Bridger Coaches Manufacturing Online-Only Auction
Previous Page Listing ID#: 1276529

Auction Location

Newport, AR 72112
Auction Dates and TimesSALE IS COMPLETED
Bidding Starts: Tuesday Mar 30
Bidding Ends: Tuesday Mar 30
Auction Type
 Online Auction  VIEW ONLINE CATALOG
Company Information
Witcher Auctions, LLC

Website: www.witcherauctions.com

GoToAuction.com ID#: 4552
View company information and listings

Free Email Notifications

Sign up for the GoToAuction.com email notifications and we will let you know about sales in your area!  You may set up alerts by area (zip and radius), keywords, and by company.  It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions
PAYMENT. 10% Buyer's premium on all purchases. No cap. For example if you purchase an item for $100 your invoice will be for $110. If you purchase an item for $10,000 your invoice will be for $11,000. No exceptions. Figured per item. At the close of the lot, the high bidder will have purchased the offered lot. All sales are final upon the closing of the lot. The purchase is subject to all terms and conditions set forth herein. The purchaser assumes full responsibility / liability thereof. The purchaser further agrees to pay the Total Amount Due within 48 hours after closing of lots. Payment will not be accepted at the equipment location. All items must be paid for by wire transfer, credit card or certified funds delivered to our office in Wynne, Arkansas. Purchasers paying by credit card may contact Witcher Auctions and provide credit card info by phone or in person at our office in Wynne, AR. ALL ITEMS PAID FOR VIA CREDIT or DEBIT CARD WILL BE SUBJECT TO AN ADDITIONAL 5% CONVENIENCE FEE. NO ITEM WILL BE RELEASED WITHOUT RECEIPT OF PAYMENT IN FULL. YOU MUST PRESENT A PAID RECEIPT IN ORDER TO LOADOUT YOUR ITEMS. Witcher Auctions staff will be onsite to check invoices at load out. FAILURE TO PAY YOUR INVOICE AFTER 48 HOURS WILL RESULT IN YOU CREDIT CARD ON FILE BEING CHARGED IN FULL INCLUDING THE 5% CONVENIENCE FEE. NO SALES TAX. ITEM REMOVAL/PICK UP: Each item "MUST" be picked up Friday, April 2 or Saturday, April 3, 8:30am - 4:30pm. THESE ARE THE ONLY DAYS TO PICKUP / REMOVE YOUR PURCHASES. If you cannot remove / pickup your items on these two days please do not bid. On large metal working machines that may require proffesional rigging services or more time for dismantling we will work with the buyer to remove by appointment only. Large machinery load out and removal will be the sole responsibility of the buyer. We will have a small warehouse forklift on-site to assist with loadout. Loadout assistance by auction staff will be limited. All items that will be loaded by hand will be the sole responsibility of the buyer to load, secure and haul away. This is a very large facility. Please be prepared to load your own purchases. Bring the appropriate truck, trailer, dolly, pallet jack, extra people, tools etc to remove your purchases. Most areas are directly accessible via large overhead roll up doors. The entire facility is concrete and surrounded by asphalt or gravel.
Listing Information
Complete liquidation of former Bridger Coaches / Taylor Made Ambulances Manufacturing Facility. Metal working equipment, press brakes, Metal Muncher, welders, 100 KW diesel generator, industrial air compressors, upholstery equipment, paint booths, hundreds of pcs of dimensional aluminum stock, table saws, office furniture, shop tables, full parts room etc. *Witcher Auctions is providing a licensed electrician to unhook power from hardwired machinery after preview day at NO additional expense to the buyer. Preview Day is Monday March 29th from 12 noon to 4:30 pm CST. Pickup day for purchases will be Friday April 2nd and Saturday April 3rd ONLY! You must pickup your purchases on these two days. Warehouse forklift onsite to assist with load out. Items too heavy or too large for our forklift to lift wil be the sole responsibility of the buyer to load / remove. This facility is over 50,000 square feet and most areas are directly accessible via large overhead roll up doors. Please bring ample extra people, dollies, carts, boxes etc that you may need to remove your purchases. Witcher Auctions LLC will not hand load your items for you. In person preview is highly recommended before bidding. All sales are final.

1
Miller Regency 200 Welder w/ Spool Gun
480V, 3 phase *located in fabrication shop

2
Miller Regency 250 Welder w/ Spool Gun
480V, 3 phase *located in fabrication shop

3
Miller Regency 200 Arc Welder
200/230V, single phase *leads as pictured *located in fabrication shop

4
Airco 250amp DC Rectifier Welder
480V, 3 phase *located in fabrication shop

5
Metal Muncher Model# MM9018 Ironworker
480V, 3 phase, 86-ton max punch configuration, 9'L x 68"W x 91"T, s/n: 7032180 *comes w/ all parts & dies as pictured *located in fabrication shop *Witcher Auctions is providing a licensed electrician to unhook power from hardwired machinery after pr...

6
Industrial Machinery US8810 Hydraulic Press Brake
SICK C4000 accessory, computer display, foot control, s/n: W2008-014 *BUYER IS RESPONSIBLE FOR DISASSEMBLY, LOADING, & REMOVAL *Witcher Auctions is providing a licensed electrician to unhook power from hardwired machinery after preview day at NO addi...

7
Roper Whitney Co Pexto Model 10M14 Electric Shear
14ga capacity, 10' max length capacity, s/n: 177595 *located in fabrication shop *Witcher Auctions is providing a licensed electrician to unhook power from hardwired machinery after preview day at NO additional expense to the buyer.

8
Chicago BPU1014-6 Manual Press / Bending Brake
10' max length capacity, s/n: 326404T *located in fabrication shop

9
Vertical Electric / Hydraulic Punch Press
w/ table, two adjustable guide steps, 230V, single phase, foot control *located in fabrication shop *Witcher Auctions is providing a licensed electrician to unhook power from hardwired machinery after preview day at NO additional expense to the buyer...

10
Baldor Industrial Pedestal Buffer
54" tall to top of control switch box, 15"D x 3.5" wide buffing wheels *no data plate *located in fabrication shop *Witcher Auctions is providing a licensed electrician to unhook power from hardwired machinery after preview day at NO additional expen...


12
Bliss C45 45-Ton Vertial Punch Press
480V, 3 phase electric, 104"T, 5' x 4' overall dimensions, s/n: H51774 *BUYER RESPONSIBLE FOR LOADING & REMOVAL *located in fabrication shop *Witcher Auctions is providing a licensed electrician to unhook power from hardwired machinery after preview ...

13
Bliss C45 45-Ton Vertical Punch Press
106"T, 5' x 4' overall dimensions, s/n: H58029 *BUYER RESPONSIBLE FOR LOADING & REMOVAL *located in fabrication shop *Witcher Auctions is providing a licensed electrician to unhook power from hardwired machinery after preview day at NO additional exp...

14
Jet 3-Ton Overhead Electric Chain Hoist w/ Trolley
26'L crossbeam, electric travel *ONLY CROSSBEAM SELLS w/ HOIST, track is attached to building, track is not inculded **BUYER IS RESPONSIBLE FOR TEAR DOWN, DISASSEMBLY & REMOVAL *Witcher Auctions is providing a licensed electrician to unhook power fro...

15
36' L x 13'W x 12' T Free Standing Paint Booth
12' T center height, 9'6" door opening, back-lit, fan exhaust, two walk thru doors *BUYER is responsible for disassembly removal *direct access to this bay by large overhead roll up door *located in south east paint shop *Witcher Auctions is providi...

16
26'L x 14' W x 9'T Free Standing Paint Booth
inside dimensions: 26'L x 14'W x 9'T center, 118" front door opening, back-lit lighting, ventilation *BUYER RESPONSIBLE FOR TEAR DOWN & REMOVAL *Witcher Auctions is providing a licensed electrician to unhook power from hardwired machinery after prev...

