 drawers, 2 cabinets, 3 rail sliding drawers, anti slip mats, drawer locks, 110 lb rating per drawer.

174
New Cast Iron Anvil
New Cast Iron Anvil, 200lb 

175
New 20'000 lb Electric Winch
New 20'000 lb Electric Winch, 12 volt, ready to install. 

176
New 14' Iron Gate with Deer Logo
New 14' bi-parting wrought iron gate with Deer artwork in the middle of the gate frame. 

177
New Dome Storage Shelter
New Dome Storage Shelter, 30' X 20' X 12', It comes with 6 arches, 12 anchor plates, the door size is 16' wide X 8' high, new in the box. Snow rating of 400lbs per square meter.

178
New Dome Storage Shelter
New Dome Storage Shelter, 30' X 20' X 12', It comes with 6 arches, 12 anchor plates, the door size is 16' wide X 8' high, new in the box.  Snow rating of 400lbs per square meter. 

179
New Self Dumping Hopper
New Self Dumping Hopper, 1 CY capacity, measures 3'6'' X 3'6'' at the top and has fork pockets on the bottom, 

180
New Self Dumping Hopper
New Self Dumping Hopper, 1 CY capacity, measures 3'6'' X 3'6'' at the top and has fork pockets on the bottom,

181
New Kohler 3-In-1 Generator, Compressor and Welder
New Kohler 3-In-1 Generator, Compressor and Welder, 9500W generator, 120 PSI dual tank air compressor and 200 amp max current regulator welder.   It is all powered by a Kohler 14 HP 429cc gas engine that has electric start, remote start and back up recoil start. It has never had gas or oil and is in brand new condition.  

182
New Kohler 3" Trash Pump
New Kohler 3" Water Pump that is powered by a 6.5 HP 196cc gas engine.  It is in brand new condition and never had gas or oil in it.  

183
40'000 BTU Ready Heater
40'000 BTU Ready Heater that runs and operates as it should and can be powered by either diesel or kerosene. 

184
Fork Extensions
Fork Extensions, 8' long, little use and in good condition. 

185
Motorcycle Lift
Motorcycle Lift in good condition with extended sides that are removable.   It also has a drive on ramp that comes off and foot pedal to operate the air, a wheel chock vice. It is wide enought to fit ATV's and some garden tractors.   1'000 lb lift capacity.  

186
Lift Gate
Lift Gate that is 7' wide, came off a box truck and is in working condition.   Installation manual is included. 

187
Pool Slide
Pool Slide 

188
Andersen Windows
Andersen Windows, various sizes of windows, most are vinyl.  

189
Roof Jacks
Roof Jacks, 2 buckets full. 

190
Pallet of New Tile Flooring
Pallet of New Tile Flooring, new in the boxes, 2 different colors.

191
4X4 Treated Posts (10)

192
Barn Metal 23' 16 Pieces A-Panel
Barn Metal 23' 16 Pieces A Panel, brown in color, 3' wide. new condition.

193
Pallet Racking (4) 48'' x 186" Uprights - (20) 8' Beams - (12) Wire Decks
Pallet Racking (4) 48'' x 186" Uprights - (20) 8' Beams - (12) Wire Decks

194
Pallet Racking Beams (14) Various Length
Pallet Racking Beams (14) Various Length

195
Pallet Racking (5) 48'' x 10' Uprights- (26) 8' Beams
Pallet Racking (5) 48'' x 10' Uprights- (26) 8' Beams

751
Deckover Equipment Trailer
Deckover Equipment Trailer that is 8' wide and19' long plus it has a 4' dovetail with folding ramps, It is a tri axle with each being rated at 7'000 lbs with newer G rated tires.   It has new electric brakes, new lights, pintle hitch and does sell with a title.   VIN: PH324161547

196
Pallet Racking Beams (4) 100''
Pallet Racking Beams (4) 100''

197
Pallet Racking (10) 42'' Uprights - (66) 8' Beams- (30) Wire Decks
Pallet Racking (10) 42'' Uprights - (66) 8' Beams- (30) Wire Decks

198
Pallet Racking Beams (14) 102''
Pallet Racking Beams (14) 102''

199
Pallet Racking Beams (8) 11' Beams
Pallet Racking Beams (8) 11' Beams

200
Pallet Racking Deck Pans (4) 48'' x 36''
Pallet Racking Deck Pans (4) 48'' x 36''

676

201
Pallet Racking Wire Decks (16) 48" x 56"
Pallet Racking Wire Decks (16) 48" x 56"

202
Pallet Racking Wire Decks (27) 48" x 58''
Pallet Racking Wire Decks (27) 48" x 58''

203
Pallet Racking Wire Decks (40) 48'' x 32''
Pallet Racking Wire Decks (40) 48'' x 32''

204
Pallet Racking (2) 48" 12'6'' Uprights (2) 48'' x 8' uprights (6) 12' beams (4) Wire Decks
Pallet Racking (2) 48" 12'6'' Uprights (2) 48'' x 8' uprights (6) 12' beams (4) Wire Decks

205
Pallet Racking Uprights (15) 48" x 18'
Pallet Racking Uprights (15) 48" x 18'

206
Pallet Racking (2) 38'' x 9'3'' Uprights - (2) 38'' x x10' uprights - (18) 106'' Arms Bolt Together
Pallet Racking (2) 38'' x 9'3'' Uprights - (2) 38'' x x10' uprights - (18) 106'' Arms Bolt Together

207
Pallet Racking (14) 38'' x 12' Uprights - (78) 106'' Beams - Bolt Together
Pallet Racking (14) 38'' x 12' Uprights - (78) 106'' Beams - Bolt Together

208
Pallet Racking Uprights (4) 42" x 12'
Pallet Racking Uprights (4) 42" x 12'

209
Pallet Racking (2) 38" x 98" Uprights - (4) 106" Beams - Bolt Together
Pallet Racking (2) 38" x 98" Uprights - (4) 106" Beams - Bolt Together

210
Pallet Racking (8) 36'' x 21' Teardrop Uprights
Pallet Racking (8) 36'' x 21' Teardrop Uprights

211
Pallet Racking (6) x 21' Teardrop Uprights
Pallet Racking (6) x 21' Teardrop Uprights

212
Pallet Racking (3) 42" x 12' Upright - (8) 8' Beams
Pallet Racking (3) 42" x 12' Upright - (8) 8' Beams

213
Pallet Racking (5) 48'' x 18' Uprights - (16) 99'' Beams - (16) 48'' x 46'' Wire Decks
Pallet Racking (5) 48'' x 18' Uprights - (16) 99'' Beams - (16) 48'' x 46'' Wire Decks

214
Pallet Racking (23) 106" Beams - Bolt Together
Pallet Racking (23) 106" Beams - Bolt Together

215
Pallet Racking (1) 38" x 10' Upright - (2) 38" x 103" Upright (12) 106" Beams Bolt Together
Pallet Racking (1) 38" x 10' Upright - (2) 38" x 103" Upright (12) 106" Beams Bolt Together

216
Pallet Racking (3) 38" x 12' Uprights - (16) 106" Beams - Bolt Together
Pallet Racking (3) 38" x 12' Uprights - (16) 106" Beams - Bolt Together

217
Pallet Racking (3) 38" x 98" Upright - (8) 106" Beams - Bolt Together
Pallet Racking (3) 38" x 98" Upright - (8) 106" Beams - Bolt Together

218
Pallet Racking (12) 48" x 10' Uprights - (18) 10' Beams - (17) 8' Beams
Pallet Racking (12) 48" x 10' Uprights - (18) 10' Beams - (17) 8' Beams

219
Wire Baskets (2)
Wire Baskets (2), 4' wide x 3'6'' deep x 32'' high. 

220
Wire Baskets (2)
Wire Baskets (2), 4' wide x 3'6'' deep x 32'' high.

221
Wire Baskets (2)
Wire Baskets (2), 4' wide x 3'6'' deep x 32'' high.

222
Wire Baskets (2)
Wire Baskets (2), 4' wide x 3'6'' deep x 32'' high.

223
Wire Baskets (2)
Wire Baskets (2), 4' wide x 3'6'' deep x 32'' high.

224
Wire Baskets (2)
Wire Baskets (2), 4' wide x 3'6'' deep x 32'' high.

225
Wire Baskets (2)
Wire Baskets (2), 4' wide x 3'6'' deep x 32'' high.

226
Wire Baskets (2)
Wire Baskets (2), 4' wide x 3'6'' deep x 32'' high.

227
Wire Baskets (2)
Wire Baskets (2), 4' wide x 3'6'' deep x 32'' high.

228
Wire Basket Shelving (8)
Wire Basket Shelving (8) 2' wide x 3' deep x 2' high.   Baskets are welded together in a stack. 

229
Wire Basket Shelving (8)
Wire Basket Shelving (8) 2' wide x 3' deep x 2' high. Baskets are welded together in a stack.

230
Wire Basket Shelving (4)
Wire Basket Shelving (4) 2' wide x 3' deep x 2' high. Baskets are welded together in a stack.

231
Wire Basket Shelving (6)
Wire Basket Shelving (6) 2' wide x 3' deep x 2' high. Baskets are welded together in a stack.

232
Cantilever Arm Rack Double Sided
Cantilever Arm Rack Double Sided, 7 arms per side, approximately 90" high.  

233
Cantilever Arm Rack Double Sided
Cantilever Arm Rack Double Sided, 7 arms per side, approximately 90" high.

234
Steel Sawhorse Set
Steel Sawhorse Set.  20'' high x 48'' wide. 

235
Steel Sawhorse Set
Steel Sawhorse Set.  18.5" high x 60'' wide. 

236
Steel Sawhorse Set
Steel Sawhorse Set. 18.5" high x 60'' wide. 

237
Steel Sawhorse Set
Steel Sawhorse Set.  (1) 24'' high x 48" wide.   (1) 25" high x 48" wide. 

238
Steel Sawhorse Set
Steel Sawhorse Set.  27" high x 60" wide 

239
LP Tank Approximately 500 Gallon
LP Tank Approximately 500 Gallon. It measures approximately 40" high, 36" diameter and 9' long. 

240
7 Pallets Of Lighting

241
5 Pallets of Lighting

242
1 Pallet of Lighting

243
Tool boxes and Organizers
Tool boxes and Organizers on a pallet, Organizers are full of assorted nuts,bolts and various hardware. 

301
Mcculloch Chain Saw
Mcculloch Chain Saw, 36" bar, unknown engine size, does not have gas but has good compression. 

244
Sidewall Barn Fan
Sidewall Barn Fan, 44'' diameter, 3-phase power. 

245
Sidewall Barn Fan
Sidewall Barn Fan, 44'' diameter, 3-phase power.

246
Sidewall Barn Fan
Sidewall Barn Fan, 44'' diameter, 3-phase power.

247
Diesel Pump
Diesel Pump with 8' of pipe, Gasboy Model, 1820

248
Fuel Tank
Fuel Tank,  60'' wide x 38" diameter.

249
Fuel Tank with Pump
Fuel Tank with Pump,   tank is 67" wide x 48" diameter, Gasboy pump included and in unknown opereating condition. 

250
Hog Roaster
Hog Roaster,   60" wide 

308
Stihl BR600 Backpack Leaf Blower
Stihl BR600 Backpack Leaf Blower, 2-stroke engine, in good running condition. 

300
Husqvarna 353 Chain Saw
Husqvarna 353 Chain Saw, 19" bar, 52cc engine, does not have gas but has good compression. 

302
Echo Chain Saw
Echo Chain Saw with case, 19" bar, no chain, does not have gas but has good compression. 

303
Mcculloch Chain Saw
Mcculloch Chain Saw, model MAC110, with case, 9" bar, does not have gas but has good compression.

304
Yard Machine String Trimmer
Yard Machine String Trimmer, 31cc 2-stroke engine, 17" cut, model Y28, does not have gas but has good compression. 

305
Boles String Trimmer
Boles String Trimmer, model BL100, 17' cut, 31cc 2-stroke engine, does not have gas but has good compression. 

306
Boles String Trimmer
Boles String Trimmer, model BL100, 17' cut, 31cc 2-stroke engine, does not have gas but has good compression.

307
HomeLite Prunner
HomeLite  Prunner, Shrub Shaper 17, 2-stroke engine, does not have gas but has good compression. 

309
Toro Mower/Mulcher
Toro Mower/Mulcher powered by a 6HP Briggs and Stratton engine, does not have gas but has good compression. 

202

310
Mower
Mower with a 3.5 HP Briggs and Stratton engine, 21'' deck, unknown running condition. 

311
Ranch King Riding Mower
Ranch King Riding Mower with a 14.5 HP Briggs and Stratton engine, 42'' mower deck, 7-speed forward and reverse transmission, 5-position deck height, does not have a battery or gas.  

312
Lawn Roller 24"
Lawn Roller 24'',  push by hand or hook to lawn tractor, needs plug, in good condition. 

313
Lawn Cart
Lawn Cart, self dumping, hooks to draw bar, 32'' wide X 40'' long, no tailgate, good condition. 

314
Lawn Cart
Lawn Cart, self dumping, hooks to draw bar, 32'' wide X 40'' long, good condition.

315
Wood Chipper
Wood Chipper with a Briggs and Stratton 5HP engine, does not have gas but has good compression.  

316
Huskee 22 Ton Log Splitter
Huskee 22 Ton Log Splitter with a 190cc Briggs and Stratton engine, pulls with a 2'' ball, does not have gas but has excellent compression. 

317
Log Splitter
Log Splitter with a 5.5 HP Briggs and Stratton engine, pulls with a 2'' ball, does not have gas but has excellent compression. 

318
Advance Retriever 5800 Industrial Sweeper
Advance Retriever 5800 Industrial Sweeper with only 8 Hours!  It has a Nissan LP powered 4-cylinder engine and is in excellent running condition.   It is all hydraulically operated and has a weight of 2'900 lbs.   Serial Number: 1077349

319
1981 Honda Goldwing Interstate GL1100I
1981 Honda Goldwing Interstate GL1100I with 24'838 miles, it has a 4-cylinder 1100cc engine with a 5-speed manual transmission. It does have the side boxes and trunk and includes a cover.  It does not currently run as it has been parked for several years.  Sells with Title- HOWEVER, with the name on the title and the paperwork that is included, it will be difficult to get it titled in your name. You are buying it with the paperwork as is.

320
Dirt Bike
Dirt Bike with a motor and transmission from a Chinese 4-wheeler.  It does start and run.  Sells with a bill of sale only.

321
Motorcycle Dolly
Motorcycle Dolly with a weight capacity of 1'250 lbs and is 8' long with a kickstand tray and is on castors.  Roll motorcycle onto stand to easily move it around garage or storage facility. 

322
Murray Go-Cart
Murray Go-Cart powered by a 318cc Tecumseh engine, has a Comet Clutch and is in running condition, brakes do need attention. 

323
Go-Cart
Go-Cart is in running condition and is powered by a 212cc Predator engine, brakes need attention.

324
Go-Cart
Go-Cart that runs and is powered by a 79cc Predator engine, brakes need attention.  

325
Case 444 Garden Tractor
Case 444 Garden Tractor powered by a Kohler K321 engine with a hydrostatic transmission that has hi-low range. Tractor has been repainted, comes with a 44" mower deck, 42" rear blade, hours are unknown, in good running condition. 

326
Carbide 150cc Go-Cart
Carbide 150cc Go-Cart, It has full suspension 2 bucket seats and is electric start.   It was in running when it was parked but not currently running. 

327
Helix 150cc Go-Cart
Helix 150cc Go-Cart, It has full suspension, bench seat for 2 people and is electric start. It was in running when it was parked but not currently running.

328
Tiron 150cc Go-cart
Tiron 150cc Go-Cart, It has full suspension, bench seat for 2 people and is electric start. It was in running when it was parked but not currently running.

329
Wizard Walk Behind Tractor
Wizard Walk Behind Tractor in unknown running condition.   It currently has a disc on the back and is gas powered.   

330
Predator Engine
Predator Engine,   It is a 420cc gas engine that has electric start and recoil start.   It does not currently have a battery and is mounted to a steel frame.   Running condition is unknown. 

331
John Deere F725 Mower
John Deere F725 Mower with 2'306 hours, It has a Kawasaki F590 liquid cooled v-twin engine, hydrostatic transmission, 54" mower deck and power steering.   It has a recent tune and service and everything works as it should.   PIN: M0F725X041354

332
Simplicity Riding Mower
Simplicity Riding Mower with a Briggs and Stratton Vanguard 16 HP V-Twin engine and hydrostatic transmission. It has a 44'' mowing deck that has adjustable height.  It has a recent tune and service and runs and operates as it should.   

333
Stihl FS55R Weed Trimmer
Stihl FS55R Weed Trimmer, starts, runs and operates. 

334
Stihl SH86C Leaf Blower
Stihl SH86C Leaf Blower, did not start, recoil would not pull.   

335
Stihl BG56C Leaf Blower
Stihl BG86 Leaf Blower, Starts and Runs

336
Stihl BG86 Leaf Blower
Stihl BG86 Leaf Blower, Starts and Runs

337
Poulan Pro Leaf Blower
Poulan Pro Leaf Blower, 25cc 2-stroke, 200 mph, did not start, has good compression.  

338
Stihl SR450 Back Back Sprayer / Leaf Blower
Stihl SR450 Back Back Sprayer / Leaf Blower, runs and operates. 

339
Stihl KM85R Combi Unit
Stihl KM85R Combi Unit, made to be attached to several different attachments, did not start, no gas, good compression 

340
Husqvarna 455 Rancher Chain Saw
Husqvarna 455 Rancher Chain Saw, runs and operates. 

341
Stihl TS670 Concrete Saw
Stihl TS670 Concrete Saw, runs and operates. 

342
Brouwer Sod Cutter
Brouwer Sod Cutter, Honda 5.5 HP GX160 Engine, runs and operates.

343
Maximum Lawn Edger, Honda GX120 engine, did not start, has good compression.  

344
Simplicity Riding Mower
Simplicity Riding Mower, It has a 14.5 hp 500cc engine and a hydrostatic transmission, 6-position deck height, bagger system is included.  It will need a starter before to long. 

345
John Deere D130 Riding Mower (No Deck)
John Deere D130 Riding Mower (No Deck),  It has a 22 HP 656cc Briggs and Stratton engine and a hydrostatic transmission, It has 482 hours, cruise control, runs and operates as it should. 

346
Wen 4750W Dual Fuel Generator
Wen 4750W Dual Fuel Generator that can run on gas or LP.   It has under 10 hours, Electric or recoil start, 246cc engine, with pull handle and on wheels for easy movement.    Almost New Condition 

347
Troy Built Riding Lawn Mower
Troy Built Riding Lawn Mower, It has a 17hp 597cc engine and a hydrostatic transmission, 5-position deck height, wash out 42" mowing deck, under 25 hours. Very good condition.  Serial Number: 4505032373

348
Honda EU2000i Generator Inverter
Honda EU2000i Generator Inverter,   just recently serviced and runs and operates as it should, very quiet.   

349
2010 Yamaha Grizzly 350 ATV, VIN # 5Y4AH28Y8AA008370
Year: 2010
Make: Yamaha
Model: Grizzly 350
Vehicle Type: ATV
Mileage:
Plate:
Body Type:
Trim Level:
Drive Line: 2WD
Engine Type: SOHC; A/C; 4-Stroke
Fuel Type: Gasoline
Horsepower:
Transmission: Automatic 
VIN #: 5Y4AH28Y8AA008370

Features and Notes:  350cc automatic 2-wheel drive ATV.  It does not currently start as it has sat for a year and it is assumed to need a carb clean but does crank over very well.   It also does include a hitch, owners manual and factory tool kit.   This sells with a bill of sale only and also has had a police VIN inspection.

350
Go-Cart
Go-Cart with a 5.5 hp Honda GX160 engine, in running condition. 

351
Go-Cart (No Engine)
Go-Cart (No Engine)  ready to have an engine bolted on.

352
Go-Cart Body
Go-Cart Body, ready to be mounted to cart or keep for a spare. 

353
7200W Generator
7200W Generator, Suburu powered, 296 hours, runs and operates

354
7200W Generator
7200W Generator, Suburu powered, 98 hours, runs and operates and has auto idle. 

355
John Deere 265 Riding Mower
John Deere 265 Riding Mower,   It has a Kawasaki FC540 engime, Hydrostatic transmission, 54" mowing deck, hours are unknown, new battery, works as it should. 

356
Hydro Seeder
Hydro Seeder with 500 gallon tank,  It needs and engine and it has the pump components. the trailer is in decent shape and uses a pintle stlye hitch.  Bill of sale only 

357
(2) 300 Gallon Dual Wall Insulated Tanks

358
Industrial Water Hose and Reel
Industrial Water Hose and Reel, Approximately 700' for traveling sprinkler. 

359
1993 Yamaha Blaster YFS200 ATV, VIN # JY43JMA0XPA146263
Year: 1993
Make: Yamaha Blaster
Model: YFS200
Vehicle Type: ATV
Mileage:
Plate:
Body Type:
Trim Level:
Drive Line:
Engine Type: 1cyl, 195 cc; 2-Stroke
Fuel Type: Gasoline
Horsepower:
Transmission: 6-Speed Manual
VIN #: JY43JMA0XPA146263

Features and Notes: 200cc 2-stroke oil injected air cooled engine, it has new tires.   It has been parked for a few years and curently does not start.

360
Kees Walk Behind Mower
Kees Walk Behind Mower,   It has a 48'' mowing deck, Kawasaki FC420V Engine and is self propelled,   unknown running condition. 

361
Lawn Edger
Lawn Edger with a 3.75 hp Briggs and Stratton engine,  It was in running condition when it was put away last year.

362
Craftsman LTS2000 Riding Lawn Mower
Craftsman LTS2000 Riding Lawn Mower, 20 HP Briggs and Stratton Engine, 42'' Deck, with bagger system, hydrostatic drive transmission, 6-position deck height, runs but needs new battery.

395
Heavy Equipment Key Set 24 Keys
Heavy Equipment Key Set 24 Keys.   Kit includes keys for John Deere, Toyota, Yanmar, Hyster, CAT, Lull, Volvo, Case, Skytrack, Bobcat, Hybrid, Massey Ferguson, Snorkel, JLG, Upright, New Holland, Skyjack, Genie, Snorkel and many more.  

396
Heavy Equipment Key Set 24 Keys
Heavy Equipment Key Set 24 Keys. Kit includes keys for John Deere, Toyota, Yanmar, Hyster, CAT, Lull, Volvo, Case, Skytrack, Bobcat, Hybrid, Massey Ferguson, Snorkel, JLG, Upright, New Holland, Skyjack, Genie, Snorkel and many more.

397
Heavy Equipment Key Set 24 Keys
Heavy Equipment Key Set 24 Keys. Kit includes keys for John Deere, Toyota, Yanmar, Hyster, CAT, Lull, Volvo, Case, Skytrack, Bobcat, Hybrid, Massey Ferguson, Snorkel, JLG, Upright, New Holland, Skyjack, Genie, Snorkel and many more.

398
Heavy Equipment Key Set 24 Keys
Heavy Equipment Key Set 24 Keys. Kit includes keys for John Deere, Toyota, Yanmar, Hyster, CAT, Lull, Volvo, Case, Skytrack, Bobcat, Hybrid, Massey Ferguson, Snorkel, JLG, Upright, New Holland, Skyjack, Genie, Snorkel and many more.

399
Heavy Equipment Key Set 24 Keys
Heavy Equipment Key Set 24 Keys. Kit includes keys for John Deere, Toyota, Yanmar, Hyster, CAT, Lull, Volvo, Case, Skytrack, Bobcat, Hybrid, Massey Ferguson, Snorkel, JLG, Upright, New Holland, Skyjack, Genie, Snorkel and many more.

400
Lister Petter Diesel Engine
Lister Petter Diesel Engine, 4-cylinder engine with radiator, good working condition, on skid.  

401
Go Fast Grade Resaw
Go Fast Grade Resaw with complete run around system, 12 or 24 volt controls, 14'' capacity, all hydraulic set up.

402
Morbark Chip-Pac
Morbark Chip-Pac, 48'', 3-knife, includes chipper, shaker and cyclone, in fair condition. 

403
Dust Blower
Dust Blower, 48" diameter, no power.  In fair condition.  

404
Belt Conveyor
Belt Conveyor that is 30'' wide, 56' long, hydraulic drive, does not include the belt.  

405
Roll Case
Roll Case that is 24' wide and 28' long and comes in 2 sections, rollers are 81/2'' diameter, no power. 

406
Hydraulic Tank Unit
Hydraulic Tank Unit that is 32'' x 60'' x 46" high,  includes 2 pumps, 1 pressure comp and 1 vain type.  

407
Line Shaft
Line Shaft that is 2 7/16" diameter X 7' long and includes bearings and pullys. 

408
Chamfer
Chamfer with air and hydraulic drive and is in good condition. 

409
John Deere Power Unit
John Deere Power Unit,  It is a 4-cylinder and includes the clutch, approximately 80-90 HP, hours are unknown, 

410
Woodmizer LT40 Sawmill
Woodmizer LT40 Sawmill, It is powered by a Honda GX630 engine, it is all manual, hours are unknown, runs and operates as it should, it will have a new battery before auction, includes several new bands and an attachment for shingles.   Serial Number 09881377AK

411
Morbark Chipper
Morbark Chipper that is portable and powered by a Wisconsin V-twin gas engine that has electric start, It is a 3-knife and in good working condition.   It does need a new fuel line 

412
2006 Woodmizer LT70 Sawmill
2006 Woodmizer LT70 Sawmill, Fully portable and has electric drive, full hydraulics, laser light, debarker, 1 1/2 band, chain log turner, no controls or set works. In overall good condition. approximately 1'000 hours.     VIN: 456D724186NCA7446

413
CAT Genset with 400KW Generator
CAT Genset with 400KW Generator, It has a CAT 3406 Turbo diesel engine that has less than 200 hours on rebuild.   It does have new pistons and cylinder sleeves, runs and operates as it should, needs new coolant overflow tank and red button needs held in while starting.   

414
2001 Woodmizer LT40 Sawmill
2001 Woodmizer LT40 Sawmill, It has a Kohler Command 25 hp V-twin engine, It is all hydraulic, has a debarker, an upgraded dog system, board return, new battery, new alternator, new tires, fully portable, in good condition.    VIN: 456B424141NMJ4555

415
Roll Case
Roll Case with 18" wide rollers, 12' long, with pop up transfer chains and built in cant turner, no drive

416
Roll Case
Roll Case, 24" wide x 16' long, no drive. 

417
Belt Conveyor
Belt Conveyor, 20'' wide x 58' long, 4'' sides, hydraulic drive, belt included. 

418
Cooks Bandmill
Cooks AC36 Bandmill, mill is disassembled and appears to be complete, no power on head unit, track is fully hydraulic with 24" log capacity with controls, air set works

419
Cummins Power Unit
Cummins Power Unit.  It is a factory remanufactured 5.9 liter 160 hp Cummins Engine with a complete new clutch and Murphy controls. 