17
Dewalt DW715 12" Compound Miter Saw w/ Table
table- 225"L x 24"D x 36"T, steel table w/ aluminum accessories, material rack, removable chip tray, & rear deflector *located in fabrication shop

18
Dewalt DW713 10" Compound Miter Saw w/ Table
16'L x 25"D x 36"T, table is two pieces, built out of mostly steel, second piece is built out of aluminum, c/w steel rack attached on backside *located in fabrication shop

19
Metal Devil 14" Metal Chop Saw w/ Aluminum Table
table- 20'L x 17 1/2"D x 34"T *steel in picture on ground sell separately *located in fabrication shop

20
Northern Industrial 6-Speed Floor Drill Press
120V, single phase, 1hp max, 3/4" chuck, vise *located in fabrication shop

21
*Salvage* 30' L x 14' W Free Standing Paint Booth
14'W x 30'L, comes w/ racks located inside booth only. *Buyer is responsible for teardown / removal *Unit has roof damage, sold as is, where is *this bay is directly accessible via large overhead roll up door *Witcher Auctions is providing a licensed...

22
Magna Plus 100KW Cummins Diesel Generator
Model Number: 362PSL166 Serial Number: LM-314235-0198 Hours: 59 showing on meter 6cyl Cummins Turbo diesel engine, 3 phase, skid mounted w/ built in fuel tank, enclosed cabinet, almost full tank of fuel, comes w/ transfer switch located inside on Nor...

22
Large Lot of Cabinet Hardware
Located under miter saw table in cabinet shop *Contents ONLY, miter saw / table sold separately

23
Sullair Electric Industrial Air Compressor
Model Number: 10B-30-AD Serial Number: 003-68374 8,116 hours, skid mounted, 3 phase electric *Located out back in generator room *Witcher Auctions is providing a licensed electrician to unhook power from hardwired machinery after preview day at NO a...

24
20 HP Electric Industrial Air Compressor
Twin Cylinders, 3 phase, 480V, w/ tank, skid mounted *Located in generator room in back lot *Witcher Auctions is providing a licensed electrician to unhook power from hardwired machinery after preview day at NO additional expense to the buyer.

25
Lot of Compressor Oil
Drum is nearly full, tag says Shell Tellus Oil 46 *located in generator house in back lot

26
KBC Metal Cutting Bandsaw
*NO MOTOR Located in back lot in generator room

26
MSC Metal Cutting Band Saw
110V, single phase Located in storage room in back lot

27
GMC 7000 Diesel S/A Bob Truck w/ Hoist
Detroit 6cyl Turbo diesel engine, twin hoist, two speed rear end, Chelsea PTO NO KEY, NO TITLE, NOT RUNNING, SOLD AS IS, WHERE IS, FOR PARTS OR REPAIR AS PICTURED *located in back lot Mileage/Hours: UNKNOWN VIN: T17DD9V624311 NO TITLE

28
Large Lot of Unused Dimensional Steel Stock
Comes w/ (2) racks Angle iron , flat iron, pipe, tubing, huge lot of unused steel all for one money. *located outside on North of back lot

29
Lot of Disassembled Pallet Racking
Located outside on North end of back lot

30
Spreader Bar For Lifting Ambulance Bodies
Located outside on North End back lot

31
Lot of (16) Various Sized Shop Fans
*Located outside beside warehouse in back lot

32
Complete Contents Outside Warehouse
power mirrors, new steel truck wheels, automotive parts, stainless steel grab bars etc *located in back lot warehouse *Shop Fans sold separately

32
Lot of Misc. Emergency Light Bars, Truck Seats Etc
*Located in storage building in back lot

32
Contents of Parts Room in Back Lot
Located in storage room in back lot

33
Misc Scrap / Salvage Items in Back Lot
* all items pictured sell as one group for one money.

34
Ultra Air Refrigerated Air Dryer
Model Number: UA125AC Serial Number: U-19151 R134A Refrigerant, Single Phase, 115V *located on North wall of Admin Building

35
1997 Komatsu 25 Pneumatic Tire Forklift
LP gas engine, pneumatic tires, side shift, shuttle shift., 4660 lb lift capacity We used this lift for auction setup. Cranks, runs, drives, lifts, no brakes, Comes with propane bottle pictured. S/N: 46709A HRS: UNKNOWN

36
Champion 15HP Industrial Air Compressor
Model Number: HRA15-12 Serial Number: 770 Pump Model Number: R40A 3 phase, 480v, skid mounted *Witcher Auctions is providing a licensed electrician to unhook power from hardwired machinery after preview day at NO additional expense to the buyer. *lo...

37
Gardner Denver Electrascrew Air Compressor
30HP, 3 phase electric motor, fork tubes 62" L x 35" W x 64" T *located in electrical shop compressor room *Witcher Auctions is providing a licensed electrician to unhook power from hardwired machinery after preview day at NO additional expense to ...

38
Gardner Denver Refrigerated Air Dryer
Model Number: 700053 Serial Number: 03-05-96-5998 230V, single phase *located in electrical shop compressor room

39
Saw Stop 10" Industrial 5HP Table Saw
Model Number: ICS53480 Serial Number: 1092305660 480V, 3 phase, 3,450 RPM w/extra table, fence Saw Measures 7' L x 36" D x 34" T *located in cabinet shop

40
Saw Stop 10" 5hp Industrial Table Saw
Model Number: ICS53480 Serial Number: 1092305663 480V, 3 phase, 3,450 RPM, 5HP Fence Saw Measures 84" L x 36" D x 34" T *located in cabinet shop

41
Saw Stop 10" 5hp Industrial Table Saw
Model Number: ICS53480 Serial Number: 1092205627 84" L x 36" D x 34" T 480V, 3 Phase, 5HP, 3,450RPM *located in cabinet shop

42
Saw Stop 10" 5hp Industrial Table Saw
Model Number: 1092305664 Serial Number: 1092305664 142" L x 36" D x 34" T 480V, 3 phase, 5HP, 3,450 RPM *located in cabinet shop

43
Saw Stop 10" 5hp Industrial Table Saw
Serial Number: 1092305667 480V, 3 phase, 5H, 3,450 RPM, fence 84"L x 36"D x 34"T *Located in Finish Shop

43
Saw Stop 10" 5HP Industrial Table Saw
*parts missing, sold as is, where is Located in storage room in back lot

43
Delta Rockwell 10" Table Saw
220V, single phase Located in storage room in back lot

44
2018 Shop Fox W166 2hp Dust Collector
Serial Number:24724 220V, single phase *located in cabinet shop

45
2010 Shop Fox W1666 2hp Dust Collector
Serial Number: 20371 220V, single phase *located in cabinet shop

46
2010 Shop Fox W1666 2hp Dust Collector
Serial Number: 20193 220V, single phase *located in cabinet shop

47
2018 Shop Fox W1666 2hp Dust Collector
Serial Number: 24731 220V, single phase *located in cabinet shop

48
Dewalt DW71 Compound Miter Saw w/Table
aluminum fence, 12' L x 32' D x 39" H *CONTENTS UNDER TABLE SOLD SEPARATELY *located in cabinet shop

49
Delta 2007 33-XL 17" Laser Drill Press
Single phase, 110/120V *located in cabinet shop

50
MSC Metal Cutting Band Saw
Model Number: 40051690 Serial Number: 514145 Single phase, 110/120V *located in cabinet shop

51
Delta Rockwall 37-220 Industrial Joiner
Single phase, 110/120V Serial Number: CR3159 *located in cabinet shop

52
Rockwell 31-520 6" Industrial Belt Sander
S/N G1-9351 *located in cabinet shop

53
Delta 33X2 17" Laser Drill Press
110V, single phase, light 70" Tall *located in electrical shop

54
Dewalt DW713 10" Compound Miter Saw w/ Table
Wooden table, aluminum fence 10"L x 31"D x 42" at fence bed *Located in Finish Shop

55
Bel-O-Vac Upholstery Forming Machine
single phase, 240V @ 70"W x 70"L x 70"H footprint dimensions *Located in Finish Shop

56
Juki Industrial Sewing Machine w/ Table
72" L x 38"W x 31" T at table height, 61" overall height, 110Volt *Located in Finish Shop

61
Rockwell Vertical Band Saw
Serial Number: 3693 66" tall, 110V, single phase *Located in Finish Shop






67
Aluminum Shop Work Table
129 1/2" L x 36" W x 37" T, wood top

68
(4) Aluminum Sheets
approx 1/8" thick, 24"W, 94"T


70
Unused Stainless Steel Piano Hinges
*various sizes, mostly 8'L


72
Aluminum Welding Table & Aluminum Shelf
table- 53"W x 83"L x 39"T, shelf- 84"L x 24"D x 42"T

73
Aluminum Shelf w/ Casters & Aluminum Welding Table
shelf- 100"L x 32"W x 41 1/2"T, table- 6'L x 3'W x 39"T

74
(3) Aluminum Racks
rack#1-68"L x 32"W x 40"T, rack#2- 31"L x 24"W x 67 1/2"T, rack#3- 49"L x 32"W x 46"T

75
Aluminum Welding Table & Aluminum Shelf
table- 37"W x 30"D x 37"T, shelf- 48"L x 19"D x 32"T

76
(3) Wooden Shelving Units w/ Contents
shelf #1-57"L x 24"D x 50"T, shelf #2-24"W x 18"D x 36"T, shelf #3-48"L x 25"D x 57"T

77
Large Lot of Scrap Aluminum
approx 12' x 10' x 4' pile size

78
Aluminum Tool Cart & Aluminum Shelf
cart- 32"W x 38"D x 48"T, shelf- 44'W x 24'D x 34'T

79
Aluminum Rack w/ Contents
steel 2" x 2" angle iron & 4" flat bar from 13"L-65"L

80
(13) Retractable Air Hose Reels
located in various locations in main fabrication shopng & fiberglass shop, air hose reels only! *BUYER IS RESPONSIBLE FOR TAKE DOWN, DISASSEMBLY & REMOVAL

81
(9) Retractable Electric Cord Reels
located in various locations in fabrication shop and fiberglass shop, electrical cord reels only! *BUYER IS RESPONSIBLE FOR TAKE DOWN, DISASSEMBLY & REMOVAL

82
(7) Overhead Infrared Gas Heaters
located in various locations in main mfg floor & north paint shop **BUYER IS RESPONSIBLE FOR DISASSEMBLY & REMOVAL


84
Roll of Copper Cable & Weather Stripping
Utrex VN TC-ER-JP 600V 16AWG, sun resistant direct burial *Remainder of 500' roll


86
(5) Rolling Steel Racks
78"L x 36"W x 91"T *size may vary slightly


88
(2)94"W x 170"L x 1/8" Thick Aluminum Sheets
approximately 1/8" thick, measured with tape


90
Eyewash Station
*BUYER RESPONSIBLE FOR REMOVAL


92
Lot of Various Sized Aluminum Flat Bar
2" x 2", 1 1/2" x 1 1/2", 1" x 1" angle, majority 20'L 4" x 1/2" flat, 10'L or more

93
Lot of Various Sized Aluminum Flat Bar
3" x 5/8", 2" x 1/4", 1" x 1/2", 3" x 3/8", etc

94
(24)Pcs Aluminum "C" Channel
2" x 3" x 20' & 1" x 2" x 20", some shorter pcs, majority is 20'L sticks



97
Various Sized Aluminum Square & Rectangular Tubing
sizes include 3/4" x 3/4", 2" x 2", 1" x 4", most is 20'L, shome short pieces as pictured, (1)pc 6" x 2" x 13" "C" channgel




101
@ (16) Pieces of Aluminum 4"x2"x20" "C" Channel
(14)pcs 20'L, (2)pcs 128", 112" each

102
@(59) Pieces of 14' Aluminum Extruded Body Corners
Mill Finish, 375" thickness *includes partial pieces pictured in addition to the 59pcs counted

103
Floor Material Rack
*RACK ONLY, CONTENTS SOLD SEPERATELY *Large Rack used to house aluminum stock







110
Contents of Wall Fabrication Office
Dell desktop computer, office chair, file cabinet, mini fridge, & misc office supplies *unattached contents only, located on West wall of main fab building

111
Contents of Wall Fabrication Shop Supply Closet
water cooler, misc parts supplies, (3) bx new bolts, grinding wheels *Unattached CONTENTS ONLY, NO SHELVING *located on west wall of main fabrication building

112
Contents of Pallet Rack Next to Fab Office
aluminum parts bins, body brackets, shocks, wiring harnesses, tail lights, hoses, etc *CONTENTS ONLY, PALLET RACK SOLD SEPARATELY

113
92"W x 36"D x 149"T Steel Pallet / Parts Rack
*SHELF ONLY, CONTENTS SOLD SEPARATELY

114
48"W x 17"D x 67 1/2"T Wooden Bolt Bin w/ Contents
contents include unused bolts, hardware, used parts, tow hooks, partial roll of cable

115
Lot of Dimensional Steel Stock
pipe, angle iron, flat bar, tubing, channel *various sizes up to 20'L


117
Double Sided Steel Storage Rack
overall dimensions 16'L x 8'W x 86"T *rack is welded to building in a small places **BUYER IS RESPONSIBLE FOR CUTTING LOOSE, BRING APPROPRIATE TOOLS / EQUIPMENT

118
Dayton 110V Fan
*BUYER IS RESPONSIBLE FOR REMOVAL

119
Lot of Aluminum Pre Fab Body Parts
*CONTENTS ONLY, SHELF SELLS SEPARATELY

120
90"L x 48"W x 84"T Steel Frame Shelf
3/4" plywood shelves *Shelf only, contents sold separately

121
Lot of Aluminum Pre Fab Body Parts
includes aluminum shelf unit

122
Steel Rack & Wooden Shelf
rack- 71"W x 37"D x 76"T, shelf- 91"W x 24"D x 96"T

123
Large Lot of Aluminum Scrap
9/L x 5'W x 3'T footprint




Auction License: 2100
Photo Gallery

Save Listing As Favorite

Print Listing information

Share This Listing

  • Facebook
  • Email this Listing to a Friend






Sponsored Links

Bridger Coaches Manufacturing Online-Only Auction

Witcher Auctions, LLC

Witcher Auctions, LLC


Contact:
Phone:
Sale Location
3700 Medallion
Newport, AR 72112
Sale Dates and Times
Sale Terms and Conditions
PAYMENT. 10% Buyer's premium on all purchases. No cap. For example if you purchase an item for $100 your invoice will be for $110. If you purchase an item for $10,000 your invoice will be for $11,000. No exceptions. Figured per item. At the close of the lot, the high bidder will have purchased the offered lot. All sales are final upon the closing of the lot. The purchase is subject to all terms and conditions set forth herein. The purchaser assumes full responsibility / liability thereof. The purchaser further agrees to pay the Total Amount Due within 48 hours after closing of lots. Payment will not be accepted at the equipment location. All items must be paid for by wire transfer, credit card or certified funds delivered to our office in Wynne, Arkansas. Purchasers paying by credit card may contact Witcher Auctions and provide credit card info by phone or in person at our office in Wynne, AR. ALL ITEMS PAID FOR VIA CREDIT or DEBIT CARD WILL BE SUBJECT TO AN ADDITIONAL 5% CONVENIENCE FEE. NO ITEM WILL BE RELEASED WITHOUT RECEIPT OF PAYMENT IN FULL. YOU MUST PRESENT A PAID RECEIPT IN ORDER TO LOADOUT YOUR ITEMS. Witcher Auctions staff will be onsite to check invoices at load out. FAILURE TO PAY YOUR INVOICE AFTER 48 HOURS WILL RESULT IN YOU CREDIT CARD ON FILE BEING CHARGED IN FULL INCLUDING THE 5% CONVENIENCE FEE. NO SALES TAX. ITEM REMOVAL/PICK UP: Each item "MUST" be picked up Friday, April 2 or Saturday, April 3, 8:30am - 4:30pm. THESE ARE THE ONLY DAYS TO PICKUP / REMOVE YOUR PURCHASES. If you cannot remove / pickup your items on these two days please do not bid. On large metal working machines that may require proffesional rigging services or more time for dismantling we will work with the buyer to remove by appointment only. Large machinery load out and removal will be the sole responsibility of the buyer. We will have a small warehouse forklift on-site to assist with loadout. Loadout assistance by auction staff will be limited. All items that will be loaded by hand will be the sole responsibility of the buyer to load, secure and haul away. This is a very large facility. Please be prepared to load your own purchases. Bring the appropriate truck, trailer, dolly, pallet jack, extra people, tools etc to remove your purchases. Most areas are directly accessible via large overhead roll up doors. The entire facility is concrete and surrounded by asphalt or gravel.
Listing Details
Complete liquidation of former Bridger Coaches / Taylor Made Ambulances Manufacturing Facility. Metal working equipment, press brakes, Metal Muncher, welders, 100 KW diesel generator, industrial air compressors, upholstery equipment, paint booths, hundreds of pcs of dimensional aluminum stock, table saws, office furniture, shop tables, full parts room etc. *Witcher Auctions is providing a licensed electrician to unhook power from hardwired machinery after preview day at NO additional expense to the buyer. Preview Day is Monday March 29th from 12 noon to 4:30 pm CST. Pickup day for purchases will be Friday April 2nd and Saturday April 3rd ONLY! You must pickup your purchases on these two days. Warehouse forklift onsite to assist with load out. Items too heavy or too large for our forklift to lift wil be the sole responsibility of the buyer to load / remove. This facility is over 50,000 square feet and most areas are directly accessible via large overhead roll up doors. Please bring ample extra people, dollies, carts, boxes etc that you may need to remove your purchases. Witcher Auctions LLC will not hand load your items for you. In person preview is highly recommended before bidding. All sales are final.