421
Conveyor
Conveyor, 24" long, electric drive, 

422
Bayle Grain Bin Drying Fan with 75HP Motor
Bayle Grain Bin Drying Fan with 75HP Motor, 1'400 bushels per hour, built in 1995, Model AFC445, Serial Number 100123-65.  It has a Baldor 75 hp 3-phase electric motor in good working conditon.

500
2014 Bobcat T870 Skid Loader
2014 Bobcat T870 Skid Loader with only 3'209 hours.   It has new tracks with under 200 hours on them.   It has a Tier 4, 4-cylinder turbo charged Kubota diesel engine rated at 100 horsepower, 2-speed drive,  a lift capacity of 5'200 lbs.  Features include a full cab with heat and air conditioning, auxiliary hydraulics, air suspension seat, ISO or H pattern hand controls, radio, power attach, code start, unit will sell with a 83" bucket.   Product ID Number: A3PG13113

501
Case 1818 Skid Loader
Case 1818 Skid Loader powered by a 2 cylinder Onan gas engine that is rated at 18 HP.   It has a lift capacity of 1'100 lbs, and operating weight of 2'593 lbs, comes with a 60" bucket, shows 2'648 hours, hand controls, tires are at about 10%, just recently serviced and runs as it should.    Fuel petcock was added, must be shut off and let unit turn off or engine will fill with gas.    PIN: JAF007-836

502
John Deere CT322 Skid Loader
John Deere CT322 Skid Loader with 4'268 hours.  It is powered by a 4-cylinder turbo charged  2240 engine that makes 66 HP.  It has a lift capacity of 3'200 lbs and comes with a 72'' bucket.   It has good tracks, power attach, auxiliary hydraulics, hand and foot controls.   It is just out of the shop with a fresh service including new injectors, new fuel pump.  Radiator and drive motors are new 1 year ago.  Product ID Number: T0322TA136307

503
2019 CAT 259D3 Skid Loader
2019 CAT 259D3 Skid Loader with 990 hours.   It is powered by a CAT C3.3B turbo diesel engine that makes 74 horsepower, it is a 2-speed, it has a lift capacity of 2'870 lbs, H2 performance package with auxiliary hydraulics, electronic self level, full cab with heat and cold air conditioning, suspension seat, stereo, hand controls with foot throttle, good tracks, everything works as it should, well cared for very clean machine and it has only had 1 owner.   Product ID Number: CAT0259DJCW902194

Follow this link for a full spec sheet 
https://s7d2.scene7.com/is/content/Caterpillar/CM20190726-932c7-3cd82  

504
2013 CAT 272D Skid Loader
2013 CAT 272D Skid Loader with 3'795 hours, It has a CAT C3.8 Turbo charged 2-speed diesel engine that is rated at 98 HP, auxiliary hydraulics, power attach, full cab with heat and air conditioning, hand controls, foot throttle, suspension seat, 80'' bucket, lift capacity of 3'200 lbs, almost new tires, operating weight of 18'527 lbs.   This is the biggest wheel machine CAT made at the time of manufacture.   Product ID Number CAT0272DTGSL00281

505
Toro Dingo TX-420 Walk Behind Skid Loader
Toro Dingo TX-420 Walk Behind Skid Loader, It is powered by a Kohler V-twin engine and has auxiliary hydraulics, 41" loader bucket, 500 lb lift capacity, quick attach. Rubber tracks will need replaced soon.    Serial Number 280000159

506
2002 Bobcat T200 Skid Loader
2002 Bobcat T200 Skid Loader with 4'667 hours,   It has a 4-cylinder Turbo diesel engine rated at 73 HP, It has a full cab with Heat and A/C ( but doesn't blow cold), auxiliary hydraulics, power attach, hand and foot controls, 2'000 lb lift capacity, it was serviced 100 hours ago, does not include attachment, tracks have 50% tread but are cracked.   Product ID Number: 518915808

540
Genie Z-45/22 Boom Lift
Genie Z-45/22 Boom Lift with 5'448 hours.  It has a 4-cylinder Ford engine that runs on either gas or propane and is 4-wheel drive. It has a maximum platform height of 45' and a maximum reach of 22'.  The platform can hold up to 2 people and has a lift capacity of 500 lbs. It was  built in  1997 everything works and operates as it should and is in good working condition.  The unladen weight is 14'400 lbs.  Serial Number: Z-45-005592

541
2013 Haulotte 45XA Man Lift
2013 Haulotte 45XA Man Lift from a rental fleet in good working condition amd has 9'913 hours.  It has a maximum height of 45' a maximum reach of 27' a lift capacity of 500 lbs or 2 people and weighs 4'900 lbs.   It is powered by a Kawasaki V-twin engine, it is 2-wheel drive, 2-wheel steering, 4 outriggers that have auto leveling and cylinders were recently repacked.  Everything works and is in good condition.  The drive is powered by the gas engine and the lift is powered the electrical system that has a built in charger.  

542
2007 JLG 600S Boom Lift
2007 JLG 600S  Boom Lift that is powered by a dual fuel Ford engine that can run or gas or LP.  It has 4'561 hours, 4-wheel drive, foam filled tires, a platform maximum height of 60', maximum horizontal reach of 49', platform weight capacity of 1'000 lbs, total weight of 21'461 lbs, good paint and decals, in excellent working condition, 
Serial Number: 0300114123

543
2005 JLG E450AJ

SPECIFICATIONS

General

Year
2005
Manufacturer
JLG
Model
E450AJ
Condition
Used
Hours
1457
Stock Number
6576R
Powertrain
Drive
2 WD

560
JLG Scissor Lift 1932E2
JLG Scissor Lift 1932E2 with only 325 hours.  It has a maximum height of 19' and is 32" wide.  It has an extendable platform, 500 lb or 2 person capacity, fork pockets, works and operates as it should.  Serial Number: 200108916

561
MEC Scissor Lift
MEC Scissor Lift model 2548HT, It has a platform height of 25' and a width of 48" and is 8'6'' long with an extendable platform,  It has new batteries, a new charger and fork pockets for easy loading, hours are unknown.  

562
JLG Scissor Lift 2646E2
JLG Scissor Lift 2646E2, has a platform height of 26' and is 46'' wide.  It has an extendable platform that can hold 750 lbs, It has also has new batteries, a new charger and fork pockets for easy loading.   Serial Number 0200087766

563
JLG 1932E2 Scissor Lift
JLG 1932E2 Scissor Lift, It does not currently have batteries and running condition is unknown,    19' Lift height and 32" wide, 500 lb lift capacity, extendable platform, fork pockets for easy loading, 

580
Toyota Forklift
Toyota Forklift with a 7'400 lb lift capacity.   It has a 3 stage mast, side shift, 48" forks, 2-speed forward drive, lp powered, fresh paint, decent tires and runs good.   Tank is not included and the hours are unknown as gauges do not work.  Model: FGC33.  Serial Number: 12547. 

581
Allis-Chalmers Forklift
Allis-Chalmers Forklift with only 8'583 hours and a 12'000 lb lift capacity.  It has 60" forks, dual front tires, 2-stage mast, side shift, weight of 16'248 lbs.   Everything works on this machine, it was a former rental, does have a small oil leak by side shift, lp tank not included, Serial # M1TF83

582
Nissan Forklift
Nissan Forklift with 9'249 hours and a lift capacity of 7'100 lbs.   It has a 3-stage mast, 48" forks, side shift, good tires and weighs 11'800 lbs.   Lp tank is not included.  Serial Number: D238599

583
Big Joe EZ-30 Electric Pallet Jack
Big Joe EZ-30 Electric Pallet Jack. It has a lift capacity of 3'000 lbs, New batteries, built it charger, 48" forks, good working condition, Serial number: E2021760

584
Big Joe EZ-30 Electric Pallet Jack
Big Joe EZ-30 Electric Pallet Jack. It has a lift capacity of 3'000 lbs, New batteries, built it charger, 48" forks, good working condition, Serial number: E2021426

585
Toyota Electric Pallet Jack
Toyota Electric Pallet Jack with a 4'000 lift capacity and has 10'215 hours.   It has a total weight of 800 lbs,  has good batteries and is good working condition.   Model 6HBW20

586
Clark Forklift
Clark Forklift that is LP powered and has a 3-stage mast with side shift and a lift capacity of 2'900 lbs.  It has6'668 hours,  48" forks, new battery, fresh service and is in good running condition.   Serial Number: G127-0275-7645K0F  Model Number: GCS17S

587
Mitsubishi Fork Lift
MitsubishiIt Fork Lift that has 9'012 hours and is LP powered.   It has a lift capacity of 3'000 lbs, 3-stage mast, side shift, 42'' forks, new battery, fresh service and is in good running condition.  Serial Number: AF81B-51026  Model Number : AF81B-51026

588
Crown Electric Pallet Jack
Crown Electric Pallet Jack, in working condition with 46'' forks and has a lift capacity of 4'500 lbs.   Model: WP3035-45.   Serial Number 7A257353

589
Crown Electric Pallet Jack
Crown Electric Pallet Jack, 4'500 lbs lift capacity, in working condition, needs new batteries.  Model WP-2335-45

590
Crown Electric Pallet Jack
Crown Electric Pallet Jack, 4'500 lbs lift capacity, in working condition, needs new batteries. Model WP-2335-45

591
Crown Electric Pallet Jack
Crown Electric Pallet Jack, 4'500 lbs lift capacity, in working condition, needs new batteries. Model WP-2335-45

592
Crown Electric Pallet Jack
Crown Electric Pallet Jack, 4'500 lbs lift capacity, in working condition but needs some tlc,  needs new batteries. Model WP2035-45

600
CAT 910 Wheel Loader
CAT 910 Wheel Loader with 8'067 hours, It has a 9'10'' bucket, 3 speed transmission and is powered by CAT 4 cylinder 3204 diesel engine that is rated at 65 horsepower and has a weight of 14'200 lbs. The tires are at about 10%.  Serial Number: 80U0430

601
1998 CAT 924F Wheel Loader
1998 CAT 924F Wheel Loader with 23'886 hours.  It is powered by a CAT 3114 turbo charged diesel engine that is rated at 111 HP.   The engine is backed by a Powershift Transmission with 4 forward and 3 reverse gears. It has a weight of 20'000 lbs. It has a full cab with heat and a/c and a suspension seat.  It sells with 44'' forks.  The machine works and operates as it should.  The tires are rated at 25-50%.  Product ID Number : 5NN00223

602
Loader Bucket
Loader Bucket that is 94" wide, has a good edge, known to fit a CAT 924F and possibly other models also.  

603
2 Wheel Loader Tires
2 Wheel Loader Tires  size 17.5R 25 both have low tread but are still in useable condition.  

604
2007 Volvo L110F Wheel Loader
2007 Volvo L110F Wheel Loader. It is powered by a 6 cylinder 2244  turbo charged and intercooled diesel engine rated at 228 horsepower that is backed by an automatic powershift transmission that has 4 forward and 4 reverse gears.  It has only 4'787 hours, a complete cab with heat and air conditioning, a suspension seat, adjustable steering, quick attach and much more.   This loader has been very well professionally maintained and service records are available.  Bucket and forks sold separately.    Product ID Number: L110FV61618

605
Wheel Loader Bucket
Wheel Loader Bucket, Volvo model 80575  it is 9'6'' wide and 5' high with quick attach and is in good condition. 

606
Wheel Loader Forks
Wheel Loader Forks that are 57'' long and have adjustable width.  They are in good condition. 

607
Hyster C612 Smooth Drum Vibratory Roller
Hyster Smooth Drum Vibratory Roller that is powered by a Detroit Diesel engine.   The drum is 6' wide and is in good condition, the hours are unknown but believed to be 3'500-4'000 and a new meter was put on 28 hours ago.   It runs and operates as it should. The tire does have a slow leak.   Serial Number 1630

610
1995 Case 850G Longtrack Dozer
1995 Case 850G Longtrack Dozer with 6'846 hours, It runs and operates and has 18'' wide tracks, 8 1/2' blade.  It is powered by a Case 6T-590 6-cylinder engine that nets about 120 horsepower and has 4 forward and 4 reverse gears and seems to be  in good working condition.  Product ID Number: JJG0217824

611
Fiat-Allis FD9 Dozer
Fiat Allis FD9 Dozer with 4'363 hours and is powered by a turbo charged diesel engine rated at 90 HP.  It has a 9' 4-way blade, decent undercarriage, Everything works and is in good condition.   

612
1970 Case 310G Crawler Dozer
1970 Case 310G Crawler Dozer, it has a 38 hp 4-cylinder gas engine, 4 way  blade that is 6 1/2' wide, 4 speed forward gears and 1 reverse, newer sprockets and rollers, grease tighteners, 25 hours on engine rebuild, no leaks, works and operates as it should.   Serial Number: 3039711   ***update NEW Decals***

620
1997 Case 9020B Excavator
1997 Case 9020B Excavator with 11'398 hours.  It has 2' wide tracks, 42" 5-tooth bucket and a hydraulic thumb.  The front glass is missing the other glass is discolored and it does have some leaks.   It has a digging depth of approximately 20' and a reach across the ground of about 30' and weighs 35'275 pounds.   It has a 4 cylinder 2239 turbo charged diesel engine that puts out 106 horsepower, It is in good running condition. Product ID Number: DAC0201476

621
CAT 307 SSR Excavator
CAT 307 SSR Excavator in good running condition.   It has rubber tracks, articulating stick, engine rated at 40 HP, weight if 16'300, reach across the ground is 24' and dig depth is 15'.  It has a 7'6" back fill blade, 33" 7-tooth bucket with smooth edge attachment, mechanical thumb, It is missing the sunroof and door window.   Good operating machine.   

622
Kubota KX027 Mini-Excavator
Kubota KX027 Mini-Excavator with 3'489 hours.  It has a 20" bucket with a hydraulic thumb, 58" backfill blade, 12" wide steel tracks. It is powered by a 4-cylinder Kubota diesel engine and is in working condition however the backfill blade does not go up.   Serial Number: 10036.  Engine Number 218455

623
Insley Crane
Insley Crane with a 35' boom,   It ran and operated when it was parked 8 years ago.   It sells offsite and can be viewed at 16483 CR 8  Bristol, IN 46507.  Buyer is responsible for loading and removal.   

624
2008 CAT 303C CR Mini Excavator
2008 CAT 303C CR Mini Excavator with around 3'000 hours.   It is powered by a CAT 3 cylinder diesel engine rated at 30 HP and is a 2-speed.   It has a 24" 5-tooth bucket with a hydraulic thumb, mechanical quick coupler, 5' 4-way back fill blade, reach is 16', max dig depth is 9'6'', rubber tracks are at about 50%, pins a bit sloppy, runs and operates and tracks well, hour meter is not correct.   Serial Number: BXT02888

625
Vermeer Trencher V2050
Vermeer Trencher V2050.  It has a 52'' arm,  a Kohler Command 20 hp engine, hour meter shows 708 hours, runs and operates. 

630
John Deere 440D Skidder
John Deere 440D Skidder with only 151 hour on rebuilt motor and new transmission seals, bearing, clutch and flywheel as of 4-27-2021.  It is powered by a 90 HP 4-cylinder turbo charged John Deere 4-276T engine. It is 4 wheel drive (1 drive wheel doesnt engage) has newer tires rated at approximately 90%. It has a 7 foot blade, 100' of new cable on winch with 3 choker cables, just had a tune and service and comes with a full set of books and manuals,   PIN: DW440DA501857

631
Vermeer BC600XL Chipper
Vermeer BC60XL Chipper with a Kohler Command Pro 27 HP V-Twin electric start Engine with 732 hours. It is 6" rated and has auto feed, This machine is outfitted with a hydraulic drive for easy movement, pulls with 2" ball and has lights,   VIN: 1VR2091HB1003980

631A
Vermeer BC1500 Chipper
Vermeer BC1500 Chipper in good working condition, It has a John Deere 125 hp diesel engine, approximately 7'600 hours, recently serviced, pintle hitch, good tires, works and operates as it should. 

632
Timberjack 225 Skidder
Timberjack 225 Skidder that is powered by a 353 Detroit Diesel engine and has a 4-speed forward and reverse transmission with Hi-low gear and it is a 4-wheel drive.   It also has an Eaton 20 ton winch that has 4 speed forward and reverse with Hi-low and comes with 3 chokers and has the room for 4 chokers. The winch cylinders hve been recently rebuilt and has a new kit in it. The tires hve good tread depth but do have some chunks out of some of the lugs and they are foam filled. Everything works as it should and it does not have any leaks and the hours are unknown.   Serial Number: 792980

650
2007 John Deere 5325 tractor with 542 Loader
2007 John Deere 5325 with a 542 loader bucket and only has 590 hours! It is powered by a 3.1 liter 5-cylinder 67 horsepower turbo diesel engine and backed by a 12-speed transmission with power reverse.  It is a 4-wheel drive, comes with a 6' quick attach loader bucket, 55 horsepower PTO, 3 point hitch, remote hydraulics, excellent paint, always stored inside, tires rated over 80%, Very nice clean machine.   Serial Number : LV5325R334428

651
2006 Kubota BX1850
2006 Kubota BX1850 with only 7 hours.   It has a 3 cylinder Kubota diesel engine rated at 18 HP, a hydrostatic transmission, hydrostatic power steering, 4-wheel drive, a 54" mower deck, 3-point hitch and PTO.   Several attachments are made for this tractor including front loaders.   Model BX1850T54   Serial Number: 53974

652
Fordson Major Diesel Tractor
Fordson Major Diesel Tractor, It is powered by a Ford 3.6 liter 4-cylinder diesel engine and is backed by a 6-speed manual transmission. It is a 2 wheel drive, and has a 540 PTO, 3-point hitch, draw bar, rear hydraulics, original hours are unknown.  It does start and run.  

653
1955 Farmall 400 Row Crop Tractor
1955 Farmall 400 Row Crop Tractor,  It is powered bt a 4.3 liter gas engine that is rated at 50 horse power and backed by a manual transmission with 10 forward gears and 2 reverse gears.  It is a 2wd and has a 540 PTO, Drawbar , 3-point hitch, rear hydraulics.  It runs and operates good and has fresh paint.   Serial Number: 14698

654
1997 Case 4230 Tractor
1997 Case 4230 Tractor that is rated at 80 horsepower.  It is powered by a Case 4.4 liter diesel engine and backed by a manual synchromesh transmission with 8 forward gears and 4 reverse.  It has 3'070 hours, full cab with heat and a/c, remote hydraulics, drawbar,  3-point hitch, 540 and 1000 PTO, rear tires are worn, one owner machine, Three point is currently stuck in place. Had worked but seller hasn’t used it in multiple years.
Slight fuel leak.
Product ID Number: 4230RXLJJE0916598

655
Knight Pro Twin Slinger Manure Spreader
Knight Pro Twin Slinger Manure Spreader with side discharge, 16' long, augers are wore, in working condition, stored inside, Model 8024

656
1941 Farmall H Tractor
1941 Farmall H Tractor with a 4 cylinder gas engine and a 5-speed manual transmission, 540 PTO, drawbar, 6 volt electrical system, runs and drives.   

700
1995 Mack RB690S Dump Truck, VIN # 1M2AM20C2SM002600
Year: 1995
Make: Mack
Model: RB690S
Vehicle Type: Truck
Mileage: 332'005
Plate:
Body Type:
Trim Level:
Drive Line:
Engine Type: L6, 12.0L (728 CID)
Fuel Type: Diesel
Horsepower: 300HP (224kW)
Transmission: Manual
VIN #: 1M2AM20C2SM002600

Features and Notes:  1995 Mack RB690S Dump Truck, It is a Tri-Axle and has 19'428 hours, 7-speed transmission, runs and drives, 8' X 16' dump bed, tires are at or below 10%, the speedometer and fuel gauge are not working correctly. 

701
1995 Mack RB690S Dump Truck, VIN # 1M2AM20C9SM002593
Year: 1995
Make: Mack
Model: RB690S
Vehicle Type: Truck
Mileage:257'283
Plate:
Body Type:
Trim Level:
Drive Line:
Engine Type: L6, 12.0L (728 CID)
Fuel Type: Diesel
Horsepower: 300HP (224kW)
Transmission: Manual
VIN #: 1M2AM20C9SM002593

Features and Notes: 1995 Mack RB690S Dump Truck, It is a Tri-Axle and has 18'918 hours, 7-speed transmission, runs and drives, 8' X 16' dump bed, tires are at or below 10% and the tailgate is off, the speedometer and fuel gauge are not working correctly.

702
1995 Mack RB690S Dump Truck, VIN # 1M2AM20C7SM002592
Year: 1995
Make: Mack
Model: RB690S
Vehicle Type: Truck
Mileage: 342'475
Plate:
Body Type:
Trim Level:
Drive Line:
Engine Type: L6, 12.0L (728 CID)
Fuel Type: Diesel
Horsepower: 300HP (224kW)
Transmission: Manual
VIN #: 1M2AM20C7SM002592

Features and Notes: 1995 Mack RB690S Dump Truck, It is a Tri-Axle and has 18'644 hours, 7-speed transmission, runs and drives, 8' X 16' dump bed, tires are at or below 10% and the tailgate is off, the speedometer and fuel gauge are not working correctly.

703
1995 Mack RB690S Dump Truck, VIN # 1M2AM20C5SM002591
Year: 1995
Make: Mack
Model: RB690S
Vehicle Type: Truck
Mileage: 337'168
Plate:
Body Type:
Trim Level:
Drive Line:
Engine Type: L6, 12.0L (728 CID)
Fuel Type: Diesel
Horsepower: 300HP (224kW)
Transmission: Manual
VIN #: 1M2AM20C5SM002591

Features and Notes: 1995 Mack RB690S Dump Truck, It is a Tri-Axle and has 18'644 hours, 7-speed transmission, runs and drives, 8' X 16' dump bed, tires are at or below 10% and the tailgate is off.  It was driven to the auction and does smoke and seems to be under powered, the speedometer and fuel gauge are not working correctly.

704
1984 International 1955 Dump Truck, VIN # 1HSLRTVN8EHA54030
Year: 1984
Make: International
Model: 1955
Vehicle Type: Truck
Mileage:231'812
Plate:
Body Type:
Trim Level:
Drive Line: 4x2
Engine Type: L6, 7.6L (466 CID)
Fuel Type: Diesel
Horsepower:
Transmission: Manual
VIN #: 1HSLRTVN8EHA54030

Features and Notes:  1984 International 1955 Dump Truck that runs and drives.   It has a 8' wide X 9' long dump bed, diamond plate tool boxes, good tires, air brakes, two-speed axle and a heavy duty hitch. It was driven to the auction location and seems to drive good, the temperature light goes on and off intermittently.  

705
1994 Kenworth T450 Truck, VIN # 2XKND99X5RM635217
Year: 1994
Make: Kenworth
Model: T450
Vehicle Type: Truck
Mileage: 478'195
Plate:
Body Type:
Trim Level:
Drive Line: 6x4
Engine Type: L6, 10.8L
Fuel Type: Diesel
Horsepower:
Transmission: Manual
VIN #: 2XKND99X5RM635217

Features and Notes:  Kenworth day cab semi tractor with a Cummins Engine.  It does run and drive, has dual fuel tanks, missing some batteries and the tires are at or below 25%. It was driven to the auction location and has some issues including bad steering, bad brakes and issues with holding and or building air pressure.  

706
1984 International 1654 Truck, VIN # 1HTLAHEHXEHA38793
Year: 1984
Make: International
Model: 1654
Vehicle Type: Truck
Mileage: 260'589
Plate:
Body Type:
Trim Level:
Drive Line: 4x2
Engine Type: V8, 6.9L
Fuel Type: Diesel
Horsepower:
Transmission: Manual
VIN #: 1HTLAHEHXEHA38793

Features and Notes: Rollback tow truck in running condition.  It has a Challenger steel bed that is 92" wide and 19' long, electric 10'000 winch, manual windows and locks. runs and drives but needs TLC,  (chains and hooks not included.)

707
1995 Chevrolet C3500 Pickup Truck, VIN # 1GBKC34N2SJ101629
Year: 1995
Make: Chevrolet
Model: C3500
Vehicle Type: Pickup Truck
Mileage: 115'382
Plate:
Body Type: 2 Door Cab; Chassis
Trim Level: Base
Drive Line: RWD
Engine Type: V8, 7.4L
Fuel Type: Gasoline
Horsepower:
Transmission: Automatic 
VIN #: 1GBKC34N2SJ101629

Features and Notes:  Good running and driving flatbed truck with only 115'382 miles.  It has a 14' bed with a headache rack.  It includes a toolbox, newer tires, trailer brake hookup, new alternator, newer battery, bench seat, manual windows and locks, GVWR 15'000 lbs, hydraulic brakes and gas engine.   

708
Dump Truck Bed
Dump Truck Bed manufactured by Galion-Godwin.  It is 7' wide X 11' long and has been reconditioned.   It has new paint, new lights, new wood on the sides.   It was last mounted on an International single axle dump truck.  Model # 100USD-11  Serial # B11-0115

709
1997 Chevrolet K1500 Pickup Truck, VIN # 1GCEK14R5VE106520
Year: 1997
Make: Chevrolet
Model: K1500
Vehicle Type: Pickup Truck
Mileage: 174'181
Plate:
Body Type: 2 Door Cab; Regular
Trim Level: Base
Drive Line: 4WD
Engine Type: V8, 5.7L; CPI
Fuel Type: Gasoline
Horsepower:
Transmission:Automatic 
VIN #: 1GCEK14R5VE106520

Features and Notes:  Good running work truck with floor shift 4-wheel drive. It has manual windows and locks and a 8' bed. The frame is rusted through and needs a rear brake line replaced.  

710
2000 GMC Savana Van, VIN # 1GTGG25F0Y1236754
Year: 2000
Make: GMC
Model: Savana
Vehicle Type: Van
Mileage: 300'234
Plate:
Body Type: 3 Door Van; Cargo
Trim Level: Base
Drive Line: RWD
Engine Type: V8, 6.5L; Turbo
Fuel Type: Diesel
Horsepower:
Transmission: Automatic 
VIN #: 1GTGG25F0Y1236754

Features and Notes:  Good running diesel powered work van with newer Yokohama tires. Transmission seems a bit weak in low gear when accelerated hard.   Van does include shelving inside. 

711
2005 Jeep Liberty Multipurpose Vehicle (MPV), VIN # 1J4GL58K25W539713
Year: 2005
Make: Jeep
Model: Liberty
Vehicle Type: Multipurpose Vehicle (MPV)
Mileage: 157'060
Plate:
Body Type: 4 Door Wagon
Trim Level: Limited
Drive Line: 4WD
Engine Type: V6, 3.7L (225 CID)
Fuel Type: Gasoline
Horsepower:
Transmission: Automatic 
VIN #: 1J4GL58K25W539713

Features and Notes:  It is a 4-wheel drive and has a nice body and interior.   It also has power windows, power locks, power mirrors, power seat and sunroof. 