1
Miller Regency 200 Welder w/ Spool Gun
480V, 3 phase *located in fabrication shop

2
Miller Regency 250 Welder w/ Spool Gun
480V, 3 phase *located in fabrication shop

3
Miller Regency 200 Arc Welder
200/230V, single phase *leads as pictured *located in fabrication shop

4
Airco 250amp DC Rectifier Welder
480V, 3 phase *located in fabrication shop

5
Metal Muncher Model# MM9018 Ironworker
480V, 3 phase, 86-ton max punch configuration, 9'L x 68"W x 91"T, s/n: 7032180 *comes w/ all parts & dies as pictured *located in fabrication shop *Witcher Auctions is providing a licensed electrician to unhook power from hardwired machinery after pr...

6
Industrial Machinery US8810 Hydraulic Press Brake
SICK C4000 accessory, computer display, foot control, s/n: W2008-014 *BUYER IS RESPONSIBLE FOR DISASSEMBLY, LOADING, & REMOVAL *Witcher Auctions is providing a licensed electrician to unhook power from hardwired machinery after preview day at NO addi...

7
Roper Whitney Co Pexto Model 10M14 Electric Shear
14ga capacity, 10' max length capacity, s/n: 177595 *located in fabrication shop *Witcher Auctions is providing a licensed electrician to unhook power from hardwired machinery after preview day at NO additional expense to the buyer.

8
Chicago BPU1014-6 Manual Press / Bending Brake
10' max length capacity, s/n: 326404T *located in fabrication shop

9
Vertical Electric / Hydraulic Punch Press
w/ table, two adjustable guide steps, 230V, single phase, foot control *located in fabrication shop *Witcher Auctions is providing a licensed electrician to unhook power from hardwired machinery after preview day at NO additional expense to the buyer...

10
Baldor Industrial Pedestal Buffer
54" tall to top of control switch box, 15"D x 3.5" wide buffing wheels *no data plate *located in fabrication shop *Witcher Auctions is providing a licensed electrician to unhook power from hardwired machinery after preview day at NO additional expen...


12
Bliss C45 45-Ton Vertial Punch Press
480V, 3 phase electric, 104"T, 5' x 4' overall dimensions, s/n: H51774 *BUYER RESPONSIBLE FOR LOADING & REMOVAL *located in fabrication shop *Witcher Auctions is providing a licensed electrician to unhook power from hardwired machinery after preview ...

13
Bliss C45 45-Ton Vertical Punch Press
106"T, 5' x 4' overall dimensions, s/n: H58029 *BUYER RESPONSIBLE FOR LOADING & REMOVAL *located in fabrication shop *Witcher Auctions is providing a licensed electrician to unhook power from hardwired machinery after preview day at NO additional exp...

14
Jet 3-Ton Overhead Electric Chain Hoist w/ Trolley
26'L crossbeam, electric travel *ONLY CROSSBEAM SELLS w/ HOIST, track is attached to building, track is not inculded **BUYER IS RESPONSIBLE FOR TEAR DOWN, DISASSEMBLY & REMOVAL *Witcher Auctions is providing a licensed electrician to unhook power fro...

15
36' L x 13'W x 12' T Free Standing Paint Booth
12' T center height, 9'6" door opening, back-lit, fan exhaust, two walk thru doors *BUYER is responsible for disassembly removal *direct access to this bay by large overhead roll up door *located in south east paint shop *Witcher Auctions is providi...

16
26'L x 14' W x 9'T Free Standing Paint Booth
inside dimensions: 26'L x 14'W x 9'T center, 118" front door opening, back-lit lighting, ventilation *BUYER RESPONSIBLE FOR TEAR DOWN & REMOVAL *Witcher Auctions is providing a licensed electrician to unhook power from hardwired machinery after prev...

17
Dewalt DW715 12" Compound Miter Saw w/ Table
table- 225"L x 24"D x 36"T, steel table w/ aluminum accessories, material rack, removable chip tray, & rear deflector *located in fabrication shop

18
Dewalt DW713 10" Compound Miter Saw w/ Table
16'L x 25"D x 36"T, table is two pieces, built out of mostly steel, second piece is built out of aluminum, c/w steel rack attached on backside *located in fabrication shop

19
Metal Devil 14" Metal Chop Saw w/ Aluminum Table
table- 20'L x 17 1/2"D x 34"T *steel in picture on ground sell separately *located in fabrication shop

20
Northern Industrial 6-Speed Floor Drill Press
120V, single phase, 1hp max, 3/4" chuck, vise *located in fabrication shop

21
*Salvage* 30' L x 14' W Free Standing Paint Booth
14'W x 30'L, comes w/ racks located inside booth only. *Buyer is responsible for teardown / removal *Unit has roof damage, sold as is, where is *this bay is directly accessible via large overhead roll up door *Witcher Auctions is providing a licensed...

22
Magna Plus 100KW Cummins Diesel Generator
Model Number: 362PSL166 Serial Number: LM-314235-0198 Hours: 59 showing on meter 6cyl Cummins Turbo diesel engine, 3 phase, skid mounted w/ built in fuel tank, enclosed cabinet, almost full tank of fuel, comes w/ transfer switch located inside on Nor...

22
Large Lot of Cabinet Hardware
Located under miter saw table in cabinet shop *Contents ONLY, miter saw / table sold separately

23
Sullair Electric Industrial Air Compressor
Model Number: 10B-30-AD Serial Number: 003-68374 8,116 hours, skid mounted, 3 phase electric *Located out back in generator room *Witcher Auctions is providing a licensed electrician to unhook power from hardwired machinery after preview day at NO a...

24
20 HP Electric Industrial Air Compressor
Twin Cylinders, 3 phase, 480V, w/ tank, skid mounted *Located in generator room in back lot *Witcher Auctions is providing a licensed electrician to unhook power from hardwired machinery after preview day at NO additional expense to the buyer.

25
Lot of Compressor Oil
Drum is nearly full, tag says Shell Tellus Oil 46 *located in generator house in back lot

26
KBC Metal Cutting Bandsaw
*NO MOTOR Located in back lot in generator room

26
MSC Metal Cutting Band Saw
110V, single phase Located in storage room in back lot

27
GMC 7000 Diesel S/A Bob Truck w/ Hoist
Detroit 6cyl Turbo diesel engine, twin hoist, two speed rear end, Chelsea PTO NO KEY, NO TITLE, NOT RUNNING, SOLD AS IS, WHERE IS, FOR PARTS OR REPAIR AS PICTURED *located in back lot Mileage/Hours: UNKNOWN VIN: T17DD9V624311 NO TITLE

28
Large Lot of Unused Dimensional Steel Stock
Comes w/ (2) racks Angle iron , flat iron, pipe, tubing, huge lot of unused steel all for one money. *located outside on North of back lot

29
Lot of Disassembled Pallet Racking
Located outside on North end of back lot

30
Spreader Bar For Lifting Ambulance Bodies
Located outside on North End back lot

31
Lot of (16) Various Sized Shop Fans
*Located outside beside warehouse in back lot

32
Complete Contents Outside Warehouse
power mirrors, new steel truck wheels, automotive parts, stainless steel grab bars etc *located in back lot warehouse *Shop Fans sold separately

32
Lot of Misc. Emergency Light Bars, Truck Seats Etc
*Located in storage building in back lot

32
Contents of Parts Room in Back Lot
Located in storage room in back lot

33
Misc Scrap / Salvage Items in Back Lot
* all items pictured sell as one group for one money.

34
Ultra Air Refrigerated Air Dryer
Model Number: UA125AC Serial Number: U-19151 R134A Refrigerant, Single Phase, 115V *located on North wall of Admin Building

35
1997 Komatsu 25 Pneumatic Tire Forklift
LP gas engine, pneumatic tires, side shift, shuttle shift., 4660 lb lift capacity We used this lift for auction setup. Cranks, runs, drives, lifts, no brakes, Comes with propane bottle pictured. S/N: 46709A HRS: UNKNOWN

36
Champion 15HP Industrial Air Compressor
Model Number: HRA15-12 Serial Number: 770 Pump Model Number: R40A 3 phase, 480v, skid mounted *Witcher Auctions is providing a licensed electrician to unhook power from hardwired machinery after preview day at NO additional expense to the buyer. *lo...

37
Gardner Denver Electrascrew Air Compressor
30HP, 3 phase electric motor, fork tubes 62" L x 35" W x 64" T *located in electrical shop compressor room *Witcher Auctions is providing a licensed electrician to unhook power from hardwired machinery after preview day at NO additional expense to ...

38
Gardner Denver Refrigerated Air Dryer
Model Number: 700053 Serial Number: 03-05-96-5998 230V, single phase *located in electrical shop compressor room

39
Saw Stop 10" Industrial 5HP Table Saw
Model Number: ICS53480 Serial Number: 1092305660 480V, 3 phase, 3,450 RPM w/extra table, fence Saw Measures 7' L x 36" D x 34" T *located in cabinet shop

40
Saw Stop 10" 5hp Industrial Table Saw
Model Number: ICS53480 Serial Number: 1092305663 480V, 3 phase, 3,450 RPM, 5HP Fence Saw Measures 84" L x 36" D x 34" T *located in cabinet shop

41
Saw Stop 10" 5hp Industrial Table Saw
Model Number: ICS53480 Serial Number: 1092205627 84" L x 36" D x 34" T 480V, 3 Phase, 5HP, 3,450RPM *located in cabinet shop

42
Saw Stop 10" 5hp Industrial Table Saw
Model Number: 1092305664 Serial Number: 1092305664 142" L x 36" D x 34" T 480V, 3 phase, 5HP, 3,450 RPM *located in cabinet shop

43
Saw Stop 10" 5hp Industrial Table Saw
Serial Number: 1092305667 480V, 3 phase, 5H, 3,450 RPM, fence 84"L x 36"D x 34"T *Located in Finish Shop

43
Saw Stop 10" 5HP Industrial Table Saw
*parts missing, sold as is, where is Located in storage room in back lot

43
Delta Rockwell 10" Table Saw
220V, single phase Located in storage room in back lot

44
2018 Shop Fox W166 2hp Dust Collector
Serial Number:24724 220V, single phase *located in cabinet shop

45
2010 Shop Fox W1666 2hp Dust Collector
Serial Number: 20371 220V, single phase *located in cabinet shop

46
2010 Shop Fox W1666 2hp Dust Collector
Serial Number: 20193 220V, single phase *located in cabinet shop

47
2018 Shop Fox W1666 2hp Dust Collector
Serial Number: 24731 220V, single phase *located in cabinet shop

48
Dewalt DW71 Compound Miter Saw w/Table
aluminum fence, 12' L x 32' D x 39" H *CONTENTS UNDER TABLE SOLD SEPARATELY *located in cabinet shop

49
Delta 2007 33-XL 17" Laser Drill Press
Single phase, 110/120V *located in cabinet shop

50
MSC Metal Cutting Band Saw
Model Number: 40051690 Serial Number: 514145 Single phase, 110/120V *located in cabinet shop

51
Delta Rockwall 37-220 Industrial Joiner
Single phase, 110/120V Serial Number: CR3159 *located in cabinet shop

52
Rockwell 31-520 6" Industrial Belt Sander
S/N G1-9351 *located in cabinet shop

53
Delta 33X2 17" Laser Drill Press
110V, single phase, light 70" Tall *located in electrical shop

54
Dewalt DW713 10" Compound Miter Saw w/ Table
Wooden table, aluminum fence 10"L x 31"D x 42" at fence bed *Located in Finish Shop

55
Bel-O-Vac Upholstery Forming Machine
single phase, 240V @ 70"W x 70"L x 70"H footprint dimensions *Located in Finish Shop

56
Juki Industrial Sewing Machine w/ Table
72" L x 38"W x 31" T at table height, 61" overall height, 110Volt *Located in Finish Shop

61
Rockwell Vertical Band Saw
Serial Number: 3693 66" tall, 110V, single phase *Located in Finish Shop






67
Aluminum Shop Work Table
129 1/2" L x 36" W x 37" T, wood top

68
(4) Aluminum Sheets
approx 1/8" thick, 24"W, 94"T


70
Unused Stainless Steel Piano Hinges
*various sizes, mostly 8'L


72
Aluminum Welding Table & Aluminum Shelf
table- 53"W x 83"L x 39"T, shelf- 84"L x 24"D x 42"T

73
Aluminum Shelf w/ Casters & Aluminum Welding Table
shelf- 100"L x 32"W x 41 1/2"T, table- 6'L x 3'W x 39"T

74
(3) Aluminum Racks
rack#1-68"L x 32"W x 40"T, rack#2- 31"L x 24"W x 67 1/2"T, rack#3- 49"L x 32"W x 46"T

75
Aluminum Welding Table & Aluminum Shelf
table- 37"W x 30"D x 37"T, shelf- 48"L x 19"D x 32"T

76
(3) Wooden Shelving Units w/ Contents
shelf #1-57"L x 24"D x 50"T, shelf #2-24"W x 18"D x 36"T, shelf #3-48"L x 25"D x 57"T

77
Large Lot of Scrap Aluminum
approx 12' x 10' x 4' pile size

78
Aluminum Tool Cart & Aluminum Shelf
cart- 32"W x 38"D x 48"T, shelf- 44'W x 24'D x 34'T

79
Aluminum Rack w/ Contents
steel 2" x 2" angle iron & 4" flat bar from 13"L-65"L

80
(13) Retractable Air Hose Reels
located in various locations in main fabrication shopng & fiberglass shop, air hose reels only! *BUYER IS RESPONSIBLE FOR TAKE DOWN, DISASSEMBLY & REMOVAL

81
(9) Retractable Electric Cord Reels
located in various locations in fabrication shop and fiberglass shop, electrical cord reels only! *BUYER IS RESPONSIBLE FOR TAKE DOWN, DISASSEMBLY & REMOVAL

82
(7) Overhead Infrared Gas Heaters
located in various locations in main mfg floor & north paint shop **BUYER IS RESPONSIBLE FOR DISASSEMBLY & REMOVAL


84
Roll of Copper Cable & Weather Stripping
Utrex VN TC-ER-JP 600V 16AWG, sun resistant direct burial *Remainder of 500' roll


86
(5) Rolling Steel Racks
78"L x 36"W x 91"T *size may vary slightly


88
(2)94"W x 170"L x 1/8" Thick Aluminum Sheets
approximately 1/8" thick, measured with tape


90
Eyewash Station
*BUYER RESPONSIBLE FOR REMOVAL


92
Lot of Various Sized Aluminum Flat Bar
2" x 2", 1 1/2" x 1 1/2", 1" x 1" angle, majority 20'L 4" x 1/2" flat, 10'L or more

93
Lot of Various Sized Aluminum Flat Bar
3" x 5/8", 2" x 1/4", 1" x 1/2", 3" x 3/8", etc

94
(24)Pcs Aluminum "C" Channel
2" x 3" x 20' & 1" x 2" x 20", some shorter pcs, majority is 20'L sticks