712
2000 Volvo VNL Truck, VIN # 4V4N25UF0YN792813
Year: 2000
Make: Volvo
Model: VNL
Vehicle Type: Truck
Mileage: 1 Million Plus
Plate:
Body Type:
Trim Level:
Drive Line: 4x2
Engine Type: L6, 10.8L (661 CID)
Fuel Type: Diesel
Horsepower: 325-374HP
Transmission: 13 Speed Manual
VIN #: 4V4N25UF0YN792813

Features and Notes: 2000 Volvo VNL Truck with over 1 million miles.   It is powered by a Cummings ISM engine and backed by a 13-speed manual transmission that replaced the original 9-speed.  It is EDL Exempt as the engine has a manufacture date of 1999.  It does smoke when it starts cold.  The steer tires are at 75% and the drives are 25%.  It has a sliding 5th wheel, good air lines, dual tanks, electric brake controller and RV plug for towing campers, wired for Proheat X45 coolant and cab heat, cabinet fits standard Kenworth mini fridge, wired for inverter behind drivers seat, leather air ride seat, air conditioning works, runs and drives good. 

713
1973 Chevy C20 Custom Deluxe Pick-up Truck
1973 Chevy C20 Custom Deluxe Pick-up Truck,  It does run and drive, it has a V-8 gas engine and an automatic transmission and is 2-wheel drive.  It has a Supreme stake side bed that is 7' wide X 9' long. The odometer shows 96'440 original miles. The body is in decent condition.  VIN: CCY243F466776

714
1973 Chevy Cheyenne Super 20 Pick-up Truck
1973 Chevy Cheyenne Super 20 Pick-up Truck that has 87'999 miles.   It has a V-8 gas engine, automatic transmission and floor shift 4-wheel drive.  It is not in running condition and has been parked for 10 years.   Does not have keys.  VIN: CKY243F360906

715
1964 Ford N600
1964 Ford N600.  It has a V-8 gas engine, manual transmission and the miles are unknown, it has an 8' X 14' dump bed that is in good condition and a 17'000 lb GVWR.  It has been parked for several years and is not in running condition.  

716
2003 Ford F-350 Pickup Truck, VIN # 1FTWW32P93EC55919
Year: 2003
Make: Ford
Model: F-350
Vehicle Type: Pickup Truck
Mileage:167'199
Plate:
Body Type: 4 Door Cab; Crew
Trim Level: XL; XLT; Lariat
Drive Line: RWD; Dual Rear Wheels
Engine Type: V8, 6.0L; Turbo
Fuel Type: Diesel
Horsepower:
Transmission: Auto
VIN #: 1FTWW32P93EC55919

Features and Notes:  Very clean low mileage dually diesel that has several options that include the following.   FASS fuel filter system, CS Chip system, High Tech oil cooler, S & B air intake with a K&N Filter, New LED lights, Under coating, Tinted Glass, Sun visor, Extendable Mirrors, Nearly new Tires (1'000 miles), Chrome Exhaust stacks (removed to tow 5th wheel) replaced with new exhaust, Removable B & W hitch or use as ball hitch,  EGR Deleted at 137k miles, New ball joints at 137k, new turbo at 137k, new batteries this year, hasn't seen winter weather in 8 years.   

717
2004 Freightliner FL80 Curtain Side Truck, VIN # 1FVHBXAK24HM57975
Year: 2004
Make: Freightliner
Model: FL80
Vehicle Type: Truck
Mileage: 349'337
Plate:
Body Type:
Trim Level:
Drive Line: 6x4
Engine Type: L6, 7.2L (439 CID)
Fuel Type: Diesel
Horsepower:230
Transmission: 9-Speed Manual
VIN #: 1FVHBXAK24HM57975

Features and Notes:  2004 Freightliner curtain side truck, It has newer curtains, newer batteries, CAT 3126 engine, 9-speed Eaton Fuller transmission, air brakes, GVWR 52'000 lbs, fuel gauge does not work. Runs and drives as it should, clean truck, Title is in transit. 

718
Truck Flat Bed
Truck Flat Bed, It is 7'6'' wide and 9' long with a headache rack.  

719
2004 Chevrolet Silverado Pickup Truck, VIN # 1GCEK19TX4E349338
Year: 2004
Make: Chevrolet
Model: Silverado
Vehicle Type: Pickup Truck
Mileage:147'687
Plate:
Body Type: 4 Door Cab; Extended
Trim Level: Base; LS; LT; Z71; Work Truck
Drive Line: 4WD
Engine Type: V8, 5.3L
Fuel Type: Gasoline
Horsepower:
Transmission: Automatic 
VIN #: 1GCEK19TX4E349338

Features and Notes:  Push button 4-wheel drive, leather interior, ext cab with 3rd and 4th door, 6 1/2' bed, tow package, diamond plate tool box, remote start, power windows, power locks, power seat, power mirrors, nerf bars, bed liner, new rear shocks, tires at 50%, a/c not blowing cold, no check engine lights, works and runs as it should. 

720
1985 GMC C7000 Truck, VIN # 1GDS7D4EXFV617527
Year: 1985
Make: GMC
Model: C7000
Vehicle Type: Truck
Mileage: 130'502
Plate:
Body Type: Medium Conventional Cab & Chassis
Trim Level:
Drive Line: 6x4
Engine Type: V8, 7.0L (427 CID)
Fuel Type: Gasoline
Horsepower:
Transmission: Automatic 
VIN #: 1GDS7D4EXFV617527

Features and Notes: Gas engine was replaced 70k miles ago, air brakes, PTO, diff lock, runs and drives, was driven to the auction, will need tires, dump box is 7' 6'' wide x 11' long.   

721
2004 Chevrolet Tahoe Multipurpose Vehicle (MPV), VIN # 1GNEK13Z44R219648
Year: 2004
Make: Chevrolet
Model: Tahoe
Vehicle Type: Multipurpose Vehicle (MPV)
Mileage: 211'396
Plate:
Body Type: 4 Door Wagon
Trim Level: LS; LT; Z71
Drive Line: 4WD
Engine Type: V8, 5.3L; FFV
Fuel Type: Gasoline/E85
Horsepower:
Transmission: Automatic
VIN #: 1GNEK13Z44R219648

Features and Notes:  It has a 5.3 Liter Vortec V-8, auto transmission, push button 4-wheel drive, sunroof, heated leather interior, 3rd row seating that sits 7, power windows, power locks, power mirrors, power seat, tow package and much more, check engine light on for O2 sensor and tire pressure monitor light.   Runs and drives as it should.   

722
1999 Chevrolet Blazer Multipurpose Vehicle (MPV), VIN # 1GNDT13W6X2170867
Year: 1999
Make: Chevrolet
Model: Blazer
Vehicle Type: Multipurpose Vehicle (MPV)
Mileage: 118'000
Plate:
Body Type: 4 Door Wagon
Trim Level: Base; LS; LT
Drive Line: 4WD
Engine Type: V6, 4.3L; 90 deg.; CPI
Fuel Type: Gasoline
Horsepower:
Transmission: Automatic 
VIN #: 1GNDT13W6X2170867

Features and Notes: This SUV has had the same owner since 2002 and was Grandma driven. It has a 4.3 Liter Voortec V-6, auto transmission, push button 4-wheel drive, 4-door that seats 5, very clean body, power windows, power locks, power mirrors, check engine light is on.   

723
2001 Ford F-250 Pickup Truck, VIN # 1FTNX21F91EC22802
Year: 2001
Make: Ford
Model: F-250
Vehicle Type: Pickup Truck
Mileage: 406'488
Plate:
Body Type: 4 Door Cab; Super Cab
Trim Level: XL; XLT; Lariat
Drive Line: 4WD
Engine Type: V8, 7.3L; OHV 16V; Turbo
Fuel Type: Diesel
Horsepower: 215-235HP
Transmission: Automatic 
VIN #: 1FTNX21F91EC22802

Features and Notes: It has an extended cab, 7' wide x 6 1/2' long flat bed, trailer hitch, power windows, trailer hitch, good tires, 4x4 not currently working.  Check oil light is on and power steering is not working. 

724
1993 Ford Ranger Pickup Truck, VIN # 1FTDR15X4PTA36821
Year: 1993
Make: Ford
Model: Ranger
Vehicle Type: Pickup Truck
Mileage: 41'783 (Rolled Over)
Plate:
Body Type: 2 Door Cab; Super Cab
Trim Level: STX; XL; XLT; Splash
Drive Line: 4WD
Engine Type: V6, 4.0L (244 CID); OHV 12V; EFI
Fuel Type: Gasoline
Horsepower:
Transmission: Manual
VIN #: 1FTDR15X4PTA36821

Features and Notes:m Good running Ford Ranger with 4-wheel drive, and has an extended cab.  It also has oversize 31x10.5-15 Goodyear Wrangler Tires, and a brushguard. 

750
2010 Pro-Track Gooseneck Trailer 8' X27'
2010 Pro-Track Gooseneck Trailer 8' X27' with 5' dove tail and folding ramps.  It has dual tires on 10'000 lb dual axles, 48" tool box, new lights, new decking, fresh paint, good tires, sells with title. VIN: 5BNDG3226AW000159

752
2016 48' Aluminum Flatbed Trailer
2016 48' Aluminum Flatbed Trailer by Direct Trailers.   It has a universal moffett truck attachment on the back, headache rack, straps, sliding rear axel, in good condition.   Tires are at about 25%.   VIN: 5UJFC4822GW002833
Model Number: DT48CFTWSA-RAS-LH-G

754
Storage Van Trailer
Storage Van Trailer, for storage only.   Does not have a title and sells with a bill of sale only. It is 48' long and tires are at or below 10%.  Manufactured by Strick Corp and was built in 1989

755
Storage Van Trailer
Storage Van Trailer, for storage only. Does not have a title and sells with a bill of sale only. It is 48' long and tires are at or below 10%. Manufactured by Monon corporation and was built in 1987.

756
1984 Eager Beaver Lowboy Detach Trailer
1984 Eager Beaver Lowboy Detach Trailer,  Needs new decking, has decent tires, detatch is powered by a 11.5 horsepower Briggs and Stratton engine that is in unknown working condition, it was brought to the auction on a step deck trailer and is not deemed to be road worthy. 
VIN: 112HGB201ET350110 

757
Utility Trailer
Utility Trailer that is 6' 6'' wide ad 8' long, It is a single axle, pulls with a 2'' ball, has a jack, light need some work and sells with a bill of sale only. 

758
Enclosed Trailer 7' X 18'
Enclosed Trailer that is 7' X 18' and has double door on both the front and back,  It is a tandem axle, pulls with 2" ball, has a jack, solid floor, sells with a title. 

759
2020 Formula Cargo Trailer 8'X 18'
2020 Formula Cargo Trailer that is 8' X 18'.  It has tandem 6- lug axles, LED lights, ramp rear door, curb side man door, pulls with 2 5/16" ball, has brakes, damage on right rear, front left and right, paint damage on inside.  Sells with bill of sale only. 

760
5' X 10' Utility Trailer
5' X 10' Utility Trailer with drive on ramp, pulls, with 2" ball and has a jack, It does have a bent tongue, bent axle with one new tire. Sells with bill of sale only. 

761
12' Aluminum John Boat on Trailer
12' Aluminum John Boat on Trailer, It has 2 seats, oars, trailer pulls with a 2'' ball and has a jack, sells with bill of sale only. 

762
13' Aluminum John Boat on Trailer
13' Aluminum John Boat on Trailer, It has 3 seats, 12 volt trolling motor.  It is powered by a vintage Mercury 5 hp outboard engine, the running condition is unknown, does have good compression, on a trailer that does includes a winch and a jack and pulls with a 2'' ball. 
Bill of sale only. 

763
11' Aluminum John Boat on Trailer
11' Aluminum John Boat on a trailer and is powered by a 9.9 hp Evinrude outboard engine, and has a 12 volt trolling motor.  The running condition is unknown, does have good compression, trailer includes a winch and a jack, pulls with a 1 7/8" ball.   Bill of sale only. 

764
Car Dolly
Car Dolly, pulls with a 2" ball, needs a new coupler, does not include straps or lights, has good tires, sells with a bill of sale only. 

765
Surveyor SV291 Camper
Surveyor SV291 Camper by Forrest River.  It has a queen bed in front full bed in the back with a bunk above it.   The dinette converts into a bed and the sofa folds down for more sleeping space as well.   It has a full bathroom, full kitchen including a LP stove and oven, microwave, double sink, full fridge and freezer.   The out side has an awning, folding steps, leveling jacks, 2 LP tanks, power jack and it pulls with a 2 5/16'' ball.  The floor does feel soft. 

766
Wooden Jon Boat 12'
Wooden Jon Boat 12' in good condition.   It sells with 2 sets of oars, 2 life jackets, and a 2 HP Johnson Sea-Horse outboard motor that is in unknown running condition but has good compression.  Sells with bill of sale only. 

767
6' X 10' Utility Trailer
6' X 10' Utility Trailer, It is a single axle with a tilt bed and has good decking, It does include a jack, pulls with a 2'' ball.  It will need new lens on the lights. Sells with a title.   VIN: 4ASTS1011WS002649

768
6' x 10'6'' Equipment Trailer
6' x 10'6'' Equipment Trailer, It is a tandem axle, has 3' drive on ramps, pulls with a 2 5/16'' ball and has a jack.   It does not have lights and the tires are worn.  Sells with a bill of sale only. 

769
2009 Gator Made Deck Over Trailer
2009 Gator Made Deck Over Trailer.  It is 8' X 16' with a 4' dovetail and 4' drive on ramps. It is a tri-axle with brakes and has good tires, pintle style hitch, a new pig tail for the lights and is in good condition.   VIN: 4Z1PB25209S008001   Sells with bill of sale only.

770
7' x 16' Equipment Trailer
7' x 16' Equipment Trailer with a 2' dovetail and 5' drive on ramps. It is a a tandem axle with 8-lug wheels, pulls with a 2 5/16'' ball, has brakes,  a GVW of 12'000 lbs.   
VIN: 1VK500H2751053416

771
Karavan Trailer
Karavan Trailer, 5' X 8' with a tilt deck and a diamond plate toolbox.  It does have new lights and wiring, pulls with a 1 7/8'' ball.  Sells with bill of sale only. 

772
New 2021 Karavan Utility Trailer
New 2021 Karavan Utility Trailer.  It is 82" wide X 12' long and has a 1' dove tail and 4' drive on ramp.   It is a single axle and pulls with a 2'' ball and includes, LED lights, jack, removable and adjustable side rails, tie dow storage in fenders.   This Trailer has only been used twice.  Model KTS-2990-82-13-DT   VIN: 5KTUS1713MF589218

773
Eager Beaver Tri Axle Equipment Trailer
Eager Beaver Tri Axel Equipment Trailer, It is 8 /12' wide and 20' long with the dovetail and has 4' folding ramps, does need tires, lights and brakes are in unknown working condition.   1985 model. 

774
2011 Cargo Express 8' x 20' Enclosed V-Nose Trailer
2011 Cargo Express 8' x 20' Enclosed V-Nose Trailer with ramp rear door, curb side man door, tandem axle with brakes, includes a spare tire, tie down anchors throughout, pulls with 2 5/16" ball.

VIN: 40L1C2020BP900071

775
Equipment Trailer With Ramps
Equipment Trailer With Ramps, It is 6 1/2' wide, 16' long, tandem axle and has 5' folding ramps.   

776
Sea-Nymph Fishing Boat and Trailer
Sea-Nymph Fishing Boat and Trailer,   It is a 14' aluminum fishing boat powered by a 25 HP Mercury outboard motor and has a Motorguide trolling motor that has 46 lbs of thrust.   It also comes with a Humming bird fish finder, live well and a hand winch on the trailer.    The trailer sells with a title and the boat will have a bill of sale.  

777
2011 Elite Gooseneck Trailer
2011 Elite Gooseneck Trailer, It is 8' wide x 20' long with a 5' dovetail and 4 1/2' folding drive on ramps.  The ramp mounts have been moved from original position. The GVWR is 22'500 lbs and has decent tires, brakes and deck.   

778
2000 PJ Trailers Equipment Trailer
2000 PJ Trailers Equipment Trailer.  It is 7' wide x 21' long with a 3' dove tail and 5' drive on ramps. It is a Tri-axle and has (2) 42'' wide Knack job boxes mounted to either side, pintle hitch, needs decking, brake condition is unknown. 

779
1995 Econoline Equipment Trailer
1995 Econoline Equipment Trailer.  It is 8' wide x 18' long with a 5' dove tail and 5' drive on ramps,  It has dual tires on tandem axles with 1 wheel on either side of the suspension springs. It has a 24 ton weight capacity, pintle hitch, brakes are in unknown condition, needs new decking. 

780
2015 Belshe Equipment Trailer
2015 Belshe Equipment Trailer, It is 8 1/2' wide x 21' long plus a 6' dove tail and 7' drive on ramps.   It is a tandem axel with dually tires on each and has a pintle style hitch, good tires, good decking, air brakes are backed off because of a bad splitter valve, GVWR 25'500 lbs.  VIN: 16JF02129F1048076

781
5' x 8' Utility Trailer
5' x 8' Utility Trailer with a tilt deck.  It also includes a jack and 2' sides.   Sells with bill of sale only. 

782
4' x 8' Utility Trailer
4' x 8' Utility Trailer with a 4' x 4' ramp, pulls with 2'' ball.  Sells with Bill of Sale only 
 

783
4' x 10' Utility Trailer
4' x 10' Utility Trailer with a steel wire mesh floor. It includes a jack and pulls with a 2'' ball and it needs lights.   Sells with a bill of sale only. 

784
Sunfish Sailboat
Sunfish Sailboat, approximately 13' long, with mast, no sail, sells with bill of sale only. 

785
Aluminum Fishing Boat & Trailer
Aluminum Fishing Boat & Trailer,   boat is 14' long, has 3 bench seats, Shakespear 12 volt trolling motor, oars, boat cover included, Titles for both trailer and boat. 

786
Tri Axle Equipment Trailer
Tri Axle Equipment Trailer, 9 ton capacity, it is 78" wide x 16' long with folding 4 1/2' ramps, has a toolbox, draw bar style hitch, and draw bar on rear to pull tandem, will need lights,    has title

787
2010 Griffin Dump Trailer
2010 Griffin Dump Trailer  It is 7' wide x 14' long and includes removable ramps, New 7'000 lb tandem 8-lug axles, pulls with a 2 5/16" ball and has a good floor, pulls and operates as it should.  1 owner unit, 
VIN: 4C9BU1429AE020288

788
Truck Flat Bed
Truck Flat Bed, 8' wide x 24' long, 42" high headache rack. 

789
1997 Haulmark 30' Enclosed Gooseneck Trailer
1997 Haulmark 30' Enclosed Gooseneck Trailer, It is 8 1/2' wide x 30' long plus 8' long on top.   It has an interior height of 8' has e-track throughout and tie down points.   It comes with a ramp rear door and curb side man door, It is a tri-axle with 8-lug wheels and good brakes, It also includes items on inside to convert to a camper or toy hauler. 

790
2006 Cargo Express Enclosed Trailer
2006 Cargo Express Enclosed Trailer,   It is 7' wide x 16' long plus v-nose,   It has double rear doors, curb side man door, tandem 8-lug axles, brakes, LED lights, pulls with 2 5/16" ball and a jack.  It has also been a 1-Owner unit.   VIN: 4U01C16246A028447

791
7' X 12' Flatbed Trailer
7' X 12' Flatbed Trailer that sits on tandem 6-lug axles and has brakes, RAM tongue jack, good decking and pulls with a 2 5/16''ball.   VIN: MVIN316868IND

800
Tomahawk 96" Snow/Mulch Bucket

For year-round versatility, there is no better attachment for your skid steer than a Tomahawk 96" Snow/Mulch Bucket. Constructed from high-tensile steel, this bucket has high sides for maximum capacity and a rolled rear bottom for added strength and easier cleanup. The Tomahawk 96" Snow/Mulch Bucket easily scoops up and moves dirt, mulch, snow, gravel and more!

  • 1/8" Grade 50 High-Tensile Steel construction
  • 1/2" x 6" cutting edge 
  • 1.28 Cubic Yard Capacity
  • 96" Wide

801
Tomahawk 90" Snow/Mulch Bucket

For year-round versatility, there is no better attachment for your skid steer than a Tomahawk 90" Snow/Mulch Bucket. Constructed from high-tensile steel, this bucket has high sides for maximum capacity and a rolled rear bottom for added strength and easier cleanup. The Tomahawk 90" Snow/Mulch Bucket easily scoops up and moves dirt, mulch, snow, gravel and more!

  • 1/8" Grade 50 High-Tensile Steel construction
  • 1/2" x 6" cutting edge 
  • 1.2 Cubic Yard Capacity
  • 90" Wide

802
Tomahawk 84" Snow/Mulch Bucket

For year-round versatility, there is no better attachment for your skid steer than a Tomahawk 84" Snow/Mulch Bucket. Constructed from high-tensile steel, this bucket has high sides for maximum capacity and a rolled rear bottom for added strength and easier cleanup. The Tomahawk 84" Snow/Mulch Bucket easily scoops up and moves dirt, mulch, snow, gravel and more!

  • 1/8" Grade 50 High-Tensile Steel construction
  • 1/2" x 6" cutting edge 
  • 1.12 Cubic Yard Capacity
  • 84" Wide

803
Tomahawk 78" Snow/Mulch Bucket

For year-round versatility, there is no better attachment for your skid steer than a Tomahawk 78" Snow/Mulch Bucket. Constructed from high-tensile steel, this bucket has high sides for maximum capacity and a rolled rear bottom for added strength and easier cleanup. The Tomahawk 78" Snow/Mulch Bucket easily scoops up and moves dirt, mulch, snow, gravel and more!

  • 1/8" Grade 50 High-Tensile Steel construction
  • 1/2" x 6" cutting edge 
  • 1.0 Cubic Yard Capacity
  • 78" Wide

804
Tomahawk 72" Snow/Mulch Bucket

For year-round versatility, there is no better attachment for your skid steer than a Tomahawk 72" Snow/Mulch Bucket. Constructed from high-tensile steel, this bucket has high sides for maximum capacity and a rolled rear bottom for added strength and easier cleanup. The Tomahawk 72" Snow/Mulch Bucket easily scoops up and moves dirt, mulch, snow, gravel and more!

  • 1/8" Grade 50 High-Tensile Steel construction
  • 1/2" x 6" cutting edge 
  • 0.95 Cubic Yard Capacity
  • 72" Wide

805
Tomahawk 66" Snow/Mulch Bucket

For year-round versatility, there is no better attachment for your skid steer than a Tomahawk 66" Snow/Mulch Bucket. Constructed from high-tensile steel, this bucket has high sides for maximum capacity and a rolled rear bottom for added strength and easier cleanup. The Tomahawk 66" Snow/Mulch Bucket easily scoops up and moves dirt, mulch, snow, gravel and more!

  • 1/8" Grade 50 High-Tensile Steel construction
  • 1/2" x 6" cutting edge 
  • 0.87 Cubic Yard Capacity
  • 66" Wide

806
Tomahawk 60" Snow/Mulch Bucket

For year-round versatility, there is no better attachment for your skid steer than a Tomahawk 60" Snow/Mulch Bucket. Constructed from high-tensile steel, this bucket has high sides for maximum capacity and a rolled rear bottom for added strength and easier cleanup. The Tomahawk 60" Snow/Mulch Bucket easily scoops up and moves dirt, mulch, snow, gravel and more!

  • 1/8" Grade 50 High-Tensile Steel construction
  • 1/2" x 6" Cutting Edge
  • 0.8 Cubic Yard Capacity
  • 60" Wide

807
Tomahawk 84" Smooth Bucket

Need a better bucket for your skid steer? The general purpose Tomahawk 84" Smooth Bucket features a longer bottom than industry standard for better visibility. The rolled rear bottom adds strength and makes clean-up easier, while the wide 6" cutting edge ensures years of reliable performance. If you need a bucket for your skid steer, then the Tomahawk 84" Smooth Bucket is the obvious choice!

  • 1/2" x 6" Cutting Edge
  • 3/16" Wrap
  • 0.60 Cubic Yard Capacity
  • 84" Wide

808
Tomahawk 78" Smooth Bucket

Need a better bucket for your skid steer? The general purpose Tomahawk 78" Smooth Bucket features a longer bottom than the industry standard for better visibility. The rolled rear bottom adds strength and makes clean-up easier, while the wide 6" cutting edge ensures years of reliable performance. If you need a bucket for your skid steer, then the Tomahawk 78" Smooth Bucket is the obvious choice!

  • 1/2" x 6" Cutting Edge
  • 3/16" Wrap
  • 0.56 Cubic Yard Capacity
  • 78" Wide

809
Tomahawk 72" Smooth Bucket

Need a better bucket for your skid steer? The general purpose Tomahawk 72" Smooth Bucket features a longer bottom than industry standard for better visibility. The rolled rear bottom adds strength and makes clean-up easier, while the wide 6" cutting edge ensures years of reliable performance. If you need a bucket for your skid steer, then the Tomahawk 72" Smooth Bucket is the obvious choice!

  • 1/2" x 6" Cutting Edge
  • 10-Gauge Wrap
  • 0.5 Cubic Yard Capacity
  • 72" Wide

810
Tomahawk 66" Smooth Bucket

Need a better bucket for your skid steer? The general purpose Tomahawk 66" Smooth Bucket features a longer bottom than industry standard for better visibility. The rolled rear bottom adds strength and makes clean-up easier, while the wide 6” cutting edge ensures years of reliable performance. If you need a bucket for your skid steer, then the Tomahawk 66" Smooth Bucket is the obvious choice!

  • 1/2" x 6" Cutting Edge
  • 10-Gauge Wrap
  • 0.46 Cubic Yard Capacity
  • 66" Wide

811
Tomahawk 60" Smooth Bucket

Need a better bucket for your skid steer? The general purpose Tomahawk 60" Smooth Bucket features a longer bottom than industry standard for better visibility. The rolled rear bottom adds strength and makes clean-up easier, while the wide 6” cutting edge ensures years of reliable performance. If you need a bucket for your skid steer, then the Tomahawk 60" Smooth Bucket is the obvious choice!

  • 1/2" x 6" Cutting Edge
  • 10-Gauge Wrap
  • 0.4 Cubic Yard Capacity
  • 60" Wide

812
Tomahawk 78" HD Two-Cylinder Brush Grapple

If you need to move around brush or small logs, then the Tomahawk 78" HD Two-Cylinder Brush Grapple is the perfect attachment for your skid steer. This heavy-duty brush grapple is made from tough 1/2" steel and comes with dual top clamps for irregular-sized loads. The Tomahawk 78" HD Two-Cylinder Brush Grapple allows you to quickly and easily clear brush and other debris from a jobsite. Brush doesn’t stand a chance against this fearsome skid steer attachment!