97
Various Sized Aluminum Square & Rectangular Tubing
sizes include 3/4" x 3/4", 2" x 2", 1" x 4", most is 20'L, shome short pieces as pictured, (1)pc 6" x 2" x 13" "C" channgel




101
@ (16) Pieces of Aluminum 4"x2"x20" "C" Channel
(14)pcs 20'L, (2)pcs 128", 112" each

102
@(59) Pieces of 14' Aluminum Extruded Body Corners
Mill Finish, 375" thickness *includes partial pieces pictured in addition to the 59pcs counted

103
Floor Material Rack
*RACK ONLY, CONTENTS SOLD SEPERATELY *Large Rack used to house aluminum stock







110
Contents of Wall Fabrication Office
Dell desktop computer, office chair, file cabinet, mini fridge, & misc office supplies *unattached contents only, located on West wall of main fab building

111
Contents of Wall Fabrication Shop Supply Closet
water cooler, misc parts supplies, (3) bx new bolts, grinding wheels *Unattached CONTENTS ONLY, NO SHELVING *located on west wall of main fabrication building

112
Contents of Pallet Rack Next to Fab Office
aluminum parts bins, body brackets, shocks, wiring harnesses, tail lights, hoses, etc *CONTENTS ONLY, PALLET RACK SOLD SEPARATELY

113
92"W x 36"D x 149"T Steel Pallet / Parts Rack
*SHELF ONLY, CONTENTS SOLD SEPARATELY

114
48"W x 17"D x 67 1/2"T Wooden Bolt Bin w/ Contents
contents include unused bolts, hardware, used parts, tow hooks, partial roll of cable

115
Lot of Dimensional Steel Stock
pipe, angle iron, flat bar, tubing, channel *various sizes up to 20'L


117
Double Sided Steel Storage Rack
overall dimensions 16'L x 8'W x 86"T *rack is welded to building in a small places **BUYER IS RESPONSIBLE FOR CUTTING LOOSE, BRING APPROPRIATE TOOLS / EQUIPMENT

118
Dayton 110V Fan
*BUYER IS RESPONSIBLE FOR REMOVAL

119
Lot of Aluminum Pre Fab Body Parts
*CONTENTS ONLY, SHELF SELLS SEPARATELY

120
90"L x 48"W x 84"T Steel Frame Shelf
3/4" plywood shelves *Shelf only, contents sold separately

121
Lot of Aluminum Pre Fab Body Parts
includes aluminum shelf unit

122
Steel Rack & Wooden Shelf
rack- 71"W x 37"D x 76"T, shelf- 91"W x 24"D x 96"T

123
Large Lot of Aluminum Scrap
9/L x 5'W x 3'T footprint



Gallery Images Loading, Please Wait...
  • Home
  • Hire an Auction Company
  • Add Your Auction Company
  • Member Login
  • Contact Us
  • Desktop Site
Return
Bridger Coaches Manufacturing Online-Only Auction
 Online Only Auction
Auction Date(s)
Bidding Starts: Tuesday Mar 30
Bidding Ends: Tuesday Mar 30
Auction Location

Newport, AR 72112
Company
Witcher Auctions, LLC

Website: www.witcherauctions.com

Listing Terms and Conditions
PAYMENT. 10% Buyer's premium on all purchases. No cap. For example if you purchase an item for $100 your invoice will be for $110. If you purchase an item for $10,000 your invoice will be for $11,000. No exceptions. Figured per item. At the close of the lot, the high bidder will have purchased the offered lot. All sales are final upon the closing of the lot. The purchase is subject to all terms and conditions set forth herein. The purchaser assumes full responsibility / liability thereof. The purchaser further agrees to pay the Total Amount Due within 48 hours after closing of lots. Payment will not be accepted at the equipment location. All items must be paid for by wire transfer, credit card or certified funds delivered to our office in Wynne, Arkansas. Purchasers paying by credit card may contact Witcher Auctions and provide credit card info by phone or in person at our office in Wynne, AR. ALL ITEMS PAID FOR VIA CREDIT or DEBIT CARD WILL BE SUBJECT TO AN ADDITIONAL 5% CONVENIENCE FEE. NO ITEM WILL BE RELEASED WITHOUT RECEIPT OF PAYMENT IN FULL. YOU MUST PRESENT A PAID RECEIPT IN ORDER TO LOADOUT YOUR ITEMS. Witcher Auctions staff will be onsite to check invoices at load out. FAILURE TO PAY YOUR INVOICE AFTER 48 HOURS WILL RESULT IN YOU CREDIT CARD ON FILE BEING CHARGED IN FULL INCLUDING THE 5% CONVENIENCE FEE. NO SALES TAX. ITEM REMOVAL/PICK UP: Each item "MUST" be picked up Friday, April 2 or Saturday, April 3, 8:30am - 4:30pm. THESE ARE THE ONLY DAYS TO PICKUP / REMOVE YOUR PURCHASES. If you cannot remove / pickup your items on these two days please do not bid. On large metal working machines that may require proffesional rigging services or more time for dismantling we will work with the buyer to remove by appointment only. Large machinery load out and removal will be the sole responsibility of the buyer. We will have a small warehouse forklift on-site to assist with loadout. Loadout assistance by auction staff will be limited. All items that will be loaded by hand will be the sole responsibility of the buyer to load, secure and haul away. This is a very large facility. Please be prepared to load your own purchases. Bring the appropriate truck, trailer, dolly, pallet jack, extra people, tools etc to remove your purchases. Most areas are directly accessible via large overhead roll up doors. The entire facility is concrete and surrounded by asphalt or gravel.
Complete liquidation of former Bridger Coaches / Taylor Made Ambulances Manufacturing Facility. Metal working equipment, press brakes, Metal Muncher, welders, 100 KW diesel generator, industrial air compressors, upholstery equipment, paint booths, hundreds of pcs of dimensional aluminum stock, table saws, office furniture, shop tables, full parts room etc. *Witcher Auctions is providing a licensed electrician to unhook power from hardwired machinery after preview day at NO additional expense to the buyer. Preview Day is Monday March 29th from 12 noon to 4:30 pm CST. Pickup day for purchases will be Friday April 2nd and Saturday April 3rd ONLY! You must pickup your purchases on these two days. Warehouse forklift onsite to assist with load out. Items too heavy or too large for our forklift to lift wil be the sole responsibility of the buyer to load / remove. This facility is over 50,000 square feet and most areas are directly accessible via large overhead roll up doors. Please bring ample extra people, dollies, carts, boxes etc that you may need to remove your purchases. Witcher Auctions LLC will not hand load your items for you. In person preview is highly recommended before bidding. All sales are final.

1
Miller Regency 200 Welder w/ Spool Gun
480V, 3 phase *located in fabrication shop

2
Miller Regency 250 Welder w/ Spool Gun
480V, 3 phase *located in fabrication shop

3
Miller Regency 200 Arc Welder
200/230V, single phase *leads as pictured *located in fabrication shop

4
Airco 250amp DC Rectifier Welder
480V, 3 phase *located in fabrication shop

5
Metal Muncher Model# MM9018 Ironworker
480V, 3 phase, 86-ton max punch configuration, 9'L x 68"W x 91"T, s/n: 7032180 *comes w/ all parts & dies as pictured *located in fabrication shop *Witcher Auctions is providing a licensed electrician to unhook power from hardwired machinery after pr...

6
Industrial Machinery US8810 Hydraulic Press Brake
SICK C4000 accessory, computer display, foot control, s/n: W2008-014 *BUYER IS RESPONSIBLE FOR DISASSEMBLY, LOADING, & REMOVAL *Witcher Auctions is providing a licensed electrician to unhook power from hardwired machinery after preview day at NO addi...

7
Roper Whitney Co Pexto Model 10M14 Electric Shear
14ga capacity, 10' max length capacity, s/n: 177595 *located in fabrication shop *Witcher Auctions is providing a licensed electrician to unhook power from hardwired machinery after preview day at NO additional expense to the buyer.