  • 1/2" All-Steel Construction
  • Dual Top Clamps for irregular-sized loads
  • Dual Cylinder Covers
  • 78" Wide

813
Tomahawk 72" HD Two-Cylinder Brush Grapple

If you need to move around brush or small logs, then the Tomahawk 72" HD Two-Cylinder Brush Grapple is the perfect attachment for your skid steer. This heavy-duty brush grapple is made from tough 1/2" steel and comes with dual top clamps for irregular-sized loads. The Tomahawk 72" HD Two-Cylinder Brush Grapple allows you to quickly and easily clear brush and other debris from a job site. Brush doesn’t stand a chance against this fearsome skid steer attachment!

  • 1/2" All-Steel Construction
  • Dual Top Clamps for irregular-sized loads
  • Dual Cylinder Covers
  • 72" Wide

814
Tomahawk 66" Two-Cylinder Brush Grapple

Save time and effort when clearing brush with the Tomahawk 66” Two-Cylinder Brush Grapple. Constructed from 3/8” steel, this brush grapple makes an easy meal out of troublesome debris. The dual top clamps make the Tomahawk 66” Two-Cylinder Brush Grapple the perfect skid steer attachment for moving around irregularly-shaped loads.

  • 3/8" All-Steel Construction
  • Dual Top Clamps for irregularly-shaped loads
  • Dual Cylinder Covers
  • 66" Wide

815
Tomahawk 66" One-Cylinder Brush Grapple

Clear brush quickly and easily with the rugged Tomahawk 66” One-Cylinder Brush Grapple. Constructed from 3/8” steel, this brush grapple is perfect for moving around troublesome debris.

  • 3/8" All-Steel Construction
  • 3/8" Single Top Clamp
  • Cylinder Cover
  • 66" Wide

816
Tomahawk 66" One-Cylinder Grapple Bucket

Scoop up and secure your load easily with the Tomahawk 66” One-Cylinder Grapple Bucket. Featuring our rolled rear bottom for extra strength and cleanup, this grapple bucket has a tough cutting edge and powerful clamping action. The Tomahawk 66” One-Cylinder Grapple Bucket makes it easy to clamp down on debris and move it around with your skid steer.

  • 10-gauge Steel wrap
  • 1/2" x 6" Cutting Edge
  • 3/8" Top Clamp 
  • Cylinder Cover
  • 66" Wide

817
Tomahawk 72" Rock Bucket Grapple

Built from high-strength steel, the Tomahawk 72" Rock Bucket Grapple is perfect for collecting and securing small rocks and other large debris while allowing dirt to sift through. The grapple allows you to lock materials in place, quickly clearing difficult areas. The Tomahawk 72" Rock Bucket Grapple is tough enough to handle virtually any job you throw at it!

  • 1/4" Grade 50 High Tensile Steel Teeth
  • Cylinder Cover
  • 3/8" Top Clamp

818
Tomahawk 72" Rock Bucket

Clear rocks quickly and easily with our rugged Tomahawk 72" Rock Bucket! Constructed from high-tensile strength, grade 50 steel, our Tomahawk 72" Rock Bucket is built to last. The big teeth can easily rip into the earth, lifting rocks and other debris from the soil. Dirt and smaller objects easily fall through the slotted back and bottom.

  • 1/4" Teeth
  • Grade 50 High-Tensile Steel
  • 72" Wide

819
Tomahawk 66" Rock Bucket

Clear rocks quickly and easily with our rugged Tomahawk 66" Rock Bucket! Constructed from high-tensile strength, grade 50 steel, our Tomahawk 66" Rock Bucket is built to last. The big teeth can easily rip into the earth, lifting rocks and other debris from the soil. Dirt and smaller objects easily fall through the slotted back and bottom.

  • 1/4" Teeth
  • Grade 50 High-Tensile Steel
  • 66" Wide
  • 72" shown in picture

820
Tomahawk Fork Frame w/48" Forks

Add versatility to your skid steer with the Tomahawk Fork Frame w/Forks. Equipped with 48" class II forks, you can easily move around palletized materials. The high-visibility, see-through frame is ideal for operators.

  • 45 1/2" Wide
  • 35 1/2" Tall
  • 48" Class II Forks
  • High Visibility See Through Frame
  • 2800 lb. Weight Rating

821
Tomahawk Fork Frame w/42" Forks

Add versatility to your skid steer with the Tomahawk Fork Frame w/Forks. Equipped with 42" class II forks, you can easily move around palletized materials. The high-visibility, see-through frame is ideal for operators.

  • 45 1/2" Wide
  • 35 1/2" Tall
  • 42" Class II Forks
  • High Visibility See Through Frame
  • 2800 lb. Weight Rating

822
Tomahawk Fork Frame

Add versatility to your skid steer with the Tomahawk Fork Frame. By adding your own forks, you can easily move around palletized materials. The high-visibility, see-through frame is ideal for operators.

  • 45 1/2" wide
  • 35 1/2" tall
  • High Visibility See Through Frame

823
Tomahawk Round Bale Hay Spear Frame

If you live or work on a farm, then you probably know how difficult it can be to move round hay bales. Make that job easier with the Tomahawk Round Bale Hay Spear Frame. The long removable main spear and two removable bottom stabilizing spears allow your skid steer to easily pick up large round bales. The sturdy tubular steel frame is built for years of use. We think you’ll find the Tomahawk Round Bale Hay Spear Frame an indispensable attachment for your skid steer!

  • 1/4"x3"x3" Tubular Steel Frame
  • 49" Removable Main Spear
  • Two 18" Removable Bottom Stabilizing Spears
  • 1800 lb. Weight Rating

824
Tomahawk Square Bale Hay Spear Frame
If you live or work on a farm, then you probably know how difficult it can be to move large square hay bales. Make that job easier with the Tomahawk Square Bale Hay Spear Frame. The three long removable main spears allow your skid steer to easily pick up large square bales. The sturdy tubular steel frame is built for years of use. We think you’ll find the Tomahawk Square Bale Hay Spear Frame an indispensable attachment for your skid steer!
  • 1/4"x3"x3" Tubular Steel Frame 
  • 39" Removable Main Spears (3)
  • 1800 lb. Weight Rating

825
Tomahawk Thumb

The Tomahawk Thumb is the perfect attachment for your small excavator. It offers rigid support for materials when handling them in the bucket. The Tomahawk Thumb adds versatility to your excavator with a three-stage adjustable arm - allowing you to pick up and move objects like never before!

  • 3/8" Material
  • 3-Stage Adjustable Arm

826
Tomahawk Stump Bucket

Having trouble getting those pesky stumps out of the ground? Then the Tomahawk Stump Bucket is the perfect solution! Features four 7/8" thick teeth a 3/8" serrated edge to dig deep and rip those tough roots out of the ground.

  • 7/8" Thick Teeth (4)
  • 1/2" x 6" Cutting Edge
  • 3/8" Serrated Edge
  • 3/16" Wrap

827
Tomahawk Universal Mount Plate

Easily welds to your existing attachment and will allow you to use non-universal attachments on skid steers with the Tomahawk Universal Mount Plate.

  • 3/16" all-steel construction
  • Fits all models of skid loaders

828
Tomahawk Tree Boom

Move trees around easily with the Tomahawk Tree Boom. This attachment is indispensable for landscapers, as it allows you to easily pick up, move and position old and new trees with your skid steer like never before! The Tomahawk Tree Boom is constructed from high-quality steel materials for years of reliable use.

  • 1/4" x 4" x 4" Tube
  • 1/4" Quick Attach Mount Plate
  • 1/2" Upper Hook Plate

829
Tomahawk Trailer Spotter

Move your trailers around easily with our Tomahawk Trailer Spotter. Constructed to withstand the most demanding jobs, this trailer spotter accepts a standard 2" receiver hitch.

  • 3/16" Mount Plate
  • 2-1/2" Square Tube, 3/16" Wall and 13" Long
  • Accepts 2" Receiver Hitch

830
Bradco 48" Pallet Forks
Bradco 48" Pallet Forks for quick attach on tractor loader, good condition with little use. 

831
John Deere MX7 Brush Mower
John Deere MX7 Brush Mower.  It is 7' wide, runs on 540 PTO and 3-point attach. In very good condition. 

832
John Deere Round Bale Spear Attachment
John Deere Round Bale Spear Attachment,  Quick attach for tractor loader,  

833
John Deere 7' 3-Point Rear Blade
John Deere 7' wide  3-Point Rear Blade model RB2084. In good condition. 

834
New Skid Steer Backhoe
New Skid Steer Backhoe with a 9'' wide 2 teeth bucket and stationary 12" thumb.   

835
New Skid Steer 12" Backhoe Bucket
New Skid Steer 12" Backhoe Bucket with 3 teeth

836
New Skid Steer 24" Backhoe Bucket
New Skid Steer 24" Backhoe Bucket with 4 teeth. 

837
New Greatbear Skid Steer Brush Mower
New Greatbear Skid Steer Brush Mower, 66'' wide cut, quick attach. 

838
New Greatbear Skid Steer Brush Mower
New Greatbear Skid Steer Brush Mower, 66'' wide cut, quick attach.

839
New Skid Steer Heavy Grass Fork Grapple
New Skid Steer Heavy Grass Fork Grapple, 76" wide, 8 tooth, 2 cylinder, new in crate 

840
New Skid Steer Heavy Grass Fork Grapple
New Skid Steer Heavy Grass Fork Grapple, 76" wide, 8 tooth, 2 cylinder, new in crate

841
New Skid Steer Heavy Grass Fork Grapple
New Skid Steer Heavy Grass Fork Grapple, 76" wide, 8 tooth, 2 cylinder, new in crate

842
New Skid Steer Auger Attachment
New Skid Steer Auger Attachment with 3 bits, 19'', 14'' and 11'' new in crate,

843
New Skid Steer Auger Attachment
New Skid Steer Auger Attachment with 3 bits, 19'', 14'' and 11'' new in crate,

844
New Skid Steer Trencher Attachment
New Skid Steer Trencher Attachment, Approximately 4' long arm, auger side discharge, new in crate

845
New Skid Steer 72" Rock Grapple Bucket
New Skid Steer 72'' Rock Grapple Bucket, 2-cylinder, 

846
New Skid Steer Vibratory Roller Attachment
New Skid Steer Vibratory Roller Attachment, 72" wide, not for high flow hydraulics, 

847
New Skid Steer Vibratory Roller Attachment
New Skid Steer Vibratory Roller Attachment, 72" wide, not for high flow hydraulics,

848
New Skid Steer Snow Plow Attachment
New Skid Steer Snow Plow Attachment, 86" wide, 

849
New Skid Steer Rotary Cultivator Attachment
New Skid Steer Rotary Cultivator Attachment, 9 tines, 72'' wide working width, new in crate, 

850
Loader Bucket
Loader Bucket that fits a CAT 910 Wheel Loader.   It is 82'' wide and may fit other units also.   In useable condition. 

851
John Deere Roller Fairlead
Roller Fairlead for John Deere 4'000 Series winch

852
John Deere 72" Mower
John Deere 72'' rough cut mower,  540 PTO driven, 3-point lift, in good working condition.   Model 616. 

853
King Kutter 60" Mower
King Kutter 60" Mower, PTO driven and 3-point lift.  In working condition. 

854
Western V-Blade Snow Plow
Western V-Blade Snow Plow,  it is 8'6'' wide, ultra mount, MVP (multi position v plow)  In working condition. 

855
Western V-Blade Snow Plow
Western V-Blade Snow Plow, it is 8'6'' wide, uni-mount,  In working condition.

856
Skid Steer Snow Plow
Skid Steer Snow Plow,  It has a 4-way blade and is 9' wide and is in good working condition. 

857
Snow Ex Salt Spreader
Snow Ex Salt Spreader, model V Maxx 7550, still in working condition.  

858
3-Point Auger Attachment
3-Point Auger Attachment, does not include auger bit.   

859
Bobcat Skid Steer Dozer Blade
Bobcat Skid Steer Dozer Blade, It is 80'' wide and in good working condition and has been recently serviced by a Bobcat dealer.   Model: 80 Dozer    Serial Number 232111995

860
3-Point Finish Mower
3-Point Finish Mower, 72'' wide, 3-point lift and runs on 540 PTO, works but does need some new bearings. 

861
3-Point Snow Blower
3-Point Snow Blower, It is 78" wide, 2-stage augers, runs on 540 PTO and is in working condition. 

862
5' Brush Mower
5' Brush Mower, works good, blades could be sharpened, PTO shaft is 3 years old, 3-point lift.   

863
Skid Loader Forks
Skid Loader Forks,  home built and forks are 48'' long. 

864
Backhoe Bucket
Backhoe Bucket, 18'' wide 4-tooth, known to fit a Case backhoe unsure of model

865
Backhoe Bucket
Backhoe Bucket, 24'' wide 5-tooth, known to fit a Case backhoe unsure of model

865A
CAT Excavator Bucket
CAT Excavator Bucket, approximately 24" wide, 5-tooth with bolt on smooth edge.   Known to fit a CAT 307 SSR and will likely fit others as well. 

866
Set of Forks
Set of Forks  42'' long,  1 is bent.

867
New 40'' Skid Steer Spade Bucket
New 40'' Skid Steer Spade Bucket

867A
New 40'' Skid Steer Spade Bucket
New 40'' Skid Steer Spade Bucket

868
New 3/4 CY Concrete Placement Bucket

869
New 76" Single Cylinder Skeleton Grapple Bucket
New 76" Single Cylinder Skeleton Grapple Bucket

870
New 76" Single Cylinder Skeleton Grapple Bucket
New 76" Single Cylinder Skeleton Grapple Bucket

871
New Skid Steer 70" Root Rake
New Skid Steer 70" Root Rake

872
New Skid Steer Brush Mower

873
New Skid Steer Rock Bucket 84"
New Skid Steer Rock Bucket 84"

874
New Skid Steer Rock Bucket 78"
New Skid Steer Rock Bucket 78"

875
New Skid Steer Rock Bucket 74"
New Skid Steer Rock Bucket 74"

876
New Skid Steer Rock Bucket 68"
New Skid Steer Rock Bucket 68"

877
New Skid Steer Root Grapple 80"
New Skid Steer Root Grapple 80"

878
New Skid Steer Root Grapple 70"
New Skid Steer Root Grapple 70"

879
New Skid Steer Rock & Brush Grapple 84''
New Skid Steer Rock & Brush Grapple 84''

880
New Skid Steer Rock & Brush Grapple 78''
New Skid Steer Rock & Brush Grapple 78''

881
New Skid Steer Rock & Brush Grapple 74''
New Skid Steer Rock & Brush Grapple 74''

882
New Skid Steer Rock & Brush Grapple 68''
New Skid Steer Rock & Brush Grapple 68''

883
New Skid Steer Attach Frame

884
New Skid Steer Attach Frame

885
New Skid Steer Attach Frame

886
New Skid Steer Attach Frame

887
New Skid Steer Attach Frame

888
New Skid Steer Attach Frame

889
New Skid Steer Attach Frame

890
New Skid Steer Attach Frame

891
New Skid Steer Attach Frame

892
New Skid Steer Attach Frame

893
New Skid Steer Attach Frame

894
New Skid Steer Attach Frame

895
New Skid Steer Snow Pusher 8'
New Skid Steer Snow Pusher 8'

896
New Skid Steer Snow Pusher 6'
New Skid Steer Snow Pusher 6'

897
New 72" Class 2 Fork Lift Fork Set of 2, 5500lb Cap Per Fork
New 72" Class 2 Fork Lift Fork Set of 2, 5500lb Cap Per Fork

898
New 84" Light Duty Fork Extensions
New 84" Light Duty Fork Extensions

899
New 84" Light Duty Fork Extensions
New 84" Light Duty Fork Extensions

900
New Skid Steer Plate With Guard

901
New Skid Steer Plate With Guard

902
New Skid Steer Plate With Guard

903
New Fork Frame 48" For Skid Steer
New Fork Frame 48" For Skid Steer

904
New Fork Frame 48" For Skid Steer
New Fork Frame 48" For Skid Steer

905
New Fork Frame 48" For Skid Steer
New Fork Frame 48" For Skid Steer

906
New Fork Frame 48" For Skid Steer
New Fork Frame 48" For Skid Steer

907
New Skid Steer 76" Skeleton Bucket High Sides
New Skid Steer 76" Skeleton Bucket High Sides

908
New Skid Steer 76" Skeleton Bucket High Sides
New Skid Steer 76" Skeleton Bucket High Sides

909
New Skid Steer 72" Bucket With Teeth
New Skid Steer 72" Bucket With Teeth

910
New Skid Steer 72" Bucket With Teeth
New Skid Steer 72" Bucket With Teeth

911
New Skid Steer 78" Bucket With Blade
New Skid Steer 78" Bucket With Blade

912
New Skid Steer 78" Bucket With Blade
New Skid Steer 78" Bucket With Blade

913
New Skid Steer 66" Bucket With Blade
New Skid Steer 66" Bucket With Blade

914
New Skid Steer 66" Bucket With Blade
New Skid Steer 66" Bucket With Blade

915
New Skid Steer 90" Snow Bucket
New Skid Steer 90" Snow Bucket

916
New Skid Steer 90" Snow Bucket
New Skid Steer 90" Snow Bucket

917
New Skid Steer 78" Single Cylinder Grapple Bucket
New Skid Steer 78" Single Cylinder Grapple Bucket

918
New Skid Steer 78" Single Cylinder Grapple Bucket
New Skid Steer 78" Single Cylinder Grapple Bucket

919
New Skid Steer Quick Attach Plate

920
New Skid Steer Quick Attach Plate

921
New Skid Steer Quick Attach Plate

922
New Skid Steer Quick Attach Plate

923
New Skid Steer Quick Attach Plate

924
New Skid Steer Quick Attach Plate

925
New Skid Steer Quick Attach Plate

926
New Skid Steer Quick Attach Plate

927
New Pallet Fork Extensions Light Duty

928
New Pallet Fork Extensions Light Duty

929
New Skid Steer Receiver Hitch Trailer Mover

930
New Skid Steer Receiver Hitch Trailer Mover

931
Skid Steer Power Broom
Skid Steer Power Broom, 68" wide, good bristles, needs chain.

932
3-Point Disc
3-Point Disc, 72'' wide appears to be in decent condition. 

933
Rotary Hoe
Rotary Hoe that is 14'6'' wide and attaches with 3-point hitch. 

934
V-Blade
V-blade is approximately 8' wide unknown fitment 

Gallery Images Loading, Please Wait...
  • Home
  • Hire an Auction Company
  • Add Your Auction Company
  • Member Login
  • Contact Us
  • Desktop Site
Return
Equipment Showcase Auction
 Live Auction
 
Auction Date(s)
Thursday Jul 1, 2021 Completed
Auction Location

Middlebury, IN 46540
Company
Bright Star Realty and Auctions, INC

Contact: Loren Beachy
Phone: 574-825-0704
Website: brightstarauctions.com

Listing Terms and Conditions

Cash, check, or major credit card(with 2% con. fee). 10% buyers premium applies to onsite bidders. 13% buyers premium online , 7% sales tax will be in effect , buyers are welcome to fill out a valid exemption. All items are sold without reserve. 

Bidder Terms and Conditions

These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer.
 
  1. Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
 
  1. Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded, where required, as follows:
IN, IL , WI , KY , OH , VA , AR , NY, NC, TN, MO .
 
  1. Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer: “Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction. “Absentee Bidder” means a person or entity that submits an Absentee Bid.
“Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION.
“Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids.
“Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected and where a Buyer may pick up Personal Property.

“Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder.

“Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms.

“Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer.
"Buyer" means the Winning Bidder with respect to each Lot of Personal Property or of each parcel of Real Property.
"Buyer's Premium" is an amount with respect to each Lot of Personal Property or with respect to each parcel of Real Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account. For Real Property offered Subject to Seller’s Confirmation, the Buyer’s Premium will be calculated on the amount of the High Bid Subject to Confirmation.

“Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property or Real Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation.

“Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer.

“High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot or on a parcel of Real Property.

“High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on Real Property put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price.
 
“High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot or a parcel of Real Property.

"Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event.

“Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer.

“No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale.

“Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions.

“Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online.

"Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered.

“Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers.

“Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer).

“Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms- length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction.

“Property” means the Real Property and the Personal Property.

“Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium. "Registered Bidder" means a person or entity that has registered to bid at the Auction.

“Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction.
“Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE.

“Reserve Price” means the minimum price that Seller is willing to accept for specific Property.

“Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer.

“Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid.

“Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by
Seller).

"Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid.

“Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction.

“Without Reserve” means Absolute.
 
 
  1. Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.
 
  1. Auction Conducted in the State of Indiana.
 
    1. For Auctions in the State of Indiana and Online. All Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are entered into in the State of Indiana, all bids and payments are received in the State of Indiana, and the Realty Purchase Agreement, if any, will be formed and entered into in the State of Indiana.
    2. For Auctions outside of the State of Indiana. All Property is offered for sale in the state of the Auction Site, and will be sold in the state of the Auction Site. Notwithstanding the physical location of any Bidder or any Participant, these Terms are entered into in the state of the Auction Site, all bids and payments are received in the state of the Auction Site, and the Realty Purchase Agreement, if any, will be formed and entered into in the state of the Auction Site.
 
  1. Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.

The Buyer’s Premium for Personal Property will be amount equal to thirteen percent ( 13%) of the Hammer Price for each Lot Knocked Down at the Auction.

The Buyer’s Premium for Real Property will be amount equal to percent ( %) of the Hammer Price for each parcel of Real Property Knocked Down at the Auction.
 
  1. Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
  2. Nature of the Auction.

X The Auction for the Personal Property is an Absolute Auction.

The Auction for the Personal Property is With Reserve. Auctioneer may Withdraw any Lot offered With Reserve prior to the Fall of the Hammer.
 
  1. Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
 
  1. No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
 
  1. Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
 
    1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
 
    1. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
 
    1. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
 
    1. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
 
    1. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
 
    1. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
 
    1. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
 
    1. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.
 
    1. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties,
(i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
 
    1. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
 
    1. No Reduction or Retraction of Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.
 
    1. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.
 
    1. Online Bids. Online bids may not be reduced or retracted.
 
  1. Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). Absentee Bids may be initiated and advances in accordance with Auctioneer’s policies and procedures. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
 
  1. Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
 
  1. Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
 
  1.  
 
  1. Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
 
  1. Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot or item of Personal Property or each parcel of Real Property will be the Buyer of such Property.
 
  1. All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
 
  1. Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
 
  1. Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.
 
  1. Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or
representation by Auctioneer
 
  1. Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
  1.  
Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
 
  1. Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ring man, or multiple bid assistants or ring men, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
 
  1. Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the

vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
 
  1. All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
 
  1. Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked- Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
 
  1. Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases must be paid for within five (5) days after the close of the Auction. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.
 
  1. Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Disassembly and removal shall be done in a workmanlike manner, and each Buyer shall indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer's employees, agents, representatives, or independent contractors, in connection with the disassembly or removal of any Personal Property. Any and all damages to the Auction Site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller.
 
  1. Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them.
 
  1. Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.
 
  1. No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
 
  1. Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
 
  1. Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.




 
  1. Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled
to specific performance or other equitable relief.
 
  1. Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
 
  1. Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
 
  1. Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
 
  1. Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
 
  1. Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
 
  1. Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim, suit or cause of action relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
 
  1. Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their respective rights hereunder.

Equipment Showcase Auction
Skid loaders ~ Excavating~ Construction Equipment
At Absolute Auction!



Consign now
for FREE
advertising!
Consignments are
wanted including:
• Contractor’s Equipment
• Excavating Equipment
• Trailers
• Skid loaders
• Power Tools
 

00
Information Lot
No minimums, no reserves. Auction will begin at 9:00 AM. Live, phone, and online bidding available. Call Bronson with questions 574.210.3721. Loadout M-F from 8-4. 

01
Selling to Onsite Bidders only starting at 9 AM.
Brand new DeWalt, Makita, and Milwaukee tools, batteries etc.

82
AR 500 Steel Spinner Target 3/8"
AR 500 Steel Spinner Target 3/8"

83
AR 500 Steel Spinner Target 3/8"
AR 500 Steel Spinner Target 3/8"

84
AR 500 Steel Spinner Target 3/8"
AR 500 Steel Spinner Target 3/8"

85
New AR 500 Gong Target 3/8''
New AR 500 Gong Target 3/8''

86
New AR 500 Gong Target 3/8''
New AR 500 Gong Target 3/8''

87
New AR 500 Gong Target 3/8''
New AR 500 Gong Target 3/8''

88
New AR 500 Gong Target 3/8''
New AR 500 Gong Target 3/8''

89
New 3/8" AR 500 Steel Coyote Shooting Target With Heart Flapper
New 3/8" AR 500 Steel Coyote Shooting Target With Heart Flapper

90
New 3/8" AR 500 Steel Coyote Shooting Target With Heart Flapper
New 3/8" AR 500 Steel Coyote Shooting Target With Heart Flapper

91
New 3/8" AR 500 Steel Bear Shooting Target With Heart Flapper
New 3/8" AR 500 Steel Bear Shooting Target With Heart Flapper

92
New 3/8" AR 500 Steel Deer Shooting Target With Heart Flapper
New 3/8" AR 500 Steel Deer Shooting Target With Heart Flapper

93
New 3/8" AR 500 Steel Deer Shooting Target With Heart Flapper
New 3/8" AR 500 Steel Deer Shooting Target With Heart Flapper

94
New 30" x 57" Work Table Unfinished 5/16" Top
New 30" x 57" Work Table Unfinished 5/16" Top

95
New 30" x 57" Work Table Unfinished 5/16" Top
New 30" x 57" Work Table Unfinished 5/16" Top

96
New 30" x 57" Work Table Unfinished 5/16" Top
New 30" x 57" Work Table Unfinished 5/16" Top

97
New 30" x 57" Work Table Unfinished 5/16" Top
New 30" x 57" Work Table Unfinished 5/16" Top

98
New 30" x 57" Work Table Unfinished 5/16" Top
New 30" x 57" Work Table Unfinished 5/16" Top

99
New 30" x 57" Work Table Unfinished 5/16" Top
New 30" x 57" Work Table Unfinished 5/16" Top

100
New 30" x 57" Work Table Black 5/16" Top
New 30" x 57" Work Table Black 5/16" Top

101
New 30" x 57" Work Table Black 5/16" Top
New 30" x 57" Work Table Black 5/16" Top

102
New 30" x 57" Work Table Black 5/16" Top
New 30" x 57" Work Table Black 5/16" Top

103
New 30" x 57" Work Table Black 5/16" Top
New 30" x 57" Work Table Black 5/16" Top

104
New 30" x 57" Work Table Black 5/16" Top
New 30" x 57" Work Table Black 5/16" Top

105
New 30" x 57" Work Table Black 5/16" Top
New 30" x 57" Work Table Black 5/16" Top

106
New 26" x 60" Work Bench Black
New 26" x 60" Work Bench Black

107
New 26" x 60" Work Bench Black
New 26" x 60" Work Bench Black

108
New 26" x 60" Work Bench Black
New 26" x 60" Work Bench Black

109
New 26" x 60" Work Bench Black
New 26" x 60" Work Bench Black

110
New 26" x 60" Work Bench Black
New 26" x 60" Work Bench Black

111
New 26" x 60" Work Bench Black
New 26" x 60" Work Bench Black

165
Magnum 4000 Hot Water Pressure Washer
Magnum 4000 Hot Water Pressure Washer on wheels.   It has a 15 hp gas engine and a diesel powered hot water burner. It runs 3.5 GPM at 4'000 PSI. It has electric and recoil start, It is less that 1 year old and is in good working condition.