8
Chicago BPU1014-6 Manual Press / Bending Brake
10' max length capacity, s/n: 326404T *located in fabrication shop

9
Vertical Electric / Hydraulic Punch Press
w/ table, two adjustable guide steps, 230V, single phase, foot control *located in fabrication shop *Witcher Auctions is providing a licensed electrician to unhook power from hardwired machinery after preview day at NO additional expense to the buyer...

10
Baldor Industrial Pedestal Buffer
54" tall to top of control switch box, 15"D x 3.5" wide buffing wheels *no data plate *located in fabrication shop *Witcher Auctions is providing a licensed electrician to unhook power from hardwired machinery after preview day at NO additional expen...

11

12
Bliss C45 45-Ton Vertial Punch Press
480V, 3 phase electric, 104"T, 5' x 4' overall dimensions, s/n: H51774 *BUYER RESPONSIBLE FOR LOADING & REMOVAL *located in fabrication shop *Witcher Auctions is providing a licensed electrician to unhook power from hardwired machinery after preview ...

13
Bliss C45 45-Ton Vertical Punch Press
106"T, 5' x 4' overall dimensions, s/n: H58029 *BUYER RESPONSIBLE FOR LOADING & REMOVAL *located in fabrication shop *Witcher Auctions is providing a licensed electrician to unhook power from hardwired machinery after preview day at NO additional exp...

14
Jet 3-Ton Overhead Electric Chain Hoist w/ Trolley
26'L crossbeam, electric travel *ONLY CROSSBEAM SELLS w/ HOIST, track is attached to building, track is not inculded **BUYER IS RESPONSIBLE FOR TEAR DOWN, DISASSEMBLY & REMOVAL *Witcher Auctions is providing a licensed electrician to unhook power fro...

15
36' L x 13'W x 12' T Free Standing Paint Booth
12' T center height, 9'6" door opening, back-lit, fan exhaust, two walk thru doors *BUYER is responsible for disassembly removal *direct access to this bay by large overhead roll up door *located in south east paint shop *Witcher Auctions is providi...

16
26'L x 14' W x 9'T Free Standing Paint Booth
inside dimensions: 26'L x 14'W x 9'T center, 118" front door opening, back-lit lighting, ventilation *BUYER RESPONSIBLE FOR TEAR DOWN & REMOVAL *Witcher Auctions is providing a licensed electrician to unhook power from hardwired machinery after prev...

17
Dewalt DW715 12" Compound Miter Saw w/ Table
table- 225"L x 24"D x 36"T, steel table w/ aluminum accessories, material rack, removable chip tray, & rear deflector *located in fabrication shop

18
Dewalt DW713 10" Compound Miter Saw w/ Table
16'L x 25"D x 36"T, table is two pieces, built out of mostly steel, second piece is built out of aluminum, c/w steel rack attached on backside *located in fabrication shop

19
Metal Devil 14" Metal Chop Saw w/ Aluminum Table
table- 20'L x 17 1/2"D x 34"T *steel in picture on ground sell separately *located in fabrication shop

20
Northern Industrial 6-Speed Floor Drill Press
120V, single phase, 1hp max, 3/4" chuck, vise *located in fabrication shop

21
*Salvage* 30' L x 14' W Free Standing Paint Booth
14'W x 30'L, comes w/ racks located inside booth only. *Buyer is responsible for teardown / removal *Unit has roof damage, sold as is, where is *this bay is directly accessible via large overhead roll up door *Witcher Auctions is providing a licensed...

22
Magna Plus 100KW Cummins Diesel Generator
Model Number: 362PSL166 Serial Number: LM-314235-0198 Hours: 59 showing on meter 6cyl Cummins Turbo diesel engine, 3 phase, skid mounted w/ built in fuel tank, enclosed cabinet, almost full tank of fuel, comes w/ transfer switch located inside on Nor...

22
Large Lot of Cabinet Hardware
Located under miter saw table in cabinet shop *Contents ONLY, miter saw / table sold separately

23
Sullair Electric Industrial Air Compressor
Model Number: 10B-30-AD Serial Number: 003-68374 8,116 hours, skid mounted, 3 phase electric *Located out back in generator room *Witcher Auctions is providing a licensed electrician to unhook power from hardwired machinery after preview day at NO a...

24
20 HP Electric Industrial Air Compressor
Twin Cylinders, 3 phase, 480V, w/ tank, skid mounted *Located in generator room in back lot *Witcher Auctions is providing a licensed electrician to unhook power from hardwired machinery after preview day at NO additional expense to the buyer.

25
Lot of Compressor Oil
Drum is nearly full, tag says Shell Tellus Oil 46 *located in generator house in back lot

26
KBC Metal Cutting Bandsaw
*NO MOTOR Located in back lot in generator room

26
MSC Metal Cutting Band Saw
110V, single phase Located in storage room in back lot

27
GMC 7000 Diesel S/A Bob Truck w/ Hoist
Detroit 6cyl Turbo diesel engine, twin hoist, two speed rear end, Chelsea PTO NO KEY, NO TITLE, NOT RUNNING, SOLD AS IS, WHERE IS, FOR PARTS OR REPAIR AS PICTURED *located in back lot Mileage/Hours: UNKNOWN VIN: T17DD9V624311 NO TITLE

28
Large Lot of Unused Dimensional Steel Stock
Comes w/ (2) racks Angle iron , flat iron, pipe, tubing, huge lot of unused steel all for one money. *located outside on North of back lot

29
Lot of Disassembled Pallet Racking
Located outside on North end of back lot

30
Spreader Bar For Lifting Ambulance Bodies
Located outside on North End back lot

31
Lot of (16) Various Sized Shop Fans
*Located outside beside warehouse in back lot

32
Complete Contents Outside Warehouse
power mirrors, new steel truck wheels, automotive parts, stainless steel grab bars etc *located in back lot warehouse *Shop Fans sold separately

32
Lot of Misc. Emergency Light Bars, Truck Seats Etc
*Located in storage building in back lot

32
Contents of Parts Room in Back Lot
Located in storage room in back lot

33
Misc Scrap / Salvage Items in Back Lot
* all items pictured sell as one group for one money.

34
Ultra Air Refrigerated Air Dryer
Model Number: UA125AC Serial Number: U-19151 R134A Refrigerant, Single Phase, 115V *located on North wall of Admin Building

35
1997 Komatsu 25 Pneumatic Tire Forklift
LP gas engine, pneumatic tires, side shift, shuttle shift., 4660 lb lift capacity We used this lift for auction setup. Cranks, runs, drives, lifts, no brakes, Comes with propane bottle pictured. S/N: 46709A HRS: UNKNOWN

36
Champion 15HP Industrial Air Compressor
Model Number: HRA15-12 Serial Number: 770 Pump Model Number: R40A 3 phase, 480v, skid mounted *Witcher Auctions is providing a licensed electrician to unhook power from hardwired machinery after preview day at NO additional expense to the buyer. *lo...

37
Gardner Denver Electrascrew Air Compressor
30HP, 3 phase electric motor, fork tubes 62" L x 35" W x 64" T *located in electrical shop compressor room *Witcher Auctions is providing a licensed electrician to unhook power from hardwired machinery after preview day at NO additional expense to ...

38
Gardner Denver Refrigerated Air Dryer
Model Number: 700053 Serial Number: 03-05-96-5998 230V, single phase *located in electrical shop compressor room

39
Saw Stop 10" Industrial 5HP Table Saw
Model Number: ICS53480 Serial Number: 1092305660 480V, 3 phase, 3,450 RPM w/extra table, fence Saw Measures 7' L x 36" D x 34" T *located in cabinet shop

40
Saw Stop 10" 5hp Industrial Table Saw
Model Number: ICS53480 Serial Number: 1092305663 480V, 3 phase, 3,450 RPM, 5HP Fence Saw Measures 84" L x 36" D x 34" T *located in cabinet shop

41
Saw Stop 10" 5hp Industrial Table Saw
Model Number: ICS53480 Serial Number: 1092205627 84" L x 36" D x 34" T 480V, 3 Phase, 5HP, 3,450RPM *located in cabinet shop

42
Saw Stop 10" 5hp Industrial Table Saw
Model Number: 1092305664 Serial Number: 1092305664 142" L x 36" D x 34" T 480V, 3 phase, 5HP, 3,450 RPM *located in cabinet shop

43
Saw Stop 10" 5hp Industrial Table Saw
Serial Number: 1092305667 480V, 3 phase, 5H, 3,450 RPM, fence 84"L x 36"D x 34"T *Located in Finish Shop

43
Saw Stop 10" 5HP Industrial Table Saw
*parts missing, sold as is, where is Located in storage room in back lot

43
Delta Rockwell 10" Table Saw
220V, single phase Located in storage room in back lot

44
2018 Shop Fox W166 2hp Dust Collector
Serial Number:24724 220V, single phase *located in cabinet shop

45
2010 Shop Fox W1666 2hp Dust Collector
Serial Number: 20371 220V, single phase *located in cabinet shop

46
2010 Shop Fox W1666 2hp Dust Collector
Serial Number: 20193 220V, single phase *located in cabinet shop

47
2018 Shop Fox W1666 2hp Dust Collector
Serial Number: 24731 220V, single phase *located in cabinet shop

48
Dewalt DW71 Compound Miter Saw w/Table
aluminum fence, 12' L x 32' D x 39" H *CONTENTS UNDER TABLE SOLD SEPARATELY *located in cabinet shop

49
Delta 2007 33-XL 17" Laser Drill Press
Single phase, 110/120V *located in cabinet shop

50
MSC Metal Cutting Band Saw
Model Number: 40051690 Serial Number: 514145 Single phase, 110/120V *located in cabinet shop

51
Delta Rockwall 37-220 Industrial Joiner
Single phase, 110/120V Serial Number: CR3159 *located in cabinet shop

52
Rockwell 31-520 6" Industrial Belt Sander
S/N G1-9351 *located in cabinet shop

53
Delta 33X2 17" Laser Drill Press
110V, single phase, light 70" Tall *located in electrical shop

54
Dewalt DW713 10" Compound Miter Saw w/ Table
Wooden table, aluminum fence 10"L x 31"D x 42" at fence bed *Located in Finish Shop

55
Bel-O-Vac Upholstery Forming Machine
single phase, 240V @ 70"W x 70"L x 70"H footprint dimensions *Located in Finish Shop

56
Juki Industrial Sewing Machine w/ Table
72" L x 38"W x 31" T at table height, 61" overall height, 110Volt *Located in Finish Shop

61
Rockwell Vertical Band Saw
Serial Number: 3693 66" tall, 110V, single phase *Located in Finish Shop

62

63

64

65

66

67
Aluminum Shop Work Table
129 1/2" L x 36" W x 37" T, wood top

68
(4) Aluminum Sheets
approx 1/8" thick, 24"W, 94"T

69

70
Unused Stainless Steel Piano Hinges
*various sizes, mostly 8'L

71

72
Aluminum Welding Table & Aluminum Shelf
table- 53"W x 83"L x 39"T, shelf- 84"L x 24"D x 42"T

73
Aluminum Shelf w/ Casters & Aluminum Welding Table
shelf- 100"L x 32"W x 41 1/2"T, table- 6'L x 3'W x 39"T

74
(3) Aluminum Racks
rack#1-68"L x 32"W x 40"T, rack#2- 31"L x 24"W x 67 1/2"T, rack#3- 49"L x 32"W x 46"T

75
Aluminum Welding Table & Aluminum Shelf
table- 37"W x 30"D x 37"T, shelf- 48"L x 19"D x 32"T

76
(3) Wooden Shelving Units w/ Contents
shelf #1-57"L x 24"D x 50"T, shelf #2-24"W x 18"D x 36"T, shelf #3-48"L x 25"D x 57"T

77
Large Lot of Scrap Aluminum
approx 12' x 10' x 4' pile size

78
Aluminum Tool Cart & Aluminum Shelf
cart- 32"W x 38"D x 48"T, shelf- 44'W x 24'D x 34'T

79
Aluminum Rack w/ Contents
steel 2" x 2" angle iron & 4" flat bar from 13"L-65"L

80
(13) Retractable Air Hose Reels
located in various locations in main fabrication shopng & fiberglass shop, air hose reels only! *BUYER IS RESPONSIBLE FOR TAKE DOWN, DISASSEMBLY & REMOVAL

81
(9) Retractable Electric Cord Reels
located in various locations in fabrication shop and fiberglass shop, electrical cord reels only! *BUYER IS RESPONSIBLE FOR TAKE DOWN, DISASSEMBLY & REMOVAL

82
(7) Overhead Infrared Gas Heaters
located in various locations in main mfg floor & north paint shop **BUYER IS RESPONSIBLE FOR DISASSEMBLY & REMOVAL

83

84
Roll of Copper Cable & Weather Stripping
Utrex VN TC-ER-JP 600V 16AWG, sun resistant direct burial *Remainder of 500' roll

85

86
(5) Rolling Steel Racks
78"L x 36"W x 91"T *size may vary slightly

87

88
(2)94"W x 170"L x 1/8" Thick Aluminum Sheets
approximately 1/8" thick, measured with tape

89

90
Eyewash Station
*BUYER RESPONSIBLE FOR REMOVAL

91

92
Lot of Various Sized Aluminum Flat Bar
2" x 2", 1 1/2" x 1 1/2", 1" x 1" angle, majority 20'L 4" x 1/2" flat, 10'L or more

93
Lot of Various Sized Aluminum Flat Bar
3" x 5/8", 2" x 1/4", 1" x 1/2", 3" x 3/8", etc

94
(24)Pcs Aluminum "C" Channel
2" x 3" x 20' & 1" x 2" x 20", some shorter pcs, majority is 20'L sticks

95

96

97
Various Sized Aluminum Square & Rectangular Tubing
sizes include 3/4" x 3/4", 2" x 2", 1" x 4", most is 20'L, shome short pieces as pictured, (1)pc 6" x 2" x 13" "C" channgel

98

99

100

101
@ (16) Pieces of Aluminum 4"x2"x20" "C" Channel
(14)pcs 20'L, (2)pcs 128", 112" each

102
@(59) Pieces of 14' Aluminum Extruded Body Corners
Mill Finish, 375" thickness *includes partial pieces pictured in addition to the 59pcs counted

103
Floor Material Rack
*RACK ONLY, CONTENTS SOLD SEPERATELY *Large Rack used to house aluminum stock

104

105

106

107

108

109

110
Contents of Wall Fabrication Office
Dell desktop computer, office chair, file cabinet, mini fridge, & misc office supplies *unattached contents only, located on West wall of main fab building

111
Contents of Wall Fabrication Shop Supply Closet
water cooler, misc parts supplies, (3) bx new bolts, grinding wheels *Unattached CONTENTS ONLY, NO SHELVING *located on west wall of main fabrication building

112
Contents of Pallet Rack Next to Fab Office
aluminum parts bins, body brackets, shocks, wiring harnesses, tail lights, hoses, etc *CONTENTS ONLY, PALLET RACK SOLD SEPARATELY

113
92"W x 36"D x 149"T Steel Pallet / Parts Rack
*SHELF ONLY, CONTENTS SOLD SEPARATELY

114
48"W x 17"D x 67 1/2"T Wooden Bolt Bin w/ Contents
contents include unused bolts, hardware, used parts, tow hooks, partial roll of cable

115
Lot of Dimensional Steel Stock
pipe, angle iron, flat bar, tubing, channel *various sizes up to 20'L

116

117
Double Sided Steel Storage Rack
overall dimensions 16'L x 8'W x 86"T *rack is welded to building in a small places **BUYER IS RESPONSIBLE FOR CUTTING LOOSE, BRING APPROPRIATE TOOLS / EQUIPMENT

118
Dayton 110V Fan
*BUYER IS RESPONSIBLE FOR REMOVAL

119
Lot of Aluminum Pre Fab Body Parts
*CONTENTS ONLY, SHELF SELLS SEPARATELY

120
90"L x 48"W x 84"T Steel Frame Shelf
3/4" plywood shelves *Shelf only, contents sold separately

121
Lot of Aluminum Pre Fab Body Parts
includes aluminum shelf unit

122
Steel Rack & Wooden Shelf
rack- 71"W x 37"D x 76"T, shelf- 91"W x 24"D x 96"T

123
Large Lot of Aluminum Scrap
9/L x 5'W x 3'T footprint

124

125