112
New 30" x 90" Steel Work Bench
New 30" x 90" Steel Work Bench

166
Pallet of Hoses
Pallet of Hoses, Gardend hoses and a high pressure hose.  

113
New 30" x 90" Steel Work Bench
New 30" x 90" Steel Work Bench

114
New 30" x 90" Steel Work Bench
New 30" x 90" Steel Work Bench

115
New 30" x 90" Steel Work Bench
New 30" x 90" Steel Work Bench

116
New 90" Cattle Feeder Orange
New 90" Cattle Feeder Orange

117
New 90" Cattle Feeder Orange
New 90" Cattle Feeder Orange

118
New 90" Cattle Feeder Orange
New 90" Cattle Feeder Orange

119
New 90" Cattle Feeder Orange
New 90" Cattle Feeder Orange

120
New 90" Cattle Feeder Orange
New 90" Cattle Feeder Orange

121
New 90" Cattle Feeder Orange
New 90" Cattle Feeder Orange

122
New 90" Cattle Feeder Green
New 90" Cattle Feeder Green

123
New 90" Cattle Feeder Green
New 90" Cattle Feeder Green

124
New 90" Cattle Feeder Green
New 90" Cattle Feeder Green

125
New 90" Cattle Feeder Green
New 90" Cattle Feeder Green

126
New 7 CY Telehandler Trash/Debris Container

127
New 2 YD Self Dumping Hopper With Fork Pockets

128
New 2 YD Self Dumping Hopper With Fork Pockets

129
New 2 YD Self Dumping Hopper With Fork Pockets

130
New 2 YD Self Dumping Hopper With Fork Pockets

131
Miller Syncrowave 250 Welder
Miller Syncrowave 250 Welder, arc welder with cooling system, in working condition, does not have a tank. 

132
Chicago Electric 90 Amp Flux Wire Welder
Chicago Electric 90 Amp Flux Wire Welder, in good working condition

135
Craftsman Air Compressor
Craftsman Air Compressor, 5 HP, 20 gallon tank, 125 max psi, 110 volt, in good condition. 

136
12' Bauer Fiberglass Step Ladder
12' Bauer Fiberglass Step Ladder, in good condition. 

137
Oxy Acetylene Torch Set
Oxy Acetylene Torch Set, complete set up, hoses appear to be cracking from age,

138
New Miller CP300 Welder
New Miller CP300 Welder, new unused condition, still in plastic wrapper.   200/230/460 Volt, 3-Phase. 

139
Miller CP300 Welder
Miller CP300 Welder, 3-phase, condition is unknown. 

140
Miller CP250TS with Wire
Miller CP250TS with Wire.   Welder is in good working condition and comes with barrel 1/3 full of welding wire. 

141
Miller DialArc 250 AC Welder
Miller DialArc 250 AC Welder, condition is unknown. 

142
Miller 60 Series Wire Feeder & Long Reach Extension
Miller 60 Series Wire Feeder & Long Reach Extension with digital readout. 

143
Aluminum Welding Spool Gun
Aluminum Welding Spool Gun with long hose and MIller Matic WC-IV weld control box.  Condition is unknown.

144
Predator 8750 Gas Generator
7000 Running watts, 8750 peak watts, A/C 120/240V, electric or recoil start, GFCI protected outlets, low hours, in very good condition

146
Craftsman Drill Press
Craftsman Drill Press mounted on metal shop table.  It has a 1/2 HP, 110V multi speed motor, comes mounted with a cross slide vice. 

147
Lincoln Welding Gun
Lincoln Welding Gun that can reach 25', it is for 400 amp, has a new liner installed and is in working condition. 

148
Tweco Welding Gun
Tweco Welding Gun for Miller Welders, 250 amp, comes with a new liner (not installed). 

149
Enco Belt Sander with Belts
Enco Belt Sander with approximately 20 extra belts, belt size is 4" X 36" with a 6" sanding disc.  

150
Heavy Duty Drill Press Vice
Heavy Duty Drill Press Vice that expands up to 9''

151
Accura Metal Band Saw
Accura Metal Band Saw that is 3 years old, 7" X 9", Operates on 220V single phase electric, it has a 60 degree mitering head, roll case is 7' on one side 5'6'' on the other, includes 10 new blades. 1) 5-7 variable pitch  8) 6-10 variable pitch 1) 8-12 variable pitch. 

152
Port-O-Brake DL860 Metal Brake
Port-O-Brake DL860 Metal Brake, 8' long,  In good condition. 

153
Xtreme Portable Dust Collector
110 Volt, Very good condition

154
Power Wheel Chair
Working condition, includes charger

155
Power Wheel Chair
Working condition, includes charger

156
Power Wheel Chair
Working condition, includes charger

157
Power Wheel Chair
Working condition, includes charger

158
New 40' Shipping Container
New 40' high cube multi-door shipping container, 4 side doors, end doors, 9'6'' high, 8' wide.  

159
New 9' Storage Container
New Storage Container, 9' long, 7'2'' wide, 8' high, double rear door, side man door, sliding window, fork pockets, many possible uses. 

160
New 9' Storage Container
New Storage Container, 9' long, 7'2'' wide, 8' high, double rear door, side man door, sliding window, fork pockets, many possible uses.

161
New 8' Storage Container
New Storage Container, 8' long, 6'6''' wide, 7'4''high, double rear door, side man door, sliding window, fork pockets, many possible uses.

162
New 8' Storage Container
New Storage Container, 8' long, 6'6''' wide, 7'4''high, double rear door, side man door, sliding window, fork pockets, many possible uses.

163
New Hot Water Pressure Washer
New Hot Water Pressure Washer, 4'000 PSI powered by a 420cc gas engine that has electric or recoil start (battery not included). Diesel powered hot water burner, LED work lights, fork pockets for easy transport, 

164
Magnum 4000 Hot Water Pressure Washer
Magnum 4000 Hot Water Pressure Washer on a steel skid for easy mounting in pickup truck or on a trailer.  It has a 15 hp gas engine and a diesel powered hot water burner.   It runs 3.5 GPM at 4'000 PSI.  It has electric and recoil start,  It is less that 1 year old and is in good working condition.   Water tank is approximately 200 Gallons.

167
New Steelman Work Bench Toolbox
New Steelman Work Bench Toolbox model 7ft-10D-2-01B, It has 10 drawers, 2 cabinets, 3 rail sliding drawers, anti slip mats, drawer locks, 110 lb rating per drawer. 

168
New Steelman Work Bench Toolbox
New Steelman Work Bench Toolbox model 7ft-10D-2-01B, It has 10 drawers, 2 cabinets, 3 rail sliding drawers, anti slip mats, drawer locks, 110 lb rating per drawer.

169
New Steelman Work Bench Toolbox
New Steelman Work Bench Toolbox model 7ft-20D-01B, It has 20 drawers, 3 rail sliding drawers, anti slip mats, drawer locks, 110 lb rating per drawer.

170
New Steelman Work Bench Toolbox
New Steelman Work Bench Toolbox model 7ft-20D-01B, It has 20 drawers, 3 rail sliding drawers, anti slip mats, drawer locks, 110 lb rating per drawer.

171
New Steelman Work Bench Toolbox
New Steelman Work Bench Toolbox model 7ft-18HD, It has 18 drawers, 2 cabinets, 3 rail sliding drawers, anti slip mats, drawer locks, 110 lb rating per drawer.

172
New Steelman Work Bench Toolbox
New Steelman Work Bench Toolbox model 7ft-18HD, It has 18 drawers, 2 cabinets, 3 rail sliding drawers, anti slip mats, drawer locks, 110 lb rating per drawer.

173
New Steelman Work Bench Toolbox
New Steelman Work Bench Toolbox model 7ft-18HD, It has 18 drawers, 2 cabinets, 3 rail sliding drawers, anti slip mats, drawer locks, 110 lb rating per drawer.

174
New Cast Iron Anvil
New Cast Iron Anvil, 200lb 

175
New 20'000 lb Electric Winch
New 20'000 lb Electric Winch, 12 volt, ready to install. 

176
New 14' Iron Gate with Deer Logo
New 14' bi-parting wrought iron gate with Deer artwork in the middle of the gate frame. 

177
New Dome Storage Shelter
New Dome Storage Shelter, 30' X 20' X 12', It comes with 6 arches, 12 anchor plates, the door size is 16' wide X 8' high, new in the box. Snow rating of 400lbs per square meter.

178
New Dome Storage Shelter
New Dome Storage Shelter, 30' X 20' X 12', It comes with 6 arches, 12 anchor plates, the door size is 16' wide X 8' high, new in the box.  Snow rating of 400lbs per square meter. 

179
New Self Dumping Hopper
New Self Dumping Hopper, 1 CY capacity, measures 3'6'' X 3'6'' at the top and has fork pockets on the bottom, 

180
New Self Dumping Hopper
New Self Dumping Hopper, 1 CY capacity, measures 3'6'' X 3'6'' at the top and has fork pockets on the bottom,

181
New Kohler 3-In-1 Generator, Compressor and Welder
New Kohler 3-In-1 Generator, Compressor and Welder, 9500W generator, 120 PSI dual tank air compressor and 200 amp max current regulator welder.   It is all powered by a Kohler 14 HP 429cc gas engine that has electric start, remote start and back up recoil start. It has never had gas or oil and is in brand new condition.  

182
New Kohler 3" Trash Pump
New Kohler 3" Water Pump that is powered by a 6.5 HP 196cc gas engine.  It is in brand new condition and never had gas or oil in it.  

183
40'000 BTU Ready Heater
40'000 BTU Ready Heater that runs and operates as it should and can be powered by either diesel or kerosene. 

184
Fork Extensions
Fork Extensions, 8' long, little use and in good condition. 

185
Motorcycle Lift
Motorcycle Lift in good condition with extended sides that are removable.   It also has a drive on ramp that comes off and foot pedal to operate the air, a wheel chock vice. It is wide enought to fit ATV's and some garden tractors.   1'000 lb lift capacity.  

186
Lift Gate
Lift Gate that is 7' wide, came off a box truck and is in working condition.   Installation manual is included. 

187
Pool Slide
Pool Slide 

188
Andersen Windows
Andersen Windows, various sizes of windows, most are vinyl.  

189
Roof Jacks
Roof Jacks, 2 buckets full. 

190
Pallet of New Tile Flooring
Pallet of New Tile Flooring, new in the boxes, 2 different colors.

191
4X4 Treated Posts (10)

192
Barn Metal 23' 16 Pieces A-Panel
Barn Metal 23' 16 Pieces A Panel, brown in color, 3' wide. new condition.

193
Pallet Racking (4) 48'' x 186" Uprights - (20) 8' Beams - (12) Wire Decks
Pallet Racking (4) 48'' x 186" Uprights - (20) 8' Beams - (12) Wire Decks

194
Pallet Racking Beams (14) Various Length
Pallet Racking Beams (14) Various Length

195
Pallet Racking (5) 48'' x 10' Uprights- (26) 8' Beams
Pallet Racking (5) 48'' x 10' Uprights- (26) 8' Beams

751
Deckover Equipment Trailer
Deckover Equipment Trailer that is 8' wide and19' long plus it has a 4' dovetail with folding ramps, It is a tri axle with each being rated at 7'000 lbs with newer G rated tires.   It has new electric brakes, new lights, pintle hitch and does sell with a title.   VIN: PH324161547

196
Pallet Racking Beams (4) 100''
Pallet Racking Beams (4) 100''

197
Pallet Racking (10) 42'' Uprights - (66) 8' Beams- (30) Wire Decks
Pallet Racking (10) 42'' Uprights - (66) 8' Beams- (30) Wire Decks

198
Pallet Racking Beams (14) 102''
Pallet Racking Beams (14) 102''

199
Pallet Racking Beams (8) 11' Beams
Pallet Racking Beams (8) 11' Beams

200
Pallet Racking Deck Pans (4) 48'' x 36''
Pallet Racking Deck Pans (4) 48'' x 36''

676

201
Pallet Racking Wire Decks (16) 48" x 56"
Pallet Racking Wire Decks (16) 48" x 56"

202
Pallet Racking Wire Decks (27) 48" x 58''
Pallet Racking Wire Decks (27) 48" x 58''

203
Pallet Racking Wire Decks (40) 48'' x 32''
Pallet Racking Wire Decks (40) 48'' x 32''

204
Pallet Racking (2) 48" 12'6'' Uprights (2) 48'' x 8' uprights (6) 12' beams (4) Wire Decks
Pallet Racking (2) 48" 12'6'' Uprights (2) 48'' x 8' uprights (6) 12' beams (4) Wire Decks

205
Pallet Racking Uprights (15) 48" x 18'
Pallet Racking Uprights (15) 48" x 18'

206
Pallet Racking (2) 38'' x 9'3'' Uprights - (2) 38'' x x10' uprights - (18) 106'' Arms Bolt Together
Pallet Racking (2) 38'' x 9'3'' Uprights - (2) 38'' x x10' uprights - (18) 106'' Arms Bolt Together

207
Pallet Racking (14) 38'' x 12' Uprights - (78) 106'' Beams - Bolt Together
Pallet Racking (14) 38'' x 12' Uprights - (78) 106'' Beams - Bolt Together

208
Pallet Racking Uprights (4) 42" x 12'
Pallet Racking Uprights (4) 42" x 12'

209
Pallet Racking (2) 38" x 98" Uprights - (4) 106" Beams - Bolt Together
Pallet Racking (2) 38" x 98" Uprights - (4) 106" Beams - Bolt Together

210
Pallet Racking (8) 36'' x 21' Teardrop Uprights
Pallet Racking (8) 36'' x 21' Teardrop Uprights

211
Pallet Racking (6) x 21' Teardrop Uprights
Pallet Racking (6) x 21' Teardrop Uprights

212
Pallet Racking (3) 42" x 12' Upright - (8) 8' Beams
Pallet Racking (3) 42" x 12' Upright - (8) 8' Beams

213
Pallet Racking (5) 48'' x 18' Uprights - (16) 99'' Beams - (16) 48'' x 46'' Wire Decks
Pallet Racking (5) 48'' x 18' Uprights - (16) 99'' Beams - (16) 48'' x 46'' Wire Decks

214
Pallet Racking (23) 106" Beams - Bolt Together
Pallet Racking (23) 106" Beams - Bolt Together

215
Pallet Racking (1) 38" x 10' Upright - (2) 38" x 103" Upright (12) 106" Beams Bolt Together
Pallet Racking (1) 38" x 10' Upright - (2) 38" x 103" Upright (12) 106" Beams Bolt Together

216
Pallet Racking (3) 38" x 12' Uprights - (16) 106" Beams - Bolt Together
Pallet Racking (3) 38" x 12' Uprights - (16) 106" Beams - Bolt Together

217
Pallet Racking (3) 38" x 98" Upright - (8) 106" Beams - Bolt Together
Pallet Racking (3) 38" x 98" Upright - (8) 106" Beams - Bolt Together

218
Pallet Racking (12) 48" x 10' Uprights - (18) 10' Beams - (17) 8' Beams
Pallet Racking (12) 48" x 10' Uprights - (18) 10' Beams - (17) 8' Beams

219
Wire Baskets (2)
Wire Baskets (2), 4' wide x 3'6'' deep x 32'' high. 

220
Wire Baskets (2)
Wire Baskets (2), 4' wide x 3'6'' deep x 32'' high.

221
Wire Baskets (2)
Wire Baskets (2), 4' wide x 3'6'' deep x 32'' high.

222
Wire Baskets (2)
Wire Baskets (2), 4' wide x 3'6'' deep x 32'' high.

223
Wire Baskets (2)
Wire Baskets (2), 4' wide x 3'6'' deep x 32'' high.

224
Wire Baskets (2)
Wire Baskets (2), 4' wide x 3'6'' deep x 32'' high.

225
Wire Baskets (2)
Wire Baskets (2), 4' wide x 3'6'' deep x 32'' high.

226
Wire Baskets (2)
Wire Baskets (2), 4' wide x 3'6'' deep x 32'' high.

227
Wire Baskets (2)
Wire Baskets (2), 4' wide x 3'6'' deep x 32'' high.

228
Wire Basket Shelving (8)
Wire Basket Shelving (8) 2' wide x 3' deep x 2' high.   Baskets are welded together in a stack. 

229
Wire Basket Shelving (8)
Wire Basket Shelving (8) 2' wide x 3' deep x 2' high. Baskets are welded together in a stack.

230
Wire Basket Shelving (4)
Wire Basket Shelving (4) 2' wide x 3' deep x 2' high. Baskets are welded together in a stack.

231
Wire Basket Shelving (6)
Wire Basket Shelving (6) 2' wide x 3' deep x 2' high. Baskets are welded together in a stack.

232
Cantilever Arm Rack Double Sided
Cantilever Arm Rack Double Sided, 7 arms per side, approximately 90" high.  

233
Cantilever Arm Rack Double Sided
Cantilever Arm Rack Double Sided, 7 arms per side, approximately 90" high.

234
Steel Sawhorse Set
Steel Sawhorse Set.  20'' high x 48'' wide. 

235
Steel Sawhorse Set
Steel Sawhorse Set.  18.5" high x 60'' wide. 

236
Steel Sawhorse Set
Steel Sawhorse Set. 18.5" high x 60'' wide. 

237
Steel Sawhorse Set
Steel Sawhorse Set.  (1) 24'' high x 48" wide.   (1) 25" high x 48" wide. 

238
Steel Sawhorse Set
Steel Sawhorse Set.  27" high x 60" wide 

239
LP Tank Approximately 500 Gallon
LP Tank Approximately 500 Gallon. It measures approximately 40" high, 36" diameter and 9' long. 

240
7 Pallets Of Lighting

241
5 Pallets of Lighting

242
1 Pallet of Lighting

243
Tool boxes and Organizers
Tool boxes and Organizers on a pallet, Organizers are full of assorted nuts,bolts and various hardware. 

301
Mcculloch Chain Saw
Mcculloch Chain Saw, 36" bar, unknown engine size, does not have gas but has good compression. 

244
Sidewall Barn Fan
Sidewall Barn Fan, 44'' diameter, 3-phase power. 

245
Sidewall Barn Fan
Sidewall Barn Fan, 44'' diameter, 3-phase power.

246
Sidewall Barn Fan
Sidewall Barn Fan, 44'' diameter, 3-phase power.

247
Diesel Pump
Diesel Pump with 8' of pipe, Gasboy Model, 1820

248
Fuel Tank
Fuel Tank,  60'' wide x 38" diameter.

249
Fuel Tank with Pump
Fuel Tank with Pump,   tank is 67" wide x 48" diameter, Gasboy pump included and in unknown opereating condition. 

250
Hog Roaster
Hog Roaster,   60" wide 

308
Stihl BR600 Backpack Leaf Blower
Stihl BR600 Backpack Leaf Blower, 2-stroke engine, in good running condition. 

300
Husqvarna 353 Chain Saw
Husqvarna 353 Chain Saw, 19" bar, 52cc engine, does not have gas but has good compression. 

302
Echo Chain Saw
Echo Chain Saw with case, 19" bar, no chain, does not have gas but has good compression. 

303
Mcculloch Chain Saw
Mcculloch Chain Saw, model MAC110, with case, 9" bar, does not have gas but has good compression.

304
Yard Machine String Trimmer
Yard Machine String Trimmer, 31cc 2-stroke engine, 17" cut, model Y28, does not have gas but has good compression. 

305
Boles String Trimmer
Boles String Trimmer, model BL100, 17' cut, 31cc 2-stroke engine, does not have gas but has good compression. 

306
Boles String Trimmer
Boles String Trimmer, model BL100, 17' cut, 31cc 2-stroke engine, does not have gas but has good compression.

307
HomeLite Prunner
HomeLite  Prunner, Shrub Shaper 17, 2-stroke engine, does not have gas but has good compression. 

309
Toro Mower/Mulcher
Toro Mower/Mulcher powered by a 6HP Briggs and Stratton engine, does not have gas but has good compression. 

202

310
Mower
Mower with a 3.5 HP Briggs and Stratton engine, 21'' deck, unknown running condition. 

311
Ranch King Riding Mower
Ranch King Riding Mower with a 14.5 HP Briggs and Stratton engine, 42'' mower deck, 7-speed forward and reverse transmission, 5-position deck height, does not have a battery or gas.  

312
Lawn Roller 24"
Lawn Roller 24'',  push by hand or hook to lawn tractor, needs plug, in good condition. 

313
Lawn Cart
Lawn Cart, self dumping, hooks to draw bar, 32'' wide X 40'' long, no tailgate, good condition. 

314
Lawn Cart
Lawn Cart, self dumping, hooks to draw bar, 32'' wide X 40'' long, good condition.

315
Wood Chipper
Wood Chipper with a Briggs and Stratton 5HP engine, does not have gas but has good compression.  

316
Huskee 22 Ton Log Splitter
Huskee 22 Ton Log Splitter with a 190cc Briggs and Stratton engine, pulls with a 2'' ball, does not have gas but has excellent compression. 

317
Log Splitter
Log Splitter with a 5.5 HP Briggs and Stratton engine, pulls with a 2'' ball, does not have gas but has excellent compression. 

318
Advance Retriever 5800 Industrial Sweeper
Advance Retriever 5800 Industrial Sweeper with only 8 Hours!  It has a Nissan LP powered 4-cylinder engine and is in excellent running condition.   It is all hydraulically operated and has a weight of 2'900 lbs.   Serial Number: 1077349

319
1981 Honda Goldwing Interstate GL1100I
1981 Honda Goldwing Interstate GL1100I with 24'838 miles, it has a 4-cylinder 1100cc engine with a 5-speed manual transmission. It does have the side boxes and trunk and includes a cover.  It does not currently run as it has been parked for several years.  Sells with Title- HOWEVER, with the name on the title and the paperwork that is included, it will be difficult to get it titled in your name. You are buying it with the paperwork as is.

320
Dirt Bike
Dirt Bike with a motor and transmission from a Chinese 4-wheeler.  It does start and run.  Sells with a bill of sale only.

321
Motorcycle Dolly
Motorcycle Dolly with a weight capacity of 1'250 lbs and is 8' long with a kickstand tray and is on castors.  Roll motorcycle onto stand to easily move it around garage or storage facility. 

322
Murray Go-Cart
Murray Go-Cart powered by a 318cc Tecumseh engine, has a Comet Clutch and is in running condition, brakes do need attention. 

323
Go-Cart
Go-Cart is in running condition and is powered by a 212cc Predator engine, brakes need attention.

324
Go-Cart
Go-Cart that runs and is powered by a 79cc Predator engine, brakes need attention.  

325
Case 444 Garden Tractor
Case 444 Garden Tractor powered by a Kohler K321 engine with a hydrostatic transmission that has hi-low range. Tractor has been repainted, comes with a 44" mower deck, 42" rear blade, hours are unknown, in good running condition. 

326
Carbide 150cc Go-Cart
Carbide 150cc Go-Cart, It has full suspension 2 bucket seats and is electric start.   It was in running when it was parked but not currently running. 

327
Helix 150cc Go-Cart
Helix 150cc Go-Cart, It has full suspension, bench seat for 2 people and is electric start. It was in running when it was parked but not currently running.

328
Tiron 150cc Go-cart
Tiron 150cc Go-Cart, It has full suspension, bench seat for 2 people and is electric start. It was in running when it was parked but not currently running.

329
Wizard Walk Behind Tractor
Wizard Walk Behind Tractor in unknown running condition.   It currently has a disc on the back and is gas powered.   

330
Predator Engine
Predator Engine,   It is a 420cc gas engine that has electric start and recoil start.   It does not currently have a battery and is mounted to a steel frame.   Running condition is unknown. 

331
John Deere F725 Mower
John Deere F725 Mower with 2'306 hours, It has a Kawasaki F590 liquid cooled v-twin engine, hydrostatic transmission, 54" mower deck and power steering.   It has a recent tune and service and everything works as it should.   PIN: M0F725X041354

332
Simplicity Riding Mower
Simplicity Riding Mower with a Briggs and Stratton Vanguard 16 HP V-Twin engine and hydrostatic transmission. It has a 44'' mowing deck that has adjustable height.  It has a recent tune and service and runs and operates as it should.   

333
Stihl FS55R Weed Trimmer
Stihl FS55R Weed Trimmer, starts, runs and operates. 

334
Stihl SH86C Leaf Blower
Stihl SH86C Leaf Blower, did not start, recoil would not pull.   

335
Stihl BG56C Leaf Blower
Stihl BG86 Leaf Blower, Starts and Runs

336
Stihl BG86 Leaf Blower
Stihl BG86 Leaf Blower, Starts and Runs

337
Poulan Pro Leaf Blower
Poulan Pro Leaf Blower, 25cc 2-stroke, 200 mph, did not start, has good compression.  

338
Stihl SR450 Back Back Sprayer / Leaf Blower
Stihl SR450 Back Back Sprayer / Leaf Blower, runs and operates. 

339
Stihl KM85R Combi Unit
Stihl KM85R Combi Unit, made to be attached to several different attachments, did not start, no gas, good compression 

340
Husqvarna 455 Rancher Chain Saw
Husqvarna 455 Rancher Chain Saw, runs and operates. 

341
Stihl TS670 Concrete Saw
Stihl TS670 Concrete Saw, runs and operates. 

342
Brouwer Sod Cutter
Brouwer Sod Cutter, Honda 5.5 HP GX160 Engine, runs and operates.

343
Maximum Lawn Edger, Honda GX120 engine, did not start, has good compression.  

344
Simplicity Riding Mower
Simplicity Riding Mower, It has a 14.5 hp 500cc engine and a hydrostatic transmission, 6-position deck height, bagger system is included.  It will need a starter before to long. 

345
John Deere D130 Riding Mower (No Deck)
John Deere D130 Riding Mower (No Deck),  It has a 22 HP 656cc Briggs and Stratton engine and a hydrostatic transmission, It has 482 hours, cruise control, runs and operates as it should. 

346
Wen 4750W Dual Fuel Generator
Wen 4750W Dual Fuel Generator that can run on gas or LP.   It has under 10 hours, Electric or recoil start, 246cc engine, with pull handle and on wheels for easy movement.    Almost New Condition 

347
Troy Built Riding Lawn Mower
Troy Built Riding Lawn Mower, It has a 17hp 597cc engine and a hydrostatic transmission, 5-position deck height, wash out 42" mowing deck, under 25 hours. Very good condition.  Serial Number: 4505032373

348
Honda EU2000i Generator Inverter
Honda EU2000i Generator Inverter,   just recently serviced and runs and operates as it should, very quiet.   

349
2010 Yamaha Grizzly 350 ATV, VIN # 5Y4AH28Y8AA008370
Year: 2010
Make: Yamaha
Model: Grizzly 350
Vehicle Type: ATV
Mileage:
Plate:
Body Type:
Trim Level:
Drive Line: 2WD
Engine Type: SOHC; A/C; 4-Stroke
Fuel Type: Gasoline
Horsepower:
Transmission: Automatic 
VIN #: 5Y4AH28Y8AA008370

Features and Notes:  350cc automatic 2-wheel drive ATV.  It does not currently start as it has sat for a year and it is assumed to need a carb clean but does crank over very well.   It also does include a hitch, owners manual and factory tool kit.   This sells with a bill of sale only and also has had a police VIN inspection.

350
Go-Cart
Go-Cart with a 5.5 hp Honda GX160 engine, in running condition. 

351
Go-Cart (No Engine)
Go-Cart (No Engine)  ready to have an engine bolted on.

352
Go-Cart Body
Go-Cart Body, ready to be mounted to cart or keep for a spare. 

353
7200W Generator
7200W Generator, Suburu powered, 296 hours, runs and operates

354
7200W Generator
7200W Generator, Suburu powered, 98 hours, runs and operates and has auto idle. 

355
John Deere 265 Riding Mower
John Deere 265 Riding Mower,   It has a Kawasaki FC540 engime, Hydrostatic transmission, 54" mowing deck, hours are unknown, new battery, works as it should. 

356
Hydro Seeder
Hydro Seeder with 500 gallon tank,  It needs and engine and it has the pump components. the trailer is in decent shape and uses a pintle stlye hitch.  Bill of sale only 

357
(2) 300 Gallon Dual Wall Insulated Tanks

358
Industrial Water Hose and Reel
Industrial Water Hose and Reel, Approximately 700' for traveling sprinkler. 

359
1993 Yamaha Blaster YFS200 ATV, VIN # JY43JMA0XPA146263
Year: 1993
Make: Yamaha Blaster
Model: YFS200
Vehicle Type: ATV
Mileage:
Plate:
Body Type:
Trim Level:
Drive Line:
Engine Type: 1cyl, 195 cc; 2-Stroke
Fuel Type: Gasoline
Horsepower:
Transmission: 6-Speed Manual
VIN #: JY43JMA0XPA146263

Features and Notes: 200cc 2-stroke oil injected air cooled engine, it has new tires.   It has been parked for a few years and curently does not start.

360
Kees Walk Behind Mower
Kees Walk Behind Mower,   It has a 48'' mowing deck, Kawasaki FC420V Engine and is self propelled,   unknown running condition. 

361
Lawn Edger
Lawn Edger with a 3.75 hp Briggs and Stratton engine,  It was in running condition when it was put away last year.

362
Craftsman LTS2000 Riding Lawn Mower
Craftsman LTS2000 Riding Lawn Mower, 20 HP Briggs and Stratton Engine, 42'' Deck, with bagger system, hydrostatic drive transmission, 6-position deck height, runs but needs new battery.

395
Heavy Equipment Key Set 24 Keys
Heavy Equipment Key Set 24 Keys.   Kit includes keys for John Deere, Toyota, Yanmar, Hyster, CAT, Lull, Volvo, Case, Skytrack, Bobcat, Hybrid, Massey Ferguson, Snorkel, JLG, Upright, New Holland, Skyjack, Genie, Snorkel and many more.  

396
Heavy Equipment Key Set 24 Keys
Heavy Equipment Key Set 24 Keys. Kit includes keys for John Deere, Toyota, Yanmar, Hyster, CAT, Lull, Volvo, Case, Skytrack, Bobcat, Hybrid, Massey Ferguson, Snorkel, JLG, Upright, New Holland, Skyjack, Genie, Snorkel and many more.

397
Heavy Equipment Key Set 24 Keys
Heavy Equipment Key Set 24 Keys. Kit includes keys for John Deere, Toyota, Yanmar, Hyster, CAT, Lull, Volvo, Case, Skytrack, Bobcat, Hybrid, Massey Ferguson, Snorkel, JLG, Upright, New Holland, Skyjack, Genie, Snorkel and many more.

398
Heavy Equipment Key Set 24 Keys
Heavy Equipment Key Set 24 Keys. Kit includes keys for John Deere, Toyota, Yanmar, Hyster, CAT, Lull, Volvo, Case, Skytrack, Bobcat, Hybrid, Massey Ferguson, Snorkel, JLG, Upright, New Holland, Skyjack, Genie, Snorkel and many more.

399
Heavy Equipment Key Set 24 Keys
Heavy Equipment Key Set 24 Keys. Kit includes keys for John Deere, Toyota, Yanmar, Hyster, CAT, Lull, Volvo, Case, Skytrack, Bobcat, Hybrid, Massey Ferguson, Snorkel, JLG, Upright, New Holland, Skyjack, Genie, Snorkel and many more.

400
Lister Petter Diesel Engine
Lister Petter Diesel Engine, 4-cylinder engine with radiator, good working condition, on skid.  

401
Go Fast Grade Resaw
Go Fast Grade Resaw with complete run around system, 12 or 24 volt controls, 14'' capacity, all hydraulic set up.

402
Morbark Chip-Pac
Morbark Chip-Pac, 48'', 3-knife, includes chipper, shaker and cyclone, in fair condition. 

403
Dust Blower
Dust Blower, 48" diameter, no power.  In fair condition.  

404
Belt Conveyor
Belt Conveyor that is 30'' wide, 56' long, hydraulic drive, does not include the belt.  

405
Roll Case
Roll Case that is 24' wide and 28' long and comes in 2 sections, rollers are 81/2'' diameter, no power. 

406
Hydraulic Tank Unit
Hydraulic Tank Unit that is 32'' x 60'' x 46" high,  includes 2 pumps, 1 pressure comp and 1 vain type.  

407
Line Shaft
Line Shaft that is 2 7/16" diameter X 7' long and includes bearings and pullys. 

408
Chamfer
Chamfer with air and hydraulic drive and is in good condition. 

409
John Deere Power Unit
John Deere Power Unit,  It is a 4-cylinder and includes the clutch, approximately 80-90 HP, hours are unknown, 

410
Woodmizer LT40 Sawmill
Woodmizer LT40 Sawmill, It is powered by a Honda GX630 engine, it is all manual, hours are unknown, runs and operates as it should, it will have a new battery before auction, includes several new bands and an attachment for shingles.   Serial Number 09881377AK

411
Morbark Chipper
Morbark Chipper that is portable and powered by a Wisconsin V-twin gas engine that has electric start, It is a 3-knife and in good working condition.   It does need a new fuel line 

412
2006 Woodmizer LT70 Sawmill
2006 Woodmizer LT70 Sawmill, Fully portable and has electric drive, full hydraulics, laser light, debarker, 1 1/2 band, chain log turner, no controls or set works. In overall good condition. approximately 1'000 hours.     VIN: 456D724186NCA7446

413
CAT Genset with 400KW Generator
CAT Genset with 400KW Generator, It has a CAT 3406 Turbo diesel engine that has less than 200 hours on rebuild.   It does have new pistons and cylinder sleeves, runs and operates as it should, needs new coolant overflow tank and red button needs held in while starting.   

414
2001 Woodmizer LT40 Sawmill
2001 Woodmizer LT40 Sawmill, It has a Kohler Command 25 hp V-twin engine, It is all hydraulic, has a debarker, an upgraded dog system, board return, new battery, new alternator, new tires, fully portable, in good condition.    VIN: 456B424141NMJ4555

415
Roll Case
Roll Case with 18" wide rollers, 12' long, with pop up transfer chains and built in cant turner, no drive

416
Roll Case
Roll Case, 24" wide x 16' long, no drive. 

417
Belt Conveyor
Belt Conveyor, 20'' wide x 58' long, 4'' sides, hydraulic drive, belt included. 

418
Cooks Bandmill
Cooks AC36 Bandmill, mill is disassembled and appears to be complete, no power on head unit, track is fully hydraulic with 24" log capacity with controls, air set works

419
Cummins Power Unit
Cummins Power Unit.  It is a factory remanufactured 5.9 liter 160 hp Cummins Engine with a complete new clutch and Murphy controls. 

421
Conveyor
Conveyor, 24" long, electric drive, 

422
Bayle Grain Bin Drying Fan with 75HP Motor
Bayle Grain Bin Drying Fan with 75HP Motor, 1'400 bushels per hour, built in 1995, Model AFC445, Serial Number 100123-65.  It has a Baldor 75 hp 3-phase electric motor in good working conditon.

500
2014 Bobcat T870 Skid Loader
2014 Bobcat T870 Skid Loader with only 3'209 hours.   It has new tracks with under 200 hours on them.   It has a Tier 4, 4-cylinder turbo charged Kubota diesel engine rated at 100 horsepower, 2-speed drive,  a lift capacity of 5'200 lbs.  Features include a full cab with heat and air conditioning, auxiliary hydraulics, air suspension seat, ISO or H pattern hand controls, radio, power attach, code start, unit will sell with a 83" bucket.   Product ID Number: A3PG13113

501
Case 1818 Skid Loader
Case 1818 Skid Loader powered by a 2 cylinder Onan gas engine that is rated at 18 HP.   It has a lift capacity of 1'100 lbs, and operating weight of 2'593 lbs, comes with a 60" bucket, shows 2'648 hours, hand controls, tires are at about 10%, just recently serviced and runs as it should.    Fuel petcock was added, must be shut off and let unit turn off or engine will fill with gas.    PIN: JAF007-836

502
John Deere CT322 Skid Loader
John Deere CT322 Skid Loader with 4'268 hours.  It is powered by a 4-cylinder turbo charged  2240 engine that makes 66 HP.  It has a lift capacity of 3'200 lbs and comes with a 72'' bucket.   It has good tracks, power attach, auxiliary hydraulics, hand and foot controls.   It is just out of the shop with a fresh service including new injectors, new fuel pump.  Radiator and drive motors are new 1 year ago.  Product ID Number: T0322TA136307

503
2019 CAT 259D3 Skid Loader
2019 CAT 259D3 Skid Loader with 990 hours.   It is powered by a CAT C3.3B turbo diesel engine that makes 74 horsepower, it is a 2-speed, it has a lift capacity of 2'870 lbs, H2 performance package with auxiliary hydraulics, electronic self level, full cab with heat and cold air conditioning, suspension seat, stereo, hand controls with foot throttle, good tracks, everything works as it should, well cared for very clean machine and it has only had 1 owner.   Product ID Number: CAT0259DJCW902194

Follow this link for a full spec sheet 
https://s7d2.scene7.com/is/content/Caterpillar/CM20190726-932c7-3cd82  

504
2013 CAT 272D Skid Loader
2013 CAT 272D Skid Loader with 3'795 hours, It has a CAT C3.8 Turbo charged 2-speed diesel engine that is rated at 98 HP, auxiliary hydraulics, power attach, full cab with heat and air conditioning, hand controls, foot throttle, suspension seat, 80'' bucket, lift capacity of 3'200 lbs, almost new tires, operating weight of 18'527 lbs.   This is the biggest wheel machine CAT made at the time of manufacture.   Product ID Number CAT0272DTGSL00281

505
Toro Dingo TX-420 Walk Behind Skid Loader
Toro Dingo TX-420 Walk Behind Skid Loader, It is powered by a Kohler V-twin engine and has auxiliary hydraulics, 41" loader bucket, 500 lb lift capacity, quick attach. Rubber tracks will need replaced soon.    Serial Number 280000159

506
2002 Bobcat T200 Skid Loader
2002 Bobcat T200 Skid Loader with 4'667 hours,   It has a 4-cylinder Turbo diesel engine rated at 73 HP, It has a full cab with Heat and A/C ( but doesn't blow cold), auxiliary hydraulics, power attach, hand and foot controls, 2'000 lb lift capacity, it was serviced 100 hours ago, does not include attachment, tracks have 50% tread but are cracked.   Product ID Number: 518915808

540
Genie Z-45/22 Boom Lift
Genie Z-45/22 Boom Lift with 5'448 hours.  It has a 4-cylinder Ford engine that runs on either gas or propane and is 4-wheel drive. It has a maximum platform height of 45' and a maximum reach of 22'.  The platform can hold up to 2 people and has a lift capacity of 500 lbs. It was  built in  1997 everything works and operates as it should and is in good working condition.  The unladen weight is 14'400 lbs.  Serial Number: Z-45-005592

541
2013 Haulotte 45XA Man Lift
2013 Haulotte 45XA Man Lift from a rental fleet in good working condition amd has 9'913 hours.  It has a maximum height of 45' a maximum reach of 27' a lift capacity of 500 lbs or 2 people and weighs 4'900 lbs.   It is powered by a Kawasaki V-twin engine, it is 2-wheel drive, 2-wheel steering, 4 outriggers that have auto leveling and cylinders were recently repacked.  Everything works and is in good condition.  The drive is powered by the gas engine and the lift is powered the electrical system that has a built in charger.  

542
2007 JLG 600S Boom Lift
2007 JLG 600S  Boom Lift that is powered by a dual fuel Ford engine that can run or gas or LP.  It has 4'561 hours, 4-wheel drive, foam filled tires, a platform maximum height of 60', maximum horizontal reach of 49', platform weight capacity of 1'000 lbs, total weight of 21'461 lbs, good paint and decals, in excellent working condition, 
Serial Number: 0300114123

543
2005 JLG E450AJ

SPECIFICATIONS

General

Year
2005
Manufacturer
JLG
Model
E450AJ
Condition
Used
Hours
1457
Stock Number
6576R
Powertrain
Drive
2 WD

560
JLG Scissor Lift 1932E2
JLG Scissor Lift 1932E2 with only 325 hours.  It has a maximum height of 19' and is 32" wide.  It has an extendable platform, 500 lb or 2 person capacity, fork pockets, works and operates as it should.  Serial Number: 200108916

561
MEC Scissor Lift
MEC Scissor Lift model 2548HT, It has a platform height of 25' and a width of 48" and is 8'6'' long with an extendable platform,  It has new batteries, a new charger and fork pockets for easy loading, hours are unknown.  

562
JLG Scissor Lift 2646E2
JLG Scissor Lift 2646E2, has a platform height of 26' and is 46'' wide.  It has an extendable platform that can hold 750 lbs, It has also has new batteries, a new charger and fork pockets for easy loading.   Serial Number 0200087766

563
JLG 1932E2 Scissor Lift
JLG 1932E2 Scissor Lift, It does not currently have batteries and running condition is unknown,    19' Lift height and 32" wide, 500 lb lift capacity, extendable platform, fork pockets for easy loading, 

580
Toyota Forklift
Toyota Forklift with a 7'400 lb lift capacity.   It has a 3 stage mast, side shift, 48" forks, 2-speed forward drive, lp powered, fresh paint, decent tires and runs good.   Tank is not included and the hours are unknown as gauges do not work.  Model: FGC33.  Serial Number: 12547. 

581
Allis-Chalmers Forklift
Allis-Chalmers Forklift with only 8'583 hours and a 12'000 lb lift capacity.  It has 60" forks, dual front tires, 2-stage mast, side shift, weight of 16'248 lbs.   Everything works on this machine, it was a former rental, does have a small oil leak by side shift, lp tank not included, Serial # M1TF83

582
Nissan Forklift
Nissan Forklift with 9'249 hours and a lift capacity of 7'100 lbs.   It has a 3-stage mast, 48" forks, side shift, good tires and weighs 11'800 lbs.   Lp tank is not included.  Serial Number: D238599

583
Big Joe EZ-30 Electric Pallet Jack
Big Joe EZ-30 Electric Pallet Jack. It has a lift capacity of 3'000 lbs, New batteries, built it charger, 48" forks, good working condition, Serial number: E2021760

584
Big Joe EZ-30 Electric Pallet Jack
Big Joe EZ-30 Electric Pallet Jack. It has a lift capacity of 3'000 lbs, New batteries, built it charger, 48" forks, good working condition, Serial number: E2021426

585
Toyota Electric Pallet Jack
Toyota Electric Pallet Jack with a 4'000 lift capacity and has 10'215 hours.   It has a total weight of 800 lbs,  has good batteries and is good working condition.   Model 6HBW20

586
Clark Forklift
Clark Forklift that is LP powered and has a 3-stage mast with side shift and a lift capacity of 2'900 lbs.  It has6'668 hours,  48" forks, new battery, fresh service and is in good running condition.   Serial Number: G127-0275-7645K0F  Model Number: GCS17S

587
Mitsubishi Fork Lift
MitsubishiIt Fork Lift that has 9'012 hours and is LP powered.   It has a lift capacity of 3'000 lbs, 3-stage mast, side shift, 42'' forks, new battery, fresh service and is in good running condition.  Serial Number: AF81B-51026  Model Number : AF81B-51026

588
Crown Electric Pallet Jack
Crown Electric Pallet Jack, in working condition with 46'' forks and has a lift capacity of 4'500 lbs.   Model: WP3035-45.   Serial Number 7A257353

589
Crown Electric Pallet Jack
Crown Electric Pallet Jack, 4'500 lbs lift capacity, in working condition, needs new batteries.  Model WP-2335-45

590
Crown Electric Pallet Jack
Crown Electric Pallet Jack, 4'500 lbs lift capacity, in working condition, needs new batteries. Model WP-2335-45

591
Crown Electric Pallet Jack
Crown Electric Pallet Jack, 4'500 lbs lift capacity, in working condition, needs new batteries. Model WP-2335-45

592
Crown Electric Pallet Jack
Crown Electric Pallet Jack, 4'500 lbs lift capacity, in working condition but needs some tlc,  needs new batteries. Model WP2035-45

600
CAT 910 Wheel Loader
CAT 910 Wheel Loader with 8'067 hours, It has a 9'10'' bucket, 3 speed transmission and is powered by CAT 4 cylinder 3204 diesel engine that is rated at 65 horsepower and has a weight of 14'200 lbs. The tires are at about 10%.  Serial Number: 80U0430

601
1998 CAT 924F Wheel Loader
1998 CAT 924F Wheel Loader with 23'886 hours.  It is powered by a CAT 3114 turbo charged diesel engine that is rated at 111 HP.   The engine is backed by a Powershift Transmission with 4 forward and 3 reverse gears. It has a weight of 20'000 lbs. It has a full cab with heat and a/c and a suspension seat.  It sells with 44'' forks.  The machine works and operates as it should.  The tires are rated at 25-50%.  Product ID Number : 5NN00223

602
Loader Bucket
Loader Bucket that is 94" wide, has a good edge, known to fit a CAT 924F and possibly other models also.  

603
2 Wheel Loader Tires
2 Wheel Loader Tires  size 17.5R 25 both have low tread but are still in useable condition.  

604
2007 Volvo L110F Wheel Loader
2007 Volvo L110F Wheel Loader. It is powered by a 6 cylinder 2244  turbo charged and intercooled diesel engine rated at 228 horsepower that is backed by an automatic powershift transmission that has 4 forward and 4 reverse gears.  It has only 4'787 hours, a complete cab with heat and air conditioning, a suspension seat, adjustable steering, quick attach and much more.   This loader has been very well professionally maintained and service records are available.  Bucket and forks sold separately.    Product ID Number: L110FV61618

605
Wheel Loader Bucket
Wheel Loader Bucket, Volvo model 80575  it is 9'6'' wide and 5' high with quick attach and is in good condition. 

606
Wheel Loader Forks
Wheel Loader Forks that are 57'' long and have adjustable width.  They are in good condition. 

607
Hyster C612 Smooth Drum Vibratory Roller
Hyster Smooth Drum Vibratory Roller that is powered by a Detroit Diesel engine.   The drum is 6' wide and is in good condition, the hours are unknown but believed to be 3'500-4'000 and a new meter was put on 28 hours ago.   It runs and operates as it should. The tire does have a slow leak.   Serial Number 1630

610
1995 Case 850G Longtrack Dozer
1995 Case 850G Longtrack Dozer with 6'846 hours, It runs and operates and has 18'' wide tracks, 8 1/2' blade.  It is powered by a Case 6T-590 6-cylinder engine that nets about 120 horsepower and has 4 forward and 4 reverse gears and seems to be  in good working condition.  Product ID Number: JJG0217824

611
Fiat-Allis FD9 Dozer
Fiat Allis FD9 Dozer with 4'363 hours and is powered by a turbo charged diesel engine rated at 90 HP.  It has a 9' 4-way blade, decent undercarriage, Everything works and is in good condition.   

612
1970 Case 310G Crawler Dozer
1970 Case 310G Crawler Dozer, it has a 38 hp 4-cylinder gas engine, 4 way  blade that is 6 1/2' wide, 4 speed forward gears and 1 reverse, newer sprockets and rollers, grease tighteners, 25 hours on engine rebuild, no leaks, works and operates as it should.   Serial Number: 3039711   ***update NEW Decals***

620
1997 Case 9020B Excavator
1997 Case 9020B Excavator with 11'398 hours.  It has 2' wide tracks, 42" 5-tooth bucket and a hydraulic thumb.  The front glass is missing the other glass is discolored and it does have some leaks.   It has a digging depth of approximately 20' and a reach across the ground of about 30' and weighs 35'275 pounds.   It has a 4 cylinder 2239 turbo charged diesel engine that puts out 106 horsepower, It is in good running condition. Product ID Number: DAC0201476

621
CAT 307 SSR Excavator
CAT 307 SSR Excavator in good running condition.   It has rubber tracks, articulating stick, engine rated at 40 HP, weight if 16'300, reach across the ground is 24' and dig depth is 15'.  It has a 7'6" back fill blade, 33" 7-tooth bucket with smooth edge attachment, mechanical thumb, It is missing the sunroof and door window.   Good operating machine.   

622
Kubota KX027 Mini-Excavator
Kubota KX027 Mini-Excavator with 3'489 hours.  It has a 20" bucket with a hydraulic thumb, 58" backfill blade, 12" wide steel tracks. It is powered by a 4-cylinder Kubota diesel engine and is in working condition however the backfill blade does not go up.   Serial Number: 10036.  Engine Number 218455

623
Insley Crane
Insley Crane with a 35' boom,   It ran and operated when it was parked 8 years ago.   It sells offsite and can be viewed at 16483 CR 8  Bristol, IN 46507.  Buyer is responsible for loading and removal.   

624
2008 CAT 303C CR Mini Excavator
2008 CAT 303C CR Mini Excavator with around 3'000 hours.   It is powered by a CAT 3 cylinder diesel engine rated at 30 HP and is a 2-speed.   It has a 24" 5-tooth bucket with a hydraulic thumb, mechanical quick coupler, 5' 4-way back fill blade, reach is 16', max dig depth is 9'6'', rubber tracks are at about 50%, pins a bit sloppy, runs and operates and tracks well, hour meter is not correct.   Serial Number: BXT02888

625
Vermeer Trencher V2050
Vermeer Trencher V2050.  It has a 52'' arm,  a Kohler Command 20 hp engine, hour meter shows 708 hours, runs and operates. 

630
John Deere 440D Skidder
John Deere 440D Skidder with only 151 hour on rebuilt motor and new transmission seals, bearing, clutch and flywheel as of 4-27-2021.  It is powered by a 90 HP 4-cylinder turbo charged John Deere 4-276T engine. It is 4 wheel drive (1 drive wheel doesnt engage) has newer tires rated at approximately 90%. It has a 7 foot blade, 100' of new cable on winch with 3 choker cables, just had a tune and service and comes with a full set of books and manuals,   PIN: DW440DA501857

631
Vermeer BC600XL Chipper
Vermeer BC60XL Chipper with a Kohler Command Pro 27 HP V-Twin electric start Engine with 732 hours. It is 6" rated and has auto feed, This machine is outfitted with a hydraulic drive for easy movement, pulls with 2" ball and has lights,   VIN: 1VR2091HB1003980

631A
Vermeer BC1500 Chipper
Vermeer BC1500 Chipper in good working condition, It has a John Deere 125 hp diesel engine, approximately 7'600 hours, recently serviced, pintle hitch, good tires, works and operates as it should. 

632
Timberjack 225 Skidder
Timberjack 225 Skidder that is powered by a 353 Detroit Diesel engine and has a 4-speed forward and reverse transmission with Hi-low gear and it is a 4-wheel drive.   It also has an Eaton 20 ton winch that has 4 speed forward and reverse with Hi-low and comes with 3 chokers and has the room for 4 chokers. The winch cylinders hve been recently rebuilt and has a new kit in it. The tires hve good tread depth but do have some chunks out of some of the lugs and they are foam filled. Everything works as it should and it does not have any leaks and the hours are unknown.   Serial Number: 792980

650
2007 John Deere 5325 tractor with 542 Loader
2007 John Deere 5325 with a 542 loader bucket and only has 590 hours! It is powered by a 3.1 liter 5-cylinder 67 horsepower turbo diesel engine and backed by a 12-speed transmission with power reverse.  It is a 4-wheel drive, comes with a 6' quick attach loader bucket, 55 horsepower PTO, 3 point hitch, remote hydraulics, excellent paint, always stored inside, tires rated over 80%, Very nice clean machine.   Serial Number : LV5325R334428

651
2006 Kubota BX1850
2006 Kubota BX1850 with only 7 hours.   It has a 3 cylinder Kubota diesel engine rated at 18 HP, a hydrostatic transmission, hydrostatic power steering, 4-wheel drive, a 54" mower deck, 3-point hitch and PTO.   Several attachments are made for this tractor including front loaders.   Model BX1850T54   Serial Number: 53974

652
Fordson Major Diesel Tractor
Fordson Major Diesel Tractor, It is powered by a Ford 3.6 liter 4-cylinder diesel engine and is backed by a 6-speed manual transmission. It is a 2 wheel drive, and has a 540 PTO, 3-point hitch, draw bar, rear hydraulics, original hours are unknown.  It does start and run.  

653
1955 Farmall 400 Row Crop Tractor
1955 Farmall 400 Row Crop Tractor,  It is powered bt a 4.3 liter gas engine that is rated at 50 horse power and backed by a manual transmission with 10 forward gears and 2 reverse gears.  It is a 2wd and has a 540 PTO, Drawbar , 3-point hitch, rear hydraulics.  It runs and operates good and has fresh paint.   Serial Number: 14698

654
1997 Case 4230 Tractor
1997 Case 4230 Tractor that is rated at 80 horsepower.  It is powered by a Case 4.4 liter diesel engine and backed by a manual synchromesh transmission with 8 forward gears and 4 reverse.  It has 3'070 hours, full cab with heat and a/c, remote hydraulics, drawbar,  3-point hitch, 540 and 1000 PTO, rear tires are worn, one owner machine, Three point is currently stuck in place. Had worked but seller hasn’t used it in multiple years.
Slight fuel leak.
Product ID Number: 4230RXLJJE0916598

655
Knight Pro Twin Slinger Manure Spreader
Knight Pro Twin Slinger Manure Spreader with side discharge, 16' long, augers are wore, in working condition, stored inside, Model 8024

656
1941 Farmall H Tractor
1941 Farmall H Tractor with a 4 cylinder gas engine and a 5-speed manual transmission, 540 PTO, drawbar, 6 volt electrical system, runs and drives.   

700
1995 Mack RB690S Dump Truck, VIN # 1M2AM20C2SM002600
Year: 1995
Make: Mack
Model: RB690S
Vehicle Type: Truck
Mileage: 332'005
Plate:
Body Type:
Trim Level:
Drive Line:
Engine Type: L6, 12.0L (728 CID)
Fuel Type: Diesel
Horsepower: 300HP (224kW)
Transmission: Manual
VIN #: 1M2AM20C2SM002600

Features and Notes:  1995 Mack RB690S Dump Truck, It is a Tri-Axle and has 19'428 hours, 7-speed transmission, runs and drives, 8' X 16' dump bed, tires are at or below 10%, the speedometer and fuel gauge are not working correctly. 

701
1995 Mack RB690S Dump Truck, VIN # 1M2AM20C9SM002593
Year: 1995
Make: Mack
Model: RB690S
Vehicle Type: Truck
Mileage:257'283
Plate:
Body Type:
Trim Level:
Drive Line:
Engine Type: L6, 12.0L (728 CID)
Fuel Type: Diesel
Horsepower: 300HP (224kW)
Transmission: Manual
VIN #: 1M2AM20C9SM002593

Features and Notes: 1995 Mack RB690S Dump Truck, It is a Tri-Axle and has 18'918 hours, 7-speed transmission, runs and drives, 8' X 16' dump bed, tires are at or below 10% and the tailgate is off, the speedometer and fuel gauge are not working correctly.

702
1995 Mack RB690S Dump Truck, VIN # 1M2AM20C7SM002592
Year: 1995
Make: Mack
Model: RB690S
Vehicle Type: Truck
Mileage: 342'475
Plate:
Body Type:
Trim Level:
Drive Line:
Engine Type: L6, 12.0L (728 CID)
Fuel Type: Diesel
Horsepower: 300HP (224kW)
Transmission: Manual
VIN #: 1M2AM20C7SM002592

Features and Notes: 1995 Mack RB690S Dump Truck, It is a Tri-Axle and has 18'644 hours, 7-speed transmission, runs and drives, 8' X 16' dump bed, tires are at or below 10% and the tailgate is off, the speedometer and fuel gauge are not working correctly.

703
1995 Mack RB690S Dump Truck, VIN # 1M2AM20C5SM002591
Year: 1995
Make: Mack
Model: RB690S
Vehicle Type: Truck
Mileage: 337'168
Plate:
Body Type:
Trim Level:
Drive Line:
Engine Type: L6, 12.0L (728 CID)
Fuel Type: Diesel
Horsepower: 300HP (224kW)
Transmission: Manual
VIN #: 1M2AM20C5SM002591

Features and Notes: 1995 Mack RB690S Dump Truck, It is a Tri-Axle and has 18'644 hours, 7-speed transmission, runs and drives, 8' X 16' dump bed, tires are at or below 10% and the tailgate is off.  It was driven to the auction and does smoke and seems to be under powered, the speedometer and fuel gauge are not working correctly.

704
1984 International 1955 Dump Truck, VIN # 1HSLRTVN8EHA54030
Year: 1984
Make: International
Model: 1955
Vehicle Type: Truck
Mileage:231'812
Plate:
Body Type:
Trim Level:
Drive Line: 4x2
Engine Type: L6, 7.6L (466 CID)
Fuel Type: Diesel
Horsepower:
Transmission: Manual
VIN #: 1HSLRTVN8EHA54030

Features and Notes:  1984 International 1955 Dump Truck that runs and drives.   It has a 8' wide X 9' long dump bed, diamond plate tool boxes, good tires, air brakes, two-speed axle and a heavy duty hitch. It was driven to the auction location and seems to drive good, the temperature light goes on and off intermittently.  

705
1994 Kenworth T450 Truck, VIN # 2XKND99X5RM635217
Year: 1994
Make: Kenworth
Model: T450
Vehicle Type: Truck
Mileage: 478'195
Plate:
Body Type:
Trim Level:
Drive Line: 6x4
Engine Type: L6, 10.8L
Fuel Type: Diesel
Horsepower:
Transmission: Manual
VIN #: 2XKND99X5RM635217

Features and Notes:  Kenworth day cab semi tractor with a Cummins Engine.  It does run and drive, has dual fuel tanks, missing some batteries and the tires are at or below 25%. It was driven to the auction location and has some issues including bad steering, bad brakes and issues with holding and or building air pressure.  

706
1984 International 1654 Truck, VIN # 1HTLAHEHXEHA38793
Year: 1984
Make: International
Model: 1654
Vehicle Type: Truck
Mileage: 260'589
Plate:
Body Type:
Trim Level:
Drive Line: 4x2
Engine Type: V8, 6.9L
Fuel Type: Diesel
Horsepower:
Transmission: Manual
VIN #: 1HTLAHEHXEHA38793

Features and Notes: Rollback tow truck in running condition.  It has a Challenger steel bed that is 92" wide and 19' long, electric 10'000 winch, manual windows and locks. runs and drives but needs TLC,  (chains and hooks not included.)

707
1995 Chevrolet C3500 Pickup Truck, VIN # 1GBKC34N2SJ101629
Year: 1995
Make: Chevrolet
Model: C3500
Vehicle Type: Pickup Truck
Mileage: 115'382
Plate:
Body Type: 2 Door Cab; Chassis
Trim Level: Base
Drive Line: RWD
Engine Type: V8, 7.4L
Fuel Type: Gasoline
Horsepower:
Transmission: Automatic 
VIN #: 1GBKC34N2SJ101629

Features and Notes:  Good running and driving flatbed truck with only 115'382 miles.  It has a 14' bed with a headache rack.  It includes a toolbox, newer tires, trailer brake hookup, new alternator, newer battery, bench seat, manual windows and locks, GVWR 15'000 lbs, hydraulic brakes and gas engine.   

708
Dump Truck Bed
Dump Truck Bed manufactured by Galion-Godwin.  It is 7' wide X 11' long and has been reconditioned.   It has new paint, new lights, new wood on the sides.   It was last mounted on an International single axle dump truck.  Model # 100USD-11  Serial # B11-0115

709
1997 Chevrolet K1500 Pickup Truck, VIN # 1GCEK14R5VE106520
Year: 1997
Make: Chevrolet
Model: K1500
Vehicle Type: Pickup Truck
Mileage: 174'181
Plate:
Body Type: 2 Door Cab; Regular
Trim Level: Base
Drive Line: 4WD
Engine Type: V8, 5.7L; CPI
Fuel Type: Gasoline
Horsepower:
Transmission:Automatic 
VIN #: 1GCEK14R5VE106520

Features and Notes:  Good running work truck with floor shift 4-wheel drive. It has manual windows and locks and a 8' bed. The frame is rusted through and needs a rear brake line replaced.  

710
2000 GMC Savana Van, VIN # 1GTGG25F0Y1236754
Year: 2000
Make: GMC
Model: Savana
Vehicle Type: Van
Mileage: 300'234
Plate:
Body Type: 3 Door Van; Cargo
Trim Level: Base
Drive Line: RWD
Engine Type: V8, 6.5L; Turbo
Fuel Type: Diesel
Horsepower:
Transmission: Automatic 
VIN #: 1GTGG25F0Y1236754

Features and Notes:  Good running diesel powered work van with newer Yokohama tires. Transmission seems a bit weak in low gear when accelerated hard.   Van does include shelving inside. 

711
2005 Jeep Liberty Multipurpose Vehicle (MPV), VIN # 1J4GL58K25W539713
Year: 2005
Make: Jeep
Model: Liberty
Vehicle Type: Multipurpose Vehicle (MPV)
Mileage: 157'060
Plate:
Body Type: 4 Door Wagon
Trim Level: Limited
Drive Line: 4WD
Engine Type: V6, 3.7L (225 CID)
Fuel Type: Gasoline
Horsepower:
Transmission: Automatic 
VIN #: 1J4GL58K25W539713

Features and Notes:  It is a 4-wheel drive and has a nice body and interior.   It also has power windows, power locks, power mirrors, power seat and sunroof. 

712
2000 Volvo VNL Truck, VIN # 4V4N25UF0YN792813
Year: 2000
Make: Volvo
Model: VNL
Vehicle Type: Truck
Mileage: 1 Million Plus
Plate:
Body Type:
Trim Level:
Drive Line: 4x2
Engine Type: L6, 10.8L (661 CID)
Fuel Type: Diesel
Horsepower: 325-374HP
Transmission: 13 Speed Manual
VIN #: 4V4N25UF0YN792813

Features and Notes: 2000 Volvo VNL Truck with over 1 million miles.   It is powered by a Cummings ISM engine and backed by a 13-speed manual transmission that replaced the original 9-speed.  It is EDL Exempt as the engine has a manufacture date of 1999.  It does smoke when it starts cold.  The steer tires are at 75% and the drives are 25%.  It has a sliding 5th wheel, good air lines, dual tanks, electric brake controller and RV plug for towing campers, wired for Proheat X45 coolant and cab heat, cabinet fits standard Kenworth mini fridge, wired for inverter behind drivers seat, leather air ride seat, air conditioning works, runs and drives good. 

713
1973 Chevy C20 Custom Deluxe Pick-up Truck
1973 Chevy C20 Custom Deluxe Pick-up Truck,  It does run and drive, it has a V-8 gas engine and an automatic transmission and is 2-wheel drive.  It has a Supreme stake side bed that is 7' wide X 9' long. The odometer shows 96'440 original miles. The body is in decent condition.  VIN: CCY243F466776

714
1973 Chevy Cheyenne Super 20 Pick-up Truck
1973 Chevy Cheyenne Super 20 Pick-up Truck that has 87'999 miles.   It has a V-8 gas engine, automatic transmission and floor shift 4-wheel drive.  It is not in running condition and has been parked for 10 years.   Does not have keys.  VIN: CKY243F360906

715
1964 Ford N600
1964 Ford N600.  It has a V-8 gas engine, manual transmission and the miles are unknown, it has an 8' X 14' dump bed that is in good condition and a 17'000 lb GVWR.  It has been parked for several years and is not in running condition.  

716
2003 Ford F-350 Pickup Truck, VIN # 1FTWW32P93EC55919
Year: 2003
Make: Ford
Model: F-350
Vehicle Type: Pickup Truck
Mileage:167'199
Plate:
Body Type: 4 Door Cab; Crew
Trim Level: XL; XLT; Lariat
Drive Line: RWD; Dual Rear Wheels
Engine Type: V8, 6.0L; Turbo
Fuel Type: Diesel
Horsepower:
Transmission: Auto
VIN #: 1FTWW32P93EC55919

Features and Notes:  Very clean low mileage dually diesel that has several options that include the following.   FASS fuel filter system, CS Chip system, High Tech oil cooler, S & B air intake with a K&N Filter, New LED lights, Under coating, Tinted Glass, Sun visor, Extendable Mirrors, Nearly new Tires (1'000 miles), Chrome Exhaust stacks (removed to tow 5th wheel) replaced with new exhaust, Removable B & W hitch or use as ball hitch,  EGR Deleted at 137k miles, New ball joints at 137k, new turbo at 137k, new batteries this year, hasn't seen winter weather in 8 years.   

717
2004 Freightliner FL80 Curtain Side Truck, VIN # 1FVHBXAK24HM57975
Year: 2004
Make: Freightliner
Model: FL80
Vehicle Type: Truck
Mileage: 349'337
Plate:
Body Type:
Trim Level:
Drive Line: 6x4
Engine Type: L6, 7.2L (439 CID)
Fuel Type: Diesel
Horsepower:230
Transmission: 9-Speed Manual
VIN #: 1FVHBXAK24HM57975

Features and Notes:  2004 Freightliner curtain side truck, It has newer curtains, newer batteries, CAT 3126 engine, 9-speed Eaton Fuller transmission, air brakes, GVWR 52'000 lbs, fuel gauge does not work. Runs and drives as it should, clean truck, Title is in transit. 

718
Truck Flat Bed
Truck Flat Bed, It is 7'6'' wide and 9' long with a headache rack.  

719
2004 Chevrolet Silverado Pickup Truck, VIN # 1GCEK19TX4E349338
Year: 2004
Make: Chevrolet
Model: Silverado
Vehicle Type: Pickup Truck
Mileage:147'687
Plate:
Body Type: 4 Door Cab; Extended
Trim Level: Base; LS; LT; Z71; Work Truck
Drive Line: 4WD
Engine Type: V8, 5.3L
Fuel Type: Gasoline
Horsepower:
Transmission: Automatic 
VIN #: 1GCEK19TX4E349338

Features and Notes:  Push button 4-wheel drive, leather interior, ext cab with 3rd and 4th door, 6 1/2' bed, tow package, diamond plate tool box, remote start, power windows, power locks, power seat, power mirrors, nerf bars, bed liner, new rear shocks, tires at 50%, a/c not blowing cold, no check engine lights, works and runs as it should. 

720
1985 GMC C7000 Truck, VIN # 1GDS7D4EXFV617527
Year: 1985
Make: GMC
Model: C7000
Vehicle Type: Truck
Mileage: 130'502
Plate:
Body Type: Medium Conventional Cab & Chassis
Trim Level:
Drive Line: 6x4
Engine Type: V8, 7.0L (427 CID)
Fuel Type: Gasoline
Horsepower:
Transmission: Automatic 
VIN #: 1GDS7D4EXFV617527

Features and Notes: Gas engine was replaced 70k miles ago, air brakes, PTO, diff lock, runs and drives, was driven to the auction, will need tires, dump box is 7' 6'' wide x 11' long.   

721
2004 Chevrolet Tahoe Multipurpose Vehicle (MPV), VIN # 1GNEK13Z44R219648
Year: 2004
Make: Chevrolet
Model: Tahoe
Vehicle Type: Multipurpose Vehicle (MPV)
Mileage: 211'396
Plate:
Body Type: 4 Door Wagon
Trim Level: LS; LT; Z71
Drive Line: 4WD
Engine Type: V8, 5.3L; FFV
Fuel Type: Gasoline/E85
Horsepower:
Transmission: Automatic
VIN #: 1GNEK13Z44R219648

Features and Notes:  It has a 5.3 Liter Vortec V-8, auto transmission, push button 4-wheel drive, sunroof, heated leather interior, 3rd row seating that sits 7, power windows, power locks, power mirrors, power seat, tow package and much more, check engine light on for O2 sensor and tire pressure monitor light.   Runs and drives as it should.   

722
1999 Chevrolet Blazer Multipurpose Vehicle (MPV), VIN # 1GNDT13W6X2170867
Year: 1999
Make: Chevrolet
Model: Blazer
Vehicle Type: Multipurpose Vehicle (MPV)
Mileage: 118'000
Plate:
Body Type: 4 Door Wagon
Trim Level: Base; LS; LT
Drive Line: 4WD
Engine Type: V6, 4.3L; 90 deg.; CPI
Fuel Type: Gasoline
Horsepower:
Transmission: Automatic 
VIN #: 1GNDT13W6X2170867

Features and Notes: This SUV has had the same owner since 2002 and was Grandma driven. It has a 4.3 Liter Voortec V-6, auto transmission, push button 4-wheel drive, 4-door that seats 5, very clean body, power windows, power locks, power mirrors, check engine light is on.   

723
2001 Ford F-250 Pickup Truck, VIN # 1FTNX21F91EC22802
Year: 2001
Make: Ford
Model: F-250
Vehicle Type: Pickup Truck
Mileage: 406'488
Plate:
Body Type: 4 Door Cab; Super Cab
Trim Level: XL; XLT; Lariat
Drive Line: 4WD
Engine Type: V8, 7.3L; OHV 16V; Turbo
Fuel Type: Diesel
Horsepower: 215-235HP
Transmission: Automatic 
VIN #: 1FTNX21F91EC22802

Features and Notes: It has an extended cab, 7' wide x 6 1/2' long flat bed, trailer hitch, power windows, trailer hitch, good tires, 4x4 not currently working.  Check oil light is on and power steering is not working. 

724
1993 Ford Ranger Pickup Truck, VIN # 1FTDR15X4PTA36821
Year: 1993
Make: Ford
Model: Ranger
Vehicle Type: Pickup Truck
Mileage: 41'783 (Rolled Over)
Plate:
Body Type: 2 Door Cab; Super Cab
Trim Level: STX; XL; XLT; Splash
Drive Line: 4WD
Engine Type: V6, 4.0L (244 CID); OHV 12V; EFI
Fuel Type: Gasoline
Horsepower:
Transmission: Manual
VIN #: 1FTDR15X4PTA36821

Features and Notes:m Good running Ford Ranger with 4-wheel drive, and has an extended cab.  It also has oversize 31x10.5-15 Goodyear Wrangler Tires, and a brushguard. 

750
2010 Pro-Track Gooseneck Trailer 8' X27'
2010 Pro-Track Gooseneck Trailer 8' X27' with 5' dove tail and folding ramps.  It has dual tires on 10'000 lb dual axles, 48" tool box, new lights, new decking, fresh paint, good tires, sells with title. VIN: 5BNDG3226AW000159

752
2016 48' Aluminum Flatbed Trailer
2016 48' Aluminum Flatbed Trailer by Direct Trailers.   It has a universal moffett truck attachment on the back, headache rack, straps, sliding rear axel, in good condition.   Tires are at about 25%.   VIN: 5UJFC4822GW002833
Model Number: DT48CFTWSA-RAS-LH-G

754
Storage Van Trailer
Storage Van Trailer, for storage only.   Does not have a title and sells with a bill of sale only. It is 48' long and tires are at or below 10%.  Manufactured by Strick Corp and was built in 1989

755
Storage Van Trailer
Storage Van Trailer, for storage only. Does not have a title and sells with a bill of sale only. It is 48' long and tires are at or below 10%. Manufactured by Monon corporation and was built in 1987.

756
1984 Eager Beaver Lowboy Detach Trailer
1984 Eager Beaver Lowboy Detach Trailer,  Needs new decking, has decent tires, detatch is powered by a 11.5 horsepower Briggs and Stratton engine that is in unknown working condition, it was brought to the auction on a step deck trailer and is not deemed to be road worthy. 
VIN: 112HGB201ET350110 

757
Utility Trailer
Utility Trailer that is 6' 6'' wide ad 8' long, It is a single axle, pulls with a 2'' ball, has a jack, light need some work and sells with a bill of sale only. 

758
Enclosed Trailer 7' X 18'
Enclosed Trailer that is 7' X 18' and has double door on both the front and back,  It is a tandem axle, pulls with 2" ball, has a jack, solid floor, sells with a title. 

759
2020 Formula Cargo Trailer 8'X 18'
2020 Formula Cargo Trailer that is 8' X 18'.  It has tandem 6- lug axles, LED lights, ramp rear door, curb side man door, pulls with 2 5/16" ball, has brakes, damage on right rear, front left and right, paint damage on inside.  Sells with bill of sale only. 

760
5' X 10' Utility Trailer
5' X 10' Utility Trailer with drive on ramp, pulls, with 2" ball and has a jack, It does have a bent tongue, bent axle with one new tire. Sells with bill of sale only. 

761
12' Aluminum John Boat on Trailer
12' Aluminum John Boat on Trailer, It has 2 seats, oars, trailer pulls with a 2'' ball and has a jack, sells with bill of sale only. 

762
13' Aluminum John Boat on Trailer
13' Aluminum John Boat on Trailer, It has 3 seats, 12 volt trolling motor.  It is powered by a vintage Mercury 5 hp outboard engine, the running condition is unknown, does have good compression, on a trailer that does includes a winch and a jack and pulls with a 2'' ball. 
Bill of sale only. 

763
11' Aluminum John Boat on Trailer
11' Aluminum John Boat on a trailer and is powered by a 9.9 hp Evinrude outboard engine, and has a 12 volt trolling motor.  The running condition is unknown, does have good compression, trailer includes a winch and a jack, pulls with a 1 7/8" ball.   Bill of sale only. 

764
Car Dolly
Car Dolly, pulls with a 2" ball, needs a new coupler, does not include straps or lights, has good tires, sells with a bill of sale only. 

765
Surveyor SV291 Camper
Surveyor SV291 Camper by Forrest River.  It has a queen bed in front full bed in the back with a bunk above it.   The dinette converts into a bed and the sofa folds down for more sleeping space as well.   It has a full bathroom, full kitchen including a LP stove and oven, microwave, double sink, full fridge and freezer.   The out side has an awning, folding steps, leveling jacks, 2 LP tanks, power jack and it pulls with a 2 5/16'' ball.  The floor does feel soft. 

766
Wooden Jon Boat 12'
Wooden Jon Boat 12' in good condition.   It sells with 2 sets of oars, 2 life jackets, and a 2 HP Johnson Sea-Horse outboard motor that is in unknown running condition but has good compression.  Sells with bill of sale only. 

767
6' X 10' Utility Trailer
6' X 10' Utility Trailer, It is a single axle with a tilt bed and has good decking, It does include a jack, pulls with a 2'' ball.  It will need new lens on the lights. Sells with a title.   VIN: 4ASTS1011WS002649

768
6' x 10'6'' Equipment Trailer
6' x 10'6'' Equipment Trailer, It is a tandem axle, has 3' drive on ramps, pulls with a 2 5/16'' ball and has a jack.   It does not have lights and the tires are worn.  Sells with a bill of sale only. 

769
2009 Gator Made Deck Over Trailer
2009 Gator Made Deck Over Trailer.  It is 8' X 16' with a 4' dovetail and 4' drive on ramps. It is a tri-axle with brakes and has good tires, pintle style hitch, a new pig tail for the lights and is in good condition.   VIN: 4Z1PB25209S008001   Sells with bill of sale only.

770
7' x 16' Equipment Trailer
7' x 16' Equipment Trailer with a 2' dovetail and 5' drive on ramps. It is a a tandem axle with 8-lug wheels, pulls with a 2 5/16'' ball, has brakes,  a GVW of 12'000 lbs.   
VIN: 1VK500H2751053416

771
Karavan Trailer
Karavan Trailer, 5' X 8' with a tilt deck and a diamond plate toolbox.  It does have new lights and wiring, pulls with a 1 7/8'' ball.  Sells with bill of sale only. 

772
New 2021 Karavan Utility Trailer
New 2021 Karavan Utility Trailer.  It is 82" wide X 12' long and has a 1' dove tail and 4' drive on ramp.   It is a single axle and pulls with a 2'' ball and includes, LED lights, jack, removable and adjustable side rails, tie dow storage in fenders.   This Trailer has only been used twice.  Model KTS-2990-82-13-DT   VIN: 5KTUS1713MF589218

773
Eager Beaver Tri Axle Equipment Trailer
Eager Beaver Tri Axel Equipment Trailer, It is 8 /12' wide and 20' long with the dovetail and has 4' folding ramps, does need tires, lights and brakes are in unknown working condition.   1985 model. 

774
2011 Cargo Express 8' x 20' Enclosed V-Nose Trailer
2011 Cargo Express 8' x 20' Enclosed V-Nose Trailer with ramp rear door, curb side man door, tandem axle with brakes, includes a spare tire, tie down anchors throughout, pulls with 2 5/16" ball.

VIN: 40L1C2020BP900071

775
Equipment Trailer With Ramps
Equipment Trailer With Ramps, It is 6 1/2' wide, 16' long, tandem axle and has 5' folding ramps.   

776
Sea-Nymph Fishing Boat and Trailer
Sea-Nymph Fishing Boat and Trailer,   It is a 14' aluminum fishing boat powered by a 25 HP Mercury outboard motor and has a Motorguide trolling motor that has 46 lbs of thrust.   It also comes with a Humming bird fish finder, live well and a hand winch on the trailer.    The trailer sells with a title and the boat will have a bill of sale.  

777
2011 Elite Gooseneck Trailer
2011 Elite Gooseneck Trailer, It is 8' wide x 20' long with a 5' dovetail and 4 1/2' folding drive on ramps.  The ramp mounts have been moved from original position. The GVWR is 22'500 lbs and has decent tires, brakes and deck.   

778
2000 PJ Trailers Equipment Trailer
2000 PJ Trailers Equipment Trailer.  It is 7' wide x 21' long with a 3' dove tail and 5' drive on ramps. It is a Tri-axle and has (2) 42'' wide Knack job boxes mounted to either side, pintle hitch, needs decking, brake condition is unknown. 

779
1995 Econoline Equipment Trailer
1995 Econoline Equipment Trailer.  It is 8' wide x 18' long with a 5' dove tail and 5' drive on ramps,  It has dual tires on tandem axles with 1 wheel on either side of the suspension springs. It has a 24 ton weight capacity, pintle hitch, brakes are in unknown condition, needs new decking. 

780
2015 Belshe Equipment Trailer
2015 Belshe Equipment Trailer, It is 8 1/2' wide x 21' long plus a 6' dove tail and 7' drive on ramps.   It is a tandem axel with dually tires on each and has a pintle style hitch, good tires, good decking, air brakes are backed off because of a bad splitter valve, GVWR 25'500 lbs.  VIN: 16JF02129F1048076

781
5' x 8' Utility Trailer
5' x 8' Utility Trailer with a tilt deck.  It also includes a jack and 2' sides.   Sells with bill of sale only. 

782
4' x 8' Utility Trailer
4' x 8' Utility Trailer with a 4' x 4' ramp, pulls with 2'' ball.  Sells with Bill of Sale only 
 

783
4' x 10' Utility Trailer
4' x 10' Utility Trailer with a steel wire mesh floor. It includes a jack and pulls with a 2'' ball and it needs lights.   Sells with a bill of sale only. 

784
Sunfish Sailboat
Sunfish Sailboat, approximately 13' long, with mast, no sail, sells with bill of sale only. 

785
Aluminum Fishing Boat & Trailer
Aluminum Fishing Boat & Trailer,   boat is 14' long, has 3 bench seats, Shakespear 12 volt trolling motor, oars, boat cover included, Titles for both trailer and boat. 

786
Tri Axle Equipment Trailer
Tri Axle Equipment Trailer, 9 ton capacity, it is 78" wide x 16' long with folding 4 1/2' ramps, has a toolbox, draw bar style hitch, and draw bar on rear to pull tandem, will need lights,    has title

787
2010 Griffin Dump Trailer
2010 Griffin Dump Trailer  It is 7' wide x 14' long and includes removable ramps, New 7'000 lb tandem 8-lug axles, pulls with a 2 5/16" ball and has a good floor, pulls and operates as it should.  1 owner unit, 
VIN: 4C9BU1429AE020288

788
Truck Flat Bed
Truck Flat Bed, 8' wide x 24' long, 42" high headache rack. 

789
1997 Haulmark 30' Enclosed Gooseneck Trailer
1997 Haulmark 30' Enclosed Gooseneck Trailer, It is 8 1/2' wide x 30' long plus 8' long on top.   It has an interior height of 8' has e-track throughout and tie down points.   It comes with a ramp rear door and curb side man door, It is a tri-axle with 8-lug wheels and good brakes, It also includes items on inside to convert to a camper or toy hauler. 

790
2006 Cargo Express Enclosed Trailer
2006 Cargo Express Enclosed Trailer,   It is 7' wide x 16' long plus v-nose,   It has double rear doors, curb side man door, tandem 8-lug axles, brakes, LED lights, pulls with 2 5/16" ball and a jack.  It has also been a 1-Owner unit.   VIN: 4U01C16246A028447

791
7' X 12' Flatbed Trailer
7' X 12' Flatbed Trailer that sits on tandem 6-lug axles and has brakes, RAM tongue jack, good decking and pulls with a 2 5/16''ball.   VIN: MVIN316868IND

800
Tomahawk 96" Snow/Mulch Bucket

For year-round versatility, there is no better attachment for your skid steer than a Tomahawk 96" Snow/Mulch Bucket. Constructed from high-tensile steel, this bucket has high sides for maximum capacity and a rolled rear bottom for added strength and easier cleanup. The Tomahawk 96" Snow/Mulch Bucket easily scoops up and moves dirt, mulch, snow, gravel and more!

  • 1/8" Grade 50 High-Tensile Steel construction
  • 1/2" x 6" cutting edge 
  • 1.28 Cubic Yard Capacity
  • 96" Wide

801
Tomahawk 90" Snow/Mulch Bucket

For year-round versatility, there is no better attachment for your skid steer than a Tomahawk 90" Snow/Mulch Bucket. Constructed from high-tensile steel, this bucket has high sides for maximum capacity and a rolled rear bottom for added strength and easier cleanup. The Tomahawk 90" Snow/Mulch Bucket easily scoops up and moves dirt, mulch, snow, gravel and more!

  • 1/8" Grade 50 High-Tensile Steel construction
  • 1/2" x 6" cutting edge 
  • 1.2 Cubic Yard Capacity
  • 90" Wide

802
Tomahawk 84" Snow/Mulch Bucket

For year-round versatility, there is no better attachment for your skid steer than a Tomahawk 84" Snow/Mulch Bucket. Constructed from high-tensile steel, this bucket has high sides for maximum capacity and a rolled rear bottom for added strength and easier cleanup. The Tomahawk 84" Snow/Mulch Bucket easily scoops up and moves dirt, mulch, snow, gravel and more!

  • 1/8" Grade 50 High-Tensile Steel construction
  • 1/2" x 6" cutting edge 
  • 1.12 Cubic Yard Capacity
  • 84" Wide

803
Tomahawk 78" Snow/Mulch Bucket

For year-round versatility, there is no better attachment for your skid steer than a Tomahawk 78" Snow/Mulch Bucket. Constructed from high-tensile steel, this bucket has high sides for maximum capacity and a rolled rear bottom for added strength and easier cleanup. The Tomahawk 78" Snow/Mulch Bucket easily scoops up and moves dirt, mulch, snow, gravel and more!

  • 1/8" Grade 50 High-Tensile Steel construction
  • 1/2" x 6" cutting edge 
  • 1.0 Cubic Yard Capacity
  • 78" Wide

804
Tomahawk 72" Snow/Mulch Bucket

For year-round versatility, there is no better attachment for your skid steer than a Tomahawk 72" Snow/Mulch Bucket. Constructed from high-tensile steel, this bucket has high sides for maximum capacity and a rolled rear bottom for added strength and easier cleanup. The Tomahawk 72" Snow/Mulch Bucket easily scoops up and moves dirt, mulch, snow, gravel and more!

  • 1/8" Grade 50 High-Tensile Steel construction
  • 1/2" x 6" cutting edge 
  • 0.95 Cubic Yard Capacity
  • 72" Wide

805
Tomahawk 66" Snow/Mulch Bucket

For year-round versatility, there is no better attachment for your skid steer than a Tomahawk 66" Snow/Mulch Bucket. Constructed from high-tensile steel, this bucket has high sides for maximum capacity and a rolled rear bottom for added strength and easier cleanup. The Tomahawk 66" Snow/Mulch Bucket easily scoops up and moves dirt, mulch, snow, gravel and more!

  • 1/8" Grade 50 High-Tensile Steel construction
  • 1/2" x 6" cutting edge 
  • 0.87 Cubic Yard Capacity
  • 66" Wide

806
Tomahawk 60" Snow/Mulch Bucket

For year-round versatility, there is no better attachment for your skid steer than a Tomahawk 60" Snow/Mulch Bucket. Constructed from high-tensile steel, this bucket has high sides for maximum capacity and a rolled rear bottom for added strength and easier cleanup. The Tomahawk 60" Snow/Mulch Bucket easily scoops up and moves dirt, mulch, snow, gravel and more!

  • 1/8" Grade 50 High-Tensile Steel construction
  • 1/2" x 6" Cutting Edge
  • 0.8 Cubic Yard Capacity
  • 60" Wide

807
Tomahawk 84" Smooth Bucket

Need a better bucket for your skid steer? The general purpose Tomahawk 84" Smooth Bucket features a longer bottom than industry standard for better visibility. The rolled rear bottom adds strength and makes clean-up easier, while the wide 6" cutting edge ensures years of reliable performance. If you need a bucket for your skid steer, then the Tomahawk 84" Smooth Bucket is the obvious choice!

  • 1/2" x 6" Cutting Edge
  • 3/16" Wrap
  • 0.60 Cubic Yard Capacity
  • 84" Wide

808
Tomahawk 78" Smooth Bucket

Need a better bucket for your skid steer? The general purpose Tomahawk 78" Smooth Bucket features a longer bottom than the industry standard for better visibility. The rolled rear bottom adds strength and makes clean-up easier, while the wide 6" cutting edge ensures years of reliable performance. If you need a bucket for your skid steer, then the Tomahawk 78" Smooth Bucket is the obvious choice!

  • 1/2" x 6" Cutting Edge
  • 3/16" Wrap
  • 0.56 Cubic Yard Capacity
  • 78" Wide

809
Tomahawk 72" Smooth Bucket

Need a better bucket for your skid steer? The general purpose Tomahawk 72" Smooth Bucket features a longer bottom than industry standard for better visibility. The rolled rear bottom adds strength and makes clean-up easier, while the wide 6" cutting edge ensures years of reliable performance. If you need a bucket for your skid steer, then the Tomahawk 72" Smooth Bucket is the obvious choice!

  • 1/2" x 6" Cutting Edge
  • 10-Gauge Wrap
  • 0.5 Cubic Yard Capacity
  • 72" Wide

810
Tomahawk 66" Smooth Bucket

Need a better bucket for your skid steer? The general purpose Tomahawk 66" Smooth Bucket features a longer bottom than industry standard for better visibility. The rolled rear bottom adds strength and makes clean-up easier, while the wide 6” cutting edge ensures years of reliable performance. If you need a bucket for your skid steer, then the Tomahawk 66" Smooth Bucket is the obvious choice!

  • 1/2" x 6" Cutting Edge
  • 10-Gauge Wrap
  • 0.46 Cubic Yard Capacity
  • 66" Wide

811
Tomahawk 60" Smooth Bucket

Need a better bucket for your skid steer? The general purpose Tomahawk 60" Smooth Bucket features a longer bottom than industry standard for better visibility. The rolled rear bottom adds strength and makes clean-up easier, while the wide 6” cutting edge ensures years of reliable performance. If you need a bucket for your skid steer, then the Tomahawk 60" Smooth Bucket is the obvious choice!

  • 1/2" x 6" Cutting Edge
  • 10-Gauge Wrap
  • 0.4 Cubic Yard Capacity
  • 60" Wide

812
Tomahawk 78" HD Two-Cylinder Brush Grapple

If you need to move around brush or small logs, then the Tomahawk 78" HD Two-Cylinder Brush Grapple is the perfect attachment for your skid steer. This heavy-duty brush grapple is made from tough 1/2" steel and comes with dual top clamps for irregular-sized loads. The Tomahawk 78" HD Two-Cylinder Brush Grapple allows you to quickly and easily clear brush and other debris from a jobsite. Brush doesn’t stand a chance against this fearsome skid steer attachment!

  • 1/2" All-Steel Construction
  • Dual Top Clamps for irregular-sized loads
  • Dual Cylinder Covers
  • 78" Wide

813
Tomahawk 72" HD Two-Cylinder Brush Grapple

If you need to move around brush or small logs, then the Tomahawk 72" HD Two-Cylinder Brush Grapple is the perfect attachment for your skid steer. This heavy-duty brush grapple is made from tough 1/2" steel and comes with dual top clamps for irregular-sized loads. The Tomahawk 72" HD Two-Cylinder Brush Grapple allows you to quickly and easily clear brush and other debris from a job site. Brush doesn’t stand a chance against this fearsome skid steer attachment!

  • 1/2" All-Steel Construction
  • Dual Top Clamps for irregular-sized loads
  • Dual Cylinder Covers
  • 72" Wide

814
Tomahawk 66" Two-Cylinder Brush Grapple

Save time and effort when clearing brush with the Tomahawk 66” Two-Cylinder Brush Grapple. Constructed from 3/8” steel, this brush grapple makes an easy meal out of troublesome debris. The dual top clamps make the Tomahawk 66” Two-Cylinder Brush Grapple the perfect skid steer attachment for moving around irregularly-shaped loads.

  • 3/8" All-Steel Construction
  • Dual Top Clamps for irregularly-shaped loads
  • Dual Cylinder Covers
  • 66" Wide

815
Tomahawk 66" One-Cylinder Brush Grapple

Clear brush quickly and easily with the rugged Tomahawk 66” One-Cylinder Brush Grapple. Constructed from 3/8” steel, this brush grapple is perfect for moving around troublesome debris.

  • 3/8" All-Steel Construction
  • 3/8" Single Top Clamp
  • Cylinder Cover
  • 66" Wide

816
Tomahawk 66" One-Cylinder Grapple Bucket

Scoop up and secure your load easily with the Tomahawk 66” One-Cylinder Grapple Bucket. Featuring our rolled rear bottom for extra strength and cleanup, this grapple bucket has a tough cutting edge and powerful clamping action. The Tomahawk 66” One-Cylinder Grapple Bucket makes it easy to clamp down on debris and move it around with your skid steer.

  • 10-gauge Steel wrap
  • 1/2" x 6" Cutting Edge
  • 3/8" Top Clamp 
  • Cylinder Cover
  • 66" Wide

817
Tomahawk 72" Rock Bucket Grapple

Built from high-strength steel, the Tomahawk 72" Rock Bucket Grapple is perfect for collecting and securing small rocks and other large debris while allowing dirt to sift through. The grapple allows you to lock materials in place, quickly clearing difficult areas. The Tomahawk 72" Rock Bucket Grapple is tough enough to handle virtually any job you throw at it!

  • 1/4" Grade 50 High Tensile Steel Teeth
  • Cylinder Cover
  • 3/8" Top Clamp

818
Tomahawk 72" Rock Bucket

Clear rocks quickly and easily with our rugged Tomahawk 72" Rock Bucket! Constructed from high-tensile strength, grade 50 steel, our Tomahawk 72" Rock Bucket is built to last. The big teeth can easily rip into the earth, lifting rocks and other debris from the soil. Dirt and smaller objects easily fall through the slotted back and bottom.

  • 1/4" Teeth
  • Grade 50 High-Tensile Steel
  • 72" Wide

819
Tomahawk 66" Rock Bucket

Clear rocks quickly and easily with our rugged Tomahawk 66" Rock Bucket! Constructed from high-tensile strength, grade 50 steel, our Tomahawk 66" Rock Bucket is built to last. The big teeth can easily rip into the earth, lifting rocks and other debris from the soil. Dirt and smaller objects easily fall through the slotted back and bottom.

  • 1/4" Teeth
  • Grade 50 High-Tensile Steel
  • 66" Wide
  • 72" shown in picture

820
Tomahawk Fork Frame w/48" Forks

Add versatility to your skid steer with the Tomahawk Fork Frame w/Forks. Equipped with 48" class II forks, you can easily move around palletized materials. The high-visibility, see-through frame is ideal for operators.

  • 45 1/2" Wide
  • 35 1/2" Tall
  • 48" Class II Forks
  • High Visibility See Through Frame
  • 2800 lb. Weight Rating

821
Tomahawk Fork Frame w/42" Forks

Add versatility to your skid steer with the Tomahawk Fork Frame w/Forks. Equipped with 42" class II forks, you can easily move around palletized materials. The high-visibility, see-through frame is ideal for operators.

  • 45 1/2" Wide
  • 35 1/2" Tall
  • 42" Class II Forks
  • High Visibility See Through Frame
  • 2800 lb. Weight Rating

822
Tomahawk Fork Frame

Add versatility to your skid steer with the Tomahawk Fork Frame. By adding your own forks, you can easily move around palletized materials. The high-visibility, see-through frame is ideal for operators.

  • 45 1/2" wide
  • 35 1/2" tall
  • High Visibility See Through Frame

823
Tomahawk Round Bale Hay Spear Frame

If you live or work on a farm, then you probably know how difficult it can be to move round hay bales. Make that job easier with the Tomahawk Round Bale Hay Spear Frame. The long removable main spear and two removable bottom stabilizing spears allow your skid steer to easily pick up large round bales. The sturdy tubular steel frame is built for years of use. We think you’ll find the Tomahawk Round Bale Hay Spear Frame an indispensable attachment for your skid steer!

  • 1/4"x3"x3" Tubular Steel Frame
  • 49" Removable Main Spear
  • Two 18" Removable Bottom Stabilizing Spears
  • 1800 lb. Weight Rating

824
Tomahawk Square Bale Hay Spear Frame
If you live or work on a farm, then you probably know how difficult it can be to move large square hay bales. Make that job easier with the Tomahawk Square Bale Hay Spear Frame. The three long removable main spears allow your skid steer to easily pick up large square bales. The sturdy tubular steel frame is built for years of use. We think you’ll find the Tomahawk Square Bale Hay Spear Frame an indispensable attachment for your skid steer!
  • 1/4"x3"x3" Tubular Steel Frame 
  • 39" Removable Main Spears (3)
  • 1800 lb. Weight Rating

825
Tomahawk Thumb

The Tomahawk Thumb is the perfect attachment for your small excavator. It offers rigid support for materials when handling them in the bucket. The Tomahawk Thumb adds versatility to your excavator with a three-stage adjustable arm - allowing you to pick up and move objects like never before!

  • 3/8" Material
  • 3-Stage Adjustable Arm

826
Tomahawk Stump Bucket

Having trouble getting those pesky stumps out of the ground? Then the Tomahawk Stump Bucket is the perfect solution! Features four 7/8" thick teeth a 3/8" serrated edge to dig deep and rip those tough roots out of the ground.

  • 7/8" Thick Teeth (4)
  • 1/2" x 6" Cutting Edge
  • 3/8" Serrated Edge
  • 3/16" Wrap

827
Tomahawk Universal Mount Plate

Easily welds to your existing attachment and will allow you to use non-universal attachments on skid steers with the Tomahawk Universal Mount Plate.

  • 3/16" all-steel construction
  • Fits all models of skid loaders

828
Tomahawk Tree Boom

Move trees around easily with the Tomahawk Tree Boom. This attachment is indispensable for landscapers, as it allows you to easily pick up, move and position old and new trees with your skid steer like never before! The Tomahawk Tree Boom is constructed from high-quality steel materials for years of reliable use.

  • 1/4" x 4" x 4" Tube
  • 1/4" Quick Attach Mount Plate
  • 1/2" Upper Hook Plate

829
Tomahawk Trailer Spotter

Move your trailers around easily with our Tomahawk Trailer Spotter. Constructed to withstand the most demanding jobs, this trailer spotter accepts a standard 2" receiver hitch.

  • 3/16" Mount Plate
  • 2-1/2" Square Tube, 3/16" Wall and 13" Long
  • Accepts 2" Receiver Hitch

830
Bradco 48" Pallet Forks
Bradco 48" Pallet Forks for quick attach on tractor loader, good condition with little use. 

831
John Deere MX7 Brush Mower
John Deere MX7 Brush Mower.  It is 7' wide, runs on 540 PTO and 3-point attach. In very good condition. 

832
John Deere Round Bale Spear Attachment
John Deere Round Bale Spear Attachment,  Quick attach for tractor loader,  

833
John Deere 7' 3-Point Rear Blade
John Deere 7' wide  3-Point Rear Blade model RB2084. In good condition. 

834
New Skid Steer Backhoe
New Skid Steer Backhoe with a 9'' wide 2 teeth bucket and stationary 12" thumb.   

835
New Skid Steer 12" Backhoe Bucket
New Skid Steer 12" Backhoe Bucket with 3 teeth

836
New Skid Steer 24" Backhoe Bucket
New Skid Steer 24" Backhoe Bucket with 4 teeth. 

837
New Greatbear Skid Steer Brush Mower
New Greatbear Skid Steer Brush Mower, 66'' wide cut, quick attach. 

838
New Greatbear Skid Steer Brush Mower
New Greatbear Skid Steer Brush Mower, 66'' wide cut, quick attach.

839
New Skid Steer Heavy Grass Fork Grapple
New Skid Steer Heavy Grass Fork Grapple, 76" wide, 8 tooth, 2 cylinder, new in crate 

840
New Skid Steer Heavy Grass Fork Grapple
New Skid Steer Heavy Grass Fork Grapple, 76" wide, 8 tooth, 2 cylinder, new in crate

841
New Skid Steer Heavy Grass Fork Grapple
New Skid Steer Heavy Grass Fork Grapple, 76" wide, 8 tooth, 2 cylinder, new in crate

842
New Skid Steer Auger Attachment
New Skid Steer Auger Attachment with 3 bits, 19'', 14'' and 11'' new in crate,

843
New Skid Steer Auger Attachment
New Skid Steer Auger Attachment with 3 bits, 19'', 14'' and 11'' new in crate,

844
New Skid Steer Trencher Attachment
New Skid Steer Trencher Attachment, Approximately 4' long arm, auger side discharge, new in crate

845
New Skid Steer 72" Rock Grapple Bucket
New Skid Steer 72'' Rock Grapple Bucket, 2-cylinder, 

846
New Skid Steer Vibratory Roller Attachment
New Skid Steer Vibratory Roller Attachment, 72" wide, not for high flow hydraulics, 

847
New Skid Steer Vibratory Roller Attachment
New Skid Steer Vibratory Roller Attachment, 72" wide, not for high flow hydraulics,

848
New Skid Steer Snow Plow Attachment
New Skid Steer Snow Plow Attachment, 86" wide, 

849
New Skid Steer Rotary Cultivator Attachment
New Skid Steer Rotary Cultivator Attachment, 9 tines, 72'' wide working width, new in crate, 

850
Loader Bucket
Loader Bucket that fits a CAT 910 Wheel Loader.   It is 82'' wide and may fit other units also.   In useable condition. 

851
John Deere Roller Fairlead
Roller Fairlead for John Deere 4'000 Series winch

852
John Deere 72" Mower
John Deere 72'' rough cut mower,  540 PTO driven, 3-point lift, in good working condition.   Model 616. 

853
King Kutter 60" Mower
King Kutter 60" Mower, PTO driven and 3-point lift.  In working condition. 

854
Western V-Blade Snow Plow
Western V-Blade Snow Plow,  it is 8'6'' wide, ultra mount, MVP (multi position v plow)  In working condition. 

855
Western V-Blade Snow Plow
Western V-Blade Snow Plow, it is 8'6'' wide, uni-mount,  In working condition.

856
Skid Steer Snow Plow
Skid Steer Snow Plow,  It has a 4-way blade and is 9' wide and is in good working condition. 

857
Snow Ex Salt Spreader
Snow Ex Salt Spreader, model V Maxx 7550, still in working condition.  

858
3-Point Auger Attachment
3-Point Auger Attachment, does not include auger bit.   

859
Bobcat Skid Steer Dozer Blade
Bobcat Skid Steer Dozer Blade, It is 80'' wide and in good working condition and has been recently serviced by a Bobcat dealer.   Model: 80 Dozer    Serial Number 232111995

860
3-Point Finish Mower
3-Point Finish Mower, 72'' wide, 3-point lift and runs on 540 PTO, works but does need some new bearings. 

861
3-Point Snow Blower
3-Point Snow Blower, It is 78" wide, 2-stage augers, runs on 540 PTO and is in working condition. 

862
5' Brush Mower
5' Brush Mower, works good, blades could be sharpened, PTO shaft is 3 years old, 3-point lift.   

863
Skid Loader Forks
Skid Loader Forks,  home built and forks are 48'' long. 

864
Backhoe Bucket
Backhoe Bucket, 18'' wide 4-tooth, known to fit a Case backhoe unsure of model

865
Backhoe Bucket
Backhoe Bucket, 24'' wide 5-tooth, known to fit a Case backhoe unsure of model

865A
CAT Excavator Bucket
CAT Excavator Bucket, approximately 24" wide, 5-tooth with bolt on smooth edge.   Known to fit a CAT 307 SSR and will likely fit others as well. 

866
Set of Forks
Set of Forks  42'' long,  1 is bent.

867
New 40'' Skid Steer Spade Bucket
New 40'' Skid Steer Spade Bucket

867A
New 40'' Skid Steer Spade Bucket
New 40'' Skid Steer Spade Bucket

868
New 3/4 CY Concrete Placement Bucket

869
New 76" Single Cylinder Skeleton Grapple Bucket
New 76" Single Cylinder Skeleton Grapple Bucket

870
New 76" Single Cylinder Skeleton Grapple Bucket
New 76" Single Cylinder Skeleton Grapple Bucket

871
New Skid Steer 70" Root Rake
New Skid Steer 70" Root Rake

872
New Skid Steer Brush Mower

873
New Skid Steer Rock Bucket 84"
New Skid Steer Rock Bucket 84"

874
New Skid Steer Rock Bucket 78"
New Skid Steer Rock Bucket 78"

875
New Skid Steer Rock Bucket 74"
New Skid Steer Rock Bucket 74"

876
New Skid Steer Rock Bucket 68"
New Skid Steer Rock Bucket 68"

877
New Skid Steer Root Grapple 80"
New Skid Steer Root Grapple 80"

878
New Skid Steer Root Grapple 70"
New Skid Steer Root Grapple 70"

879
New Skid Steer Rock & Brush Grapple 84''
New Skid Steer Rock & Brush Grapple 84''

880
New Skid Steer Rock & Brush Grapple 78''
New Skid Steer Rock & Brush Grapple 78''

881
New Skid Steer Rock & Brush Grapple 74''
New Skid Steer Rock & Brush Grapple 74''

882
New Skid Steer Rock & Brush Grapple 68''
New Skid Steer Rock & Brush Grapple 68''

883
New Skid Steer Attach Frame

884
New Skid Steer Attach Frame

885
New Skid Steer Attach Frame

886
New Skid Steer Attach Frame

887
New Skid Steer Attach Frame

888
New Skid Steer Attach Frame

889
New Skid Steer Attach Frame

890
New Skid Steer Attach Frame

891
New Skid Steer Attach Frame

892
New Skid Steer Attach Frame

893
New Skid Steer Attach Frame

894
New Skid Steer Attach Frame

895
New Skid Steer Snow Pusher 8'
New Skid Steer Snow Pusher 8'

896
New Skid Steer Snow Pusher 6'
New Skid Steer Snow Pusher 6'

897
New 72" Class 2 Fork Lift Fork Set of 2, 5500lb Cap Per Fork
New 72" Class 2 Fork Lift Fork Set of 2, 5500lb Cap Per Fork

898
New 84" Light Duty Fork Extensions
New 84" Light Duty Fork Extensions

899
New 84" Light Duty Fork Extensions
New 84" Light Duty Fork Extensions

900
New Skid Steer Plate With Guard

901
New Skid Steer Plate With Guard

902
New Skid Steer Plate With Guard

903
New Fork Frame 48" For Skid Steer
New Fork Frame 48" For Skid Steer

904
New Fork Frame 48" For Skid Steer
New Fork Frame 48" For Skid Steer

905
New Fork Frame 48" For Skid Steer
New Fork Frame 48" For Skid Steer

906
New Fork Frame 48" For Skid Steer
New Fork Frame 48" For Skid Steer

907
New Skid Steer 76" Skeleton Bucket High Sides
New Skid Steer 76" Skeleton Bucket High Sides

908
New Skid Steer 76" Skeleton Bucket High Sides
New Skid Steer 76" Skeleton Bucket High Sides

909
New Skid Steer 72" Bucket With Teeth
New Skid Steer 72" Bucket With Teeth

910
New Skid Steer 72" Bucket With Teeth
New Skid Steer 72" Bucket With Teeth

911
New Skid Steer 78" Bucket With Blade
New Skid Steer 78" Bucket With Blade

912
New Skid Steer 78" Bucket With Blade
New Skid Steer 78" Bucket With Blade

913
New Skid Steer 66" Bucket With Blade
New Skid Steer 66" Bucket With Blade

914
New Skid Steer 66" Bucket With Blade
New Skid Steer 66" Bucket With Blade

915
New Skid Steer 90" Snow Bucket
New Skid Steer 90" Snow Bucket

916
New Skid Steer 90" Snow Bucket
New Skid Steer 90" Snow Bucket

917
New Skid Steer 78" Single Cylinder Grapple Bucket
New Skid Steer 78" Single Cylinder Grapple Bucket

918
New Skid Steer 78" Single Cylinder Grapple Bucket
New Skid Steer 78" Single Cylinder Grapple Bucket

919
New Skid Steer Quick Attach Plate

920
New Skid Steer Quick Attach Plate

921
New Skid Steer Quick Attach Plate

922
New Skid Steer Quick Attach Plate

923
New Skid Steer Quick Attach Plate

924
New Skid Steer Quick Attach Plate

925
New Skid Steer Quick Attach Plate

926
New Skid Steer Quick Attach Plate

927
New Pallet Fork Extensions Light Duty

928
New Pallet Fork Extensions Light Duty

929
New Skid Steer Receiver Hitch Trailer Mover

930
New Skid Steer Receiver Hitch Trailer Mover

931
Skid Steer Power Broom
Skid Steer Power Broom, 68" wide, good bristles, needs chain.

932
3-Point Disc
3-Point Disc, 72'' wide appears to be in decent condition. 

933
Rotary Hoe
Rotary Hoe that is 14'6'' wide and attaches with 3-point hitch. 

934
V-Blade
V-blade is approximately 8' wide unknown fitmentÂ